mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 00:21:59 +00:00
6924565a04
6264 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Wei Li
|
2a13ca2e8a |
tracing/hwlat: Fix a race during cpuhp processing
The cpuhp online/offline processing race also exists in percpu-mode hwlat
tracer in theory, apply the fix too. That is:
T1 | T2
[CPUHP_ONLINE] | cpu_device_down()
hwlat_hotplug_workfn() |
| cpus_write_lock()
| takedown_cpu(1)
| cpus_write_unlock()
[CPUHP_OFFLINE] |
cpus_read_lock() |
start_kthread(1) |
cpus_read_unlock() |
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-5-liwei391@huawei.com
Fixes:
|
||
|
Wei Li
|
829e0c9f08 |
tracing/timerlat: Fix a race during cpuhp processing
There is another found exception that the "timerlat/1" thread was
scheduled on CPU0, and lead to timer corruption finally:
```
ODEBUG: init active (active state 0) object: ffff888237c2e108 object type: hrtimer hint: timerlat_irq+0x0/0x220
WARNING: CPU: 0 PID: 426 at lib/debugobjects.c:518 debug_print_object+0x7d/0xb0
Modules linked in:
CPU: 0 UID: 0 PID: 426 Comm: timerlat/1 Not tainted 6.11.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:debug_print_object+0x7d/0xb0
...
Call Trace:
<TASK>
? __warn+0x7c/0x110
? debug_print_object+0x7d/0xb0
? report_bug+0xf1/0x1d0
? prb_read_valid+0x17/0x20
? handle_bug+0x3f/0x70
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? debug_print_object+0x7d/0xb0
? debug_print_object+0x7d/0xb0
? __pfx_timerlat_irq+0x10/0x10
__debug_object_init+0x110/0x150
hrtimer_init+0x1d/0x60
timerlat_main+0xab/0x2d0
? __pfx_timerlat_main+0x10/0x10
kthread+0xb7/0xe0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
```
After tracing the scheduling event, it was discovered that the migration
of the "timerlat/1" thread was performed during thread creation. Further
analysis confirmed that it is because the CPU online processing for
osnoise is implemented through workers, which is asynchronous with the
offline processing. When the worker was scheduled to create a thread, the
CPU may has already been removed from the cpu_online_mask during the offline
process, resulting in the inability to select the right CPU:
T1 | T2
[CPUHP_ONLINE] | cpu_device_down()
osnoise_hotplug_workfn() |
| cpus_write_lock()
| takedown_cpu(1)
| cpus_write_unlock()
[CPUHP_OFFLINE] |
cpus_read_lock() |
start_kthread(1) |
cpus_read_unlock() |
To fix this, skip online processing if the CPU is already offline.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-4-liwei391@huawei.com
Fixes:
|
||
|
Wei Li
|
b484a02c9c |
tracing/timerlat: Drop interface_lock in stop_kthread()
stop_kthread() is the offline callback for "trace/osnoise:online", since commit |
||
|
Wei Li
|
0bb0a5c12e |
tracing/timerlat: Fix duplicated kthread creation due to CPU online/offline
osnoise_hotplug_workfn() is the asynchronous online callback for
"trace/osnoise:online". It may be congested when a CPU goes online and
offline repeatedly and is invoked for multiple times after a certain
online.
This will lead to kthread leak and timer corruption. Add a check
in start_kthread() to prevent this situation.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-2-liwei391@huawei.com
Fixes:
|
||
Steven Rostedt
|
50a3242d84 |
tracing: Fix trace_check_vprintf() when tp_printk is used
When the tp_printk kernel command line is used, the trace events go
directly to printk(). It is still checked via the trace_check_vprintf()
function to make sure the pointers of the trace event are legit.
The addition of reading buffers from previous boots required adding a
delta between the addresses of the previous boot and the current boot so
that the pointers in the old buffer can still be used. But this required
adding a trace_array pointer to acquire the delta offsets.
The tp_printk code does not provide a trace_array (tr) pointer, so when
the offsets were examined, a NULL pointer dereference happened and the
kernel crashed.
If the trace_array does not exist, just default the delta offsets to zero,
as that also means the trace event is not being read from a previous boot.
Link: https://lore.kernel.org/all/Zv3z5UsG_jsO9_Tb@aschofie-mobl2.lan/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241003104925.4e1b1fd9@gandalf.local.home
Fixes:
|
||
Al Viro
|
cb787f4ac0 |
[tree-wide] finally take no_llseek out
no_llseek had been defined to NULL two years ago, in commit
|
||
Linus Torvalds
|
5159938e10 |
Probes updates for v6.12:
- uprobes: make trace_uprobe->nhit counter a per-CPU one
This makes uprobe event's hit counter per-CPU for improving
scalability on multi-core environment.
- kprobes: Remove obsoleted declaration for init_test_probes
Remove unused init_test_probes() from header.
- Raw tracepoint probe supports raw tracepoint events on modules.
The tracepoint events using fprobe were introduced in v6.5, but
tracepoints can be compiled in modules. This supports such a case.
This includes the following improvements.
. tracepoint: add a function for iterating over all tracepoints in
all modules.
. tracepoint: Add a function for iterating over tracepoints in a
module.
. tracing/fprobe: Support raw tracepoint events on modules.
. tracing/fprobe: Support raw tracepoints on future loaded modules.
This allows user to add tracepoint events on modules which is
not loaded yet.
. selftests/tracing: Add a test for tracepoint events on modules.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmb0HXgACgkQ2/sHvwUr
Pxs7AAf+K89Q7eyqKLP/oG5LGsnmWwhZHP26HTbGKh7mRaxGE+cf3l1O2lCMAgBt
0Y1J0sHkgRSnubmlPrgEMKKLOKVBwnvwBqbqO8Zw8L3GxMegG5YYsl3Y60Q0T6Gq
xiL17sHILbb/yefUqnf6C3QHoSjR4aTMEaQSpux1tsCqG/sLeU7V6DZrWdM5t4Fl
CvQDuy//UdQUKFTUC5XOc6lRbKr94ktp/VTxdHZLXa5u6p/slq8ISf9EA+Rrsjkp
m+FtW8MpfcYt3K+hs0kV58F43XWeRt9F7OlLf+MlyCeRRQor4xvkVlV0iw6VcRG9
sXt6ml6AmyA2JWRzR5qSKYvMAsNVyA==
=GYlS
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- uprobes: make trace_uprobe->nhit counter a per-CPU one
This makes uprobe event's hit counter per-CPU for improving
scalability on multi-core environment
- kprobes: Remove obsoleted declaration for init_test_probes
Remove unused init_test_probes() from header
- Raw tracepoint probe supports raw tracepoint events on modules:
- add a function for iterating over all tracepoints in all modules
- add a function for iterating over tracepoints in a module
- support raw tracepoint events on modules
- support raw tracepoints on future loaded modules
- add a test for tracepoint events on modules"
* tag 'probes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
sefltests/tracing: Add a test for tracepoint events on modules
tracing/fprobe: Support raw tracepoints on future loaded modules
tracing/fprobe: Support raw tracepoint events on modules
tracepoint: Support iterating tracepoints in a loading module
tracepoint: Support iterating over tracepoints on modules
kprobes: Remove obsoleted declaration for init_test_probes
uprobes: turn trace_uprobe's nhit counter to be per-CPU one
|
||
Masami Hiramatsu (Google)
|
57a7e6de9e |
tracing/fprobe: Support raw tracepoints on future loaded modules
Support raw tracepoint events on future loaded (unloaded) modules. This allows user to create raw tracepoint events which can be used from module's __init functions. Note: since the kernel does not have any information about the tracepoints in the unloaded modules, fprobe events can not check whether the tracepoint exists nor extend the BTF based arguments. Link: https://lore.kernel.org/all/172397780593.286558.18360375226968537828.stgit@devnote2/ Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
|
Masami Hiramatsu (Google)
|
67e9a9ee47 |
tracing/fprobe: Support raw tracepoint events on modules
Support raw tracepoint event on module by fprobe events. Since it only uses for_each_kernel_tracepoint() to find a tracepoint, the tracepoints on modules are not handled. Thus if user specified a tracepoint on a module, it shows an error. This adds new for_each_module_tracepoint() API to tracepoint subsystem, and uses it to find tracepoints on modules. Link: https://lore.kernel.org/all/172397779651.286558.15903703620679186867.stgit@devnote2/ Reported-by: don <zds100@gmail.com> Closes: https://lore.kernel.org/all/20240530215718.aeec973a1d0bf058d39cb1e3@kernel.org/ Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
Andrii Nakryiko
|
10cdb82aa7 |
uprobes: turn trace_uprobe's nhit counter to be per-CPU one
trace_uprobe->nhit counter is not incremented atomically, so its value is questionable in when uprobe is hit on multiple CPUs simultaneously. Also, doing this shared counter increment across many CPUs causes heavy cache line bouncing, limiting uprobe/uretprobe performance scaling with number of CPUs. Solve both problems by making this a per-CPU counter. Link: https://lore.kernel.org/all/20240813203409.3985398-1-andrii@kernel.org/ Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
|
Linus Torvalds
|
af9c191ac2 |
ring-buffer: Updates for v6.12:
- Merged v6.11-rc3 into trace/ring-buffer/core
The v6.10 ring buffer pull request was not made due to Mathieu Desnoyers
making a comment to the pull request. Mathieu and I resolved it on IRC,
but we did not let Linus know that it was resolved. Linus did not do the
pull thinking it still had some unresolved issues.
The ring buffer work for 6.12 was dependent on both this pull request as
well as the reserve_mem kernel command line option that was going upstream
through the memory management tree. The ring buffer repo was being used by
others so it could not be rebased. In order to continue the work, the
v6.11-rc3 branch was pulled in to get access to the reserve_mem work.
This has the 6.11 pull request that did not make it into 6.11, which was:
tracing/ring-buffer: Have persistent buffer across reboots
This allows for the tracing instance ring buffer to stay persistent across
reboots. The way this is done is by adding to the kernel command line:
trace_instance=boot_map@0x285400000:12M
This will reserve 12 megabytes at the address 0x285400000, and then map
the tracing instance "boot_map" ring buffer to that memory. This will
appear as a normal instance in the tracefs system:
/sys/kernel/tracing/instances/boot_map
A user could enable tracing in that instance, and on reboot or kernel
crash, if the memory is not wiped by the firmware, it will recreate the
trace in that instance. For example, if one was debugging a shutdown of a
kernel reboot:
# cd /sys/kernel/tracing
# echo function > instances/boot_map/current_tracer
# reboot
[..]
# cd /sys/kernel/tracing
# tail instances/boot_map/trace
swapper/0-1 [000] d..1. 164.549800: restore_boot_irq_mode <-native_machine_shutdown
swapper/0-1 [000] d..1. 164.549801: native_restore_boot_irq_mode <-native_machine_shutdown
swapper/0-1 [000] d..1. 164.549802: disconnect_bsp_APIC <-native_machine_shutdown
swapper/0-1 [000] d..1. 164.549811: hpet_disable <-native_machine_shutdown
swapper/0-1 [000] d..1. 164.549812: iommu_shutdown_noop <-native_machine_restart
swapper/0-1 [000] d..1. 164.549813: native_machine_emergency_restart <-__do_sys_reboot
swapper/0-1 [000] d..1. 164.549813: tboot_shutdown <-native_machine_emergency_restart
swapper/0-1 [000] d..1. 164.549820: acpi_reboot <-native_machine_emergency_restart
swapper/0-1 [000] d..1. 164.549821: acpi_reset <-acpi_reboot
swapper/0-1 [000] d..1. 164.549822: acpi_os_write_port <-acpi_reboot
On reboot, the buffer is examined to make sure it is valid. The validation
check even steps through every event to make sure the meta data of the
event is correct. If any test fails, it will simply reset the buffer, and
the buffer will be empty on boot.
The new changes for 6.12 are:
- Allow the tracing persistent boot buffer to use the "reserve_mem" option
Instead of having the admin find a physical address to store the persistent
buffer, which can be very tedious if they have to administrate several
different machines, allow them to use the "reserve_mem" option that will
find a location for them. It is not as reliable because of KASLR, as the
loading of the kernel in different locations can cause the memory
allocated to be inconsistent. Booting with "nokaslr" can make reserve_mem
more reliable.
- Have function graph tracer handle offsets from a previous boot.
The ring buffer output from a previous boot may have different addresses
due to kaslr. Have the function graph tracer handle these by using the
delta from the previous boot to the new boot address space.
- Only reset the saved meta offset when the buffer is started or reset
In the persistent memory meta data, it holds the previous address space
information, so that it can calculate the delta to have function tracing
work. But this gets updated after being read to hold the new address
space. But if the buffer isn't used for that boot, on reboot, the delta is
now calculated from the previous boot and not the boot that holds the data
in the ring buffer. This causes the functions not to be shown. Do not save
the address space information of the current kernel until it is being
recorded.
- Add a magic variable to test the valid meta data
Add a magic variable in the meta data that can also be used for
validation. The validator of the previous buffer doesn't need this magic
data, but it can be used if the meta data is changed by a new kernel, which
may have the same format that passes the validator but is used
differently. This magic number can also be used as a "versioning" of the
meta data.
- Align user space mapped ring buffer sub buffers to improve TLB entries
Linus mentioned that the mapped ring buffer sub buffers were misaligned
between the meta page and the sub-buffers, so that if the sub-buffers were
bigger than PAGE_SIZE, it wouldn't allow the TLB to use bigger entries.
- Add new kernel command line "traceoff" to disable tracing on boot for instances
If tracing is enabled for a boot instance, there needs a way to be able to
disable it on boot so that new events do not get entered into the ring
buffer and be mixed with events from a previous boot, as that can be
confusing.
- Allow trace_printk() to go to other instances
Currently, trace_printk() can only go to the top level instance. When
debugging with a persistent buffer, it is really useful to be able to add
trace_printk() to go to that buffer, so that you have access to them after
a crash.
- Do not use "bin_printk()" for traces to a boot instance
The bin_printk() saves only a pointer to the printk format in the ring
buffer, as the reader of the buffer can still have access to it. But this
is not the case if the buffer is from a previous boot. If the
trace_printk() is going to a "persistent" buffer, it will use the slower
version that writes the printk format into the buffer.
- Add command line option to allow trace_printk() to go to an instance
Allow the kernel command line to define which instance the trace_printk()
goes to, instead of forcing the admin to set it for every boot via the
tracefs options.
- Start a document that explains how to use tracefs to debug the kernel
- Add some more kernel selftests to test user mapped ring buffer
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZu/PxxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qowiAQCx86Nm48aCACjrvGWCFb+jgQZn8QdO
MeK15Fcc5C3b5gEAkJkDKqtul7ybI9+vq+3yNzdl7pO7Y7+pCNzz3PfVaQA=
=Ce81
-----END PGP SIGNATURE-----
Merge tag 'trace-ring-buffer-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- tracing/ring-buffer: persistent buffer across reboots
This allows for the tracing instance ring buffer to stay persistent
across reboots. The way this is done is by adding to the kernel
command line:
trace_instance=boot_map@0x285400000:12M
This will reserve 12 megabytes at the address 0x285400000, and then
map the tracing instance "boot_map" ring buffer to that memory. This
will appear as a normal instance in the tracefs system:
/sys/kernel/tracing/instances/boot_map
A user could enable tracing in that instance, and on reboot or kernel
crash, if the memory is not wiped by the firmware, it will recreate
the trace in that instance. For example, if one was debugging a
shutdown of a kernel reboot:
# cd /sys/kernel/tracing
# echo function > instances/boot_map/current_tracer
# reboot
[..]
# cd /sys/kernel/tracing
# tail instances/boot_map/trace
swapper/0-1 [000] d..1. 164.549800: restore_boot_irq_mode <-native_machine_shutdown
swapper/0-1 [000] d..1. 164.549801: native_restore_boot_irq_mode <-native_machine_shutdown
swapper/0-1 [000] d..1. 164.549802: disconnect_bsp_APIC <-native_machine_shutdown
swapper/0-1 [000] d..1. 164.549811: hpet_disable <-native_machine_shutdown
swapper/0-1 [000] d..1. 164.549812: iommu_shutdown_noop <-native_machine_restart
swapper/0-1 [000] d..1. 164.549813: native_machine_emergency_restart <-__do_sys_reboot
swapper/0-1 [000] d..1. 164.549813: tboot_shutdown <-native_machine_emergency_restart
swapper/0-1 [000] d..1. 164.549820: acpi_reboot <-native_machine_emergency_restart
swapper/0-1 [000] d..1. 164.549821: acpi_reset <-acpi_reboot
swapper/0-1 [000] d..1. 164.549822: acpi_os_write_port <-acpi_reboot
On reboot, the buffer is examined to make sure it is valid. The
validation check even steps through every event to make sure the meta
data of the event is correct. If any test fails, it will simply reset
the buffer, and the buffer will be empty on boot.
- Allow the tracing persistent boot buffer to use the "reserve_mem"
option
Instead of having the admin find a physical address to store the
persistent buffer, which can be very tedious if they have to
administrate several different machines, allow them to use the
"reserve_mem" option that will find a location for them. It is not as
reliable because of KASLR, as the loading of the kernel in different
locations can cause the memory allocated to be inconsistent. Booting
with "nokaslr" can make reserve_mem more reliable.
- Have function graph tracer handle offsets from a previous boot.
The ring buffer output from a previous boot may have different
addresses due to kaslr. Have the function graph tracer handle these
by using the delta from the previous boot to the new boot address
space.
- Only reset the saved meta offset when the buffer is started or reset
In the persistent memory meta data, it holds the previous address
space information, so that it can calculate the delta to have
function tracing work. But this gets updated after being read to hold
the new address space. But if the buffer isn't used for that boot, on
reboot, the delta is now calculated from the previous boot and not
the boot that holds the data in the ring buffer. This causes the
functions not to be shown. Do not save the address space information
of the current kernel until it is being recorded.
- Add a magic variable to test the valid meta data
Add a magic variable in the meta data that can also be used for
validation. The validator of the previous buffer doesn't need this
magic data, but it can be used if the meta data is changed by a new
kernel, which may have the same format that passes the validator but
is used differently. This magic number can also be used as a
"versioning" of the meta data.
- Align user space mapped ring buffer sub buffers to improve TLB
entries
Linus mentioned that the mapped ring buffer sub buffers were
misaligned between the meta page and the sub-buffers, so that if the
sub-buffers were bigger than PAGE_SIZE, it wouldn't allow the TLB to
use bigger entries.
- Add new kernel command line "traceoff" to disable tracing on boot for
instances
If tracing is enabled for a boot instance, there needs a way to be
able to disable it on boot so that new events do not get entered into
the ring buffer and be mixed with events from a previous boot, as
that can be confusing.
- Allow trace_printk() to go to other instances
Currently, trace_printk() can only go to the top level instance. When
debugging with a persistent buffer, it is really useful to be able to
add trace_printk() to go to that buffer, so that you have access to
them after a crash.
- Do not use "bin_printk()" for traces to a boot instance
The bin_printk() saves only a pointer to the printk format in the
ring buffer, as the reader of the buffer can still have access to it.
But this is not the case if the buffer is from a previous boot. If
the trace_printk() is going to a "persistent" buffer, it will use the
slower version that writes the printk format into the buffer.
- Add command line option to allow trace_printk() to go to an instance
Allow the kernel command line to define which instance the
trace_printk() goes to, instead of forcing the admin to set it for
every boot via the tracefs options.
- Start a document that explains how to use tracefs to debug the kernel
- Add some more kernel selftests to test user mapped ring buffer
* tag 'trace-ring-buffer-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (28 commits)
selftests/ring-buffer: Handle meta-page bigger than the system
selftests/ring-buffer: Verify the entire meta-page padding
tracing/Documentation: Start a document on how to debug with tracing
tracing: Add option to set an instance to be the trace_printk destination
tracing: Have trace_printk not use binary prints if boot buffer
tracing: Allow trace_printk() to go to other instance buffers
tracing: Add "traceoff" flag to boot time tracing instances
ring-buffer: Align meta-page to sub-buffers for improved TLB usage
ring-buffer: Add magic and struct size to boot up meta data
ring-buffer: Don't reset persistent ring-buffer meta saved addresses
tracing/fgraph: Have fgraph handle previous boot function addresses
tracing: Allow boot instances to use reserve_mem boot memory
tracing: Fix ifdef of snapshots to not prevent last_boot_info file
ring-buffer: Use vma_pages() helper function
tracing: Fix NULL vs IS_ERR() check in enable_instances()
tracing: Add last boot delta offset for stack traces
tracing: Update function tracing output for previous boot buffer
tracing: Handle old buffer mappings for event strings and functions
tracing/ring-buffer: Add last_boot_info file to boot instance
ring-buffer: Save text and data locations in mapped meta data
...
|
||
|
Linus Torvalds
|
440b652328 |
bpf-next-6.12
-----BEGIN PGP SIGNATURE-----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=MDwh
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Introduce '__attribute__((bpf_fastcall))' for helpers and kfuncs with
corresponding support in LLVM.
It is similar to existing 'no_caller_saved_registers' attribute in
GCC/LLVM with a provision for backward compatibility. It allows
compilers generate more efficient BPF code assuming the verifier or
JITs will inline or partially inline a helper/kfunc with such
attribute. bpf_cast_to_kern_ctx, bpf_rdonly_cast,
bpf_get_smp_processor_id are the first set of such helpers.
- Harden and extend ELF build ID parsing logic.
When called from sleepable context the relevants parts of ELF file
will be read to find and fetch .note.gnu.build-id information. Also
harden the logic to avoid TOCTOU, overflow, out-of-bounds problems.
- Improvements and fixes for sched-ext:
- Allow passing BPF iterators as kfunc arguments
- Make the pointer returned from iter_next method trusted
- Fix x86 JIT convergence issue due to growing/shrinking conditional
jumps in variable length encoding
- BPF_LSM related:
- Introduce few VFS kfuncs and consolidate them in
fs/bpf_fs_kfuncs.c
- Enforce correct range of return values from certain LSM hooks
- Disallow attaching to other LSM hooks
- Prerequisite work for upcoming Qdisc in BPF:
- Allow kptrs in program provided structs
- Support for gen_epilogue in verifier_ops
- Important fixes:
- Fix uprobe multi pid filter check
- Fix bpf_strtol and bpf_strtoul helpers
- Track equal scalars history on per-instruction level
- Fix tailcall hierarchy on x86 and arm64
- Fix signed division overflow to prevent INT_MIN/-1 trap on x86
- Fix get kernel stack in BPF progs attached to tracepoint:syscall
- Selftests:
- Add uprobe bench/stress tool
- Generate file dependencies to drastically improve re-build time
- Match JIT-ed and BPF asm with __xlated/__jited keywords
- Convert older tests to test_progs framework
- Add support for RISC-V
- Few fixes when BPF programs are compiled with GCC-BPF backend
(support for GCC-BPF in BPF CI is ongoing in parallel)
- Add traffic monitor
- Enable cross compile and musl libc
* tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (260 commits)
btf: require pahole 1.21+ for DEBUG_INFO_BTF with default DWARF version
btf: move pahole check in scripts/link-vmlinux.sh to lib/Kconfig.debug
btf: remove redundant CONFIG_BPF test in scripts/link-vmlinux.sh
bpf: Call the missed kfree() when there is no special field in btf
bpf: Call the missed btf_record_free() when map creation fails
selftests/bpf: Add a test case to write mtu result into .rodata
selftests/bpf: Add a test case to write strtol result into .rodata
selftests/bpf: Rename ARG_PTR_TO_LONG test description
selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized test
bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error
bpf: Improve check_raw_mode_ok test for MEM_UNINIT-tagged types
bpf: Fix helper writes to read-only maps
bpf: Remove truncation test in bpf_strtol and bpf_strtoul helpers
bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit
selftests/bpf: Add tests for sdiv/smod overflow cases
bpf: Fix a sdiv overflow issue
libbpf: Add bpf_object__token_fd accessor
docs/bpf: Add missing BPF program types to docs
docs/bpf: Add constant values for linkages
bpf: Use fake pt_regs when doing bpf syscall tracepoint tracing
...
|
||
|
Linus Torvalds
|
2004cef11e |
In the v6.12 scheduler development cycle we had 63 commits from 18 contributors:
- Implement the SCHED_DEADLINE server infrastructure - Daniel Bristot de Oliveira's
last major contribution to the kernel:
"SCHED_DEADLINE servers can help fixing starvation issues of low priority
tasks (e.g., SCHED_OTHER) when higher priority tasks monopolize CPU
cycles. Today we have RT Throttling; DEADLINE servers should be able to
replace and improve that."
(Daniel Bristot de Oliveira, Peter Zijlstra, Joel Fernandes,
Youssef Esmat, Huang Shijie)
- Preparatory changes for sched_ext integration:
- Use set_next_task(.first) where required
- Fix up set_next_task() implementations
- Clean up DL server vs. core sched
- Split up put_prev_task_balance()
- Rework pick_next_task()
- Combine the last put_prev_task() and the first set_next_task()
- Rework dl_server
- Add put_prev_task(.next)
(Peter Zijlstra, with a fix by Tejun Heo)
- Complete the EEVDF transition and refine EEVDF scheduling:
- Implement delayed dequeue
- Allow shorter slices to wakeup-preempt
- Use sched_attr::sched_runtime to set request/slice suggestion
- Document the new feature flags
- Remove unused and duplicate-functionality fields
- Simplify & unify pick_next_task_fair()
- Misc debuggability enhancements
(Peter Zijlstra, with fixes/cleanups by Dietmar Eggemann,
Valentin Schneider and Chuyi Zhou)
- Initialize the vruntime of a new task when it is first enqueued,
resulting in significant decrease in latency of newly woken tasks.
(Zhang Qiao)
- Introduce SM_IDLE and an idle re-entry fast-path in __schedule()
(K Prateek Nayak, Peter Zijlstra)
- Clean up and clarify the usage of Clean up usage of rt_task()
(Qais Yousef)
- Preempt SCHED_IDLE entities in strict cgroup hierarchies
(Tianchen Ding)
- Clarify the documentation of time units for deadline scheduler
parameters. (Christian Loehle)
- Remove the HZ_BW chicken-bit feature flag introduced a year ago,
the original change seems to be working fine.
(Phil Auld)
- Misc fixes and cleanups (Chen Yu, Dan Carpenter, Huang Shijie,
Peilin He, Qais Yousefm and Vincent Guittot)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TEC6
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Implement the SCHED_DEADLINE server infrastructure - Daniel Bristot
de Oliveira's last major contribution to the kernel:
"SCHED_DEADLINE servers can help fixing starvation issues of low
priority tasks (e.g., SCHED_OTHER) when higher priority tasks
monopolize CPU cycles. Today we have RT Throttling; DEADLINE
servers should be able to replace and improve that."
(Daniel Bristot de Oliveira, Peter Zijlstra, Joel Fernandes, Youssef
Esmat, Huang Shijie)
- Preparatory changes for sched_ext integration:
- Use set_next_task(.first) where required
- Fix up set_next_task() implementations
- Clean up DL server vs. core sched
- Split up put_prev_task_balance()
- Rework pick_next_task()
- Combine the last put_prev_task() and the first set_next_task()
- Rework dl_server
- Add put_prev_task(.next)
(Peter Zijlstra, with a fix by Tejun Heo)
- Complete the EEVDF transition and refine EEVDF scheduling:
- Implement delayed dequeue
- Allow shorter slices to wakeup-preempt
- Use sched_attr::sched_runtime to set request/slice suggestion
- Document the new feature flags
- Remove unused and duplicate-functionality fields
- Simplify & unify pick_next_task_fair()
- Misc debuggability enhancements
(Peter Zijlstra, with fixes/cleanups by Dietmar Eggemann, Valentin
Schneider and Chuyi Zhou)
- Initialize the vruntime of a new task when it is first enqueued,
resulting in significant decrease in latency of newly woken tasks
(Zhang Qiao)
- Introduce SM_IDLE and an idle re-entry fast-path in __schedule()
(K Prateek Nayak, Peter Zijlstra)
- Clean up and clarify the usage of Clean up usage of rt_task()
(Qais Yousef)
- Preempt SCHED_IDLE entities in strict cgroup hierarchies
(Tianchen Ding)
- Clarify the documentation of time units for deadline scheduler
parameters (Christian Loehle)
- Remove the HZ_BW chicken-bit feature flag introduced a year ago,
the original change seems to be working fine (Phil Auld)
- Misc fixes and cleanups (Chen Yu, Dan Carpenter, Huang Shijie,
Peilin He, Qais Yousefm and Vincent Guittot)
* tag 'sched-core-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched/cpufreq: Use NSEC_PER_MSEC for deadline task
cpufreq/cppc: Use NSEC_PER_MSEC for deadline task
sched/deadline: Clarify nanoseconds in uapi
sched/deadline: Convert schedtool example to chrt
sched/debug: Fix the runnable tasks output
sched: Fix sched_delayed vs sched_core
kernel/sched: Fix util_est accounting for DELAY_DEQUEUE
kthread: Fix task state in kthread worker if being frozen
sched/pelt: Use rq_clock_task() for hw_pressure
sched/fair: Move effective_cpu_util() and effective_cpu_util() in fair.c
sched/core: Introduce SM_IDLE and an idle re-entry fast-path in __schedule()
sched: Add put_prev_task(.next)
sched: Rework dl_server
sched: Combine the last put_prev_task() and the first set_next_task()
sched: Rework pick_next_task()
sched: Split up put_prev_task_balance()
sched: Clean up DL server vs core sched
sched: Fixup set_next_task() implementations
sched: Use set_next_task(.first) where required
sched/fair: Properly deactivate sched_delayed task upon class change
...
|
||
|
Linus Torvalds
|
9f0c253ddd |
Performance events changes for v6.12:
- Implement per-PMU context rescheduling to significantly improve single-PMU
performance, and related cleanups/fixes. (by Peter Zijlstra and Namhyung Kim)
- Fix ancient bug resulting in a lot of events being dropped erroneously
at higher sampling frequencies. (by Luo Gengkun)
- uprobes enhancements:
- Implement RCU-protected hot path optimizations for better performance:
"For baseline vs SRCU, peak througput increased from 3.7 M/s (million uprobe
triggerings per second) up to about 8 M/s. For uretprobes it's a bit more
modest with bump from 2.4 M/s to 5 M/s.
For SRCU vs RCU Tasks Trace, peak throughput for uprobes increases further from
8 M/s to 10.3 M/s (+28%!), and for uretprobes from 5.3 M/s to 5.8 M/s (+11%),
as we have more work to do on uretprobes side.
Even single-thread (no contention) performance is slightly better: 3.276 M/s to
3.396 M/s (+3.5%) for uprobes, and 2.055 M/s to 2.174 M/s (+5.8%)
for uretprobes."
(by Andrii Nakryiko et al)
- Document mmap_lock, don't abuse get_user_pages_remote(). (by Oleg Nesterov)
- Cleanups & fixes to prepare for future work:
- Remove uprobe_register_refctr()
- Simplify error handling for alloc_uprobe()
- Make uprobe_register() return struct uprobe *
- Fold __uprobe_unregister() into uprobe_unregister()
- Shift put_uprobe() from delete_uprobe() to uprobe_unregister()
- BPF: Fix use-after-free in bpf_uprobe_multi_link_attach()
(by Oleg Nesterov)
- New feature & ABI extension: allow events to use PERF_SAMPLE READ with
inheritance, enabling sample based profiling of a group of counters over
a hierarchy of processes or threads. (by Ben Gainey)
- Intel uncore & power events updates:
- Add Arrow Lake and Lunar Lake support
- Add PERF_EV_CAP_READ_SCOPE
- Clean up and enhance cpumask and hotplug support
(by Kan Liang)
- Add LNL uncore iMC freerunning support
- Use D0:F0 as a default device
(by Zhenyu Wang)
- Intel PT: fix AUX snapshot handling race. (by Adrian Hunter)
- Misc fixes and cleanups. (by James Clark, Jiri Olsa, Oleg Nesterov and Peter Zijlstra)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=E3s3
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2024-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Implement per-PMU context rescheduling to significantly improve
single-PMU performance, and related cleanups/fixes (Peter Zijlstra
and Namhyung Kim)
- Fix ancient bug resulting in a lot of events being dropped
erroneously at higher sampling frequencies (Luo Gengkun)
- uprobes enhancements:
- Implement RCU-protected hot path optimizations for better
performance:
"For baseline vs SRCU, peak througput increased from 3.7 M/s
(million uprobe triggerings per second) up to about 8 M/s. For
uretprobes it's a bit more modest with bump from 2.4 M/s to
5 M/s.
For SRCU vs RCU Tasks Trace, peak throughput for uprobes
increases further from 8 M/s to 10.3 M/s (+28%!), and for
uretprobes from 5.3 M/s to 5.8 M/s (+11%), as we have more
work to do on uretprobes side.
Even single-thread (no contention) performance is slightly
better: 3.276 M/s to 3.396 M/s (+3.5%) for uprobes, and 2.055
M/s to 2.174 M/s (+5.8%) for uretprobes."
(Andrii Nakryiko et al)
- Document mmap_lock, don't abuse get_user_pages_remote() (Oleg
Nesterov)
- Cleanups & fixes to prepare for future work:
- Remove uprobe_register_refctr()
- Simplify error handling for alloc_uprobe()
- Make uprobe_register() return struct uprobe *
- Fold __uprobe_unregister() into uprobe_unregister()
- Shift put_uprobe() from delete_uprobe() to uprobe_unregister()
- BPF: Fix use-after-free in bpf_uprobe_multi_link_attach()
(Oleg Nesterov)
- New feature & ABI extension: allow events to use PERF_SAMPLE READ
with inheritance, enabling sample based profiling of a group of
counters over a hierarchy of processes or threads (Ben Gainey)
- Intel uncore & power events updates:
- Add Arrow Lake and Lunar Lake support
- Add PERF_EV_CAP_READ_SCOPE
- Clean up and enhance cpumask and hotplug support
(Kan Liang)
- Add LNL uncore iMC freerunning support
- Use D0:F0 as a default device
(Zhenyu Wang)
- Intel PT: fix AUX snapshot handling race (Adrian Hunter)
- Misc fixes and cleanups (James Clark, Jiri Olsa, Oleg Nesterov and
Peter Zijlstra)
* tag 'perf-core-2024-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
dmaengine: idxd: Clean up cpumask and hotplug for perfmon
iommu/vt-d: Clean up cpumask and hotplug for perfmon
perf/x86/intel/cstate: Clean up cpumask and hotplug
perf: Add PERF_EV_CAP_READ_SCOPE
perf: Generic hotplug support for a PMU with a scope
uprobes: perform lockless SRCU-protected uprobes_tree lookup
rbtree: provide rb_find_rcu() / rb_find_add_rcu()
perf/uprobe: split uprobe_unregister()
uprobes: travers uprobe's consumer list locklessly under SRCU protection
uprobes: get rid of enum uprobe_filter_ctx in uprobe filter callbacks
uprobes: protected uprobe lifetime with SRCU
uprobes: revamp uprobe refcounting and lifetime management
bpf: Fix use-after-free in bpf_uprobe_multi_link_attach()
perf/core: Fix small negative period being ignored
perf: Really fix event_function_call() locking
perf: Optimize __pmu_ctx_sched_out()
perf: Add context time freeze
perf: Fix event_function_call() locking
perf: Extract a few helpers
perf: Optimize context reschedule for single PMU cases
...
|
||
|
Linus Torvalds
|
067610ebaa |
RCU pull request for v6.12
This pull request contains the following branches:
context_tracking.15.08.24a: Rename context tracking state related
symbols and remove references to "dynticks" in various context
tracking state variables and related helpers; force
context_tracking_enabled_this_cpu() to be inlined to avoid
leaving a noinstr section.
csd.lock.15.08.24a: Enhance CSD-lock diagnostic reports; add an API
to provide an indication of ongoing CSD-lock stall.
nocb.09.09.24a: Update and simplify RCU nocb code to handle
(de-)offloading of callbacks only for offline CPUs; fix RT
throttling hrtimer being armed from offline CPU.
rcutorture.14.08.24a: Remove redundant rcu_torture_ops get_gp_completed
fields; add SRCU ->same_gp_state and ->get_comp_state
functions; add generic test for NUM_ACTIVE_*RCU_POLL* for
testing RCU and SRCU polled grace periods; add CFcommon.arch
for arch-specific Kconfig options; print number of update types
in rcu_torture_write_types();
add rcutree.nohz_full_patience_delay testing to the TREE07
scenario; add a stall_cpu_repeat module parameter to test
repeated CPU stalls; add argument to limit number of CPUs a
guest OS can use in torture.sh;
rcustall.09.09.24a: Abbreviate RCU CPU stall warnings during CSD-lock
stalls; Allow dump_cpu_task() to be called without disabling
preemption; defer printing stall-warning backtrace when holding
rcu_node lock.
srcu.12.08.24a: Make SRCU gp seq wrap-around faster; add KCSAN checks
for concurrent updates to ->srcu_n_exp_nodelay and
->reschedule_count which are used in heuristics governing
auto-expediting of normal SRCU grace periods and
grace-period-state-machine delays; mark idle SRCU-barrier
callbacks to help identify stuck SRCU-barrier callback.
rcu.tasks.14.08.24a: Remove RCU Tasks Rude asynchronous APIs as they
are no longer used; stop testing RCU Tasks Rude asynchronous
APIs; fix access to non-existent percpu regions; check
processor-ID assumptions during chosen CPU calculation for
callback enqueuing; update description of rtp->tasks_gp_seq
grace-period sequence number; add rcu_barrier_cb_is_done()
to identify whether a given rcu_barrier callback is stuck;
mark idle Tasks-RCU-barrier callbacks; add
*torture_stats_print() functions to print detailed
diagnostics for Tasks-RCU variants; capture start time of
rcu_barrier_tasks*() operation to help distinguish a hung
barrier operation from a long series of barrier operations.
rcu_scaling_tests.15.08.24a:
refscale: Add a TINY scenario to support tests of Tiny RCU
and Tiny SRCU; Optimize process_durations() operation;
rcuscale: Dump stacks of stalled rcu_scale_writer() instances;
dump grace-period statistics when rcu_scale_writer() stalls;
mark idle RCU-barrier callbacks to identify stuck RCU-barrier
callbacks; print detailed grace-period and barrier diagnostics
on rcu_scale_writer() hangs for Tasks-RCU variants; warn if
async module parameter is specified for RCU implementations
that do not have async primitives such as RCU Tasks Rude;
make all writer tasks report upon hang; tolerate repeated
GFP_KERNEL failure in rcu_scale_writer(); use special allocator
for rcu_scale_writer(); NULL out top-level pointers to heap
memory to avoid double-free bugs on modprobe failures; maintain
per-task instead of per-CPU callbacks count to avoid any issues
with migration of either tasks or callbacks; constify struct
ref_scale_ops.
fixes.12.08.24a: Use system_unbound_wq for kfree_rcu work to avoid
disturbing isolated CPUs.
misc.11.08.24a: Warn on unexpected rcu_state.srs_done_tail state;
Better define "atomic" for list_replace_rcu() and
hlist_replace_rcu() routines; annotate struct
kvfree_rcu_bulk_data with __counted_by().
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSi2tPIQIc2VEtjarIAHS7/6Z0wpQUCZt8+8wAKCRAAHS7/6Z0w
pTqoAPwPN//tlEoJx2PRs6t0q+nD1YNvnZawPaRmdzgdM8zJogD+PiSN+XhqRr80
jzyvMDU4Aa0wjUNP3XsCoaCxo7L/lQk=
=bZ9z
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Neeraj Upadhyay:
"Context tracking:
- rename context tracking state related symbols and remove references
to "dynticks" in various context tracking state variables and
related helpers
- force context_tracking_enabled_this_cpu() to be inlined to avoid
leaving a noinstr section
CSD lock:
- enhance CSD-lock diagnostic reports
- add an API to provide an indication of ongoing CSD-lock stall
nocb:
- update and simplify RCU nocb code to handle (de-)offloading of
callbacks only for offline CPUs
- fix RT throttling hrtimer being armed from offline CPU
rcutorture:
- remove redundant rcu_torture_ops get_gp_completed fields
- add SRCU ->same_gp_state and ->get_comp_state functions
- add generic test for NUM_ACTIVE_*RCU_POLL* for testing RCU and SRCU
polled grace periods
- add CFcommon.arch for arch-specific Kconfig options
- print number of update types in rcu_torture_write_types()
- add rcutree.nohz_full_patience_delay testing to the TREE07 scenario
- add a stall_cpu_repeat module parameter to test repeated CPU stalls
- add argument to limit number of CPUs a guest OS can use in
torture.sh
rcustall:
- abbreviate RCU CPU stall warnings during CSD-lock stalls
- Allow dump_cpu_task() to be called without disabling preemption
- defer printing stall-warning backtrace when holding rcu_node lock
srcu:
- make SRCU gp seq wrap-around faster
- add KCSAN checks for concurrent updates to ->srcu_n_exp_nodelay and
->reschedule_count which are used in heuristics governing
auto-expediting of normal SRCU grace periods and
grace-period-state-machine delays
- mark idle SRCU-barrier callbacks to help identify stuck
SRCU-barrier callback
rcu tasks:
- remove RCU Tasks Rude asynchronous APIs as they are no longer used
- stop testing RCU Tasks Rude asynchronous APIs
- fix access to non-existent percpu regions
- check processor-ID assumptions during chosen CPU calculation for
callback enqueuing
- update description of rtp->tasks_gp_seq grace-period sequence
number
- add rcu_barrier_cb_is_done() to identify whether a given
rcu_barrier callback is stuck
- mark idle Tasks-RCU-barrier callbacks
- add *torture_stats_print() functions to print detailed diagnostics
for Tasks-RCU variants
- capture start time of rcu_barrier_tasks*() operation to help
distinguish a hung barrier operation from a long series of barrier
operations
refscale:
- add a TINY scenario to support tests of Tiny RCU and Tiny
SRCU
- optimize process_durations() operation
rcuscale:
- dump stacks of stalled rcu_scale_writer() instances and
grace-period statistics when rcu_scale_writer() stalls
- mark idle RCU-barrier callbacks to identify stuck RCU-barrier
callbacks
- print detailed grace-period and barrier diagnostics on
rcu_scale_writer() hangs for Tasks-RCU variants
- warn if async module parameter is specified for RCU implementations
that do not have async primitives such as RCU Tasks Rude
- make all writer tasks report upon hang
- tolerate repeated GFP_KERNEL failure in rcu_scale_writer()
- use special allocator for rcu_scale_writer()
- NULL out top-level pointers to heap memory to avoid double-free
bugs on modprobe failures
- maintain per-task instead of per-CPU callbacks count to avoid any
issues with migration of either tasks or callbacks
- constify struct ref_scale_ops
Fixes:
- use system_unbound_wq for kfree_rcu work to avoid disturbing
isolated CPUs
Misc:
- warn on unexpected rcu_state.srs_done_tail state
- better define "atomic" for list_replace_rcu() and
hlist_replace_rcu() routines
- annotate struct kvfree_rcu_bulk_data with __counted_by()"
* tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (90 commits)
rcu: Defer printing stall-warning backtrace when holding rcu_node lock
rcu/nocb: Remove superfluous memory barrier after bypass enqueue
rcu/nocb: Conditionally wake up rcuo if not already waiting on GP
rcu/nocb: Fix RT throttling hrtimer armed from offline CPU
rcu/nocb: Simplify (de-)offloading state machine
context_tracking: Tag context_tracking_enabled_this_cpu() __always_inline
context_tracking, rcu: Rename rcu_dyntick trace event into rcu_watching
rcu: Update stray documentation references to rcu_dynticks_eqs_{enter, exit}()
rcu: Rename rcu_momentary_dyntick_idle() into rcu_momentary_eqs()
rcu: Rename rcu_implicit_dynticks_qs() into rcu_watching_snap_recheck()
rcu: Rename dyntick_save_progress_counter() into rcu_watching_snap_save()
rcu: Rename struct rcu_data .exp_dynticks_snap into .exp_watching_snap
rcu: Rename struct rcu_data .dynticks_snap into .watching_snap
rcu: Rename rcu_dynticks_zero_in_eqs() into rcu_watching_zero_in_eqs()
rcu: Rename rcu_dynticks_in_eqs_since() into rcu_watching_snap_stopped_since()
rcu: Rename rcu_dynticks_in_eqs() into rcu_watching_snap_in_eqs()
rcu: Rename rcu_dynticks_eqs_online() into rcu_watching_online()
context_tracking, rcu: Rename rcu_dynticks_curr_cpu_in_eqs() into rcu_is_watching_curr_cpu()
context_tracking, rcu: Rename rcu_dynticks_task*() into rcu_task*()
refscale: Constify struct ref_scale_ops
...
|
||
Daniel Borkmann
|
32556ce93b |
bpf: Fix helper writes to read-only maps
Lonial found an issue that despite user- and BPF-side frozen BPF map
(like in case of .rodata), it was still possible to write into it from
a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT}
as arguments.
In check_func_arg() when the argument is as mentioned, the meta->raw_mode
is never set. Later, check_helper_mem_access(), under the case of
PTR_TO_MAP_VALUE as register base type, it assumes BPF_READ for the
subsequent call to check_map_access_type() and given the BPF map is
read-only it succeeds.
The helpers really need to be annotated as ARG_PTR_TO_{LONG,INT} | MEM_UNINIT
when results are written into them as opposed to read out of them. The
latter indicates that it's okay to pass a pointer to uninitialized memory
as the memory is written to anyway.
However, ARG_PTR_TO_{LONG,INT} is a special case of ARG_PTR_TO_FIXED_SIZE_MEM
just with additional alignment requirement. So it is better to just get
rid of the ARG_PTR_TO_{LONG,INT} special cases altogether and reuse the
fixed size memory types. For this, add MEM_ALIGNED to additionally ensure
alignment given these helpers write directly into the args via *<ptr> = val.
The .arg*_size has been initialized reflecting the actual sizeof(*<ptr>).
MEM_ALIGNED can only be used in combination with MEM_FIXED_SIZE annotated
argument types, since in !MEM_FIXED_SIZE cases the verifier does not know
the buffer size a priori and therefore cannot blindly write *<ptr> = val.
Fixes:
|
||
Yonghong Song
|
376bd59e2a |
bpf: Use fake pt_regs when doing bpf syscall tracepoint tracing
Salvatore Benedetto reported an issue that when doing syscall tracepoint
tracing the kernel stack is empty. For example, using the following
command line
bpftrace -e 'tracepoint:syscalls:sys_enter_read { print("Kernel Stack\n"); print(kstack()); }'
bpftrace -e 'tracepoint:syscalls:sys_exit_read { print("Kernel Stack\n"); print(kstack()); }'
the output for both commands is
===
Kernel Stack
===
Further analysis shows that pt_regs used for bpf syscall tracepoint
tracing is from the one constructed during user->kernel transition.
The call stack looks like
perf_syscall_enter+0x88/0x7c0
trace_sys_enter+0x41/0x80
syscall_trace_enter+0x100/0x160
do_syscall_64+0x38/0xf0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The ip address stored in pt_regs is from user space hence no kernel
stack is printed.
To fix the issue, kernel address from pt_regs is required.
In kernel repo, there are already a few cases like this. For example,
in kernel/trace/bpf_trace.c, several perf_fetch_caller_regs(fake_regs_ptr)
instances are used to supply ip address or use ip address to construct
call stack.
Instead of allocate fake_regs in the stack which may consume
a lot of bytes, the function perf_trace_buf_alloc() in
perf_syscall_{enter, exit}() is leveraged to create fake_regs,
which will be passed to perf_call_bpf_{enter,exit}().
For the above bpftrace script, I got the following output with this patch:
for tracepoint:syscalls:sys_enter_read
===
Kernel Stack
syscall_trace_enter+407
syscall_trace_enter+407
do_syscall_64+74
entry_SYSCALL_64_after_hwframe+75
===
and for tracepoint:syscalls:sys_exit_read
===
Kernel Stack
syscall_exit_work+185
syscall_exit_work+185
syscall_exit_to_user_mode+305
do_syscall_64+118
entry_SYSCALL_64_after_hwframe+75
===
Reported-by: Salvatore Benedetto <salvabenedetto@meta.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240910214037.3663272-1-yonghong.song@linux.dev
|
||
|
Andrii Nakryiko
|
d4dd9775ec |
bpf: wire up sleepable bpf_get_stack() and bpf_get_task_stack() helpers
Add sleepable implementations of bpf_get_stack() and bpf_get_task_stack() helpers and allow them to be used from sleepable BPF program (e.g., sleepable uprobes). Note, the stack trace IPs capturing itself is not sleepable (that would need to be a separate project), only build ID fetching is sleepable and thus more reliable, as it will wait for data to be paged in, if necessary. For that we make use of sleepable build_id_parse() implementation. Now that build ID related internals in kernel/bpf/stackmap.c can be used both in sleepable and non-sleepable contexts, we need to add additional rcu_read_lock()/rcu_read_unlock() protection around fetching perf_callchain_entry, but with the refactoring in previous commit it's now pretty straightforward. We make sure to do rcu_read_unlock (in sleepable mode only) right before stack_map_get_build_id_offset() call which can sleep. By that time we don't have any more use of perf_callchain_entry. Note, bpf_get_task_stack() will fail for user mode if task != current. And for kernel mode build ID are irrelevant. So in that sense adding sleepable bpf_get_task_stack() implementation is a no-op. It feel right to wire this up for symmetry and completeness, but I'm open to just dropping it until we support `user && crosstask` condition. Reviewed-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240829174232.3133883-10-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Andy Shevchenko
|
4e378158e5 |
tracing: Drop unused helper function to fix the build
A helper function defined but not used. This, in particular,
prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:
kernel/trace/trace.c:2229:19: error: unused function 'run_tracer_selftest' [-Werror,-Wunused-function]
2229 | static inline int run_tracer_selftest(struct tracer *type)
| ^~~~~~~~~~~~~~~~~~~
Fix this by dropping unused functions.
See also commit
|
||
|
Steven Rostedt
|
af17814334 |
tracing/osnoise: Fix build when timerlat is not enabled
To fix some critical section races, the interface_lock was added to a few
locations. One of those locations was above where the interface_lock was
declared, so the declaration was moved up before that usage.
Unfortunately, where it was placed was inside a CONFIG_TIMERLAT_TRACER
ifdef block. As the interface_lock is used outside that config, this broke
the build when CONFIG_OSNOISE_TRACER was enabled but
CONFIG_TIMERLAT_TRACER was not.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Helena Anna" <helena.anna.dubel@intel.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/20240909103231.23a289e2@gandalf.local.home
Fixes:
|
||
Jiri Olsa
|
900f362e20 |
bpf: Fix uprobe multi pid filter check
Uprobe multi link does its own process (thread leader) filtering before running the bpf program by comparing task's vm pointers. But as Oleg pointed out there can be processes sharing the vm (CLONE_VM), so we can't just compare task->vm pointers, but instead we need to use same_thread_group call. Suggested-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/bpf/20240905115124.1503998-2-jolsa@kernel.org |
||
|
Steven Rostedt
|
5bfbcd1ee5 |
tracing/timerlat: Add interface_lock around clearing of kthread in stop_kthread()
The timerlat interface will get and put the task that is part of the
"kthread" field of the osn_var to keep it around until all references are
released. But here's a race in the "stop_kthread()" code that will call
put_task_struct() on the kthread if it is not a kernel thread. This can
race with the releasing of the references to that task struct and the
put_task_struct() can be called twice when it should have been called just
once.
Take the interface_lock() in stop_kthread() to synchronize this change.
But to do so, the function stop_per_cpu_kthreads() needs to change the
loop from for_each_online_cpu() to for_each_possible_cpu() and remove the
cpu_read_lock(), as the interface_lock can not be taken while the cpu
locks are held. The only side effect of this change is that it may do some
extra work, as the per_cpu variables of the offline CPUs would not be set
anyway, and would simply be skipped in the loop.
Remove unneeded "return;" in stop_kthread().
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240905113359.2b934242@gandalf.local.home
Fixes:
|
||
|
Steven Rostedt
|
e6a53481da |
tracing/timerlat: Only clear timer if a kthread exists
The timerlat tracer can use user space threads to check for osnoise and
timer latency. If the program using this is killed via a SIGTERM, the
threads are shutdown one at a time and another tracing instance can start
up resetting the threads before they are fully closed. That causes the
hrtimer assigned to the kthread to be shutdown and freed twice when the
dying thread finally closes the file descriptors, causing a use-after-free
bug.
Only cancel the hrtimer if the associated thread is still around. Also add
the interface_lock around the resetting of the tlat_var->kthread.
Note, this is just a quick fix that can be backported to stable. A real
fix is to have a better synchronization between the shutdown of old
threads and the starting of new ones.
Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240905085330.45985730@gandalf.local.home
Fixes:
|
||
|
Steven Rostedt
|
177e1cc2f4 |
tracing/osnoise: Use a cpumask to know what threads are kthreads
The start_kthread() and stop_thread() code was not always called with the
interface_lock held. This means that the kthread variable could be
unexpectedly changed causing the kthread_stop() to be called on it when it
should not have been, leading to:
while true; do
rtla timerlat top -u -q & PID=$!;
sleep 5;
kill -INT $PID;
sleep 0.001;
kill -TERM $PID;
wait $PID;
done
Causing the following OOPS:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc76d1b-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:hrtimer_active+0x58/0x300
Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f
RSP: 0018:ffff88811d97f940 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b
RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28
RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60
R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d
R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28
FS: 0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0
Call Trace:
<TASK>
? die_addr+0x40/0xa0
? exc_general_protection+0x154/0x230
? asm_exc_general_protection+0x26/0x30
? hrtimer_active+0x58/0x300
? __pfx_mutex_lock+0x10/0x10
? __pfx_locks_remove_file+0x10/0x10
hrtimer_cancel+0x15/0x40
timerlat_fd_release+0x8e/0x1f0
? security_file_release+0x43/0x80
__fput+0x372/0xb10
task_work_run+0x11e/0x1f0
? _raw_spin_lock+0x85/0xe0
? __pfx_task_work_run+0x10/0x10
? poison_slab_object+0x109/0x170
? do_exit+0x7a0/0x24b0
do_exit+0x7bd/0x24b0
? __pfx_migrate_enable+0x10/0x10
? __pfx_do_exit+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x64/0x140
? _raw_spin_lock_irq+0x86/0xe0
do_group_exit+0xb0/0x220
get_signal+0x17ba/0x1b50
? vfs_read+0x179/0xa40
? timerlat_fd_read+0x30b/0x9d0
? __pfx_get_signal+0x10/0x10
? __pfx_timerlat_fd_read+0x10/0x10
arch_do_signal_or_restart+0x8c/0x570
? __pfx_arch_do_signal_or_restart+0x10/0x10
? vfs_read+0x179/0xa40
? ksys_read+0xfe/0x1d0
? __pfx_ksys_read+0x10/0x10
syscall_exit_to_user_mode+0xbc/0x130
do_syscall_64+0x74/0x110
? __pfx___rseq_handle_notify_resume+0x10/0x10
? __pfx_ksys_read+0x10/0x10
? fpregs_restore_userregs+0xdb/0x1e0
? fpregs_restore_userregs+0xdb/0x1e0
? syscall_exit_to_user_mode+0x116/0x130
? do_syscall_64+0x74/0x110
? do_syscall_64+0x74/0x110
? do_syscall_64+0x74/0x110
entry_SYSCALL_64_after_hwframe+0x71/0x79
RIP: 0033:0x7ff0070eca9c
Code: Unable to access opcode bytes at 0x7ff0070eca72.
RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c
RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003
RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0
R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003
R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008
</TASK>
Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core
---[ end trace 0000000000000000 ]---
This is because it would mistakenly call kthread_stop() on a user space
thread making it "exit" before it actually exits.
Since kthreads are created based on global behavior, use a cpumask to know
when kthreads are running and that they need to be shutdown before
proceeding to do new work.
Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/
This was debugged by using the persistent ring buffer:
Link: https://lore.kernel.org/all/20240823013902.135036960@goodmis.org/
Note, locking was originally used to fix this, but that proved to cause too
many deadlocks to work around:
https://lore.kernel.org/linux-trace-kernel/20240823102816.5e55753b@gandalf.local.home/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240904103428.08efdf4c@gandalf.local.home
Fixes:
|
||
Peter Zijlstra
|
04b01625da |
perf/uprobe: split uprobe_unregister()
With uprobe_unregister() having grown a synchronize_srcu(), it becomes fairly slow to call. Esp. since both users of this API call it in a loop. Peel off the sync_srcu() and do it once, after the loop. We also need to add uprobe_unregister_sync() into uprobe_register()'s error handling path, as we need to be careful about returning to the caller before we have a guarantee that partially attached consumer won't be called anymore. This is an unlikely slow path and this should be totally fine to be slow in the case of a failed attach. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org> Co-developed-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/r/20240903174603.3554182-6-andrii@kernel.org |
||
|
Andrii Nakryiko
|
59da880afe |
uprobes: get rid of enum uprobe_filter_ctx in uprobe filter callbacks
It serves no purpose beyond adding unnecessray argument passed to the filter callback. Just get rid of it, no one is actually using it. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/r/20240903174603.3554182-4-andrii@kernel.org |
||
Oleg Nesterov
|
5fe6e308ab |
bpf: Fix use-after-free in bpf_uprobe_multi_link_attach()
If bpf_link_prime() fails, bpf_uprobe_multi_link_attach() goes to the
error_free label and frees the array of bpf_uprobe's without calling
bpf_uprobe_unregister().
This leaks bpf_uprobe->uprobe and worse, this frees bpf_uprobe->consumer
without removing it from the uprobe->consumers list.
Fixes:
|
||
Zheng Yejian
|
49aa8a1f4d |
tracing: Avoid possible softlockup in tracing_iter_reset()
In __tracing_open(), when max latency tracers took place on the cpu,
the time start of its buffer would be updated, then event entries with
timestamps being earlier than start of the buffer would be skipped
(see tracing_iter_reset()).
Softlockup will occur if the kernel is non-preemptible and too many
entries were skipped in the loop that reset every cpu buffer, so add
cond_resched() to avoid it.
Cc: stable@vger.kernel.org
Fixes:
|
||
Ingo Molnar
|
95c13662b6 |
Merge branch 'perf/urgent' into perf/core, to pick up fixes
This also refreshes the -rc1 based branch to -rc5. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Steven Rostedt
|
ef2bd81d0c |
tracing: Add option to set an instance to be the trace_printk destination
Add a option "trace_printk_dest" that will make the tracing instance the location that trace_printk() will go to. This is useful if the trace_printk or one of the top level tracers is too noisy and there's a need to separate the two. Then an instance can be created, the trace_printk can be set to go there instead, where it will not be lost in the noise of the top level tracer. Note, only one instance can be the destination of trace_printk at a time. If an instance sets this flag, the instance that had it set will have it cleared. There is always one instance that has this set. By default, that is the top instance. This flag cannot be cleared from the top instance. Doing so will result in an -EINVAL. The only way this flag can be cleared from the top instance is by another instance setting it. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vincent Donnefort <vdonnefort@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineeth Pillai <vineeth@bitbyteword.org> Cc: Beau Belgrave <beaub@linux.microsoft.com> Cc: Alexander Graf <graf@amazon.com> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ross Zwisler <zwisler@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Alexander Aring <aahringo@redhat.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Cc: Tomas Glozar <tglozar@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: "Jonathan Corbet" <corbet@lwn.net> Link: https://lore.kernel.org/20240823014019.545459018@goodmis.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
9b7bdf6f6e |
tracing: Have trace_printk not use binary prints if boot buffer
If the persistent boot mapped ring buffer is used for trace_printk(), force it to not use the binary versions. trace_printk() by default uses bin_printf() that only saves the pointer to the format and not the format itself inside the ring buffer. But for a persistent buffer that is read after reboot, the pointers to the format strings may not be the same, or worse, not even exist! Instead, just force the more robust, but slower, version that does the formatting before saving into the ring buffer. The boot mapped buffer can now be used for trace_printk and friends! Using the trace_printk() and the persistent buffer was used to debug the issue with the osnoise tracer: Link: https://lore.kernel.org/all/20240822103443.6a6ae051@gandalf.local.home/ Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vincent Donnefort <vdonnefort@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineeth Pillai <vineeth@bitbyteword.org> Cc: Beau Belgrave <beaub@linux.microsoft.com> Cc: Alexander Graf <graf@amazon.com> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ross Zwisler <zwisler@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Alexander Aring <aahringo@redhat.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Cc: Tomas Glozar <tglozar@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: "Jonathan Corbet" <corbet@lwn.net> Link: https://lore.kernel.org/20240823014019.386925800@goodmis.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
ddb8ea9e5a |
tracing: Allow trace_printk() to go to other instance buffers
Currently, trace_printk() just goes to the top level ring buffer. But there may be times that it should go to one of the instances created by the kernel command line. Add a new trace_instance flag: traceprintk (also can use "printk" or "trace_printk" as people tend to forget the actual flag name). trace_instance=foo^traceprintk Will assign the trace_printk to this buffer at boot up. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vincent Donnefort <vdonnefort@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineeth Pillai <vineeth@bitbyteword.org> Cc: Beau Belgrave <beaub@linux.microsoft.com> Cc: Alexander Graf <graf@amazon.com> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ross Zwisler <zwisler@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Alexander Aring <aahringo@redhat.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Cc: Tomas Glozar <tglozar@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: "Jonathan Corbet" <corbet@lwn.net> Link: https://lore.kernel.org/20240823014019.226694946@goodmis.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
b6fc31b687 |
tracing: Add "traceoff" flag to boot time tracing instances
Add a "flags" delimiter (^) to the "trace_instance" kernel command line parameter, and add the "traceoff" flag. The format is: trace_instance=<name>[^<flag1>[^<flag2>]][@<memory>][,<events>] The code allows for more than one flag to be added, but currently only "traceoff" is done so. The motivation for this change came from debugging with the persistent ring buffer and having trace_printk() writing to it. The trace_printk calls are always enabled, and the boot after the crash was having the unwanted trace_printks from the current boot inject into the ring buffer with the trace_printks of the crash kernel, making the output very confusing. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vincent Donnefort <vdonnefort@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineeth Pillai <vineeth@bitbyteword.org> Cc: Beau Belgrave <beaub@linux.microsoft.com> Cc: Alexander Graf <graf@amazon.com> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ross Zwisler <zwisler@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Alexander Aring <aahringo@redhat.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Cc: Tomas Glozar <tglozar@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: "Jonathan Corbet" <corbet@lwn.net> Link: https://lore.kernel.org/20240823014019.053229958@goodmis.org Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Vincent Donnefort
|
eb2dcde9f9 |
ring-buffer: Align meta-page to sub-buffers for improved TLB usage
Previously, the mapped ring-buffer layout caused misalignment between the meta-page and sub-buffers when the sub-buffer size was not a multiple of PAGE_SIZE. This prevented hardware with larger TLB entries from utilizing them effectively. Add a padding with the zero-page between the meta-page and sub-buffers. Also update the ring-buffer map_test to verify that padding. Link: https://lore.kernel.org/20240628104611.1443542-1-vdonnefort@google.com Signed-off-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
d0f2d6e951 |
ring-buffer: Add magic and struct size to boot up meta data
Add a magic number as well as save the struct size of the ring_buffer_meta structure in the meta data to also use as validation. Updating the magic number could be used to force a invalidation between kernel versions, and saving the structure size is also a good method to make sure the content is what is expected. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20240815115032.0c197b32@rorschach.local.home Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
bca704f62d |
ring-buffer: Don't reset persistent ring-buffer meta saved addresses
The text and data address is saved in the meta data so that it can be used
to know the delta of the text and data addresses of the last boot compared
to the text and data addresses of the current boot. The delta is used to
convert function pointer entries in the ring buffer to something that can
be used by kallsyms (note this only works for built-in functions).
But the saved addresses get reset on boot up. If the buffer is not used
and there's another reboot, then the saved text and data addresses will be
of the last boot and not that of the boot that created the content in the
ring buffer.
To get an idea of the issue:
# trace-cmd start -B boot_mapped -p function
# reboot
# trace-cmd show -B boot_mapped | tail
<...>-1 [000] d..1. 461.983243: native_apic_msr_write <-native_kick_ap
<...>-1 [000] d..1. 461.983244: __pfx_native_apic_msr_eoi <-native_kick_ap
<...>-1 [000] d..1. 461.983244: reserve_irq_vector_locked <-native_kick_ap
<...>-1 [000] d..1. 461.983262: branch_emulate_op <-native_kick_ap
<...>-1 [000] d..1. 461.983262: __ia32_sys_ia32_pread64 <-native_kick_ap
<...>-1 [000] d..1. 461.983263: native_kick_ap <-__smpboot_create_thread
<...>-1 [000] d..1. 461.983263: store_cache_disable <-native_kick_ap
<...>-1 [000] d..1. 461.983279: acpi_power_off_prepare <-native_kick_ap
<...>-1 [000] d..1. 461.983280: __pfx_acpi_ns_delete_node <-acpi_suspend_enter
<...>-1 [000] d..1. 461.983280: __pfx_acpi_os_release_lock <-acpi_suspend_enter
# reboot
# trace-cmd show -B boot_mapped |tail
<...>-1 [000] d..1. 461.983243: 0xffffffffa9669220 <-0xffffffffa965f3db
<...>-1 [000] d..1. 461.983244: 0xffffffffa96690f0 <-0xffffffffa965f3db
<...>-1 [000] d..1. 461.983244: 0xffffffffa9663fa0 <-0xffffffffa965f3db
<...>-1 [000] d..1. 461.983262: 0xffffffffa9672e80 <-0xffffffffa965f3e0
<...>-1 [000] d..1. 461.983262: 0xffffffffa962b940 <-0xffffffffa965f3ec
<...>-1 [000] d..1. 461.983263: 0xffffffffa965f540 <-0xffffffffa96e1362
<...>-1 [000] d..1. 461.983263: 0xffffffffa963c940 <-0xffffffffa965f55b
<...>-1 [000] d..1. 461.983279: 0xffffffffa9ee30c0 <-0xffffffffa965f59b
<...>-1 [000] d..1. 461.983280: 0xffffffffa9f16c10 <-0xffffffffa9ee3157
<...>-1 [000] d..1. 461.983280: 0xffffffffa9ee02e0 <-0xffffffffa9ee3157
By not updating the saved text and data addresses in the meta data at
every boot up and only updating them when the buffer is reset, it
allows multiple boots to see the same data.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20240815113629.0dc90af8@rorschach.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
Alexei Starovoitov
|
50c374c6d1 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Cross-merge bpf fixes after downstream PR including important fixes (from bpf-next point of view): commit |
||
|
Masami Hiramatsu (Google)
|
bc754cc76d |
tracing: Fix memory leak in fgraph storage selftest
With ftrace boot-time selftest, kmemleak reported some memory leaks in
the new test case for function graph storage for multiple tracers.
unreferenced object 0xffff888005060080 (size 32):
comm "swapper/0", pid 1, jiffies 4294676440
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 20 10 06 05 80 88 ff ff ........ .......
54 0c 1e 81 ff ff ff ff 00 00 00 00 00 00 00 00 T...............
backtrace (crc 7c93416c):
[<000000000238ee6f>] __kmalloc_cache_noprof+0x11f/0x2a0
[<0000000033d2b6c5>] enter_record+0xe8/0x150
[<0000000054c38424>] match_records+0x1cd/0x230
[<00000000c775b63d>] ftrace_set_hash+0xff/0x380
[<000000007bf7208c>] ftrace_set_filter+0x70/0x90
[<00000000a5c08dda>] test_graph_storage_multi+0x2e/0xf0
[<000000006ba028ca>] trace_selftest_startup_function_graph+0x1e8/0x260
[<00000000a715d3eb>] run_tracer_selftest+0x111/0x190
[<00000000395cbf90>] register_tracer+0xdf/0x1f0
[<0000000093e67f7b>] do_one_initcall+0x141/0x3b0
[<00000000c591b682>] do_initcall_level+0x82/0xa0
[<000000004e4c6600>] do_initcalls+0x43/0x70
[<0000000034f3c4e4>] kernel_init_freeable+0x170/0x1f0
[<00000000c7a5dab2>] kernel_init+0x1a/0x1a0
[<00000000ea105947>] ret_from_fork+0x3a/0x50
[<00000000a1932e84>] ret_from_fork_asm+0x1a/0x30
...
This means filter hash allocated for the fixtures are not correctly
released after the test.
Free those hash lists after tests are done and split the loop for
initialize fixture and register fixture for rollback.
Fixes:
|
||
|
Masami Hiramatsu (Google)
|
a069a22f39 |
tracing: fgraph: Fix to add new fgraph_ops to array after ftrace_startup_subops()
Since the register_ftrace_graph() assigns a new fgraph_ops to
fgraph_array before registring it by ftrace_startup_subops(), the new
fgraph_ops can be used in function_graph_enter().
In most cases, it is still OK because those fgraph_ops's hashtable is
already initialized by ftrace_set_filter*() etc.
But if a user registers a new fgraph_ops which does not initialize the
hash list, ftrace_ops_test() in function_graph_enter() causes a NULL
pointer dereference BUG because fgraph_ops->ops.func_hash is NULL.
This can be reproduced by the below commands because function profiler's
fgraph_ops does not initialize the hash list;
# cd /sys/kernel/tracing
# echo function_graph > current_tracer
# echo 1 > function_profile_enabled
To fix this problem, add a new fgraph_ops to fgraph_array after
ftrace_startup_subops(). Thus, until the new fgraph_ops is initialized,
we will see fgraph_stub on the corresponding fgraph_array entry.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devnote2
Fixes:
|
||
Matteo Croce
|
7f6287417b |
bpf: Allow bpf_current_task_under_cgroup() with BPF_CGROUP_*
The helper bpf_current_task_under_cgroup() currently is only allowed for tracing programs, allow its usage also in the BPF_CGROUP_* program types. Move the code from kernel/trace/bpf_trace.c to kernel/bpf/helpers.c, so it compiles also without CONFIG_BPF_EVENTS. This will be used in systemd-networkd to monitor the sysctl writes, and filter it's own writes from others: https://github.com/systemd/systemd/pull/32212 Signed-off-by: Matteo Croce <teknoraver@meta.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240819162805.78235-3-technoboy85@gmail.com |
||
Valentin Schneider
|
32a9f26e5e |
rcu: Rename rcu_momentary_dyntick_idle() into rcu_momentary_eqs()
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to RCU_WATCHING, replace "dyntick_idle" into "eqs" to drop the dyntick reference. Signed-off-by: Valentin Schneider <vschneid@redhat.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org> |
||
|
Steven Rostedt
|
4c57d0be52 |
tracing/fgraph: Have fgraph handle previous boot function addresses
Update the function graph code to modify the function addresses for a
previous boot buffer so that it matches the current kallsyms (note this
does not handle module addresses, yet).
After a reboot, instead of seeing:
# trace-cmd show -B boot_mapped | tail -n30
swapper/0-1 [000] d..2. 56.286470: 0) 0.481 us | 0xffffffff925da5c4();
swapper/0-1 [000] d.... 56.286471: 0) 4.065 us | }
swapper/0-1 [000] d.... 56.286471: 0) 4.920 us | }
swapper/0-1 [000] d..1. 56.286472: 0) | 0xffffffff92536254() {
swapper/0-1 [000] d..1. 56.286472: 0) + 28.974 us | 0xffffffff92534e30();
swapper/0-1 [000] d.... 56.286516: 0) + 43.881 us | }
swapper/0-1 [000] d..1. 56.286517: 0) | 0xffffffff925136c4() {
swapper/0-1 [000] d..1. 56.286518: 0) | 0xffffffff92514a14() {
swapper/0-1 [000] d..1. 56.286518: 0) 6.003 us | 0xffffffff92514200();
swapper/0-1 [000] d.... 56.286529: 0) + 11.510 us | }
swapper/0-1 [000] d.... 56.286529: 0) + 12.895 us | }
swapper/0-1 [000] d.... 56.286530: 0) ! 382.884 us | }
swapper/0-1 [000] d..1. 56.286530: 0) | 0xffffffff92536444() {
swapper/0-1 [000] d..1. 56.286531: 0) | 0xffffffff92536254() {
swapper/0-1 [000] d..1. 56.286531: 0) + 26.335 us | 0xffffffff92534e30();
swapper/0-1 [000] d.... 56.286560: 0) + 29.511 us | }
swapper/0-1 [000] d.... 56.286561: 0) + 30.452 us | }
swapper/0-1 [000] d..1. 56.286562: 0) | 0xffffffff9253c014() {
swapper/0-1 [000] d..1. 56.286562: 0) | 0xffffffff9253bed4() {
swapper/0-1 [000] d..1. 56.286563: 0) + 13.465 us | 0xffffffff92536684();
swapper/0-1 [000] d.... 56.286577: 0) + 14.651 us | }
swapper/0-1 [000] d.... 56.286577: 0) + 15.821 us | }
swapper/0-1 [000] d..1. 56.286578: 0) 0.667 us | 0xffffffff92547074();
swapper/0-1 [000] d..1. 56.286579: 0) 0.453 us | 0xffffffff924f35c4();
swapper/0-1 [000] d.... 56.286580: 0) # 3906.348 us | }
swapper/0-1 [000] d..1. 56.286581: 0) | 0xffffffff92531a14() {
swapper/0-1 [000] d..1. 56.286581: 0) 0.518 us | 0xffffffff92505cb4();
swapper/0-1 [000] d..1. 56.286595: 0) | 0xffffffff92db83c4() {
swapper/0-1 [000] d..1. 56.286596: 0) | 0xffffffff92dec2e4() {
swapper/0-1 [000] d..1. 56.286597: 0) | 0xffffffff92db5304() {
It now shows:
# trace-cmd show -B boot_mapped | tail -n30
swapper/0-1 [000] d..2. 363.079099: 0) 0.483 us | preempt_count_sub();
swapper/0-1 [000] d.... 363.079100: 0) 4.112 us | }
swapper/0-1 [000] d.... 363.079101: 0) 4.979 us | }
swapper/0-1 [000] d..1. 363.079101: 0) | disable_local_APIC() {
swapper/0-1 [000] d..1. 363.079102: 0) + 29.153 us | clear_local_APIC.part.0();
swapper/0-1 [000] d.... 363.079148: 0) + 46.517 us | }
swapper/0-1 [000] d..1. 363.079149: 0) | mcheck_cpu_clear() {
swapper/0-1 [000] d..1. 363.079149: 0) | mce_intel_feature_clear() {
swapper/0-1 [000] d..1. 363.079150: 0) 5.871 us | lmce_supported();
swapper/0-1 [000] d.... 363.079161: 0) + 11.340 us | }
swapper/0-1 [000] d.... 363.079161: 0) + 12.638 us | }
swapper/0-1 [000] d.... 363.079162: 0) ! 383.518 us | }
swapper/0-1 [000] d..1. 363.079162: 0) | lapic_shutdown() {
swapper/0-1 [000] d..1. 363.079163: 0) | disable_local_APIC() {
swapper/0-1 [000] d..1. 363.079163: 0) + 26.144 us | clear_local_APIC.part.0();
swapper/0-1 [000] d.... 363.079192: 0) + 29.424 us | }
swapper/0-1 [000] d.... 363.079192: 0) + 30.376 us | }
swapper/0-1 [000] d..1. 363.079193: 0) | restore_boot_irq_mode() {
swapper/0-1 [000] d..1. 363.079194: 0) | native_restore_boot_irq_mode() {
swapper/0-1 [000] d..1. 363.079194: 0) + 13.863 us | disconnect_bsp_APIC();
swapper/0-1 [000] d.... 363.079209: 0) + 14.933 us | }
swapper/0-1 [000] d.... 363.079209: 0) + 16.009 us | }
swapper/0-1 [000] d..1. 363.079210: 0) 0.694 us | hpet_disable();
swapper/0-1 [000] d..1. 363.079211: 0) 0.511 us | iommu_shutdown_noop();
swapper/0-1 [000] d.... 363.079212: 0) # 3980.260 us | }
swapper/0-1 [000] d..1. 363.079212: 0) | native_machine_emergency_restart() {
swapper/0-1 [000] d..1. 363.079213: 0) 0.495 us | tboot_shutdown();
swapper/0-1 [000] d..1. 363.079230: 0) | acpi_reboot() {
swapper/0-1 [000] d..1. 363.079231: 0) | acpi_reset() {
swapper/0-1 [000] d..1. 363.079232: 0) | acpi_os_write_port() {
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20240813171257.478901820@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Steven Rostedt (Google)
|
29a02ec665 |
tracing: Allow boot instances to use reserve_mem boot memory
Allow boot instances to use memory reserved by the reserve_mem boot option. reserve_mem=12M:4096:trace trace_instance=boot_mapped@trace The above will allocate 12 megs with 4096 alignment and label it "trace". The second parameter will create a "boot_mapped" instance and use the memory reserved and labeled as "trace" as the memory for the ring buffer. That will create an instance called "boot_mapped": /sys/kernel/tracing/instances/boot_mapped Note, because the ring buffer is using a defined memory ranged, it will act just like a memory mapped ring buffer. It will not have a snapshot buffer, as it can't swap out the buffer. The snapshot files as well as any tracers that uses a snapshot will not be present in the boot_mapped instance. Also note that reserve_mem is not reliable in acquiring the same physical memory at each soft reboot. It is possible that KALSR could map the kernel at the previous boot memory location forcing the reserve_mem to return a different memory location. In this case, the previous ring buffer will be lost. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ross Zwisler <zwisler@google.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20240815082811.669f7d8c@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
6d02eefecc |
tracing: Fix ifdef of snapshots to not prevent last_boot_info file
The mapping of the ring buffer to memory allocated at boot up will also
expose a "last_boot_info" to help tooling to read the raw data from the
last boot. As instances that have their ring buffer mapped to fixed
memory cannot perform snapshots, they can either have the "snapshot" file
or the "last_boot_info" file, but not both.
The code that added the "last_boot_info" file failed to notice that the
"snapshot" creation was inside a "#ifdef CONFIG_TRACER_SNAPSHOT" and
incorrectly placed the creation of the "last_boot_info" file within the
ifdef block. Not only does it cause a warning when CONFIG_TRACER_SNAPSHOT
is not enabled, it also incorrectly prevents the file from appearing.
Link: https://lore.kernel.org/all/20240719102640.718554-1-arnd@kernel.org/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Link: https://lore.kernel.org/20240719101312.3d4ac707@rorschach.local.home
Fixes:
|
||
|
Steven Rostedt
|
ee057c8c19 |
Linux 6.11-rc3
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAma5LLIeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGwUAIAJNwbkdgTIqEsyBU wsFcXGaFSsGJNbTulINJb34jl2gD2yr4pmnnrA0NePW1TUKOnx169hNMF8NWbr/A 0cHIREV9cyfnm/kzAcnHn7cWLSmsKd+x3TnCbCyodDZQDJzdLmw3LQG+4dTNJbw1 WtJO/EoaU4qaydW2VxtApw54sirq5bopZz7rpcRapA1afzbA2TUDbnnuEWjm9KCF 5K+RZTJZA/xI9gqEwJB+/p5FglW4n/T3xcDwaQp5uFsDskgV5e1AUrRLM+icTsem 0Egrs8Ca2Vp4oBM+r9miCSwjRu04jLKyuu20p7AN8zXLyN7WGAjduS15Dv+aHRZ/ 9XABZs0= =/T17 -----END PGP SIGNATURE----- Merge tag 'v6.11-rc3' into trace/ring-buffer/core The "reserve_mem" kernel command line parameter has been pulled into v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to be able to be mapped at the address specified by the "reserve_mem" command line parameter. Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt
|
d0949cd44a |
tracing: Return from tracing_buffers_read() if the file has been closed
When running the following:
# cd /sys/kernel/tracing/
# echo 1 > events/sched/sched_waking/enable
# echo 1 > events/sched/sched_switch/enable
# echo 0 > tracing_on
# dd if=per_cpu/cpu0/trace_pipe_raw of=/tmp/raw0.dat
The dd task would get stuck in an infinite loop in the kernel. What would
happen is the following:
When ring_buffer_read_page() returns -1 (no data) then a check is made to
see if the buffer is empty (as happens when the page is not full), it will
call wait_on_pipe() to wait until the ring buffer has data. When it is it
will try again to read data (unless O_NONBLOCK is set).
The issue happens when there's a reader and the file descriptor is closed.
The wait_on_pipe() will return when that is the case. But this loop will
continue to try again and wait_on_pipe() will again return immediately and
the loop will continue and never stop.
Simply check if the file was closed before looping and exit out if it is.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240808235730.78bf63e5@rorschach.local.home
Fixes:
|
||
Jianhui Zhou
|
58f7e4d7ba |
ring-buffer: Remove unused function ring_buffer_nr_pages()
Because ring_buffer_nr_pages() is not an inline function and user accesses buffer->buffers[cpu]->nr_pages directly, the function ring_buffer_nr_pages is removed. Signed-off-by: Jianhui Zhou <912460177@qq.com> Link: https://lore.kernel.org/tencent_F4A7E9AB337F44E0F4B858D07D19EF460708@qq.com Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Tze-nan Wu
|
bcf86c01ca |
tracing: Fix overflow in get_free_elt()
"tracing_map->next_elt" in get_free_elt() is at risk of overflowing.
Once it overflows, new elements can still be inserted into the tracing_map
even though the maximum number of elements (`max_elts`) has been reached.
Continuing to insert elements after the overflow could result in the
tracing_map containing "tracing_map->max_size" elements, leaving no empty
entries.
If any attempt is made to insert an element into a full tracing_map using
`__tracing_map_insert()`, it will cause an infinite loop with preemption
disabled, leading to a CPU hang problem.
Fix this by preventing any further increments to "tracing_map->next_elt"
once it reaches "tracing_map->max_elt".
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes:
|
||
Petr Pavlu
|
604b72b325 |
function_graph: Fix the ret_stack used by ftrace_graph_ret_addr()
When ftrace_graph_ret_addr() is invoked to convert a found stack return
address to its original value, the function can end up producing the
following crash:
[ 95.442712] BUG: kernel NULL pointer dereference, address: 0000000000000028
[ 95.442720] #PF: supervisor read access in kernel mode
[ 95.442724] #PF: error_code(0x0000) - not-present page
[ 95.442727] PGD 0 P4D 0-
[ 95.442731] Oops: Oops: 0000 [#1] PREEMPT SMP PTI
[ 95.442736] CPU: 1 UID: 0 PID: 2214 Comm: insmod Kdump: loaded Tainted: G OE K 6.11.0-rc1-default #1 67c62a3b3720562f7e7db5f11c1fdb40b7a2857c
[ 95.442747] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE, [K]=LIVEPATCH
[ 95.442750] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[ 95.442754] RIP: 0010:ftrace_graph_ret_addr+0x42/0xc0
[ 95.442766] Code: [...]
[ 95.442773] RSP: 0018:ffff979b80ff7718 EFLAGS: 00010006
[ 95.442776] RAX: ffffffff8ca99b10 RBX: ffff979b80ff7760 RCX: ffff979b80167dc0
[ 95.442780] RDX: ffffffff8ca99b10 RSI: ffff979b80ff7790 RDI: 0000000000000005
[ 95.442783] RBP: 0000000000000001 R08: 0000000000000005 R09: 0000000000000000
[ 95.442786] R10: 0000000000000005 R11: 0000000000000000 R12: ffffffff8e9491e0
[ 95.442790] R13: ffffffff8d6f70f0 R14: ffff979b80167da8 R15: ffff979b80167dc8
[ 95.442793] FS: 00007fbf83895740(0000) GS:ffff8a0afdd00000(0000) knlGS:0000000000000000
[ 95.442797] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 95.442800] CR2: 0000000000000028 CR3: 0000000005070002 CR4: 0000000000370ef0
[ 95.442806] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 95.442809] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 95.442816] Call Trace:
[ 95.442823] <TASK>
[ 95.442896] unwind_next_frame+0x20d/0x830
[ 95.442905] arch_stack_walk_reliable+0x94/0xe0
[ 95.442917] stack_trace_save_tsk_reliable+0x7d/0xe0
[ 95.442922] klp_check_and_switch_task+0x55/0x1a0
[ 95.442931] task_call_func+0xd3/0xe0
[ 95.442938] klp_try_switch_task.part.5+0x37/0x150
[ 95.442942] klp_try_complete_transition+0x79/0x2d0
[ 95.442947] klp_enable_patch+0x4db/0x890
[ 95.442960] do_one_initcall+0x41/0x2e0
[ 95.442968] do_init_module+0x60/0x220
[ 95.442975] load_module+0x1ebf/0x1fb0
[ 95.443004] init_module_from_file+0x88/0xc0
[ 95.443010] idempotent_init_module+0x190/0x240
[ 95.443015] __x64_sys_finit_module+0x5b/0xc0
[ 95.443019] do_syscall_64+0x74/0x160
[ 95.443232] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 95.443236] RIP: 0033:0x7fbf82f2c709
[ 95.443241] Code: [...]
[ 95.443247] RSP: 002b:00007fffd5ea3b88 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 95.443253] RAX: ffffffffffffffda RBX: 000056359c48e750 RCX: 00007fbf82f2c709
[ 95.443257] RDX: 0000000000000000 RSI: 000056356ed4efc5 RDI: 0000000000000003
[ 95.443260] RBP: 000056356ed4efc5 R08: 0000000000000000 R09: 00007fffd5ea3c10
[ 95.443263] R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
[ 95.443267] R13: 000056359c48e6f0 R14: 0000000000000000 R15: 0000000000000000
[ 95.443272] </TASK>
[ 95.443274] Modules linked in: [...]
[ 95.443385] Unloaded tainted modules: intel_uncore_frequency(E):1 isst_if_common(E):1 skx_edac(E):1
[ 95.443414] CR2: 0000000000000028
The bug can be reproduced with kselftests:
cd linux/tools/testing/selftests
make TARGETS='ftrace livepatch'
(cd ftrace; ./ftracetest test.d/ftrace/fgraph-filter.tc)
(cd livepatch; ./test-livepatch.sh)
The problem is that ftrace_graph_ret_addr() is supposed to operate on the
ret_stack of a selected task but wrongly accesses the ret_stack of the
current task. Specifically, the above NULL dereference occurs when
task->curr_ret_stack is non-zero, but current->ret_stack is NULL.
Correct ftrace_graph_ret_addr() to work with the right ret_stack.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reported-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/20240803131211.17255-1-petr.pavlu@suse.com
Fixes:
|
||
|
Steven Rostedt
|
6e2fdceffd |
tracing: Use refcount for trace_event_file reference counter
Instead of using an atomic counter for the trace_event_file reference counter, use the refcount interface. It has various checks to make sure the reference counting is correct, and will warn if it detects an error (like refcount_inc() on '0'). Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20240726144208.687cce24@rorschach.local.home Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |