Altnames are accessed under RCU (dev_get_by_name_rcu())
but freed by kfree() with no synchronization point.
Each node has one or two allocations (node and a variable-size
name, sometimes the name is netdev->name). Adding rcu_heads
here is a bit tedious. Besides most code which unlists the names
already has rcu barriers - so take the simpler approach of adding
synchronize_rcu(). Note that the one on the unregistration path
(which matters more) is removed by the next fix.
Fixes: ff92741270 ("net: introduce name_node struct to be used in hashlist")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's currently possible to create an altname conflicting
with an altname or real name of another device by creating
it in another netns and moving it over:
[ ~]$ ip link add dev eth0 type dummy
[ ~]$ ip netns add test
[ ~]$ ip -netns test link add dev ethX netns test type dummy
[ ~]$ ip -netns test link property add dev ethX altname eth0
[ ~]$ ip -netns test link set dev ethX netns 1
[ ~]$ ip link
...
3: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff
...
5: ethX: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 26:b7:28:78:38:0f brd ff:ff:ff:ff:ff:ff
altname eth0
Create a macro for walking the altnames, this hopefully makes
it clearer that the list we walk contains only altnames.
Which is otherwise not entirely intuitive.
Fixes: 36fbf1e52b ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dev_get_valid_name() overwrites the netdev's name on success.
This makes it hard to use in prepare-commit-like fashion,
where we do validation first, and "commit" to the change
later.
Factor out a helper which lets us save the new name to a buffer.
Use it to fix the problem of notification on netns move having
incorrect name:
5: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff
6: eth1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether 1e:4a:34:36:e3:cd brd ff:ff:ff:ff:ff:ff
[ ~]# ip link set dev eth0 netns 1 name eth1
ip monitor inside netns:
Deleted inet eth0
Deleted inet6 eth0
Deleted 5: eth1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether be:4d:58:f9:d5:40 brd ff:ff:ff:ff:ff:ff new-netnsid 0 new-ifindex 7
Name is reported as eth1 in old netns for ifindex 5, already renamed.
Fixes: d90310243f ("net: device name allocation cleanups")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With CONFIG_TI_K3_AM65_CPSW_NUSS=y and CONFIG_TI_ICSSG_PRUETH=m,
k3-cppi-desc-pool.o is linked to a module and also to vmlinux even though
the expected CFLAGS are different between builtins and modules.
The build system is complaining about the following:
k3-cppi-desc-pool.o is added to multiple modules: icssg-prueth
ti-am65-cpsw-nuss
Introduce the new module, k3-cppi-desc-pool, to provide the common
functions to ti-am65-cpsw-nuss and icssg-prueth.
Fixes: 128d5874c0 ("net: ti: icssg-prueth: Add ICSSG ethernet driver")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20231018064936.3146846-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Because group consistency is non-atomic between parent (filedesc) and children
(inherited) events, it is possible for PERF_FORMAT_GROUP read() to try and sum
non-matching counter groups -- with non-sensical results.
Add group_generation to distinguish the case where a parent group removes and
adds an event and thus has the same number, but a different configuration of
events as inherited groups.
This became a problem when commit fa8c269353 ("perf/core: Invert
perf_read_group() loops") flipped the order of child_list and sibling_list.
Previously it would iterate the group (sibling_list) first, and for each
sibling traverse the child_list. In this order, only the group composition of
the parent is relevant. By flipping the order the group composition of the
child (inherited) events becomes an issue and the mis-match in group
composition becomes evident.
That said; even prior to this commit, while reading of a group that is not
equally inherited was not broken, it still made no sense.
(Ab)use ECHILD as error return to indicate issues with child process group
composition.
Fixes: fa8c269353 ("perf/core: Invert perf_read_group() loops")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231018115654.GK33217@noisy.programming.kicks-ass.net
Allow to use whole address range in MMU context mmap which is up to 48
bits. Return invalid argument from MMU context mmap in case address is
not aligned to MMU page size, address is below MMU page size or address
is greater then 47 bits.
This fixes problem disallowing to run large models on VPU4
Signed-off-by: Wludzik, Jozef <jozef.wludzik@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018110113.547208-1-stanislaw.gruszka@linux.intel.com
This reverts commit 645d694559.
The commit cause issues with memory access from the device side.
Switch back to write-combined memory mappings until the issues
will be properly addressed.
Add extra wmb() needed when boot_params->save_restore_ret_address() is
modified.
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231017121353.532466-1-stanislaw.gruszka@linux.intel.com
-----BEGIN PGP SIGNATURE-----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=M/4J
-----END PGP SIGNATURE-----
Merge tag 'nf-23-10-18' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
First patch, from Phil Sutter, reduces number of audit notifications
when userspace requests to re-set stateful objects.
This change also comes with a selftest update.
Second patch, also from Phil, moves the nftables audit selftest
to its own netns to avoid interference with the init netns.
Third patch, from Pablo Neira, fixes an inconsistency with the "rbtree"
set backend: When set element X has expired, a request to delete element
X should fail (like with all other backends).
Finally, patch four, also from Pablo, reverts a recent attempt to speed
up abort of a large pending update with the "pipapo" set backend.
It could cause stray references to remain in the set, which then
results in a double-free.
* tag 'nf-23-10-18' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: revert do not remove elements if set backend implements .abort
netfilter: nft_set_rbtree: .deactivate fails if element has expired
selftests: netfilter: Run nft_audit.sh in its own netns
netfilter: nf_tables: audit log object reset once per table
====================
Link: https://lore.kernel.org/r/20231018125605.27299-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* prevent value bounce/glitch in rfkill GPIO probe
* fix lockdep report in rfkill
* fix error path leak in mac80211 key handling
* use system_unbound_wq for wiphy work since it
can take longer
-----BEGIN PGP SIGNATURE-----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=Sth1
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-10-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
A few more fixes:
* prevent value bounce/glitch in rfkill GPIO probe
* fix lockdep report in rfkill
* fix error path leak in mac80211 key handling
* use system_unbound_wq for wiphy work since it
can take longer
* tag 'wireless-2023-10-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
net: rfkill: reduce data->mtx scope in rfkill_fop_open
net: rfkill: gpio: prevent value glitch during probe
wifi: mac80211: fix error path key leak
wifi: cfg80211: use system_unbound_wq for wiphy work
====================
Link: https://lore.kernel.org/r/20231018071041.8175-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .probe() function would allocate the necessary space and ensure that
the library call sizes the number of statistics but the callbacks
necessary to fetch the name and values were not wired up.
Reported-by: Justin Chen <justin.chen@broadcom.com>
Fixes: f68d08c437 ("net: phy: bcm7xxx: Add EPHY entry for 72165")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231017205119.416392-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the blamed commit below, I completely forgot to release the acquired
resources before erroring out in the TCP BPF code, as reported by Dan.
Address the issues by replacing the bogus return with a jump to the
relevant cleanup code.
Fixes: 419ce133ab ("tcp: allow again tcp_disconnect() when threads are waiting")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/8f99194c698bcef12666f0a9a999c58f8b1cb52c.1697557782.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Theune says:
I upgraded from 6.1.38 to 6.1.55 this morning and it broke my traffic shaping script,
leaving me with a non-functional uplink on a remote router.
A 'rt' curve cannot be used as a inner curve (parent class), but we were
allowing such configurations since the qdisc was introduced. Such
configurations would trigger a UAF as Budimir explains:
The parent will have vttree_insert() called on it in init_vf(),
but will not have vttree_remove() called on it in update_vf()
because it does not have the HFSC_FSC flag set.
The qdisc always assumes that inner classes have the HFSC_FSC flag set.
This is by design as it doesn't make sense 'qdisc wise' for an 'rt'
curve to be an inner curve.
Budimir's original patch disallows users to add classes with a 'rt'
parent, but this is too strict as it breaks users that have been using
'rt' as a inner class. Another approach, taken by this patch, is to
upgrade the inner 'rt' into a 'sc', warning the user in the process.
It avoids the UAF reported by Budimir while also being more permissive
to bad scripts/users/code using 'rt' as a inner class.
Users checking the `tc class ls [...]` or `tc class get [...]` dumps would
observe the curve change and are potentially breaking with this change.
v1->v2: https://lore.kernel.org/all/20231013151057.2611860-1-pctammela@mojatatu.com/
- Correct 'Fixes' tag and merge with revert (Jakub)
Cc: Christian Theune <ct@flyingcircus.io>
Cc: Budimir Markovic <markovicbudimir@gmail.com>
Fixes: b3d26c5702 ("net/sched: sch_hfsc: Ensure inner classes have fsc curve")
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231017143602.3191556-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mii_bus API conversion to read_c45() and write_c45() did not cover
the mdio-mux driver before read() and write() were made C22-only.
This broke arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso.
The -EOPNOTSUPP from mdiobus_c45_read() is transformed by
get_phy_c45_devs_in_pkg() into -EIO, is further propagated to
of_mdiobus_register() and this makes the mdio-mux driver fail to probe
the entire child buses, not just the PHYs that cause access errors.
Fix the regression by introducing special c45 read and write accessors
to mdio-mux which forward the operation to the parent MDIO bus.
Fixes: db1a63aed8 ("net: phy: Remove fallback to old C45 method")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231017143144.3212657-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 75eefc6c59 ("tcp: tsq: add a shortcut in tcp_small_queue_check()")
we allowed to send an skb regardless of TSQ limits being hit if rtx queue
was empty or had a single skb, in order to better fill the pipe
when/if TX completions were slow.
Then later, commit 75c119afe1 ("tcp: implement rb-tree based
retransmit queue") accidentally removed the special case for
one skb in rtx queue.
Stefan Wahren reported a regression in single TCP flow throughput
using a 100Mbit fec link, starting from commit 65466904b0 ("tcp: adjust
TSO packet sizes based on min_rtt"). This last commit only made the
regression more visible, because it locked the TCP flow on a particular
behavior where TSQ prevented two skbs being pushed downstream,
adding silences on the wire between each TSO packet.
Many thanks to Stefan for his invaluable help !
Fixes: 75c119afe1 ("tcp: implement rb-tree based retransmit queue")
Link: https://lore.kernel.org/netdev/7f31ddc8-9971-495e-a1f6-819df542e0af@gmx.net/
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20231017124526.4060202-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sometimes Tx is completed immediately after doorbell is updated, which
causes Tx completion routing to update completion bytes before the
same packet bytes are updated in sent bytes in transmit function, hence
hitting BUG_ON() in dql_completed(). To avoid this, update BQL
sent bytes before ringing doorbell.
Fixes: 37d79d0596 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://lore.kernel.org/r/20231017105030.2310966-1-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 7d5cb68af6 (perf/benchmark: add a new benchmark for
seccom_unotify) added a reference to __NR_seccomp into perf. This is
fine as it added also a definition of __NR_seccomp for 64-bit. But it
failed to do so for 32-bit as instead of ifndef, ifdef was used.
Fix this typo (so fix the build of perf on 32-bit).
Fixes: 7d5cb68af6 (perf/benchmark: add a new benchmark for seccom_unotify)
Cc: Andrei Vagin <avagin@google.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231017083019.31733-1-jirislaby@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
It may happen that the work to destroy a queue
(for example nvmet_tcp_release_queue_work()) is started while
an auth-send or auth-receive command is still completing.
nvmet_sq_destroy() will block, waiting for all the references
to the sq to be dropped, the last reference is then
dropped when nvmet_req_complete() is called.
When this happens, both nvmet_sq_destroy() and
nvmet_execute_auth_send()/_receive() will free the dhchap pointers by
calling nvmet_auth_sq_free().
Since there isn't any lock, the two threads may race against each other,
causing double frees and memory corruptions, as reported by KASAN.
Reproduced by stress blktests nvme/041 nvme/042 nvme/043
nvme nvme2: qid 0: authenticated with hash hmac(sha512) dhgroup ffdhe4096
==================================================================
BUG: KASAN: double-free in kfree+0xec/0x4b0
Call Trace:
<TASK>
kfree+0xec/0x4b0
nvmet_auth_sq_free+0xe1/0x160 [nvmet]
nvmet_execute_auth_send+0x482/0x16d0 [nvmet]
process_one_work+0x8e5/0x1510
Allocated by task 191846:
__kasan_kmalloc+0x81/0xa0
nvmet_auth_ctrl_sesskey+0xf6/0x380 [nvmet]
nvmet_auth_reply+0x119/0x990 [nvmet]
Freed by task 143270:
kfree+0xec/0x4b0
nvmet_auth_sq_free+0xe1/0x160 [nvmet]
process_one_work+0x8e5/0x1510
Fix this bug by calling nvmet_req_complete() only after freeing the
pointers, so we will prevent the race by holding the sq reference.
V2: remove redundant code
Fixes: db1312dd95 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
User can request more metadata bytes than the device will write. Ensure
kernel buffer is initialized so we're not leaking unsanitized memory on
the copy-out.
Fixes: 0b7f1f26f9 ("nvme: use the block layer for userspace passthrough metadata")
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This patches fixes commit 51d674a5e4 "NFSv4.1: use
EXCHGID4_FLAG_USE_PNFS_DS for DS server", purpose of that
commit was to mark EXCHANGE_ID to the DS with the appropriate
flag.
However, connection to MDS can return both EXCHGID4_FLAG_USE_PNFS_DS
and EXCHGID4_FLAG_USE_PNFS_MDS set but previous patch would only
remember the USE_PNFS_DS and for the 2nd EXCHANGE_ID send that
to the MDS.
Instead, just mark the pnfs path exclusively.
Fixes: 51d674a5e4 ("NFSv4.1: use EXCHGID4_FLAG_USE_PNFS_DS for DS server")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that we check the layout pointer and validity after dereferencing
it in ff_layout_mirror_prepare_stats.
Fixes: 08e2e5bc6c ("pNFS/flexfiles: Clean up layoutstats")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We are not allowed to call pnfs_mark_matching_lsegs_return() without
also holding a reference to the layout header, since doing so could lead
to the reference count going to zero when we call
pnfs_layout_remove_lseg(). This again can lead to a hang when we get to
nfs4_evict_inode() and are unable to clear the layout pointer.
pnfs_layout_return_unused_byserver() is guilty of this behaviour, and
has been seen to trigger the refcount warning prior to a hang.
Fixes: b6d49ecd10 ("NFSv4: Fix a pNFS layout related use-after-free race when freeing the inode")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
A fairly large set of fixes here but all driver specific, the biggest
block is Johan's work shaking out issues with device setup and teardown
for the wcd938x driver which is a relatively large but clearly broken
down set of changes.
There is one core helper function added as part of a fix for wsa-macro.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUv6LwACgkQJNaLcl1U
h9ARKQf+NeyoX/Hu9p0nL5LOzgRaV2QDvWL6k4O06/jHs0TRS6csce1XqrZaZI8Q
1JFFC++oop8AIEbnQPX8Iv6Zmaf3IxbxBx1/b8mMeE9SxW2tJjxN2JHft2W3GcD9
/cdTnAzkfTlS1WEFhMjCq0rCkmWcsREI6RKFI1g7z7X9WDF3sPYLxnoQrfmVeud6
1Rv784J+flQSfpDrjn2peSFno9XEOZKTjaUuCpJpy1pOq0kiR0lVx/6yM/D9wMJg
e1mEeq9HcuvMqjQsTh3qbfNklY2xEthxnRrvqZXBrDcvh24utFa2YRGCXHZoKtQF
dHVsiQ8XIztnBOpLZJSpnzpXdcnJMA==
=rQYT
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.6-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.6
A fairly large set of fixes here but all driver specific, the biggest
block is Johan's work shaking out issues with device setup and teardown
for the wcd938x driver which is a relatively large but clearly broken
down set of changes.
There is one core helper function added as part of a fix for wsa-macro.
A fix for the npcm-fiu driver in cases where there are no dummy bytes
during reads.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUf640ACgkQJNaLcl1U
h9C5cQf+K+ml3dwDRfmQX6U9sEwfCbwqf1kf3paZmGE1Vf515+mbZY6Lw7FBOpCa
UkoVnsN++qfT77dUSMFYZxKgYhAGdfHLgtgxJefyePEUxxVbzivzmMHDyQPHfMJG
jz/PnG3aFc2OSxnOb2Kr4J2Fla+9orSebMwvg6CbJnkTtcsEpAoTn3cc0C+C7z9t
C/vLl+F0grf5vgkbLCmazZZ18YfKNSb635nzh9+PXxfnBk4/D4oO/SO8foX4Dh7A
kaX1YRj9X98dI4+KsK4HcA004Dndl2jCamDGFzb7uKJQplFPosuoH2vBapZ5NUMh
X0/vpq1Sbur1EGrSwyD/jkovyuChRg==
=TlYc
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6-6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"A fix for the npcm-fiu driver in cases where there are no dummy bytes
during reads"
* tag 'spi-fix-v6-6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: npcm-fiu: Fix UMA reads when dummy.nbytes == 0
A straightforward fix from Johan for a long standing bug in cases where
we both have regmaps without devices and something is using
dev_get_regmap().
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUv6g4ACgkQJNaLcl1U
h9BAFAf/Xcx9jWPmYJ4Peon5j25nkzuMn0A4aka2uqfr5juTFZYXi3milp5hTpfD
tTC0cgBaADKCTXPU2aDrQeiHd1Rr18sOxAUdQWr7POPsuT+LJFpTjl5agNgPRa9a
LqdPA+KfrYV1snIC+sQDhEuHX1UtxDdXCS4Q0KpxIiEZGt3/Z6kDysWEQCPR8m1e
uNauKz2GaDB1ejXnEnZFMjkleKbBPc8qMF8A/c2lTayIjDn1xYVbj9IzHKoIP+au
S9eMBLrnPNPqhOJxe0pQKIfSz5nbMls/NCZRD/IQN8TTQ/Z6LActfUoKMS09hR6p
t8aEB9YCm8Wb+5ad8A0e3molsylvGQ==
=RWQo
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A straightforward fix from Johan for a long standing bug in cases
where we both have regmaps without devices and something is using
dev_get_regmap()"
* tag 'regmap-fix-v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix NULL deref on lookup
If we specify a valid CQ ring address but an invalid SQ ring address,
we'll correctly spot this and free the allocated pages and clear them
to NULL. However, we don't clear the ring page count, and hence will
attempt to free the pages again. We've already cleared the address of
the page array when freeing them, but we don't check for that. This
causes the following crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Oops [#1]
Modules linked in:
CPU: 0 PID: 20 Comm: kworker/u2:1 Not tainted 6.6.0-rc5-dirty #56
Hardware name: ucbbar,riscvemu-bare (DT)
Workqueue: events_unbound io_ring_exit_work
epc : io_pages_free+0x2a/0x58
ra : io_rings_free+0x3a/0x50
epc : ffffffff808811a2 ra : ffffffff80881406 sp : ffff8f80000c3cd0
status: 0000000200000121 badaddr: 0000000000000000 cause: 000000000000000d
[<ffffffff808811a2>] io_pages_free+0x2a/0x58
[<ffffffff80881406>] io_rings_free+0x3a/0x50
[<ffffffff80882176>] io_ring_exit_work+0x37e/0x424
[<ffffffff80027234>] process_one_work+0x10c/0x1f4
[<ffffffff8002756e>] worker_thread+0x252/0x31c
[<ffffffff8002f5e4>] kthread+0xc4/0xe0
[<ffffffff8000332a>] ret_from_fork+0xa/0x1c
Check for a NULL array in io_pages_free(), but also clear the page counts
when we free them to be on the safer side.
Reported-by: rtm@csail.mit.edu
Fixes: 03d89a2de2 ("io_uring: support for user allocated memory for rings/sqes")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This commit fixes the smatch static checker warning in function
mlxbf_tmfifo_rxtx_word() which complains data not initialized at
line 634 when IS_VRING_DROP() is TRUE.
Signed-off-by: Liming Sun <limings@nvidia.com>
Link: https://lore.kernel.org/r/20231012230235.219861-1-limings@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The data in the max brightness port for iMacs with MMIO gmux incorrectly
reports 0x03ff, but it should be 0xffff. As all other MMIO gmux models
have 0xffff, hard code this for all MMIO gmux's so they all have the
proper brightness range accessible.
Fixes: 0c18184de9 ("platform/x86: apple-gmux: support MMIO gmux on T2 Macs")
Reported-by: Karsten Leipold <poldi@dfn.de>
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20231017111444.19304-2-orlandoch.dev@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If platform_profile_register() fails, the driver does not propagate
the error, but instead probes successfully. This means when the driver
unbinds, the a warning might be issued by platform_profile_remove().
Fix this by propagating the error back to the caller of
surface_platform_profile_probe().
Compile-tested only.
Fixes: b78b4982d7 ("platform/surface: Add platform profile driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20231014235449.288702-1-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
nf_tables_abort_release() path calls nft_set_elem_destroy() for
NFT_MSG_NEWSETELEM which releases the element, however, a reference to
the element still remains in the working copy.
Fixes: ebd032fa88 ("netfilter: nf_tables: do not remove elements if set backend implements .abort")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
This allows to remove an expired element which is not possible in other
existing set backends, this is more noticeable if gc-interval is high so
expired elements remain in the tree. On-demand gc also does not help in
this case, because this is delete element path. Return NULL if element
has expired.
Fixes: 8d8540c4f5 ("netfilter: nft_set_rbtree: add timeout support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Don't mess with the host's firewall ruleset. Since audit logging is not
per-netns, add an initial delay of a second so other selftests' netns
cleanups have a chance to finish.
Fixes: e8dbde59ca ("selftests: netfilter: Test nf_tables audit logging")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
When resetting multiple objects at once (via dump request), emit a log
message per table (or filled skb) and resurrect the 'entries' parameter
to contain the number of objects being logged for.
To test the skb exhaustion path, perform some bulk counter and quota
adds in the kselftest.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com> (Audit)
Signed-off-by: Florian Westphal <fw@strlen.de>
acpi_agdi_init() in acpi_arm_init() will register a SDEI event, so
it needs the SDEI subsystem to be initialized (which is done in
acpi_ghes_init()) before the AGDI driver probing.
In commit fcea0ccf4f ("ACPI: bus: Consolidate all arm specific
initialisation into acpi_arm_init()"), the acpi_agdi_init() was
called before acpi_ghes_init() and it causes following failure:
| [ 0.515864] sdei: Failed to create event 1073741825: -5
| [ 0.515866] agdi agdi.0: Failed to register for SDEI event 1073741825
| [ 0.515867] agdi: probe of agdi.0 failed with error -5
| ...
| [ 0.516022] sdei: SDEIv1.0 (0x0) detected in firmware.
Fix it by moving acpi_arm_init() to the place of after
acpi_ghes_init().
Fixes: fcea0ccf4f ("ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()")
Reported-by: D Scott Phillips <scott@os.amperecomputing.com>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: D Scott Phillips <scott@os.amperecomputing.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_register_gsi() should return a negative value in case of failure.
Currently, it returns the return value from irq_create_fwspec_mapping().
However, irq_create_fwspec_mapping() returns 0 for failure. Fix the
issue by returning -EINVAL if irq_create_fwspec_mapping() returns zero.
Fixes: d44fa3d460 ("ACPI: Add support for ResourceSource/IRQ domain mapping")
Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
[ rjw: Rename a new local variable ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When CONFIG_IPV6=n, and building with W=1:
In file included from include/trace/define_trace.h:102,
from include/trace/events/neigh.h:255,
from net/core/net-traces.c:51:
include/trace/events/neigh.h: In function ‘trace_event_raw_event_neigh_create’:
include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable]
42 | struct in6_addr *pin6;
| ^~~~
include/trace/trace_events.h:402:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’
402 | { assign; } \
| ^~~~~~
include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’
44 | PARAMS(assign), \
| ^~~~~~
include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’
23 | TRACE_EVENT(neigh_create,
| ^~~~~~~~~~~
include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’
41 | TP_fast_assign(
| ^~~~~~~~~~~~~~
In file included from include/trace/define_trace.h:103,
from include/trace/events/neigh.h:255,
from net/core/net-traces.c:51:
include/trace/events/neigh.h: In function ‘perf_trace_neigh_create’:
include/trace/events/neigh.h:42:34: error: variable ‘pin6’ set but not used [-Werror=unused-but-set-variable]
42 | struct in6_addr *pin6;
| ^~~~
include/trace/perf.h:51:11: note: in definition of macro ‘DECLARE_EVENT_CLASS’
51 | { assign; } \
| ^~~~~~
include/trace/trace_events.h:44:30: note: in expansion of macro ‘PARAMS’
44 | PARAMS(assign), \
| ^~~~~~
include/trace/events/neigh.h:23:1: note: in expansion of macro ‘TRACE_EVENT’
23 | TRACE_EVENT(neigh_create,
| ^~~~~~~~~~~
include/trace/events/neigh.h:41:9: note: in expansion of macro ‘TP_fast_assign’
41 | TP_fast_assign(
| ^~~~~~~~~~~~~~
Indeed, the variable pin6 is declared and initialized unconditionally,
while it is only used and needlessly re-initialized when support for
IPv6 is enabled.
Fix this by dropping the unused variable initialization, and moving the
variable declaration inside the existing section protected by a check
for CONFIG_IPV6.
Fixes: fc651001d2 ("neighbor: Add tracepoint to __neigh_create")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Runtime power management support breaks Intel LTE modem where dmesg dump
showes timeout errors:
```
[ 72.027442] iosm 0000:01:00.0: msg timeout
[ 72.531638] iosm 0000:01:00.0: msg timeout
[ 73.035414] iosm 0000:01:00.0: msg timeout
[ 73.540359] iosm 0000:01:00.0: msg timeout
```
Furthermore, when shutting down with `poweroff` and modem attached, the
system rebooted instead of powering down as expected. The modem works
again only after power cycling.
Revert runtime power management support for IOSM driver as introduced by
commit e4f5073d53 ("net: wwan: iosm: enable runtime pm support for
7560").
Fixes: e4f5073d53 ("net: wwan: iosm: enable runtime pm support for 7560")
Reported-by: Martin <mwolf@adiumentum.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217996
Link: https://lore.kernel.org/r/267abf02-4b60-4a2e-92cd-709e3da6f7d3@gmail.com/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
yield_cpu is a sample of a preempted lock holder that gets propagated
back through the queue. Queued waiters use this to yield to the
preempted lock holder without continually sampling the lock word (which
would defeat the purpose of MCS queueing by bouncing the cache line).
The problem is that yield_cpu can become stale. It can take some time to
be passed down the chain, and if any queued waiter gets preempted then
it will cease to propagate the yield_cpu to later waiters.
This can result in yielding to a CPU that no longer holds the lock,
which is bad, but particularly if it is currently in H_CEDE (idle),
then it appears to be preempted and some hypervisors (PowerVM) can
cause very long H_CONFER latencies waiting for H_CEDE wakeup. This
results in latency spikes and hard lockups on oversubscribed
partitions with lock contention.
This is a minimal fix. Before yielding to yield_cpu, sample the lock
word to confirm yield_cpu is still the owner, and bail out of it is not.
Thanks to a bunch of people who reported this and tracked down the
exact problem using tracepoints and dispatch trace logs.
Fixes: 28db61e207 ("powerpc/qspinlock: allow propagation of yield CPU down the queue")
Cc: stable@vger.kernel.org # v6.2+
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reported-by: Laurent Dufour <ldufour@linux.ibm.com>
Reported-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Debugged-by: "Nysal Jan K.A" <nysal@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231016124305.139923-2-npiggin@gmail.com
Older Asus laptops change the backlight level themselves and then send
WMI events with different codes for different backlight levels.
The asus-wmi.c code maps the entire range of codes reported on
brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code:
define NOTIFY_BRNUP_MIN 0x11
define NOTIFY_BRNUP_MAX 0x1f
define NOTIFY_BRNDOWN_MIN 0x20
define NOTIFY_BRNDOWN_MAX 0x2e
if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
code = ASUS_WMI_BRN_UP;
else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
code = ASUS_WMI_BRN_DOWN;
This mapping is causing issues on new laptop models which actually
send 0x2b events for printscreen presses and 0x2c events for
capslock presses, which get translated into spurious brightness-down
presses.
This mapping is really only necessary when asus-wmi has registered
a backlight-device for backlight control. In this case the mapping
was used to decide to filter out the keypresss since in this case
the firmware has already modified the brightness itself and instead
of reporting a keypress asus-wmi will just report the new brightness
value to userspace.
OTOH when the firmware does not adjust the brightness itself then
it seems to always report 0x2e for brightness-down presses and
0x2f for brightness up presses independent of the actual brightness
level. So in this case the mapping of the code is not necessary
and this translation actually leads to spurious brightness-down
presses being send to userspace when pressing printscreen or capslock.
Modify asus_wmi_handle_event_code() to only do the mapping
when using asus-wmi backlight control to fix the spurious
brightness-down presses.
Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-3-hdegoede@redhat.com
Older Asus laptops change the backlight level themselves and then send
WMI events with different codes for different backlight levels.
The asus-wmi.c code maps the entire range of codes reported on
brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code:
define NOTIFY_BRNUP_MIN 0x11
define NOTIFY_BRNUP_MAX 0x1f
define NOTIFY_BRNDOWN_MIN 0x20
define NOTIFY_BRNDOWN_MAX 0x2e
if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
code = ASUS_WMI_BRN_UP;
else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
code = ASUS_WMI_BRN_DOWN;
Before this commit all the NOTIFY_BRNDOWN_MIN - NOTIFY_BRNDOWN_MAX
aka 0x20 - 0x2e events were mapped to 0x20.
This mapping is causing issues on new laptop models which actually
send 0x2b events for printscreen presses and 0x2c events for
capslock presses, which get translated into spurious brightness-down
presses.
The plan is disable the 0x11-0x2e special mapping on laptops
where asus-wmi does not register a backlight-device to avoid
the spurious brightness-down keypresses. New laptops always send
0x2e for brightness-down presses, change the special internal
ASUS_WMI_BRN_DOWN value from 0x20 to 0x2e to match this in
preparation for fixing the spurious brightness-down presses.
This change does not have any functional impact since all
of 0x20 - 0x2e is mapped to ASUS_WMI_BRN_DOWN first and only
then checked against the keymap code and the new 0x2e
value is still in the 0x20 - 0x2e range.
Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-2-hdegoede@redhat.com
Device flags are displayed incorrectly:
1) The comparison (i == F_FLOW_SEQ) is always false, because F_FLOW_SEQ
is equal to (1 << FLOW_SEQ_SHIFT) == 2048, and the maximum value
of the 'i' variable is (NR_PKT_FLAG - 1) == 17. It should be compared
with FLOW_SEQ_SHIFT.
2) Similarly to the F_IPSEC flag.
3) Also add spaces to the print end of the string literal "spi:%u"
to prevent the output from merging with the flag that follows.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 99c6d3d20d ("pktgen: Remove brute-force printing of flags")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
We found a glitch when configuring the pad as output high. To avoid this
glitch, move the data value setting before direction config in the
function vf610_gpio_direction_output().
Fixes: 659d8a6231 ("gpio: vf610: add imx7ulp support")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
[Bartosz: tweak the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add flag IRQCHIP_MASK_ON_SUSPEND to make sure gpio irq is masked on
suspend, if lack this flag, current irq arctitecture will not mask
the irq, and these unmasked gpio irq will wrongly wakeup the system
even they are not config as wakeup source.
Also add flag IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND to make sure the gpio
irq which is configed as wakeup source can work as expect.
Fixes: 7f2691a196 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The new sign/verify code broke the case of pkcs1pad without a
hash algorithm. Fix it by setting issig correctly for this case.
Fixes: 63ba4d6759 ("KEYS: asymmetric: Use new crypto interface without scatterlists")
Cc: stable@vger.kernel.org # v6.5
Reported-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
