rx_l4_csum_error is now incremented only when offload is enabled
Signed-off-by: Satish Baddipadige <sbaddipa@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NC-SI firmware of type apeFW (10) is now supported.
Signed-off-by: Rob Swindell <swindell@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the unnecessary "if" statement before the "for" statement:
if (x) {
for (i = 0; i < x; i++)
...
}
Also, change the ring free function to return void as it only returns 0.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During remove_one, the driver should issue hwrm_func_drv_unrgtr
command to inform firmware that this function has been unloaded.
This is to let firmware keep track of driver present/absent state
when driver is gracefully unloaded. A keep alive timer is needed
later to keep track of driver state during abnormal shutdown.
Signed-off-by: Jeffrey Huang <huangjw@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The qlcnic_dcb_ops structures are never modified, so declare them as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chunhao Lin says:
====================
r8169: Update RTL8168H PHY parameters
Fix typo in setting PHY parameter and update the way of reading PHY register
"rg_saw_cnt".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The vlaue of RTL8168H PHY register "rg_saw_cnt" only valid from bit0 to bit13.
When read this register, add bitwise-anding its value with 0x3fff.
Signed-off-by: Chunhao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In function "rtl8168h_2_hw_phy_config", there is a typo in setting
RTL8168H PHY parameter.
Signed-off-by: Chunhao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a new device driver for a high performance SR-IOV assisted virtual
network for IBM System p and IBM System i systems. The SR-IOV VF will be
attached to the VIOS partition and mapped to the Linux client via the
hypervisor's VNIC protocol that this driver implements.
This driver is able to perform basic tx and rx, new features
and improvements will be added as they are being developed and tested.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igal Liberman says:
====================
Freescale DPAA FMan
The Freescale Data Path Acceleration Architecture (DPAA) is a set
of hardware components on specific QorIQ multicore processors.
This architecture provides the infrastructure to support
simplified sharing of networking interfaces and accelerators
by multiple CPU cores and the accelerators.
One of the DPAA accelerators is the Frame Manager (FMan)
which contains a series of hardware blocks: ports, Ethernet MACs,
a multi user RAM (MURAM) and Storage Profile (SP).
This patch set introduce the FMan drivers.
Each driver configures and initializes the corresponding
FMan hardware module (described above).
The MAC driver offers support for three different
types of MACs (eTSEC, TGEC, MEMAC).
v9 --> v10:
- Addressed feedback from David Miller
Remove private CRC implementation
- Addressed feedback from Kenneth Klette Jonassen:
- Use Kernel PHY API to configure dTSEC TBI
- Use Kernel PHY API to configure mEMAC PCS
This patchset requires device tree update:
https://patchwork.ozlabs.org/patch/559501/
- Addressed feedback from Andy Fleming
v8 --> v9:
No changes
v7 --> v8:
- Addressed feedback from David Miller
- Support for ARM:
- Device tree parsing
- IO Accessors
- Addressed compilation issue on non-PPC targets
v6 --> v7:
- Addressed compilation issue on non-PPC targets
- Removed B4860 rev 1 support
v5 --> v6:
- Addressed feedback from Scott:
- Moved kernel doc to source files
- Removed a series of configurable settings
- Miscellaneous code updates
v4 --> v5:
- Addressed feedback from David Miller:
- Removed driver layering
- Reduce namespace pollution
- Reduce code complexity and size
v3 --> v4:
- Remove device_initcall call in driver registration (redundant)
- Remove hot/cold labels
- Minor update in FMan Clock read from device-tree
- Update fixed-link support
- Addressed feedback from Stephen Hemminger
- Remove bogus blank line
v2 --> v3:
- Addressed feedback from Scott:
- Remove typedefs
- Remove unnecessary memory barriers
- Remove unnecessary casting
- Remove KConfig options
- Remove early_params
- Remove Hungarian notation
- Remove __packed__ attribute and padding from structures
- Remove unlikely attribute (where it's not needed)
- Use proper error codes and remove unnecessary prints
- Use proper values for sleep routines
- Replace complex Macros with functions
- Improve device tree processing code
- Use symbolic defines
- Add time-out in busy-wait loops
- Removed exit code (loadable module support will be added later)
- Fixed "fixed-link" issue raised by Joakim Tjernlund
v1 --> v2:
- Addressed feedback from Paul Bolle:
- General feedback of FMan Driver layer
- Remove Errata defines
- Aligned comments to Kernel Doc
- Remove Loadable Module support (not yet supported)
- Removed not needed KConfig dependencies
- Addressed feedback from Scott Wood
- Use Kernel ioread/iowrite services
- Squash FLIB source and header patches together
This submission is based on the prior Freescale DPAA FMan V3,RFC submission.
Several issues addresses in this submission:
- Reduced MAC layering and complexity
- Reduced code base
- T1024/T2080 10G best effort support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the Ethernet MAC driver supporting the three
different types of MACs: dTSEC, tGEC and mEMAC.
Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the Data Path Acceleration Architecture Frame Manger Port Driver.
The FMan driver uses a module called "Port" to represent the physical
TX and RX ports.
Each FMan version has different number of physical ports.
This patch adds The FMan Port configuration, initialization and
runtime control routines for both TX and RX.
Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Storage Profiles contain parameters that are used
by the FMan for frame reception and transmission.
Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the Data Path Acceleration Architecture Frame Manger MAC support.
This patch adds The FMan MAC configuration, initialization and
runtime control routines.
This patch contains support for these types of MACs:
- dTSEC: Three speed Ethernet controller (10/100/1000 Mbps)
- tGEC: 10G Ethernet controller (10 Gbps)
- mEMAC: Multi-rate Ethernet MAC (10/100/1000/10000 Mbps)
Different FMan revisions have different type and number of MACs.
Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the Data Path Acceleration Architecture Frame Manger Driver.
The FMan embeds a series of hardware blocks that implement a group
of Ethernet interfaces. This patch adds The FMan configuration,
initialization and runtime control routines.
The FMan driver supports several hardware versions
differentiated by things like:
- Different type of MACs
- Number of MAC and ports
- Available resources
- Different hardware errata
Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add Frame Manager Multi-User RAM support.
This internal FMan memory block is used by the
FMan hardware modules, the management being made
through the generic allocator.
The FMan Internal memory, for example, is used for
allocating transmit and receive FIFOs.
Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By moving stats update into iptunnel_xmit(), we can simplify
iptunnel_xmit() usage. With this change there is no need to
call another function (iptunnel_xmit_stats()) to update stats
in tunnel xmit code path.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove deprecated module parameters, and mark one parameter as
deprecated.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CLIP is always enabled and hardware uses 2 TID entries instead of 4 for
IPv6 in CLIP mode.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Shenai says:
====================
Update support for T6 adapters
This patch changes updates the various code changes related to
register, stats and hardware related changes for T6 family of
adapters.
This patch series has been created against net-next tree and includes
patches on cxgb4 and cxgb4vf driver.
We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
SGE context congestion map changed from 4 to 8 priority per port
in T6 as there are only 2 channels.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In T6, MPS classification has a 512 deep TCAM to do the match lookup.
Each entry has 80x2b sets containing 48 bit MAC address, port number,
VLAN Valid/ID, VNI, lookup type (outer or inner packet header).
[71:48] bit locations are overloaded for outer vs. inner lookup types.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Updating Congestion Channel/Priority Map in Congestion Manager Context
for T6. In T6 port 0 is mapped to channel 0 and port 1 is mapped to
channel 1. For 2 port T4/T5 adapter, port 0 is mapped to channel 0,1 and
port 1 is mapped to channel 2,3
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ingress padding boundary values got changed for T6.
T5: 0=32B 1=64B 2=128B 3=256B 4=512B 5=1024B 6=2048B 7=4096B
T6: 0=8B 1=16B 2=32B 3=64B 4=128B 5=128B 6=256B 7=512B
Updating the driver to set the correct boundary values in SGE_CONTROL to
32B.
Also, need to take care of this fl alignment change when calculating the
next packet offset.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Updated pm_stats code to display input FIFO wait (index 5) and read
latency (index 7) counters for T6 adapters
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kobj_to_dev has been defined in linux/device.h, so I replace to_dev
with it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 6320 family of switch chips has a second bank for statistics, but
is missing three statistics in the port registers. Generalise and
extend the code:
* adding a field to the statistics table indicating the bank/register
set where each statistics is.
* add a function indicating if an individual statistics
is available on this device
* calculate at run time the sset_count.
* return strings based on the available statistics of the device
* return statistics based on the available statistics of the device
* Add support for reading from the second bank.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward says:
====================
sfc: additional virtual function support
This introduces the client side of a mechanism to defer authorisation of
operations, for example multicast subscription. Although primarily aimed at
SRIOV VFs this can also apply to unprivileged PFs.
Also handle reboot ordering corner cases better and reduce the level of some
logging.
v2: remove #ifdef DEBUG around new WARN_ON in mcdi.c.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Depending on configuration the NIC may return errors for unprivileged
functions and/or VFs. Where these are expected and handled, reduce the
level of any output.
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running in an unprivileged function we expect some MC commands
to fail with permission errors. To avoid log spew downgrade these to
debug only.
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are situations - mostly reset related - where our view of the
filter table differs from the hardware. In this case we may try and
remove filters that aren't actually installed. This isn't that
interesting in most situations, so downgrade the logging.
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For unprivileged functions operations can be authorised by an admin
function. Extra steps are introduced to the MCDI protocol in this
situation - the initial response from the MCDI tells us that the
operation has been deferred, and we must retry when told. We then
receive an event telling us to retry.
Note that this provides only the functionality for the unprivileged
functions, not the handling of the administrative side.
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After reboot the vswitch configuration from the PF may not be
complete before the VF attempts to restore filters. In that
case we see NO_EVB_PORT errors from the MC. Retry up to a time
limit or until a different result is seen.
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Shenai says:
====================
Trivial enhancements for cxgb4
This series adds a debug message if adapter isn't inserted in right PCI
slot. Changes naming conventions for iSCSI rx queues, use node info while
allocating rx queue and use napi_complete_done() api in napi handler.
This patch series has been created against net-next tree and includes
patches on cxgb4 driver.
We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
Thanks
V2: Dropped 'dcb_info' debug entry patch, since the same can be achieved
using lldp tool.
Based on review comments by Or Gerlitz <gerlitz.or@gmail.com> and
David Miller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
All the upper level protocols like rdma, iscsi have their own offload rx
queues, so instead of using the generic naming convention be specific
while naming them. Improves code readability
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check if the device get enough bandwidth from the entire PCI chain to
satisfy its capabilities. This patch determines the PCIe device's
bandwidth capabilities by reading its PCIe Link Capabilities registers
and then call the pcie_get_minimum_link function to ensure that the
adapter is hooked into a slot which is capable of providing the
necessary bandwidth capabilities.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal says:
====================
tcp: honour SO_BINDTODEVICE for TW_RST case too
This is V2, this time as a small series since I followed Erics advice
to split this into smaller chunks, I hope this makes it easier to
review.
First patch adds inet_sk_transparent helper.
Second patch contains an if/else swap that I split from the
original TW_RST v1 one.
Third patch is the actual change without the superfluous sock_net change.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes points out that when we generate tcp reset for timewait sockets we
pretend we found no socket and pass NULL sk to tcp_vX_send_reset().
Make it cope with inet tw sockets and then provide tw sk.
This makes RSTs appear on correct interface when SO_BINDTODEVICE is used.
Packetdrill test case:
// want default route to be used, we rely on BINDTODEVICE
`ip route del 192.0.2.0/24 via 192.168.0.2 dev tun0`
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
// test case still works due to BINDTODEVICE
0.001 setsockopt(3, SOL_SOCKET, SO_BINDTODEVICE, "tun0", 4) = 0
0.100...0.200 connect(3, ..., ...) = 0
0.100 > S 0:0(0) <mss 1460,sackOK,nop,nop>
0.200 < S. 0:0(0) ack 1 win 32792 <mss 1460,sackOK,nop,nop>
0.200 > . 1:1(0) ack 1
0.210 close(3) = 0
0.210 > F. 1:1(0) ack 1 win 29200
0.300 < . 1:1(0) ack 2 win 46
// more data while in FIN_WAIT2, expect RST
1.300 < P. 1:1001(1000) ack 1 win 46
// fails without this change -- default route is used
1.301 > R 1:1(0) win 0
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_md5_do_lookup requires a full socket, so once we extend
_send_reset() to also accept timewait socket we would have to change
if (!sk && hash_location)
to something like
if ((!sk || !sk_fullsock(sk)) && hash_location) {
...
} else {
(sk && sk_fullsock(sk)) tcp_md5_do_lookup()
}
Switch the two branches: check if we have a socket first, then
fall back to a listener lookup if we saw a md5 option (hash_location).
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoids cluttering tcp_v4_send_reset when followup patch extends
it to deal with timewait sockets.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
KASan reported use-after-free for the hwmon structure. So fix this by
using devm_kzalloc and let the core take care about freeing the memory
during device dettach.
Reported-by: Ido Schimmel <idosch@mellanox.com>
Fixes: 89309da39 ("mlxsw: core: Implement temperature hwmon interface")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When closing a listen socket, tcp_abort currently calls
tcp_done without clearing the request queue. If the socket has a
child socket that is established but not yet accepted, the child
socket is then left without a parent, causing a leak.
Fix this by setting the socket state to TCP_CLOSE and calling
inet_csk_listen_stop with the socket lock held, like tcp_close
does.
Tested using net_test. With this patch, calling SOCK_DESTROY on a
listen socket that has an established but not yet accepted child
socket results in the parent and the child being closed, such
that they no longer appear in sock_diag dumps.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add another sysfs hwmon attribute to expose possibility to reset
temperature sensors history.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
