in case of driver wants to sync part of ranges with offset,
swiotlb_tbl_sync_single() copies from orig_addr base to tlb_addr with
offset and ends up with data mismatch.
It was removed from
"swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single",
but said logic has to be added back in.
From Linus's email:
"That commit which the removed the offset calculation entirely, because the old
(unsigned long)tlb_addr & (IO_TLB_SIZE - 1)
was wrong, but instead of removing it, I think it should have just
fixed it to be
(tlb_addr - mem->start) & (IO_TLB_SIZE - 1);
instead. That way the slot offset always matches the slot index calculation."
(Unfortunatly that broke NVMe).
The use-case that drivers are hitting is as follow:
1. Get dma_addr_t from dma_map_single()
dma_addr_t tlb_addr = dma_map_single(dev, vaddr, vsize, DMA_TO_DEVICE);
|<---------------vsize------------->|
+-----------------------------------+
| | original buffer
+-----------------------------------+
vaddr
swiotlb_align_offset
|<----->|<---------------vsize------------->|
+-------+-----------------------------------+
| | | swiotlb buffer
+-------+-----------------------------------+
tlb_addr
2. Do something
3. Sync dma_addr_t through dma_sync_single_for_device(..)
dma_sync_single_for_device(dev, tlb_addr + offset, size, DMA_TO_DEVICE);
Error case.
Copy data to original buffer but it is from base addr (instead of
base addr + offset) in original buffer:
swiotlb_align_offset
|<----->|<- offset ->|<- size ->|
+-------+-----------------------------------+
| | |##########| | swiotlb buffer
+-------+-----------------------------------+
tlb_addr
|<- size ->|
+-----------------------------------+
|##########| | original buffer
+-----------------------------------+
vaddr
The fix is to copy the data to the original buffer and take into
account the offset, like so:
swiotlb_align_offset
|<----->|<- offset ->|<- size ->|
+-------+-----------------------------------+
| | |##########| | swiotlb buffer
+-------+-----------------------------------+
tlb_addr
|<- offset ->|<- size ->|
+-----------------------------------+
| |##########| | original buffer
+-----------------------------------+
vaddr
[One fix which was Linus's that made more sense to as it created a
symmetry would break NVMe. The reason for that is the:
unsigned int offset = (tlb_addr - mem->start) & (IO_TLB_SIZE - 1);
would come up with the proper offset, but it would lose the
alignment (which this patch contains).]
Fixes: 16fc3cef33 ("swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single")
Signed-off-by: Bumyong Lee <bumyong.lee@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: Dominique MARTINET <dominique.martinet@atmark-techno.com>
Reported-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Horia Geantă <horia.geanta@nxp.com>
CC: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
If the user already specified a swiotlb size on the command line,
swiotlb_adjust_size should not overwrite it.
Fixes: 2cbc2776ef ("swiotlb: remove swiotlb_nr_tbl")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Fix the type of index from unsigned int to int since find_slots() might
return -1.
Fixes: 26a7e09478 ("swiotlb: refactor swiotlb_tbl_map_single")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
When SWIOTLB_NO_FORCE is used, there should really be no allocations of
default_nslabs to occur since we are not going to use those slabs. If a
platform was somehow setting swiotlb_no_force and a later call to
swiotlb_init() was to be made we would still be proceeding with
allocating the default SWIOTLB size (64MB), whereas if swiotlb=noforce
was set on the kernel command line we would have only allocated 2KB.
This would be inconsistent and the point of initializing default_nslabs
to 1, was intended to allocate the minimum amount of memory possible, so
simply remove that minimal allocation period.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
All callers just use it to check if swiotlb is active at all, for which
they can just use is_swiotlb_active. In the longer run drivers need
to stop using is_swiotlb_active as well, but let's do the simple step
first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Instead of allocating ->list and ->orig_addr separately just do one
dynamic allocation for the actual io_tlb_mem structure. This simplifies
a lot of the initialization code, and also allows to just check
io_tlb_default_mem to see if swiotlb is in use.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Added a new struct, io_tlb_mem, as the IO TLB memory pool descriptor and
moved relevant global variables into that struct.
This will be useful later to allow for restricted DMA pool.
Signed-off-by: Claire Chang <tientzu@chromium.org>
[hch: rebased]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Lift the double initialization protection from xen-swiotlb to the core
code to avoid exposing too many swiotlb internals. Also upgrade the
check to a warning as it should not happen.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Split swiotlb_tbl_sync_single into two separate funtions for the to device
and to cpu synchronization.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Move the code to find and validate the original buffer address and size
from the callers into swiotlb_bounce. This means a tiny bit of extra
work in the swiotlb_map path, but avoids code duplication and a leads to
a better code structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Now that swiotlb remembers the allocation size there is no need to pass
it back to swiotlb_tbl_unmap_single.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Doing a
prctl(PR_SET_MM, PR_SET_MM_AUXV, addr, 1);
will copy 1 byte from userspace to (quite big) on-stack array
and then stash everything to mm->saved_auxv.
AT_NULL terminator will be inserted at the very end.
/proc/*/auxv handler will find that AT_NULL terminator
and copy original stack contents to userspace.
This devious scheme requires CAP_SYS_RESOURCE.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Make the GENERIC_IRQ_MULTI_HANDLER configuration correct
- Add a missing DT compatible string fir tge Ingenic driver
- Remove the pointless debugfs_file pointer from struct irqdomain
-----BEGIN PGP SIGNATURE-----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=PG58
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of irqchip updates:
- Make the GENERIC_IRQ_MULTI_HANDLER configuration correct
- Add a missing DT compatible string for the Ingenic driver
- Remove the pointless debugfs_file pointer from struct irqdomain"
* tag 'irq-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ingenic: Add support for the JZ4760
dt-bindings/irq: Add compatible string for the JZ4760B
irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLER
ARM: ep93xx: Select GENERIC_IRQ_MULTI_HANDLER directly
irqdomain: Remove debugfs_file from struct irq_domain
lack of reevaluation of the timers which expire in softirq context under
certain circumstances, e.g. when the clock was set.
-----BEGIN PGP SIGNATURE-----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=GZmg
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix in for hrtimers to prevent an interrupt storm caused by
the lack of reevaluation of the timers which expire in softirq context
under certain circumstances, e.g. when the clock was set"
* tag 'timers-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Update softirq_expires_next correctly after __hrtimer_get_next_event()
- Prevent a NULL pointer dereference in the migration_stop_cpu()
mechanims
- Prevent self concurrency of affine_move_task()
- Small fixes and cleanups related to task migration/affinity setting
- Ensure that sync_runqueues_membarrier_state() is invoked on the current
CPU when it is in the cpu mask
-----BEGIN PGP SIGNATURE-----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=WSUq
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler updates:
- Prevent a NULL pointer dereference in the migration_stop_cpu()
mechanims
- Prevent self concurrency of affine_move_task()
- Small fixes and cleanups related to task migration/affinity setting
- Ensure that sync_runqueues_membarrier_state() is invoked on the
current CPU when it is in the cpu mask"
* tag 'sched-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/membarrier: fix missing local execution of ipi_sync_rq_state()
sched: Simplify set_affinity_pending refcounts
sched: Fix affine_move_task() self-concurrency
sched: Optimize migration_cpu_stop()
sched: Collate affine_move_task() stoppers
sched: Simplify migration_cpu_stop()
sched: Fix migration_cpu_stop() requeueing
- A fix for the static_call mechanism so it handles unaligned
addresses correctly.
- Make u64_stats_init() a macro so every instance gets a seperate lockdep
key.
- Make seqcount_latch_init() a macro as well to preserve the static
variable which is used for the lockdep key.
-----BEGIN PGP SIGNATURE-----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=iE+t
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A couple of locking fixes:
- A fix for the static_call mechanism so it handles unaligned
addresses correctly.
- Make u64_stats_init() a macro so every instance gets a seperate
lockdep key.
- Make seqcount_latch_init() a macro as well to preserve the static
variable which is used for the lockdep key"
* tag 'locking-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
seqlock,lockdep: Fix seqcount_latch_init()
u64_stats,lockdep: Fix u64_stats_init() vs lockdep
static_call: Fix the module key fixup
properly handle PID/TID for large PEBS.
- Handle the case properly when there's no PMU and therefore return an
empty list of perf MSRs for VMX to switch instead of reading random
garbage from the stack.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmBOBHoACgkQEsHwGGHe
VUoYHBAAmSY3P4Q91ZS+Sz1orGGX0LufQ0ZVWxnNUD9sFibz5Y2MxyJpQPm6Ae4U
1nO0+QyzbQPwuWKcQxlLHOJXkypkFSdRyR3cpAE5BOIXvqna07xBg/zuTFaOoDek
qn42RHLs5TQB1MNKY+0dyJAfjEHBFrm0CsO27L99TRv5nEsdECM/vUswvasc+QMC
dTS9sMHoiDVwJ8DFn6qmJ8AqkNxmcZgvNOD62TAt8Ac6u6zTGqq1oN+BMpQFRo9a
j/Fu+5PZS4bH/pMlpL0OR6AlmR1PPJ8e1Ik+1Dk0brCrSNdiXtS3DSTllbGxNFi6
4d5oSoStAyDNrihwPm2dw+VofFC03PEVZN095WVq7Iqn9cK/nxFgBEpaIe6fiwa2
MrZ2YiDxrOAin0hxUSu8oLwgOwxmedaSQwo1tyzZswVtXSqc7p4JawzBiIo93RAJ
UHpXI9zwgEyOGUJ95qcbezJVgILJqExjN+SOxaNjoqkAX8Hfgrf4aKDIMrcMC02Z
ZFW86MXL2Rwk+WspAKlWtPgAGuU5sljXeyDK0MRcHwAom8cX+Fod80ocI+xjX8JB
R73cd9dE2iWzIADikCItixzka+HuUBgWDqVT85yTzBt/KqwbIeE7kn6VCJmoJBbw
c9aRcyqEBky8FO6EpD0vIP2jcnlbvUnoq5wG0KV9KXaQDhxtZfk=
=djiL
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Make sure PMU internal buffers are flushed for per-CPU events too and
properly handle PID/TID for large PEBS.
- Handle the case properly when there's no PMU and therefore return an
empty list of perf MSRs for VMX to switch instead of reading random
garbage from the stack.
* tag 'perf_urgent_for_v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/perf: Use RET0 as default for guest_get_msrs to handle "no PMU" case
perf/x86/intel: Set PERF_ATTACH_SCHED_CB for large PEBS and LBR
perf/core: Flush PMU internal buffers for per-CPU events
Merge misc fixes from Andrew Morton:
"28 patches.
Subsystems affected by this series: mm (memblock, pagealloc, hugetlb,
highmem, kfence, oom-kill, madvise, kasan, userfaultfd, memcg, and
zram), core-kernel, kconfig, fork, binfmt, MAINTAINERS, kbuild, and
ia64"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (28 commits)
zram: fix broken page writeback
zram: fix return value on writeback_store
mm/memcg: set memcg when splitting page
mm/memcg: rename mem_cgroup_split_huge_fixup to split_page_memcg and add nr_pages argument
ia64: fix ptrace(PTRACE_SYSCALL_INFO_EXIT) sign
ia64: fix ia64_syscall_get_set_arguments() for break-based syscalls
mm/userfaultfd: fix memory corruption due to writeprotect
kasan: fix KASAN_STACK dependency for HW_TAGS
kasan, mm: fix crash with HW_TAGS and DEBUG_PAGEALLOC
mm/madvise: replace ptrace attach requirement for process_madvise
include/linux/sched/mm.h: use rcu_dereference in in_vfork()
kfence: fix reports if constant function prefixes exist
kfence, slab: fix cache_alloc_debugcheck_after() for bulk allocations
kfence: fix printk format for ptrdiff_t
linux/compiler-clang.h: define HAVE_BUILTIN_BSWAP*
MAINTAINERS: exclude uapi directories in API/ABI section
binfmt_misc: fix possible deadlock in bm_register_write
mm/highmem.c: fix zero_user_segments() with start > end
hugetlb: do early cow when page pinned on src mm
mm: use is_cow_mapping() across tree where proper
...
When a new mm is created, its PASID should be cleared, i.e. the PASID is
initialized to its init state 0 on both ARM and X86.
This patch was part of the series introducing mm->pasid, but got lost
along the way [1]. It still makes sense to have it, because each address
space has a different PASID. And the IOMMU code in
iommu_sva_alloc_pasid() expects the pasid field of a new mm struct to be
cleared.
[1] https://lore.kernel.org/linux-iommu/YDgh53AcQHT+T3L0@otcwcpicx3.sc.intel.com/
Link: https://lkml.kernel.org/r/20210302103837.2562625-1-jean-philippe@linaro.org
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=40h0
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.12-2021-03-12' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Not quite as small this week as I had hoped, but at least this should
be the end of it. All the little known issues have been ironed out -
most of it little stuff, but cancelations being the bigger part. Only
minor tweaks and/or regular fixes expected beyond this point.
- Fix the creds tracking for async (io-wq and SQPOLL)
- Various SQPOLL fixes related to parking, sharing, forking, IOPOLL,
completions, and life times. Much simpler now.
- Make IO threads unfreezable by default, on account of a bug report
that had them spinning on resume. Honestly not quite sure why
thawing leaves us with a perpetual signal pending (causing the
spin), but for now make them unfreezable like there were in 5.11
and prior.
- Move personality_idr to xarray, solving a use-after-free related to
removing an entry from the iterator callback. Buffer idr needs the
same treatment.
- Re-org around and task vs context tracking, enabling the fixing of
cancelations, and then cancelation fixes on top.
- Various little bits of cleanups and hardening, and removal of now
dead parts"
* tag 'io_uring-5.12-2021-03-12' of git://git.kernel.dk/linux-block: (34 commits)
io_uring: fix OP_ASYNC_CANCEL across tasks
io_uring: cancel sqpoll via task_work
io_uring: prevent racy sqd->thread checks
io_uring: remove useless ->startup completion
io_uring: cancel deferred requests in try_cancel
io_uring: perform IOPOLL reaping if canceler is thread itself
io_uring: force creation of separate context for ATTACH_WQ and non-threads
io_uring: remove indirect ctx into sqo injection
io_uring: fix invalid ctx->sq_thread_idle
kernel: make IO threads unfreezable by default
io_uring: always wait for sqd exited when stopping SQPOLL thread
io_uring: remove unneeded variable 'ret'
io_uring: move all io_kiocb init early in io_init_req()
io-wq: fix ref leak for req in case of exit cancelations
io_uring: fix complete_post races for linked req
io_uring: add io_disarm_next() helper
io_uring: fix io_sq_offload_create error handling
io-wq: remove unused 'user' member of io_wq
io_uring: Convert personality_idr to XArray
io_uring: clean R_DISABLED startup mess
...
The io-wq threads were already marked as no-freeze, but the manager was
not. On resume, we perpetually have signal_pending() being true, and
hence the manager will loop and spin 100% of the time.
Just mark the tasks created by create_io_thread() as PF_NOFREEZE by
default, and remove any knowledge of it in io-wq and io_uring.
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Tested-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull networking fixes from David Miller:
1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau.
2) TX skb error handling fix in mt76 driver, also from Felix.
3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman.
4) Avoid double free of percpu pointers when freeing a cloned bpf prog.
From Cong Wang.
5) Use correct printf format for dma_addr_t in ath11k, from Geert
Uytterhoeven.
6) Fix resolve_btfids build with older toolchains, from Kun-Chuan
Hsieh.
7) Don't report truncated frames to mac80211 in mt76 driver, from
Lorenzop Bianconi.
8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang.
9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann.
10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from
Arjun Roy.
11) Ignore routes with deleted nexthop object in mlxsw, from Ido
Schimmel.
12) Need to undo tcp early demux lookup sometimes in nf_nat, from
Florian Westphal.
13) Fix gro aggregation for udp encaps with zero csum, from Daniel
Borkmann.
14) Make sure to always use imp*_ndo_send when necessaey, from Jason A.
Donenfeld.
15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov.
16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin.
17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir
Oltean.
18) Make sure textsearch copntrol block is large enough, from Wilem de
Bruijn.
19) Revert MAC changes to r8152 leading to instability, from Hates Wang.
20) Advance iov in 9p even for empty reads, from Jissheng Zhang.
21) Double hook unregister in nftables, from PabloNeira Ayuso.
22) Fix memleak in ixgbe, fropm Dinghao Liu.
23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne.
24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang
Tang.
25) Fix DOI refcount bugs in cipso, from Paul Moore.
26) One too many irqsave in ibmvnic, from Junlin Yang.
27) Fix infinite loop with MPLS gso segmenting via virtio_net, from
Balazs Nemeth.
* git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits)
s390/qeth: fix notification for pending buffers during teardown
s390/qeth: schedule TX NAPI on QAOB completion
s390/qeth: improve completion of pending TX buffers
s390/qeth: fix memory leak after failed TX Buffer allocation
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
net: check if protocol extracted by virtio_net_hdr_set_proto is correct
net: dsa: xrs700x: check if partner is same as port in hsr join
net: lapbether: Remove netif_start_queue / netif_stop_queue
atm: idt77252: fix null-ptr-dereference
atm: uPD98402: fix incorrect allocation
atm: fix a typo in the struct description
net: qrtr: fix error return code of qrtr_sendmsg()
mptcp: fix length of ADD_ADDR with port sub-option
net: bonding: fix error return code of bond_neigh_init()
net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
net: enetc: set MAC RX FIFO to recommended value
net: davicom: Use platform_get_irq_optional()
net: davicom: Fix regulator not turned off on driver removal
net: davicom: Fix regulator not turned off on failed probe
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
...
There's no need to keep around a dentry pointer to a simple file that
debugfs itself can look up when we need to remove it from the system.
So simplify the code by deleting the variable and cleaning up the logic
around the debugfs file.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/YCvYV53ZdzQSWY6w@kroah.com
hrtimer_force_reprogram() and hrtimer_interrupt() invokes
__hrtimer_get_next_event() to find the earliest expiry time of hrtimer
bases. __hrtimer_get_next_event() does not update
cpu_base::[softirq_]_expires_next to preserve reprogramming logic. That
needs to be done at the callsites.
hrtimer_force_reprogram() updates cpu_base::softirq_expires_next only when
the first expiring timer is a softirq timer and the soft interrupt is not
activated. That's wrong because cpu_base::softirq_expires_next is left
stale when the first expiring timer of all bases is a timer which expires
in hard interrupt context. hrtimer_interrupt() does never update
cpu_base::softirq_expires_next which is wrong too.
That becomes a problem when clock_settime() sets CLOCK_REALTIME forward and
the first soft expiring timer is in the CLOCK_REALTIME_SOFT base. Setting
CLOCK_REALTIME forward moves the clock MONOTONIC based expiry time of that
timer before the stale cpu_base::softirq_expires_next.
cpu_base::softirq_expires_next is cached to make the check for raising the
soft interrupt fast. In the above case the soft interrupt won't be raised
until clock monotonic reaches the stale cpu_base::softirq_expires_next
value. That's incorrect, but what's worse it that if the softirq timer
becomes the first expiring timer of all clock bases after the hard expiry
timer has been handled the reprogramming of the clockevent from
hrtimer_interrupt() will result in an interrupt storm. That happens because
the reprogramming does not use cpu_base::softirq_expires_next, it uses
__hrtimer_get_next_event() which returns the actual expiry time. Once clock
MONOTONIC reaches cpu_base::softirq_expires_next the soft interrupt is
raised and the storm subsides.
Change the logic in hrtimer_force_reprogram() to evaluate the soft and hard
bases seperately, update softirq_expires_next and handle the case when a
soft expiring timer is the first of all bases by comparing the expiry times
and updating the required cpu base fields. Split this functionality into a
separate function to be able to use it in hrtimer_interrupt() as well
without copy paste.
Fixes: 5da7016046 ("hrtimer: Implement support for softirq based hrtimers")
Reported-by: Mikael Beckius <mikael.beckius@windriver.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mikael Beckius <mikael.beckius@windriver.com>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210223160240.27518-1-anna-maria@linutronix.de
Sometimes the PMU internal buffers have to be flushed for per-CPU events
during a context switch, e.g., large PEBS. Otherwise, the perf tool may
report samples in locations that do not belong to the process where the
samples are processed in, because PEBS does not tag samples with PID/TID.
The current code only flush the buffers for a per-task event. It doesn't
check a per-CPU event.
Add a new event state flag, PERF_ATTACH_SCHED_CB, to indicate that the
PMU internal buffers have to be flushed for this event during a context
switch.
Add sched_cb_entry and perf_sched_cb_usages back to track the PMU/cpuctx
which is required to be flushed.
Only need to invoke the sched_task() for per-CPU events in this patch.
The per-task events have been handled in perf_event_context_sched_in/out
already.
Fixes: 9c964efa43 ("perf/x86/intel: Drain the PEBS buffer during context switches")
Reported-by: Gabriel Marin <gmx@google.com>
Originally-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20201130193842.10569-1-kan.liang@linux.intel.com
Provided the target address of a R_X86_64_PC32 relocation is aligned,
the low two bits should be invariant between the relative and absolute
value.
Turns out the address is not aligned and things go sideways, ensure we
transfer the bits in the absolute form when fixing up the key address.
Fixes: 73f44fe19d ("static_call: Allow module use without exposing static_call_key")
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20210225220351.GE4746@worktop.programming.kicks-ass.net
The function sync_runqueues_membarrier_state() should copy the
membarrier state from the @mm received as parameter to each runqueue
currently running tasks using that mm.
However, the use of smp_call_function_many() skips the current runqueue,
which is unintended. Replace by a call to on_each_cpu_mask().
Fixes: 227a4aadc7 ("sched/membarrier: Fix p->mm->membarrier_state racy load")
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org # 5.4.x+
Link: https://lore.kernel.org/r/74F1E842-4A84-47BF-B6C2-5407DFDD4A4A@gmail.com
Now that we have set_affinity_pending::stop_pending to indicate if a
stopper is in progress, and we have the guarantee that if that stopper
exists, it will (eventually) complete our @pending we can simplify the
refcount scheme by no longer counting the stopper thread.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.724130207@infradead.org
Consider:
sched_setaffinity(p, X); sched_setaffinity(p, Y);
Then the first will install p->migration_pending = &my_pending; and
issue stop_one_cpu_nowait(pending); and the second one will read
p->migration_pending and _also_ issue: stop_one_cpu_nowait(pending),
the _SAME_ @pending.
This causes stopper list corruption.
Add set_affinity_pending::stop_pending, to indicate if a stopper is in
progress.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.649146419@infradead.org
When the purpose of migration_cpu_stop() is to migrate the task to
'any' valid CPU, don't migrate the task when it's already running on a
valid CPU.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.569238629@infradead.org
The SCA_MIGRATE_ENABLE and task_running() cases are almost identical,
collapse them to avoid further duplication.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.500108964@infradead.org
When affine_move_task() issues a migration_cpu_stop(), the purpose of
that function is to complete that @pending, not any random other
p->migration_pending that might have gotten installed since.
This realization much simplifies migration_cpu_stop() and allows
further necessary steps to fix all this as it provides the guarantee
that @pending's stopper will complete @pending (and not some random
other @pending).
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.430014682@infradead.org
When affine_move_task(p) is called on a running task @p, which is not
otherwise already changing affinity, we'll first set
p->migration_pending and then do:
stop_one_cpu(cpu_of_rq(rq), migration_cpu_stop, &arg);
This then gets us to migration_cpu_stop() running on the CPU that was
previously running our victim task @p.
If we find that our task is no longer on that runqueue (this can
happen because of a concurrent migration due to load-balance etc.),
then we'll end up at the:
} else if (dest_cpu < 1 || pending) {
branch. Which we'll take because we set pending earlier. Here we first
check if the task @p has already satisfied the affinity constraints,
if so we bail early [A]. Otherwise we'll reissue migration_cpu_stop()
onto the CPU that is now hosting our task @p:
stop_one_cpu_nowait(cpu_of(rq), migration_cpu_stop,
&pending->arg, &pending->stop_work);
Except, we've never initialized pending->arg, which will be all 0s.
This then results in running migration_cpu_stop() on the next CPU with
arg->p == NULL, which gives the by now obvious result of fireworks.
The cure is to change affine_move_task() to always use pending->arg,
furthermore we can use the exact same pattern as the
SCA_MIGRATE_ENABLE case, since we'll block on the pending->done
completion anyway, no point in adding yet another completion in
stop_one_cpu().
This then gives a clear distinction between the two
migration_cpu_stop() use cases:
- sched_exec() / migrate_task_to() : arg->pending == NULL
- affine_move_task() : arg->pending != NULL;
And we can have it ignore p->migration_pending when !arg->pending. Any
stop work from sched_exec() / migrate_task_to() is in addition to stop
works from affine_move_task(), which will be sufficient to issue the
completion.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.357743989@infradead.org
-----BEGIN PGP SIGNATURE-----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=w0Sf
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A bit of a mix between fallout from the worker change, cleanups and
reductions now possible from that change, and fixes in general. In
detail:
- Fully serialize manager and worker creation, fixing races due to
that.
- Clean up some naming that had gone stale.
- SQPOLL fixes.
- Fix race condition around task_work rework that went into this
merge window.
- Implement unshare. Used for when the original task does unshare(2)
or setuid/seteuid and friends, drops the original workers and forks
new ones.
- Drop the only remaining piece of state shuffling we had left, which
was cred. Move it into issue instead, and we can drop all of that
code too.
- Kill f_op->flush() usage. That was such a nasty hack that we had
out of necessity, we no longer need it.
- Following from ->flush() removal, we can also drop various bits of
ctx state related to SQPOLL and cancelations.
- Fix an issue with IOPOLL retry, which originally was fallout from a
filemap change (removing iov_iter_revert()), but uncovered an issue
with iovec re-import too late.
- Fix an issue with system suspend.
- Use xchg() for fallback work, instead of cmpxchg().
- Properly destroy io-wq on exec.
- Add create_io_thread() core helper, and use that in io-wq and
io_uring. This allows us to remove various silly completion events
related to thread setup.
- A few error handling fixes.
This should be the grunt of fixes necessary for the new workers, next
week should be quieter. We've got a pending series from Pavel on
cancelations, and how tasks and rings are indexed. Outside of that,
should just be minor fixes. Even with these fixes, we're still killing
a net ~80 lines"
* tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits)
io_uring: don't restrict issue_flags for io_openat
io_uring: make SQPOLL thread parking saner
io-wq: kill hashed waitqueue before manager exits
io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return
io_uring: don't keep looping for more events if we can't flush overflow
io_uring: move to using create_io_thread()
kernel: provide create_io_thread() helper
io_uring: reliably cancel linked timeouts
io_uring: cancel-match based on flags
io-wq: ensure all pending work is canceled on exit
io_uring: ensure that threads freeze on suspend
io_uring: remove extra in_idle wake up
io_uring: inline __io_queue_async_work()
io_uring: inline io_req_clean_work()
io_uring: choose right tctx->io_wq for try cancel
io_uring: fix -EAGAIN retry with IOPOLL
io-wq: fix error path leak of buffered write hash map
io_uring: remove sqo_task
io_uring: kill sqo_dead and sqo submission halting
io_uring: ignore double poll add on the same waitqueue head
...
As pointed out by Ilya and explained in the new comment, there's a
discrepancy between x86 and BPF CMPXCHG semantics: BPF always loads
the value from memory into r0, while x86 only does so when r0 and the
value in memory are different. The same issue affects s390.
At first this might sound like pure semantics, but it makes a real
difference when the comparison is 32-bit, since the load will
zero-extend r0/rax.
The fix is to explicitly zero-extend rax after doing such a
CMPXCHG. Since this problem affects multiple archs, this is done in
the verifier by patching in a BPF_ZEXT_REG instruction after every
32-bit cmpxchg. Any archs that don't need such manual zero-extension
can do a look-ahead with insn_is_zext to skip the unnecessary mov.
Note this still goes on top of Ilya's patch:
https://lore.kernel.org/bpf/20210301154019.129110-1-iii@linux.ibm.com/T/#u
Differences v5->v6[1]:
- Moved is_cmpxchg_insn and ensured it can be safely re-used. Also renamed it
and removed 'inline' to match the style of the is_*_function helpers.
- Fixed up comments in verifier test (thanks for the careful review, Martin!)
Differences v4->v5[1]:
- Moved the logic entirely into opt_subreg_zext_lo32_rnd_hi32, thanks to Martin
for suggesting this.
Differences v3->v4[1]:
- Moved the optimization against pointless zext into the correct place:
opt_subreg_zext_lo32_rnd_hi32 is called _after_ fixup_bpf_calls.
Differences v2->v3[1]:
- Moved patching into fixup_bpf_calls (patch incoming to rename this function)
- Added extra commentary on bpf_jit_needs_zext
- Added check to avoid adding a pointless zext(r0) if there's already one there.
Difference v1->v2[1]: Now solved centrally in the verifier instead of
specifically for the x86 JIT. Thanks to Ilya and Daniel for the suggestions!
[1] v5: https://lore.kernel.org/bpf/CA+i-1C3ytZz6FjcPmUg5s4L51pMQDxWcZNvM86w4RHZ_o2khwg@mail.gmail.com/T/#t
v4: https://lore.kernel.org/bpf/CA+i-1C3ytZz6FjcPmUg5s4L51pMQDxWcZNvM86w4RHZ_o2khwg@mail.gmail.com/T/#t
v3: https://lore.kernel.org/bpf/08669818-c99d-0d30-e1db-53160c063611@iogearbox.net/T/#t
v2: https://lore.kernel.org/bpf/08669818-c99d-0d30-e1db-53160c063611@iogearbox.net/T/#t
v1: https://lore.kernel.org/bpf/d7ebaefb-bfd6-a441-3ff2-2fdfe699b1d2@iogearbox.net/T/#t
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Fixes: 5ffa25502b ("bpf: Add instructions for atomic_[cmp]xchg")
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Provide a generic helper for setting up an io_uring worker. Returns a
task_struct so that the caller can do whatever setup is needed, then call
wake_up_new_task() to kick it into gear.
Add a kernel_clone_args member, io_thread, which tells copy_process() to
mark the task with PF_IO_WORKER.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
insn_has_def32() returns false for 32-bit BPF_FETCH insns. This makes
adjust_insn_aux_data() incorrectly set zext_dst, as can be seen in [1].
This happens because insn_no_def() does not know about the BPF_FETCH
variants of BPF_STX.
Fix in two steps.
First, replace insn_no_def() with insn_def_regno(), which returns the
register an insn defines. Normally insn_no_def() calls are followed by
insn->dst_reg uses; replace those with the insn_def_regno() return
value.
Second, adjust the BPF_STX special case in is_reg64() to deal with
queries made from opt_subreg_zext_lo32_rnd_hi32(), where the state
information is no longer available. Add a comment, since the purpose
of this special case is not clear at first glance.
[1] https://lore.kernel.org/bpf/20210223150845.1857620-1-jackmanb@google.com/
Fixes: 5ffa25502b ("bpf: Add instructions for atomic_[cmp]xchg")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/bpf/20210301154019.129110-1-iii@linux.ibm.com
If tracing is disabled for some reason (traceoff_on_warning, command line,
etc), the ftrace selftests are guaranteed to fail, as their results are
defined by trace data in the ring buffers. If the ring buffers are turned
off, the tests will fail, due to lack of data.
Because tracing being disabled is for a specific reason (warning, user
decided to, etc), it does not make sense to enable tracing to run the self
tests, as the test output may corrupt the reason for the tracing to be
disabled.
Instead, simply skip the self tests and report that they are being skipped
due to tracing being disabled.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When the CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is enabled, and the time
stamps are detected as not being valid, it reports information about the
write stamp, but does not show the before_stamp which is still useful
information. Also, it should give a warning once, such that tests detect
this happening.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Part of the logic of the new time stamp code depends on the before_stamp and
the write_stamp to be different if the write_stamp does not match the last
event on the buffer, as it will be used to calculate the delta of the next
event written on the buffer.
The discard logic depends on this, as the next event to come in needs to
inject a full timestamp as it can not rely on the last event timestamp in
the buffer because it is unknown due to events after it being discarded. But
by changing the write_stamp back to the time before it, it forces the next
event to use a full time stamp, instead of relying on it.
The issue came when a full time stamp was used for the event, and
rb_time_delta() returns zero in that case. The update to the write_stamp
(which subtracts delta) made it not change. Then when the event is removed
from the buffer, because the before_stamp and write_stamp still match, the
next event written would calculate its delta from the write_stamp, but that
would be wrong as the write_stamp is of the time of the event that was
discarded.
In the case that the delta change being made to write_stamp is zero, set the
before_stamp to zero as well, and this will force the next event to inject a
full timestamp and not use the current write_stamp.
Cc: stable@vger.kernel.org
Fixes: a389d86f7f ("ring-buffer: Have nested events still record running time stamp")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A declaration of function "int trace_empty(struct trace_iterator *iter)"
shows up twice in the header file kernel/trace/trace.h
Link: https://lkml.kernel.org/r/20210304092348.208033-1-y.karadz@gmail.com
Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=ccMs
-----END PGP SIGNATURE-----
Merge tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A few stragglers (and one due to me missing it originally), and fixes
for changes in this merge window mostly. In particular:
- blktrace cleanups (Chaitanya, Greg)
- Kill dead blk_pm_* functions (Bart)
- Fixes for the bio alloc changes (Christoph)
- Fix for the partition changes (Christoph, Ming)
- Fix for turning off iopoll with polled IO inflight (Jeffle)
- nbd disconnect fix (Josef)
- loop fsync error fix (Mauricio)
- kyber update depth fix (Yang)
- max_sectors alignment fix (Mikulas)
- Add bio_max_segs helper (Matthew)"
* tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block: (21 commits)
block: Add bio_max_segs
blktrace: fix documentation for blk_fill_rw()
block: memory allocations in bounce_clone_bio must not fail
block: remove the gfp_mask argument to bounce_clone_bio
block: fix bounce_clone_bio for passthrough bios
block-crypto-fallback: use a bio_set for splitting bios
block: fix logging on capacity change
blk-settings: align max_sectors on "logical_block_size" boundary
block: reopen the device in blkdev_reread_part
block: don't skip empty device in in disk_uevent
blktrace: remove debugfs file dentries from struct blk_trace
nbd: handle device refs for DESTROY_ON_DISCONNECT properly
kyber: introduce kyber_depth_updated()
loop: fix I/O error on fsync() in detached loop devices
block: fix potential IO hang when turning off io_poll
block: get rid of the trace rq insert wrapper
blktrace: fix blk_rq_merge documentation
blktrace: fix blk_rq_issue documentation
blktrace: add blk_fill_rwbs documentation comment
block: remove superfluous param in blk_fill_rwbs()
...
-----BEGIN PGP SIGNATURE-----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=oc8u
-----END PGP SIGNATURE-----
Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block
Pull io_uring thread rewrite from Jens Axboe:
"This converts the io-wq workers to be forked off the tasks in question
instead of being kernel threads that assume various bits of the
original task identity.
This kills > 400 lines of code from io_uring/io-wq, and it's the worst
part of the code. We've had several bugs in this area, and the worry
is always that we could be missing some pieces for file types doing
unusual things (recent /dev/tty example comes to mind, userfaultfd
reads installing file descriptors is another fun one... - both of
which need special handling, and I bet it's not the last weird oddity
we'll find).
With these identical workers, we can have full confidence that we're
never missing anything. That, in itself, is a huge win. Outside of
that, it's also more efficient since we're not wasting space and code
on tracking state, or switching between different states.
I'm sure we're going to find little things to patch up after this
series, but testing has been pretty thorough, from the usual
regression suite to production. Any issue that may crop up should be
manageable.
There's also a nice series of further reductions we can do on top of
this, but I wanted to get the meat of it out sooner rather than later.
The general worry here isn't that it's fundamentally broken. Most of
the little issues we've found over the last week have been related to
just changes in how thread startup/exit is done, since that's the main
difference between using kthreads and these kinds of threads. In fact,
if all goes according to plan, I want to get this into the 5.10 and
5.11 stable branches as well.
That said, the changes outside of io_uring/io-wq are:
- arch setup, simple one-liner to each arch copy_thread()
implementation.
- Removal of net and proc restrictions for io_uring, they are no
longer needed or useful"
* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
io-wq: remove now unused IO_WQ_BIT_ERROR
io_uring: fix SQPOLL thread handling over exec
io-wq: improve manager/worker handling over exec
io_uring: ensure SQPOLL startup is triggered before error shutdown
io-wq: make buffered file write hashed work map per-ctx
io-wq: fix race around io_worker grabbing
io-wq: fix races around manager/worker creation and task exit
io_uring: ensure io-wq context is always destroyed for tasks
arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
io_uring: cleanup ->user usage
io-wq: remove nr_process accounting
io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
net: remove cmsg restriction from io_uring based send/recvmsg calls
Revert "proc: don't allow async path resolution of /proc/self components"
Revert "proc: don't allow async path resolution of /proc/thread-self components"
io_uring: move SQPOLL thread io-wq forked worker
io-wq: make io_wq_fork_thread() available to other users
io-wq: only remove worker from free_list, if it was there
io_uring: remove io_identity
io_uring: remove any grabbing of context
...
Pull misc vfs updates from Al Viro:
"Assorted stuff pile - no common topic here"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
whack-a-mole: don't open-code iminor/imajor
9p: fix misuse of sscanf() in v9fs_stat2inode()
audit_alloc_mark(): don't open-code ERR_CAST()
fs/inode.c: make inode_init_always() initialize i_ino to 0
vfs: don't unnecessarily clone write access for writable fds
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Two memory encryption related patches (SWIOTLB is enabled by default
for AMD-SEV):
- Add support for alignment so that NVME can properly work
- Keep track of requested DMA buffers length, as underlaying hardware
devices can trip SWIOTLB to bounce too much and crash the kernel
And a tiny fix to use proper APIs in drivers"
* 'stable/for-linus-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: Validate bounce size in the sync/unmap path
nvme-pci: set min_align_mask
swiotlb: respect min_align_mask
swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single
swiotlb: refactor swiotlb_tbl_map_single
swiotlb: clean up swiotlb_tbl_unmap_single
swiotlb: factor out a nr_slots helper
swiotlb: factor out an io_tlb_offset helper
swiotlb: add a IO_TLB_SIZE define
driver core: add a min_align_mask field to struct device_dma_parameters
sdhci: stop poking into swiotlb internals
Alexei Starovoitov says:
====================
pull-request: bpf 2021-02-26
1) Fix for bpf atomic insns with src_reg=r0, from Brendan.
2) Fix use after free due to bpf_prog_clone, from Cong.
3) Drop imprecise verifier log message, from Dmitrii.
4) Remove incorrect blank line in bpf helper description, from Hangbin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: No need to drop the packet when there is no geneve opt
bpf: Remove blank line in bpf helper description comment
tools/resolve_btfids: Fix build error with older host toolchains
selftests/bpf: Fix a compiler warning in global func test
bpf: Drop imprecise log message
bpf: Clear percpu pointers in bpf_prog_clone_free()
bpf: Fix a warning message in mark_ptr_not_null_reg()
bpf, x86: Fix BPF_FETCH atomic and/or/xor with r0 as src
====================
Link: https://lore.kernel.org/r/20210226193737.57004-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix lockdep false alarm on resume-from-cpuidle path
- Fix memory leak in kexec_file
- Fix module linker script to work with GDB
- Fix error code when trying to use uprobes with AArch32 instructions
- Fix late VHE enabling with 64k pages
- Add missing ISBs after TLB invalidation
- Fix seccomp when tracing syscall -1
- Fix stacktrace return code at end of stack
- Fix inconsistent whitespace for pointer return values
- Fix compiler warnings when building with W=1
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmA40kUQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLMUB/93o3Ucd3SeLLmOziyZMWjxCNcuzXAXDhFH
z0q0Zq8U5+xHaCH+jPASNwS7gT6dMX8E60SlXcvVaHuBaH5zsrZnOtpJ5mZQAQ7E
nR1M5ANfusMJ8uRpDHhy5ymJ4IcE/yn74rapBIeGs1e4vWF60Lb6nSVrEJMNRada
zbRr2z9bMecQPGX+KSWpgYg4dLRpyTo8oSYJiYmyoSczGvXhrFHlnIJeaKrJuvGt
IIhil8l9uZd5j0ucVWGiYgAcAuqzgkH2yEiNbkGRwn0nMK+4HGbXpEuzUm/90p3y
lRLQSvx/hKwerIlodUYbFDx4FMXoFfMRQm/8/6tCBrUn/4exDslZ
=wuLk
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The big one is a fix for the VHE enabling path during early boot,
where the code enabling the MMU wasn't necessarily in the identity map
of the new page-tables, resulting in a consistent crash with 64k
pages. In fixing that, we noticed some missing barriers too, so we
added those for the sake of architectural compliance.
Other than that, just the usual merge window trickle. There'll be more
to come, too.
Summary:
- Fix lockdep false alarm on resume-from-cpuidle path
- Fix memory leak in kexec_file
- Fix module linker script to work with GDB
- Fix error code when trying to use uprobes with AArch32 instructions
- Fix late VHE enabling with 64k pages
- Add missing ISBs after TLB invalidation
- Fix seccomp when tracing syscall -1
- Fix stacktrace return code at end of stack
- Fix inconsistent whitespace for pointer return values
- Fix compiler warnings when building with W=1"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: stacktrace: Report when we reach the end of the stack
arm64: ptrace: Fix seccomp of traced syscall -1 (NO_SYSCALL)
arm64: Add missing ISB after invalidating TLB in enter_vhe
arm64: Add missing ISB after invalidating TLB in __primary_switch
arm64: VHE: Enable EL2 MMU from the idmap
KVM: arm64: make the hyp vector table entries local
arm64/mm: Fixed some coding style issues
arm64: uprobe: Return EOPNOTSUPP for AARCH32 instruction probing
kexec: move machine_kexec_post_load() to public interface
arm64 module: set plt* section addresses to 0x0
arm64: kexec_file: fix memory leakage in create_dtb() when fdt_open_into() fails
arm64: spectre: Prevent lockdep splat on v4 mitigation enable path
Currently breakpoints in kernel .init.text section are not handled
correctly while allowing to remove them even after corresponding pages
have been freed.
Fix it via killing .init.text section breakpoints just prior to initmem
pages being freed.
Doug: "HW breakpoints aren't handled by this patch but it's probably
not such a big deal".
Link: https://lkml.kernel.org/r/20210224081652.587785-1-sumit.garg@linaro.org
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Suggested-by: Doug Anderson <dianders@chromium.org>
Acked-by: Doug Anderson <dianders@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
