Commit Graph

193 Commits

Author SHA1 Message Date
Ming Lei
1a9283782d scsi: core: Simplify LLD module reference counting
Swap two statements in scsi_device_put() now that it is guaranteed that
SCSI hosts outlive SCSI devices. Remove the reference counting code from
scsi_sysfs.c that became superfluous because SCSI hosts now outlive SCSI
devices.

Link: https://lore.kernel.org/r/20220728221851.1822295-4-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[ bvanassche: Extracted this patch from a larger patch ]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-01 19:45:14 -04:00
Martin K. Petersen
e60ac0b9e4 scsi: core: Cache VPD pages b0, b1, b2
The SCSI disk driver consults VPD pages b0 (Block Limits), b1 (Block Device
Characteristics), and b2 (Logical Block Provisioning). Instead of having
sd.c request these pages every revalidate cycle, cache them along with the
other commonly used VPDs.

Link: https://lore.kernel.org/r/20220302053559.32147-6-martin.petersen@oracle.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02 16:59:11 -04:00
Martin K. Petersen
e17d634030 scsi: core: Pick suitable allocation length in scsi_report_opcode()
Some devices hang when a buffer size larger than expected is passed in the
ALLOCATION LENGTH field. For REPORT SUPPORTED OPERATION CODES we currently
only request a single command descriptor at a time and therefore the actual
size of the command is known ahead of time. Limit the ALLOCATION LENGTH to
the header size plus the command length of the opcode we are asking about.

Link: https://lore.kernel.org/r/20220302053559.32147-5-martin.petersen@oracle.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02 16:59:10 -04:00
Martin K. Petersen
c92a6b5d63 scsi: core: Query VPD size before getting full page
We currently default to 255 bytes when fetching VPD pages during discovery.
However, we have had a few devices that are known to wedge if the requested
buffer exceeds a certain size. See commit af73623f5f ("[SCSI] sd: Reduce
buffer size for vpd request") which works around one example of this
problem in the SCSI disk driver.

With commit d188b0675b ("scsi: core: Add sysfs attributes for VPD pages
0h and 89h") we now risk triggering the same issue in the generic midlayer
code.

The problem with the ATA VPD page in particular is that the SCSI portion of
the page is trailed by 512 bytes of verbatim ATA Identify Device
information.  However, not all controllers actually provide the additional
512 bytes and will lock up if one asks for more than the 64 bytes
containing the SCSI protocol fields.

Instead of picking a new, somewhat arbitrary, number of bytes for the VPD
buffer size, start fetching the 4-byte header for each page. The header
contains the size of the page as far as the device is concerned. We can use
the reported size to specify the correct allocation length when
subsequently fetching the full page.

The header validation is done by a new helper function scsi_get_vpd_size()
and both scsi_get_vpd_page() and scsi_get_vpd_buf() now rely on this to
query the page size.

In addition, scsi_get_vpd_page() is simplified to mirror the logic in
scsi_get_vpd_page(). This involves removing the Supported VPD Pages lookup
prior to attempting to query a page. There does not appear any evidence,
even in the oldest SCSI specs, that this step is required. We already rely
on scsi_get_vpd_page() throughout the stack and this function never
consulted the Supported VPD Pages. Since this has not caused any problems
it should be safe to remove the precondition from scsi_get_vpd_page().

Instrumented runs also revealed that the Supported VPD Pages lookup had
little effect since the device page index often was larger than the
supplied buffer size. As a result, inquiries frequently bypassed the index
check and went through the "If we ran off the end of the buffer, give us
the benefit of the doubt" code path which assumed the page was present
despite not being listed. The revised code takes both the page size
reported by the device as well as the size of the buffer provided by the
scsi_get_vpd_page() caller into account.

Link: https://lore.kernel.org/r/20220302053559.32147-3-martin.petersen@oracle.com
Fixes: d188b0675b ("scsi: core: Add sysfs attributes for VPD pages 0h and 89h")
Reported-by: Maciej W. Rozycki <macro@orcam.me.uk>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02 16:59:10 -04:00
Sumit Saxena
f9bdac31cf scsi: core: Increase max device queue_depth to 4096
The maximum SCSI device queue depth of 1024 is not sufficient for RAID
volumes configured behind Broadcom RAID controllers.  For a 16-drive RAID
volume with a device queue depth limit of 1024, only 64 I/Os (1024/16) can
be issued per drive. That is not sufficient to saturate the device.

Link: https://lore.kernel.org/r/20220414103601.140687-1-sumit.saxena@broadcom.com
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-18 23:02:47 -04:00
Bart Van Assche
4bc3bffc1a scsi: core: Fix scsi_device_max_queue_depth()
The comment above scsi_device_max_queue_depth() and also the description of
commit ca44532139 ("scsi: core: Make sure sdev->queue_depth is <=
max(shost->can_queue, 1024)") contradict the implementation of the function
scsi_device_max_queue_depth(). Additionally, the maximum queue depth of a
SCSI LUN never exceeds host->can_queue. Fix scsi_device_max_queue_depth()
by changing max_t() into min_t().

Link: https://lore.kernel.org/r/20211203231950.193369-2-bvanassche@acm.org
Fixes: ca44532139 ("scsi: core: Make sure sdev->queue_depth is <= max(shost->can_queue, 1024)")
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06 22:30:32 -05:00
Bart Van Assche
db33028647 scsi: Remove superfluous #include <linux/async.h> directives
Remove this include directive from code that does not use any functionality
from kernel/async.c.

Link: https://lore.kernel.org/r/20211129194609.3466071-13-bvanassche@acm.org
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-29 23:02:15 -05:00
Linus Torvalds
fe91c4725a SCSI misc on 20211105
This series consists of the usual driver updates (ufs, smartpqi, lpfc,
 target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
 fixes.  Notable core changes are the removal of scsi->tag which caused
 some churn in obsolete drivers and a sweep through all drivers to call
 scsi_done() directly instead of scsi->done() which removes a pointer
 indirection from the hot path and a move to register core sysfs files
 earlier, which means they're available to KOBJ_ADD processing, which
 necessitates switching all drivers to using attribute groups.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYYUfBCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbUJAQDZt4oc
 vUx9JpyrdHxxTCuOzVFd8W1oJn0k5ltCBuz4yAD8DNbGhGm93raMSJ3FOOlzLEbP
 RG8vBdpxMudlvxAPi/A=
 =BSFz
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, smartpqi, lpfc,
  target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
  fixes.

  Notable core changes are the removal of scsi->tag which caused some
  churn in obsolete drivers and a sweep through all drivers to call
  scsi_done() directly instead of scsi->done() which removes a pointer
  indirection from the hot path and a move to register core sysfs files
  earlier, which means they're available to KOBJ_ADD processing, which
  necessitates switching all drivers to using attribute groups"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: lpfc: Update lpfc version to 14.0.0.3
  scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
  scsi: lpfc: Fix link down processing to address NULL pointer dereference
  scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
  scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
  scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
  scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
  scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
  scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
  scsi: ufs: mediatek: Avoid sched_clock() misuse
  scsi: mpt3sas: Make mpt3sas_dev_attrs static
  scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
  scsi: target: core: Stop using bdevname()
  scsi: aha1542: Use memcpy_{from,to}_bvec()
  scsi: sr: Add error handling support for add_disk()
  scsi: sd: Add error handling support for add_disk()
  scsi: target: Perform ALUA group changes in one step
  scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
  scsi: target: Fix alua_tg_pt_gps_count tracking
  scsi: target: Fix ordered tag handling
  ...
2021-11-05 08:42:02 -07:00
Bart Van Assche
a19a93e4c6 scsi: core: pm: Rely on the device driver core for async power management
Instead of implementing asynchronous resume support in the SCSI core, rely
on the device driver core for resuming SCSI devices asynchronously.
Instead of only supporting asynchronous resumes, also support asynchronous
suspends.

Link: https://lore.kernel.org/r/20211006215453.3318929-2-bvanassche@acm.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16 21:08:39 -04:00
Ming Lei
f2b85040ac scsi: core: Put LLD module refcnt after SCSI device is released
SCSI host release is triggered when SCSI device is freed. We have to make
sure that the low-level device driver module won't be unloaded before SCSI
host instance is released because shost->hostt is required in the release
handler.

Make sure to put LLD module refcnt after SCSI device is released.

Fixes a kernel panic of 'BUG: unable to handle page fault for address'
reported by Changhui and Yi.

Link: https://lore.kernel.org/r/20211008050118.1440686-1-ming.lei@redhat.com
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Changhui Zhong <czhong@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12 22:08:23 -04:00
Bart Van Assche
aa8e25e500 scsi: core: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. Cast away constness where necessary when passing a SCSI command
pointer to scsi_cmd_to_rq(). This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-3-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11 22:25:37 -04:00
Hannes Reinecke
464a00c9e0 scsi: core: Kill DRIVER_SENSE
Replace the check for DRIVER_SENSE with a check for
scsi_status_is_check_condition().

Audit all callsites to ensure the SAM status is set correctly. For
backwards compability move the DRIVER_SENSE definition to sg.h, and update
sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever
SAM_STAT_CHECK_CONDITION is present.

[mkp: fix zeroday srp warning]

Link: https://lore.kernel.org/r/20210427083046.31620-10-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fix
2021-05-31 22:48:21 -04:00
Hannes Reinecke
d0672a03e0 scsi: core: Introduce scsi_status_is_check_condition()
Add a helper function scsi_status_is_check_condition() to encapsulate the
frequent checks for SAM_STAT_CHECK_CONDITION.

Link: https://lore.kernel.org/r/20210427083046.31620-9-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:21 -04:00
Hannes Reinecke
ced202f7bd scsi: core: Stop using DRIVER_ERROR
Return the actual error code in __scsi_execute() (which, according to the
documentation, should have happened anyway).  And audit all callers to cope
with negative return values from __scsi_execute() and friends.

[mkp: resolve conflict and return bool]

Link: https://lore.kernel.org/r/20210427083046.31620-7-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:21 -04:00
Ming Lei
020b0f0a31 scsi: core: Replace sdev->device_busy with sbitmap
SCSI currently uses an atomic variable to track queue depth for each
attached device. The queue depth depends on many factors such as transport
type and device implementation. In addition, the SCSI device queue depth is
not a static entity but changes over time as a result of congestion
management.

While blk-mq currently tracks queue depth for each hctx, it can't easily be
changed to accommodate the SCSI per-device requirement.

The current approach of using an atomic variable doesn't scale well when
there are lots of CPU cores and the disk is very fast. IOPS can be
substantially impacted by the atomic in the hot path.

Replace the atomic variable sdev->device_busy with an sbitmap for tracking
the SCSI device queue depth.

It has been observed that IOPS is improved ~30% by this patchset in the
following test:

1) test machine(32 logical CPU cores)
	Thread(s) per core:  2
	Core(s) per socket:  8
	Socket(s):           2
	NUMA node(s):        2
	Model name:          Intel(R) Xeon(R) Silver 4110 CPU @ 2.10GHz

2) setup scsi_debug:
modprobe scsi_debug virtual_gb=128 max_luns=1 submit_queues=32 delay=0 max_queue=256

3) fio script:
fio --rw=randread --size=128G --direct=1 --ioengine=libaio --iodepth=2048 \
	--numjobs=32 --bs=4k --group_reporting=1 --group_reporting=1 --runtime=60 \
	--loops=10000 --name=job1 --filename=/dev/sdN

[mkp: fix device_busy reference in mpt3sas]

Link: https://lore.kernel.org/r/20210122023317.687987-14-ming.lei@redhat.com
Link: https://lore.kernel.org/linux-block/20200119071432.18558-6-ming.lei@redhat.com/
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04 17:37:00 -05:00
Ming Lei
ca44532139 scsi: core: Make sure sdev->queue_depth is <= max(shost->can_queue, 1024)
Limit SCSI device's queue depth to max(host->can_queue, 1024) in
scsi_change_queue_depth(). 1024 is big enough for saturating current fast
SCSI LUN(SSD or RAID volume on multiple SSDs). Also single hardware queue
depth is usually enough for saturating single LUN because per-core
performance is often considered in storage design.

This patch is needed for replacing sdev->device_busy with sbitmap which has
to be pre-allocated with reasonable max depth.

Link: https://lore.kernel.org/r/20210122023317.687987-13-ming.lei@redhat.com
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04 17:37:00 -05:00
Bean Huo
71df6fb976 scsi: core: Remove scsi_sdb_cache
After commit f664a3cc17 ("scsi: kill off the legacy IO path"),
scsi_sdb_cache is not used anymore. Remove it.

Link: https://lore.kernel.org/r/20200619154117.10262-2-huobean@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-19 23:06:43 -04:00
Hannes Reinecke
c5a9707672 scsi: core: Remove cmd_list functionality
Remove cmd_list functionality; no users left.  With that the
scsi_put_command() becomes empty, so remove that one, too.

Link: https://lore.kernel.org/r/20200228075318.91255-14-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28 20:54:55 -05:00
John Garry
5693340143 scsi: core: Delete scsi_use_blk_mq
Module param scsi_use_blk_mq has not been referenced for some time, so zap
it.

Link: https://lore.kernel.org/r/1581355992-139274-1-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-12 23:00:42 -05:00
Linus Torvalds
ef2cc88e2a SCSI misc on 20191130
This is mostly update of the usual drivers: aacraid, ufs, zfcp,
 NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx
 plus a whole load of minor updates and fixes.  The two major core
 changes are Al Viro's reworking of sg's handling of copy to/from user,
 Ming Lei's removal of the host busy counter to avoid contention in the
 multiqueue case and Damien Le Moal's fixing of residual tracking
 across error handling.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXeKvHCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQJMAQDAjlAi
 SNfbyndMqyf+rZGWufDI+43Up1VvW9GeWJHeDwEAxfO5XZsCks2uT8UxXhpEp9L7
 HkiUww3zbcgl0FWFkUM=
 =cdVU
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: aacraid, ufs, zfcp,
  NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx
  plus a whole load of minor updates and fixes.

  The major core changes are Al Viro's reworking of sg's handling of
  copy to/from user, Ming Lei's removal of the host busy counter to
  avoid contention in the multiqueue case and Damien Le Moal's fixing of
  residual tracking across error handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (251 commits)
  scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort()
  scsi: target: core: Fix a pr_debug() argument
  scsi: iscsi: Don't send data to unbound connection
  scsi: target: iscsi: Wait for all commands to finish before freeing a session
  scsi: target: core: Release SPC-2 reservations when closing a session
  scsi: target: core: Document target_cmd_size_check()
  scsi: bnx2i: fix potential use after free
  Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails"
  scsi: NCR5380: Add disconnect_mask module parameter
  scsi: NCR5380: Unconditionally clear ICR after do_abort()
  scsi: NCR5380: Call scsi_set_resid() on command completion
  scsi: scsi_debug: num_tgts must be >= 0
  scsi: lpfc: use hdwq assigned cpu for allocation
  scsi: arcmsr: fix indentation issues
  scsi: qla4xxx: fix double free bug
  scsi: pm80xx: Modified the logic to collect fatal dump
  scsi: pm80xx: Tie the interrupt name to the module instance
  scsi: pm80xx: Controller fatal error through sysfs
  scsi: pm80xx: Do not request 12G sas speeds
  scsi: pm80xx: Cleanup command when a reset times out
  ...
2019-12-02 13:37:02 -08:00
Ming Lei
6eb045e092 scsi: core: avoid host-wide host_busy counter for scsi_mq
It isn't necessary to check the host depth in scsi_queue_rq() any more
since it has been respected by blk-mq before calling scsi_queue_rq() via
getting driver tag.

Lots of LUNs may attach to same host and per-host IOPS may reach millions,
so we should avoid expensive atomic operations on the host-wide counter in
the IO path.

This patch implements scsi_host_busy() via blk_mq_tagset_busy_iter() with
one scsi command state for reading the count of busy IOs for scsi_mq.

It is observed that IOPS is increased by 15% in IO test on scsi_debug (32
LUNs, 32 submit queues, 1024 can_queue, libaio/dio) in a dual-socket
system.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20191025065855.6309-1-ming.lei@redhat.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-11-01 20:12:50 -04:00
Paul E. McKenney
c0eaf15cd5 drivers/scsi: Replace rcu_swap_protected() with rcu_replace_pointer()
This commit replaces the use of rcu_swap_protected() with the more
intuitively appealing rcu_replace_pointer() as a step towards removing
rcu_swap_protected().

Link: https://lore.kernel.org/lkml/CAHk-=wiAsJLw1egFEE=Z7-GGtM6wcvtyytXZA1+BHqta4gg6Hw@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
[ paulmck: From rcu_replace() to rcu_replace_pointer() per Ingo Molnar. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: <linux-scsi@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
2019-10-30 08:44:17 -07:00
Ryan Attard
d188b0675b scsi: core: Add sysfs attributes for VPD pages 0h and 89h
Add sysfs attributes for the ATA information page and Supported VPD Pages
page.

Link: https://lore.kernel.org/r/20190926162216.56591-1-ryanattard@ryanattard.info
Signed-off-by: Ryan Attard <ryanattard@ryanattard.info>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30 23:24:36 -04:00
Linus Torvalds
ba6d10ab80 SCSI misc on 20190709
This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
 mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
 removal of the osst driver (I heard from Willem privately that he
 would like the driver removed because all his test hardware has
 failed).  Plus number of minor changes, spelling fixes and other
 trivia.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXSTl4yYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdcxAQDCJVbd
 fPUX76/V1ldupunF97+3DTharxxbst+VnkOnCwD8D4c0KFFFOI9+F36cnMGCPegE
 fjy17dQLvsJ4GsidHy8=
 =aS5B
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
  mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
  removal of the osst driver (I heard from Willem privately that he
  would like the driver removed because all his test hardware has
  failed). Plus number of minor changes, spelling fixes and other
  trivia.

  The big merge conflict this time around is the SPDX licence tags.
  Following discussion on linux-next, we believe our version to be more
  accurate than the one in the tree, so the resolution is to take our
  version for all the SPDX conflicts"

Note on the SPDX license tag conversion conflicts: the SCSI tree had
done its own SPDX conversion, which in some cases conflicted with the
treewide ones done by Thomas & co.

In almost all cases, the conflicts were purely syntactic: the SCSI tree
used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the
treewide conversion had used the new-style ones ("GPL-2.0-only" and
"GPL-2.0-or-later").

In these cases I picked the new-style one.

In a few cases, the SPDX conversion was actually different, though.  As
explained by James above, and in more detail in a pre-pull-request
thread:

 "The other problem is actually substantive: In the libsas code Luben
  Tuikov originally specified gpl 2.0 only by dint of stating:

  * This file is licensed under GPLv2.

  In all the libsas files, but then muddied the water by quoting GPLv2
  verbatim (which includes the or later than language). So for these
  files Christoph did the conversion to v2 only SPDX tags and Thomas
  converted to v2 or later tags"

So in those cases, where the spdx tag substantially mattered, I took the
SCSI tree conversion of it, but then also took the opportunity to turn
the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag.

Similarly, when there were whitespace differences or other differences
to the comments around the copyright notices, I took the version from
the SCSI tree as being the more specific conversion.

Finally, in the spdx conversions that had no conflicts (because the
treewide ones hadn't been done for those files), I just took the SCSI
tree version as-is, even if it was old-style.  The old-style conversions
are perfectly valid, even if the "-only" and "-or-later" versions are
perhaps more descriptive.

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits)
  scsi: qla2xxx: move IO flush to the front of NVME rport unregistration
  scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  scsi: qla2xxx: on session delete, return nvme cmd
  scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
  scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1
  scsi: megaraid_sas: Introduce various Aero performance modes
  scsi: megaraid_sas: Use high IOPS queues based on IO workload
  scsi: megaraid_sas: Set affinity for high IOPS reply queues
  scsi: megaraid_sas: Enable coalescing for high IOPS queues
  scsi: megaraid_sas: Add support for High IOPS queues
  scsi: megaraid_sas: Add support for MPI toolbox commands
  scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver
  scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
  scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
  scsi: megaraid_sas: Handle sequence JBOD map failure at driver level
  scsi: megaraid_sas: Don't send FPIO to RL Bypass queue
  scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
  scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
  scsi: megaraid_sas: Call disable_irq from process IRQ poll
  scsi: megaraid_sas: Remove few debug counters from IO path
  ...
2019-07-11 15:14:01 -07:00
Bart Van Assche
f049cf1a7b scsi: sd: Rely on the driver core for asynchronous probing
As explained during the 2018 LSF/MM session about increasing SCSI disk
probing concurrency, the problems with the current probing approach are as
follows:

 - The driver core is unaware of asynchronous SCSI LUN probing.
   wait_for_device_probe() waits for all asynchronous probes except
   asynchronous SCSI disk probes.

 - There is unnecessary serialization between sd_probe() and sd_remove().
   This can lead to a deadlock.

Hence this patch that modifies the sd driver such that it uses the driver
core framework for asynchronous probing. The async domain and
get_device()/put_device() pairs that became superfluous due to this change
are removed.

This patch does not affect the time needed for loading the scsi_debug
kernel module with parameters delay=0 and max_luns=256.

This patch depends on commit ef0ff68351 ("driver core: Probe devices
asynchronously instead of the driver") that went upstream in kernel version
v5.1-rc1.

Cc: Lee Duncan <lduncan@suse.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18 19:46:17 -04:00
Christoph Hellwig
026104bfa5 scsi: core: add SPDX tags to scsi midlayer files missing licensing information
Add the default kernel GPLv2 annotation to SCSI midlayer files missing any
licensing information.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-21 06:16:21 -04:00
Thomas Gleixner
09c434b8a0 treewide: Add SPDX license identifier for more missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Hannes Reinecke
b9cef50921 scsi: kill command serial number
No users left, kill it.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-27 09:19:24 -05:00
Jens Axboe
f664a3cc17 scsi: kill off the legacy IO path
This removes the legacy (non-mq) IO path for SCSI.

Cc: linux-scsi@vger.kernel.org
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:42:32 -07:00
Ming Lei
c84b023a4c scsi: read host_busy via scsi_host_busy()
No functional change.

Just introduce scsi_host_busy() and replace the direct read of
scsi_host->host_busy with this new API.

Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Don Brace <don.brace@microsemi.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26 12:53:26 -04:00
Johannes Thumshirn
c65be1a63f scsi: core: check for equality of result byte values
When evaluating a SCSI command's result using the field access macros,
check for equality of the fields and not if a specific bit is set.

This is a preparation patch, for reworking the results field in the
SCSI command.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26 12:27:06 -04:00
Jianchao Wang
8ef7fe4b2b scsi: core: fix two wrong indentation cases
No functional changes. Just fix two wrong indentation cases in
scsi_finish_command and scsi_decide_disposition.

Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-27 22:26:12 -05:00
James Bottomley
2441500a41 Merge branch 'fixes' into misc 2017-09-07 12:12:43 -07:00
Bart Van Assche
ccf1e0045e scsi: Rework handling of scsi_device.vpd_pg8[03]
Introduce struct scsi_vpd for the VPD page length, data and the RCU head
that will be used to free the VPD data. Use kfree_rcu() instead of
kfree() to free VPD data. Move the VPD buffer pointer check inside the
RCU read lock in the sysfs code. Only annotate pointers that are shared
across threads with __rcu. Use rcu_dereference() when dereferencing an
RCU pointer. This patch suppresses about twenty sparse complaints about
the vpd_pg8[03] pointers. This patch also fixes a race condition, namely
that updating of the VPD pointers and length variables in struct
scsi_device was not atomic with reference to the code reading these
variables. See also "Does the update code tolerate concurrent accesses?"
in Documentation/RCU/checklist.txt.

Fixes: commit 09e2b0b146 ("scsi: rescan VPD attributes")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Shane Seymour <shane.seymour@hpe.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-29 21:51:42 -04:00
Bart Van Assche
1e3f720a67 scsi: Rework the code for caching Vital Product Data (VPD)
Introduce the scsi_get_vpd_buf() and scsi_update_vpd_page()
functions. The only functional change in this patch is that if updating
page 0x80 fails that it is attempted to update page 0x83.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Shane M Seymour <shane.seymour@hpe.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-29 21:51:42 -04:00
Christoph Hellwig
cbe7dfa26e Revert "scsi: default to scsi-mq"
Defaulting to scsi-mq in 4.13-rc has shown various regressions
on setups that we didn't previously consider.  Fixes for them are
in progress, but too invasive to make it in this cycle.  So for
now revert the commit that defaults to blk-mq for SCSI.  For 4.14
we'll plan to try again with these fixes.

This reverts commit 5c279bd9e4.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-16 20:01:32 -04:00
Christoph Hellwig
5c279bd9e4 scsi: default to scsi-mq
Remove the SCSI_MQ_DEFAULT config option and default to the blk-mq I/O
path now that we had plenty of testing, and have I/O schedulers for
blk-mq.  The module option to disable the blk-mq path is kept around for
now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-27 21:31:12 -04:00
Bart Van Assche
2dd6fb5957 scsi: Only add commands to the device command list if required by the LLD
Just like for the scsi-mq code path, in the single queue SCSI code path
only add commands to the per-device command list if required by the SCSI
LLD. This patch will make it easier to merge the single-queue and
multiqueue command initialization code.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12 20:55:59 -04:00
Zhou Zhengping
4ff7adc8c7 scsi: Skip deleted devices in __scsi_device_lookup
When a device is unplugged from a SCSI controller, if the scsi_device is
still in use by application layer, it won't get released until users
close it.

In this case, scsi_device_remove just set the scsi_device's state to be
SDEV_DEL. But if you plug the disk just before the old scsi_device is
released, then there will be two scsi_device structures in
scsi_host->__devices. When the next unplug event happens, some low-level
drivers will check whether the scsi_device has been added to host (for
example the MegaRAID SAS series controller) by calling
scsi_device_lookup(call __scsi_device_lookup) in function
megasas_aen_polling. __scsi_device_lookup will return the first
scsi_device. Because its state is SDEV_DEL, the scsi_device_lookup will
return NULL, making the low-level driver assume that the scsi_device has
been removed, and won't call scsi_device_remove which will lead to hot
swap failure.

Signed-off-by: Zhou Zhengping <johnzzpcrystal@gmail.com>
Tested-by: Zeng Rujia <ZengRujia@sangfor.com.cn>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195607
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-08 21:36:06 -04:00
Christoph Hellwig
57292b58dd block: introduce blk_rq_is_passthrough
This can be used to check for fs vs non-fs requests and basically
removes all knowledge of BLOCK_PC specific from the block layer,
as well as preparing for removing the cmd_type field in struct request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31 14:00:34 -07:00
Christoph Hellwig
e9c787e65c scsi: allocate scsi_cmnd structures as part of struct request
Rely on the new block layer functionality to allocate additional driver
specific data behind struct request instead of implementing it in SCSI
itѕelf.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27 15:08:35 -07:00
Christoph Hellwig
eeff68c561 scsi: remove scsi_cmd_dma_pool
There is no need for GFP_DMA allocations of the scsi_cmnd structures
themselves, all that might be DMAed to or from is the actual payload,
or the sense buffers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27 15:08:35 -07:00
Christoph Hellwig
0a6ac4ee7c scsi: respect unchecked_isa_dma for blk-mq
Currently blk-mq always allocates the sense buffer using normal GFP_KERNEL
allocation.  Refactor the cmd pool code to split the cmd and sense allocation
and share the code to allocate the sense buffers as well as the sense buffer
slab caches between the legacy and blk-mq path.

Note that this switches to lazy allocation of the sense slab caches - the
slab caches (not the actual allocations) won't be destroy until the scsi
module is unloaded instead of keeping track of hosts using them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27 15:08:35 -07:00
Christoph Hellwig
0fbc3e0ff6 scsi: remove gfp_flags member in scsi_host_cmd_pool
When using the slab allocator we already decide at cache creation time if
an allocation comes from a GFP_DMA pool using the SLAB_CACHE_DMA flag,
and there is no point passing the kmalloc-family only GFP_DMA flag to
kmem_cache_alloc.  Drop all the infrastructure for doing so.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27 15:08:35 -07:00
Jens Axboe
d278d4a889 block: add code to track actual device queue depth
For blk-mq, ->nr_requests does track queue depth, at least at init
time. But for the older queue paths, it's simply a soft setting.
On top of that, it's generally larger than the hardware setting
on purpose, to allow backup of requests for merging.

Fill a hole in struct request with a 'queue_depth' member, that
drivers can call to more closely inform the block layer of the
real queue depth.

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2016-11-05 17:09:53 -06:00
Bart Van Assche
8d58881b99 scsi: Avoid that toggling use_blk_mq triggers a memory leak
This patch avoids that the following memory leak is triggered if
use_blk_mq is disabled after a SCSI host has been allocated by the
ib_srp driver and before the same SCSI host is freed:

unreferenced object 0xffff8803a168c568 (size 256):
  backtrace:
    [<ffffffff81620c95>] kmemleak_alloc+0x45/0xa0
    [<ffffffff811bb104>] __kmalloc_node+0x1e4/0x400
    [<ffffffff81309fe4>] blk_mq_alloc_tag_set+0xb4/0x230
    [<ffffffff814731b7>] scsi_mq_setup_tags+0xc7/0xd0
    [<ffffffff81469c26>] scsi_add_host_with_dma+0x216/0x2d0
    [<ffffffffa064bef5>] srp_create_target+0xe55/0x13d0 [ib_srp]
    [<ffffffff8143ce23>] dev_attr_store+0x13/0x20
    [<ffffffff8125f030>] sysfs_kf_write+0x40/0x50
    [<ffffffff8125e397>] kernfs_fop_write+0x137/0x1c0
    [<ffffffff811d8c13>] __vfs_write+0x23/0x140
    [<ffffffff811d92e0>] vfs_write+0xb0/0x190
    [<ffffffff811da5b4>] SyS_write+0x44/0xa0
    [<ffffffff8162c8a5>] entry_SYSCALL_64_fastpath+0x18/0xa8

Fixes: 9aa9cc4221 ("scsi: remove the disable_blk_mq host flag")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26 20:58:42 -04:00
Christoph Hellwig
9aa9cc4221 scsi: remove the disable_blk_mq host flag
We've had scsi-mq for 2.5 years now, so we can remove the unused flag to
disable the code on a per-host basis that was put in for unexpected
emergencies during bringup.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15 15:11:20 -04:00
Hannes Reinecke
5ddfe0858e scsi: Do not attach VPD to devices that don't support it
The patch "scsi: rescan VPD attributes" introduced a regression in which
devices that don't support VPD were being scanned for VPD attributes
anyway.  This could cause issues for some devices and should be avoided
so the check for scsi_level has been moved out of scsi_add_lun and into
scsi_attach_vpd so that all callers will not scan VPD for devices that
don't support it.

[mkp: Merge fix]

Fixes: 09e2b0b146 ("scsi: rescan VPD attributes")
Cc: <stable@vger.kernel.org> #v4.5+
Suggested-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-05 06:56:40 -04:00
Hannes Reinecke
09e2b0b146 scsi: rescan VPD attributes
The VPD page information might change, so we need to be able to update
it. This patch implements a VPD page rescan whenever the 'rescan' sysfs
attribute is triggered.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-30 11:23:45 -05:00
Christoph Hellwig
64d513ac31 scsi: use host wide tags by default
This patch changes the !blk-mq path to the same defaults as the blk-mq
I/O path by always enabling block tagging, and always using host wide
tags.  We've had blk-mq available for a few releases so bugs with
this mode should have been ironed out, and this ensures we get better
coverage of over tagging setup over different configs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09 17:11:57 -08:00