Commit Graph

16 Commits

Author SHA1 Message Date
Martin Michlmayr
99e11334dc Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x
Enable KW_PCIE1 on QNAP TS-11x/TS-21x devices as newer revisions
(rev 1.3) have a USB 3.0 chip from Etron on PCIe port 1.  Thanks
to Marek Vasut for identifying this issue!

Cc: <stable@vger.kernel.org> # v2.6.36.x
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Tested-by: Marek Vasut <marex@denx.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-13 15:57:29 +00:00
Stephen Warren
6bb27d7349 ARM: delete struct sys_timer
Now that the only field in struct sys_timer is .init, delete the struct,
and replace the machine descriptor .timer field with the initialization
function itself.

This will enable moving timer drivers into drivers/clocksource without
having to place a public prototype of each struct sys_timer object into
include/linux; the intent is to create a single of_clocksource_init()
function that determines which timer driver to initialize by scanning
the device dtree, much like the proposed irqchip_init() at:
http://www.spinics.net/lists/arm-kernel/msg203686.html

Includes mach-omap2 fixes from Igor Grinberg.

Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-24 09:36:38 -07:00
Russell King
cb15dff479 ARM: restart: kirkwood: use new restart hook
Hook these platforms restart code into the new restart hook rather than
using arch_reset().

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05 12:57:14 +00:00
Nicolas Pitre
1b7bd28cbb ARM: mach-kirkwood: convert boot_params to atag_offset
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-08-21 17:14:57 -04:00
Lennert Buytenhek
4ee1f6b574 ARM: Remove dependency of plat-orion time code on mach directory includes.
This patch makes the various mach dirs that use the plat-orion time
code pass in timer and bridge addresses explicitly, instead of having
plat-orion get those values by including a mach dir include file --
the latter mechanism is problematic if you want to support multiple
ARM platforms in the same kernel image.

Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-03-03 16:27:01 -05:00
Martin Michlmayr
ce56d16997 Kirkwood: Add support for 6282 based QNAP devices
Add support for the QNAP NAS devices based on Marvell's 6282 Kirkwood
chip (TS-119P+, TS-219P+ and TS-419P+).  The differences to the 6281
based devices are:
 - Ethernet PHY address
 - GPIOs used for buttons (TS-119P+/TS-219P+)

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Saeed Bishara <saeed.bishara@gmail.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-12-07 13:50:14 -05:00
Nicolas Pitre
6451d7783b arm: remove machine_desc.io_pg_offst and .phys_io
Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.

The various declarations were removed using the following script:

  grep -rl MACHINE_START arch/arm | xargs \
  sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'

[ Initial patch was from Jeremy Kerr, example script from Russell King ]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-20 00:27:46 -04:00
Saeed Bishara
ffd58bd2e4 [ARM] Kirkwood: add support for PCIe1
This patch extends the kirkwood's PCIe support up to 2 controllers as in the 6282 devices.

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-07-16 22:01:59 -04:00
Martin Michlmayr
128190ebe9 [ARM] Kirkwood: Add MPP44 (board ID) on TS-219
MPP44 can be used to differentiate between one-bay (TS-11x) and
two-bay (TS-21x) devices.

According to an engineer from QNAP, the setting of MPP44 depends
on the firmware rather than hardware.  Presumably, this means
that you could fake the MPP44 value by changing the boot loader.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-07-16 22:01:26 -04:00
Benjamin Zores
266a2458ce [ARM] Kirkwood: update MPP definition.
Add MPP definitions for Marvell Kirkwood 88F6282 revision.
Update some defines to reflect datasheet's MPP names.

Signed-off-by: Benjamin Zores <benjamin.zores@alcatel-lucent.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-07-16 22:01:26 -04:00
Martin Michlmayr
8d27b2f798 [ARM] Kirkwood: Remove code duplication in QNAP setup files
Remove the code duplication found in the setup files of TS-219 and
TS-41x.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-13 12:14:24 -05:00
Martin Michlmayr
287989cac2 [ARM] Kirkwood: Add QNAP TS-110/TS-210 to Kconfig help text
Add two new models from QNAP to the help text.  They are compatible
with the TS-119/TS-219 and therefore supported by the current code.
The only difference is that they have less RAM (256 MB instead of
512 MB), a slower CPU (800 MHz vs 1.2 GHz) and a plastic case.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-13 12:14:24 -05:00
Martin Michlmayr
b421950cdc [ARM] Kirkwood: Add MPP36 for QNAP TS-11x/TS-21x
MPP36 is used on the QNAP TS-11x/TS-21x devices to indicate how
much RAM there is: it's high for 512 MB RAM (TS-x19) and low for
256 MB (TS-x10).  While this may not be very useful, let's add
it for completeness.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-13 12:14:23 -05:00
John Holland
c55bf102b6 [ARM] Kirkwood: enable eSATA on QNAP TS-219P
Initialize PCI/PCIe on the QNAP TS-119, TS-219 and TS-219P hardware
allowing the use of the discrete eSATA controller connected to the PCIe
bus in the TS-219P.

Signed-off-by: John Holland <john.holland@cellent-fs.de>
Tested-by: Thomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-24 11:56:00 -04:00
Thomas Reitmayr
385aa9e701 [ARM] Kirkwood: Correct MPP for SATA activity/presence LEDs of QNAP TS-119/TS-219.
For the QNAP TS-119 and TS-219 the wrong MPPs were used for the SATA
activity/presence LEDs. The new settings make these LEDs work as
expected.

Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-20 22:17:32 -04:00
Martin Michlmayr
586dcf279b [ARM] Kirkwood: Add support for QNAP TS-119/TS-219 Turbo NAS
Add support for the QNAP TS-119 and TS-219 Turbo NAS devices.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-23 16:12:38 -04:00