Here are series of patches that add SPDX tags to different kernel files,
based on two different things:
- SPDX entries are added to a bunch of files that we missed a year ago
that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the last
big sweep, or they were Makefile/Kconfig files, which we didn't
touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on the
patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the next
few weeks as the tools and reviewers crunch through the more "odd"
variants of how to say "GPLv2" that developers have come up with over
the years, combined with other fun oddities (GPL + a BSD disclaimer?)
that are being unearthed, with the goal for the whole kernel to be
cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOP8uw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynmGQCgy3evqzleuOITDpuWaxewFdHqiJYAnA7KRw4H
1KwtfRnMtG6dk/XaS7H7
=O9lH
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull SPDX update from Greg KH:
"Here is a series of patches that add SPDX tags to different kernel
files, based on two different things:
- SPDX entries are added to a bunch of files that we missed a year
ago that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the
last big sweep, or they were Makefile/Kconfig files, which we
didn't touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the
next few weeks as the tools and reviewers crunch through the more
"odd" variants of how to say "GPLv2" that developers have come up with
over the years, combined with other fun oddities (GPL + a BSD
disclaimer?) that are being unearthed, with the goal for the whole
kernel to be cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches"
* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
...
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kflag bit determines whether FWD is for struct or union. Use that bit.
Fixes: c93cc69004 ("bpftool: add ability to dump BTF types")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
For a host which has a lower rlimit for max locked memory (e.g., 64KB),
the following error occurs in one of our production systems:
# /usr/sbin/bpftool prog load /paragon/pods/52877437/home/mark.o \
/sys/fs/bpf/paragon_mark_21 type cgroup/skb \
map idx 0 pinned /sys/fs/bpf/paragon_map_21
libbpf: Error in bpf_object__probe_name():Operation not permitted(1).
Couldn't load basic 'r0 = 0' BPF program.
Error: failed to open object file
The reason is due to low locked memory during bpf_object__probe_name()
which probes whether program name is supported in kernel or not
during __bpf_object__open_xattr().
bpftool program load already tries to relax mlock rlimit before
bpf_object__load(). Let us move set_max_rlimit() before
__bpf_object__open_xattr(), which fixed the issue here.
Fixes: 47eff61777 ("bpf, libbpf: introduce bpf_object__probe_caps to test BPF capabilities")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
tools/bpf/bpftool/.gitignore has the "bpftool" pattern, which is
intended to ignore the following build artifact:
tools/bpf/bpftool/bpftool
However, the .gitignore entry is effective not only for the current
directory, but also for any sub-directories.
So, from the point of .gitignore grammar, the following check-in file
is also considered to be ignored:
tools/bpf/bpftool/bash-completion/bpftool
As the manual gitignore(5) says "Files already tracked by Git are not
affected", this is not a problem as far as Git is concerned.
However, Git is not the only program that parses .gitignore because
.gitignore is useful to distinguish build artifacts from source files.
For example, tar(1) supports the --exclude-vcs-ignore option. As of
writing, this option does not work perfectly, but it intends to create
a tarball excluding files specified by .gitignore.
So, I believe it is better to fix this issue.
You can fix it by prefixing the pattern with a slash; the leading slash
means the specified pattern is relative to the current directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch supports probing for the new BPF_MAP_TYPE_SK_STORAGE.
BPF_MAP_TYPE_SK_STORAGE enforces BTF usage, so the new probe
requires to create and load a BTF also.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Document usage and sample output format for `btf dump` sub-command.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add new `btf dump` sub-command to bpftool. It allows to dump
human-readable low-level BTF types representation of BTF types. BTF can
be retrieved from few different sources:
- from BTF object by ID;
- from PROG, if it has associated BTF;
- from MAP, if it has associated BTF data; it's possible to narrow
down types to either key type, value type, both, or all BTF types;
- from ELF file (.BTF section).
Output format mostly follows BPF verifier log format with few notable
exceptions:
- all the type/field/param/etc names are enclosed in single quotes to
allow easier grepping and to stand out a little bit more;
- FUNC_PROTO output follows STRUCT/UNION/ENUM format of having one
line per each argument; this is more uniform and allows easy
grepping, as opposed to succinct, but inconvenient format that BPF
verifier log is using.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test meant to use the saved value of errno. Given the current code, it
makes no practical difference however.
Fixes: bf598a8f0f ("bpftool: Improve handling of ENOENT on map dumps")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
"bpftool map create" has an infinite loop on "while (argc)". The error
case is missing.
Symptoms: when forgetting to type the keyword 'type' in front of 'hash':
$ sudo bpftool map create /sys/fs/bpf/dir/foobar hash key 8 value 8 entries 128
(infinite loop, taking all the CPU)
^C
After the patch:
$ sudo bpftool map create /sys/fs/bpf/dir/foobar hash key 8 value 8 entries 128
Error: unknown arg hash
Fixes: 0b592b5a01 ("tools: bpftool: add map create command")
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Right now there is no way to query whether BPF flow_dissector program
is attached to a network namespace or not. In previous commit, I added
support for querying that info, show it when doing `bpftool net`:
$ bpftool prog loadall ./bpf_flow.o \
/sys/fs/bpf/flow type flow_dissector \
pinmaps /sys/fs/bpf/flow
$ bpftool prog
3: flow_dissector name _dissect tag 8c9e917b513dd5cc gpl
loaded_at 2019-04-23T16:14:48-0700 uid 0
xlated 656B jited 461B memlock 4096B map_ids 1,2
btf_id 1
...
$ bpftool net -j
[{"xdp":[],"tc":[],"flow_dissector":[]}]
$ bpftool prog attach pinned \
/sys/fs/bpf/flow/flow_dissector flow_dissector
$ bpftool net -j
[{"xdp":[],"tc":[],"flow_dissector":["id":3]}]
Doesn't show up in a different net namespace:
$ ip netns add test
$ ip netns exec test bpftool net -j
[{"xdp":[],"tc":[],"flow_dissector":[]}]
Non-json output:
$ bpftool net
xdp:
tc:
flow_dissector:
id 3
v2:
* initialization order (Jakub Kicinski)
* clear errno for batch mode (Quentin Monnet)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Let's print btf id of map similar to the way we are printing it
for programs.
Sample output:
user@test# bpftool map -f
61: lpm_trie flags 0x1
key 20B value 8B max_entries 1 memlock 4096B
133: array name test_btf_id flags 0x0
key 4B value 4B max_entries 4 memlock 4096B
pinned /sys/fs/bpf/test100
btf_id 174
170: array name test_btf_id flags 0x0
key 4B value 4B max_entries 4 memlock 4096B
btf_id 240
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Let's move the final newline printing in show_map_close_plain() at
the end of the function because it looks correct and consistent with
prog.c. Also let's do related changes for the line which prints
pinned file name.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for recently added BPF_PROG_TYPE_CGROUP_SYSCTL program type
and BPF_CGROUP_SYSCTL attach type.
Example of bpftool output with sysctl program from selftests:
# bpftool p load ./test_sysctl_prog.o /mnt/bpf/sysctl_prog type cgroup/sysctl
# bpftool p l
9: cgroup_sysctl name sysctl_tcp_mem tag 0dd05f81a8d0d52e gpl
loaded_at 2019-04-16T12:57:27-0700 uid 0
xlated 1008B jited 623B memlock 4096B
# bpftool c a /mnt/cgroup2/bla sysctl id 9
# bpftool c t
CgroupPath
ID AttachType AttachFlags Name
/mnt/cgroup2/bla
9 sysctl sysctl_tcp_mem
# bpftool c d /mnt/cgroup2/bla sysctl id 9
# bpftool c t
CgroupPath
ID AttachType AttachFlags Name
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
avoids outputting a series of
value:
No space left on device
The value itself is not wrong but bpf_fd_reuseport_array_lookup_elem() can
only return it if the map was created with value_size = 8. There's nothing
bpftool can do about it. Instead of repeating this error for every key in
the map, print an explanatory warning and a specialized error.
example before:
key: 00 00 00 00
value:
No space left on device
key: 01 00 00 00
value:
No space left on device
key: 02 00 00 00
value:
No space left on device
Found 0 elements
example after:
Warning: cannot read values from reuseport_sockarray map with value_size != 8
key: 00 00 00 00 value: <cannot read>
key: 01 00 00 00 value: <cannot read>
key: 02 00 00 00 value: <cannot read>
Found 0 elements
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit bf598a8f0f ("bpftool: Improve handling of ENOENT on map dumps")
used print_entry_plain() in case of ENOENT. However, that commit introduces
dead code. Per-cpu maps are zero-filled. When reading them, it's all or
nothing. There will never be a case where some cpus have an entry and
others don't.
The truth is that ENOENT is an error case. Use print_entry_error() to
output the desired message. That function's "value" parameter is also
renamed to indicate that we never use it for an actual map value.
The output format is unchanged.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Linux kernel now supports statistics for BPF programs, and bpftool is
able to dump them. However, these statistics are not enabled by default,
and administrators may not know how to access them.
Add a paragraph in bpftool documentation, under the description of the
"bpftool prog show" command, to explain that such statistics are
available and that their collection is controlled via a dedicated sysctl
knob.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Manual pages would tell that option "-v" (lower case) would print the
version number for bpftool. This is wrong: the short name of the option
is "-V" (upper case). Fix the documentation accordingly.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The "pinmaps" keyword is present in the man page, in the verbose
description of the "bpftool prog load" command. However, it is missing
from the summary of available commands at the beginning of the file. Add
it there as well.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When trying to dump the tree of all cgroups under a given root node,
bpftool attempts to query programs of all available attach types. Some
of those attach types do not support queries, therefore several of the
calls are actually expected to fail.
Those calls set errno to EINVAL, which has no consequence for dumping
the rest of the tree. It does have consequences however if errno is
inspected at a later time. For example, bpftool batch mode relies on
errno to determine whether a command has succeeded, and whether it
should carry on with the next command. Setting errno to EINVAL when
everything worked as expected would therefore make such command fail:
# echo 'cgroup tree \n net show' | \
bpftool batch file -
To improve this, reset errno when its value is EINVAL after attempting
to show programs for all existing attach types in do_show_tree_fn().
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 569b0c7773 ("tools/bpftool: show btf id in program information")
made bpftool print an empty line after each program entry when listing
the BPF programs loaded on the system (plain output). This is especially
confusing when some programs have an associated BTF id, and others
don't. Let's remove the blank line.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Let's add a way to know whether a program has btf context.
Patch adds 'btf_id' in the output of program listing.
When btf_id is present, it means program has btf context.
Sample output:
user@test# bpftool prog list
25: xdp name xdp_prog1 tag 539ec6ce11b52f98 gpl
loaded_at 2019-04-10T11:44:20+0900 uid 0
xlated 488B not jited memlock 4096B map_ids 23
btf_id 1
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add the ability to bpftool to handle BTF Var and DataSec kinds
in order to dump them out of btf_dumper_type(). The value has a
single object with the section name, which itself holds an array
of variables it dumps. A single variable is an object by itself
printed along with its name. From there further type information
is dumped along with corresponding value information.
Example output from .rodata:
# ./bpftool m d i 150
[{
"value": {
".rodata": [{
"load_static_data.bar": 18446744073709551615
},{
"num2": 24
},{
"num5": 43947
},{
"num6": 171
},{
"str0": [97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,0,0,0,0,0,0
]
},{
"struct0": {
"a": 42,
"b": 4278120431,
"c": 1229782938247303441
}
},{
"struct2": {
"a": 0,
"b": 0,
"c": 0
}
}
]
}
}
]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This generic extension to BPF maps allows for directly loading
an address residing inside a BPF map value as a single BPF
ldimm64 instruction!
The idea is similar to what BPF_PSEUDO_MAP_FD does today, which
is a special src_reg flag for ldimm64 instruction that indicates
that inside the first part of the double insns's imm field is a
file descriptor which the verifier then replaces as a full 64bit
address of the map into both imm parts. For the newly added
BPF_PSEUDO_MAP_VALUE src_reg flag, the idea is the following:
the first part of the double insns's imm field is again a file
descriptor corresponding to the map, and the second part of the
imm field is an offset into the value. The verifier will then
replace both imm parts with an address that points into the BPF
map value at the given value offset for maps that support this
operation. Currently supported is array map with single entry.
It is possible to support more than just single map element by
reusing both 16bit off fields of the insns as a map index, so
full array map lookup could be expressed that way. It hasn't
been implemented here due to lack of concrete use case, but
could easily be done so in future in a compatible way, since
both off fields right now have to be 0 and would correctly
denote a map index 0.
The BPF_PSEUDO_MAP_VALUE is a distinct flag as otherwise with
BPF_PSEUDO_MAP_FD we could not differ offset 0 between load of
map pointer versus load of map's value at offset 0, and changing
BPF_PSEUDO_MAP_FD's encoding into off by one to differ between
regular map pointer and map value pointer would add unnecessary
complexity and increases barrier for debugability thus less
suitable. Using the second part of the imm field as an offset
into the value does /not/ come with limitations since maximum
possible value size is in u32 universe anyway.
This optimization allows for efficiently retrieving an address
to a map value memory area without having to issue a helper call
which needs to prepare registers according to calling convention,
etc, without needing the extra NULL test, and without having to
add the offset in an additional instruction to the value base
pointer. The verifier then treats the destination register as
PTR_TO_MAP_VALUE with constant reg->off from the user passed
offset from the second imm field, and guarantees that this is
within bounds of the map value. Any subsequent operations are
normally treated as typical map value handling without anything
extra needed from verification side.
The two map operations for direct value access have been added to
array map for now. In future other types could be supported as
well depending on the use case. The main use case for this commit
is to allow for BPF loader support for global variables that
reside in .data/.rodata/.bss sections such that we can directly
load the address of them with minimal additional infrastructure
required. Loader support has been added in subsequent commits for
libbpf library.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For historical reasons the helper to loop over maps in an object
is called bpf_map__for_each while it really should be called
bpf_object__for_each_map. Rename and add a correctly named
define for backward compatibility.
Switch all in-tree users to the correct name (Quentin).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpftool has support for attach types "stream_verdict" and
"stream_parser" but the documentation was referring to them as
"skb_verdict" and "skb_parse". The inconsistency comes from commit
b7d3826c2e ("bpf: bpftool, add support for attaching programs to
maps").
This patch changes the documentation to match the implementation:
- "bpftool prog help"
- man pages
- bash completion
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-02-16
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) numerous libbpf API improvements, from Andrii, Andrey, Yonghong.
2) test all bpf progs in alu32 mode, from Jiong.
3) skb->sk access and bpf_sk_fullsock(), bpf_tcp_sock() helpers, from Martin.
4) support for IP encap in lwt bpf progs, from Peter.
5) remove XDP_QUERY_XSK_UMEM dead code, from Jan.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds missing information about feature-subcommand in
bpftool.rst
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
An ipvlan bug fix in 'net' conflicted with the abstraction away
of the IPV6 specific support in 'net-next'.
Similarly, a bug fix for mlx5 in 'net' conflicted with the flow
action conversion in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-01-29
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Teach verifier dead code removal, this also allows for optimizing /
removing conditional branches around dead code and to shrink the
resulting image. Code store constrained architectures like nfp would
have hard time doing this at JIT level, from Jakub.
2) Add JMP32 instructions to BPF ISA in order to allow for optimizing
code generation for 32-bit sub-registers. Evaluation shows that this
can result in code reduction of ~5-20% compared to 64 bit-only code
generation. Also add implementation for most JITs, from Jiong.
3) Add support for __int128 types in BTF which is also needed for
vmlinux's BTF conversion to work, from Yonghong.
4) Add a new command to bpftool in order to dump a list of BPF-related
parameters from the system or for a specific network device e.g. in
terms of available prog/map types or helper functions, from Quentin.
5) Add AF_XDP sock_diag interface for querying sockets from user
space which provides information about the RX/TX/fill/completion
rings, umem, memory usage etc, from Björn.
6) Add skb context access for skb_shared_info->gso_segs field, from Eric.
7) Add support for testing flow dissector BPF programs by extending
existing BPF_PROG_TEST_RUN infrastructure, from Stanislav.
8) Split BPF kselftest's test_verifier into various subgroups of tests
in order better deal with merge conflicts in this area, from Jakub.
9) Add support for queue/stack manipulations in bpftool, from Stanislav.
10) Document BTF, from Yonghong.
11) Dump supported ELF section names in libbpf on program load
failure, from Taeung.
12) Silence a false positive compiler warning in verifier's BTF
handling, from Peter.
13) Fix help string in bpftool's feature probing, from Prashant.
14) Remove duplicate includes in BPF kselftests, from Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When prog array is updated with bpftool users often refer
to the map via the ID. Unfortunately, that's likely
to lead to confusion because prog arrays get flushed when
the last user reference is gone. If there is no other
reference bpftool will create one, update successfully
just to close the map again and have it flushed.
Warn about this case in non-JSON mode.
If the problem continues causing confusion we can remove
the support for referring to a map by ID for prog array
update completely. For now it seems like the potential
inconvenience to users who know what they're doing outweighs
the benefit.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Prog arrays don't have 'owner_prog_type' and 'owner_jited'
fields in their fdinfo when they are created. Those fields
are set and reported when first program is checked for
compatibility by bpf_prog_array_compatible().
This means that bpftool cannot expect the fields to always
be there. Currently trying to show maps on a system with
an un-owned prog array leads to a crash:
$ bpftool map show
389: prog_array name tail_call_map flags 0x0
Error: key 'owner_prog_type' not found in fdinfo
Error: key 'owner_jited' not found in fdinfo
key 4B value 4B max_entries 4 memlock 4096B
Segmentation fault (core dumped)
We pass a NULL pointer to atoi().
Remove the assumption that fdinfo keys are always present.
Add missing validations and remove the p_err() calls which
may lead to broken JSON output as caller will not propagate
the failure.
Fixes: 99a44bef58 ("tools: bpftool: add owner_prog_type and owner_jited to bpftool output")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The cfg code need to be aware of the new JMP32 instruction class so it
could partition functions correctly.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When 'bpftool feature' is executed it shows incorrect help string.
test# bpftool feature
Usage: bpftool bpftool probe [COMPONENT] [macros [prefix PREFIX]]
bpftool bpftool help
COMPONENT := { kernel | dev NAME }
Instead of fixing the help text by tweaking argv[] indices, this
patch changes the default action to 'probe'. It makes the behavior
consistent with other subcommands, where first subcommand without
extra parameter results in 'show' action.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We need to let users check their wrong ELF section name with proper
ELF section names when they fail to get a prog/attach type from it.
Because users can't realize libbpf guess prog/attach types from given
ELF section names. For example, when a 'cgroup' section name of a
BPF program is used, show available ELF section names(types).
Before:
$ bpftool prog load bpf-prog.o /sys/fs/bpf/prog1
Error: failed to guess program type based on ELF section name cgroup
After:
libbpf: failed to guess program type based on ELF section name 'cgroup'
libbpf: supported section(type) names are: socket kprobe/ kretprobe/ classifier action tracepoint/ raw_tracepoint/ xdp perf_event lwt_in lwt_out lwt_xmit lwt_seg6local cgroup_skb/ingress cgroup_skb/egress cgroup/skb cgroup/sock cgroup/post_bind4 cgroup/post_bind6 cgroup/dev sockops sk_skb/stream_parser sk_skb/stream_verdict sk_skb sk_msg lirc_mode2 flow_dissector cgroup/bind4 cgroup/bind6 cgroup/connect4 cgroup/connect6 cgroup/sendmsg4 cgroup/sendmsg6
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Andrey Ignatov <rdna@fb.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When updating a percpu map, bpftool currently copies the provided
value only into the first per CPU copy of the specified value,
all others instances are left zeroed.
This change explicitly copies the user-provided bytes to all the
per CPU instances, keeping the sub-command syntax unchanged.
v2 -> v3:
- drop unused argument, as per Quentin's suggestion
v1 -> v2:
- rename the helper as per Quentin's suggestion
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Lance reported an issue with bpftool not being able to
dump program if there are more programs loaded and you
want to dump any but the first program, like:
# bpftool prog
28: kprobe name trace_req_start tag 1dfc28ba8b3dd597 gpl
loaded_at 2019-01-18T17:02:40+1100 uid 0
xlated 112B jited 109B memlock 4096B map_ids 13
29: kprobe name trace_req_compl tag 5b6a5ecc6030a683 gpl
loaded_at 2019-01-18T17:02:40+1100 uid 0
xlated 928B jited 575B memlock 4096B map_ids 13,14
# bpftool prog dum jited tag 1dfc28ba8b3dd597
0: push %rbp
1: mov %rsp,%rbp
...
# bpftool prog dum jited tag 5b6a5ecc6030a683
Error: can't get prog info (29): Bad address
The problem is in the prog_fd_by_tag function not cleaning
the struct bpf_prog_info before another request, so the
previous program length is still in there and kernel assumes
it needs to dump the program, which fails because there's no
user pointer set.
Moving the struct bpf_prog_info declaration into the loop,
so it gets cleaned before each query.
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Reported-by: Lance Digby <ldigby@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add the bash completion related to the newly introduced "bpftool feature
probe" command.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpftool gained support for probing the current system in order to see
what program and map types, and what helpers are available on that
system. This patch adds the possibility to pass an interface index to
libbpf (and hence to the kernel) when trying to load the programs or to
create the maps, in order to see what items a given network device can
support.
A new keyword "dev <ifname>" can be used as an alternative to "kernel"
to indicate that the given device should be tested. If no target ("dev"
or "kernel") is specified bpftool defaults to probing the kernel.
Sample output:
# bpftool -p feature probe dev lo
{
"syscall_config": {
"have_bpf_syscall": true
},
"program_types": {
"have_sched_cls_prog_type": false,
"have_xdp_prog_type": false
},
...
}
As the target is a network device, /proc/ parameters and kernel
configuration are NOT dumped. Availability of the bpf() syscall is
still probed, so we can return early if that syscall is not usable
(since there is no point in attempting the remaining probes in this
case).
Among the program types, only the ones that can be offloaded are probed.
All map types are probed, as there is no specific rule telling which one
could or could not be supported by a device in the future. All helpers
are probed (but only for offload-able program types).
Caveat: as bpftool does not attempt to attach programs to the device at
the moment, probes do not entirely reflect what the device accepts:
typically, for Netronome's nfp, results will announce that TC cls
offload is available even if support has been deactivated (with e.g.
ethtool -K eth1 hw-tc-offload off).
v2:
- All helpers are probed, whereas previous version would only probe the
ones compatible with an offload-able program type. This is because we
do not keep a default compatible program type for each helper anymore.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make bpftool able to dump a subset of the parameters collected by
probing the system as a listing of C-style #define macros, so that
external projects can reuse the result of this probing and build
BPF-based project in accordance with the features available on the
system.
The new "macros" keyword is used to select this output. An additional
"prefix" keyword is added so that users can select a custom prefix for
macro names, in order to avoid any namespace conflict.
Sample output:
# bpftool feature probe kernel macros prefix FOO_
/*** System call availability ***/
#define FOO_HAVE_BPF_SYSCALL
/*** eBPF program types ***/
#define FOO_HAVE_SOCKET_FILTER_PROG_TYPE
#define FOO_HAVE_KPROBE_PROG_TYPE
#define FOO_HAVE_SCHED_CLS_PROG_TYPE
...
/*** eBPF map types ***/
#define FOO_HAVE_HASH_MAP_TYPE
#define FOO_HAVE_ARRAY_MAP_TYPE
#define FOO_HAVE_PROG_ARRAY_MAP_TYPE
...
/*** eBPF helper functions ***/
/*
* Use FOO_HAVE_PROG_TYPE_HELPER(prog_type_name, helper_name)
* to determine if <helper_name> is available for <prog_type_name>,
* e.g.
* #if FOO_HAVE_PROG_TYPE_HELPER(xdp, bpf_redirect)
* // do stuff with this helper
* #elif
* // use a workaround
* #endif
*/
#define FOO_HAVE_PROG_TYPE_HELPER(prog_type, helper) \
FOO_BPF__PROG_TYPE_ ## prog_type ## __HELPER_ ## helper
...
#define FOO_BPF__PROG_TYPE_socket_filter__HELPER_bpf_probe_read 0
#define FOO_BPF__PROG_TYPE_socket_filter__HELPER_bpf_ktime_get_ns 1
#define FOO_BPF__PROG_TYPE_socket_filter__HELPER_bpf_trace_printk 1
...
v3:
- Change output for helpers again: add a
HAVE_PROG_TYPE_HELPER(type, helper) macro that can be used to tell
if <helper> is available for program <type>.
v2:
- #define-based output added as a distinct patch.
- "HAVE_" prefix appended to macro names.
- Output limited to bpf() syscall availability, BPF prog and map types,
helper functions. In this version kernel config options, procfs
parameter or kernel version are intentionally left aside.
- Following the change on helper probes, format for helper probes in
this output style has changed (now a list of compatible program
types).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similarly to what was done for program types and map types, add a set of
probes to test the availability of the different eBPF helper functions
on the current system.
For each known program type, all known helpers are tested, in order to
establish a compatibility matrix. Output is provided as a set of lists
of available helpers, one per program type.
Sample output:
# bpftool feature probe kernel
...
Scanning eBPF helper functions...
eBPF helpers supported for program type socket_filter:
- bpf_map_lookup_elem
- bpf_map_update_elem
- bpf_map_delete_elem
...
eBPF helpers supported for program type kprobe:
- bpf_map_lookup_elem
- bpf_map_update_elem
- bpf_map_delete_elem
...
# bpftool --json --pretty feature probe kernel
{
...
"helpers": {
"socket_filter_available_helpers": ["bpf_map_lookup_elem", \
"bpf_map_update_elem","bpf_map_delete_elem", ...
],
"kprobe_available_helpers": ["bpf_map_lookup_elem", \
"bpf_map_update_elem","bpf_map_delete_elem", ...
],
...
}
}
v5:
- In libbpf.map, move global symbol to the new LIBBPF_0.0.2 section.
v4:
- Use "enum bpf_func_id" instead of "__u32" in bpf_probe_helper()
declaration for the type of the argument used to pass the id of
the helper to probe.
- Undef BPF_HELPER_MAKE_ENTRY after using it.
v3:
- Do not pass kernel version from bpftool to libbpf probes (kernel
version for testing program with kprobes is retrieved directly from
libbpf).
- Dump one list of available helpers per program type (instead of one
list of compatible program types per helper).
v2:
- Move probes from bpftool to libbpf.
- Test all program types for each helper, print a list of working prog
types for each helper.
- Fall back on include/uapi/linux/bpf.h for names and ids of helpers.
- Remove C-style macros output from this patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add new probes for eBPF map types, to detect what are the ones available
on the system. Try creating one map of each type, and see if the kernel
complains.
Sample output:
# bpftool feature probe kernel
...
Scanning eBPF map types...
eBPF map_type hash is available
eBPF map_type array is available
eBPF map_type prog_array is available
...
# bpftool --json --pretty feature probe kernel
{
...
"map_types": {
"have_hash_map_type": true,
"have_array_map_type": true,
"have_prog_array_map_type": true,
...
}
}
v5:
- In libbpf.map, move global symbol to the new LIBBPF_0.0.2 section.
v3:
- Use a switch with all enum values for setting specific map parameters,
so that gcc complains at compile time (-Wswitch-enum) if new map types
were added to the kernel but libbpf was not updated.
v2:
- Move probes from bpftool to libbpf.
- Remove C-style macros output from this patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce probes for supported BPF program types in libbpf, and call it
from bpftool to test what types are available on the system. The probe
simply consists in loading a very basic program of that type and see if
the verifier complains or not.
Sample output:
# bpftool feature probe kernel
...
Scanning eBPF program types...
eBPF program_type socket_filter is available
eBPF program_type kprobe is available
eBPF program_type sched_cls is available
...
# bpftool --json --pretty feature probe kernel
{
...
"program_types": {
"have_socket_filter_prog_type": true,
"have_kprobe_prog_type": true,
"have_sched_cls_prog_type": true,
...
}
}
v5:
- In libbpf.map, move global symbol to a new LIBBPF_0.0.2 section.
- Rename (non-API function) prog_load() as probe_load().
v3:
- Get kernel version for checking kprobes availability from libbpf
instead of from bpftool. Do not pass kernel_version as an argument
when calling libbpf probes.
- Use a switch with all enum values for setting specific program
parameters just before probing, so that gcc complains at compile time
(-Wswitch-enum) if new prog types were added to the kernel but libbpf
was not updated.
- Add a comment in libbpf.h about setrlimit() usage to allow many
consecutive probe attempts.
v2:
- Move probes from bpftool to libbpf.
- Remove C-style macros output from this patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add probes to dump a number of options set (or not set) for compiling
the kernel image. These parameters provide information about what BPF
components should be available on the system. A number of them are not
directly related to eBPF, but are in fact used in the kernel as
conditions on which to compile, or not to compile, some of the eBPF
helper functions.
Sample output:
# bpftool feature probe kernel
Scanning system configuration...
...
CONFIG_BPF is set to y
CONFIG_BPF_SYSCALL is set to y
CONFIG_HAVE_EBPF_JIT is set to y
...
# bpftool --pretty --json feature probe kernel
{
"system_config": {
...
"CONFIG_BPF": "y",
"CONFIG_BPF_SYSCALL": "y",
"CONFIG_HAVE_EBPF_JIT": "y",
...
}
}
v5:
- Declare options[] array in probe_kernel_image_config() as static.
v4:
- Add some options to the list:
- CONFIG_TRACING
- CONFIG_KPROBE_EVENTS
- CONFIG_UPROBE_EVENTS
- CONFIG_FTRACE_SYSCALLS
- Add comments about those options in the source code.
v3:
- Add a comment about /proc/config.gz not being supported as a path for
the config file at this time.
- Use p_info() instead of p_err() on failure to get options from config
file, as bpftool keeps probing other parameters and that would
possibly create duplicate "error" entries for JSON.
v2:
- Remove C-style macros output from this patch.
- NOT addressed: grouping of those config options into subsections
(I don't see an easy way of grouping them at the moment, please see
also the discussion on v1 thread).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
