ib_send_cm_sidr_rep() {
spin_lock_irqsave()
cm_send_sidr_rep_locked() {
...
spin_lock_irq()
....
spin_unlock_irq() <--- this will enable interrupts
}
spin_unlock_irqrestore()
}
spin_unlock_irqrestore() expects interrupts to be disabled but the
internal spin_unlock_irq() will always enable hard interrupts.
Fix this by replacing the internal spin_{lock,unlock}_irq() with
irqsave/restore variants.
It fixes the following kernel trace:
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 2 PID: 20001 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x1d/0x20
Call Trace:
_raw_spin_unlock_irqrestore+0x4e/0x50
ib_send_cm_sidr_rep+0x3a/0x50 [ib_cm]
cma_send_sidr_rep+0xa1/0x160 [rdma_cm]
rdma_accept+0x25e/0x350 [rdma_cm]
ucma_accept+0x132/0x1cc [rdma_ucm]
ucma_write+0xbf/0x140 [rdma_ucm]
vfs_write+0xc1/0x340
ksys_write+0xb3/0xe0
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 87c4c774cb ("RDMA/cm: Protect access to remote_sidr_table")
Link: https://lore.kernel.org/r/20210301081844.445823-1-leon@kernel.org
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmAppPgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGeXYH/imZPBd4A1jIMehN
5HV2A53Z+MXmmaMuGj9X1KV6vsf55/xB+IhOoFdtRAIsO8c2yYSCO8i4+4R0XfYA
+/YFJeq672rojQnmh6XbpR8dugaAV7CUHy6n7KDsyvtT6EOCpwFSwkOb4X3tBRX6
TlYgm2d/xgV/wRHSgLVugK0MdFCLMAnyb7mkPfar9QrMgG1BiDKLq07xmwnS23On
TkqpJ9yZ/rJpUrrUqQYPShSO/FmA+fSfWs0CDv7EIrJ40LUScD6PZxSHWTIHtjLk
E4jFda6wuqLRVWsBwaBzUIdD0zk7X5quHRzEpbC5ga16SK6yrWvE5YJJXCguIEuZ
f3FMRYs=
=CAjn
-----END PGP SIGNATURE-----
Merge tag 'v5.11' into rdma.git for-next
Linux 5.11
Merged to resolve conflicts with RDMA rc commits
- drivers/infiniband/sw/rxe/rxe_net.c
The final logic is to call rxe_get_dev_from_net() again with the master
netdev if the packet was rx'd on a vlan. To keep the elimination of the
local variables requires a trivial edit to the code in -rc
Link: https://lore.kernel.org/r/20210210131542.215ea67c@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
smatch gives the warning:
drivers/infiniband/ulp/rtrs/rtrs-srv.c:1805 rtrs_rdma_connect() warn: passing zero to 'PTR_ERR'
Which is trying to say smatch has shown that srv is not an error pointer
and thus cannot be passed to PTR_ERR.
The solution is to move the list_add() down after full initilization of
rtrs_srv. To avoid holding the srv_mutex too long, only hold it during the
list operation as suggested by Leon.
Fixes: 03e9b33a0f ("RDMA/rtrs: Only allow addition of path to an already established session")
Link: https://lore.kernel.org/r/20210216143807.65923-1-jinpu.wang@cloud.ionos.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The current code computes a number of channels per SRP target and spreads
them equally across all online NUMA nodes. Each channel is then assigned
a CPU within this node.
In the case of unbalanced, or even unpopulated nodes, some channels do not
get a CPU associated and thus do not get connected. This causes the SRP
connection to fail.
This patch solves the issue by rewriting channel computation and
allocation:
- Drop channel to node/CPU association as it had no real effect on
locality but added unnecessary complexity.
- Tweak the number of channels allocated to reduce CPU contention when
possible:
- Up to one channel per CPU (instead of up to 4 by node)
- At least 4 channels per node, unless ch_count module parameter is
used.
Link: https://lore.kernel.org/r/9cb4d9d3-30ad-2276-7eff-e85f7ddfb411@suse.com
Signed-off-by: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky says:
====================
Add an extra timestamp format for mlx5_ib device.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* branch 'mlx5_timestamp':
RDMA/mlx5: Fail QP creation if the device can not support the CQE TS
net/mlx5: Add new timestamp mode bits
In ConnectX6Dx device, HW can work in real time timestamp mode according
to the device capabilities per RQ/SQ/QP.
When the flag IB_UVERBS_CQ_FLAGS_TIMESTAMP_COMPLETION is set, the user
expect to get TS on the CQEs in free running format, so we need to fail
the QP creation if the current mode of the device doesn't support it.
Link: https://lore.kernel.org/r/20210209131107.698833-3-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The traditional DevX CQ creation flow goes through mlx5_core_create_cq()
which checks that the given EQN corresponds to an existing EQ and attaches
a devx handler to the EQN for the CQ.
In some cases the EQ will not be a kernel EQ, but will be controlled by
modify CQ, don't block creating these just because the EQN can't be found
in the kernel.
Link: https://lore.kernel.org/r/20210211085549.1277674-1-leon@kernel.org
Signed-off-by: Tal Gilboa <talgi@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
put_device() decreases the ref-count and then the device will be
cleaned-up, while at is also add missing put_device in
rtrs_srv_create_once_sysfs_root_folders
This patch solves a kmemleak error as below:
unreferenced object 0xffff88809a7a0710 (size 8):
comm "kworker/4:1H", pid 113, jiffies 4295833049 (age 6212.380s)
hex dump (first 8 bytes):
62 6c 61 00 6b 6b 6b a5 bla.kkk.
backtrace:
[<0000000054413611>] kstrdup+0x2e/0x60
[<0000000078e3120a>] kobject_set_name_vargs+0x2f/0xb0
[<00000000f1a17a6b>] dev_set_name+0xab/0xe0
[<00000000d5502e32>] rtrs_srv_create_sess_files+0x2fb/0x314 [rtrs_server]
[<00000000ed11a1ef>] rtrs_srv_info_req_done+0x631/0x800 [rtrs_server]
[<000000008fc5aa8f>] __ib_process_cq+0x94/0x100 [ib_core]
[<00000000a9599cb4>] ib_cq_poll_work+0x32/0xc0 [ib_core]
[<00000000cfc376be>] process_one_work+0x4bc/0x980
[<0000000016e5c96a>] worker_thread+0x78/0x5c0
[<00000000c20b8be0>] kthread+0x191/0x1e0
[<000000006c9c0003>] ret_from_fork+0x3a/0x50
Fixes: baa5b28b7a ("RDMA/rtrs-srv: Replace device_register with device_initialize and device_add")
Link: https://lore.kernel.org/r/20210212134525.103456-5-jinpu.wang@cloud.ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
kmemleak reported an error as below:
unreferenced object 0xffff8880674b7640 (size 64):
comm "kworker/4:1H", pid 113, jiffies 4296403507 (age 507.840s)
hex dump (first 32 bytes):
69 70 3a 31 39 32 2e 31 36 38 2e 31 32 32 2e 31 ip:192.168.122.1
31 30 40 69 70 3a 31 39 32 2e 31 36 38 2e 31 32 10@ip:192.168.12
backtrace:
[<0000000054413611>] kstrdup+0x2e/0x60
[<0000000078e3120a>] kobject_set_name_vargs+0x2f/0xb0
[<00000000ca2be3ee>] kobject_init_and_add+0xb0/0x120
[<0000000062ba5e78>] rtrs_srv_create_sess_files+0x14c/0x314 [rtrs_server]
[<00000000b45b7217>] rtrs_srv_info_req_done+0x5b1/0x800 [rtrs_server]
[<000000008fc5aa8f>] __ib_process_cq+0x94/0x100 [ib_core]
[<00000000a9599cb4>] ib_cq_poll_work+0x32/0xc0 [ib_core]
[<00000000cfc376be>] process_one_work+0x4bc/0x980
[<0000000016e5c96a>] worker_thread+0x78/0x5c0
[<00000000c20b8be0>] kthread+0x191/0x1e0
[<000000006c9c0003>] ret_from_fork+0x3a/0x50
It is caused by the not-freed kobject of rtrs_srv_sess. The kobject
embedded in rtrs_srv_sess has ref-counter 2 after calling
process_info_req(). Therefore it must call kobject_put twice. Currently
it calls kobject_put only once at rtrs_srv_destroy_sess_files because
kobject_del removes the state_in_sysfs flag and then kobject_put in
free_sess() is not called.
This patch moves kobject_del() into free_sess() so that the kobject of
rtrs_srv_sess can be freed. And also this patch adds the missing call of
sysfs_remove_group() to clean-up the sysfs directory.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210212134525.103456-4-jinpu.wang@cloud.ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
While adding a path from the client side to an already established
session, it was possible to provide the destination IP to a different
server. This is dangerous.
This commit adds an extra member to the rtrs_msg_conn_req structure, named
first_conn; which is supposed to notify if the connection request is the
first for that session or not.
On the server side, if a session does not exist but the first_conn
received inside the rtrs_msg_conn_req structure is 1, the connection
request is failed. This signifies that the connection request is for an
already existing session, and since the server did not find one, it is an
wrong connection request.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210212134525.103456-3-jinpu.wang@cloud.ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Reviewed-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
BUG: KASAN: stack-out-of-bounds in _mlx4_ib_post_send+0x1bd2/0x2770 [mlx4_ib]
Read of size 4 at addr ffff8880d5a7f980 by task kworker/0:1H/565
CPU: 0 PID: 565 Comm: kworker/0:1H Tainted: G O 5.4.84-storage #5.4.84-1+feature+linux+5.4.y+dbg+20201216.1319+b6b887b~deb10
Hardware name: Supermicro H8QG6/H8QG6, BIOS 3.00 09/04/2012
Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
Call Trace:
dump_stack+0x96/0xe0
print_address_description.constprop.4+0x1f/0x300
? irq_work_claim+0x2e/0x50
__kasan_report.cold.8+0x78/0x92
? _mlx4_ib_post_send+0x1bd2/0x2770 [mlx4_ib]
kasan_report+0x10/0x20
_mlx4_ib_post_send+0x1bd2/0x2770 [mlx4_ib]
? check_chain_key+0x1d7/0x2e0
? _mlx4_ib_post_recv+0x630/0x630 [mlx4_ib]
? lockdep_hardirqs_on+0x1a8/0x290
? stack_depot_save+0x218/0x56e
? do_profile_hits.isra.6.cold.13+0x1d/0x1d
? check_chain_key+0x1d7/0x2e0
? save_stack+0x4d/0x80
? save_stack+0x19/0x80
? __kasan_slab_free+0x125/0x170
? kfree+0xe7/0x3b0
rdma_write_sg+0x5b0/0x950 [rtrs_server]
The problem is when we send imm_wr, the type should be ib_rdma_wr, so hw
driver like mlx4 can do rdma_wr(wr), so fix it by use the ib_rdma_wr as
type for imm_wr.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210212134525.103456-2-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The pkt->offset field is never used except to assign it to 0. But it adds
lots of unneeded code. This patch removes the field and related code. This
causes a measurable improvement in performance.
Link: https://lore.kernel.org/r/20210211210455.3274-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ucma_process_join() allocates struct ucma_multicast mc and frees it if an
error occurs during its run. Specifically, if an error occurs in
copy_to_user(), a use-after-free might happen in the following scenario:
1. mc struct is allocated.
2. rdma_join_multicast() is called and succeeds. During its run,
cma_iboe_join_multicast() enqueues a work that will later use the
aforementioned mc struct.
3. copy_to_user() is called and fails.
4. mc struct is deallocated.
5. The work that was enqueued by cma_iboe_join_multicast() is run and
calls ucma_create_uevent() which tries to access mc struct (which is
freed by now).
Fix this bug by cancelling the work enqueued by cma_iboe_join_multicast().
Since cma_work_handler() frees struct cma_work, we don't use it in
cma_iboe_join_multicast() so we can safely cancel the work later.
The following syzkaller report revealed it:
BUG: KASAN: use-after-free in ucma_create_uevent+0x2dd/0x;3f0 drivers/infiniband/core/ucma.c:272
Read of size 8 at addr ffff88810b3ad110 by task kworker/u8:1/108
CPU: 1 PID: 108 Comm: kworker/u8:1 Not tainted 5.10.0-rc6+ #257
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: rdma_cm cma_work_handler
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xbe/0xf9 lib/dump_stack.c:118
print_address_description.constprop.0+0x3e/0×60 mm/kasan/report.c:385
__kasan_report mm/kasan/report.c:545 [inline]
kasan_report.cold+0x1f/0×37 mm/kasan/report.c:562
ucma_create_uevent+0x2dd/0×3f0 drivers/infiniband/core/ucma.c:272
ucma_event_handler+0xb7/0×3c0 drivers/infiniband/core/ucma.c:349
cma_cm_event_handler+0x5d/0×1c0 drivers/infiniband/core/cma.c:1977
cma_work_handler+0xfa/0×190 drivers/infiniband/core/cma.c:2718
process_one_work+0x54c/0×930 kernel/workqueue.c:2272
worker_thread+0x82/0×830 kernel/workqueue.c:2418
kthread+0x1ca/0×220 kernel/kthread.c:292
ret_from_fork+0x1f/0×30 arch/x86/entry/entry_64.S:296
Allocated by task 359:
kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc mm/kasan/common.c:461 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:434
kmalloc include/linux/slab.h:552 [inline]
kzalloc include/linux/slab.h:664 [inline]
ucma_process_join+0x16e/0×3f0 drivers/infiniband/core/ucma.c:1453
ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538
ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724
vfs_write fs/read_write.c:603 [inline]
vfs_write+0x191/0×4c0 fs/read_write.c:585
ksys_write+0x1a1/0×1e0 fs/read_write.c:658
do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 359:
kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48
kasan_set_track+0x1c/0×30 mm/kasan/common.c:56
kasan_set_free_info+0x1b/0×30 mm/kasan/generic.c:355
__kasan_slab_free+0x112/0×160 mm/kasan/common.c:422
slab_free_hook mm/slub.c:1544 [inline]
slab_free_freelist_hook mm/slub.c:1577 [inline]
slab_free mm/slub.c:3142 [inline]
kfree+0xb3/0×3e0 mm/slub.c:4124
ucma_process_join+0x22d/0×3f0 drivers/infiniband/core/ucma.c:1497
ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538
ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724
vfs_write fs/read_write.c:603 [inline]
vfs_write+0x191/0×4c0 fs/read_write.c:585
ksys_write+0x1a1/0×1e0 fs/read_write.c:658
do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff88810b3ad100
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 16 bytes inside of
192-byte region [ffff88810b3ad100, ffff88810b3ad1c0)
Fixes: b5de0c60cc ("RDMA/cma: Fix use after free race in roce multicast join")
Link: https://lore.kernel.org/r/20210211090517.1278415-1-leon@kernel.org
Reported-by: Amit Matityahu <mitm@nvidia.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
drivers/infiniband/core/device.c:859: warning: Function parameter or member 'dev' not described in 'ib_port_immutable_read'
drivers/infiniband/core/device.c:859: warning: Function parameter or member 'port' not described in 'ib_port_immutable_read'
Fixes: 7416790e22 ("RDMA/core: Introduce and use API to read port immutable data")
Link: https://lore.kernel.org/r/20210210151421.1108809-1-leon@kernel.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the following coccicheck warning:
./drivers/infiniband/hw/qedr/qedr.h:629:9-10: WARNING: return of 0/1 in
function 'qedr_qp_has_rq' with return type bool.
./drivers/infiniband/hw/qedr/qedr.h:620:9-10: WARNING: return of 0/1 in
function 'qedr_qp_has_sq' with return type bool.
Link: https://lore.kernel.org/r/1612949901-109873-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
FRMR is not well-supported on HIP08, it is re-designed for HIP09 and the
position of related fields is changed. Then the ULPs should be forbidden
to use FRMR on older hardwares.
Link: https://lore.kernel.org/r/1612924424-28217-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The register 0x07014 is actually the head pointer of CMDQ, and 0x07010
means tail pointer. Current definitions are confusing, so rename them and
related variables.
The next_to_use of structure hns_roce_v2_cmq_ring has the same semantics
as head, merge them into one member. The next_to_clean of structure
hns_roce_v2_cmq_ring has the same semantics as tail. After deleting
next_to_clean, tail should also be deleted.
Link: https://lore.kernel.org/r/1612688143-28226-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
CMDQ works serially, after each successful transmission, the head and tail
pointers will be equal, so there is no need to check whether the queue is
full. At the same time, since the descriptor of each transmission is new,
there is no need to perform a cleanup operation. Then, the field named
next_to_clean in structure hns_roce_v2_cmq_ring is redundant.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1612688143-28226-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When posting a multi-descriptors command, the error code of previous
failed descriptors may be rewrote to 0 by a later successful descriptor.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1612688143-28226-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
last_status of structure hns_roce_v2_cmq has never been used, and the
variable named 'complete' in __hns_roce_cmq_send() is meaningless.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1612688143-28226-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a system receives a REREG event from the SM, then the SM information
in the kernel is marked as invalid and a request is sent to the SM to
update the information. The SM information is invalid in that time period.
However, receiving a REREG also occurs simultaneously in user space
applications that are now trying to rejoin the multicast groups. Some of
those may be sendonly multicast groups which are then failing.
If the SM information is invalid then ib_sa_sendonly_fullmem_support()
returns false. That is wrong because it just means that we do not know yet
if the potentially new SM supports sendonly joins.
Sendonly join was introduced in 2015 and all the Subnet managers have
supported it ever since. So there is no point in checking if a subnet
manager supports it.
Should an old opensm get a request for a sendonly join then the request
will fail. The code that is removed here accomodated that situation and
fell back to a full join.
Falling back to a full join is problematic in itself. The reason to use
the sendonly join was to reduce the traffic on the Infiniband fabric
otherwise one could have just stayed with the regular join. So this patch
may cause users of very old opensms to discover that lots of traffic
needlessly crosses their IB fabrics.
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2101281845160.13303@www.lameter.com
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Support 400Gbps IB rate in mlx5 driver.
Link: https://lore.kernel.org/r/20210209130429.698237-1-leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
qedr_gsi_post_send() has a debug output which prints the return value of
in_irq() and irqs_disabled().
The result of the in_irq(), even if invoked from an interrupt handler, is
subject to change depending on the `threadirqs' command line switch. The
result of irqs_disabled() is always be 1 because the function acquires
spinlock_t with spin_lock_irqsave().
Remove in_irq() and irqs_disabled() from the debug output because it
provides little value.
Link: https://lore.kernel.org/r/20210208193347.383254-1-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch changes the type of init_send_wqe in rxe_verbs.c to void since
it always returns 0. It also separates out the code that copies inline
data into the send wqe as copy_inline_data_to_wqe().
Link: https://lore.kernel.org/r/20210206002437.2756-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
checkpatch -f found 3 warnings in RDMA/rxe
1. a missing space following switch
2. return followed by else
3. use of strlcpy() instead of strscpy().
This patch fixes each of these. In
...
} elseif (...) {
...
return 0;
} else
...
The middle block can be safely moved since it is completely independent of
the other code.
Link: https://lore.kernel.org/r/20210205230525.49068-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cleanup the synchronize_srcu() from the ODP flow as it was found to be a
very heavy time consumer as part of dereg_mr.
For example de-registration of 10000 ODP MRs each with size of 2M hugepage
took 19.6 sec comparing de-registration of same number of non ODP MRs that
took 172 ms.
The new locking scheme uses the wait_event() mechanism which follows the
use count of the MR instead of using synchronize_srcu().
By that change, the time required for the above test took 95 ms which is
even better than the non ODP flow.
Once fully dropped the srcu usage, had to come with a lock to protect the
XA access.
As part of using the above mechanism we could also clean the
num_deferred_work stuff and follow the use count instead.
Link: https://lore.kernel.org/r/20210202071309.2057998-1-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to use a for loop to assign values for an array of cmd
descriptors which has only two elements.
Link: https://lore.kernel.org/r/1612517974-31867-13-git-send-email-liweihang@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hns driver wrap around the consumer index of AEQ and CEQ when they
reach to two times of queue entries number for owner mechanism, actually,
it is unnecessary to wrap around since the hardware itself will mask it
before use.
Link: https://lore.kernel.org/r/1612517974-31867-12-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All fields of WQE will be rewrote, so the memset is unnecessary. And when
SQ is working in OWNER mode, the pipeline may prefetch the WQEs beyond PI,
the memset operation may flip the owner bit too early, then the pipeline
may get a wrong WQ.
Link: https://lore.kernel.org/r/1612517974-31867-11-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use macros instead of magic numbers to represent shift of dma_handle_wqe,
dma_handle_idx and UDP destination port number of RoCEv2.
Link: https://lore.kernel.org/r/1612517974-31867-10-git-send-email-liweihang@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hns_roce_device.h is not specific to hardware, some definitions are only
used for HIP06, they should be moved into hns_roce_hw_v1.h.
Link: https://lore.kernel.org/r/1612517974-31867-9-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, the driver updates doorbell looks like this:
post()
{
wqe.field = 0x111;
wmb();
update_wq_db();
}
update_wq_db()
{
db.field = 0x222;
__raw_writeq(db, db_reg);
}
writeq() is a better choice than __raw_writeq() because it calls dma_wmb()
to barrier in ARM64, and dma_wmb() is better than wmb() for ROCEE device.
This patch removes all wmb() before updating doorbell of SQ/RQ/CQ/SRQ by
replacing __raw_writeq() with writeq() to improve performence. The new
process looks like this:
post()
{
wqe.field = 0x111;
update_wq_db();
}
update_wq_db()
{
db.field = 0x222;
writeq(db, db_reg);
}
Link: https://lore.kernel.org/r/1612517974-31867-8-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This feature should only be enabled by querying capability from firmware.
Fixes: ba6bb7e974 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1612517974-31867-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add the mapped page count checking flow to avoid invalid page size when
creating MTR.
Fixes: 38389eaa4d ("RDMA/hns: Add mtr support for mixed multihop addressing")
Link: https://lore.kernel.org/r/1612517974-31867-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This bit should be in type of enum ib_sig_type, or there will be a sparse
warning.
Fixes: bfe860351e ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
Link: https://lore.kernel.org/r/1612517974-31867-3-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ULP usually set IB(V)_QP_AV when trying to modify QP to RTR if they want
to record sgid index into QPC. For UD QPs, it is useless because it will
be included in WQE. For RC QPs, it will be filled in
hns_roce_set_path(). So sgid index shouldn't be filled by default. Then
hns_get_gid_index() is moved to hns_roce_hw_v1.c because it is only called
in it.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1612517974-31867-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Direct wqe is a mechanism to fill wqe directly into the hardware. In the
case of light load, the wqe will be filled into pcie bar space of the
hardware, this will reduce one memory access operation and therefore
reduce the latency.
Link: https://lore.kernel.org/r/1611997513-27107-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The SRQ in the hns driver consists of the following four parts:
* wqe buf: the buffer to store WQE.
* wqe_idx buf: the cqe of SRQ may be not generated in the order of wqe, so
the wqe_idx corresponding to the idle WQE needs to be pushed into the
index queue which is a FIFO, then it instructs the hardware to obtain
the corresponding WQE.
* bitmap: bitmap is used to generate and release wqe_idx. When the user
has a new WR, the driver finds the idx of the idle wqe in bitmap. When
the CQE of wqe is generated, the driver will release the idx.
* wr_id buf: wr_id buf is used to store the user's wr_id, then return it
to the user when poll_cq verb is invoked.
The process of post SRQ recv is refactored to make preceding code clearer.
Link: https://lore.kernel.org/r/1611997090-48820-12-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The HIP09 requires the driver to clear the unused data segments in wqe
buffer to make the hns ROCEE stop reading the remaining invalid sges for
RQ.
Link: https://lore.kernel.org/r/1611997090-48820-11-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reduce parameter numbers of write_srqc() and move some related code into
it from alloc_srqc().
Link: https://lore.kernel.org/r/1611997090-48820-8-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Split the SRQ creation process into multiple steps and encapsulate them
into functions.
Link: https://lore.kernel.org/r/1611997090-48820-7-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each SRQs contain an reserved WQE, it is inappropriate and should be
removed.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-6-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When an error occurs, the qp_table must be cleared, regardless of whether
the SRQ feature is enabled.
Fixes: 5c1f167af1 ("RDMA/hns: Init SRQ table for hip08")
Link: https://lore.kernel.org/r/1611997090-48820-5-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the IB Specification, srq_limit shouldn't be configured
during SRQ creation. If a user set srq_limit at this time, the driver
should forced it to zero, or the result of creating SRQ will conflict with
the result of querying SRQ.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If a user posts WR by wr_list, the head pointer of idx_queue won't be
updated until all wqes are filled, so the judgment of whether head equals
to tail will get a wrong result. Fix above issue and move the head and
tail pointer from the srq structure into the idx_queue structure. After
idx_queue is filled with wqe idx, the head pointer of it will increase.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RQ/SRQ of HIP08 needs one special sge to stop receive reliably. So the
driver needs to allocate at least one SGE when creating RQ/SRQ and ensure
that at least one SGE is filled with the special value during post_recv.
Besides, the kernel driver should only do this for kernel ULP. For
userspace ULP, the userspace driver will allocate the reserved SGE in
buffer, and the kernel driver just needs to pin the corresponding size of
memory based on the userspace driver's requirements.
Link: https://lore.kernel.org/r/1611997090-48820-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_udp_encap_recv() drops the reference to rxe->ib_dev taken by
rxe_get_dev_from_net() which should be held until each received skb is
freed. This patch moves the calls to ib_device_put() to each place a
received skb is freed. It also takes references to the ib_device for each
cloned skb created to process received multicast packets.
Fixes: 4c173f596b ("RDMA/rxe: Use ib_device_get_by_netdev() instead of open coding")
Link: https://lore.kernel.org/r/20210128233318.2591-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_net.c sends packets at the IP layer with skb->data pointing at the IP
header but receives packets from a UDP tunnel with skb->data pointing at
the UDP header. On the loopback path this was not correctly accounted
for. This patch corrects for this by using sbk_pull() to strip the IP
header from the skb on received packets.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210128182301.16859-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_rcv_mcast_pkt() in rxe_recv.c can leak SKBs in error path code. The
loop over the QPs attached to a multicast group creates new cloned SKBs
for all but the last QP in the list and passes the SKB and its clones to
rxe_rcv_pkt() for further processing. Any QPs that do not pass some checks
are skipped. If the last QP in the list fails the tests the SKB is
leaked. This patch checks if the SKB for the last QP was used and if not
frees it. Also removes a redundant loop invariant assignment.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Fixes: 71abf20b28 ("RDMA/rxe: Handle skb_clone() failure in rxe_recv.c")
Link: https://lore.kernel.org/r/20210128174752.16128-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In check_keys() in rxe_recv.c
if ((...) && pkt->mask) {
...
}
always has pkt->mask non zero since in rxe_udp_encap_recv() pkt->mask is
always set to RXE_GRH_MASK (!= 0). There is no obvious reason for this
additional test and the original intent is lost. This patch simplifies the
expression.
Fixes: 8b7b59d030 ("IB/rxe: remove redudant qpn check")
Link: https://lore.kernel.org/r/20210127224203.2812-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
check_type_state() in rxe_recv.c is written as if the type bits in the
packet opcode were a bit mask which is not correct. This patch corrects
this code to compare all 3 type bits to the required type.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210127214500.3707-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of open coding the loop for port iteration, use rdma_for_each_port
macro provided by core.
To use such macro, early initialization of phys_port_cnt is needed.
Hence, initialize such constant early enough in the init stage.
Whichever functions are called with port using rdma_for_each_port(),
convert their port type from u8 to unsigned int to match the core API.
Link: https://lore.kernel.org/r/20210203130133.4057329-6-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently mlx5 driver caches port GID table length for 2 ports. It is
also cached by IB core as port immutable data.
When mlx5 representor ports are present, which are usually more than 2,
invalid access to port_caps array can happen while validating the GID
table length which is only for 2 ports.
To avoid this, take help of the IB cores port immutable data by exposing
an API to read the port immutable fields.
Remove mlx5 driver's internal cache, thereby reduce code and data.
Link: https://lore.kernel.org/r/20210203130133.4057329-5-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Improve query port functionality for representor port as below.
1. RoCE Qkey violation counters are not applicable for representor port.
2. Avoid setting gid_tbl_len twice for representor port.
3. Avoid setting ip_gids and IB_PORT_CM_SUP property for representor port
as GID table is empty and CM support is not present in representor
mode.
Link: https://lore.kernel.org/r/20210203130133.4057329-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pkey table length for all the ports of the device is the same. Currently
get_ports_cap() reads and stores it for each port by querying the device
which reads more than just pkey table length.
For representor device ports which can be in range of hundreds, it queries
is for each such port and end up returning same value for all the ports.
When in representor mode, modify QP accesses pkey port caps for a port
index that can be outside of the port_caps table.
Hence, simplify the logic to query the max pkey table length only once
during device initialization sequence.
Link: https://lore.kernel.org/r/20210203130133.4057329-3-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5_port_caps are RDMA specific capabilities. These are not used by the
mlx5_core_device at all. Move them to mlx5_ib_dev where it is used and
reduce the scope of it to multiple drivers.
Link: https://lore.kernel.org/r/20210203130133.4057329-2-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Representor port has only one default pkey. Hence have simpler query pkey
callback or it.
Link: https://lore.kernel.org/r/20210127150010.1876121-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
IB HCA port starts from 1. Use IB core provided port iterator API to avoid
any assumption with start port number.
Link: https://lore.kernel.org/r/20210127150010.1876121-11-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use IB core provided routine to check if the port is valid or not and to
iterate over IB ports.
Link: https://lore.kernel.org/r/20210127150010.1876121-10-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When RDMA device has 255 ports, loop iterator i overflows. Due to which
cm_add_one() port iterator loops infinitely. Use core provided port
iterator to avoid the infinite loop.
Fixes: a977049dac ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20210127150010.1876121-9-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When mlx5_ib_stage_init_init() fails, return the error code related to
failure instead of -ENOMEM.
Fixes: 16c1975f10 ("IB/mlx5: Create profile infrastructure to add and remove stages")
Link: https://lore.kernel.org/r/20210127150010.1876121-8-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The 'select' field in the get/set feature admin command is unimplemented,
unused and misleading, remove it. The command always refers to the
current values.
Link: https://lore.kernel.org/r/20210126120702.9807-5-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The indentation in the subsequent comment lines is unnecessary, remove it.
Link: https://lore.kernel.org/r/20210126120702.9807-4-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The EFA_DMA_ADDR_TO_UINT32_HIGH/LOW macros are the same as the kernel's
upper/lower_32_bits, remove them and use kernel macros instead.
Link: https://lore.kernel.org/r/20210126120702.9807-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A pointer to store the command completion must be provided as it is always
used in efa_com_put_comp_ctx() to return the completion context back to
the pool. Remove the NULL pointer check and the redundant 'status' field
stored on the context as it could be retrieved from the completion itself.
Link: https://lore.kernel.org/r/20210126120702.9807-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/rc.c:1388: warning: Function parameter or member 'packet' not described in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:1388: warning: Function parameter or member 'is_fecn' not described in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:1388: warning: Excess function parameter 'qp' description in 'hfi1_send_rc_ack'
Link: https://lore.kernel.org/r/20210126124732.3320971-21-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/verbs.c:741: warning: Function parameter or member 'qp' not described in 'update_tx_opstats'
drivers/infiniband/hw/hfi1/verbs.c:1160: warning: Function parameter or member 'pkey' not described in 'egress_pkey_check'
drivers/infiniband/hw/hfi1/verbs.c:1160: warning: Excess function parameter 'bkey' description in 'egress_pkey_check'
drivers/infiniband/hw/hfi1/verbs.c:1217: warning: Function parameter or member 'qp' not described in 'get_send_routine'
drivers/infiniband/hw/hfi1/verbs.c:1217: warning: Function parameter or member 'ps' not described in 'get_send_routine'
Link: https://lore.kernel.org/r/20210126124732.3320971-20-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'fd' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'tidbuf' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'node' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'idx' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'npages' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'mapped' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:196: warning: Function parameter or member 'fd' not described in 'pin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:196: warning: Function parameter or member 'tidbuf' not described in 'pin_rcv_pages'
Link: https://lore.kernel.org/r/20210126124732.3320971-19-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/ud.c:477: warning: Function parameter or member 'ps' not described in 'hfi1_make_ud_req'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Function parameter or member 'packet' not described in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'ibp' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'hdr' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'rcv_flags' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'data' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'tlen' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'qp' description in 'hfi1_ud_rcv'
Link: https://lore.kernel.org/r/20210126124732.3320971-18-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/uc.c:64: warning: Function parameter or member 'ps' not described in 'hfi1_make_uc_req'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Function parameter or member 'packet' not described in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'ibp' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'hdr' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'rcv_flags' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'data' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'tlen' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'qp' description in 'hfi1_uc_rcv'
Link: https://lore.kernel.org/r/20210126124732.3320971-17-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/tid_rdma.c:321: warning: Function parameter or member 'rdi' not described in 'qp_to_rcd'
drivers/infiniband/hw/hfi1/tid_rdma.c:321: warning: Function parameter or member 'qp' not described in 'qp_to_rcd'
drivers/infiniband/hw/hfi1/tid_rdma.c:505: warning: Function parameter or member 'queue' not described in 'kernel_tid_waiters'
drivers/infiniband/hw/hfi1/tid_rdma.c:536: warning: Function parameter or member 'rcd' not described in 'dequeue_tid_waiter'
drivers/infiniband/hw/hfi1/tid_rdma.c:536: warning: Function parameter or member 'queue' not described in 'dequeue_tid_waiter'
drivers/infiniband/hw/hfi1/tid_rdma.c:536: warning: Function parameter or member 'qp' not described in 'dequeue_tid_waiter'
drivers/infiniband/hw/hfi1/tid_rdma.c:562: warning: Function parameter or member 'queue' not described in 'queue_qp_for_tid_wait'
drivers/infiniband/hw/hfi1/tid_rdma.c:607: warning: Function parameter or member 'qp' not described in 'tid_rdma_schedule_tid_wakeup'
drivers/infiniband/hw/hfi1/tid_rdma.c:639: warning: Function parameter or member 'work' not described in 'tid_rdma_trigger_resume'
drivers/infiniband/hw/hfi1/tid_rdma.c:666: warning: Function parameter or member 'qp' not described in '_tid_rdma_flush_wait'
drivers/infiniband/hw/hfi1/tid_rdma.c:666: warning: Function parameter or member 'queue' not described in '_tid_rdma_flush_wait'
drivers/infiniband/hw/hfi1/tid_rdma.c:713: warning: Function parameter or member 'rcd' not described in 'kern_reserve_flow'
drivers/infiniband/hw/hfi1/tid_rdma.c:713: warning: Function parameter or member 'last' not described in 'kern_reserve_flow'
drivers/infiniband/hw/hfi1/tid_rdma.c:879: warning: Function parameter or member 'flow' not described in 'tid_rdma_find_phys_blocks_4k'
drivers/infiniband/hw/hfi1/tid_rdma.c:879: warning: Function parameter or member 'pages' not described in 'tid_rdma_find_phys_blocks_4k'
drivers/infiniband/hw/hfi1/tid_rdma.c:879: warning: Function parameter or member 'npages' not described in 'tid_rdma_find_phys_blocks_4k'
drivers/infiniband/hw/hfi1/tid_rdma.c:879: warning: Function parameter or member 'list' not described in 'tid_rdma_find_phys_blocks_4k'
drivers/infiniband/hw/hfi1/tid_rdma.c:972: warning: Function parameter or member 'list' not described in 'tid_flush_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:972: warning: Function parameter or member 'idx' not described in 'tid_flush_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:972: warning: Function parameter or member 'pages' not described in 'tid_flush_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:972: warning: Function parameter or member 'sets' not described in 'tid_flush_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1017: warning: Function parameter or member 'flow' not described in 'tid_rdma_find_phys_blocks_8k'
drivers/infiniband/hw/hfi1/tid_rdma.c:1017: warning: Function parameter or member 'pages' not described in 'tid_rdma_find_phys_blocks_8k'
drivers/infiniband/hw/hfi1/tid_rdma.c:1017: warning: Function parameter or member 'npages' not described in 'tid_rdma_find_phys_blocks_8k'
drivers/infiniband/hw/hfi1/tid_rdma.c:1017: warning: Function parameter or member 'list' not described in 'tid_rdma_find_phys_blocks_8k'
drivers/infiniband/hw/hfi1/tid_rdma.c:1083: warning: Function parameter or member 'flow' not described in 'kern_find_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1083: warning: Function parameter or member 'pages' not described in 'kern_find_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1083: warning: Function parameter or member 'ss' not described in 'kern_find_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1083: warning: Function parameter or member 'last' not described in 'kern_find_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1604: warning: Function parameter or member 'req' not described in 'hfi1_kern_exp_rcv_free_flows'
drivers/infiniband/hw/hfi1/tid_rdma.c:3458: warning: Function parameter or member 'qp' not described in 'hfi1_tid_write_alloc_resources'
drivers/infiniband/hw/hfi1/tid_rdma.c:3458: warning: Function parameter or member 'intr_ctx' not described in 'hfi1_tid_write_alloc_resources'
Link: https://lore.kernel.org/r/20210126124732.3320971-16-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/sdma.c:2476: warning: Function parameter or member 'count_out' not described in 'sdma_send_txlist'
drivers/infiniband/hw/hfi1/sdma.c:2476: warning: Excess function parameter 'count' description in 'sdma_send_txlist'
Link: https://lore.kernel.org/r/20210126124732.3320971-15-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/ruc.c:277: warning: Function parameter or member 'bth1' not described in 'hfi1_make_ruc_header_16B'
drivers/infiniband/hw/hfi1/ruc.c:365: warning: Function parameter or member 'bth1' not described in 'hfi1_make_ruc_header_9B'
drivers/infiniband/hw/hfi1/ruc.c:472: warning: Function parameter or member 'tid' not described in 'hfi1_schedule_send_yield'
drivers/infiniband/hw/hfi1/ruc.c:472: warning: Excess function parameter 'timeout' description in 'hfi1_schedule_send_yield'
Link: https://lore.kernel.org/r/20210126124732.3320971-14-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/qp.c:195: warning: Function parameter or member 'dev' not described in 'verbs_mtu_enum_to_int'
drivers/infiniband/hw/hfi1/qp.c:195: warning: Function parameter or member 'mtu' not described in 'verbs_mtu_enum_to_int'
drivers/infiniband/hw/hfi1/qp.c:306: warning: Function parameter or member 'qp' not described in 'hfi1_setup_wqe'
drivers/infiniband/hw/hfi1/qp.c:306: warning: Function parameter or member 'wqe' not described in 'hfi1_setup_wqe'
drivers/infiniband/hw/hfi1/qp.c:306: warning: Function parameter or member 'call_send' not described in 'hfi1_setup_wqe'
drivers/infiniband/hw/hfi1/qp.c:922: warning: Function parameter or member 'qp' not described in 'hfi1_qp_iter_cb'
drivers/infiniband/hw/hfi1/qp.c:922: warning: Function parameter or member 'v' not described in 'hfi1_qp_iter_cb'
Link: https://lore.kernel.org/r/20210126124732.3320971-13-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/rc.c:430: warning: Function parameter or member 'ps' not described in 'hfi1_make_rc_req'
drivers/infiniband/hw/hfi1/rc.c:1387: warning: Function parameter or member 'packet' not described in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:1387: warning: Function parameter or member 'is_fecn' not described in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:1387: warning: Excess function parameter 'qp' description in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:2008: warning: Function parameter or member 'aeth' not described in 'do_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:2008: warning: Function parameter or member 'val' not described in 'do_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:2008: warning: Function parameter or member 'rcd' not described in 'do_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:2554: warning: Function parameter or member 'rcd' not described in 'rc_rcv_error'
Link: https://lore.kernel.org/r/20210126124732.3320971-12-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/pio_copy.c:73: warning: Function parameter or member 'dd' not described in 'pio_copy'
Link: https://lore.kernel.org/r/20210126124732.3320971-11-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/pcie.c:343: warning: Function parameter or member 'dd' not described in 'restore_pci_variables'
drivers/infiniband/hw/hfi1/pcie.c:402: warning: Function parameter or member 'dd' not described in 'save_pci_variables'
Link: https://lore.kernel.org/r/20210126124732.3320971-10-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/netdev_rx.c:473: warning: Function parameter or member 'start_id' not described in 'hfi1_netdev_get_first_data'
drivers/infiniband/hw/hfi1/netdev_rx.c:473: warning: Excess function parameter 'id' description in 'hfi1_netdev_get_first_data'
Link: https://lore.kernel.org/r/20210126124732.3320971-9-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/qp.c:1929: warning: Function parameter or member 'post_parms' not described in 'rvt_qp_valid_operation'
Link: https://lore.kernel.org/r/20210126124732.3320971-8-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/mad.c:78: warning: Function parameter or member 'in_mad_size' not described in 'rvt_process_mad'
Link: https://lore.kernel.org/r/20210126124732.3320971-7-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/msix.c:120: warning: Function parameter or member 'name' not described in 'msix_request_irq'
drivers/infiniband/hw/hfi1/msix.c:120: warning: Excess function parameter 'idx' description in 'msix_request_irq'
Link: https://lore.kernel.org/r/20210126124732.3320971-6-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'am' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'data' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'resp_len' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'max_len' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'local_mad' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:4919: warning: Function parameter or member 'out_mad_size' not described in 'hfi1_process_mad'
drivers/infiniband/hw/hfi1/mad.c:4919: warning: Function parameter or member 'out_mad_pkey_index' not described in 'hfi1_process_mad'
Link: https://lore.kernel.org/r/20210126124732.3320971-5-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Function parameter or member 'tidfunc' not described in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Function parameter or member 'wakeup' not described in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Function parameter or member 'sdma_drained' not described in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Function parameter or member 'init_priority' not described in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Excess function parameter 'resume' description in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:94: warning: Function parameter or member 'w' not described in 'iowait_set_work_flag'
Link: https://lore.kernel.org/r/20210126124732.3320971-4-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/srq.c:78: warning: Function parameter or member 'ibsrq' not described in 'rvt_create_srq'
drivers/infiniband/sw/rdmavt/srq.c:78: warning: Excess function parameter 'ibpd' description in 'rvt_create_srq'
drivers/infiniband/sw/rdmavt/srq.c:336: warning: Function parameter or member 'udata' not described in 'rvt_destroy_srq'
Link: https://lore.kernel.org/r/20210126124732.3320971-3-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/intr.c:99: warning: Function parameter or member 'msg' not described in 'format_hwmsg'
drivers/infiniband/hw/hfi1/intr.c:99: warning: Function parameter or member 'msgl' not described in 'format_hwmsg'
drivers/infiniband/hw/hfi1/intr.c:99: warning: Function parameter or member 'hwmsg' not described in 'format_hwmsg'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'hwerrs' not described in 'hfi1_format_hwerrors'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'hwerrmsgs' not described in 'hfi1_format_hwerrors'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'nhwerrmsgs' not described in 'hfi1_format_hwerrors'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'msg' not described in 'hfi1_format_hwerrors'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'msgl' not described in 'hfi1_format_hwerrors'
Link: https://lore.kernel.org/r/20210126124732.3320971-2-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
One of the pool APIs for when caller is holding lock was not defined but
is declared in rxe_pool.h. This patch adds the definition.
Link: https://lore.kernel.org/r/20210125211641.2694-7-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_pool.c uses the field pool->state to mark a pool as invalid when it is
shut down and checks it in several pool APIs to verify that the pool has
not been shut down. This is unneeded because the pools are not marked
invalid unless the entire driver is being removed at which point no
functional APIs should or could be executing. This patch removes this
field and associated code.
Link: https://lore.kernel.org/r/20210125211641.2694-6-rpearson@hpe.com
Suggested-by: zyjzyj2000@gmail.c
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_pool.c takes references to the pool and ib_device structs for each
object allocated and also keeps an atomic num_elem count in each
pool. This is more work than is needed. Pool allocation is only called
from verbs APIs which already have references to ib_device and pools are
only diasbled when the driver is removed so no protection of the pool
addresses are needed. The elem count is used to warn if elements are still
present in a pool when it is cleaned up which is useful.
This patch eliminates the references to the ib_device and pool structs.
Link: https://lore.kernel.org/r/20210125211641.2694-5-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_alloc() used the RXE_POOL_ATOMIC flag in rxe_type_info to select
GFP_ATOMIC in calls to kzalloc(). This was intended to handle cases where
an object could be created in interrupt context. This no longer occurs
since allocating those objects has moved into the core so this flag is not
necessary. An incorrect use of this flag was still present for rxe_mc_elem
objects and is removed.
Link: https://lore.kernel.org/r/20210125211641.2694-4-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The names and comments of the 'unlocked' pool APIs are very misleading and
not what was intended. This patch replaces 'rxe_xxx_nl' with
'rxe_xxx_locked' with comments indicating that the caller is expected to
hold the rxe pool lock.
Link: https://lore.kernel.org/r/20210125211641.2694-3-rpearson@hpe.com
Reported-by: Hillf Danton <hdanton@sina.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A recent patch which added an 'unlocked' version of rxe_alloc introduced a
bug causing kzalloc(..., GFP_KERNEL) to be called while holding a spin
lock. This patch corrects that error.
rxe_alloc_nl() should always be called while holding the pool->pool_lock
so the 2nd argument to kzalloc there should be GFP_ATOMIC.
rxe_alloc() prior to the change only locked the code around checking that
pool->state is RXE_POOL_STATE_VALID to avoid races between working threads
and a thread shutting down the rxe driver. This patch reverts rxe_alloc()
to this behavior so the lock is not held when kzalloc() is called.
Link: https://lore.kernel.org/r/20210125211641.2694-2-rpearson@hpe.com
Reported-by: syzbot+ec2fd72374785d0e558e@syzkaller.appspotmail.com
Fixes: 3853c35e24 ("RDMA/rxe: Add unlocked versions of pool APIs")
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, polling a umad device will always works, even if the device was
disassociated. A disassociated device should immediately return EPOLLERR
from poll(). Otherwise userspace is endlessly hung on poll() with no idea
that the device has been removed from the system.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20210125121339.837518-3-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
MAD message received by the user has EINVAL error in all flows
including when the device is disassociated. That makes it impossible
for the applications to treat such flow differently.
Change it to return EIO, so the applications will be able to perform
disassociation recovery.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20210125121339.837518-2-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The cited commit disallowed creating any QP which isn't raw ethernet, reg
umr or the special UD qp for testing WC, this proved too strict.
While modify can't be done (no GIDS/GID table for example) just creating a
QP is okay.
This patch partially reverts the bellow mentioned commit and places the
restriction at the modify QP stage and not at the creation. DEVX commands
should be used to manipulate such QPs.
Fixes: 42caf9cb59 ("RDMA/mlx5: Allow only raw Ethernet QPs when RoCE isn't enabled")
Link: https://lore.kernel.org/r/20210125120709.836718-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When creating or re-registering an MR, storing the PDN, access flag and
IOVA information ASAP can simplify the number of parameters passed into
the subsequent process.
Link: https://lore.kernel.org/r/1611395282-991-3-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Split the hns_roce_mtr_create() into serval small functions, remove unused
member in 'struct hns_roce_buf_attr' and delete unnecessary MTR page count
check flow to make the MTR creation related codes clearer.
Link: https://lore.kernel.org/r/1611395282-991-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/qp.c:165: warning: Function parameter or member 'rdi' not described in 'rvt_wss_init'
drivers/infiniband/sw/rdmavt/qp.c:329: warning: Function parameter or member 'rdi' not described in 'init_qpn_table'
drivers/infiniband/sw/rdmavt/qp.c:534: warning: Function parameter or member 'type' not described in 'alloc_qpn'
drivers/infiniband/sw/rdmavt/qp.c:664: warning: Function parameter or member 'wqe' not described in 'rvt_swqe_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:664: warning: Function parameter or member 'lkey' not described in 'rvt_swqe_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:682: warning: Function parameter or member 'qp' not described in 'rvt_qp_sends_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:682: warning: Function parameter or member 'lkey' not described in 'rvt_qp_sends_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:706: warning: Function parameter or member 'qp' not described in 'rvt_qp_acks_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:706: warning: Function parameter or member 'lkey' not described in 'rvt_qp_acks_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:866: warning: Function parameter or member 'rdi' not described in 'rvt_init_qp'
drivers/infiniband/sw/rdmavt/qp.c:920: warning: Function parameter or member 'rdi' not described in '_rvt_reset_qp'
drivers/infiniband/sw/rdmavt/qp.c:1736: warning: Function parameter or member 'udata' not described in 'rvt_destroy_qp'
drivers/infiniband/sw/rdmavt/qp.c:1924: warning: Function parameter or member 'qp' not described in 'rvt_qp_valid_operation'
drivers/infiniband/sw/rdmavt/qp.c:1924: warning: Function parameter or member 'post_parms' not described in 'rvt_qp_valid_operation'
drivers/infiniband/sw/rdmavt/qp.c:1924: warning: Function parameter or member 'wr' not described in 'rvt_qp_valid_operation'
drivers/infiniband/sw/rdmavt/qp.c:2020: warning: Function parameter or member 'call_send' not described in 'rvt_post_one_wr'
drivers/infiniband/sw/rdmavt/qp.c:2621: warning: Function parameter or member 'qp' not described in 'rvt_stop_rnr_timer'
Link: https://lore.kernel.org/r/20210121094519.2044049-31-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_iba6120.c:1229: warning: Function parameter or member 'ppd' not described in 'qib_6120_bringup_serdes'
drivers/infiniband/hw/qib/qib_iba6120.c:1229: warning: Excess function parameter 'dd' description in 'qib_6120_bringup_serdes'
drivers/infiniband/hw/qib/qib_iba6120.c:1436: warning: Function parameter or member 'ppd' not described in 'qib_6120_setup_setextled'
drivers/infiniband/hw/qib/qib_iba6120.c:1436: warning: Excess function parameter 'dd' description in 'qib_6120_setup_setextled'
drivers/infiniband/hw/qib/qib_iba6120.c:1836: warning: Function parameter or member 'type' not described in 'qib_6120_put_tid'
drivers/infiniband/hw/qib/qib_iba6120.c:1836: warning: Excess function parameter 'tidtype' description in 'qib_6120_put_tid'
drivers/infiniband/hw/qib/qib_iba6120.c:1903: warning: Function parameter or member 'type' not described in 'qib_6120_put_tid_2'
drivers/infiniband/hw/qib/qib_iba6120.c:1903: warning: Excess function parameter 'tidtype' description in 'qib_6120_put_tid_2'
drivers/infiniband/hw/qib/qib_iba6120.c:1944: warning: Function parameter or member 'rcd' not described in 'qib_6120_clear_tids'
drivers/infiniband/hw/qib/qib_iba6120.c:1944: warning: Excess function parameter 'ctxt' description in 'qib_6120_clear_tids'
drivers/infiniband/hw/qib/qib_iba6120.c:2018: warning: Function parameter or member 'kinfo' not described in 'qib_6120_get_base_info'
drivers/infiniband/hw/qib/qib_iba6120.c:2018: warning: Excess function parameter 'kbase' description in 'qib_6120_get_base_info'
drivers/infiniband/hw/qib/qib_iba6120.c:2277: warning: Function parameter or member 'ppd' not described in 'qib_portcntr_6120'
drivers/infiniband/hw/qib/qib_iba6120.c:2277: warning: Function parameter or member 'reg' not described in 'qib_portcntr_6120'
drivers/infiniband/hw/qib/qib_iba6120.c:2277: warning: Excess function parameter 'dd' description in 'qib_portcntr_6120'
drivers/infiniband/hw/qib/qib_iba6120.c:2277: warning: Excess function parameter 'creg' description in 'qib_portcntr_6120'
drivers/infiniband/hw/qib/qib_iba6120.c:2620: warning: Function parameter or member 't' not described in 'qib_get_6120_faststats'
Link: https://lore.kernel.org/r/20210121094519.2044049-30-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_verbs.c:1077: warning: Function parameter or member 'ppd' not described in 'qib_get_counters'
drivers/infiniband/hw/qib/qib_verbs.c:1077: warning: Excess function parameter 'dd' description in 'qib_get_counters'
drivers/infiniband/hw/qib/qib_verbs.c:1686: warning: Function parameter or member 'qp' not described in '_qib_schedule_send'
drivers/infiniband/hw/qib/qib_verbs.c:1703: warning: Function parameter or member 'qp' not described in 'qib_schedule_send'
Link: https://lore.kernel.org/r/20210121094519.2044049-29-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_iba7322.c:2521: warning: Function parameter or member 'ppd' not described in 'qib_7322_mini_quiet_serdes'
drivers/infiniband/hw/qib/qib_iba7322.c:2521: warning: Excess function parameter 'dd' description in 'qib_7322_mini_quiet_serdes'
drivers/infiniband/hw/qib/qib_iba7322.c:3768: warning: Function parameter or member 'type' not described in 'qib_7322_put_tid'
drivers/infiniband/hw/qib/qib_iba7322.c:3768: warning: Excess function parameter 'tidtype' description in 'qib_7322_put_tid'
drivers/infiniband/hw/qib/qib_iba7322.c:3806: warning: Function parameter or member 'rcd' not described in 'qib_7322_clear_tids'
drivers/infiniband/hw/qib/qib_iba7322.c:3806: warning: Excess function parameter 'ctxt' description in 'qib_7322_clear_tids'
drivers/infiniband/hw/qib/qib_iba7322.c:3872: warning: Function parameter or member 'kinfo' not described in 'qib_7322_get_base_info'
drivers/infiniband/hw/qib/qib_iba7322.c:3872: warning: Excess function parameter 'kbase' description in 'qib_7322_get_base_info'
drivers/infiniband/hw/qib/qib_iba7322.c:4730: warning: Function parameter or member 'reg' not described in 'qib_portcntr_7322'
drivers/infiniband/hw/qib/qib_iba7322.c:4730: warning: Excess function parameter 'creg' description in 'qib_portcntr_7322'
drivers/infiniband/hw/qib/qib_iba7322.c:5109: warning: Function parameter or member 't' not described in 'qib_get_7322_faststats'
drivers/infiniband/hw/qib/qib_iba7322.c:7189: warning: Function parameter or member 'pdev' not described in 'qib_init_iba7322_funcs'
drivers/infiniband/hw/qib/qib_iba7322.c:7189: warning: Excess function parameter 'dev' description in 'qib_init_iba7322_funcs'
Link: https://lore.kernel.org/r/20210121094519.2044049-28-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/mr.c:380: warning: Function parameter or member 'virt_addr' not described in 'rvt_reg_user_mr'
drivers/infiniband/sw/rdmavt/mr.c:449: warning: Function parameter or member 'qp' not described in 'rvt_dereg_clean_qp_cb'
drivers/infiniband/sw/rdmavt/mr.c:449: warning: Function parameter or member 'v' not described in 'rvt_dereg_clean_qp_cb'
drivers/infiniband/sw/rdmavt/mr.c:466: warning: Function parameter or member 'mr' not described in 'rvt_dereg_clean_qps'
drivers/infiniband/sw/rdmavt/mr.c:484: warning: Function parameter or member 'mr' not described in 'rvt_check_refs'
drivers/infiniband/sw/rdmavt/mr.c:484: warning: Function parameter or member 't' not described in 'rvt_check_refs'
drivers/infiniband/sw/rdmavt/mr.c:513: warning: Function parameter or member 'mr' not described in 'rvt_mr_has_lkey'
drivers/infiniband/sw/rdmavt/mr.c:513: warning: Function parameter or member 'lkey' not described in 'rvt_mr_has_lkey'
drivers/infiniband/sw/rdmavt/mr.c:526: warning: Function parameter or member 'ss' not described in 'rvt_ss_has_lkey'
drivers/infiniband/sw/rdmavt/mr.c:526: warning: Function parameter or member 'lkey' not described in 'rvt_ss_has_lkey'
drivers/infiniband/sw/rdmavt/mr.c:551: warning: Function parameter or member 'udata' not described in 'rvt_dereg_mr'
Link: https://lore.kernel.org/r/20210121094519.2044049-27-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/file_ops.c:1533: warning: Function parameter or member 'arg' not described in 'manage_rcvq'
drivers/infiniband/hw/hfi1/file_ops.c:1533: warning: Excess function parameter 'start_stop' description in 'manage_rcvq'
Link: https://lore.kernel.org/r/20210121094519.2044049-26-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_iba7220.c:1726: warning: Function parameter or member 'ppd' not described in 'qib_setup_7220_setextled'
drivers/infiniband/hw/qib/qib_iba7220.c:1726: warning: Excess function parameter 'dd' description in 'qib_setup_7220_setextled'
drivers/infiniband/hw/qib/qib_iba7220.c:2154: warning: Function parameter or member 'type' not described in 'qib_7220_put_tid'
drivers/infiniband/hw/qib/qib_iba7220.c:2154: warning: Excess function parameter 'tidtype' description in 'qib_7220_put_tid'
drivers/infiniband/hw/qib/qib_iba7220.c:2192: warning: Function parameter or member 'rcd' not described in 'qib_7220_clear_tids'
drivers/infiniband/hw/qib/qib_iba7220.c:2192: warning: Excess function parameter 'ctxt' description in 'qib_7220_clear_tids'
drivers/infiniband/hw/qib/qib_iba7220.c:2248: warning: Function parameter or member 'kinfo' not described in 'qib_7220_get_base_info'
drivers/infiniband/hw/qib/qib_iba7220.c:2248: warning: Excess function parameter 'kbase' description in 'qib_7220_get_base_info'
drivers/infiniband/hw/qib/qib_iba7220.c:2903: warning: Function parameter or member 'ppd' not described in 'qib_portcntr_7220'
drivers/infiniband/hw/qib/qib_iba7220.c:2903: warning: Function parameter or member 'reg' not described in 'qib_portcntr_7220'
drivers/infiniband/hw/qib/qib_iba7220.c:2903: warning: Excess function parameter 'dd' description in 'qib_portcntr_7220'
drivers/infiniband/hw/qib/qib_iba7220.c:2903: warning: Excess function parameter 'creg' description in 'qib_portcntr_7220'
drivers/infiniband/hw/qib/qib_iba7220.c:3242: warning: Function parameter or member 't' not described in 'qib_get_7220_faststats'
drivers/infiniband/hw/qib/qib_iba7220.c:4479: warning: Function parameter or member 'pdev' not described in 'qib_init_iba7220_funcs'
drivers/infiniband/hw/qib/qib_iba7220.c:4479: warning: Excess function parameter 'dev' description in 'qib_init_iba7220_funcs'
Link: https://lore.kernel.org/r/20210121094519.2044049-25-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/exp_rcv.c:56: warning: Function parameter or member 'set' not described in 'hfi1_exp_tid_set_init'
drivers/infiniband/hw/hfi1/exp_rcv.c:66: warning: Function parameter or member 'rcd' not described in 'hfi1_exp_tid_group_init'
drivers/infiniband/hw/hfi1/exp_rcv.c:77: warning: Function parameter or member 'rcd' not described in 'hfi1_alloc_ctxt_rcv_groups'
drivers/infiniband/hw/hfi1/exp_rcv.c:114: warning: Function parameter or member 'rcd' not described in 'hfi1_free_ctxt_rcv_groups'
Link: https://lore.kernel.org/r/20210121094519.2044049-24-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/mcast.c:195: warning: Function parameter or member 'rdi' not described in 'rvt_mcast_add'
drivers/infiniband/sw/rdmavt/mcast.c:195: warning: Function parameter or member 'ibp' not described in 'rvt_mcast_add'
Link: https://lore.kernel.org/r/20210121094519.2044049-23-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_user_pages.c:60: warning: Function parameter or member 'hwdev' not described in 'qib_map_page'
drivers/infiniband/hw/qib/qib_user_pages.c:60: warning: Function parameter or member 'page' not described in 'qib_map_page'
drivers/infiniband/hw/qib/qib_user_pages.c:60: warning: Function parameter or member 'daddr' not described in 'qib_map_page'
Link: https://lore.kernel.org/r/20210121094519.2044049-22-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'in' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'in_mad_size' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'out' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'out_mad_size' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'out_mad_pkey_index' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Excess function parameter 'in_mad' description in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Excess function parameter 'out_mad' description in 'rvt_process_mad'
Link: https://lore.kernel.org/r/20210121094519.2044049-21-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_ud.c:231: warning: Function parameter or member 'flags' not described in 'qib_make_ud_req'
Link: https://lore.kernel.org/r/20210121094519.2044049-20-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_uc.c:49: warning: Function parameter or member 'flags' not described in 'qib_make_uc_req'
Link: https://lore.kernel.org/r/20210121094519.2044049-19-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_tx.c:383: warning: Function parameter or member 'rcd' not described in 'qib_chg_pioavailkernel'
Link: https://lore.kernel.org/r/20210121094519.2044049-18-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_twsi.c:175: warning: Function parameter or member 'last' not described in 'rd_byte'
Link: https://lore.kernel.org/r/20210121094519.2044049-17-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/chip.c:1335: warning: Function parameter or member 'dd' not described in 'hfi1_addr_from_offset'
drivers/infiniband/hw/hfi1/chip.c:1335: warning: Function parameter or member 'offset' not described in 'hfi1_addr_from_offset'
drivers/infiniband/hw/hfi1/chip.c:1350: warning: Function parameter or member 'dd' not described in 'read_csr'
drivers/infiniband/hw/hfi1/chip.c:1350: warning: Function parameter or member 'offset' not described in 'read_csr'
drivers/infiniband/hw/hfi1/chip.c:1363: warning: Function parameter or member 'dd' not described in 'write_csr'
drivers/infiniband/hw/hfi1/chip.c:1363: warning: Function parameter or member 'offset' not described in 'write_csr'
drivers/infiniband/hw/hfi1/chip.c:1363: warning: Function parameter or member 'value' not described in 'write_csr'
drivers/infiniband/hw/hfi1/chip.c:1385: warning: Function parameter or member 'dd' not described in 'get_csr_addr'
drivers/infiniband/hw/hfi1/chip.c:1385: warning: Function parameter or member 'offset' not described in 'get_csr_addr'
drivers/infiniband/hw/hfi1/chip.c:8442: warning: Function parameter or member 'rcd' not described in 'receive_interrupt_common'
drivers/infiniband/hw/hfi1/chip.c:8491: warning: Function parameter or member 'napi' not described in 'hfi1_netdev_rx_napi'
drivers/infiniband/hw/hfi1/chip.c:8491: warning: Function parameter or member 'budget' not described in 'hfi1_netdev_rx_napi'
drivers/infiniband/hw/hfi1/chip.c:14221: warning: Function parameter or member 'dd' not described in 'init_qpmap_table'
drivers/infiniband/hw/hfi1/chip.c:14221: warning: Function parameter or member 'first_ctxt' not described in 'init_qpmap_table'
drivers/infiniband/hw/hfi1/chip.c:14221: warning: Function parameter or member 'last_ctxt' not described in 'init_qpmap_table'
drivers/infiniband/hw/hfi1/chip.c:14399: warning: Function parameter or member 'dd' not described in 'init_qos'
drivers/infiniband/hw/hfi1/chip.c:14399: warning: Function parameter or member 'rmt' not described in 'init_qos'
drivers/infiniband/hw/hfi1/chip.c:15032: warning: Function parameter or member 'dd' not described in 'hfi1_init_dd'
drivers/infiniband/hw/hfi1/chip.c:15032: warning: Excess function parameter 'dev' description in 'hfi1_init_dd'
drivers/infiniband/hw/hfi1/chip.c:15032: warning: Excess function parameter 'ent' description in 'hfi1_init_dd'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Function parameter or member 'ppd' not described in 'create_pbc'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Function parameter or member 'srate_mbs' not described in 'create_pbc'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Function parameter or member 'dw_len' not described in 'create_pbc'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Excess function parameter 'srate' description in 'create_pbc'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Excess function parameter 'dwlen' description in 'create_pbc'
Link: https://lore.kernel.org/r/20210121094519.2044049-16-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_rc.c:216: warning: Function parameter or member 'flags' not described in 'qib_make_rc_req'
drivers/infiniband/hw/qib/qib_rc.c:1008: warning: Function parameter or member 'aeth' not described in 'do_rc_ack'
drivers/infiniband/hw/qib/qib_rc.c:1008: warning: Function parameter or member 'val' not described in 'do_rc_ack'
drivers/infiniband/hw/qib/qib_rc.c:1008: warning: Function parameter or member 'rcd' not described in 'do_rc_ack'
drivers/infiniband/hw/qib/qib_rc.c:1274: warning: Function parameter or member 'rcd' not described in 'qib_rc_rcv_resp'
drivers/infiniband/hw/qib/qib_rc.c:1497: warning: Function parameter or member 'rcd' not described in 'qib_rc_rcv_error'
Link: https://lore.kernel.org/r/20210121094519.2044049-15-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/cq.c:381: warning: Function parameter or member 'cqe' not described in 'rvt_resize_cq'
drivers/infiniband/sw/rdmavt/cq.c:381: warning: Function parameter or member 'udata' not described in 'rvt_resize_cq'
Link: https://lore.kernel.org/r/20210121094519.2044049-14-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_qp.c:214: warning: Function parameter or member 'rdi' not described in 'qib_free_all_qps'
drivers/infiniband/hw/qib/qib_qp.c:387: warning: Function parameter or member 'qp' not described in 'qib_check_send_wqe'
drivers/infiniband/hw/qib/qib_qp.c:387: warning: Function parameter or member 'wqe' not described in 'qib_check_send_wqe'
drivers/infiniband/hw/qib/qib_qp.c:387: warning: Function parameter or member 'call_send' not described in 'qib_check_send_wqe'
drivers/infiniband/hw/qib/qib_qp.c:425: warning: Function parameter or member 's' not described in 'qib_qp_iter_print'
drivers/infiniband/hw/qib/qib_qp.c:425: warning: Function parameter or member 'iter' not described in 'qib_qp_iter_print'
Link: https://lore.kernel.org/r/20210121094519.2044049-13-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_pcie.c:190: warning: Function parameter or member 'dd' not described in 'qib_cache_msi_info'
drivers/infiniband/hw/qib/qib_pcie.c:190: warning: Function parameter or member 'pos' not described in 'qib_cache_msi_info'
Link: https://lore.kernel.org/r/20210121094519.2044049-12-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_intr.c:48: warning: Function parameter or member 'msg' not described in 'qib_format_hwmsg'
drivers/infiniband/hw/qib/qib_intr.c:48: warning: Function parameter or member 'msgl' not described in 'qib_format_hwmsg'
drivers/infiniband/hw/qib/qib_intr.c:48: warning: Function parameter or member 'hwmsg' not described in 'qib_format_hwmsg'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'hwerrs' not described in 'qib_format_hwerrors'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'hwerrmsgs' not described in 'qib_format_hwerrors'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'nhwerrmsgs' not described in 'qib_format_hwerrors'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'msg' not described in 'qib_format_hwerrors'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'msgl' not described in 'qib_format_hwerrors'
Link: https://lore.kernel.org/r/20210121094519.2044049-11-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_mad.c:896: warning: Function parameter or member 'ppd' not described in 'rm_pkey'
drivers/infiniband/hw/qib/qib_mad.c:896: warning: Excess function parameter 'dd' description in 'rm_pkey'
drivers/infiniband/hw/qib/qib_mad.c:926: warning: Function parameter or member 'ppd' not described in 'add_pkey'
drivers/infiniband/hw/qib/qib_mad.c:926: warning: Excess function parameter 'dd' description in 'add_pkey'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Function parameter or member 'in' not described in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Function parameter or member 'out' not described in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Function parameter or member 'out_mad_size' not described in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Function parameter or member 'out_mad_pkey_index' not described in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Excess function parameter 'in_mad' description in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Excess function parameter 'out_mad' description in 'qib_process_mad'
Link: https://lore.kernel.org/r/20210121094519.2044049-10-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_eeprom.c:55: warning: Function parameter or member 'buff' not described in 'qib_eeprom_read'
drivers/infiniband/hw/qib/qib_eeprom.c:55: warning: Excess function parameter 'buffer' description in 'qib_eeprom_read'
drivers/infiniband/hw/qib/qib_eeprom.c:102: warning: Function parameter or member 'buff' not described in 'qib_eeprom_write'
drivers/infiniband/hw/qib/qib_eeprom.c:102: warning: Excess function parameter 'buffer' description in 'qib_eeprom_write'
Link: https://lore.kernel.org/r/20210121094519.2044049-9-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/vt.c:300: warning: Function parameter or member 'context' not described in 'rvt_dealloc_ucontext'
Link: https://lore.kernel.org/r/20210121094519.2044049-8-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_driver.c:165: warning: Function parameter or member 'ppd' not described in 'qib_wait_linkstate'
drivers/infiniband/hw/qib/qib_driver.c:165: warning: Excess function parameter 'dd' description in 'qib_wait_linkstate'
Link: https://lore.kernel.org/r/20210121094519.2044049-7-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Intel <ibsupport@intel.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hns/hns_roce_mr.c:1003: warning: Function parameter or member 'hr_dev' not described in 'hns_roce_mtr_create'
Link: https://lore.kernel.org/r/20210121094519.2044049-6-lee.jones@linaro.org
Cc: Lijun Ou <oulijun@huawei.com>
Cc: Weihang Li <liweihang@huawei.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1398: warning: Function parameter or member 'dereset' not described in 'hns_roce_v1_reset'
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1398: warning: Excess function parameter 'enable' description in 'hns_roce_v1_reset'
Link: https://lore.kernel.org/r/20210121094519.2044049-5-lee.jones@linaro.org
Cc: Lijun Ou <oulijun@huawei.com>
Cc: Weihang Li <liweihang@huawei.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Wei Hu <xavier.huwei@huawei.com>
Cc: Nenglong Zhao <zhaonenglong@hisilicon.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/efa/efa_com.c:801: warning: Excess function parameter 'note' description in 'efa_com_admin_q_comp_intr_handler'
Link: https://lore.kernel.org/r/20210121094519.2044049-4-lee.jones@linaro.org
Cc: Gal Pressman <galpress@amazon.com>
Cc: Yossi Leybovich <sleybo@amazon.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/mlx5/qp.c:5384: warning: Function parameter or member 'qp' not described in 'mlx5_ib_qp_set_counter'
drivers/infiniband/hw/mlx5/qp.c:5384: warning: Function parameter or member 'counter' not described in 'mlx5_ib_qp_set_counter'
Link: https://lore.kernel.org/r/20210121094519.2044049-3-lee.jones@linaro.org
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'dev' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'pfault' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'wqe' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'wqe_end' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'bytes_mapped' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'total_wqe_bytes' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'receive_queue' not described in 'pagefault_data_segments'
Link: https://lore.kernel.org/r/20210121094519.2044049-2-lee.jones@linaro.org
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An INI QP doesn't require receive CQ, the creation flow sets the recv counts
to zero:
if (cmd->qp_type == IB_QPT_XRC_INI) {
cmd->max_recv_wr = 0;
cmd->max_recv_sge = 0;
The new IOCTL path also does not set the rcq, so make things the same.
Link: https://lore.kernel.org/r/20201216071755.149449-1-yangx.jy@cn.fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement the new driver method 'reg_user_mr_dmabuf'. Utilize the core
functions to import dma-buf based memory region and update the mappings.
Add code to handle dma-buf related page fault.
Link: https://lore.kernel.org/r/1608067636-98073-5-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement a new uverbs ioctl method for memory registration with file
descriptor as an extra parameter.
Link: https://lore.kernel.org/r/1608067636-98073-4-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Dma-buf based memory region requires one extra parameter and is processed
quite differently. Adding a separate method allows clean separation from
regular memory regions.
Link: https://lore.kernel.org/r/1608067636-98073-3-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Dma-buf is a standard cross-driver buffer sharing mechanism that can be
used to support peer-to-peer access from RDMA devices.
Device memory exported via dma-buf is associated with a file descriptor.
This is passed to the user space as a property associated with the buffer
allocation. When the buffer is registered as a memory region, the file
descriptor is passed to the RDMA driver along with other parameters.
Implement the common code for importing dma-buf object and mapping dma-buf
pages.
Link: https://lore.kernel.org/r/1608067636-98073-2-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This reverts commit b2d2440430.
It's true that creating rxe on top of 802.1q interfaces doesn't work.
Thus, commit fd49ddaf7e ("RDMA/rxe: prevent rxe creation on top of vlan
interface") was absolutely correct.
But b2d2440430 was incorrect assuming that with this change, RDMA and
VLAN don't work togehter at all. It just has to be set up
differently. Rather than creating rxe on top of the VLAN interface, rxe
must be created on top of the physical interface. RDMA then works just
fine through VLAN interfaces on top of that physical interface, via the
"upper device" logic.
This is hard to see in the rxe logic because it never talks about vlan,
but instead rxe carefully selects upper vlan netdevices when working with
packets which in turn imply certain vlan tagging. This is all done
correctly and interacts with the gid table with VLAN support the same as
real HW does.
b2d2440430 broke this setup deliberately and should thus be
reverted. Also, b2d2440430 removed rxe_dma_device(), so adapt the revert
to discard that hunk.
Fixes: b2d2440430 ("RDMA/rxe: Remove VLAN code leftovers from RXE")
Link: https://lore.kernel.org/r/20210120161913.7347-1-mwilck@suse.com
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/iwpm_msg.c:402: warning: Function parameter or member 'skb' not described in 'iwpm_register_pid_cb'
drivers/infiniband/core/iwpm_msg.c:475: warning: Function parameter or member 'skb' not described in 'iwpm_add_mapping_cb'
drivers/infiniband/core/iwpm_msg.c:553: warning: Function parameter or member 'skb' not described in 'iwpm_add_and_query_mapping_cb'
drivers/infiniband/core/iwpm_msg.c:636: warning: Function parameter or member 'skb' not described in 'iwpm_remote_info_cb'
drivers/infiniband/core/iwpm_msg.c:716: warning: Function parameter or member 'skb' not described in 'iwpm_mapping_info_cb'
drivers/infiniband/core/iwpm_msg.c:773: warning: Function parameter or member 'skb' not described in 'iwpm_ack_mapping_info_cb'
drivers/infiniband/core/iwpm_msg.c:803: warning: Function parameter or member 'skb' not described in 'iwpm_mapping_error_cb'
drivers/infiniband/core/iwpm_msg.c:851: warning: Function parameter or member 'skb' not described in 'iwpm_hello_cb'
Link: https://lore.kernel.org/r/20210118223929.512175-21-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/iwpm_util.c:138: warning: Function parameter or member 'local_sockaddr' not described in 'iwpm_create_mapinfo'
drivers/infiniband/core/iwpm_util.c:138: warning: Function parameter or member 'mapped_sockaddr' not described in 'iwpm_create_mapinfo'
drivers/infiniband/core/iwpm_util.c:138: warning: Excess function parameter 'local_addr' description in 'iwpm_create_mapinfo'
drivers/infiniband/core/iwpm_util.c:138: warning: Excess function parameter 'mapped_addr' description in 'iwpm_create_mapinfo'
drivers/infiniband/core/iwpm_util.c:185: warning: Function parameter or member 'local_sockaddr' not described in 'iwpm_remove_mapinfo'
drivers/infiniband/core/iwpm_util.c:185: warning: Excess function parameter 'local_addr' description in 'iwpm_remove_mapinfo'
Link: https://lore.kernel.org/r/20210118223929.512175-20-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/counters.c:36: warning: Function parameter or member 'dev' not described in 'rdma_counter_set_auto_mode'
drivers/infiniband/core/counters.c:36: warning: Function parameter or member 'port' not described in 'rdma_counter_set_auto_mode'
drivers/infiniband/core/counters.c:36: warning: Function parameter or member 'on' not described in 'rdma_counter_set_auto_mode'
drivers/infiniband/core/counters.c:36: warning: Function parameter or member 'mask' not described in 'rdma_counter_set_auto_mode'
drivers/infiniband/core/counters.c:238: warning: Function parameter or member 'qp' not described in 'rdma_get_counter_auto_mode'
drivers/infiniband/core/counters.c:238: warning: Function parameter or member 'port' not described in 'rdma_get_counter_auto_mode'
drivers/infiniband/core/counters.c:282: warning: Function parameter or member 'qp' not described in 'rdma_counter_bind_qp_auto'
drivers/infiniband/core/counters.c:282: warning: Function parameter or member 'port' not described in 'rdma_counter_bind_qp_auto'
drivers/infiniband/core/counters.c:320: warning: Function parameter or member 'qp' not described in 'rdma_counter_unbind_qp'
drivers/infiniband/core/counters.c:388: warning: Function parameter or member 'dev' not described in 'rdma_counter_get_hwstat_value'
drivers/infiniband/core/counters.c:388: warning: Function parameter or member 'port' not described in 'rdma_counter_get_hwstat_value'
drivers/infiniband/core/counters.c:388: warning: Function parameter or member 'index' not described in 'rdma_counter_get_hwstat_value'
drivers/infiniband/core/counters.c:444: warning: Function parameter or member 'dev' not described in 'rdma_counter_bind_qpn'
drivers/infiniband/core/counters.c:444: warning: Function parameter or member 'port' not described in 'rdma_counter_bind_qpn'
drivers/infiniband/core/counters.c:444: warning: Function parameter or member 'qp_num' not described in 'rdma_counter_bind_qpn'
drivers/infiniband/core/counters.c:444: warning: Function parameter or member 'counter_id' not described in 'rdma_counter_bind_qpn'
drivers/infiniband/core/counters.c:494: warning: Function parameter or member 'dev' not described in 'rdma_counter_bind_qpn_alloc'
drivers/infiniband/core/counters.c:494: warning: Function parameter or member 'port' not described in 'rdma_counter_bind_qpn_alloc'
drivers/infiniband/core/counters.c:494: warning: Function parameter or member 'qp_num' not described in 'rdma_counter_bind_qpn_alloc'
drivers/infiniband/core/counters.c:494: warning: Function parameter or member 'counter_id' not described in 'rdma_counter_bind_qpn_alloc'
drivers/infiniband/core/counters.c:541: warning: Function parameter or member 'dev' not described in 'rdma_counter_unbind_qpn'
drivers/infiniband/core/counters.c:541: warning: Function parameter or member 'port' not described in 'rdma_counter_unbind_qpn'
drivers/infiniband/core/counters.c:541: warning: Function parameter or member 'qp_num' not described in 'rdma_counter_unbind_qpn'
drivers/infiniband/core/counters.c:541: warning: Function parameter or member 'counter_id' not described in 'rdma_counter_unbind_qpn'
Link: https://lore.kernel.org/r/20210118223929.512175-19-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_verbs.c:273: warning: Excess function parameter 'iwdev' description in 'i40iw_free_qp_resources'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:273: warning: Excess function parameter 'qp_num' description in 'i40iw_free_qp_resources'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:307: warning: Function parameter or member 'udata' not described in 'i40iw_destroy_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Function parameter or member 'iwdev' not described in 'i40iw_setup_virt_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Function parameter or member 'iwqp' not described in 'i40iw_setup_virt_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Excess function parameter 'dev' description in 'i40iw_setup_virt_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Excess function parameter 'qp' description in 'i40iw_setup_virt_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1248: warning: Function parameter or member 'pg_size' not described in 'i40iw_check_mem_contiguous'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1264: warning: Function parameter or member 'pg_size' not described in 'i40iw_check_mr_contiguous'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1539: warning: Function parameter or member 'sg_offset' not described in 'i40iw_map_mr_sg'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1886: warning: Function parameter or member 'udata' not described in 'i40iw_dereg_mr'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1953: warning: Function parameter or member 'dev' not described in 'hw_rev_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1953: warning: Function parameter or member 'attr' not described in 'hw_rev_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1953: warning: Function parameter or member 'buf' not described in 'hw_rev_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1967: warning: Function parameter or member 'dev' not described in 'hca_type_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1967: warning: Function parameter or member 'attr' not described in 'hca_type_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1967: warning: Function parameter or member 'buf' not described in 'hca_type_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1977: warning: Function parameter or member 'dev' not described in 'board_id_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1977: warning: Function parameter or member 'attr' not described in 'board_id_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1977: warning: Function parameter or member 'buf' not described in 'board_id_show'
Link: https://lore.kernel.org/r/20210118223929.512175-18-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/restrack.c:209: warning: Function parameter or member 'res' not described in 'rdma_restrack_new'
drivers/infiniband/core/restrack.c:209: warning: Function parameter or member 'type' not described in 'rdma_restrack_new'
Link: https://lore.kernel.org/r/20210118223929.512175-17-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_utils.c:66: warning: Function parameter or member 'ipv4' not described in 'i40iw_arp_table'
drivers/infiniband/hw/i40iw/i40iw_utils.c:148: warning: Function parameter or member 'notifier' not described in 'i40iw_inetaddr_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:148: warning: Excess function parameter 'notfier' description in 'i40iw_inetaddr_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:224: warning: Function parameter or member 'notifier' not described in 'i40iw_inet6addr_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:224: warning: Excess function parameter 'notfier' description in 'i40iw_inet6addr_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:273: warning: Function parameter or member 'notifier' not described in 'i40iw_net_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:273: warning: Excess function parameter 'notfier' description in 'i40iw_net_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:320: warning: Function parameter or member 'notifier' not described in 'i40iw_netdevice_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:320: warning: Excess function parameter 'notfier' description in 'i40iw_netdevice_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:663: warning: Function parameter or member 'desc' not described in 'i40iw_debug_buf'
drivers/infiniband/hw/i40iw/i40iw_utils.c:792: warning: Function parameter or member 'sdinfo' not described in 'i40iw_cqp_sds_cmd'
drivers/infiniband/hw/i40iw/i40iw_utils.c:792: warning: Excess function parameter 'sd_info' description in 'i40iw_cqp_sds_cmd'
drivers/infiniband/hw/i40iw/i40iw_utils.c:895: warning: Function parameter or member 't' not described in 'i40iw_terminate_timeout'
drivers/infiniband/hw/i40iw/i40iw_utils.c:895: warning: Excess function parameter 'context' description in 'i40iw_terminate_timeout'
drivers/infiniband/hw/i40iw/i40iw_utils.c:953: warning: Function parameter or member 'dev' not described in 'i40iw_cqp_spawn_worker'
drivers/infiniband/hw/i40iw/i40iw_utils.c:953: warning: Excess function parameter 'iwdev' description in 'i40iw_cqp_spawn_worker'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1058: warning: Function parameter or member 'dev' not described in 'i40iw_cqp_query_fpm_values_cmd'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1058: warning: Excess function parameter 'iwdev' description in 'i40iw_cqp_query_fpm_values_cmd'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1120: warning: Function parameter or member 'dev' not described in 'i40iw_vf_wait_vchnl_resp'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1120: warning: Excess function parameter 'iwdev' description in 'i40iw_vf_wait_vchnl_resp'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1467: warning: Function parameter or member 't' not described in 'i40iw_hw_stats_timeout'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1467: warning: Excess function parameter 'vsi' description in 'i40iw_hw_stats_timeout'
Link: https://lore.kernel.org/r/20210118223929.512175-16-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:132: warning: Function parameter or member 'rsrc_type' not described in 'vchnl_vf_send_add_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:132: warning: Function parameter or member 'start_index' not described in 'vchnl_vf_send_add_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:132: warning: Function parameter or member 'rsrc_count' not described in 'vchnl_vf_send_add_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:170: warning: Function parameter or member 'rsrc_type' not described in 'vchnl_vf_send_del_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:170: warning: Function parameter or member 'start_index' not described in 'vchnl_vf_send_del_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:170: warning: Function parameter or member 'rsrc_count' not described in 'vchnl_vf_send_del_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:230: warning: Function parameter or member 'hmc_fcn' not described in 'vchnl_pf_send_get_hmc_fcn_resp'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:283: warning: Function parameter or member 'op_ret_code' not described in 'vchnl_pf_send_error_resp'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Function parameter or member 'dev' not described in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Function parameter or member 'callback_param' not described in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Function parameter or member 'cqe_info' not described in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Excess function parameter 'cqp_req_param' description in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Excess function parameter 'not_used' description in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:337: warning: Function parameter or member 'work_vf_dev' not described in 'pf_add_hmc_obj_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:337: warning: Excess function parameter 'vf_dev' description in 'pf_add_hmc_obj_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:412: warning: Function parameter or member 'dev' not described in 'i40iw_vf_init_pestat'
Link: https://lore.kernel.org/r/20210118223929.512175-15-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_uk.c:129: warning: Function parameter or member 'total_size' not described in 'i40iw_qp_get_next_send_wqe'
drivers/infiniband/hw/i40iw/i40iw_uk.c:129: warning: Function parameter or member 'wr_id' not described in 'i40iw_qp_get_next_send_wqe'
drivers/infiniband/hw/i40iw/i40iw_uk.c:724: warning: Excess function parameter 'post_cq' description in 'i40iw_cq_poll_completion'
drivers/infiniband/hw/i40iw/i40iw_uk.c:1058: warning: Function parameter or member 'queue' not described in 'i40iw_clean_cq'
Link: https://lore.kernel.org/r/20210118223929.512175-14-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'client' not described in 'opa_pr_query_possible'
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'sa_dev' not described in 'opa_pr_query_possible'
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'device' not described in 'opa_pr_query_possible'
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'port_num' not described in 'opa_pr_query_possible'
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'rec' not described in 'opa_pr_query_possible'
Link: https://lore.kernel.org/r/20210118223929.512175-13-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
