This patch converts the DS1WM driver into an MFD cell. It also
calculates the bus_shift parameter from the memory resource size.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Some I2C controllers have high overheads for setting up I2C operations
which makes the register cache setup on startup excessively slow since
it does a lot of small transactions. Reduce this overhead by doing a
bulk read of the entire register bank and filtering out what we don't
need later.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
The battery driver tends to take quite some time to initialize
(100ms-300ms is quite typical).
This patch initializes the batter driver asynchronously, so that other
things in the kernel can initialize in parallel to this 300 msec.
As part of this, the battery driver had to move to the back
of the ACPI init order (hence the Makefile change).
Without this move, the next ACPI driver would just block
on the ACPI/devicee layer semaphores until the battery driver was
done anyway, not gaining any boot time.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Explicitly note in the documentation that the Acer Aspire One is not
supported.
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Cleanup the failure cleanup handling for brightness and email led.
[cc: Split out from another patch]
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The Aspire One's ACPI-WMI interface is a placeholder that does nothing,
and the invalid results that we get from it are now causing userspace
problems as acer-wmi always returns that the rfkill is enabled (i.e. the
radio is off, when it isn't). As it's hardware controlled, acer-wmi
isn't needed on the Aspire One either.
Thanks to Andy Whitcroft at Canonical for tracking down Ubuntu's userspace
issues to this.
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Reported-by: Andy Whitcroft <apw@canonical.com>
Cc: stable@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
acpi_video_device_write_state() and friends now return ssize_t,
while the constify patch assumed it was still int.
Signed-off-by: Len Brown <len.brown@intel.com>
Refactor and redesign the brightness control backend...
In order to fix bugzilla #11750...
Add a new brightness control mode: support direct NVRAM checkpointing
of the backlight level (i.e. store directly to NVRAM without the need
for UCMS calls), and use that together with the EC-based control.
Disallow UCMS+EC, thus avoiding races with the SMM firmware.
Switch the models that define HBRV (EC Brightness Value) in the DSDT
to the new mode. These are: T40-T43, R50-R52, R50e, R51e, X31-X41.
Change the default for all other IBM ThinkPads to UCMS-only. The
Lenovo models already default to UCMS-only.
Reported-by: Alexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Enhance debugging messages for the fan subdriver.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Enhance debugging messages for the hotkey subdriver.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Enhance debugging messages for all rfkill subdrivers in thinkpad-acpi.
Also, log a warning if the deprecated sysfs attributes are in use.
These attributes are going to be removed sometime in 2010.
There is an user-visible side-effect: we now coalesce attempts to
enable/disable bluetooth or WWAN in the procfs interface, instead of
hammering the firmware with multiple requests.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Some of the ThinkPad LEDs indicate critical conditions that can cause
data loss or cause hardware damage when ignored (e.g. force-ejecting
a powered up bay; ignoring a failing battery, or empty battery; force-
undocking with the dock buses still active, etc).
On almost all ThinkPads, LED access is write-only, and the firmware
usually does fire-and-forget signaling on them, so you effectively
lose whatever message the firmware was trying to convey to the user
when you override the LED state, without any chance to restore it.
Restrict access to all LEDs that can convey important alarms, or that
could mislead the user into incorrectly operating the hardware. This
will make the Lenovo engineers less unhappy about the whole issue.
Allow users that really want it to still control all LEDs, it is the
unaware user that we have to worry about.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
The HKEY disable functionality basically cripples the entire event
model of the ThinkPad firmware and of the thinkpad-acpi driver.
Remove this functionality from the driver. HKEY must be enabled at
all times while thinkpad-acpi is loaded, and disabled otherwise.
For sysfs, according to the sysfs ABI and the thinkpad-acpi sysfs
rules of engagement, we will just remove the attributes. This will be
done in two stages: disable their function now, after two kernel
releases, remove the attributes.
For procfs, we call WARN(). If nothing triggers it, I will simply
remove the enable/disable commands entirely in the future along with
the sysfs attributes.
I don't expect much, if any fallout from this. There really isn't any
reason to mess with hotkey_enable or with the enable/disable commands
to /proc/acpi/ibm/hotkey, and this has been true for years...
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Add a debug helper that discloses the TGID of the userspace task
attempting to access the driver. This is highly useful when dealing
with bug reports, since often the user has no idea that some userspace
application is accessing thinkpad-acpi...
Also add a helper to log warnings about sysfs attributes that are
deprecated.
Use the new helpers to issue deprecation warnings for bluetooth_enable
and wwan_enabled, that have been deprecated for a while, now.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Add missing log levels in a standalone commit, to avoid dependencies in
future unrelated changes, just because they wanted to use one of the
missing log levels.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix the vdbg_printk macro definition to be sane when
CONFIG_THINKPAD_ACPI_DEBUG is undefined, and move the mess into a file
section of its own.
This doesn't change anything in the current code, but future code will
need the proper behaviour.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
The driver was renamed two years ago, on 2.6.21. Drop the old
compatibility alias, we have given everybody quite enough time
to update their configs to the new name.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Instead of just sprintf() into the page-sized buffer provided
by the sysfs/device_attribute API, we use snprintf with PAGE_SIZE
as an additional safeguard.
Signed-off-by: Martin Lucina <mato@kotelna.sk>
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Len Brown <len.brown@intel.com>
This patch adds MODULE_DEVICE_TABLE() to panasonic-laptop.c in order
to ensure automatic loading of the module on systems with the respective
"MAT*" ACPI devices.
Signed-off-by: Martin Lucina <mato@kotelna.sk>
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Add a WMI driver for Dell laptops. Currently it does nothing but send a
generic input event when a button with a picture of a battery on it is
pressed, but maybe other uses will appear over time.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
(This is an update to the patch presented earlier in
http://lkml.org/lkml/2008/12/8/284, with new error handling.)
This patch sets the power of PnP ACPI devices to D0 when they
are activated and to D3 when they are disabled. The latter is
in correspondence with the ACPI 3.0 specification, whereas the
former is added in order to be able to power up a device after
it has been previously disabled (or when booting up a system).
(As a consequence, the patch makes the PnP ACPI code more ACPI
compliant.)
Section 6.2.2 of the ACPI Specification (at least versions 1.0b
and 3.0a) states: "Prior to running this control method [_DIS],
the OS[PM] will have already put the device in the D3 state."
Unfortunately, there is no clear statement as to when to put
a device in the D0 state. :-( Therefore, the patch executes the
method calls as _PS3/_DIS and _SRS/_PS0. What is clear: "If the
device is disabled, _SRS enables the device at the specified
resources." (From the ACPI 3.0a Specification.)
The patch fixes a problem with some IBM ThinkPads (at least the
600E and the 600X) where the serial ports have a dedicated
power source that needs to be brought up before the serial port
can be used. Without this patch, the serial port is enabled
but has no power. (In the past, the tpctl utility had to be
utilized to turn on the power, but support for this feature
stopped with version 5.9 as it did not support the more recent
kernel versions.)
The error handlers that handle any errors that can occur during
the power up/power down phases return the error codes to the
caller directly. Comments welcome! :-)
No regressions were observed on hardware that does not require
this patch.
The patch is applied against 2.6.27.x.
Signed-off-by: Witold Szczeponik <Witold.Szczeponik@gmx.net>
Acked-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
All logical processors with APIC ID values of 255 and greater will have their
APIC reported through Processor X2APIC structure (type-9 entry type) and all
logical processors with APIC ID less than 255 will have their APIC reported
through legacy Processor Local APIC (type-0 entry type) only. This is the
same case even for NMI structure reporting.
The Processor X2APIC Affinity structure provides the association between the
X2APIC ID of a logical processor and the proximity domain to which the logical
processor belongs.
For OSPM, Procssor IDs outside the 0-254 range are to be declared as Device()
objects in the ACPI namespace.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: remove compat stuff
HID: constify arrays of struct apple_key_translation
HID: add support for Kye/Genius Ergo 525V
HID: Support Apple mini aluminum keyboard
HID: support for Kensington slimblade device
HID: DragonRise game controller force feedback driver
HID: add support for another version of 0e8f:0003 device in hid-pl
HID: fix race between usb_register_dev() and hiddev_open()
HID: bring back possibility to specify vid/pid ignore on module load
HID: make HID_DEBUG defaults consistent
HID: autosuspend -- fix lockup of hid on reset
HID: hid_reset_resume() needs to be defined only when CONFIG_PM is set
HID: fix USB HID devices after STD with autosuspend
HID: do not try to compile PM code with CONFIG_PM unset
HID: autosuspend support for USB HID
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
trivial: Update my email address
trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
trivial: Fix misspelling of "Celsius".
trivial: remove unused variable 'path' in alloc_file()
trivial: fix a pdlfush -> pdflush typo in comment
trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
trivial: wusb: Storage class should be before const qualifier
trivial: drivers/char/bsr.c: Storage class should be before const qualifier
trivial: h8300: Storage class should be before const qualifier
trivial: fix where cgroup documentation is not correctly referred to
trivial: Give the right path in Documentation example
trivial: MTD: remove EOL from MODULE_DESCRIPTION
trivial: Fix typo in bio_split()'s documentation
trivial: PWM: fix of #endif comment
trivial: fix typos/grammar errors in Kconfig texts
trivial: Fix misspelling of firmware
trivial: cgroups: documentation typo and spelling corrections
trivial: Update contact info for Jochen Hein
trivial: fix typo "resgister" -> "register"
...
Just delete the proc tty usage in the driver as it's not needed and will
go away when it switches over to a usb-serial driver. This fixes the
build error in the driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for all Quatech usb to serial devices.
Based on an original driver from Quatech.
Cleaned up and forward ported by me.
It's a mess, uses it's own tty layer interface, and the coding style is
horrible.
Cc: Tim Gobeli <tgobeli@quatech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Linux wireless developers don't want to hear anything about the
staging wireless drivers, for a wide range of miopic reasons.
The following patch, based on a patch from Johannes Berg, tries to
document this issue a bit better.
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2 errors left, but they are minor.
Lots of warnings also fixed up.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2 errors left, but they are minor.
Lots of warnings also fixed up.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2 errors left, but they are minor.
Lots of warnings also fixed up.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mostly all line length issues.
Skipped the control.h file as it makes sense to leave it alone.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Should use NULL for a pointer, not 0, otherwise sparse complains.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all of the static function warnings that sparse complains
about.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the code is in the kernel tree, it's no longer needed.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the code is in the kernel tree, it's no longer needed.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the code is in the kernel tree, it's no longer needed.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
line6 code has lots of dependencies on ALSA (and build errors),
so express that in Kconfig.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the line6 driver to the build system.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
bus_id is now gone in the linux-next tree, so replace it with dev_name()
so the code works properly.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is an experimental Linux driver for the guitar amp, cab, and
effects modeller PODxt Pro by Line6 (and similar devices), supporting
the following features:
- Reading/writing individual parameters
- Reading/writing complete channel, effects setup, and amp setup data
- Channel switching
- Virtual MIDI interface
- Tuner access
- Playback/capture/mixer device for any ALSA-compatible PCM audio
application
- Signal routing (record clean/processed guitar signal, re-amping)
Moreover, preliminary support for the Variax Workbench is included.
From: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the Ralink RT3070 driver from the company that does horrible
things like reading a config file from /etc. However, the driver that
is currently under development from the wireless development community
is not working at all yet, so distros and users are using this version
instead (quite common hardware on a lot of netbook machines).
So here is this driver, for now, until the wireless developers get a
"clean" version into the main tree, or until this version is cleaned up
sufficiently to move out of the staging tree.
Ported to the Linux build system, fixed lots of build issues, forward
ported to the current kernel version, and other minor cleanups were all
done by me.
Cc: Linux wireless <linux-wireless@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
List some of the remaining issues in the code.
Cc: Anas Nashif <anas.nashif@intel.com>
Cc: Marcin Obara <marcin.obara@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This resolves a lot of the more obvious sparse warnings in the code.
There still are some major problems in the ioctl handlers dealing with
user and kernel pointers that this patch does not resolve, that needs to
be addressed still.
Also, the locking seems to be a bit strange in places, which sparse
points out, that too need to be resolved.
Cc: Anas Nashif <anas.nashif@intel.com>
Cc: Marcin Obara <marcin.obara@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This resolves the outstanding scripts/checkpatch.pl warnings
Cc: Anas Nashif <anas.nashif@intel.com>
Cc: Marcin Obara <marcin.obara@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's not needed now that we are now in the main kernel tree.
Cc: Anas Nashif <anas.nashif@intel.com>
Cc: Marcin Obara <marcin.obara@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Intel Management Engine Interface (aka HECI: Host Embedded
Controller Interface ) enables communication between the host OS and
the Management Engine firmware. MEI is bi-directional, and either the
host or Intel AMT firmware can initiate transactions.
The core hardware architecture of Intel Active Management Technology
(Intel AMT) is resident in firmware. The micro-controller within the
chipset's graphics and memory controller (GMCH) hub houses the
Management Engine (ME) firmware, which implements various services
on behalf of management applications.
Some of the ME subsystems that can be access via MEI driver:
- Intel(R) Quiet System Technology (QST) is implemented as a firmware
subsystem that runs in the ME. Programs that wish to expose the
health monitoring and fan speed control capabilities of Intel(R) QST
will need to use the MEI driver to communicate with the ME sub-system.
- ASF is the "Alert Standard Format" which is an DMTF manageability
standard. It is implemented in the PC's hardware and firmware, and is
managed from a remote console.
Most recent Intel desktop chipsets have one or more of the above ME
services. The MEI driver will make it possible to support the above
features on Linux and provides applications access to the ME and it's
features.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Marcin Obara <marcin.obara@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Not all of these files needed to be included, clean up the list.
Cc: Ashwin Ganti <ashwin.ganti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's nicer than doing kmalloc/memset.
Also check the return value of all allocations, one was previously not
being checked properly.
Cc: Ashwin Ganti <ashwin.ganti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Everything needs to be static, as sparse complains and you don't want to
polute the global kernel symbol namespace. So mark everything as such
and move one function around to prevent a forward declaration from being
needed.
Cc: Ashwin Ganti <ashwin.ganti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes up a number of scripts/codingstyle.pl warnings and errors
Cc: Ashwin Ganti <ashwin.ganti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The p9auth.h file is not needed, move the stuff into p9auth.c file and
delete it.
Cc: Ashwin Ganti <ashwin.ganti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
current->uid is no longer allowed in the 2.6.29 kernel, so use
the proper credential api to be able to alter the uid and euid values.
Note, this now builds properly, hopefully still works properly, would be
good for someone to test it out...
Cc: Ashwin Ganti <ashwin.ganti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a driver that adds Plan 9 style capability device
implementation.
From: Ashwin Ganti <ashwin.ganti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The code only gets built if this option is enabled, so don't
check for it in the code again.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
devfs is long dead and burried, don't check for it, as it doesn't make
any sense to do so.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Only include a file if it's needed.
Also remove some unused comments from the boilerplate text.
And delete some empty .h files
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Only include a file if it's needed.
Also remove some unused comments from the boilerplate text.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This isn't a DLL, so we don't need this :)
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
proc_fs.c needs to include proc_fs.h
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
They are no longer needed now that we are in the kernel.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix some static symbols and drop the kernel version checks.
Also comment out the init and exit functions, as they don't get used
anymore.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
() isn't valid, you need to put (void).
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's u16 in kernelspace, not WORD.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's u32 in kernelspace, not DWORD.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's u64 in kernelspace, not QWORD.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's u8 in kernelspace, not BYTE.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No one is using it.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Just make it const
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Yeah, it's a buffer, but this sure can't hurt as it's not easy to unwind
where it's coming from.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's not used and is not needed.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's not used and is not needed.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's not used and is not needed.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's not used and is not needed.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It wasn't used and isn't needed.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It wasn't used and isn't needed.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
