Re-inject event instead. This is what Intel suggest. Also use correct
instruction length when re-injecting soft fault/interrupt.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Only one interrupt vector can be injected from userspace irqchip at
any given time so no need to store it in a bitmap. Put it into interrupt
queue directly.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This check verifies that the guest we're trying to run in KVM_RUN
has some memory assigned to it. It enters an endless exception
loop if this is not the case.
Reported-by: Mijo Safradin <mijo@linux.vnet.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds a sanity check for the content of the guest
prefix register content before faulting in the cpu lowcore
that it refers to. The guest might end up in an endless loop
where SIE complains about missing lowcore with incorrect
content of the prefix register without this fix.
Reported-by: Mijo Safradin <mijo@linux.vnet.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch makes sure we do unlink a vcpu's sie control block
from the system control area in kvm_arch_vcpu_destroy. This
prevents illegal accesses to the sie control block from other
virtual cpus after free.
Reported-by: Mijo Safradin <mijo@linux.vnet.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The floating interrupt lock is only taken in process context. We can
replace all spin_lock_bh with standard spin_lock calls.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch reworks the s390 clock comparator wakeup to hrtimer. The clock
comparator is a per-cpu value that is compared against the TOD clock. If
ckc <= TOD an external interrupt 1004 is triggered. Since the clock comparator
and the TOD clock have a much higher resolution than jiffies we should use
hrtimers to trigger the wakeup. This speeds up guest nanosleep for small
values.
Since hrtimers callbacks run in hard-irq context, I added a tasklet to do
the actual work with enabled interrupts.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch fixes an incorrectness in the kvm backend for s390.
In case virtual cpus are being created before the corresponding
memory slot is being registered, we need to update the sie
control blocks for the virtual cpus.
*updates in v3*
In consideration of the s390 memslot constraints locking was changed
to trylock. These locks should never be held, as vcpu's can't run without
the single memslot we just assign when running this code. To ensure this
never deadlocks in case other code changes the code uses trylocks and bail
out if it can't get all locks.
Additionally most of the discussed special conditions for s390 like
only one memslot and no user_alloc are now checked for validity in
kvm_arch_set_memory_region.
Reported-by: Mijo Safradin <mijo@linux.vnet.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
Verify the cr3 address stored in vcpu->arch.cr3 points to an existant
memslot. If not, inject a triple fault.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_handle_hva relies on mmu_lock protection to safely access
the memslot structures.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_handle_hva, called by MMU notifiers, manipulates mmu data only with
the protection of mmu_lock.
Update kvm_mmu_change_mmu_pages callers to take mmu_lock, thus protecting
against kvm_handle_hva.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We currently unblock shadow interrupt state when we skip an instruction,
but failing to do so when we actually emulate one. This blocks interrupts
in key instruction blocks, in particular sti; hlt; sequences
If the instruction emulated is an sti, we have to block shadow interrupts.
The same goes for mov ss. pop ss also needs it, but we don't currently
emulate it.
Without this patch, I cannot boot gpxe option roms at vmx machines.
This is described at https://bugzilla.redhat.com/show_bug.cgi?id=494469
Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch replaces drop_interrupt_shadow with the more
general set_interrupt_shadow, that can either drop or raise
it, depending on its parameter. It also adds ->get_interrupt_shadow()
for future use.
Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_assigned_dev_ack_irq is vulnerable to a race condition with the
interrupt handler function. It does:
if (dev->host_irq_disabled) {
enable_irq(dev->host_irq);
dev->host_irq_disabled = false;
}
If an interrupt triggers before the host->dev_irq_disabled assignment,
it will disable the interrupt and set dev->host_irq_disabled to true.
On return to kvm_assigned_dev_ack_irq, dev->host_irq_disabled is set to
false, and the next kvm_assigned_dev_ack_irq call will fail to reenable
it.
Other than that, having the interrupt handler and work handlers run in
parallel sounds like asking for trouble (could not spot any obvious
problem, but better not have to, its fragile).
CC: sheng.yang@intel.com
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
KVM uses a function call IPI to cause the exit of a guest running on a
physical cpu. For virtual interrupt notification there is no need to
wait on IPI receival, or to execute any function.
This is exactly what the reschedule IPI does, without the overhead
of function IPI. So use it instead of smp_call_function_single in
kvm_vcpu_kick.
Also change the "guest_mode" variable to a bit in vcpu->requests, and
use that to collapse multiple IPI's that would be issued between the
first one and zeroing of guest mode.
This allows kvm_vcpu_kick to called with interrupts disabled.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
MTRR, PAT, MCE, and MCA are all supported (to some extent) but not reported.
Vista requires these features, so if userspace relies on kernel cpuid
reporting, it loses support for Vista.
Signed-off-by: Avi Kivity <avi@redhat.com>
The stats entry request_nmi is no longer used as the related user space
interface was dropped. So clean it up.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If a task switch caused by an event remove it from the event queue.
VMX already does that.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
On AMD CPUs sometimes the DB bit in the stack segment
descriptor is left as 1, although the whole segment has
been made unusable. Clear it here to pass an Intel VMX
entry check when cross vendor migrating.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Apparently nobody turned this on in a while...
setting apic_debug to something compilable, generates
some errors. This patch fixes it.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Intel TXT(Trusted Execution Technology) required VMX off for all cpu to work
when system shutdown.
CC: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Memory aliases with different memory type is a problem for guest. For the guest
without assigned device, the memory type of guest memory would always been the
same as host(WB); but for the assigned device, some part of memory may be used
as DMA and then set to uncacheable memory type(UC/WC), which would be a conflict of
host memory type then be a potential issue.
Snooping control can guarantee the cache correctness of memory go through the
DMA engine of VT-d.
[avi: fix build on ia64]
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Shadow_mt_mask is out of date, now it have only been used as a flag to indicate
if TDP enabled. Get rid of it and use tdp_enabled instead.
Also put memory type logical in kvm_x86_ops->get_mt_mask().
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This moves the get_cpu() call down to be called after we wake up the
waiters. Therefore the waitqueue locks can safely be rt mutex.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Sven-Thorsten Dietrich <sven@thebigcorporation.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
It just returns pending IRQ vector from the queue for VMX/SVM.
Get IRQ directly from the queue before migration and put it back
after.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Re-put pending IRQ vector into interrupt_bitmap before migration.
Otherwise it will be lost if migration happens in the wrong time.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Saves many exits to userspace in a case of IRQ chip in userspace.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Start to use interrupt/exception queues like VMX does.
This also fix the bug that if exit was caused by a guest
internal exception access to IDT the exception was not
reinjected.
Use EVENTINJ to inject interrupts. Use VINT only for detecting when IRQ
windows is open again. EVENTINJ ensures
the interrupt is injected immediately and not delayed.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_arch_interrupt_allowed() also checks IF so drop the check.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Use the same callback to inject irq/nmi events no matter what irqchip is
in use. Only from VMX for now.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
At the vector level, kernel and userspace irqchip are fairly similar.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Fix build breakage of hpa lookup in audit_mappings_page. Moreover, make
this function robust against shadow_notrap_nonpresent_pte entries.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Restore local irq enabled state before calling kvm_arch_vcpu_init(),
which calls kmalloc(GFP_KERNEL).
Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Preserve interrupt status around call to kvm_insert_vmm_mappin()
in kvm_vcpu_pre_transition().
Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Make sure to restore the psr after calling kvm_insert_vmm_mapping()
which calls ia64_itr_entry() as it disables local interrupts and
kvm_vcpu_init() may sleep.
Avoids a warning from the lock debugging code.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
