The inno_hdmi driver relies on its own internal infoframe type matching
the hardware.
This works fine, but in order to make further reworks easier, let's
switch to the HDMI spec definition of those types.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-16-knaerzche@gmail.com
The code to upload infoframes to the controller uses a weird construct
which, based on the previous function call return code, will either
disable or enable that infoframe.
In order to get rid of that argument, let's split the function to
disable the infoframe into a separate function and make it obvious what
we are doing in the error path.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-15-knaerzche@gmail.com
The HDMI vendor infoframe is only meant to be sent with 4k60 modes and
higher, but the controller doesn't support them. Let's drop them from
the kernel.
Suggested-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-14-knaerzche@gmail.com
The tmds_rate field in the inno_hdmi structure is used mostly to
configure the internal i2c controller divider through a call to the
inno_hdmi_i2c_init() function.
We can simply make that rate an argument to that function, which also
removes a workaround to initialize the divider at probe time when we
don't have a mode yet.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-13-knaerzche@gmail.com
The driver has a lot of logic to deal with multiple input formats, but
hardcodes it to RGB. This means that most of that code has been dead
code, so let's get rid of it.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
[made checkpatch happy]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-11-knaerzche@gmail.com
The sink_has_audio flag is not used anywhere in the driver so let's get
rid of it. It's redundant with drm_display_info.has_audio anyway.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-10-knaerzche@gmail.com
The mode's VIC is only ever used in the inno_hdmi_setup() function so
there's no need to store it in the main structure.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
[made checkpatch happy]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-9-knaerzche@gmail.com
We're not doing anything special in atomic_mode_set so we can simply
merge it into atomic_enable.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-8-knaerzche@gmail.com
The inno_hdmi encoder still uses the !atomic variants of enable, disable
and modeset. Convert to their atomic equivalents.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-7-knaerzche@gmail.com
The driver maintains a copy of the adjusted mode but doesn't use it
anywhere. Remove it.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-6-knaerzche@gmail.com
The mode_fixup implementation doesn't do anything, so we can simply
remove it.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-5-knaerzche@gmail.com
In contrast to RK3036, RK312x SoCs have multiple output channels such as
RGB (i.e. LVDS TTL), LVDS, DSI and HDMI.
In order to support that, this splits output from RK3036 and defines an
separate one for RK3126 with the registers required to enable the
appropriate output and setup the correct polarity.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222174220.55249-3-knaerzche@gmail.com
tilcdc currently just ioremaps its iomem, without doing the (a bit more
robust) request on the memory first. The devm_ functions provide a handy
way to both request and ioremap the memory with automatic cleanup.
Replace the manual ioremap with the devm_ version.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222115216.19218-2-pstanner@redhat.com
In probe() we create the drm_device, and then register the MHI controller.
In remove(), we should unregister the controller first, then remove the
drm_device. Update the remove() operations to match.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-8-quic_jhugo@quicinc.com
Offload the balancing of init and destroy calls to DRM managed APIs.
mutex destroy for ->cntl_mutex is not called during device release and
destroy workqueue is not called in error path of create_qdev(). So, use
DRM managed APIs to manage the release of resources and avoid such
problems.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-7-quic_jhugo@quicinc.com
These panels are used by Mediatek MT8173 Chromebooks, and they used to
work with the downstream v4.19 kernel without any specified delay.
Back in the v4.19 kernel, they used the "little white lie" approach,
which is making the devicetree claim a specific panel's compatible
string for many different panels. That was a common solution before the
generic edp-panel driver.
After we uprevved the device to a newer kernel and used the edp-panel
driver, we saw multiple devices reporting warnings of using an unknown
panel and falling back to the conservative timings, which means that
they turn on/off much more slowly than they should. We tried to fill in
the timings for those panels, but we failed to find all the data sheets
for them.
Therefore, instead of having them use the default conservative timings,
update them with less-conservative timings from other panels of the same
vendor. The panels should still work under those timings, and we can
save some delays and suppress the warnings.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214152817.2766280-4-treapking@chromium.org
Add the support of powered_on_to_enable delay as the minimum time that
needs to have passed between the panel powered on and enable may begin.
This delay is seen in BOE panels as the minimum delay of T3+T4+T5+T6+T8
in the eDP timing diagrams.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214152817.2766280-2-treapking@chromium.org
The original rationale for
commit cd456f8d06 ("drm: Restrict stackdepot usage to builtin drm.ko")
was that depot_save_stack() (which is what we used back then)
wasn't exported. stack_depot_save() (which is what we use now) is
exported however, so relax the dependency allow CONFIG_DRM_MM_DEBUG
with DRM=m.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215111129.9559-1-ville.syrjala@linux.intel.com
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
The name of the structure drm_atomic_state is confusing. Let's add an
entry to our todo list to rename it.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20231214100917.277842-5-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The current documentation of drm_atomic_state says that it's the "global
state object". This is confusing since, while it does contain all the
objects affected by an update and their respective states, if an object
isn't affected by this update it won't be part of it.
Thus, it's not truly a "global state", unlike object state structures
that do contain the entire state of a given object.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://lore.kernel.org/r/20231214100917.277842-4-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Commits 63e83c1dba ("drm: Consolidate connector arrays in
drm_atomic_state"), b8b5342b69 ("drm: Consolidate plane arrays in
drm_atomic_state") and 5d943aa6c0 ("drm: Consolidate crtc arrays in
drm_atomic_state") moved the object pointer and their state pointer to
an intermediate structure storing both.
The CRTC commit didn't update the doc of the crtcs field to reflect
that, and the doc for the planes and connectors fields mention that they
are pointers to an array of structures with per-$OBJECT data.
The private_objs field was added later on by commit b430c27a7d ("drm:
Add driver-private objects to atomic state") reusing the same sentence
than the crtcs field, probably due to copy and paste.
While these fields are indeed pointers to an array, each item of that
array contain a pointer to the object structure affected by the update,
and its old and new state. There's no per-object data there, and there's
more than just a pointer to the objects.
Let's rephrase those fields a bit to better match the current situation.
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20231214100917.277842-3-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Commit 63e83c1dba ("drm: Consolidate connector arrays in
drm_atomic_state") removed the connector_states field but didn't remove
its mention in the num_connectors documentation.
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20231214100917.277842-2-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Some fields of drm_atomic_state have been documented in-line, but some
were documented in the main kerneldoc block before the structure.
Since the former is the preferred option in DRM, let's move all the
fields to an inline documentation.
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20231214100917.277842-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Use the screen_info instance from the device instead of dereferencing
the global screen_info state. Decouples the driver from per-architecture
code. Duplicated the screen_info data, so that vesafb can modify it at
will.
v2:
* comment on devm_kmemdup() usage (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-5-tzimmermann@suse.de
Use the screen_info instance from the device instead of dereferencing
the global screen_info state. Decouples the driver from per-architecture
code. Duplicated the screen_info data, so that efifb can modify it at
will.
v2:
* comment on devm_kmemdup() usage (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-3-tzimmermann@suse.de
Get the global screen_info's address once and access the data via
this pointer. Limits the use of global state.
v3:
* use const screen_info in several places (Sui)
* fix build for deferred takeover (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-2-tzimmermann@suse.de
Every time QAIC_MMAP_BO ioctl is called for a BO,
drm_gem_create_mmap_offset() is called. Calling
drm_gem_create_mmap_offset() more then once for a BO seems redundant.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-6-quic_jhugo@quicinc.com
Do not free BO explicitly in error path, just drop its reference, cleanup
will be taken care by DRM as we have registered for ->free() callback.
This patch makes sure that there is only one code path for BO to be freed.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-5-quic_jhugo@quicinc.com
The timesync channels have their struct fields out of order with the rest
of the channels. Fix them so there is a consistent style in the file.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-4-quic_jhugo@quicinc.com
->queued field is used to track whether the BO is submitted to hardware for
DMA or not. Since same information can be retrieved using ->xfer_list field
of same structure remove ->queued as it is redundant.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-3-quic_jhugo@quicinc.com
->size in struct qaic_attach_slice_hdr is redundant since we have BO handle
and its size can be retrieved from base BO structure.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163457.1295993-2-quic_jhugo@quicinc.com
This Venus capset definition is used by Qemu, and Qemu imports the
kernel protocol header file. Add Venus capset to the VirtIO-GPU protocol.
Signed-off-by: Huang Rui <ray.huang@amd.com>
[dmitry.osipenko@collabora.com: edit commit message]
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230915105918.3763061-1-ray.huang@amd.com
