There's various different places in the drm code that get at the
nvkm_device via various creative (and not very type-safe) means.
One of those being via nvif_device.object.priv.
Another patch series is going to entirely remove the ioctl-like
interfaces beween the drm code and nvkm, and that field will no
longer exist.
This provides a safer replacement for accessing the nvkm_device,
and will used more in upcoming patches to cleanup other cases.
v2:
- fixup printk macros to not oops if used before client ctor
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-6-bskeggs@nvidia.com
HW isn't touched anymore (aside from detection) until the first
nvif_device has been allocated, so we no longer need a separate
probe-only step before kicking efifb (etc) off the HW.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-5-bskeggs@nvidia.com
We almost always want to cast the pointer from dev_get_drvdata() to
'struct nouveau_drm *', so just directly store that pointer instead,
simplifying callers, and fixing some clumsy naming of dev/drm_dev
variables at the same time.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-4-bskeggs@nvidia.com
Unify some more of the PCI/Tegra DRM driver init, both as a general
cleanup, and because a subsequent commit changes the pointer stored
via dev_set_drvdata(), and this allows the change to be made in one
place.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-3-bskeggs@nvidia.com
The next commit wants to be able to call fini() from an init() failure
path to remove the need to duplicate a bunch of cleanup.
Moving fini() above init() avoids the need for a forward-declaration.
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-2-bskeggs@nvidia.com
We would like to be able to enable vblank_disable_immediate
unconditionally, however there are a handful of cases where a small off
delay is necessary (e.g. with PSR enabled). So, we would like to be able
to adjust the vblank off delay and disable imminent values dynamically
for a given CRTC. Since, it will allow drivers to apply static screen
optimizations more quickly and consequently allow users to benefit more
so from the power savings afforded by the aforementioned optimizations,
while avoiding issues in cases where an off delay is still warranted.
In particular, the PSR case requires a small off delay of 2 frames,
otherwise display firmware isn't able to keep up with all of the
requests made to amdgpu. So, introduce drm_crtc_vblank_on_config() which
is like drm_crtc_vblank_on(), but it allows drivers to specify the
vblank CRTC configuration before enabling vblanking support for a given
CRTC.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240725205109.209743-1-hamza.mahfooz@amd.com
The partition device ioctl was removed during the development of the
initial version of qaic driver. Remove its description from the
documentation to avoid confusing readers.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240716073036.453-1-yuzenghui@huawei.com
Before building an image, the build script looks to see if there are fixes
to apply from an upstream repository. The link for the upstream repository
git://anongit.freedesktop.org/drm/drm became obsolete with the move to
Gitlab server in March 2024. Until recently, this obsolete link was
harmless because anongit would at least respond that there were no such
fixes available. In the last few days anongit has stopped responding to
requests causing the build script to hang indefinitely.
Update the link from anongit to the Gitlab server to prevent the build
script from hanging indefinitely.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717235221.64629-1-deborah.brouwer@collabora.com
This was basically just another one of amdgpus hacks. The parameter
allowed to restart the scheduler without turning fence signaling on
again.
That this is absolutely not a good idea should be obvious by now since
the fences will then just sit there and never signal.
While at it cleanup the code a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722083816.99685-1-christian.koenig@amd.com
When the bridge is powered off, disable the IRQ until the next power on
to workaround an interrupt storm on some badly-designed hardware.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240719110623.1850021-1-treapking@chromium.org
Add Densitron DMT028VGHMCMI-1D 480x640 TFT matrix 2.83 inch panel
attached to Ilitek ILI9806E DSI TCON into the ILI9806E driver.
Note that the Densitron panels use different TCONs, this driver is for
the later panel, use panel-ilitek-st7701.c for the former panel:
DMT028VGHMCMI-1A - ST7701
DMT028VGHMCMI-1D - ILI9806E
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20240724005700.196073-2-marex@denx.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240724005700.196073-2-marex@denx.de
Single characters should be put into a sequence.
Thus use the corresponding function “seq_putc” for one selected call.
This issue was transformed by using the Coccinelle software.
Suggested-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/af602b2e-4d92-4c54-9884-7db84700aa93@web.de
Make the default DP port preemphasis configurable via new DT property
"toshiba,pre-emphasis". This is useful in case the DP link properties
are known and starting link training from preemphasis setting of 0 dB
is not useful. The preemphasis can be set separately for both DP lanes
in range 0=0dB, 1=3.5dB, 2=6dB .
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708150130.54484-2-marex@denx.de
Document default DP port preemphasis configurable via new DT property
"toshiba,pre-emphasis". This is useful in case the DP link properties
are known and starting link training from preemphasis setting of 0 dB
is not useful. The preemphasis can be set separately for both DP lanes
in range 0=0dB, 1=3.5dB, 2=6dB .
This is an endpoint property, not a port property, because the TC9595
datasheet does mention that the DP might operate in some sort of split
mode, where each DP lane is used to feed one display, so in that case
there might be two endpoints.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708150130.54484-1-marex@denx.de
Limiting the allocation of higher order pages to the closest NUMA node
and enabling direct memory reclaim provides not only failsafe against
situations when memory becomes too much fragmented and the allocator is
not able to satisfy the request from the local node but falls back to
remote pages (HUGEPAGE) but also offers performance improvement.
Accessing remote pages suffers due to bandwidth limitations and could be
avoided if memory becomes defragmented and in most cases without using
manual compaction. (/proc/sys/vm/compact_memory)
Note: On certain distros such as RHEL, the proactive compaction is
disabled. (https://tinyurl.com/4f32f7rs)
v2 (chk): drop __GFP_RECLAIM since that is already set by GFP_USER
Cc: Dave Airlie <airlied@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708160636.1147308-1-rajneesh.bhardwaj@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
The docs for dma_heap_get_name were incorrect, and since they were
duplicated in the header they were wrong there too.
The docs formatting was inconsistent so I tried to make it more
consistent across functions since I'm already in here doing cleanup.
Remove multiple unused includes and alphabetize.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
[Yong: Just add a comment for "priv" to mute build warning]
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240720071606.27930-5-yunfei.dong@mediatek.com
Signed-off-by: Christian König <christian.koenig@amd.com>
TTM wants to get rid of the duplicate refcounting of the embedded GEM
object and its own reference count.
Hence, use of GEM object references where possible.
Also get rid of nouveau_bo_ref() and replace it with nouveau_bo_fini(),
which drops the initial reference we get from initializing a ttm_bo.
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718165959.3983-4-dakr@kernel.org
Calling nouveau_bo_ref() on a nouveau_bo without initializing it (and
hence the backing ttm_bo) leads to a refcount underflow.
Instead of calling nouveau_bo_ref() in the unwind path of
drm_gem_object_init(), clean things up manually.
Fixes: ab9ccb96a6 ("drm/nouveau: use prime helpers")
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718165959.3983-2-dakr@kernel.org
At shutdown if you've got a _properly_ coded DRM modeset driver then
you'll get these two warnings at shutdown time:
Skipping disable of already disabled panel
Skipping unprepare of already unprepared panel
These warnings are ugly and sound concerning, but they're actually a
sign of a properly working system. That's not great.
We're not ready to get rid of the calls to drm_panel_disable() and
drm_panel_unprepare() because we're not 100% convinced that all DRM
modeset drivers are properly calling drm_atomic_helper_shutdown() or
drm_helper_force_disable_all() at the right times. However, having the
warning show up for correctly working systems is bad.
As a bit of a workaround, add some "if" tests to try to avoid the
warning on correctly working systems. Also add some comments and
update the TODO items in the hopes that future developers won't be too
confused by what's going on here.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621134427.1.Ieb287c2c3ee3f6d3b0d5f49b29f746b93621749c@changeid
When the kmsg_dumper callback parameter changed, the reason variable
in mtdoops_do_dump() was not updated accordingly.
This breaks the build with mtdoops.
Fixes: e1a261ba59 ("printk: Add a short description string to kmsg_dump()")
Suggested-by: Knop Ryszard <ryszard.knop@intel.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://patchwork.freedesktop.org/patch/msgid/20240719152542.1554440-1-jfalempe@redhat.com
The added lvds driver and a change in the dsi driver resulted in failed
builds when COMMON_CLK is disabled:
x86_64-linux-ld: drivers/gpu/drm/stm/dw_mipi_dsi-stm.o: in function `dw_mipi_dsi_stm_remove':
dw_mipi_dsi-stm.c:(.text+0x51e): undefined reference to `clk_hw_unregister'
x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_remove':
lvds.c:(.text+0xe3): undefined reference to `of_clk_del_provider'
x86_64-linux-ld: lvds.c:(.text+0xec): undefined reference to `clk_hw_unregister'
x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_pll_config':
lvds.c:(.text+0xb5d): undefined reference to `clk_hw_get_rate'
x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_probe':
lvds.c:(.text+0x1476): undefined reference to `clk_hw_register'
x86_64-linux-ld: lvds.c:(.text+0x148b): undefined reference to `of_clk_hw_simple_get'
x86_64-linux-ld: lvds.c:(.text+0x1493): undefined reference to `of_clk_add_hw_provider'
x86_64-linux-ld: lvds.c:(.text+0x1535): undefined reference to `clk_hw_unregister'
Add this as a dependency for the stm driver itself, since it will be
required in practice anyway.
Fixes: 185f99b614 ("drm/stm: dsi: expose DSI PHY internal clock")
Fixes: aca1cbc1c9 ("drm/stm: lvds: add new STM32 LVDS Display Interface Transmitter driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240719075454.3595358-1-arnd@kernel.org
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Now that fbcon has the skip_panic option, there is no more conflicts
between drm_panic and fbcon.
Remove the build time dependency, so they can be both enabled.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717090102.968152-4-jfalempe@redhat.com
fb_info->skip_panic flag prevents fbcon from writing to the
framebuffer during a kernel panic. So set it when the drm driver
implements drm panic, to avoid overwriting the panic screen.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717090102.968152-3-jfalempe@redhat.com
This is required to avoid conflict between DRM_PANIC, and fbcon. If
a drm device already handle panic with drm_panic, it should set
the skip_panic field in fb_info, so that fbcon will stay quiet, and
not overwrite the panic_screen.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717090102.968152-3-jfalempe@redhat.com
It allows to check if the drm device supports drm_panic.
Prepare the work to have better integration with fbcon and vtconsole.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717090102.968152-2-jfalempe@redhat.com
The reload interrupt is not used by the driver. To avoid
unnecessary calls of the interrupt routine, don't enable it.
Solve small typo and add mask to simplify the driver.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240712131453.98597-1-yannick.fertre@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Implement struct drm_crtc_funcs.get_vblank_timestamp with the DRM
helper drm_crtc_vblank_helper_get_vblank_timestamp() with its helper
get_scanout_position. Read the scanout position from the MGAREG_VCOUNT
register.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718104551.575912-8-tzimmermann@suse.de
There's no VBLANK interrupt on Matrox chipsets. The workaround that is
being used here and in other free Matrox drivers is to program <linecomp>
to the value of <vblkstr> and enable the VLINE interrupt. This triggers
an interrupt at the time when VBLANK begins.
VLINE uses separate registers for enabling and clearing pending interrupts.
No extra synchronization between irq handler and the rest of the driver is
required.
v6:
- clear VLINE status bit before registering IRQ (Jocelyn)
v5:
- disable all interrupts before registering IRQ (Jocelyn)
- don't read from ICLEAR (Jocelyn)
v4:
- recreate patch on latest upstream
- use devm_request_irq() for managed cleanup
- fail if vblanking cannot be initialized
- rename register constants (Sam, Emil)
- clear interrupt before registering handler (Ville)
- move <linecomp> programming into separate commit
- set <linecomp> to <vblkstr>
- fix typo in commit message
v3:
- set <linecomp> to <vdisplay> + 1 to trigger at VBLANK
- expand comment on linecomp
v2:
- only signal vblank on CRTC 0
- use constants for registers and fields
- set VLINECLR before enabling interrupt
- test against STATUS and IEN in irq handler
- coding-style fixes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718104551.575912-7-tzimmermann@suse.de
Represent fields for horizontal and vertical blanking with <hblkstr>,
<hblkend>, <vblkstr> and <vblkend>. Aligns the code with the Matrox
programming manuals.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718104551.575912-5-tzimmermann@suse.de
Use the values with the crtc_ prefix from struct drm_display_mode to
program hardware. The DRM core adjusted these values to the requirements
of CRTC hardware.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718104551.575912-4-tzimmermann@suse.de
In mgag200_set_mode_regs(), use hexadecimal indices for accessing
registers. Aligns the code with the register indices in the Matrox
programming manuals. Also convert to lower-case hexadecimal values.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718104551.575912-2-tzimmermann@suse.de
commit 6a1688ae87 ("drm/bridge: ptn3460: Convert to I2C driver model")
has dropped all the users of the struct bridge_init from the
exynos_dp_core, while retaining unused structure definition.
Later on the driver was reworked and the definition migrated
to the analogix_dp driver. Remove unused struct bridge_init definition.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240520125551.11534-1-linux@treblig.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
