* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP: rx51: fix USB
ARM: OMAP: mcbsp: Fix possible memory corruption
arm/imx: fix power button on imx51 babbage board
ARM: imx: fix cpufreq build errors
ARM: mx5: add __initconst for fec pdata
MXC PWM: should active during DOZE/WAIT/DBG mode
ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS
ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleep
ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210
ARM: SAMSUNG: remove duplicated header include
Tests show that the original large intervals can easily make the dirty
limit exceeded on 100 concurrent dd's. So adapt to as large as the
next check point selected by the dirty throttling algorithm.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Some active adaptors (VGA usually) only have two lanes at 2.7GHz.
That's a maximum pixel clock of 144MHz at 8bpc, but 192MHz at 6bpc.
Fixes Asus UX31 panel being black at startup due to no valid modes since
dc22ee6fc1.
v2: Rebased to current code, resulting in the fix applying to EDP panels as
well. Also changed from spatio-temporal to just spatial dithering on
pre-ironlake, to be conssitent (and less visual flicker)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Tested-by: Eric Anholt <eric@anholt.net>
Tested-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This adds a default setting for semaphores parameter, and enables
semaphores by default on IVB.
For now, as semaphores interaction with VTd causes random issues on
SNB, we do not enable them by default. But they can still be enabled
via the semaphores=1 kernel parameter.
v2: enables semaphores on SNB when IO remapping is disabled, with base
on Keith Packard patch.
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
CC: Ben Widawsky <ben@bwidawsk.net>
CC: Keith Packard <keithp@keithp.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42696
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40564
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38862
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This fixes a race where we may try to finish a page flip and decrement
the refcount even if our vblank_get failed and we ended up with a
spurious flip pending interrupt.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=34211.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
RC6 should always work on IVB, and should work on SNB whenever IO
remapping is disabled. RC6 never works on Ironlake. Make the default
value for the parameter follow these guidelines. Setting the value
to either 0 or 1 will force the specified behavior.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38567
Cc: Ted Phelps <phelps@gnusto.com>
Cc: Peter <pab1612@gmail.com>
Cc: Lukas Hejtmanek <xhejtman@fi.muni.cz>
Cc: Andrew Lutomirski <luto@mit.edu>
In i915 driver, we do not enable either rc6 or semaphores on SNB when dmar
is enabled. The new 'intel_iommu_enabled' variable signals when the
iommu code is in operation.
Cc: Ted Phelps <phelps@gnusto.com>
Cc: Peter <pab1612@gmail.com>
Cc: Lukas Hejtmanek <xhejtman@fi.muni.cz>
Cc: Andrew Lutomirski <luto@mit.edu>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We were checking whether the supplied edid matched the connector it was
read from. We do this in case a DDC read returns an EDID for another
device on a multifunction or otherwise interesting card. However, we
failed to include LVDS as a digital device and so rejecting an otherwise
valid EDID.
Fixes the detection of the secondary SDVO LVDS panel on the Libretto
W105.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39216
Signed-off-by: Keith Packard <keithp@keithp.com>
This prevents an in-kernel division by zero which happens when we are
asking for i915_chipset_val too quickly, or within a race condition
between the power monitoring thread and userspace accesses via debugfs.
The issue can be reproduced easily via the following command:
while ``; do cat /sys/kernel/debug/dri/0/i915_emon_status; done
This is particularly dangerous because it can be triggered by
a non-privileged user by just reading the debugfs entry.
This issue was also found independently by Konstantin Belousov
<kostikbel@gmail.com>, who proposed a similar patch.
Reported-by: Konstantin Belousov <kostikbel@gmail.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
v2: add a CPT-specific macro, make code cleaner
v3: fix commit message
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41272
Cc: stable@kernel.org
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8712u: Add new USB ID
staging: tidspbridge: request dmtimer clocks on init
staging: tidspbridge: include module.h by default
The bisection implemented in unwind_find_origin() stopped to early. If
there is only a single entry left to check the original code just took
the end point as origin which might be wrong.
This was introduced in commit de66a97901 ("ARM: 7187/1: fix unwinding
for XIP kernels").
Reported-and-tested-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The btrfs io submission threads can build up massive plug lists. This
keeps things more reasonable so we don't hand over huge dumps of IO at
once.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
While probing, fd sets up queue, probes hardware and tears down the
queue if probing fails. In the process, blk_drain_queue() kicks the
queue which failed to finish initialization and fd is unhappy about
that.
floppy0: no floppy controllers found
------------[ cut here ]------------
WARNING: at drivers/block/floppy.c:2929 do_fd_request+0xbf/0xd0()
Hardware name: To Be Filled By O.E.M.
VFS: do_fd_request called on non-open device
Modules linked in:
Pid: 1, comm: swapper Not tainted 3.2.0-rc4-00077-g5983fe2 #2
Call Trace:
[<ffffffff81039a6a>] warn_slowpath_common+0x7a/0xb0
[<ffffffff81039b41>] warn_slowpath_fmt+0x41/0x50
[<ffffffff813d657f>] do_fd_request+0xbf/0xd0
[<ffffffff81322b95>] blk_drain_queue+0x65/0x80
[<ffffffff81322c93>] blk_cleanup_queue+0xe3/0x1a0
[<ffffffff818a809d>] floppy_init+0xdeb/0xe28
[<ffffffff818a72b2>] ? daring+0x6b/0x6b
[<ffffffff810002af>] do_one_initcall+0x3f/0x170
[<ffffffff81884b34>] kernel_init+0x9d/0x11e
[<ffffffff810317c2>] ? schedule_tail+0x22/0xa0
[<ffffffff815dbb14>] kernel_thread_helper+0x4/0x10
[<ffffffff81884a97>] ? start_kernel+0x2be/0x2be
[<ffffffff815dbb10>] ? gs_change+0xb/0xb
Avoid it by making blk_drain_queue() kick queue iff dispatch queue has
something on it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ralf Hildebrandt <Ralf.Hildebrandt@charite.de>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Tested-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* 'stable/for-linus-fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/swiotlb: Use page alignment for early buffer allocation.
xen: only limit memory map to maximum reservation for domain 0.
This patch is functionally tested on Samsung SMDKV6410.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
[grant.likely: don't create an unnecessary header file]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This fixes an odd bug found on a Dell PowerEdge 1850/0RC130
(BIOS A05 01/09/2006) where all of the modules doing pci_set_dma_mask
would fail with:
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
ata_piix 0000:00:1f.1: BMDMA: failed to set dma mask, falling back to PIO
The issue was the Xen-SWIOTLB was allocated such as that the end of
buffer was stradling a page (and also above 4GB). The fix was
spotted by Kalev Leonid which was to piggyback on git commit
e79f86b2ef "swiotlb: Use page alignment
for early buffer allocation" which:
We could call free_bootmem_late() if swiotlb is not used, and
it will shrink to page alignment.
So alloc them with page alignment at first, to avoid lose two pages
And doing that fixes the outstanding issue.
CC: stable@kernel.org
Suggested-by: "Kalev, Leonid" <Leonid.Kalev@ca.com>
Reported-and-Tested-by: "Taylor, Neal E" <Neal.Taylor@ca.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
d312ae878b "xen: use maximum reservation to limit amount of usable RAM"
clamped the total amount of RAM to the current maximum reservation. This is
correct for dom0 but is not correct for guest domains. In order to boot a guest
"pre-ballooned" (e.g. with memory=1G but maxmem=2G) in order to allow for
future memory expansion the guest must derive max_pfn from the e820 provided by
the toolstack and not the current maximum reservation (which can reflect only
the current maximum, not the guest lifetime max). The existing algorithm
already behaves this correctly if we do not artificially limit the maximum
number of pages for the guest case.
For a guest booted with maxmem=512, memory=128 this results in:
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
-[ 0.000000] Xen: 0000000000100000 - 0000000008100000 (usable)
-[ 0.000000] Xen: 0000000008100000 - 0000000020800000 (unusable)
+[ 0.000000] Xen: 0000000000100000 - 0000000020800000 (usable)
...
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
-[ 0.000000] last_pfn = 0x8100 max_arch_pfn = 0x1000000
+[ 0.000000] last_pfn = 0x20800 max_arch_pfn = 0x1000000
[ 0.000000] initial memory mapped : 0 - 027ff000
[ 0.000000] Base memory trampoline at [c009f000] 9f000 size 4096
-[ 0.000000] init_memory_mapping: 0000000000000000-0000000008100000
-[ 0.000000] 0000000000 - 0008100000 page 4k
-[ 0.000000] kernel direct mapping tables up to 8100000 @ 27bb000-27ff000
+[ 0.000000] init_memory_mapping: 0000000000000000-0000000020800000
+[ 0.000000] 0000000000 - 0020800000 page 4k
+[ 0.000000] kernel direct mapping tables up to 20800000 @ 26f8000-27ff000
[ 0.000000] xen: setting RW the range 27e8000 - 27ff000
[ 0.000000] 0MB HIGHMEM available.
-[ 0.000000] 129MB LOWMEM available.
-[ 0.000000] mapped low ram: 0 - 08100000
-[ 0.000000] low ram: 0 - 08100000
+[ 0.000000] 520MB LOWMEM available.
+[ 0.000000] mapped low ram: 0 - 20800000
+[ 0.000000] low ram: 0 - 20800000
With this change "xl mem-set <domain> 512M" will successfully increase the
guest RAM (by reducing the balloon).
There is no change for dom0.
Reported-and-Tested-by: George Shuklin <george.shuklin@gmail.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: stable@kernel.org
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
A user reported a problem booting into a new kernel with the old format inodes.
He was panicing in cow_file_range while writing out the inode cache. This is
because if the block group is not cached we'll just skip writing out the cache,
however if it gets dirtied again in the same transaction and it finished caching
we'd go ahead and write it out, but since we set cache_generation to the transid
we think we've already truncated it and will just carry on, running into
cow_file_range and blowing up. We need to make sure we only set
cache_generation if we've done the truncate. The user tested this patch and
verified that the panic no longer occured. Thanks,
Reported-and-Tested-by: Klaus Bitto <klaus.bitto@gmail.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
I've been hitting this BUG_ON() in btrfs_orphan_add when running xfstest 269 in
a loop. This is because we will add an orphan item, do the truncate, the
truncate will fail for whatever reason (*cough*ENOSPC*cough*) and then we're
left with an orphan item still in the fs. Then we come back later to do another
truncate and it blows up because we already have an orphan item. This is ok so
just fix the BUG_ON() to only BUG() if ret is not EEXIST. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We were occasionaly leaking space when running xfstest 269. This is because if
we failed to start the transaction in the truncate loop we'd just goto out, but
we need to break so that the inode is removed from the orphan list and the space
is properly freed. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Running xfstests 269 with some tracing my scripts kept spitting out errors about
releasing bytes that we didn't actually have reserved. This took me down a huge
rabbit hole and it turns out the way we deal with reserved_extents is wrong,
we need to only be setting it if the reservation succeeds, otherwise the free()
method will come in and unreserve space that isn't actually reserved yet, which
can lead to other warnings and such. The math was all working out right in the
end, but it caused all sorts of other issues in addition to making my scripts
yell and scream and generally make it impossible for me to track down the
original issue I was looking for. The other problem is with our error handling
in the reservation code. There are two cases that we need to deal with
1) We raced with free. In this case free won't free anything because csum_bytes
is modified before we dro the lock in our reservation path, so free rightly
doesn't release any space because the reservation code may be depending on that
reservation. However if we fail, we need the reservation side to do the free at
that point since that space is no longer in use. So as it stands the code was
doing this fine and it worked out, except in case #2
2) We don't race with free. Nobody comes in and changes anything, and our
reservation fails. In this case we didn't reserve anything anyway and we just
need to clean up csum_bytes but not free anything. So we keep track of
csum_bytes before we drop the lock and if it hasn't changed we know we can just
decrement csum_bytes and carry on.
Because of the case where we can race with free()'s since we have to drop our
spin_lock to do the reservation, I'm going to serialize all reservations with
the i_mutex. We already get this for free in the heavy use paths, truncate and
file write all hold the i_mutex, just needed to add it to page_mkwrite and
various ioctl/balance things. With this patch my space leak scripts no longer
scream bloody murder. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Now that we're properly keeping track of delayed inode space we've been getting
a lot of warnings out of btrfs_dirty_inode() when running xfstest 83. This is
because a bunch of people call mark_inode_dirty, which is void so we can't
return ENOSPC. This needs to be fixed in a few areas
1) file_update_time - this updates the mtime and such when writing to a file,
which will call mark_inode_dirty. So copy file_update_time into btrfs so we can
call btrfs_dirty_inode directly and return an error if we get one appropriately.
2) fix symlinks to use btrfs_setattr for ->setattr. For some reason we weren't
setting ->setattr for symlinks, even though we should have been. This catches
one of the cases where we were getting errors in mark_inode_dirty.
3) Fix btrfs_setattr and btrfs_setsize to call btrfs_dirty_inode directly
instead of mark_inode_dirty. This lets us return errors properly for truncate
and chown/anything related to setattr.
4) Add a new btrfs_fs_dirty_inode which will just call btrfs_dirty_inode and
print an error if we have one. The only remaining user we can't control for
this is touch_atime(), but we don't really want to keep people from walking
down the tree if we don't have space to save the atime update, so just complain
but don't worry about it.
With this patch xfstests 83 complains a handful of times instead of hundreds of
times. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Al pointed out we have some random problems with the way we account for
num_workers_starting in the async thread stuff. First of all we need to make
sure to decrement num_workers_starting if we fail to start the worker, so make
__btrfs_start_workers do this. Also fix __btrfs_start_workers so that it
doesn't call btrfs_stop_workers(), there is no point in stopping everybody if we
failed to create a worker. Also check_pending_worker_creates needs to call
__btrfs_start_work in it's work function since it already increments
num_workers_starting.
People only start one worker at a time, so get rid of the num_workers argument
everywhere, and make btrfs_queue_worker a void since it will always succeed.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
The Smack LSM hook for security_d_instantiate checks
the inode's i_op->getxattr value to determine if the
containing filesystem supports extended attributes.
The BTRFS filesystem sets the inode's i_op value only
after it has instantiated the inode. This results in
Smack incorrectly giving new BTRFS inodes attributes
from the filesystem defaults on the assumption that
values can't be stored on the filesystem. This patch
moves the assignment of inode operation vectors ahead
of the calls to d_instantiate, letting Smack know that
the filesystem supports extended attributes. There
should be no impact on the performance or behavior of
BTRFS.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If we have a constant stream of end_io completions or crc work,
we can hit softlockup messages from the async helper threads. This
adds a cond_resched() into the loop to avoid them.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Since we have the free space caches, btrfs_orphan_cleanup also runs for
the tree_root. Unfortunately this also cleans up the orphans used to mark
subvol deletions in progress.
Currently if a subvol deletion gets interrupted twice by umount/mount, the
deletion will not be continued and the space permanently lost, though it
would be possible to write a tool to recover those lost subvol deletions.
This patch checks if the orphan belongs to a subvol (dead root) and skips
the deletion.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When we use raid0 as the data profile, df command may show us a very
inaccurate value of the available space, which may be much less than the
real one. It may make the users puzzled. Fix it by changing the calculation
of the available space, and making it be more similar to a fake chunk
allocation.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfsck report errors after the 83th case of xfstests was run, The error
number is 400, it means the used disk space of the file is wrong.
The reason of this bug is that:
The file truncation may fail when the space of the file system is not enough,
and leave some file extents, whose offset are beyond the end of the files.
When we want to expand those files, we will drop those file extents, and
put in dummy file extents, and then we should update the i-node. But btrfs
forgets to do it.
This patch adds the forgotten i-node update.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfsck report error 100 after the 83th case of xfstests was run, it means
the i_size of the file is wrong.
The reason of this bug is that:
Btrfs increased i_size of the file at the beginning, but it failed to expand
the file, and failed to update the i_size to the old size because there is no
enough space in the file system, so we found a wrong i_size.
This patch fixes this bug by updating the i_size just when we pass the file
expanding and get enough space to update i-node.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Several people with this chipset have reported inconsistent/sloppy
values for position reporting when the DMA position buffer is used,
and that setting position_fix=1 have fixed their problems.
BugLink: https://bugs.launchpad.net/bugs/825709
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=n3Lm
-----END PGP SIGNATURE-----
Merge tag 'tytso-for-linus-20111214' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* tag 'tytso-for-linus-20111214' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: handle EOF correctly in ext4_bio_write_page()
ext4: remove a wrong BUG_ON in ext4_ext_convert_to_initialized
ext4: correctly handle pages w/o buffers in ext4_discard_partial_buffers()
ext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize
ext4: avoid hangs in ext4_da_should_update_i_disksize()
ext4: display the correct mount option in /proc/mounts for [no]init_itable
ext4: Fix crash due to getting bogus eh_depth value on big-endian systems
ext4: fix ext4_end_io_dio() racing against fsync()
.. using the new signed tag merge of git that now verifies the gpg
signature automatically. Yay. The branchname was just 'dev', which is
prettier. I'll tell Ted to use nicer tag names for future cases.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/ncpfs: fix error paths and goto statements in ncp_fill_super()
configfs: register_filesystem() called too early
fuse: register_filesystem() called too early
ubifs: too early register_filesystem()
... and the same kind of leak for mqueue
procfs: fix a vfsmount longterm reference leak
The "(insn & 0x01800000) != 0x01800000" test matches 'restore'
but that is a legitimate place to see the %lo() part of a 32-bit
symbol relocation, particularly in tail calls.
Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Sergei Trofimovich <slyfox@gentoo.org>
The label 'out_bdi' should be followed by bdi_destroy() instead of
fput() which should be after the 'out_fput' label.
If bdi_setup_and_register() fails then jump to the 'out_fput' label
instead of the 'out_bdi' one.
If fget(data.info_fd) fails then jump to the previously fixed 'out_bdi'
label to call bdi_destroy() otherwise the bdi object will not be
destroyed.
Compile tested only.
Signed-off-by: Djalal Harouni <tixxdz@opendz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We need to zero out part of a page which beyond EOF before setting uptodate,
otherwise, mapread or write will see non-zero data beyond EOF.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
