- Tracepoints for clk_rate_request structures
* clk-mediatek:
clk: mediatek: fix dependency of MT7986 ADC clocks
clk: mediatek: Change PLL register API for MT8186
clk: mediatek: Add new clock driver to handle FHCTL hardware
dt-bindings: clock: mediatek: Add new bindings of MediaTek frequency hopping
clk: mediatek: Export PLL operations symbols
clk: mediatek: mt8186-topckgen: Add GPU clock mux notifier
clk: mediatek: mt8186-mfg: Propagate rate changes to parent
clk: mediatek: mt8195-topckgen: Drop flags for main/univpll fixed factors
clk: mediatek: mt8192: Drop flags for main/univpll fixed factors
clk: mediatek: mt6795-topckgen: Drop flags for main/sys/univpll fixed factors
clk: mediatek: mt8173: Drop flags for main/sys/univpll fixed factors
clk: mediatek: mt8183: Drop flags for sys/univpll fixed factors
clk: mediatek: mt8183: Compress top_divs array entries
clk: mediatek: mt8186-topckgen: Drop flags for main/univpll fixed factors
clk: mediatek: clk-mtk: Allow specifying flags on mtk_fixed_factor clocks
* clk-trace:
clk: Add trace events for rate requests
clk: Store clk_core for clk_rate_request
* clk-qcom: (69 commits)
clk: qcom: rpmh: add support for SM6350 rpmh IPA clock
clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: mmcc-msm8974: move clock parent tables down
clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: gcc-msm8974: move clock parent tables down
clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974
dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file
clk: qcom: gcc-ipq4019: switch to devm_clk_notifier_register
clk: qcom: rpmh: remove usage of platform name
clk: qcom: rpmh: rename VRM clock data
clk: qcom: rpmh: rename ARC clock data
clk: qcom: rpmh: support separate symbol name for the RPMH clocks
clk: qcom: rpmh: remove platform names from BCM clocks
clk: qcom: rpmh: drop all _ao names
clk: qcom: rpmh: reuse common duplicate clocks
clk: qcom: rpmh: group clock definitions together
clk: qcom: rpm: drop the platform from clock definitions
clk: qcom: rpm: drop the _clk suffix completely
...
* clk-microchip:
clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE
clk: microchip: check for null return of devm_kzalloc()
The IPA core clock is required for SM6350. Define it.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
[elder@linaro.org: rebased with Dmitry's changes]
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202221240.225720-1-elder@linaro.org
Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names. Use parent_hws where possible to refer parent
clocks directly, skipping the lookup.
Note, the system names for xo clocks were changed from "xo" to
"xo_board" to follow the example of other platforms. This switches the
clocks to use DT-provided "xo_board" clock instead of manually
registered "xo" clock and allows us to drop qcom_cc_register_board_clk()
call from the driver at some point.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-9-dmitry.baryshkov@linaro.org
Move clock parent tables down, after the PLL declarataions, so that we
can use pll hw clock fields in the next commit.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-8-dmitry.baryshkov@linaro.org
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-7-dmitry.baryshkov@linaro.org
Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names. Use parent_hws where possible to refer parent
clocks directly, skipping the lookup.
Note, the system names for xo clocks were changed from "xo" to
"xo_board" to follow the example of other platforms. This switches the
clocks to use DT-provided "xo_board" clock instead of manually
registered "xo" clock and allows us to drop qcom_cc_register_board_clk()
call from the driver at some point.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-6-dmitry.baryshkov@linaro.org
Rearrage clock parent tables and PLL declarations (pull parents down
and gpll4 up), so that we can use pll hw clock fields in the next
commit.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-5-dmitry.baryshkov@linaro.org
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-4-dmitry.baryshkov@linaro.org
Switch to using devres-managed version of clk_notifier_register(). This
allows us to drop driver's remove() callback.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221205113545.575702-1-robert.marko@sartura.hr
Now that all clocks have individual names, remove the names of SoCs from
the RPMH clock definitions. Replace it with the common clk_rpmh_ prefix.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-9-dmitry.baryshkov@linaro.org
RPMH VRM clocks are frequently shared between several platforms. It
makes little sense to encode the SoC name into the clock name, if the
same clock is used for other SoCs.
Rework the VRM clock definitions to add resource-specific suffix. Keep
the userspace-visible clock name, but encode the part of cmd resource
and the divider into the variable name. This also make it obvious which
variant is used, making the code less error-prone.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-8-dmitry.baryshkov@linaro.org
RPMH ARC clocks are frequently shared between several platforms. It
makes little sense to encode the SoC name into the clock name, if the
same clock is used for other SoCs.
Rework the ARC clock definitions to remove the SoC name. Keep the
userspace-visible clock name, but encode the divider into the variable
name. This also makes it obvious which divider is used by the platform,
making the code less error-prone.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-7-dmitry.baryshkov@linaro.org
Both ARC and VRM clocks have minor differences between platforms.
However using SoC names directly results in duplication, confusion and
occasional errors. Next patches are going to drop the SoC names and
encode these differences into the clock names.
To keep the system clock names (visible to userspace) intact, add
separate symbol names that are used in the code.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-6-dmitry.baryshkov@linaro.org
There are no platform-specific parts in the BCM clocks, drop the
platform name from the clock definitions, replacing it with clk_rpmh to
have the common prefix.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-5-dmitry.baryshkov@linaro.org
In preparation for the further cleanup, remove the active only names,
they can be easily generated from the standard ones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-4-dmitry.baryshkov@linaro.org
After the grouping it is obvious that some of the clock definitions are
pure duplicates. Rename them to use a single common name for the clock.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-3-dmitry.baryshkov@linaro.org
In preparations to the further changes, group all RPMH clock definitions
to ease review. Group the clocks by their type to make similar/duplicate
clocks stand out.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202185843.721673-2-dmitry.baryshkov@linaro.org
A single clock definition can be used on different platforms. Thus the
platform part of the clock name is not correct (and can be misleading).
Remove the platform-specific part of the defined clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202070814.482470-5-dmitry.baryshkov@linaro.org
Drop the _clk suffix from other clocks too. This does not produce any
user-visible changes, just syntax sugar.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202070814.482470-4-dmitry.baryshkov@linaro.org
To simplify code reviews remove duplication between normal and
active-only clock names. Get a single clock name and generate both names
internally.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202070814.482470-3-dmitry.baryshkov@linaro.org
The RPM_FIXED and RPM_XO_BUFFER clocks do not have the active-only
counterparts. Drop corresponding unused arguments.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202070814.482470-2-dmitry.baryshkov@linaro.org
Add Global Clock controller (GCC) driver for SM8550 SoC,
which includes the gcc resets and gdsc.
This patch is based on an initial downstream driver.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130112852.2977816-6-abel.vesa@linaro.org
Add a LUCID_OLE PLL type for SM8550 SoC from Qualcomm.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130112852.2977816-5-abel.vesa@linaro.org
The SM8550 GCC GDSCs need a higher timeout value when polling for status,
so increase it to 1500us, while leaving the delay between disable-enable
sequence for votable gdscs to stay the same.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130112852.2977816-4-abel.vesa@linaro.org
Similar to msm8916, msm8939 has (at least) 6 "General Purpose" clocks that
can be muxed to SoC pins. These clocks are:
GP_CLK{0, 1} : GPIO_{31, 32} (Belongs to CAMSS according to Linux)
GP_CLK_{1-3}{A, B} : GPIO_{49-51, 97, 12, 13} (Belongs to GCC itself)
GP_MN : GPIO_110 (Doesn't seem to be described in gcc,
ignored in this patch)
Those clocks may be used as e.g. PWM sources for external peripherals.
Add more frequencies to the table for those clocks so it's possible
for arbitrary peripherals to make use of them.
Reference: https://lore.kernel.org/r/20220612145955.385787-5-nikita@trvn.ru
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117171343.24216-1-linmengbo0689@protonmail.com
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/202211171403340042731@zte.com.cn
It appears that having only .name populated in parent_data for clocks
which are only globally searchable currently will not work as the clk core
won't copy that name if there is no .fw_name present as well.
So, populate .fw_name for all parent clocks in parent_data.
Fixes: ae55ad32e2 ("clk: qcom: ipq8074: convert to parent data")
Co-developed-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116214655.1116467-1-robimarko@gmail.com
Modernize the krait-cc driver to parent-data API and refactor to drop
any use of parent_names. From Documentation all the required clocks should
be declared in DTS so fw_name can be correctly used to get the parents
for all the muxes. .name is also declared to save compatibility with old
DT.
While at it also drop some hardcoded index and introduce an enum to make
index values more clear.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221109005631.3189-5-ansuelsmth@gmail.com
Some bootloader may leave the system in an even more undefined state
with the secondary mux of L2 or other cores sourcing out of the acpu_aux
parent. This results in the clk set to the PXO rate or a PLL8 rate.
The current logic to reset the mux and set them to a defined state only
handle if the mux are configured to source out of QSB. Change this and
force a new and defined state if the current clk is lower than the aux
rate. This way we can handle any wrong configuration where the mux is
sourcing out of QSB (rate 225MHz, currently set to a virtual rate of 1),
PXO rate (rate 25MHz) or PLL8 (needs to be configured to run at 384Mhz).
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221109005631.3189-3-ansuelsmth@gmail.com
clk-krait ignore any rate change if clk is not flagged as enabled.
Correctly enable the secondary mux and div clk to correctly change rate
instead of silently ignoring the request.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221109005631.3189-2-ansuelsmth@gmail.com
The secondary mux parent order is swapped.
This currently doesn't cause problems as the secondary mux is used for idle
clk and as a safe clk source while reprogramming the hfpll.
Each mux have 2 or more output but he always have a safe source to
switch while reprogramming the connected pll. We use a clk notifier to
switch to the correct parent before clk core can apply the correct rate.
The parent to switch is hardcoded in the mux struct.
For the secondary mux the safe source to use is the qsb parent as it's
the only fixed clk as the acpus_aux is a pll that can source from pxo or
from pll8.
The hardcoded safe parent for the secondary mux is set to index 0 that
in the secondary mux map is set to 2.
But the index 0 is actually acpu_aux in the parent list.
Fix the swapped parents to correctly handle idle frequency and output a
sane clk_summary report.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221109005631.3189-1-ansuelsmth@gmail.com
Use devm variant for clk notifier register and correctly handle free
resource on driver remove.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221108215827.30475-1-ansuelsmth@gmail.com
Currently div2 value is applied to the wrong bits. This is caused by a
bug in the code where the shift is done only for lpl, for anything
else the mask is not shifted to the correct bits.
Fix this by correctly shift if lpl is not supported.
Fixes: 4d7dc77bab ("clk: qcom: Add support for Krait clocks")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221108215625.30186-1-ansuelsmth@gmail.com
krait-cc use this driver for the secondary mux. Register it as a clk
provider to correctly use this clk in other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221108211734.3707-1-ansuelsmth@gmail.com
Downstream QCA 5.4 kernel defines networking resets which are not present
in the mainline kernel but are required for the networking drivers.
So, port the downstream resets and avoid using magic values for mask,
construct mask for resets which require multiple bits to be set/cleared.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107132901.489240-3-robimarko@gmail.com
This patch adds the support for giving the complete bitmask
in reset structure and reset operation will use this bitmask
for all reset operations.
Currently, reset structure only takes a single bit for each reset
and then calculates the bitmask by using the BIT() macro.
However, this is not sufficient anymore for newer SoC-s like IPQ8074,
IPQ6018 and more, since their networking resets require multiple bits
to be asserted in order to properly reset the HW block completely.
So, in order to allow asserting multiple bits add "bitmask" field to
qcom_reset_map, and then use that bitmask value if its populated in the
driver, if its not populated, then we just default to existing behaviour
and calculate the bitmask on the fly.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107132901.489240-1-robimarko@gmail.com
The two devices managed by lpasscorecc-sc7180.c each had their own
"struct dev_pm_ops". This is not needed. They are exactly the same and
the structure is "static const" so it can't possible change. combine
the two. This matches what's done for sc7280.
This should be a noop other than saving a few bytes.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104064055.3.I90ba14a47683a484f26531a08f7b46ace7f0a8a9@changeid
The sc7180 lpass clock controller's pm_runtime usage wasn't broken
quite as spectacularly as the sc7280's pm_runtime usage, but it was
still broken. Putting some printouts in at boot showed me this (with
serial console enabled, which makes the prints slow and thus changes
timing):
[ 3.109951] DOUG: my_pm_clk_resume, usage=1
[ 3.114767] DOUG: my_pm_clk_resume, usage=1
[ 3.664443] DOUG: my_pm_clk_suspend, usage=0
[ 3.897566] DOUG: my_pm_clk_suspend, usage=0
[ 3.910137] DOUG: my_pm_clk_resume, usage=1
[ 3.923217] DOUG: my_pm_clk_resume, usage=0
[ 4.440116] DOUG: my_pm_clk_suspend, usage=-1
[ 4.444982] DOUG: my_pm_clk_suspend, usage=0
[ 14.170501] DOUG: my_pm_clk_resume, usage=1
[ 14.176245] DOUG: my_pm_clk_resume, usage=0
...or this w/out serial console:
[ 0.556139] DOUG: my_pm_clk_resume, usage=1
[ 0.556279] DOUG: my_pm_clk_resume, usage=1
[ 1.058422] DOUG: my_pm_clk_suspend, usage=-1
[ 1.058464] DOUG: my_pm_clk_suspend, usage=0
[ 1.186250] DOUG: my_pm_clk_resume, usage=1
[ 1.186292] DOUG: my_pm_clk_resume, usage=0
[ 1.731536] DOUG: my_pm_clk_suspend, usage=-1
[ 1.731557] DOUG: my_pm_clk_suspend, usage=0
[ 10.288910] DOUG: my_pm_clk_resume, usage=1
[ 10.289496] DOUG: my_pm_clk_resume, usage=0
It seems to be doing roughly the right sequence of calls, but just
like with sc7280 this is more by luck than anything. Having a usage of
-1 is just not OK.
Let's fix this like we did with sc7280.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Fixes: ce8c195e65 ("clk: qcom: lpasscc: Introduce pm autosuspend for SC7180")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104064055.2.I49b25b9bda9430fc7ea21e5a708ca5a0aced2798@changeid
The pm_runtime usage in lpass-sc7280 was broken in quite a few
ways. Specifically:
1. At the end of probe it called "put" twice. This is a no-no and will
end us up with a negative usage count. Even worse than calling
"put" twice, it never called "get" once. Thus after bootup it could
be seen that the runtime usage of the devices managed by this
driver was -2.
2. In some error cases it manually called pm_runtime_disable() even
though it had previously used devm_add_action_or_reset() to set
this up to be called automatically. This meant that in these error
cases we'd double-call pm_runtime_disable().
3. It forgot to call undo pm_runtime_use_autosuspend(), which can
sometimes have subtle problems (and the docs specifically mention
that you need to undo this function).
Overall the above seriously calls into question how this driver is
working. It seems like a combination of "it doesn't", "by luck", and
"because of the weirdness of runtime_pm". Specifically I put a
printout to the serial console every time the runtime suspend/resume
was called for the two devices created by this driver (I wrapped the
pm_clk calls). When I had serial console enabled, I found that the
calls got resumed at bootup (when the clk core probed and before our
double-put) and then never touched again. That's no good.
[ 0.829997] DOUG: my_pm_clk_resume, usage=1
[ 0.835487] DOUG: my_pm_clk_resume, usage=1
When I disabled serial console (speeding up boot), I got a different
pattern, which I guess (?) is better:
[ 0.089767] DOUG: my_pm_clk_resume, usage=1
[ 0.090507] DOUG: my_pm_clk_resume, usage=1
[ 0.151885] DOUG: my_pm_clk_suspend, usage=-2
[ 0.151914] DOUG: my_pm_clk_suspend, usage=-2
[ 1.825747] DOUG: my_pm_clk_resume, usage=-1
[ 1.825774] DOUG: my_pm_clk_resume, usage=-1
[ 1.888269] DOUG: my_pm_clk_suspend, usage=-2
[ 1.888282] DOUG: my_pm_clk_suspend, usage=-2
These different patterns have to do with the fact that the core PM
Runtime code really isn't designed to be robust to negative usage
counts and sometimes may happen to stumble upon a behavior that
happens to "work". For instance, you can see that
__pm_runtime_suspend() will treat any non-zero value (including
negative numbers) as if the device is in use.
In any case, let's fix the driver to be correct. We'll hold a
pm_runtime reference for the whole probe and then drop it (once!) at
the end. We'll get rid of manual pm_runtime_disable() calls in the
error handling. We'll also switch to devm_pm_runtime_enable(), which
magically handles undoing pm_runtime_use_autosuspend() as of commit
b4060db925 ("PM: runtime: Have devm_pm_runtime_enable() handle
pm_runtime_dont_use_autosuspend()").
While we're at this, let's also use devm_pm_clk_create() instead of
rolling it ourselves.
Note that the above changes make it obvious that
lpassaudio_create_pm_clks() was doing more than just creating
clocks. It was also setting up pm_runtime parameters. Let's rename it.
All of these problems were found by code inspection. I started looking
at this driver because it was involved in a deadlock that I reported a
while ago [1]. Though I bisected the deadlock to commit 1b771839de
("clk: qcom: gdsc: enable optional power domain support"), it was
never really clear why that patch affected it other than a luck of
timing changes. I'll also note that by fixing the timing (as done in
this change) we also seem to aboid the deadlock, which is a nice
benefit.
Also note that some of the fixes here are much the same type of stuff
that Dmitry did in commit 72cfc73f46 ("clk: qcom: use
devm_pm_runtime_enable and devm_pm_clk_create"), but I guess
lpassaudiocc-sc7280.c didn't exist then.
[1] https://lore.kernel.org/r/20220922154354.2486595-1-dianders@chromium.org
Fixes: a9dd26639d ("clk: qcom: lpass: Add support for LPASS clock controller for SC7280")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104064055.1.I00a0e4564a25489e85328ec41636497775627564@changeid
The three UFS reference clocks, gcc_ufs_ref_clkref_clk for external
UFS devices, gcc_ufs_card_clkref_clk and gcc_ufs_1_card_clkref_clk for
two PHYs are all sourced from CXO.
Added parent_data for all three reference clocks described above to
reflect that all three clocks are sourced from CXO to have valid
frequency for the ref clock needed by UFS controller driver.
Fixes: d65d005f9a ("clk: qcom: add sc8280xp GCC driver")
Link: https://lore.kernel.org/lkml/Y2Tber39cHuOSR%2FW@hovoldconsulting.com/
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20221115152956.21677-1-quic_shazhuss@quicinc.com
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the display clock controller found on SM6375.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115155808.10899-2-konrad.dybcio@linaro.org
The Qualcomm SC8280XP platform has two display clock controller
instances, add support for these. Duplication between the two
implementations is reduced by reusing any constant data between the two
sets of clock data.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220926203800.16771-3-quic_bjorande@quicinc.com
Convert the IPQ8074 GCC driver to use parent data instead of global
name matching.
Utilize ARRAY_SIZE for num_parents instead of hardcoding the value.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221030175703.1103224-1-robimarko@gmail.com
SM8150 does not have any of the link_div_clk_src clocks, so
let's disable them for this SoC.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102090140.965450-6-robert.foss@linaro.org
SM8350 supports embedded displayport, but the clocks for this
were previously not accounted for.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102090140.965450-5-robert.foss@linaro.org
All SoC supported by this driver supports the RETAIN_FF_ENABLE flag,
so it should be enabled here.
This feature enables registers to maintain their state after
dis/re-enabling the GDSC.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102090140.965450-3-robert.foss@linaro.org
SM8350 does not have the EDP_GTC clock, so let's disable it
for this SoC.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102090140.965450-2-robert.foss@linaro.org
USB controllers on SM8250 doesn't work after coming back from suspend.
This can be fixed by keeping the USB GDSCs in retention mode so that
hardware can keep them ON and put into rentention mode once the parent
domain goes to a low power state.
Fixes: 3e5770921a ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102091320.66007-1-manivannan.sadhasivam@linaro.org
