mirror of
https://github.com/torvalds/linux.git
synced 2024-11-10 22:21:40 +00:00
62b57e3ddd
9572 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
362067b6d5 |
regulator: Updates for v6.5
This release is almost all drivers, there's some small improvements in
the core but otherwise everything is updates to drivers, mostly the
addition of new ones.
There's also a bunch of changes pulled in from the MFD subsystem as
dependencies, Rockchip and TI core MFD code that the regulator drivers
depend on.
I've also yet again managed to put a SPI commit in the regulator tree, I
don't know what it is about those two trees (this for spi-geni-qcom).
- Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZkRUACgkQJNaLcl1U
h9A0bAf+IM6F/vTF7R/2NTlR3M/Z7HGinxK1oit6LuZfKnveaRRCEWvBVoZzZpjs
CzdWTPBWA2jyETzEqmX7gxYnxf2aaLieLEpKRZSh3uQd5OKmrizQDs5/OdaVUViK
/ytmqd/IFgFfwaI+az38CQlTf+dDyuJDB0OwlkEkoaxWjeiAh6INBh6xO9aKczoW
lFd0tOVQt1EcBKdB4tBJLTFIWWsG66xy9NZ018FrcA+bCmQVBvkbqcahayI5Q6Kw
m5H7cZuFbKV51AlyYMF/C4Lwhy1mOT166eRmSrgxBXCsqhpFeHYkJQkmumNd3gkQ
oSQPTZHqSblJA7Utw09mlT6r/xqL0Q==
=/f85
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This release is almost all drivers, there's some small improvements in
the core but otherwise everything is updates to drivers, mostly the
addition of new ones.
There's also a bunch of changes pulled in from the MFD subsystem as
dependencies, Rockchip and TI core MFD code that the regulator drivers
depend on.
I've also yet again managed to put a SPI commit in the regulator tree,
I don't know what it is about those two trees (this for
spi-geni-qcom).
Summary:
- Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a"
* tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (43 commits)
regulator: Add Renesas PMIC RAA215300 driver
regulator: dt-bindings: Add Renesas RAA215300 PMIC bindings
regulator: ltc3676: Use maple tree register cache
regulator: ltc3589: Use maple tree register cache
regulator: helper: Document ramp_delay parameter of regulator_set_ramp_delay_regmap()
regulator: mt6358: Use linear voltage helpers for single range regulators
regulator: mt6358: Const-ify mt6358_regulator_info data structures
regulator: mt6358: Drop *_SSHUB regulators
regulator: mt6358: Merge VCN33_* regulators
regulator: dt-bindings: mt6358: Drop *_sshub regulators
regulator: dt-bindings: mt6358: Merge ldo_vcn33_* regulators
regulator: dt-bindings: pwm-regulator: Add missing type for "pwm-dutycycle-unit"
regulator: Switch two more i2c drivers back to use .probe()
spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
regulator: tps6594-regulator: Add driver for TI TPS6594 regulators
regulator: axp20x: Add AXP15060 support
regulator: axp20x: Add support for AXP313a variant
dt-bindings: pfuze100.yaml: Add an entry for interrupts
regulator: stm32-pwr: Fix regulator disabling
...
|
||
|
Linus Torvalds
|
cd336f6562 |
Time, timekeeping and related device driver updates:
- Core:
- A set of fixes, cleanups and enhancements to the posix timer code:
- Prevent another possible live lock scenario in the exit() path,
which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.
- Fix a loop termination issue which was reported syzcaller/KSAN in
the posix timer ID allocation code.
That triggered a deeper look into the posix-timer code which
unearthed more small issues.
- Add missing READ/WRITE_ONCE() annotations
- Fix or remove completely outdated comments
- Document places which are subtle and completely undocumented.
- Add missing hrtimer modes to the trace event decoder
- Small cleanups and enhancements all over the place
- Drivers:
- Rework the Hyper-V clocksource and sched clock setup code
- Remove a deprecated clocksource driver
- Small fixes and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=hRV9
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Time, timekeeping and related device driver updates:
Core:
- A set of fixes, cleanups and enhancements to the posix timer code:
- Prevent another possible live lock scenario in the exit() path,
which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.
- Fix a loop termination issue which was reported syzcaller/KSAN
in the posix timer ID allocation code.
That triggered a deeper look into the posix-timer code which
unearthed more small issues.
- Add missing READ/WRITE_ONCE() annotations
- Fix or remove completely outdated comments
- Document places which are subtle and completely undocumented.
- Add missing hrtimer modes to the trace event decoder
- Small cleanups and enhancements all over the place
Drivers:
- Rework the Hyper-V clocksource and sched clock setup code
- Remove a deprecated clocksource driver
- Small fixes and enhancements all over the place"
* tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
dt-bindings: timers: Add Ralink SoCs timer
clocksource/drivers/hyper-v: Rework clocksource and sched clock setup
dt-bindings: timer: brcm,kona-timer: convert to YAML
clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only user
clk: imx: Drop inclusion of unused header <soc/imx/timer.h>
hrtimer: Add missing sparse annotations to hrtimer locking
clocksource/drivers/imx-gpt: Use only a single name for functions
clocksource/drivers/loongson1: Move PWM timer to clocksource framework
dt-bindings: timer: Add Loongson-1 clocksource
MIPS: Loongson32: Remove deprecated PWM timer clocksource
clocksource/drivers/ingenic-timer: Use pm_sleep_ptr() macro
tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
posix-timers: Add sys_ni_posix_timers() prototype
tick/rcu: Fix bogus ratelimit condition
alarmtimer: Remove unnecessary (void *) cast
alarmtimer: Remove unnecessary initialization of variable 'ret'
posix-timers: Refer properly to CONFIG_HIGH_RES_TIMERS
posix-timers: Polish coding style in a few places
posix-timers: Remove pointless comments
...
|
||
Mark Brown
|
54e47eade7
|
Add Renesas PMIC RAA215300 and built-in RTC
Merge series from Biju Das <biju.das.jz@bp.renesas.com>: This patch series aims to add support for Renesas PMIC RAA215300 and built-in RTC found on this PMIC device. The details of PMIC can be found here[1]. Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main device and another for rtc device. |
||
Uwe Kleine-König
|
011da162da |
clk: imx: Drop inclusion of unused header <soc/imx/timer.h>
The clk drivers use none of the symbols defined in <soc/imx/timer.h>. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230328100531.879485-2-u.kleine-koenig@pengutronix.de |
||
Arnd Bergmann
|
23200a4c8a |
clk: pxa: fix NULL pointer dereference in pxa3xx_clk_update_accr
sparse points out an embarrasing bug in an older patch of mine,
which uses the register offset instead of an __iomem pointer:
drivers/clk/pxa/clk-pxa3xx.c:167:9: sparse: sparse: Using plain integer as NULL pointer
Unlike sparse, gcc and clang ignore this bug and fail to warn
because a literal '0' is considered a valid representation of
a NULL pointer.
Fixes:
|
||
Binbin Zhou
|
2a809ddca0 |
clk: clk-loongson2: Zero init clk_init_data
As clk_core_populate_parent_map() checks clk_init_data.num_parents
first, and checks clk_init_data.parent_names[] before
clk_init_data.parent_data[] and clk_init_data.parent_hws[].
Therefore the clk_init_data structure needs to be explicitly initialised
to prevent an unexpected crash if clk_init_data.parent_names[] is a
random value.
CPU 0 Unable to handle kernel paging request at virtual address 0000000000000dc0, era == 9000000002986290, ra == 900000000298624c
Oops[#1]:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-rc2+ #4582
pc 9000000002986290 ra 900000000298624c tp 9000000100094000 sp 9000000100097a60
a0 9000000104541e00 a1 0000000000000000 a2 0000000000000dc0 a3 0000000000000001
a4 90000001000979f0 a5 90000001800977d7 a6 0000000000000000 a7 900000000362a000
t0 90000000034f3548 t1 6f8c2a9cb5ab5f64 t2 0000000000011340 t3 90000000031cf5b0
t4 0000000000000dc0 t5 0000000000000004 t6 0000000000011300 t7 9000000104541e40
t8 000000000005a4f8 u0 9000000104541e00 s9 9000000104541e00 s0 9000000104bc4700
s1 9000000104541da8 s2 0000000000000001 s3 900000000356f9d8 s4 ffffffffffffffff
s5 0000000000000000 s6 0000000000000dc0 s7 90000000030d0a88 s8 0000000000000000
ra: 900000000298624c __clk_register+0x228/0x84c
ERA: 9000000002986290 __clk_register+0x26c/0x84c
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
BADV: 0000000000000dc0
PRID: 0014a000 (Loongson-64bit, )
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____))
Stack : 90000000031c1810 90000000030d0a88 900000000325bac0 90000000034f3548
90000001002ab410 9000000104541e00 0000000000000dc0 9000000003150098
90000000031c1810 90000000031a0460 900000000362a000 90000001002ab410
900000000362a000 9000000104541da8 9000000104541de8 90000001002ab410
900000000362a000 9000000002986a68 90000000034f3ed8 90000000030d0aa8
9000000104541da8 900000000298d3b8 90000000031c1810 0000000000000000
90000000034f3ed8 90000000030d0aa8 0000000000000dc0 90000000030d0a88
90000001002ab410 900000000298d401 0000000000000000 6f8c2a9cb5ab5f64
90000000034f4000 90000000030d0a88 9000000003a48a58 90000001002ab410
9000000104bd81a8 900000000298d484 9000000100020260 0000000000000000
...
Call Trace:
[<9000000002986290>] __clk_register+0x26c/0x84c
[<9000000002986a68>] devm_clk_hw_register+0x5c/0xe0
[<900000000298d3b8>] loongson2_clk_register.constprop.0+0xdc/0x10c
[<900000000298d484>] loongson2_clk_probe+0x9c/0x4ac
[<9000000002a4eba4>] platform_probe+0x68/0xc8
[<9000000002a4bf80>] really_probe+0xbc/0x2f0
[<9000000002a4c23c>] __driver_probe_device+0x88/0x128
[<9000000002a4c318>] driver_probe_device+0x3c/0x11c
[<9000000002a4c5dc>] __driver_attach+0x98/0x18c
[<9000000002a49ca0>] bus_for_each_dev+0x80/0xe0
[<9000000002a4b0dc>] bus_add_driver+0xfc/0x1ec
[<9000000002a4d4a8>] driver_register+0x68/0x134
[<90000000020f0110>] do_one_initcall+0x50/0x188
[<9000000003150f00>] kernel_init_freeable+0x224/0x294
[<90000000030240fc>] kernel_init+0x20/0x110
[<90000000020f1568>] ret_from_kernel_thread+0xc/0xa4
Fixes:
|
||
Markus Schneider-Pargmann
|
a1043fbc8f |
clk: mediatek: mt8365: Fix inverted topclk operations
The given operations are inverted for the wrong registers which makes
multiple of the mt8365 hardware units unusable. In my setup at least usb
did not work.
Fixed by swapping the operations with the inverted ones.
Reported-by: Alexandre Mergnat <amergnat@baylibre.com>
Fixes:
|
||
Sebastian Reichel
|
d54fb4b25a |
clk: composite: Fix handling of high clock rates
ULONG_MAX is used by a few drivers to figure out the highest available
clock rate via clk_round_rate(clk, ULONG_MAX). Since abs() takes a
signed value as input, the current logic effectively calculates with
ULONG_MAX = -1, which results in the worst parent clock being chosen
instead of the best one.
For example on Rockchip RK3588 the eMMC driver tries to figure out
the highest available clock rate. There are three parent clocks
available resulting in the following rate diffs with the existing
logic:
GPLL: abs(18446744073709551615 - 1188000000) = 1188000001
CPLL: abs(18446744073709551615 - 1500000000) = 1500000001
XIN24M: abs(18446744073709551615 - 24000000) = 24000001
As a result the clock framework will promote a maximum supported
clock rate of 24 MHz, even though 1.5GHz are possible. With the
updated logic any casting between signed and unsigned is avoided
and the numbers look like this instead:
GPLL: 18446744073709551615 - 1188000000 = 18446744072521551615
CPLL: 18446744073709551615 - 1500000000 = 18446744072209551615
XIN24M: 18446744073709551615 - 24000000 = 18446744073685551615
As a result the parent with the highest acceptable rate is chosen
instead of the parent clock with the lowest one.
Cc: stable@vger.kernel.org
Fixes:
|
||
Alexandre Mergnat
|
3d6f6d2b58 |
clk: mediatek: mt8365: Fix index issue
Before the patch [1], the clock probe was done directly in the clk-mt8365 driver. In this probe function, the array which stores the data clocks is sized using the higher defined numbers (*_NR_CLOCK) in the clock lists [2]. Currently, with the patch [1], the specific clk-mt8365 probe function is replaced by the mtk generic one [3], which size the clock data array by adding all the clock descriptor array size provided by the clk-mt8365 driver. Actually, all clock indexes come from the header file [2], that mean, if there are more clock (then more index) in the header file [2] than the number of clock declared in the clock descriptor arrays (which is the case currently), the clock data array will be undersized and then the generic probe function will overflow when it will try to write in "clk_data[CLK_INDEX]". Actually, instead of crashing at boot, the probe function returns an error in the log which looks like: "of_clk_hw_onecell_get: invalid index 135", then this clock isn't enabled. Solve this issue by adding in the driver the missing clocks declared in the header clock file [2]. [1]: Commit |
||
|
Sebastian Reichel
|
c20e8c5b12 |
mfd: rk808: Split into core and i2c
Split rk808 into a core and an i2c part in preparation for SPI support. Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64 Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230504173618.142075-6-sebastian.reichel@collabora.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Sebastian Reichel
|
2dc51ca822 |
clk: RK808: Reduce 'struct rk808' usage
Reduce usage of 'struct rk808' (driver data of the parent MFD), so that only the chip variant field is still being accessed directly. This allows restructuring the MFD driver to support SPI based PMICs. Acked-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64 Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230504173618.142075-2-sebastian.reichel@collabora.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Linus Torvalds
|
d6b8a8c49a |
A couple more patches that would be good to get into -rc1.
- Revert an i.MX patch that's causing video failures because division
math goes sideways
- Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit
variable instead of the usual u64 type
- Fix a Kconfig bug in the StarFive JH7110 clk config that selects a
reset controller when it can't be selected
-----BEGIN PGP SIGNATURE-----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=IxvN
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple more patches that would be good to get into -rc1:
- Revert an i.MX patch that's causing video failures because division
math goes sideways
- Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit
variable instead of the usual u64 type
- Fix a Kconfig bug in the StarFive JH7110 clk config that selects a
reset controller when it can't be selected"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case
clk: sp7021: Adjust width of _m in HWM_FIELD_PREP()
Revert "clk: imx: composite-8m: Add support to determine_rate"
|
||
Hal Feng
|
31c6ed4e89 |
clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case
When (ARCH_STARFIVE [=n] && COMPILE_TEST [=y] && RESET_CONTROLLER [=n]), RESET_STARFIVE_JH7110 can't be selected by CLK_STARFIVE_JH7110_SYS and CLK_STARFIVE_JH7110_AON. Add a condition `if RESET_CONTROLLER` to fix it. Also, delete redundant selected options of CLK_STARFIVE_JH7110_AON because these options are already selected by the dependency. Fixes: |
||
Nathan Chancellor
|
5c667d5a5a |
clk: sp7021: Adjust width of _m in HWM_FIELD_PREP()
When building with clang + W=1, there is a warning around an internal
comparison check within the FIELD_PREP() macro, due to a 32-bit variable
comparison against ~0ull:
drivers/clk/clk-sp7021.c:316:8: error: result of comparison of constant 18446744073709551615 with expression of type 'typeof (_Generic((_m), ...' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
r0 |= HWM_FIELD_PREP(MASK_SEL_FRA, clk->p[SEL_FRA]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/clk/clk-sp7021.c:45:15: note: expanded from macro 'HWM_FIELD_PREP'
(_m << 16) | FIELD_PREP(_m, value); \
^~~~~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:114:3: note: expanded from macro 'FIELD_PREP'
__BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:71:53: note: expanded from macro '__BF_FIELD_CHECK'
BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) > \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/compiler_types.h:397:22: note: expanded from macro 'compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:385:23: note: expanded from macro '_compiletime_assert'
__compiletime_assert(condition, msg, prefix, suffix)
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:377:9: note: expanded from macro '__compiletime_assert'
if (!(condition)) \
^~~~~~~~~
This is expected given the types of the input. Increase the size of the
temporary variable in HWM_FIELD_PREP() to eliminate the warning, which
follows the logic of commit
|
||
Adam Ford
|
690dccc4a0 |
Revert "clk: imx: composite-8m: Add support to determine_rate"
This reverts commit
|
||
|
Linus Torvalds
|
e81507acdc |
Nothing looks out of the ordinary in this batch of clk driver updates. There
are a couple patches to the core clk framework, but they're all basically
cleanups or debugging aids. The driver updates and new additions are dominated
in the diffstat by Qualcomm and MediaTek drivers. Qualcomm gained a handful of
new drivers for various SoCs, and MediaTek gained a bunch of drivers for
MT8188. The MediaTek drivers are being modernized as well, so there are
updates all over that vendor's clk drivers. There's also a couple other new clk
drivers in here, for example the Starfive JH7110 SoC support is added.
Outside of the two major SoC vendors though, we have the usual collection of
non-critical fixes and cleanups to various clk drivers. It's good to see that
we're getting more cleanups and modernization patches. Maybe one day we'll be
able to properly split clk providers from clk consumers.
Core:
- Print an informational message before disabling unused clks
New Drivers:
- BCM63268 timer clock and reset controller
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Clk driver support for Loongson-2 SoCs
- Clock driver for Skyworks Si521xx I2C PCIe clock generators
- Initial Starfive JH7110 clk/reset support
- Global clock controller drivers for Qualcomm SM7150, IPQ9574, MSM8917 and IPQ5332 SoCs
- GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P SoCs
Updates:
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
- Convert platform clk drivers to remove_new()
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Reimplement Loongson-1 clk driver with DT support
- Migrate socfpga clk driver to of_clk_add_hw_provider()
- Support for i3c clks on Aspeed ast2600 SoCs
- Add clock generic devm_clk_hw_register_gate_parent_data
- Add audiomix block control for i.MX8MP
- Add support for determine_rate to i.MX composite-8m
- Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
- Provide clock name in error message for clk-gpr-mux on get parent failure
- Drop duplicate imx_clk_mux_flags macro
- Register the i.MX8MP Media Disp2 Pix clock as bus clock
- Add Media LDB root clock to i.MX8MP
- Make i.MX8MP nand_usdhc_bus clock as non-critical
- Fix the rate table for i.MX fracn-gppll
- Disable HW control for the fracn-gppll in order to be controlled by
register write
- Add support for interger PLL in fracn-gppll
- Add mcore_booted module parameter to i.MX93 provider
- Add NIC, A55 and ARM PLL clocks to i.MX93
- Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
- Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to
get more accurate clock rates
- Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
- Update some of the i.MX critical clocks flags to allow glitchless
on-the-fly rate change.
- Add I2C5 clock on Renesas R-Car V3H
- Exynos850: Add CMU_G3D clock controller for the Mali GPU
- Extract Exynos5433 (ARM64) clock controller power management code to
common driver parts
- Exynos850: make PMU_ALIVE_PCLK clock critical
- Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car V4H
- Add video capture (VIN) clocks on Renesas R-Car V3H
- Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
- Support for Stromer Plus PLL on Qualcomm IPQ5332
- Add a missing reset to Qualcomm QCM2290
- Migrate Qualcomm IPQ4019 to clk_parent_data
- Make USB GDSCs enter retention state when disabled on Qualcomm SM6375,
MSM8996 and MSM8998 SoCs
- Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
- Add two EMAC GDSCs on Qualcomm SC8280XP
- Use shared rcg clk ops in Qualcomm SM6115 GCC
- Park Qualcomm SM8350 PCIe PIPE clks when disabled
- Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
- Add missing XO clocks to Qualcomm MSM8226 and MSM8974
- Convert some Qualcomm clk DT bindings to YAML
- Reparenting fix for the clock supplying camera modules on Rockchip rk3399
- Mark more critical (bus-)clocks on Rockchip rk3588
-----BEGIN PGP SIGNATURE-----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=bTtL
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Nothing looks out of the ordinary in this batch of clk driver updates.
There are a couple patches to the core clk framework, but they're all
basically cleanups or debugging aids. The driver updates and new
additions are dominated in the diffstat by Qualcomm and MediaTek
drivers. Qualcomm gained a handful of new drivers for various SoCs,
and MediaTek gained a bunch of drivers for MT8188. The MediaTek
drivers are being modernized as well, so there are updates all over
that vendor's clk drivers. There's also a couple other new clk drivers
in here, for example the Starfive JH7110 SoC support is added.
Outside of the two major SoC vendors though, we have the usual
collection of non-critical fixes and cleanups to various clk drivers.
It's good to see that we're getting more cleanups and modernization
patches. Maybe one day we'll be able to properly split clk providers
from clk consumers.
Core:
- Print an informational message before disabling unused clks
New Drivers:
- BCM63268 timer clock and reset controller
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Clk driver support for Loongson-2 SoCs
- Clock driver for Skyworks Si521xx I2C PCIe clock generators
- Initial Starfive JH7110 clk/reset support
- Global clock controller drivers for Qualcomm SM7150, IPQ9574,
MSM8917 and IPQ5332 SoCs
- GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
SoCs
Updates:
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
- Convert platform clk drivers to remove_new()
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Reimplement Loongson-1 clk driver with DT support
- Migrate socfpga clk driver to of_clk_add_hw_provider()
- Support for i3c clks on Aspeed ast2600 SoCs
- Add clock generic devm_clk_hw_register_gate_parent_data
- Add audiomix block control for i.MX8MP
- Add support for determine_rate to i.MX composite-8m
- Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
- Provide clock name in error message for clk-gpr-mux on get parent
failure
- Drop duplicate imx_clk_mux_flags macro
- Register the i.MX8MP Media Disp2 Pix clock as bus clock
- Add Media LDB root clock to i.MX8MP
- Make i.MX8MP nand_usdhc_bus clock as non-critical
- Fix the rate table for i.MX fracn-gppll
- Disable HW control for the fracn-gppll in order to be controlled by
register write
- Add support for interger PLL in fracn-gppll
- Add mcore_booted module parameter to i.MX93 provider
- Add NIC, A55 and ARM PLL clocks to i.MX93
- Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
- Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
to get more accurate clock rates
- Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
- Update some of the i.MX critical clocks flags to allow glitchless
on-the-fly rate change.
- Add I2C5 clock on Renesas R-Car V3H
- Exynos850: Add CMU_G3D clock controller for the Mali GPU
- Extract Exynos5433 (ARM64) clock controller power management code
to common driver parts
- Exynos850: make PMU_ALIVE_PCLK clock critical
- Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
V4H
- Add video capture (VIN) clocks on Renesas R-Car V3H
- Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
- Support for Stromer Plus PLL on Qualcomm IPQ5332
- Add a missing reset to Qualcomm QCM2290
- Migrate Qualcomm IPQ4019 to clk_parent_data
- Make USB GDSCs enter retention state when disabled on Qualcomm
SM6375, MSM8996 and MSM8998 SoCs
- Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
- Add two EMAC GDSCs on Qualcomm SC8280XP
- Use shared rcg clk ops in Qualcomm SM6115 GCC
- Park Qualcomm SM8350 PCIe PIPE clks when disabled
- Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
- Add missing XO clocks to Qualcomm MSM8226 and MSM8974
- Convert some Qualcomm clk DT bindings to YAML
- Reparenting fix for the clock supplying camera modules on Rockchip
rk3399
- Mark more critical (bus-)clocks on Rockchip rk3588"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
clk: rockchip: rk3588: make gate linked clocks critical
clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
clk: qcom: add the GPUCC driver for sa8775p
dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
clk: starfive: Avoid casting iomem pointers
clk: microchip: fix potential UAF in auxdev release callback
clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
clk: mediatek: fhctl: Mark local variables static
clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
clk: uniphier: Use managed `of_clk_add_hw_provider()`
clk: si5351: Use managed `of_clk_add_hw_provider()`
clk: si570: Use managed `of_clk_add_hw_provider()`
clk: si514: Use managed `of_clk_add_hw_provider()`
clk: lmk04832: Use managed `of_clk_add_hw_provider()`
...
|
||
|
Linus Torvalds
|
b6a7828502 |
modules-6.4-rc1
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
|
||
Stephen Boyd
|
a9863979fb |
Merge branch 'clk-imx' into clk-next
* clk-imx: (25 commits) clk: imx: imx8ulp: update clk flag for system critical clock clk: imx: imx8ulp: Add tpm5 clock as critical gate clock clk: imx: imx8ulp: keep MU0_B clock enabled always clk: imx: imx8ulp: Add divider closest support to get more accurate clock rate clk: imx: imx8ulp: Fix XBAR_DIVBUS and AD_SLOW clock parents clk: imx: imx93: Add nic and A55 clk dt-bindings: clock: imx93: add NIC, A55 and ARM PLL CLK clk: imx: imx93: add mcore_booted module paratemter clk: imx: fracn-gppll: Add 300MHz freq support for imx9 clk: imx: fracn-gppll: support integer pll clk: imx: fracn-gppll: disable hardware select control clk: imx: fracn-gppll: fix the rate table clk: imx: imx8mp: change the 'nand_usdhc_bus' clock to non-critical clk: imx: imx8mp: Add LDB root clock dt-bindings: clock: imx8mp: Add LDB clock entry clk: imx: imx8mp: correct DISP2 pixel clock type clk: imx: drop duplicated macro clk: imx: clk-gpr-mux: Provide clock name in error message clk: imx: Let IMX8MN_CLK_DISP_PIXEL set parent rate clk: imx8mm: Let IMX8MM_CLK_LCDIF_PIXEL set parent rate ... |
||
|
Stephen Boyd
|
c19c6c7b44 |
Merge branches 'clk-of', 'clk-samsung', 'clk-rockchip' and 'clk-qcom' into clk-next
* clk-of: clk: add missing of_node_put() in "assigned-clocks" property parsing * clk-samsung: clk: samsung: exynos850: Make PMU_ALIVE_PCLK critical clk: samsung: Convert to platform remove callback returning void clk: samsung: exynos5433: Extract PM support to common ARM64 layer clk: samsung: Extract parent clock enabling to common function clk: samsung: Extract clocks registration to common function clk: samsung: exynos850: Add AUD and HSI main gate clocks clk: samsung: exynos850: Implement CMU_G3D domain clk: samsung: clk-pll: Implement pll0818x PLL type clk: samsung: Set dev in samsung_clk_init() clk: samsung: Don't pass reg_base to samsung_clk_register_pll() clk: samsung: Remove np argument from samsung_clk_init() dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D * clk-rockchip: clk: rockchip: rk3588: make gate linked clocks critical clk: rockchip: rk3399: allow clk_cifout to force clk_cifout_src to reparent * clk-qcom: (57 commits) clk: qcom: gcc-sc8280xp: Add EMAC GDSCs clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk clk: qcom: add the GPUCC driver for sa8775p dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property clk: qcom: rpm: Use managed `of_clk_add_hw_provider()` clk: qcom: Add Global Clock Controller driver for IPQ9574 dt-bindings: clock: Add ipq9574 clock and reset definitions clk: qcom: gpucc-sm6375: Configure CX_GDSC disable wait value clk: qcom: gcc-sm6115: Mark RCGs shared where applicable clk: qcom: dispcc-qcm2290: Add MDSS_CORE reset dt-bindings: clock: dispcc-qcm2290: Add MDSS_CORE reset clk: qcom: apss-ipq-pll: add support for IPQ5332 dt-bindings: clock: qcom,a53pll: add IPQ5332 compatible clk: qcom: apss-ipq-pll: refactor the driver to accommodate different PLL types dt-bindings: mailbox: qcom,apcs-kpss-global: fix SDX55 'if' match dt-bindings: mailbox: qcom,apcs-kpss-global: correct SDX55 clocks ... |
||
|
Stephen Boyd
|
1a86e99fa0 |
Merge branches 'clk-starfive', 'clk-fractional' and 'clk-devmof' into clk-next
- Shrink size of clk_fractional_divider a little - Convert various clk drivers to devm_of_clk_add_hw_provider() * clk-starfive: clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers clk: starfive: Avoid casting iomem pointers MAINTAINERS: generalise StarFive clk/reset entries reset: starfive: Add StarFive JH7110 reset driver clk: starfive: Add StarFive JH7110 always-on clock driver clk: starfive: Add StarFive JH7110 system clock driver reset: starfive: jh71x0: Use 32bit I/O on 32bit registers reset: starfive: Rename "jh7100" to "jh71x0" for the common code reset: starfive: Extract the common JH71X0 reset code reset: starfive: Factor out common JH71X0 reset code reset: Create subdirectory for StarFive drivers reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE clk: starfive: Rename "jh7100" to "jh71x0" for the common code clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h clk: starfive: Factor out common JH7100 and JH7110 code clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator dt-bindings: clock: Add StarFive JH7110 system clock and reset generator * clk-fractional: clk: Remove mmask and nmask fields in struct clk_fractional_divider clk: rockchip: Remove values for mmask and nmask in struct clk_fractional_divider clk: imx: Remove values for mmask and nmask in struct clk_fractional_divider clk: Compute masks for fractional_divider clk when needed. * clk-devmof: clk: uniphier: Use managed `of_clk_add_hw_provider()` clk: si5351: Use managed `of_clk_add_hw_provider()` clk: si570: Use managed `of_clk_add_hw_provider()` clk: si514: Use managed `of_clk_add_hw_provider()` clk: lmk04832: Use managed `of_clk_add_hw_provider()` clk: hsdk-pll: Use managed `of_clk_add_hw_provider()` clk: cdce706: Use managed `of_clk_add_hw_provider()` clk: axs10x: Use managed `of_clk_add_hw_provider()` clk: axm5516: Use managed `of_clk_add_hw_provider()` clk: axi-clkgen: Use managed `of_clk_add_hw_provider()` |
||
|
Stephen Boyd
|
caca6ad367 |
Merge branches 'clk-xilinx', 'clk-broadcom' and 'clk-platform' into clk-next
- BCM63268 timer clock and reset controller - Convert platform clk drivers to remove_new * clk-xilinx: clocking-wizard: Support higher frequency accuracy clk: zynqmp: pll: Remove the limit * clk-broadcom: clk: bcm: Add BCM63268 timer clock and reset driver dt-bindings: clock: Add BCM63268 timer binding dt-bindings: reset: add BCM63268 timer reset definitions dt-bindings: clk: add BCM63268 timer clock definitions * clk-platform: (25 commits) clk: xilinx: Convert to platform remove callback returning void clk: x86: Convert to platform remove callback returning void clk: uniphier: Convert to platform remove callback returning void clk: ti: Convert to platform remove callback returning void clk: tegra: Convert to platform remove callback returning void clk: stm32: Convert to platform remove callback returning void clk: mvebu: Convert to platform remove callback returning void clk: mmp: Convert to platform remove callback returning void clk: keystone: Convert to platform remove callback returning void clk: hisilicon: Convert to platform remove callback returning void clk: stm32mp1: Convert to platform remove callback returning void clk: scpi: Convert to platform remove callback returning void clk: s2mps11: Convert to platform remove callback returning void clk: pwm: Convert to platform remove callback returning void clk: palmas: Convert to platform remove callback returning void clk: hsdk-pll: Convert to platform remove callback returning void clk: fixed-rate: Convert to platform remove callback returning void clk: fixed-mmio: Convert to platform remove callback returning void clk: fixed-factor: Convert to platform remove callback returning void clk: axm5516: Convert to platform remove callback returning void ... |
||
|
Stephen Boyd
|
6f7478e3bb |
Merge branches 'clk-mediatek', 'clk-sunplus', 'clk-loongson' and 'clk-socfpga' into clk-next
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Reimplement Loongson-1 clk driver with DT support - Clk driver support for Loongson-2 SoCs - Migrate socfpga clk driver to of_clk_add_hw_provider() * clk-mediatek: (84 commits) clk: mediatek: fhctl: Mark local variables static clk: mediatek: Use right match table, include mod_devicetable clk: mediatek: Add MT8188 adsp clock support clk: mediatek: Add MT8188 imp i2c wrapper clock support clk: mediatek: Add MT8188 wpesys clock support clk: mediatek: Add MT8188 vppsys1 clock support clk: mediatek: Add MT8188 vppsys0 clock support clk: mediatek: Add MT8188 vencsys clock support clk: mediatek: Add MT8188 vdosys1 clock support clk: mediatek: Add MT8188 vdosys0 clock support clk: mediatek: Add MT8188 vdecsys clock support clk: mediatek: Add MT8188 mfgcfg clock support clk: mediatek: Add MT8188 ipesys clock support clk: mediatek: Add MT8188 imgsys clock support clk: mediatek: Add MT8188 ccusys clock support clk: mediatek: Add MT8188 camsys clock support clk: mediatek: Add MT8188 infrastructure clock support clk: mediatek: Add MT8188 peripheral clock support clk: mediatek: Add MT8188 topckgen clock support clk: mediatek: Add MT8188 apmixedsys clock support ... * clk-sunplus: clk: Add Sunplus SP7021 clock driver * clk-loongson: clk: clk-loongson2: add clock controller driver support dt-bindings: clock: add loongson-2 boot clock index MAINTAINERS: remove obsolete file entry in MIPS/LOONGSON1 ARCHITECTURE MIPS: loongson32: Update the clock initialization clk: loongson1: Re-implement the clock driver clk: loongson1: Remove the outdated driver dt-bindings: clock: Add Loongson-1 clock * clk-socfpga: clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling |
||
|
Stephen Boyd
|
4ec6a2f957 |
Merge branches 'clk-cleanup', 'clk-aspeed', 'clk-dt', 'clk-renesas' and 'clk-skyworks' into clk-next
- Support for i3c clks on Aspeed ast2600 SoCs - Clock driver for Skyworks Si521xx I2C PCIe clock generators * clk-cleanup: clk: microchip: fix potential UAF in auxdev release callback clk: sifive: make SiFive clk drivers depend on ARCH_ symbols clk: stm32h7: Remove an unused field in struct stm32_fractional_divider clk: tegra20: fix gcc-7 constant overflow warning clock: milbeaut: use devm_platform_get_and_ioremap_resource() clk: Print an info line before disabling unused clocks clk: ti: Use of_address_to_resource() clk: remove unnecessary (void*) conversions clk: at91: clk-sam9x60-pll: fix return value check clk: visconti: remove unused visconti_pll_provider::regmap * clk-aspeed: dt-bindings: clock: ast2600: Expand comment on reset definitions clk: ast2600: Add comment about combined clock + reset handling dt-bindings: clock: ast2600: remove IC36 & I3C7 clock definitions clk: ast2600: Add full configs for I3C clocks dt-bindings: clock: ast2600: Add top-level I3C clock clk: ast2600: allow empty entries in aspeed_g6_gates * clk-dt: clk: mediatek: clk-pllfh: fix missing of_node_put() in fhctl_parse_dt() clk: Use of_property_present() for testing DT property presence * clk-renesas: clk: renesas: r8a77980: Add I2C5 clock clk: rs9: Add support for 9FGV0441 clk: rs9: Support device specific dif bit calculation dt-bindings: clk: rs9: Add 9FGV0441 clk: rs9: Check for vendor/device ID clk: renesas: Convert to platform remove callback returning void clk: renesas: r9a06g032: Improve clock tables clk: renesas: r9a06g032: Document structs clk: renesas: r9a06g032: Drop unused fields clk: renesas: r9a06g032: Improve readability clk: renesas: r8a77980: Add Z2 clock clk: renesas: r8a77970: Add Z2 clock clk: renesas: r8a77995: Fix VIN parent clock clk: renesas: r8a77980: Add VIN clocks clk: renesas: r8a779g0: Add VIN clocks clk: renesas: r8a779g0: Add ISPCS clocks clk: renesas: r8a779g0: Add CSI-2 clocks clk: renesas: r8a779g0: Add thermal clock clk: renesas: r8a779g0: Add Audio clocks clk: renesas: cpg-mssr: Update MSSR register range for R-Car V4H * clk-skyworks: clk: si521xx: Clock driver for Skyworks Si521xx I2C PCIe clock generators dt-bindings: clk: si521xx: Add Skyworks Si521xx I2C PCIe clock generators |
||
Andrew Halaney
|
32c2f2a46d |
clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
Add the EMAC GDSCs to allow the EMAC hardware to be enabled. Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230413191541.1073027-2-ahalaney@redhat.com |
||
|
Hal Feng
|
c19d966e11 |
clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
The dev_set_drvdata() is no longer needed after we used a wrapper
struct to get the data in auxiliary driver.
Cc: Xingyu Wu <xingyu.wu@starfivetech.com>
Fixes:
|
||
|
Sebastian Reichel
|
64042c28c3 |
clk: rockchip: rk3588: make gate linked clocks critical
RK3588 has a couple of hardware blocks called Native Interface Unit
(NIU) that gate the clocks to devices behind them. Effectively this
means that some clocks require two parent clocks being enabled.
Downstream implemented this by using a separate clock driver
("clk-link") for them, which enables the second clock using PM
framework.
In the upstream kernel we are currently missing support for the second
parent. The information about it is in the GATE_LINK() macro as
linkname, but that is not used. Thus the second parent clock is not
properly enabled. So far this did not really matter, since these clocks
are mostly required for the more advanced IP blocks, that are not yet
supported upstream. As this is about to change we need a fix. There
are three options available:
1. Properly implement support for having two parent clocks in the
clock framework.
2. Mark the affected clocks CLK_IGNORE_UNUSED, so that they are not
disabled. This wastes some power, but keeps the hack contained
within the clock driver. Going from this to the first solution
is easy once that has been implemented.
3. Enabling the extra clock in the consumer driver. This leaks some
implementation details into DT.
This patch implements the second option as an intermediate solution
until the first one is available. I used an alias for CLK_IS_CRITICAL,
so that it's easy to see which clocks are not really critical once
the clock framework supports a better way to implement this.
Tested-by: Vincent Legoll <vincent.legoll@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230403193250.108693-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
||
Konrad Dybcio
|
68d1151f03 |
clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
There's only one DSI PHY on this SoC. Remove the ghost entry for the
clock produced by a secondary one.
Fixes:
|
||
Shazad Hussain
|
0afa16afc3 |
clk: qcom: add the GPUCC driver for sa8775p
Add the clock driver for the Qualcomm Graphics Clock control module. Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com> [Bartosz: make ready for upstream] Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230411125910.401075-3-brgl@bgdev.pl |
||
Dmitry Baryshkov
|
1a500e0bc9 |
clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
On SM8350 platform the PCIe PIPE clocks require additional handling to
function correctly. They are to be switched to the tcxo source before
turning PCIe GDSCs off and should be switched to PHY PIPE source once
they are working. Switch PCIe PHY clocks to use clk_regmap_phy_mux_ops,
which provide support for this dance.
Fixes:
|
||
Mohammad Rafi Shaik
|
aad09fc7c4 |
clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
Add GDSCs in lpass_cc_sc7280_desc struct.
When qcom,adsp-pil-mode is enabled, GDSCs required to solve
dependencies in lpass_audiocc probe().
Fixes:
|
||
Srinivasa Rao Mandadapu
|
4fc1c2d9a2 |
clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
The qdsp6ss memory region is being shared by ADSP remoteproc device and
lpasscc clock device, hence causing memory conflict.
To avoid this, when qdsp6ss clocks are being enabled in remoteproc driver,
skip qdsp6ss clock registration if "qcom,adsp-pil-mode" is enabled and
also assign max_register value.
Fixes:
|
||
|
Stephen Boyd
|
d1aae06630 |
clk: starfive: Avoid casting iomem pointers
Let's use a wrapper struct for the auxiliary_device made in
jh7110_reset_controller_register() so that we can stop casting iomem
pointers. The casts trip up tools like sparse, and make for some awkward
casts that are largely unnecessary. While we're here, change the
allocation from devm and actually free the auxiliary_device memory in
the release function. This avoids any use after free problems where the
parent device driver is unbound from the device but the
auxiliuary_device is still in use accessing devm freed memory.
Cc: Tommaso Merciai <tomm.merciai@gmail.com>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Hal Feng <hal.feng@starfivetech.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Xingyu Wu <xingyu.wu@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes:
|
||
Conor Dooley
|
7455b7007b |
clk: microchip: fix potential UAF in auxdev release callback
Similar to commit |
||
Nick Alcock
|
00c8682a78 |
clk: microchip: mpfs: remove MODULE_LICENSE in non-modules
Since commit
|
||
|
Nick Alcock
|
355a1a4b68 |
clk: renesas: remove MODULE_LICENSE in non-modules
Since commit
|
||
|
Nick Alcock
|
f6f5f91cc8 |
clk: bm1880: remove MODULE_LICENSE in non-modules
Since commit
|
||
Lars-Peter Clausen
|
f1f67db9d6 |
clk: qcom: rpm: Use managed of_clk_add_hw_provider()
Use the managed `devm_of_clk_add_hw_provider()` instead of `of_clk_add_hw_provider()`. This makes sure the provider gets automatically removed on unbind and allows to completely eliminate the drivers `remove()` callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230410014502.27929-7-lars@metafoo.de |
||
Tom Rix
|
cb9eee590a |
clk: mediatek: fhctl: Mark local variables static
smatch reports
drivers/clk/mediatek/clk-fhctl.c:17:27: warning: symbol
'fhctl_offset_v1' was not declared. Should it be static?
drivers/clk/mediatek/clk-fhctl.c:30:27: warning: symbol
'fhctl_offset_v2' was not declared. Should it be static?
These variables are only used in one file so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230406010935.1944976-1-trix@redhat.com
Fixes:
|
||
|
Conor Dooley
|
fb8b9d23f1 |
clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the use of such symbols on other architectures, convert the SiFive clk drivers to use the new symbol. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230406-groovy-trustable-15853ac0a130@spud Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Lars-Peter Clausen
|
c0e1952843 |
clk: uniphier: Use managed of_clk_add_hw_provider()
Use the managed `devm_of_clk_add_hw_provider()` instead of `of_clk_add_hw_provider()`. This makes sure the provider gets automatically removed on unbind and allows to completely eliminate the drivers `remove()` callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230410014502.27929-11-lars@metafoo.de Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Lars-Peter Clausen
|
361dde3c28 |
clk: si5351: Use managed of_clk_add_hw_provider()
Use the managed `devm_of_clk_add_hw_provider()` instead of `of_clk_add_hw_provider()`. This makes sure the provider gets automatically removed on unbind and allows to completely eliminate the drivers `remove()` callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230410014502.27929-10-lars@metafoo.de Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Lars-Peter Clausen
|
bda73391c8 |
clk: si570: Use managed of_clk_add_hw_provider()
Use the managed `devm_of_clk_add_hw_provider()` instead of `of_clk_add_hw_provider()`. This makes sure the provider gets automatically removed on unbind and allows to completely eliminate the drivers `remove()` callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230410014502.27929-9-lars@metafoo.de Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Lars-Peter Clausen
|
a7f3b6757a |
clk: si514: Use managed of_clk_add_hw_provider()
Use the managed `devm_of_clk_add_hw_provider()` instead of `of_clk_add_hw_provider()`. This makes sure the provider gets automatically removed on unbind and allows to completely eliminate the drivers `remove()` callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230410014502.27929-8-lars@metafoo.de Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Lars-Peter Clausen
|
56fc9a343a |
clk: lmk04832: Use managed of_clk_add_hw_provider()
Use the managed `devm_of_clk_add_hw_provider()` instead of `of_clk_add_hw_provider()`. This makes sure the provider gets automatically removed on unbind. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230410014502.27929-6-lars@metafoo.de Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Lars-Peter Clausen
|
56d144d034 |
clk: hsdk-pll: Use managed of_clk_add_hw_provider()
Use the managed `devm_of_clk_add_hw_provider()` instead of `of_clk_add_hw_provider()`. This makes sure the provider gets automatically removed on unbind and allows to completely eliminate the drivers `remove()` callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230410014502.27929-5-lars@metafoo.de Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Lars-Peter Clausen
|
c2e59c7f27 |
clk: cdce706: Use managed of_clk_add_hw_provider()
Use the managed `devm_of_clk_add_hw_provider()` instead of `of_clk_add_hw_provider()`. This makes sure the provider gets automatically removed on unbind and allows to completely eliminate the drivers `remove()` callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230410014502.27929-4-lars@metafoo.de Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Lars-Peter Clausen
|
7bed704f80 |
clk: axs10x: Use managed of_clk_add_hw_provider()
Use the managed `devm_of_clk_add_hw_provider()` instead of `of_clk_add_hw_provider()`. This makes sure the provider gets automatically removed on unbind and allows to completely eliminate the drivers `remove()` callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230410014502.27929-3-lars@metafoo.de Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Lars-Peter Clausen
|
f042ebcfcc |
clk: axm5516: Use managed of_clk_add_hw_provider()
Use the managed `devm_of_clk_add_hw_provider()` instead of `of_clk_add_hw_provider()`. This makes sure the provider gets automatically removed on unbind and allows to completely eliminate the drivers `remove()` callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230410014502.27929-2-lars@metafoo.de Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Lars-Peter Clausen
|
a301528f79 |
clk: axi-clkgen: Use managed of_clk_add_hw_provider()
Use the managed `devm_of_clk_add_hw_provider()` instead of `of_clk_add_hw_provider()`. This makes sure the provider gets automatically removed on unbind and allows to completely eliminate the drivers `remove()` callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230410014502.27929-1-lars@metafoo.de Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Stephen Boyd
|
6aa252ae88 |
clk: renesas: Updates for v6.4 (take two)
- Add I2C5 clock on R-Car V3H. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZDO+egAKCRCKwlD9ZEnx cE3NAQCXNUT4SKw+yhm7pFfEHelq89SCQs/VVimfM3eCwR76bgD/VqeYtxuRseFz mHSbJ/G7D+doUrQlcuyfuMAGfHUWSgQ= =WGYE -----END PGP SIGNATURE----- Merge tag 'renesas-clk-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas Pull one more Renesas clk driver update from Geert Uytterhoeven: - Add I2C5 clock on R-Car V3H * tag 'renesas-clk-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: r8a77980: Add I2C5 clock |