Implement a minimal library version of AES-GCM based on the existing
library implementations of AES and multiplication in GF(2^128). Using
these primitives, GCM can be implemented in a straight-forward manner.
GCM has a couple of sharp edges, i.e., the amount of input data
processed with the same initialization vector (IV) should be capped to
protect the counter from 32-bit rollover (or carry), and the size of the
authentication tag should be fixed for a given key. [0]
The former concern is addressed trivially, given that the function call
API uses 32-bit signed types for the input lengths. It is still up to
the caller to avoid IV reuse in general, but this is not something we
can police at the implementation level.
As for the latter concern, let's make the authentication tag size part
of the key schedule, and only permit it to be configured as part of the
key expansion routine.
Note that table based AES implementations are susceptible to known
plaintext timing attacks on the encryption key. The AES library already
attempts to mitigate this to some extent, but given that the counter
mode encryption used by GCM operates exclusively on known plaintext by
construction (the IV and therefore the initial counter value are known
to an attacker), let's take some extra care to mitigate this, by calling
the AES library with interrupts disabled.
[0] https://nvlpubs.nist.gov/nistpubs/legacy/sp/nistspecialpublication800-38d.pdf
Link: https://lore.kernel.org/all/c6fb9b25-a4b6-2e4a-2dd1-63adda055a49@amd.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The gf128mul library has different variants with different
memory/performance tradeoffs, where the faster ones use 4k or 64k lookup
tables precomputed at runtime, which are based on one of the
multiplication factors, which is commonly the key for keyed hash
algorithms such as GHASH.
The slowest variant is gf128_mul_lle() [and its bbe/ble counterparts],
which does not use precomputed lookup tables, but it still relies on a
single u16[256] lookup table which is input independent. The use of such
a table may cause the execution time of gf128_mul_lle() to correlate
with the value of the inputs, which is generally something that must be
avoided for cryptographic algorithms. On top of that, the function uses
a sequence of if () statements that conditionally invoke be128_xor()
based on which bits are set in the second argument of the function,
which is usually a pointer to the multiplication factor that represents
the key.
In order to remove the correlation between the execution time of
gf128_mul_lle() and the value of its inputs, let's address the
identified shortcomings:
- add a time invariant version of gf128mul_x8_lle() that replaces the
table lookup with the expression that is used at compile time to
populate the lookup table;
- make the invocations of be128_xor() unconditional, but pass a zero
vector as the third argument if the associated bit in the key is
cleared.
The resulting code is likely to be significantly slower. However, given
that this is the slowest version already, making it even slower in order
to make it more secure is assumed to be justified.
The bbe and ble counterparts could receive the same treatment, but the
former is never used anywhere in the kernel, and the latter is only
used in the driver for a asynchronous crypto h/w accelerator (Chelsio),
where timing variances are unlikely to matter.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The gf128mul library does not depend on the crypto API at all, so it can
be moved into lib/crypto. This will allow us to use it in other library
code in a subsequent patch without having to depend on CONFIG_CRYPTO.
While at it, change the Kconfig symbol name to align with other crypto
library implementations. However, the source file name is retained, as
it is reflected in the module .ko filename, and changing this might
break things for users.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
No architecture actually defines this, so it's unneeded.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CRYPTO_LIB_CHACHA depends on CRYPTO for __crypto_xor, defined in
crypto/algapi.c. This is a layering violation because the dependencies
should only go in the other direction (crypto/ => lib/crypto/). Also
the correct dependency would be CRYPTO_ALGAPI, not CRYPTO. Fix this by
moving __crypto_xor into the utils module in lib/crypto/.
Note that CRYPTO_LIB_CHACHA_GENERIC selected XOR_BLOCKS, which is
unrelated and unnecessary. It was perhaps thought that XOR_BLOCKS was
needed for __crypto_xor, but that's not the case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As requested at
https://lore.kernel.org/r/YtEgzHuuMts0YBCz@gondor.apana.org.au, move
__crypto_memneq into lib/crypto/ and put it under a new tristate. The
tristate is CRYPTO_LIB_UTILS, and it builds a module libcryptoutils. As
more crypto library utilities are being added, this creates a single
place for them to go without cluttering up the main lib directory.
The module's main file will be lib/crypto/utils.c. However, leave
memneq.c as its own file because of its nonstandard license.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
libsha1 can be a module, so it needs a MODULE_LICENSE.
Fixes: ec8f7f4821 ("crypto: lib - make the sha1 library optional")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the Linux RNG no longer uses sha1_transform(), the SHA-1 library
is no longer needed unconditionally. Make it possible to build the
Linux kernel without the SHA-1 library by putting it behind a kconfig
option, and selecting this new option from the kconfig options that gate
the remaining users: CRYPTO_SHA1 for crypto/sha1_generic.c, BPF for
kernel/bpf/core.c, and IPV6 for net/ipv6/addrconf.c.
Unfortunately, since BPF is selected by NET, for now this can only make
a difference for kernels built without networking support.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SHA-1 is a crypto algorithm (or at least was intended to be -- it's not
considered secure anymore), so move it out of the top-level library
directory and into lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using 3 blocks here doesn't give us much more than using 2, and it
causes a stack frame size warning on certain compiler/config/arch
combinations:
lib/crypto/blake2s-selftest.c: In function 'blake2s_selftest':
>> lib/crypto/blake2s-selftest.c:632:1: warning: the frame size of 1088 bytes is larger than 1024 bytes [-Wframe-larger-than=]
632 | }
| ^
So this patch just reduces the block from 3 to 2, which makes the
warning go away.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-crypto/202206200851.gE3MHCgd-lkp@intel.com
Fixes: 2d16803c56 ("crypto: blake2s - remove shash module")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
BLAKE2s has no currently known use as an shash. Just remove all of this
unnecessary plumbing. Removing this shash was something we talked about
back when we were making BLAKE2s a built-in, but I simply never got
around to doing it. So this completes that project.
Importantly, this fixs a bug in which the lib code depends on
crypto_simd_disabled_for_test, causing linker errors.
Also add more alignment tests to the selftests and compare SIMD and
non-SIMD compression functions, to make up for what we lose from
testmgr.c.
Reported-by: gaochao <gaochao49@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 6048fdcc5f ("lib/crypto: blake2s: include as built-in")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is used by code that doesn't need CONFIG_CRYPTO, so move this into
lib/ with a Kconfig option so that it can be selected by whatever needs
it.
This fixes a linker error Zheng pointed out when
CRYPTO_MANAGER_DISABLE_TESTS!=y and CRYPTO=m:
lib/crypto/curve25519-selftest.o: In function `curve25519_selftest':
curve25519-selftest.c:(.init.text+0x60): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0xec): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0x114): undefined reference to `__crypto_memneq'
curve25519-selftest.c:(.init.text+0x154): undefined reference to `__crypto_memneq'
Reported-by: Zheng Bin <zhengbin13@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Fixes: aa127963f1 ("crypto: lib/curve25519 - re-add selftests")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit 8bdc2a1901.
It got merged a bit prematurely and shortly after the kernel test robot
and Sudip pointed out build failures:
arm: imx_v6_v7_defconfig and multi_v7_defconfig
mips: decstation_64_defconfig, decstation_defconfig, decstation_r4k_defconfig
In file included from crypto/chacha20poly1305.c:13:
include/crypto/poly1305.h:56:46: error: 'CONFIG_CRYPTO_LIB_POLY1305_RSIZE' undeclared here (not in a function); did you mean 'CONFIG_CRYPTO_POLY1305_MODULE'?
56 | struct poly1305_key opaque_r[CONFIG_CRYPTO_LIB_POLY1305_RSIZE];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We could attempt to fix this by listing the dependencies piecemeal, but
it's not as obvious as it looks: drivers like caam use this macro in
headers even if there's no .o compiled in that makes use of it. So
actually fixing this might require a bit more of a comprehensive
approach, rather than whack-a-mole with hunting down which drivers use
which headers which use this macro.
Therefore, this commit just reverts the change, and maybe the problem
can be visited on the next rainy day.
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 8bdc2a1901 ("crypto: poly1305 - cleanup stray CRYPTO_LIB_POLY1305_RSIZE")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
API:
- Test in-place en/decryption with two sglists in testmgr.
- Fix process vs. softirq race in cryptd.
Algorithms:
- Add arm64 acceleration for sm4.
- Add s390 acceleration for chacha20.
Drivers:
- Add polarfire soc hwrng support in mpsf.
- Add support for TI SoC AM62x in sa2ul.
- Add support for ATSHA204 cryptochip in atmel-sha204a.
- Add support for PRNG in caam.
- Restore support for storage encryption in qat.
- Restore support for storage encryption in hisilicon/sec.
-----BEGIN PGP SIGNATURE-----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=oVRe
-----END PGP SIGNATURE-----
Merge tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Test in-place en/decryption with two sglists in testmgr
- Fix process vs softirq race in cryptd
Algorithms:
- Add arm64 acceleration for sm4
- Add s390 acceleration for chacha20
Drivers:
- Add polarfire soc hwrng support in mpsf
- Add support for TI SoC AM62x in sa2ul
- Add support for ATSHA204 cryptochip in atmel-sha204a
- Add support for PRNG in caam
- Restore support for storage encryption in qat
- Restore support for storage encryption in hisilicon/sec"
* tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume()
crypto: hisilicon/sec - delete the flag CRYPTO_ALG_ALLOCATES_MEMORY
crypto: qat - add support for 401xx devices
crypto: qat - re-enable registration of algorithms
crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag
crypto: qat - add param check for DH
crypto: qat - add param check for RSA
crypto: qat - remove dma_free_coherent() for DH
crypto: qat - remove dma_free_coherent() for RSA
crypto: qat - fix memory leak in RSA
crypto: qat - add backlog mechanism
crypto: qat - refactor submission logic
crypto: qat - use pre-allocated buffers in datapath
crypto: qat - set to zero DH parameters before free
crypto: s390 - add crypto library interface for ChaCha20
crypto: talitos - Uniform coding style with defined variable
crypto: octeontx2 - simplify the return expression of otx2_cpt_aead_cbc_aes_sha_setkey()
crypto: cryptd - Protect per-CPU resource by disabling BH.
crypto: sun8i-ce - do not fallback if cryptlen is less than sg length
crypto: sun8i-ce - rework debugging
...
When CRYPTO_LIB_POLY1305 is unset, CRYPTO_LIB_POLY1305_RSIZE
is still set in the Kconfig, cluttering things.
Fix this by making CRYPTO_LIB_POLY1305_RSIZE depend on
CRYPTO_LIB_POLY1305.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The lib/crypto libraries live in lib because they are used by various
drivers of the kernel. In contrast, the various helper functions in
crypto are there because they're used exclusively by the crypto API. The
SM3 and SM4 helper functions were erroniously moved into lib/crypto/
instead of crypto/, even though there are no in-kernel users outside of
the crypto API of those functions. This commit moves them into crypto/.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
blake2s_compress_generic is weakly aliased by blake2s_compress. The
current harness for function selection uses a function pointer, which is
ordinarily inlined and resolved at compile time. But when Clang's CFI is
enabled, CFI still triggers when making an indirect call via a weak
symbol. This seems like a bug in Clang's CFI, as though it's bucketing
weak symbols and strong symbols differently. It also only seems to
trigger when "full LTO" mode is used, rather than "thin LTO".
[ 0.000000][ T0] Kernel panic - not syncing: CFI failure (target: blake2s_compress_generic+0x0/0x1444)
[ 0.000000][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-mainline-06981-g076c855b846e #1
[ 0.000000][ T0] Hardware name: MT6873 (DT)
[ 0.000000][ T0] Call trace:
[ 0.000000][ T0] dump_backtrace+0xfc/0x1dc
[ 0.000000][ T0] dump_stack_lvl+0xa8/0x11c
[ 0.000000][ T0] panic+0x194/0x464
[ 0.000000][ T0] __cfi_check_fail+0x54/0x58
[ 0.000000][ T0] __cfi_slowpath_diag+0x354/0x4b0
[ 0.000000][ T0] blake2s_update+0x14c/0x178
[ 0.000000][ T0] _extract_entropy+0xf4/0x29c
[ 0.000000][ T0] crng_initialize_primary+0x24/0x94
[ 0.000000][ T0] rand_initialize+0x2c/0x6c
[ 0.000000][ T0] start_kernel+0x2f8/0x65c
[ 0.000000][ T0] __primary_switched+0xc4/0x7be4
[ 0.000000][ T0] Rebooting in 5 seconds..
Nonetheless, the function pointer method isn't so terrific anyway, so
this patch replaces it with a simple boolean, which also gets inlined
away. This successfully works around the Clang bug.
In general, I'm not too keen on all of the indirection involved here; it
clearly does more harm than good. Hopefully the whole thing can get
cleaned up down the road when lib/crypto is overhauled more
comprehensively. But for now, we go with a simple bandaid.
Fixes: 6048fdcc5f ("lib/crypto: blake2s: include as built-in")
Link: https://github.com/ClangBuiltLinux/linux/issues/1567
Reported-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Miles Chen <miles.chen@mediatek.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Stand-alone implementation of the SM3 algorithm. It is designed
to have as little dependencies as possible. In other cases you
should generally use the hash APIs from include/crypto/hash.h.
Especially when hashing large amounts of data as those APIs may
be hw-accelerated. In the new SM3 stand-alone library,
sm3_transform() has also been optimized, instead of simply using
the code in sm3_generic.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Basically nobody should use blake2s in an HMAC construction; it already
has a keyed variant. But unfortunately for historical reasons, Noise,
used by WireGuard, uses HKDF quite strictly, which means we have to use
this. Because this really shouldn't be used by others, this commit moves
it into wireguard's noise.c locally, so that kernels that aren't using
WireGuard don't get this superfluous code baked in. On m68k systems,
this shaves off ~314 bytes.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Commit 6048fdcc5f ("lib/crypto: blake2s: include as built-in") took
away a number of prompt texts from other crypto libraries. This makes
values flip from built-in to module when oldconfig runs, and causes
problems when these crypto libs need to be built in for thingslike
BIG_KEYS.
Fixes: 6048fdcc5f ("lib/crypto: blake2s: include as built-in")
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
[Jason: - moved menu into submenu of lib/ instead of root menu
- fixed chacha sub-dependencies for CONFIG_CRYPTO]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
In preparation for using blake2s in the RNG, we change the way that it
is wired-in to the build system. Instead of using ifdefs to select the
right symbol, we use weak symbols. And because ARM doesn't need the
generic implementation, we make the generic one default only if an arch
library doesn't need it already, and then have arch libraries that do
need it opt-in. So that the arch libraries can remain tristate rather
than bool, we then split the shash part from the glue code.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When building with clang and GNU as, there is a warning about ignored
changed section attributes:
/tmp/sm4-c916c8.s: Assembler messages:
/tmp/sm4-c916c8.s:677: Warning: ignoring changed section attributes for
.data..cacheline_aligned
"static const" places the data in .rodata but __cacheline_aligned has
the section attribute to place it in .data..cacheline_aligned, in
addition to the aligned attribute.
To keep the alignment but avoid attempting to change sections, use the
____cacheline_aligned attribute, which is just the aligned attribute.
Fixes: 2b31277af5 ("crypto: sm4 - create SM4 library based on sm4 generic code")
Link: https://github.com/ClangBuiltLinux/linux/issues/1441
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SM4 library is abstracted from sm4-generic algorithm, sm4-ce can depend on
the SM4 library instead of sm4-generic, and some functions in sm4-generic
do not need to be exported.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Take the existing small footprint and mostly time invariant C code
and turn it into a SM4 library that can be used for non-performance
critical, casual use of SM4, and as a fallback for, e.g., SIMD code
that needs a secondary path that can be taken in contexts where the
SIMD unit is off limits.
Secondly, some codes have been optimized, such as unrolling small
times loop, removing unnecessary memory shifts, exporting sbox, fk,
ck arrays, and basic encryption and decryption functions.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rename module_init & module_exit functions that are named
"mod_init" and "mod_exit" so that they are unique in both the
System.map file and in initcall_debug output instead of showing
up as almost anonymous "mod_init".
This is helpful for debugging and in determining how long certain
module_init calls take to execute.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix function name in chacha.c kernel-doc comment to remove a warning.
Convert af_alg.c to kernel-doc notation to eliminate many kernel-doc
warnings.
../lib/crypto/chacha.c:77: warning: expecting prototype for chacha_block(). Prototype was for chacha_block_generic() instead
chacha.c:104: warning: Excess function parameter 'out' description in 'hchacha_block_generic'
af_alg.c:498: warning: Function parameter or member 'sk' not described in 'af_alg_alloc_tsgl'
../crypto/af_alg.c:539: warning: expecting prototype for aead_count_tsgl(). Prototype was for af_alg_count_tsgl() instead
../crypto/af_alg.c:596: warning: expecting prototype for aead_pull_tsgl(). Prototype was for af_alg_pull_tsgl() instead
af_alg.c:663: warning: Function parameter or member 'areq' not described in 'af_alg_free_areq_sgls'
af_alg.c:700: warning: Function parameter or member 'sk' not described in 'af_alg_wait_for_wmem'
af_alg.c:700: warning: Function parameter or member 'flags' not described in 'af_alg_wait_for_wmem'
af_alg.c:731: warning: Function parameter or member 'sk' not described in 'af_alg_wmem_wakeup'
af_alg.c:757: warning: Function parameter or member 'sk' not described in 'af_alg_wait_for_data'
af_alg.c:757: warning: Function parameter or member 'flags' not described in 'af_alg_wait_for_data'
af_alg.c:757: warning: Function parameter or member 'min' not described in 'af_alg_wait_for_data'
af_alg.c:796: warning: Function parameter or member 'sk' not described in 'af_alg_data_wakeup'
af_alg.c:832: warning: Function parameter or member 'sock' not described in 'af_alg_sendmsg'
af_alg.c:832: warning: Function parameter or member 'msg' not described in 'af_alg_sendmsg'
af_alg.c:832: warning: Function parameter or member 'size' not described in 'af_alg_sendmsg'
af_alg.c:832: warning: Function parameter or member 'ivsize' not described in 'af_alg_sendmsg'
af_alg.c:985: warning: Function parameter or member 'sock' not described in 'af_alg_sendpage'
af_alg.c:985: warning: Function parameter or member 'page' not described in 'af_alg_sendpage'
af_alg.c:985: warning: Function parameter or member 'offset' not described in 'af_alg_sendpage'
af_alg.c:985: warning: Function parameter or member 'size' not described in 'af_alg_sendpage'
af_alg.c:985: warning: Function parameter or member 'flags' not described in 'af_alg_sendpage'
af_alg.c:1040: warning: Function parameter or member 'areq' not described in 'af_alg_free_resources'
af_alg.c:1059: warning: Function parameter or member '_req' not described in 'af_alg_async_cb'
af_alg.c:1059: warning: Function parameter or member 'err' not described in 'af_alg_async_cb'
af_alg.c:1083: warning: Function parameter or member 'file' not described in 'af_alg_poll'
af_alg.c:1083: warning: Function parameter or member 'sock' not described in 'af_alg_poll'
af_alg.c:1083: warning: Function parameter or member 'wait' not described in 'af_alg_poll'
af_alg.c:1114: warning: Function parameter or member 'sk' not described in 'af_alg_alloc_areq'
af_alg.c:1114: warning: Function parameter or member 'areqlen' not described in 'af_alg_alloc_areq'
af_alg.c:1146: warning: Function parameter or member 'sk' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'msg' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'flags' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'areq' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'maxsize' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'outlen' not described in 'af_alg_get_rsgl'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
gcc-11 points out a mismatch between the declaration and the definition
of poly1305_core_setkey():
lib/crypto/poly1305-donna32.c:13:67: error: argument 2 of type ‘const u8[16]’ {aka ‘const unsigned char[16]’} with mismatched bound [-Werror=array-parameter=]
13 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
| ~~~~~~~~~^~~~~~~~~~~
In file included from lib/crypto/poly1305-donna32.c:11:
include/crypto/internal/poly1305.h:21:68: note: previously declared as ‘const u8 *’ {aka ‘const unsigned char *’}
21 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key);
This is harmless in principle, as the calling conventions are the same,
but the more specific prototype allows better type checking in the
caller.
Change the declaration to match the actual function definition.
The poly1305_simd_init() is a bit suspicious here, as it previously
had a 32-byte argument type, but looks like it needs to take the
16-byte POLY1305_BLOCK_SIZE array instead.
Fixes: 1c08a10436 ("crypto: poly1305 - add new 32 and 64-bit generic versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With no mod_exit function, users are unable to unload the module after
use. I'm not aware of any reason why module unloading should be
prohibited for this one, so this commit simply adds an empty exit
function.
Reported-and-tested-by: John Donnelly <john.p.donnelly@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move most of blake2s_update() and blake2s_final() into new inline
functions __blake2s_update() and __blake2s_final() in
include/crypto/internal/blake2s.h so that this logic can be shared by
the shash helper functions. This will avoid duplicating this logic
between the library and shash implementations.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a missing prototype warning on blake2s_selftest.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch moves the curve25519_selftest into curve25519.h so
we don't get a warning from gcc complaining about a missing
prototype.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unrolling the LOAD and BLEND loops improves performance by ~8% on x86_64
(tested on Broadwell Xeon) while not increasing code size too much.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reduces code size substantially (on x86_64 with gcc-10 the size of
sha256_update() goes from 7593 bytes to 1952 bytes including the new
SHA256_K array), and on x86 is slightly faster than the full unroll
(tested on Broadwell Xeon).
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The temporary W[] array is currently zeroed out once every call to
sha256_transform(), i.e. once every 64 bytes of input data. Moving it to
sha256_update() instead so that it is cleared only once per update can
save about 2-3% of the total time taken to compute the digest, with a
reasonable memset() implementation, and considerably more (~20%) with a
bad one (eg the x86 purgatory currently uses a memset() coded in C).
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The assignments to clear a through h and t1/t2 are optimized out by the
compiler because they are unused after the assignments.
Clearing individual scalar variables is unlikely to be useful, as they
may have been assigned to registers, and even if stack spilling was
required, there may be compiler-generated temporaries that are
impossible to clear in any case.
So drop the clearing of a through h and t1/t2.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Without the barrier_data() inside memzero_explicit(), the compiler may
optimize away the state-clearing if it can tell that the state is not
used afterwards. At least in lib/crypto/sha256.c:__sha256_final(), the
function can get inlined into sha256(), in which case the memset is
optimized away.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no reason for the chacha20poly1305 SG miter code to use
kmap instead of kmap_atomic as the critical section doesn't sleep
anyway. So we can simply get rid of the preemptible check and
set SG_MITER_ATOMIC unconditionally.
Even if we need to reenable preemption to lower latency we should
be doing that by interrupting the SG miter walk rather than using
kmap.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a function sha256() which computes a SHA-256 digest in one step,
combining sha256_init() + sha256_update() + sha256_final().
This is similar to how we also have blake2s().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
<linux/cryptohash.h> sounds very generic and important, like it's the
header to include if you're doing cryptographic hashing in the kernel.
But actually it only includes the library implementation of the SHA-1
compression function (not even the full SHA-1). This should basically
never be used anymore; SHA-1 is no longer considered secure, and there
are much better ways to do cryptographic hashing in the kernel.
Most files that include this header don't actually need it. So in
preparation for removing it, remove all these unneeded includes of it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SHA-256 / SHA-224 library functions can't fail, so remove the
useless return value.
Also long as the declarations are being changed anyway, also fix some
parameter names in the declarations to match the definitions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Prior, passing in chunks of 2, 3, or 4, followed by any additional
chunks would result in the chacha state counter getting out of sync,
resulting in incorrect encryption/decryption, which is a pretty nasty
crypto vuln: "why do images look weird on webpages?" WireGuard users
never experienced this prior, because we have always, out of tree, used
a different crypto library, until the recent Frankenzinc addition. This
commit fixes the issue by advancing the pointers and state counter by
the actual size processed. It also fixes up a bug in the (optional,
costly) stride test that prevented it from running on arm64.
Fixes: b3aad5bad2 ("crypto: arm64/chacha - expose arm64 ChaCha routine as library function")
Reported-and-tested-by: Emil Renner Berthing <kernel@esmil.dk>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This code assigns src_len (size_t) to sl (int), which causes problems
when src_len is very large. Probably nobody in the kernel should be
passing this much data to chacha20poly1305 all in one go anyway, so I
don't think we need to change the algorithm or introduce larger types
or anything. But we should at least error out early in this case and
print a warning so that we get reports if this does happen and can look
into why anybody is possibly passing it that much data or if they're
accidently passing -1 or similar.
Fixes: d95312a3cc ("crypto: lib/chacha20poly1305 - reimplement crypt_from_sg() routine")
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When this was originally ported, the 12-byte nonce vectors were left out
to keep things simple. I agree that we don't need nor want a library
interface for 12-byte nonces. But these test vectors were specially
crafted to look at issues in the underlying primitives and related
interactions. Therefore, we actually want to keep around all of the
test vectors, and simply have a helper function to test them with.
Secondly, the sglist-based chunking code in the library interface is
rather complicated, so this adds a developer-only test for ensuring that
all the book keeping is correct, across a wide array of possibilities.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If CRYPTO_CURVE25519 is y, CRYPTO_LIB_CURVE25519_GENERIC will be
y, but CRYPTO_LIB_CURVE25519 may be set to m, this causes build
errors:
lib/crypto/curve25519-selftest.o: In function `curve25519':
curve25519-selftest.c:(.text.unlikely+0xc): undefined reference to `curve25519_arch'
lib/crypto/curve25519-selftest.o: In function `curve25519_selftest':
curve25519-selftest.c:(.init.text+0x17e): undefined reference to `curve25519_base_arch'
This is because the curve25519 self-test code is being controlled
by the GENERIC option rather than the overall CURVE25519 option,
as is the case with blake2s. To recap, the GENERIC and ARCH options
for CURVE25519 are internal only and selected by users such as
the Crypto API, or the externally visible CURVE25519 option which
in turn is selected by wireguard. The self-test is specific to the
the external CURVE25519 option and should not be enabled by the
Crypto API.
This patch fixes this by splitting the GENERIC module from the
CURVE25519 module with the latter now containing just the self-test.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: aa127963f1 ("crypto: lib/curve25519 - re-add selftests")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These two C implementations from Zinc -- a 32x32 one and a 64x64 one,
depending on the platform -- come from Andrew Moon's public domain
poly1305-donna portable code, modified for usage in the kernel. The
precomputation in the 32-bit version and the use of 64x64 multiplies in
the 64-bit version make these perform better than the code it replaces.
Moon's code is also very widespread and has received many eyeballs of
scrutiny.
There's a bit of interference between the x86 implementation, which
relies on internal details of the old scalar implementation. In the next
commit, the x86 implementation will be replaced with a faster one that
doesn't rely on this, so none of this matters much. But for now, to keep
this passing the tests, we inline the bits of the old implementation
that the x86 implementation relied on. Also, since we now support a
slightly larger key space, via the union, some offsets had to be fixed
up.
Nonce calculation was folded in with the emit function, to take
advantage of 64x64 arithmetic. However, Adiantum appeared to rely on no
nonce handling in emit, so this path was conditionalized. We also
introduced a new struct, poly1305_core_key, to represent the precise
amount of space that particular implementation uses.
Testing with kbench9000, depending on the CPU, the update function for
the 32x32 version has been improved by 4%-7%, and for the 64x64 by
19%-30%. The 32x32 gains are small, but I think there's great value in
having a parallel implementation to the 64x64 one so that the two can be
compared side-by-side as nice stand-alone units.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Somehow these were dropped when Zinc was being integrated, which is
problematic, because testing the library interface for Curve25519 is
important.. This commit simply adds them back and wires them in in the
same way that the blake2s selftests are wired in.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
