The LED for the mic mute button is controlled by GPIO2.
The mute button LED is slightly more complex, it's controlled by two bits
in coeff 0x0b.
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/2693091.mvXUDI8C0e@fabians-envy
Signed-off-by: Takashi Iwai <tiwai@suse.de>
struct i2c_driver::probe_new is about to go away. Switch the driver to
use the probe callback with the same prototype.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Link: https://lore.kernel.org/r/20230824200219.9569-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the UMP Endpoint is declared as "static", that is, no dynamic
reassignment of UMP Groups, it makes little sense to expose always all
16 groups with 16 substreams. Many of those substreams are disabled
groups, hence they are useless, but applications don't know it and try
to open / access all those substreams unnecessarily.
This patch limits the number of UMP legacy rawmidi substreams only to
the active groups. The behavior is changed only for the static
endpoint (i.e. devices without UMP v1.1 feature implemented or with
the static block flag is set).
Fixes: 0b5288f5fe ("ALSA: ump: Add legacy raw MIDI support")
Link: https://lore.kernel.org/r/20230824075108.29958-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To make it clearer which legacy substream corresponds to which UMP
group, fill the subname field of each substream object with the group
number and the endpoint name, e.g. "Group 1 (My Device)".
Ideally speaking, we should have some better link information to the
derived UMP, but it's another feature extension.
Fixes: 0b5288f5fe ("ALSA: ump: Add legacy raw MIDI support")
Link: https://lore.kernel.org/r/20230824075108.29958-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The legacy rawmidi devices are the shadows of the main UMP devices,
hence it's better to initialize them after all UMP Endpoints are
parsed. Then, at the moment the legacy rawmidi is created, we already
know the static flag or the proper EP name string, and we can fill
those information at UMP core side instead of fiddling the attributes
at a later point.
Fixes: ec362b63c4 ("ALSA: usb-audio: Enable the legacy raw MIDI support")
Link: https://lore.kernel.org/r/20230824075108.29958-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Before committing 79597c8bf6, *rac97 always be NULL if there is
an error. When error happens, make sure *rac97 is NULL is safer.
For examble, in snd_vortex_mixer():
err = snd_ac97_mixer(pbus, &ac97, &vortex->codec);
vortex->isquad = ((vortex->codec == NULL) ?
0 : (vortex->codec->ext_id&0x80));
If error happened but vortex->codec isn't NULL, this may cause some
problems.
Move the judgement order to be clearer and better.
Fixes: 79597c8bf6 ("ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer")
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20230823025212.1000961-1-suhui@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add pause push/release support to the virtual PCM test driver. Add
'suspend' boolean field to the pcmtst_buf_iter structure, so we can
pause the timer without shutting it down. Update the trigger callback
handler correspondingly. Extract buffer initialization to the
'reset_buf_iterator' function since it is used in multiple places now.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230822150541.8450-1-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CS35L41 HDA driver requires ACPI to contain correct _DSD properties to
correctly configure the device. Whilst the HP Zbook Fury 17 G9 contains
valid _DSD properties, the boost type has been configured incorrectly
in the _DSD for this laptop. We can override these properties to fix
the boost type.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230823143956.755758-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A relatively large but generally not super urgent set of fixes for ASoC,
including some quirks and a MAINTAINERS update. There's also an update
to cs35l56 to change the firmware ABI, there are no current shipping
systems which use the current interface and the sooner we get the new
interface in the less likely it is that something will start.
It'd be nice if these landed for v6.5 but not the end of the world if
they wait till v6.6.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTmXz0ACgkQJNaLcl1U
h9CsMAf+Mx63RS33aKGrfArRMTIAGDmOLTEqPk4Vhb1zPNYsnpMYPaJ6CoWLw+uA
D+UjNbjLpbYM86n2AyyEzzKhU+TgruyvPAmvTuksmSn8SBBy1n1ZLeBKMj3fBKjB
0FmeR377shDhh/P34Q5xz6SMSs/OqgwRH4gf4pufhTuizVSUHN0ZLONBdEY2vgIm
nlR3ViA/UuMZ9CI3714sm8UWEEpfSyKsGX6pbEjGvG1XaSwrinQqNPsf53A08mZM
wWfNKZ9KYc2W49N2baS9VTxWx5er2H4X41y9swNZ1CQJffKDO9nXUdml0knmhI0o
LRkeEWvcsIPPxfH4WLsg0OjPY/25dw==
=caOM
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.5-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.5
A relatively large but generally not super urgent set of fixes for ASoC,
including some quirks and a MAINTAINERS update. There's also an update
to cs35l56 to change the firmware ABI, there are no current shipping
systems which use the current interface and the sooner we get the new
interface in the less likely it is that something will start.
It'd be nice if these landed for v6.5 but not the end of the world if
they wait till v6.6.
Like a few other drivers, YMFPCI driver needs to clean up with
snd_card_free() call at an error path of the probe; otherwise the
other devres resources are released before the card and it results in
the UAF.
This patch uses the helper for handling the probe error gracefully.
Fixes: f33fc15767 ("ALSA: ymfpci: Create card with device-managed snd_devm_card_new()")
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Closes: https://lore.kernel.org/r/20230823135846.1812-1-takashi.yano@nifty.ne.jp
Link: https://lore.kernel.org/r/20230823161625.5807-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current analog gain TLV seems to have completely incorrect values in
it. The gain starts at 0.5dB, proceeds in 1dB steps, and has no mute
value, correct the control to match.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230823085308.753572-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There have been reports of USB-audio driver spewing errors at the
probe time on a few devices like Jabra and Logitech. The suggested
fix there couldn't be applied as is, unfortunately, because it'll
likely break other devices.
But, the patch suggested an interesting point: looking at the current
init code in stream.c, one may notice that it does initialize
differently from the device setup in endpoint.c. Namely, for UAC1, we
should call snd_usb_init_pitch() and snd_usb_init_sample_rate() after
setting the interface, while the init sequence at parsing calls them
before setting the interface blindly.
This patch changes the init sequence at parsing for UAC1 (and other
devices that need a similar behavior) to be aligned with the rest of
the code, setting the interface at first. And, this fixes the
long-standing problems on a few UAC1 devices like Jabra / Logitech,
as reported, too.
Reported-and-tested-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Closes: https://lore.kernel.org/r/202bbbc0f51522e8545783c4c5577d12a8e2d56d.camel@infinera.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230821111857.28926-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
VivoBook Pro 15 Ryzen Edition uses Ryzen 6800H processor, and adding to
quirks list for acp6x will enable internal mic.
Signed-off-by: BrenoRCBrito <brenorcbrito@gmail.com>
Link: https://lore.kernel.org/r/20230818211417.32167-1-brenorcbrito@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now all ASoC users have been replaced to use the new PCM copy ops,
let's drop the obsoleted copy_user ops and its helper function.
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815190136.8987-25-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Update the documentation about the PCM copy callbacks.
The update was kept minimalistic, just correcting the use of copy_user
ops with the single copy ops, and drop/update the text mentioning the
copy_kernel.
Link: https://lore.kernel.org/r/20230815190136.8987-24-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Along with the conversion to PCM copy ops, use the iov_iter for the
pointer to be passed to the dmaengine process callback, too. It
avoids the direct reference of iter_iov_addr(), and it can potentially
help for the drivers to access memory properly (although both atmel
and stm drivers don't use the given buffer address at all for now).
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Olivier Moysan <olivier.moysan@foss.st.com>
Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20230815190136.8987-23-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the ASoC dmaenging driver code to use the new
unified PCM copy callback. It's a straightforward conversion from
*_user() to *_iter() variants.
The process callback is still using the direct pointer as of now, but
it'll be converted in the next patch.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230815190136.8987-22-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the qcom lpass driver code to use the new unified
PCM copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@quicinc.com>
Link: https://lore.kernel.org/r/20230815190136.8987-21-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the mediatek BT SCO driver code to use the new
unified PCM copy callback. It's a straightforward conversion from
*_user() to *_iter() variants. As copy_form/to_iter() updates the
internal offset at each read/write, we can drop the cur_*_idx counter
in the loop, too.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815190136.8987-20-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For following the ALSA PCM core change, a new PCM copy ops is added
toe ASoC component framework: snd_soc_component_driver receives the
copy ops, and snd_soc_pcm_component_copy() helper is provided.
This also fixes a long-standing potential bug where the ASoC driver
covers only copy_user PCM callback and misses the copy from kernel
pointers (such as OSS PCM layer), too.
As of this patch, the old copy_user is still kept, but it'll be
dropped later after all drivers are converted.
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815190136.8987-19-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the solo6x10 driver code to use the new unified
PCM copy callback. It's a straightforward conversion from *_user() to
*_iter() variants. As copy_to_iter() updates the internal offest at
each write, we can drop the dst counter update in the loop, too.
Note that copy_to_iter() returns the copied bytes, hence the error
condition is adjusted accordingly.
Acked-by: Ismael Luceno <ismael@iodev.co.uk>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Bluecherry Maintainers <maintainers@bluecherrydvr.com>
Cc: Anton Sviridenko <anton@corp.bluecherry.net>
Cc: Andrey Utkin <andrey_utkin@fastmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Link: https://lore.kernel.org/r/20230815190136.8987-18-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the xen frontend driver code to use the new
unified PCM copy callback. It's a straightforward conversion from
*_user() to *_iter() variants.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: xen-devel@lists.xenproject.org
Link: https://lore.kernel.org/r/20230815190136.8987-16-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the sh_dac_audio driver code to use the new
unified PCM copy callback. It's a straightforward conversion from
*_user() to *_iter() variants.
Link: https://lore.kernel.org/r/20230815190136.8987-15-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the rme9652 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the hdsp driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the rme96 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Link: https://lore.kernel.org/r/20230815190136.8987-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the rme32 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Link: https://lore.kernel.org/r/20230815190136.8987-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the nm256 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Link: https://lore.kernel.org/r/20230815190136.8987-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the korg1212 driver code to use the new unified
PCM copy callback. The open-coded conditional memory copies are
replaced with simpler copy_from/to_iter() calls.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the es1938 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants in most parts.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the SB Emu8000 driver code to use the new unified
PCM copy callback. The conversion is a bit complicated because of
many open code in emu8000_pcm.c. GET_VAL() and LOOP_WRITE() macros
were rewritten / simplified with copy_from_iter(). As
copy_from_iter() updates the internal offset value, we can drop the
corresponding part, too.
Link: https://lore.kernel.org/r/20230815190136.8987-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the GUS driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the dummy driver code to use the new unified PCM
copy callback. As dummy driver doesn't do anything in the callback,
it's just a simple replacement.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230815190136.8987-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add two more helpers for copying memory between iov_iter and iomem,
which will be used by the new PCM copy ops in a few drivers.
The existing helpers became wrappers of those now.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
iov_iter is a universal interface to copy the data chunk from/to
user-space and kernel in a unified manner. This API can fit for ALSA
PCM copy ops, too; we had to split to copy_user and copy_kernel in the
past, and those can be unified to a single ops with iov_iter.
This patch adds a new PCM copy ops that passes iov_iter for copying
both kernel and user-space in the same way. This patch touches only
the ALSA PCM core part, and the actual users will be replaced in the
following patches.
The expansion of iov_iter is done in the PCM core right before calling
each copy callback. It's a bit suboptimal, but I took this now as
it's the most straightforward replacement. The more conversion to
iov_iter in the caller side is a TODO for future.
As of now, the old copy_user and copy_kernel ops are still kept.
Once after all users are converted, we'll drop the old copy_user and
copy_kernel ops, too.
Link: https://lore.kernel.org/r/20230815190136.8987-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Create tas2781 side codec HDA driver for Lenovo Laptops. The quantity
of the speakers has been define in ACPI. All of the tas2781s in the
laptop will be aggregated as one audio speaker. The code supports
realtek codec as the primary codec. Code offers several controls for
digtial/analog gain setting during playback, and other for eq params
setting in case of different audio profiles, such as music, voice,
movie, etc.
[ adjusted patch to be applied to the latest for-next branch -- tiwai ]
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20230818085836.1442-2-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Integrate tas2781 configs for Lenovo Laptops. All of the tas2781s in the
laptop will be aggregated as one audio device. The code support realtek
as the primary codec. Rename "struct cs35l41_dev_name" to
"struct scodec_dev_name" for all other side codecs instead of the certain
one.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20230818085836.1442-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since pcmtest is a test module that manipulates or gets
notification via debugfs, without DEBUG_FS it can not work fine.
So make SND_PCMTEST depend on DEBUG_FS.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230817093740.1732738-1-ruanjinjie@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
