Commit Graph

179 Commits

Author SHA1 Message Date
Christoph Hellwig
651a013649 scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough
Simplify the SMP passthrough code by switching it to the generic bsg-lib
helpers that abstract away the details of the request code, and gets
drivers out of seeing struct scsi_request.

For the libsas host SMP code there is a small behavior difference in
that we now always clear the residual len for successful commands,
similar to the three other SMP handler implementations.  Given that
there is no partial command handling in the host SMP handler this should
not matter in practice.

[mkp: typos and checkpatch fixes]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-29 21:51:45 -04:00
Colin Ian King
bbaf61e2e9 scsi: mpt3sas: fix pr_info message continuation
An optional discovery status should be printed with a pr_cont and needs
a leading space to make it more readable. The final new line should also
be a pr_cont and the indentation is out by one, so fix that too.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:28:59 -04:00
Christophe JAILLET
a5dd7efd35 scsi: mpt3sas: Fix memory allocation failure test in 'mpt3sas_base_attach()'
In the lines above this test, 8 'kzalloc' are performed, but only 7
results are tested.

Add the missing one (i.e. '!ioc->port_enable_cmds.reply').

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-10 19:36:51 -04:00
Arnd Bergmann
bbfd8e8b24 scsi: mpt3sas: fix format overflow warning
We print the driver name into one string and then add and ID
and copy it into a second string of the same length, at which
point gcc complains about a possible overflow:

drivers/scsi/mpt3sas/mpt3sas_scsih.c: In function '_scsih_probe':
drivers/scsi/mpt3sas/mpt3sas_scsih.c:8884:21: error: '_cm' directive writing 3 bytes into a region of size between 1 and 32 [-Werror=format-overflow=]
printf(ioc->name, "%s_cm%d", ioc->driver_name, ioc->id);
                  ^~~~~~~~~
drivers/scsi/mpt3sas/mpt3sas_scsih.c:8884:21: note: directive argument in the range [0, 255]
drivers/scsi/mpt3sas/mpt3sas_scsih.c:8884:2: note: 'sprintf' output between 5 and 38 bytes into a destination of size 32
  sprintf(ioc->name, "%s_cm%d", ioc->driver_name, ioc->id);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Making the first string shorter is sufficient to avoid the
warning here, as we know it can only contain either "mpt2sas"
or "mpt3sas".

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-07 14:04:01 -04:00
Romain Perier
e9d984182a scsi: mpt3sas: Replace PCI pool old API
The PCI pool API is deprecated. This commit replaces the PCI pool old
API by the appropriate function with the DMA pool API.

Signed-off-by: Romain Perier <romain.perier@collabora.com>
Reviewed-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-07 14:04:01 -04:00
Bart Van Assche
43f7571be0 scsi: Create two versions of scsi_internal_device_unblock()
This will make it easier to serialize SCSI device state changes through
a mutex.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:55:59 -04:00
Bart Van Assche
551eb598e5 scsi: Split scsi_internal_device_block()
Instead of passing a "wait" argument to scsi_internal_device_block(),
split this function into a function that waits and a function that
doesn't wait. This will make it easier to serialize SCSI device state
changes through a mutex.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:55:58 -04:00
Stephen Boyd
ad61dd303a scripts/spelling.txt: add regsiter -> register spelling mistake
This typo is quite common.  Fix it and add it to the spelling file so
that checkpatch catches it earlier.

Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 17:15:13 -07:00
Linus Torvalds
8d5e72dfdf SCSI misc on 20170503
This update includes the usual round of major driver updates
 (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex).  There's also
 the usual amount of cosmetic and spelling stuff.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZClQkAAoJEAVr7HOZEZN4OmkP/j/JJx2ImGzTgil5S8yeSWPY
 5Gqb8IK9rCQ+OJgCZYCz3JsLZZnwY4ODZ9tC1lO/3he6VfjIhcEs2/eXbTnEfsZx
 D3EwWEVR3wYBNZN0d4hQoudVbdCf6UuvsUvM1hDFO7by10qFEs0DqsufccpDlpG/
 us96BWf7PgiNzHYSvZIlmsfEDzNDRRg7Dm1NuLOQvXw56zFGsrysCO6Tqg7/ScJm
 Unz/VlEe1DE7zE9QotsKNCht7xHkmn1vfuva1wqG2wMp7EHf0rKnavRYrWUrxiEy
 2ig6GpR7mIHmVHS8PAMNhyS6iNxGQ3e50sAvZdqDlq42P73AEwbrOo5YhgsTJxWT
 vCpRAzSuHwPOPY3W2Aa1yJ10iOpoPKxXs2xSZuzpcz8XJ3RjHy+l90Y0VT4Jrvzv
 +dSY1cynshFccZmw2HQanlt1Ly9G3U8xmx8KIbnsIPCdSIQaQQD27H+Ip0YZ0fKt
 aLmMcQzffma3UP/LPmRAQ45bwx8rLi9M3DWbWOGmSkIRY3etPCXqNuDcC6h5p9TF
 4W74oVcELTql/u8ATZNSbdHBsWAg3GATIkAgdqwLTk/CU/0OgGY8epILr3EM2bc6
 vVbglwP9DiyVOikTLhVNJdZA97qHjZ1WXNo03eefFTBfPDcUlkZw4j2gufGuNFh2
 5vA4C/aSl9uxaLInr3aC
 =kj7u
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates
  (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex). There's also the
  usual amount of cosmetic and spelling stuff"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (155 commits)
  scsi: qla4xxx: fix spelling mistake: "Tempalate" -> "Template"
  scsi: stex: make S6flag static
  scsi: mac_esp: fix to pass correct device identity to free_irq()
  scsi: aacraid: pci_alloc_consistent() failures on ARM64
  scsi: ufs: make ufshcd_get_lists_status() register operation obvious
  scsi: ufs: use MASK_EE_STATUS
  scsi: mac_esp: Replace bogus memory barrier with spinlock
  scsi: fcoe: make fcoe_e_d_tov and fcoe_r_a_tov static
  scsi: sd_zbc: Do not write lock zones for reset
  scsi: sd_zbc: Remove superfluous assignments
  scsi: sd: sd_zbc: Rename sd_zbc_setup_write_cmnd
  scsi: Improve scsi_get_sense_info_fld
  scsi: sd: Cleanup sd_done sense data handling
  scsi: sd: Improve sd_completed_bytes
  scsi: sd: Fix function descriptions
  scsi: mpt3sas: remove redundant wmb
  scsi: mpt: Move scsi_remove_host() out of mptscsih_remove_host()
  scsi: sg: reset 'res_in_use' after unlinking reserved array
  scsi: mvumi: remove code handling zero scsi_sg_count(scmd) case
  scsi: fusion: fix spelling mistake: "Persistancy" -> "Persistency"
  ...
2017-05-04 12:19:44 -07:00
Sinan Kaya
b1391a5bf8 scsi: mpt3sas: remove redundant wmb
Due to relaxed ordering requirements on multiple architectures, drivers
are required to use wmb/rmb/mb combinations when they need to guarantee
observability between the memory and the HW.

The mpt3sas driver is already using wmb() for this purpose.  However, it
issues a writel following wmb(). writel() function on arm/arm64
arhictectures have an embedded wmb() call inside.

This results in unnecessary performance loss and code duplication.

writel already guarantees ordering for both cpu and bus. we don't need
additional wmb()

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-24 18:31:41 -04:00
Johannes Thumshirn
c5ce0abeb6 scsi: sas: move scsi_remove_host call into sas_remove_host
Move scsi_remove_host call into sas_remove_host and remove it from SAS
HBA drivers, so we don't mess up the ordering. This solves an issue with
double deleting sysfs entries that was introduced by the change of sysfs
behaviour from commit bcdde7e221 ("sysfs: make __sysfs_remove_dir()
recursive").

[mkp: addressed checkpatch complaints]

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Cc: Jinpu Wang <jinpu.wang@profitbricks.com>
Cc: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinpu Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-21 10:34:29 -04:00
James Bottomley
e2a3a67302 Merge remote-tracking branch 'mkp-scsi/fixes' into fixes 2017-03-07 15:13:02 -08:00
Linus Torvalds
a3b4924b02 SCSI misc on 20170303
This is the set of stuff that didn't quite make the initial pull and a
 set of fixes for stuff which did.  The new stuff is basically lpfc
 (nvme), qedi and aacraid.  The fixes cover a lot of previously
 submitted stuff, the most important of which probably covers some of
 the failing irq vectors allocation and other fallout from having the
 SCSI command allocated as part of the block allocation functions.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJYug/3AAoJEAVr7HOZEZN4bRwP/RvAW/NWlvs812gUeHNahUHx
 HF3EtY5YHneZev1L4fa1Myd8cNcB3gic53e1WvQhN5f+LczeI7iXHH8xIQK/B4GT
 OI5W7ZCGlhIamgsU8tUFGrtIOM6N/LIMZPMsaE62dcev0jC0Db4p/5yv5bUg1yuL
 JOLWqIaTYTx7b5FwR2cXKv7KGYpXonvcoVUDV6s8aMYToJhJiQ6JtWmjaAA+/OJ7
 HTcqNX/KSWQBG3ERjE3A/rGBFxPR9KPq8kpqVJlw39KEN9tMjXb0QAGvAeauNye2
 xaIjV41tXH1Ys3aoh6ZU+TpzN3HLlH/gegRe8671fUwqu/RnSzFC8Eidoddzgqne
 z5BF0Dy36FA5ol2HTFEwS5WM1gRM+z6YGnbhpE/XfyTL2sLHRynSXKxb02IdjRNi
 gCdV89AL8xdfPPFJjsx4hGWUJhalW/RwuPayAupePKGQHePabHa19McI2ssg0WBg
 OC6uuEk7vT95xuTZVJlrwXTJPnc9dxWJwzh21oEnvMfWM0VMW06EKT4AcX8FOsjL
 RswiYp9wl8JDmfNxyJnQJj0+QXeIE/gh35vBQCGsLVKY4+xzbi3yZfb1sZB0XOum
 yLK2LFQ+Ltk1TaPPSZsgXQZfodot0dFJPTnWr+whOfY1kepNlFRwQHltXnCWzgRs
 QG//WHsk0u1Mj2gehwmQ
 =e+6v
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This is the set of stuff that didn't quite make the initial pull and a
  set of fixes for stuff which did.

  The new stuff is basically lpfc (nvme), qedi and aacraid. The fixes
  cover a lot of previously submitted stuff, the most important of which
  probably covers some of the failing irq vectors allocation and other
  fallout from having the SCSI command allocated as part of the block
  allocation functions"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (59 commits)
  scsi: qedi: Fix memory leak in tmf response processing.
  scsi: aacraid: remove redundant zero check on ret
  scsi: lpfc: use proper format string for dma_addr_t
  scsi: lpfc: use div_u64 for 64-bit division
  scsi: mac_scsi: Fix MAC_SCSI=m option when SCSI=m
  scsi: cciss: correct check map error.
  scsi: qla2xxx: fix spelling mistake: "seperator" -> "separator"
  scsi: aacraid: Fixed expander hotplug for SMART family
  scsi: mpt3sas: switch to pci_alloc_irq_vectors
  scsi: qedf: fixup compilation warning about atomic_t usage
  scsi: remove scsi_execute_req_flags
  scsi: merge __scsi_execute into scsi_execute
  scsi: simplify scsi_execute_req_flags
  scsi: make the sense header argument to scsi_test_unit_ready mandatory
  scsi: sd: improve TUR handling in sd_check_events
  scsi: always zero sshdr in scsi_normalize_sense
  scsi: scsi_dh_emc: return success in clariion_std_inquiry()
  scsi: fix memory leak of sdpk on when gd fails to allocate
  scsi: sd: make sd_devt_release() static
  scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.
  ...
2017-03-03 21:36:56 -08:00
Bart Van Assche
8893cf6cb1 scsi: mpt3sas: Avoid sleeping in interrupt context
Commit 669f044170 ("scsi: srp_transport: Move queuecommand() wait code
to SCSI core") can make scsi_internal_device_block() sleep.  However,
the mpt3sas driver can call this function from an interrupt
handler. Hence add a second argument to scsi_internal_device_block()
that restores the old behavior of this function for the mpt3sas handler.

The call chain that triggered an "IRQ handler enabled interrupts"
complaint is as follows:

_base_interrupt()
-> _base_async_event()
   -> mpt3sas_scsih_event_callback()
      -> _scsih_check_topo_delete_events()
         -> _scsih_block_io_to_children_attached_directly()
            -> _scsih_block_io_device()
               -> _scsih_internal_device_block()
                  -> scsi_internal_device_block()

Reported-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Omar Sandoval <osandov@osandov.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Cc: <stable@vger.kernel.org> # v4.10+
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-01 21:52:13 -05:00
Damien Le Moal
c46f09175d scsi: sd: Check for unaligned partial completion
Commit <f2e767bb5d6e> ("mpt3sas: Force request partial completion
alignment") was not considering the case of commands not operating on
logical block size units (e.g. REQ_OP_ZONE_REPORT and its 64B aligned
partial replies). In this case, forcing alignment of resid to the device
logical block size can break the command result, e.g. in the case of
REQ_OP_ZONE_REPORT, the exact number of zone reported by the device.

Move the partial completion alignement check of mpt3sas to a generic
implementation in sd_done(). The check is added within the default
section of the initial req_op() switch case so that the report and reset
zone commands are ignored. In addition, as sd_done() is not called for
passthrough requests, resid corrections are not done as intended by the
initial mpt3sas patch.

Fixes: f2e767bb5d ("mpt3sas: Force request partial completion alignment")
Cc: <stable@vger.kernel.org> # v4.10
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-01 21:46:11 -05:00
Masahiro Yamada
9a284e5c9e scripts/spelling.txt: add "overwritting" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  overwritting||overwriting

Link: http://lkml.kernel.org/r/1481573103-11329-29-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Hannes Reinecke
1d55abc0e9 scsi: mpt3sas: switch to pci_alloc_irq_vectors
Cleanup the MSI-X handling allowing us to use the PCI-layer provided
vector allocation.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-23 17:01:05 -05:00
Linus Torvalds
cdc194705d SCSI misc on 20170220
This update includes the usual round of major driver updates (ncr5380,
 ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid,
 megaraid_sas, ).  There's also an assortment of minor fixes and the
 major update of switching a bunch of drivers to pci_alloc_irq_vectors
 from Christoph.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJYq5adAAoJEAVr7HOZEZN4bjUP/Atk7CSZVnC75pcYmncbEGCx
 ysOlEHK4uW2HhiAYk3PlYMk+pKrMHet2zsbbM9PHJfopdOHZ7Sq1+UZZVeqE1Zun
 8pe0NhON+fZx7XAnevdEvnSSULQZ+AGfjZO72iUwkJiN3ozYaFtCITOyn49l4GpR
 ra9emskBh7CQOFW2voGn1AKeDijPYGx3+TO4AUrWjVMiByR06gb1bmImx+ljiUrs
 jzRJPfrt90ORcTdpMateyN2EXxudcASMhX03SJ6fRI84hPAhMCROMbTv8RnzOTE4
 DPbnvbYUowlHt43iUhJHSwGdkRRaRBnkzQENBp1fNrNzZgF6vB7+kShxbonrYB2p
 gC4ewaJr0BNj+HsUnvTpe3WseiPOcfsnBsKilPLKBlm2dCKEXqFox/dj/T1uexxg
 HoyFrl3u8fyEqVHrzRS4M9t/njWh0NFmXxb0wBdj+lkVFTRErGSKQ8SfOqshuSGs
 P8NN88jy8vC7uqgzKBJ+UH3ehzn3qfBxasFHIC/e2awY9FqKjHGTxKMmSVpjXVxy
 wCvE2FQ3k/qEj2XSM6f7/NGytlSOlju5q1rFtHPW2M+TFSh0LJWCnmVjR/Zle9em
 pBWmtIgCv8W5b41zL2H94nLWAZbfdrrNU/XnX88l47LKnmorte/PGhpxu36NEsMS
 VCgreQmFMdMRY+WzDWl1
 =cBQx
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates (ncr5380,
  ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid,
  megaraid_sas, ...).

  There's also an assortment of minor fixes and the major update of
  switching a bunch of drivers to pci_alloc_irq_vectors from Christoph"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (188 commits)
  scsi: megaraid_sas: handle dma_addr_t right on 32-bit
  scsi: megaraid_sas: array overflow in megasas_dump_frame()
  scsi: snic: switch to pci_irq_alloc_vectors
  scsi: megaraid_sas: driver version upgrade
  scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2
  scsi: megaraid_sas: Indentation and smatch warning fixes
  scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints
  scsi: megaraid_sas: Increase internal command pool
  scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to complete
  scsi: megaraid_sas: Bail out the driver load if ld_list_query fails
  scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return void
  scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR
  scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool
  scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion
  scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zero
  scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicate
  scsi: megaraid_sas: update can_queue only if the new value is less
  scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functions
  scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID
  scsi: megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD
  ...
2017-02-21 11:51:42 -08:00
Jens Axboe
818551e2b2 Merge branch 'for-4.11/next' into for-4.11/linus-merge
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17 14:08:19 -07:00
ojab
ffdadd68af scsi: mpt3sas: disable ASPM for MPI2 controllers
MPI2 controllers sometimes got lost (i.e. disappear from
/sys/bus/pci/devices) if ASMP is enabled.

Signed-off-by: Slava Kardakov <ojab@ojab.ru>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60644
Cc: <stable@vger.kernel.org>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-09 18:54:12 -05:00
Ram Pai
f2e767bb5d scsi: mpt3sas: Force request partial completion alignment
The firmware or device, possibly under a heavy I/O load, can return on a
partial unaligned boundary. Scsi-ml expects these requests to be
completed on an alignment boundary. Scsi-ml blindly requeues the I/O
without checking the alignment boundary of the I/O request for the
remaining bytes. This leads to errors, since devices cannot perform
non-aligned read/write operations.

This patch fixes the issue in the driver. It aligns unaligned
completions of FS requests, by truncating them to the nearest alignment
boundary.

[mkp: simplified if statement]

Reported-by: Mauricio Faria De Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-31 22:36:53 -05:00
Chaitra P B
7cfa76963f scsi: mpt3sas: Updating driver version to v15.100.00.00
Updated driver version to "15.100.00.00"

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-31 22:03:36 -05:00
Chaitra P B
6b4c335a0f scsi: mpt3sas: Fix Firmware fault state 0x2100 during heavy 4K RR FIO stress test.
Due existence of loop in the IO path our HBA will receive heavy IOs and
also as driver is not updating the Reply Post Host Index frequently, So
there will be a high chance that our Firmware unable to find any free
entry in the Reply Post Descriptor Queue (i.e. Queue overflow occurs)
and can observe 0x2100 firmware fault.  So to fix this, we have defined
a thresh hold value. After continuously processing this thresh hold
number of reply descriptors driver will update the Reply Descriptor Host
Index so that this thresh hold number of reply descriptors entries will
be freed and these entries will be available for firmware and we won't
observe this Firmware fault. We have defined this threshold value as
1/3rd of the hba queue depth.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-31 22:03:35 -05:00
Chaitra P B
459325c466 scsi: mpt3sas: Fix for Crusader to achieve product targets with SAS devices.
Small glitch/degraded performance in Crusader is improved with SAS
drives by removing unnecessary spinlocks while clearing scsi command in
drivers internal lookup table.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-31 22:03:35 -05:00
Chaitra P B
6c44c0fe91 scsi: mpt3sas: Added print to notify cable running at a degraded speed.
Driver processes the event MPI26_EVENT_ACTIVE_CABLE_DEGRADED when a
cable is present and is running at a degraded speed (below the SAS3 12
Gb/s rate). Prints added to inform the user that the cable is not
running at optimal speed.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-31 22:03:35 -05:00
Christoph Hellwig
82ed4db499 block: split scsi_request out of struct request
And require all drivers that want to support BLOCK_PC to allocate it
as the first thing of their private data.  To support this the legacy
IDE and BSG code is switched to set cmd_size on their queues to let
the block layer allocate the additional space.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27 15:08:35 -07:00
James Bottomley
ffb5845658 scsi: mpt3sas: fix hang on ata passthrough commands
mpt3sas has a firmware failure where it can only handle one pass through
ATA command at a time.  If another comes in, contrary to the SAT
standard, it will hang until the first one completes (causing long
commands like secure erase to timeout).  The original fix was to block
the device when an ATA command came in, but this caused a regression
with

commit 669f044170
Author: Bart Van Assche <bart.vanassche@sandisk.com>
Date:   Tue Nov 22 16:17:13 2016 -0800

    scsi: srp_transport: Move queuecommand() wait code to SCSI core

So fix the original fix of the secure erase timeout by properly
returning SAM_STAT_BUSY like the SAT recommends.  The original patch
also had a concurrency problem since scsih_qcmd is lockless at that
point (this is fixed by using atomic bitops to set and test the flag).

[mkp: addressed feedback wrt. test_bit and fixed whitespace]

Fixes: 18f6084a98 (mpt3sas: Fix secure erase premature termination)
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-17 14:36:57 -05:00
Adam Manzanares
307d9075a0 scsi: mpt3sas: Recognize and act on iopriority info
This patch adds support for request iopriority handling in the mpt3sas
layer. This works only when a ATA device is behind the SATL. The ATA
device also has to indicate that it supports command priorities in the
identify information that is pulled from the SATL.

Signed-off-by: Adam Manzanares <adam.manzanares@wdc.com>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-14 15:40:38 -05:00
Linus Torvalds
a829a8445f SCSI misc on 20161213
This update includes the usual round of major driver updates (ncr5380,
 lpfc, hisi_sas, megaraid_sas, ufs, ibmvscsis, mpt3sas).  There's also
 an assortment of minor fixes, mostly in error legs or other not very
 user visible stuff.  The major change is the pci_alloc_irq_vectors
 replacement for the old pci_msix_.. calls; this effectively makes IRQ
 mapping generic for the drivers and allows blk_mq to use the
 information.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJYUJOvAAoJEAVr7HOZEZN42B0P/1lj1W2N7y0LOAbR2MasyQvT
 fMD/SSip/v+R/zJiTv+5M/IDQT6ez62JnQGWyX3HZTob9VEfoqagbUuHH6y+fmib
 tHyqiYc9FC/NZSRX/0ib+rpnSVhC/YRSVV7RrAqilbpOKAzeU25FlN/vbz+Nv/XL
 ReVBl+2nGjJtHyWqUN45Zuf74c0zXOWPPUD0hRaNclK5CfZv5wDYupzHzTNSQTkj
 nWvwPYT0OgSMNe7mR+IDFyOe3UQ/OYyeJB0yBNqO63IiaUabT8/hgrWR9qJAvWh8
 LiH+iSQ69+sDUnvWvFjuls/GzcFuuTljwJbm+FyTsmNHONPVY8JRCLNq7CNDJ6Vx
 HwpNuJdTSJpne4lAVBGPwgjs+GhlMvUP/xYVLWAXdaBxU9XGePrwqQDcFu1Rbx3P
 yfMiVaY1+e45OEjLRCbDAwFnMPevC3kyymIvSsTySJxhTbYrOsyrrWt5kwWsvE3r
 SKANsub+xUnpCkyg57nXRQStJSCiSfGIDsydKmMX+pf1SR4k6gCUQZlcchUX0uOa
 dcY6re0c7EJIQQiT7qeGP5TRBblxARocCA/Igx6b5U5HmuQ48tDFlMCps7/TE84V
 JBsBnmkXcEi/ALShL/Tui+3YKA1DfOtEnwHtXx/9Ecx/nxP2Sjr9LJwCKiONv8NY
 RgLpGfccrix34lQumOk5
 =sPXh
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates (ncr5380,
  lpfc, hisi_sas, megaraid_sas, ufs, ibmvscsis, mpt3sas).

  There's also an assortment of minor fixes, mostly in error legs or
  other not very user visible stuff. The major change is the
  pci_alloc_irq_vectors replacement for the old pci_msix_.. calls; this
  effectively makes IRQ mapping generic for the drivers and allows
  blk_mq to use the information"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (256 commits)
  scsi: qla4xxx: switch to pci_alloc_irq_vectors
  scsi: hisi_sas: support deferred probe for v2 hw
  scsi: megaraid_sas: switch to pci_alloc_irq_vectors
  scsi: scsi_devinfo: remove synchronous ALUA for NETAPP devices
  scsi: be2iscsi: set errno on error path
  scsi: be2iscsi: set errno on error path
  scsi: hpsa: fallback to use legacy REPORT PHYS command
  scsi: scsi_dh_alua: Fix RCU annotations
  scsi: hpsa: use %phN for short hex dumps
  scsi: hisi_sas: fix free'ing in probe and remove
  scsi: isci: switch to pci_alloc_irq_vectors
  scsi: ipr: Fix runaway IRQs when falling back from MSI to LSI
  scsi: dpt_i2o: double free on error path
  scsi: cxlflash: Migrate scsi command pointer to AFU command
  scsi: cxlflash: Migrate IOARRIN specific routines to function pointers
  scsi: cxlflash: Cleanup queuecommand()
  scsi: cxlflash: Cleanup send_tmf()
  scsi: cxlflash: Remove AFU command lock
  scsi: cxlflash: Wait for active AFU commands to timeout upon tear down
  scsi: cxlflash: Remove private command pool
  ...
2016-12-14 10:49:33 -08:00
Suganath Prabu S
7ff723ad0f scsi: mpt3sas: Unblock device after controller reset
While issuing any ATA passthrough command to firmware the driver will
block the device. But it will unblock the device only if the I/O
completes through the ISR path. If a controller reset occurs before
command completion the device will remain in blocked state.

Make sure we unblock the device following a controller reset if an ATA
passthrough command was queued.

[mkp: clarified patch description]

Cc: <stable@vger.kernel.org> # v4.4+
Fixes: ac6c2a93bd07 ("mpt3sas: Fix for SATA drive in blocked state, after diag reset")
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-22 17:18:08 -05:00
Andrey Grodzovsky
18f6084a98 scsi: mpt3sas: Fix secure erase premature termination
This is a work around for a bug with LSI Fusion MPT SAS2 when perfoming
secure erase. Due to the very long time the operation takes, commands
issued during the erase will time out and will trigger execution of the
abort hook. Even though the abort hook is called for the specific
command which timed out, this leads to entire device halt
(scsi_state terminated) and premature termination of the secure erase.

Set device state to busy while ATA passthrough commands are in progress.

[mkp: hand applied to 4.9/scsi-fixes, tweaked patch description]

Signed-off-by: Andrey Grodzovsky <andrey2805@gmail.com>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Cc: <linux-scsi@vger.kernel.org>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-12 10:25:37 -05:00
Colin Ian King
6c7abffc7f scsi: mpt3sas: fix some spelling mistakes in message and comments
Trivial fixes, minor spelling mistakes in comments and in a KERN_INFO
message.

[mkp: fixed spelling mistake in patch description]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 18:16:31 -05:00
Suganath Prabu Subramani
6b64b286c8 scsi: mpt3sas: Bump driver version as "14.101.00.00"
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:30:00 -05:00
Suganath Prabu Subramani
aa53bb8952 scsi: mpt3sas: Fix for Endianness issue.
Use le16_to_cpu only for accessing two byte data provided by controller.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:30:00 -05:00
Suganath Prabu Subramani
81c16f8323 scsi: mpt3sas: Use the new MPI 2.6 32-bit Atomic Request Descriptors for SAS35 devices.
Support Atomic Request Descriptors for Ventura/SAS35 devices.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:29:59 -05:00
Suganath Prabu Subramani
186a18e51d scsi: mpt3sas: set EEDP-escape-flags for SAS35 devices.
An UNMAP command on a PI formatted device will leave the Logical Block
Application Tag and Logical Block Reference Tag as all F's (for those LBAs
that are unmapped). To avoid IO errors if those LBAs are subsequently read
before they are written with valid tag fields, the MPI SCSI IO requests
need to set the EEDPFlags element EEDP Escape Mode field, Bits [7:6]
appropriately. A value of 2 should be set to disable all PI checks if the
Logical Block Application Tag is 0xFFFF for PI types 1 and 2.  A value
of 3 should be set to disable all PI checks if the Logical Block
Application Tag is 0xFFFF and the Logical Block Reference Tag is
0xFFFFFFFF for PI type 3.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:29:59 -05:00
Suganath Prabu Subramani
0bb337c97c scsi: mpt3sas: Increased/Additional MSIX support for SAS35 devices.
For SAS35 devices MSIX vectors are inceased to 128 from 96. To support this
Reply post host index register count is increased to 16. Also variable
msix96_vector is replaced with combined_reply_queue and variable
combined_reply_index_count is added to set different values for SAS3 and
SAS35 devices.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:29:59 -05:00
Suganath Prabu Subramani
998f26aedf scsi: mpt3sas: Added Device ID's for SAS35 devices and updated MPI header.
Added Device ID's for SAS35 devices (Ventura, Crusader, Harpoon &
Tomcat) and updated mpi header file for the same. Also added
"is_gen35_ioc" to MPT3SAS_ADAPTER structure for identifying SAS35 adapters.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:29:59 -05:00
Suganath Prabu Subramani
e270263ec1 scsi: mpt3sas: Bump driver version as "14.100.00.00"
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:29:59 -05:00
Suganath Prabu Subramani
58e2fe7afe scsi: mpt3sas: Remove unused macro "MPT_DEVICE_TLR_ON"
Removing macro "MPT_DEVICE_TLR_ON" defined in header file as its unused

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:29:59 -05:00
Suganath Prabu Subramani
c696f7b83e scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path
When device missing event arrives, device_remove_in_progress bit will be
set and hence driver has to stop sending IOCTL commands.Now the check has
been added in IOCTL path to test device_remove_in_progress bit is set, if
so then IOCTL will be failed printing failure message.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:29:59 -05:00
Suganath Prabu Subramani
bb35066123 scsi: mpt3sas: Fix for incorrect numbers for MSIX vectors enabled when non RDPQ card is enumerated first.
No. of MSIX vectors supported = min (Total no. of CPU cores,
MSIX vectors supported by card)

when RDPQ is disabled "max_msix_vectors" module parameter which was
declared as global was set to '8' and hence if there are more than one card
in system among which if RDPQ disabled card is enumerated first then only 8
MSIX vectors was getting enabled for all the cards(including RDPQ enabled
card,which can support more than 8 MSIX vectors).

Used local variable instead of global variable ,if RDPQ is disabled this
local variable is set to '8' else it is set to "max_msix_vectors" (by
default this is set to -1, whose value can be set by user during driver
load time).So now regardless of whether RDPQ disabled card is enumerated
first or RDPQ enabled card is enumerated first , MSIX vectors enabled
depends on the cards capability.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:29:59 -05:00
Suganath Prabu Subramani
b2fe6be798 scsi: mpt3sas: Fix for improper info displayed in var log, while blocking or unblocking the device.
Return value and Device_handle Arguments passed in correct order
 to match with its format string.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:29:59 -05:00
Sreekanth Reddy
6d3a56ed09 scsi: mpt3sas: Fix for block device of raid exists even after deleting raid disk
While merging mpt3sas & mpt2sas code, we added the is_warpdrive check
condition on the wrong line

---------------------------------------------------------------------------
 scsih_target_alloc(struct scsi_target *starget)
                        sas_target_priv_data->handle = raid_device->handle;
                        sas_target_priv_data->sas_address = raid_device->wwid;
                        sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
-                       raid_device->starget = starget;
+                       sas_target_priv_data->raid_device = raid_device;
+                       if (ioc->is_warpdrive)
+                               raid_device->starget = starget;
                }
                spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
                return 0;
------------------------------------------------------------------------------

That check should be for the line sas_target_priv_data->raid_device =
raid_device;

Due to above hunk, we are not initializing raid_device's starget for
raid volumes, and so during raid disk deletion driver is not calling
scsi_remove_target() API as driver observes starget field of
raid_device's structure as NULL.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Cc: <stable@vger.kernel.org> # v4.4+
Fixes: 7786ab6aff ("mpt3sas: Ported WarpDrive product SSS6200 support")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-01 13:31:22 -04:00
Linus Torvalds
4dfddf5036 SCSI misc on 20161006
This update includes the usual round of major driver updates (hpsa, be2iscsi,
 hisi_sas, zfcp, cxlflash).  There's a new incarnation of hpsa called smartpqi
 for which a driver is added, there's some cleanup work of the ibm vscsi target
 and updates to libfc, plus a whole host of minor fixes and updates and finally
 the removal of several ISA drivers which seem not to have been used for years.
 
 Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJX9fZGAAoJEAVr7HOZEZN4TfkP/2bOHBGqyQ16P9jRjWXtC6pJ
 Fp/ZfU6ZrSpcGN49Wr9vyPbpvYKdtIZg3oUs6XhKmnfP+lbeIIJ5jxlEnwBVwWya
 JOOD91o8lLN7zRMuyfYIfgnm4dIU3GSLpnWIyfAhoMH1utiLLcq7s2XEM5girDft
 dVUL20XprtJkVsg2C+hhRAI8PMjWFInadj2eRIHdxJIDC8fXR+w8ojBShou+lf6Q
 /zYPgckTCBlZWIc/ohI3j52r4qmkChgX+3/jR+v9i5bGXjFfpmh0GzxM7tscESSa
 4Y/ZLTg72j/colYkA1jt04YLxA2dQCa6b8DmJIcUTL0WStsJUQH5hFFFHt3mSafI
 HirqRfHpmadHbfi5Kiyx688S5b0oVN4bMxvMoEOAUy7WVaLEr84GJ5VYhoAwkPhL
 USaDx6Hsa1OT0lGYAtyRKOUT/d55grztEOnSxBFiQgRoB8wrGX616Xg8VONy7JZS
 wEZtf1v5K0+ZXJiu4NtY+/RzQdOwu7OQHKfN5mLri8tJ+eo8d88ZwSARJxEZetSM
 P4EVR2ZjhL+Ct78v3i4Yj8FVMXHSzzulj530KQ/U7z/l4c2S54mtEKijDmXmto8k
 baiIah/wgaS/fznoOsJw+Iy/2HqsAtNZsReNcgNPLzfabTBXKSBXJDLmO4d3g/3s
 zwj1m3JtzAx2j3kQrkSv
 =cyTO
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates (hpsa,
  be2iscsi, hisi_sas, zfcp, cxlflash). There's a new incarnation of hpsa
  called smartpqi for which a driver is added, there's some cleanup work
  of the ibm vscsi target and updates to libfc, plus a whole host of
  minor fixes and updates and finally the removal of several ISA drivers
  which seem not to have been used for years"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (173 commits)
  scsi: mvsas: Mark symbols static where possible
  scsi: pm8001: Mark symbols static where possible
  scsi: arcmsr: Simplify user_len checking
  scsi: fcoe: fix off by one in eth2fc_speed()
  scsi: dtc: remove from tree
  scsi: t128: remove from tree
  scsi: pas16: remove from tree
  scsi: u14-34f: remove from tree
  scsi: ultrastor: remove from tree
  scsi: in2000: remove from tree
  scsi: wd7000: remove from tree
  scsi: scsi_dh_alua: Fix memory leak in alua_rtpg()
  scsi: lpfc: Mark symbols static where possible
  scsi: hpsa: correct call to hpsa_do_reset
  scsi: ufs: Get a TM service response from the correct offset
  scsi: ibmvfc: Fix I/O hang when port is not mapped
  scsi: megaraid_sas: clean function declarations in megaraid_sas_base.c up
  scsi: ipr: Remove redundant messages at adapter init time
  scsi: ipr: Don't log unnecessary 9084 error details
  scsi: smartpqi: raid bypass lba calculation fix
  ...
2016-10-07 09:28:53 -07:00
Greg Edwards
ce7c6c9e1d mpt3sas: Fix resume on WarpDrive flash cards
mpt3sas crashes on resume after suspend with WarpDrive flash cards.  The
reply_post_host_index array is not set back up after the resume, and we
deference a stale pointer in _base_interrupt().

[   47.309711] BUG: unable to handle kernel paging request at ffffc90001f8006c
[   47.318289] IP: [<ffffffffc00863ef>] _base_interrupt+0x49f/0xa30 [mpt3sas]
[   47.326749] PGD 41ccaa067 PUD 41ccab067 PMD 3466c067 PTE 0
[   47.333848] Oops: 0002 [#1] SMP
...
[   47.452708] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.7.0 #6
[   47.460506] Hardware name: Dell Inc. OptiPlex 990/06D7TR, BIOS A18 09/24/2013
[   47.469629] task: ffffffff81c0d500 ti: ffffffff81c00000 task.ti: ffffffff81c00000
[   47.479112] RIP: 0010:[<ffffffffc00863ef>]  [<ffffffffc00863ef>] _base_interrupt+0x49f/0xa30 [mpt3sas]
[   47.490466] RSP: 0018:ffff88041d203e30  EFLAGS: 00010002
[   47.497801] RAX: 0000000000000001 RBX: ffff880033f4c000 RCX: 0000000000000001
[   47.506973] RDX: ffffc90001f8006c RSI: 0000000000000082 RDI: 0000000000000082
[   47.516141] RBP: ffff88041d203eb0 R08: ffff8804118e2820 R09: 0000000000000001
[   47.525300] R10: 0000000000000001 R11: 00000000100c0000 R12: 0000000000000000
[   47.534457] R13: ffff880412c487e0 R14: ffff88041a8987d8 R15: 0000000000000001
[   47.543632] FS:  0000000000000000(0000) GS:ffff88041d200000(0000) knlGS:0000000000000000
[   47.553796] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   47.561632] CR2: ffffc90001f8006c CR3: 0000000001c06000 CR4: 00000000000406f0
[   47.570883] Stack:
[   47.575015]  000000001d211228 ffff88041d2100c0 ffff8800c47d8130 0000000000000100
[   47.584625]  ffff8804100c0000 100c000000000000 ffff88041a8992a0 ffff88041a8987f8
[   47.594230]  ffff88041d203e00 ffffffff81111e55 000000000000038c ffff880414ad4280
[   47.603862] Call Trace:
[   47.608474]  <IRQ>
[   47.610413]  [<ffffffff81111e55>] ? call_timer_fn+0x35/0x120
[   47.620539]  [<ffffffff81100a1f>] handle_irq_event_percpu+0x7f/0x1c0
[   47.629061]  [<ffffffff81100b8c>] handle_irq_event+0x2c/0x50
[   47.636859]  [<ffffffff81103fff>] handle_edge_irq+0x6f/0x130
[   47.644654]  [<ffffffff8102fbf3>] handle_irq+0x73/0x120
[   47.652011]  [<ffffffff810c6ada>] ? atomic_notifier_call_chain+0x1a/0x20
[   47.660854]  [<ffffffff817e374b>] do_IRQ+0x4b/0xd0
[   47.667777]  [<ffffffff817e160c>] common_interrupt+0x8c/0x8c
[   47.675635]  <EOI>

Move the reply_post_host_index array setup into
mpt3sas_base_map_resources(), which is also in the resume path.

Cc: stable@vger.kernel.org
Signed-off-by: Greg Edwards <gedwards@fireweed.org>
Acked-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-12 16:11:57 -04:00
Johannes Thumshirn
0d667f72b2 mpt3sas: Don't spam logs if logging level is 0
In _scsih_io_done() we test if the ioc->logging_level does _not_ have
the MPT_DEBUG_REPLY bit set and if it hasn't we print the debug
messages. This unfortunately is the wrong way around.

Note, the actual bug is older than af0094115 but this commit removed the
CONFIG_SCSI_MPT3SAS_LOGGING Kconfig option which hid the bug.

Fixes: af0094115 'mpt2sas, mpt3sas: Remove SCSI_MPTXSAS_LOGGING entry from Kconfig'
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-08 21:27:13 -04:00
Calvin Owens
8bbb1cf63f mpt3sas: Fix warnings exposed by W=1
Trivial non-functional changes for a couple annoying things:

  1) Functions local to files are not declared static, which is
  frustrating when reading the code because it's non-obvious at first
  glance what's actually called from other files.

  2) Set-but-unused variables abound, presumably to mask -Wunused-result
  errors in the past. None of these are flagged today though (with one
  exception noted below), so remove them.

Fixing (2) exposed the fact that we improperly ignore the return value
of scsi_device_reprobe() in _scsih_reprobe_lun(). Fixing the calling
code to deal with the potential error is non-trivial, so for now just
WARN().

Signed-off-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-08 21:15:32 -04:00
Calvin Owens
98c56ad32c mpt3sas: Eliminate dead sleep_flag code
With the exception of a single call to wait_for_doorbell_int(), all this
conditional sleeping code is dead. So delete it.

Signed-off-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-08 21:13:48 -04:00
Calvin Owens
96902835e7 mpt3sas: Eliminate conditional locking in mpt3sas_scsih_issue_tm()
This flag that conditionally acquires the mutex is confusing and prone
to bugginess: refactor it into two separate function calls, and make the
unlocked one complain if it's called outside the mutex.

Signed-off-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-08 21:10:34 -04:00