As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h.
This removes 1 of a few remaining Qualcomm-specific headers into a more
approciate subdirectory under include/.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com
The Qualcomm display driver installs a translation domain once it has
mapped a framebuffer. Use the identity domain for this device on
SC8280XP as well, to avoid faults from EFI FB accessing the framebuffer
while this is being set up.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230113041104.4189152-1-quic_bjorande@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Add the SM8150 DPU compatible to clients compatible list, as it also
needs the workarounds.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov<dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221212121054.193059-1-konrad.dybcio@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The iommu core calls the driver's detach_dev domain op callback only when
a device is finished assigning to user space and
iommu_group_release_dma_owner() is called to return the device to the
kernel, where iommu core wants to set the default domain to the device but
the driver didn't provide one.
In other words, if any iommu driver provides default domain support, the
.detach_dev callback will never be called. This removes the detach_dev
callbacks in those IOMMU drivers that support default domain.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev> # apple-dart
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> # sprd
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> # amd
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230110025408.667767-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Similar to SMMUv2, this driver calls iommu_device_unregister() from the
shutdown path, which removes the IOMMU groups with no coordination
whatsoever with their users - shutdown methods are optional in device
drivers. This can lead to NULL pointer dereferences in those drivers'
DMA API calls, or worse.
Instead of calling the full arm_smmu_device_remove() from
arm_smmu_device_shutdown(), let's pick only the relevant function call -
arm_smmu_device_disable() - more or less the reverse of
arm_smmu_device_reset() - and call just that from the shutdown path.
Fixes: 57365a04c9 ("iommu: Move bus setup to IOMMU device registration")
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221215141251.3688780-2-vladimir.oltean@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
Michael Walle says he noticed the following stack trace while performing
a shutdown with "reboot -f". He suggests he got "lucky" and just hit the
correct spot for the reboot while there was a packet transmission in
flight.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 6.1.0-rc5-00088-gf3600ff8e322 #1930
Hardware name: Kontron KBox A-230-LS (DT)
pc : iommu_get_dma_domain+0x14/0x20
lr : iommu_dma_map_page+0x9c/0x254
Call trace:
iommu_get_dma_domain+0x14/0x20
dma_map_page_attrs+0x1ec/0x250
enetc_start_xmit+0x14c/0x10b0
enetc_xmit+0x60/0xdc
dev_hard_start_xmit+0xb8/0x210
sch_direct_xmit+0x11c/0x420
__dev_queue_xmit+0x354/0xb20
ip6_finish_output2+0x280/0x5b0
__ip6_finish_output+0x15c/0x270
ip6_output+0x78/0x15c
NF_HOOK.constprop.0+0x50/0xd0
mld_sendpack+0x1bc/0x320
mld_ifc_work+0x1d8/0x4dc
process_one_work+0x1e8/0x460
worker_thread+0x178/0x534
kthread+0xe0/0xe4
ret_from_fork+0x10/0x20
Code: d503201f f9416800 d503233f d50323bf (f9404c00)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
This appears to be reproducible when the board has a fixed IP address,
is ping flooded from another host, and "reboot -f" is used.
The following is one more manifestation of the issue:
$ reboot -f
kvm: exiting hardware virtualization
cfg80211: failed to load regulatory.db
arm-smmu 5000000.iommu: disabling translation
sdhci-esdhc 2140000.mmc: Removing from iommu group 11
sdhci-esdhc 2150000.mmc: Removing from iommu group 12
fsl-edma 22c0000.dma-controller: Removing from iommu group 17
dwc3 3100000.usb: Removing from iommu group 9
dwc3 3110000.usb: Removing from iommu group 10
ahci-qoriq 3200000.sata: Removing from iommu group 2
fsl-qdma 8380000.dma-controller: Removing from iommu group 20
platform f080000.display: Removing from iommu group 0
etnaviv-gpu f0c0000.gpu: Removing from iommu group 1
etnaviv etnaviv: Removing from iommu group 1
caam_jr 8010000.jr: Removing from iommu group 13
caam_jr 8020000.jr: Removing from iommu group 14
caam_jr 8030000.jr: Removing from iommu group 15
caam_jr 8040000.jr: Removing from iommu group 16
fsl_enetc 0000:00:00.0: Removing from iommu group 4
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000
fsl_enetc 0000:00:00.1: Removing from iommu group 5
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000
fsl_enetc 0000:00:00.2: Removing from iommu group 6
fsl_enetc_mdio 0000:00:00.3: Removing from iommu group 8
mscc_felix 0000:00:00.5: Removing from iommu group 3
fsl_enetc 0000:00:00.6: Removing from iommu group 7
pcieport 0001:00:00.0: Removing from iommu group 18
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000
pcieport 0002:00:00.0: Removing from iommu group 19
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
pc : iommu_get_dma_domain+0x14/0x20
lr : iommu_dma_unmap_page+0x38/0xe0
Call trace:
iommu_get_dma_domain+0x14/0x20
dma_unmap_page_attrs+0x38/0x1d0
enetc_unmap_tx_buff.isra.0+0x6c/0x80
enetc_poll+0x170/0x910
__napi_poll+0x40/0x1e0
net_rx_action+0x164/0x37c
__do_softirq+0x128/0x368
run_ksoftirqd+0x68/0x90
smpboot_thread_fn+0x14c/0x190
Code: d503201f f9416800 d503233f d50323bf (f9405400)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
The problem seems to be that iommu_group_remove_device() is allowed to
run with no coordination whatsoever with the shutdown procedure of the
enetc PCI device. In fact, it almost seems as if it implies that the
pci_driver :: shutdown() method is mandatory if DMA is used with an
IOMMU, otherwise this is inevitable. That was never the case; shutdown
methods are optional in device drivers.
This is the call stack that leads to iommu_group_remove_device() during
reboot:
kernel_restart
-> device_shutdown
-> platform_shutdown
-> arm_smmu_device_shutdown
-> arm_smmu_device_remove
-> iommu_device_unregister
-> bus_for_each_dev
-> remove_iommu_group
-> iommu_release_device
-> iommu_group_remove_device
I don't know much about the arm_smmu driver, but
arm_smmu_device_shutdown() invoking arm_smmu_device_remove() looks
suspicious, since it causes the IOMMU device to unregister and that's
where everything starts to unravel. It forces all other devices which
depend on IOMMU groups to also point their ->shutdown() to ->remove(),
which will make reboot slower overall.
There are 2 moments relevant to this behavior. First was commit
b06c076ea9 ("Revert "iommu/arm-smmu: Make arm-smmu explicitly
non-modular"") when arm_smmu_device_shutdown() was made to run the exact
same thing as arm_smmu_device_remove(). Prior to that, there was no
iommu_device_unregister() call in arm_smmu_device_shutdown(). However,
that was benign until commit 57365a04c9 ("iommu: Move bus setup to
IOMMU device registration"), which made iommu_device_unregister() call
remove_iommu_group().
Restore the old shutdown behavior by making remove() call shutdown(),
but shutdown() does not call the remove() specific bits.
Fixes: 57365a04c9 ("iommu: Move bus setup to IOMMU device registration")
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221215141251.3688780-1-vladimir.oltean@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
Although it's vanishingly unlikely that anyone would integrate an SMMU
within a coherent interconnect without also making the pagetable walk
interface coherent, the same effect happens if a coherent SMMU fails to
advertise CTTW correctly. This turns out to be the case on some popular
NXP SoCs, where VFIO started failing the IOMMU_CAP_CACHE_COHERENCY test,
even though IOMMU_CACHE *was* previously achieving the desired effect
anyway thanks to the underlying integration.
While those SoCs stand to gain some more general benefits from a
firmware update to override CTTW correctly in DT/ACPI, it's also easy
to work around this in Linux as well, to avoid imposing too much on
affected users - since the upstream client devices *are* correctly
marked as coherent, we can trivially infer their coherent paths through
the SMMU as well.
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: df198b37e7 ("iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY better")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/d6dc41952961e5c7b21acac08a8bf1eb0f69e124.1671123115.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
- Report a warning if we fail to disable the MMU-500 prefetcher
- Usual mass of devicetree binding additions
- Qualcomm SMMU refactoring and generic "qcom,smmu-500" addition
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmN70ScQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNGwLB/9X44O2PAhfE3nyZjGLZmtXKORhb/QWeTgj
u05S1a486MdVaqhcZtv7pirZzAc2JoIYfwSRKqXtFIgbS0Rk03J5ktNAIZ6KSxjF
RIzUMzIKo4ph0mcL1PZpDSO67Vc1WC2N5Vw6tZqO2XkesQGjudaGyRBZjUtKWGlQ
11xW9NnrGuw7G7dC4SYbv6O/kkg1FJoplmx9Nd+8indYomHp1NAk3aRUhKULws3K
dgYitABUyZ+37MDFK+8fJaIaWxiTxiYRLqEPsF2wlbczQYk9EcfzgkKrNf8Xw5hJ
1E6vypG5ZqxjIhSEyv/8vf6xTakG1EsC85fkQZw32AJjFG0WVGuU
=gKok
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
Arm SMMU updates for 6.2
- Report a warning if we fail to disable the MMU-500 prefetcher
- Usual mass of devicetree binding additions
- Qualcomm SMMU refactoring and generic "qcom,smmu-500" addition
SMMUv2 DT binding additions, including a generic Qualcomm compatible
string ("qcom,smmu-500") which will hopefully spell the end for
pointless SoC-specific additions in future.
* for-joerg/arm-smmu/bindings:
iommu/arm-smmu-qcom: Add SM6350 SMMUv2
dt-bindings: arm-smmu: Add SM6350 GPU SMMUv2
iommu/arm-smmu-qcom: Add generic qcom,smmu-500 match entry
iommu/arm-smmu-qcom: Stop using mmu500 reset for v2 MMUs
iommu/arm-smmu-qcom: Merge table from arm-smmu-qcom-debug into match data
iommu/arm-smmu-qcom: provide separate implementation for SDM845-smmu-500
iommu/arm-smmu-qcom: Move the qcom,adreno-smmu check into qcom_smmu_create
iommu/arm-smmu-qcom: Move implementation data into match data
dt-bindings: arm-smmu: Add generic qcom,smmu-500 bindings
dt-bindings: arm-smmu: add special case for Google Cheza platform
dt-bindings: arm-smmu: fix clocks/clock-names schema
dt-bindings: arm-smmu: Add missing Qualcomm SMMU compatibles
dt-bindings: iommu: arm-smmu: add sdm670 compatible
iommu/arm-smmu-qcom: Add SM6115 support
dt-bindings: arm-smmu: Add compatible for Qualcomm SM6115
drivers: arm-smmu-impl: Add QDU1000 and QRU1000 iommu implementation
dt-bindings: arm-smmu: Add 'compatible' for QDU1000 and QRU1000
Default reset value of secure banked register SMMU_sACR.cache_lock is 1.
If it is not been set to 0 by secure software(eg: atf), the non-secure
linux cannot clear ARM_MMU500_ACTLR_CPRE bit. In this situation,
the prefetcher errata is not applied successfully, warn once.
Signed-off-by: Chen Lin <chen45464546@163.com>
Link: https://lore.kernel.org/r/20221103222121.3051-1-chen45464546@163.com
[will: Tweaked wording of diagnostic]
Signed-off-by: Will Deacon <will@kernel.org>
Add generic qcom,smmu-500 compatibility string. Newer platforms should
use this generic entry rather than declaring per-SoC entries.
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-11-dmitry.baryshkov@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The arm_mmu500_reset() writes into registers specific for MMU500. For
the generic ARM SMMU v2 these registers (sACR) are defined as
'implementation defined'. Downstream Qualcomm driver for SMMUv2 doesn't
touch them.
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-10-dmitry.baryshkov@linaro.org
[will: Remove unused 'qcom_smmu_data' stucture]
Signed-off-by: Will Deacon <will@kernel.org>
There is little point in having a separate match table in
arm-smmu-qcom-debug.c. Merge it into the main match data table in
arm-smmu-qcom.c
Note, this also enables debug support for qdu1000, sm6115, sm6375 and
ACPI-based sc8180x systems, since these SoCs are expected to support
tlb_sync debug.
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-9-dmitry.baryshkov@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
There is only one platform, which needs special care in the reset
function, the SDM845. Add special handler for sdm845 and drop the
qcom_smmu500_reset() function.
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-8-dmitry.baryshkov@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Move special handling of qcom,adreno-smmu into qcom_smmu_create()
function. This allows us to further customize the Adreno SMMU
implementation.
Note, this also adds two entries to the qcom_smmu_impl_of_match table.
They were used with the qcom,adreno-smmu compat and were handled by the
removed clause.
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-7-dmitry.baryshkov@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
In preparation to rework of the implementation and configuration
details, make qcom_smmu_create() accept new qcom_smmu_match_data
structure pointer. Make implementation a field in this struct.
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221114170635.1406534-6-dmitry.baryshkov@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Add the Qualcomm SM6115 platform to the list of compatible,
this target uses MMU500 for both APSS and GPU.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20221030094258.486428-6-iskren.chernev@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
This series is to replace the previous EMEDIUMTYPE patch in a VFIO series:
https://lore.kernel.org/kvm/Yxnt9uQTmbqul5lf@8bytes.org/
The purpose is to regulate all existing ->attach_dev callback functions to
use EINVAL exclusively for an incompatibility error between a device and a
domain. This allows VFIO and IOMMUFD to detect such a soft error, and then
try a different domain with the same device.
Among all the patches, the first two are preparatory changes. And then one
patch to update kdocs and another three patches for the enforcement
effort.
Link: https://lore.kernel.org/r/cover.1666042872.git.nicolinc@nvidia.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY2JjUQAKCRCFwuHvBreF
YaFbAP492zvOEaZaRxiK4XcdsU1ZBCovB/2Keh/QIQdb7Ig6hgD/dW7TygTP1+4a
Oqpcu/6aLeHvhayfZt1142S3e0HuHwU=
=g5C+
-----END PGP SIGNATURE-----
Merge tag 'for-joerg' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd into core
iommu: Define EINVAL as device/domain incompatibility
This series is to replace the previous EMEDIUMTYPE patch in a VFIO series:
https://lore.kernel.org/kvm/Yxnt9uQTmbqul5lf@8bytes.org/
The purpose is to regulate all existing ->attach_dev callback functions to
use EINVAL exclusively for an incompatibility error between a device and a
domain. This allows VFIO and IOMMUFD to detect such a soft error, and then
try a different domain with the same device.
Among all the patches, the first two are preparatory changes. And then one
patch to update kdocs and another three patches for the enforcement
effort.
Link: https://lore.kernel.org/r/cover.1666042872.git.nicolinc@nvidia.com
Rename iommu-sva-lib.c[h] to iommu-sva.c[h] as it contains all code
for SVA implementation in iommu core.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-14-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These ops'es have been deprecated. There's no need for them anymore.
Remove them to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-11-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add support for SVA domain allocation and provide an SVA-specific
iommu_domain_ops. This implementation is based on the existing SVA
code. Possible cleanup and refactoring are left for incremental
changes later.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20221031005917.45690-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The current kernel DMA with PASID support is based on the SVA with a flag
SVM_FLAG_SUPERVISOR_MODE. The IOMMU driver binds the kernel memory address
space to a PASID of the device. The device driver programs the device with
kernel virtual address (KVA) for DMA access. There have been security and
functional issues with this approach:
- The lack of IOTLB synchronization upon kernel page table updates.
(vmalloc, module/BPF loading, CONFIG_DEBUG_PAGEALLOC etc.)
- Other than slight more protection, using kernel virtual address (KVA)
has little advantage over physical address. There are also no use
cases yet where DMA engines need kernel virtual addresses for in-kernel
DMA.
This removes SVM_FLAG_SUPERVISOR_MODE support from the IOMMU interface.
The device drivers are suggested to handle kernel DMA with PASID through
the kernel DMA APIs.
The drvdata parameter in iommu_sva_bind_device() and all callbacks is not
needed anymore. Cleanup them as well.
Link: https://lore.kernel.org/linux-iommu/20210511194726.GP1002214@nvidia.com/
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use this field to keep the number of supported PASIDs that an IOMMU
hardware is able to support. This is a generic attribute of an IOMMU
and lifting it into the per-IOMMU device structure makes it possible
to allocate a PASID for device without calls into the IOMMU drivers.
Any iommu driver that supports PASID related features should set this
field before enabling them on the devices.
In the Intel IOMMU driver, intel_iommu_sm is moved to CONFIG_INTEL_IOMMU
enclave so that the pasid_supported() helper could be used in dmar.c
without compilation errors.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Link: https://lore.kernel.org/r/20221031005917.45690-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Following the new rules in include/linux/iommu.h kdocs, update all drivers
->attach_dev callback functions to return EINVAL in the failure paths that
are related to domain incompatibility.
Also, drop adjacent error prints to prevent a kernel log spam.
Link: https://lore.kernel.org/r/f52a07f7320da94afe575c9631340d0019a203a7.1666042873.git.nicolinc@nvidia.com
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add gfp parameter to iommu_alloc_resv_region() for the callers to specify
the memory allocation behavior. Thus iommu_alloc_resv_region() could also
be available in critical contexts.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20220927053109.4053662-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Including:
- Removal of the bus_set_iommu() interface which became
unnecesary because of IOMMU per-device probing
- Make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- Support for AMD IOMMUv2 page-tables for the DMA-API layer. The
v2 page-tables are compatible with the x86 CPU page-tables.
Using them for DMA-API prepares support for hardware-assisted
IOMMU virtualization
- Support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- Some smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=h0sT
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- remove the bus_set_iommu() interface which became unnecesary because
of IOMMU per-device probing
- make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- support for AMD IOMMUv2 page-tables for the DMA-API layer.
The v2 page-tables are compatible with the x86 CPU page-tables. Using
them for DMA-API prepares support for hardware-assisted IOMMU
virtualization
- support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- some smaller fixes and cleanups
* tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
iommu/vt-d: Avoid unnecessary global DMA cache invalidation
iommu/vt-d: Avoid unnecessary global IRTE cache invalidation
iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support
iommu/vt-d: Remove pasid_set_eafe()
iommu/vt-d: Decouple PASID & PRI enabling from SVA
iommu/vt-d: Remove unnecessary SVA data accesses in page fault path
dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names
iommu: dart: Support t6000 variant
iommu/io-pgtable-dart: Add DART PTE support for t6000
iommu/io-pgtable: Add DART subpage protection support
iommu/io-pgtable: Move Apple DART support to its own file
iommu/mediatek: Add support for MT6795 Helio X10 M4Us
iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
dt-bindings: mediatek: Add bindings for MT6795 M4U
iommu/iova: Fix module config properly
iommu/amd: Fix sparse warning
iommu/amd: Remove outdated comment
iommu/amd: Free domain ID after domain_flush_pages
iommu/amd: Free domain id in error path
iommu/virtio: Fix compile error with viommu_capable()
...
Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
For some reason we refer to ID_AA64MMFR0_EL1.ASIDBits as ASID. Add BITS
into the name, bringing the naming into sync with DDI0487H.a. Due to the
large amount of MixedCase in this register which isn't really consistent
with either the kernel style or the majority of the architecture the use of
upper case is preserved. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-10-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Normally we include the full register name in the defines for fields within
registers but this has not been followed for ID registers. In preparation
for automatic generation of defines add the _EL1s into the defines for
ID_AA64MMFR0_EL1 to follow the convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The DMA operations of HiSilicon PTT device can only work properly with
identical mappings. So add a quirk for the device to force the domain
as passthrough.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20220816114414.4092-2-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Clean up the remaining trivial bus_set_iommu() callsites along
with the implementation. Now drivers only have to know and care
about iommu_device instances, phew!
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> # s390
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> # s390
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ea383d5f4d74ffe200ab61248e5de6e95846180a.1660572783.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stop calling bus_set_iommu() since it's now unnecessary. With device
probes now replayed for every IOMMU instance registration, the whole
sorry ordering workaround for legacy DT bindings goes too, hooray!
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/f7aaad3e479a78623a6942ed46937249168b55bd.1660572783.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Assuming that any SMMU can enforce coherency for any device is clearly
nonsense. Although technically even a single SMMU instance can be wired
up to only be capable of emitting coherent traffic for some of the
devices it translates, it's a fairly realistic approximation that if the
SMMU's pagetable walker is wired up to a coherent interconnect then all
its translation units probably are too, and conversely that lack of
coherent table walks implies a non-coherent system in general. Either
way it's still less inaccurate than what we've been claiming so far.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/106c9741415f0b6358c72d53ae9c78c553a2b45c.1660574547.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With all callers now converted to the device-specific version, retire
the old bus-based interface, and give drivers the chance to indicate
accurate per-instance capabilities.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/d8bd8777d06929ad8f49df7fc80e1b9af32a41b5.1660574547.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In qcom_iommu_has_secure_context(), we should call of_node_put()
for the reference 'child' when breaking out of for_each_child_of_node()
which will automatically increase and decrease the refcount.
Fixes: d051f28c88 ("iommu/qcom: Initialize secure page table")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220719124955.1242171-1-windhl@126.com
Signed-off-by: Will Deacon <will@kernel.org>
Fold the arm_smmu_dev_has_feature arm_smmu_dev_feature_enabled into
the main methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220708080616.238833-5-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All drivers that implement get_resv_regions just use
generic_put_resv_regions to implement the put side. Remove the
indirections and document the allocations constraints.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220708080616.238833-4-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This method is never actually called.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220708080616.238833-2-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
TLB sync timeouts can be due to various reasons such as TBU power down
or pending TCU/TBU invalidation/sync and so on. Debugging these often
require dumping of some implementation defined registers to know the
status of TBU/TCU operations and some of these registers are not
accessible in non-secure world such as from kernel and requires SMC
calls to read them in the secure world. So, add this debug support
to dump implementation defined registers for TLB sync timeout issues.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220708094230.4349-1-quic_saipraka@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
