Without that fix connector-analog-tv driver isn't probed when compiled
as module.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Following commands:
modprobe ixgbe
ifconfig ethX up
ethtool -s ethX advertise 0x020
can lead to "setup link failed with code -14" error due to the setup_link
call racing with the SFP detection routine in the watchdog.
This patch resolves this issue by protecting the setup_link call with check
for __IXGBE_IN_SFP_INIT.
Reported-by: Scott Harrison <scoharr2@cisco.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Martin Zhang <martinbj2008@gmail.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Incoming packet is dropped silently by sk_filter(), if the skb was
allocated from pfmemalloc reserves and the corresponding socket is
not marked with the SOCK_MEMALLOC flag.
Igb driver allocates pages for DMA with __skb_alloc_page(), which
calls alloc_pages_node() with the __GFP_MEMALLOC flag. So, in case
of OOM condition, igb can get pages with pfmemalloc flag set.
If an incoming packet hits the pfmemalloc page and is large enough
(small packets are copying into the memory, allocated with
netdev_alloc_skb_ip_align(), so they are not affected), it will be
dropped.
This behavior is ok under high memory pressure, but the problem is
that the igb driver reuses these mapped pages. So, packets are still
dropping even if all memory issues are gone and there is a plenty
of free memory.
In my case, some TCP sessions hang on a small percentage (< 0.1%)
of machines days after OOMs.
Fix this by avoiding reuse of such pages.
Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Tested-by: Aaron Brown "aaron.f.brown@intel.com"
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
VMWare's e1000 implementation does not seem to support unicast filtering.
This can be observed by configuring a macvlan interface on eth0 in a VM in
VMWare Fusion 5.0.5, and trying to use that interface instead of eth0.
Tested on 3.16.
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Pull two RCU fixes from Paul E. McKenney:
" - Complete the work of commit dd56af42bd (rcu: Eliminate deadlock
between CPU hotplug and expedited grace periods), which was
intended to allow synchronize_sched_expedited() to be safely
used when holding locks acquired by CPU-hotplug notifiers.
This commit makes the put_online_cpus() avoid the deadlock
instead of just handling the get_online_cpus().
- Complete the work of commit 35ce7f29a4 (rcu: Create rcuo
kthreads only for onlined CPUs), which was intended to allow
RCU to avoid allocating unneeded kthreads on systems where the
firmware says that there are more CPUs than are really present.
This commit makes rcu_barrier() aware of the mismatch, so that
it doesn't hang waiting for non-existent CPUs. "
Signed-off-by: Ingo Molnar <mingo@kernel.org>
User visible:
* Fix report -F (abort, in_tx, mispredict, etc) segfaults for sample.data files
without branch info (Jiri Olsa)
* Add patch that should have went in a previous patchkit to use global cache
provided by libunwind (Namhyung Kim)
* Make CPUINFO_PROC an array to support different kernels, problem
detected when the information reported via /proc/cpuinfo changed on ARM (Wang Nan)
* 'perf probe' --demangle typo fix and a new --quiet option (Masami Hiramatsu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUUOC5AAoJEBpxZoYYoA71wRYH/A5DhJq50X4KhHAr/RLcEn3T
HNFUGrQKChuczZ11JM9dZiCHN8TXTdG2ql71SFXzAQ96TP7LwWVcHlAQQV7CIwQM
jGFwSqPrDK2pD8EhQoOEChobGpNDAUPZclUUwCdw22cvoig0xdfjQjpNehAsxyzI
jgl6wb6hF/lHuoYXFxijrV3RbGcnNVUCHnjyhKD6WTplq3EvT16hsLFaM9t/r/p/
wL7wB5Sz8IUUSCWaq63u39spGwy+qH+bgZ9fyaccxCMhBPQ5+Eo9moHIfnjwuxbP
d8l7pDnCMXGiaMO1Jt3BH1C3mQr3HNFCxxrgQOOLM9VVmxi5WPcmu945tC354uw=
=Klbg
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix report -F (abort, in_tx, mispredict, etc) segfaults for sample.data files
without branch info (Jiri Olsa)
- Add patch that should have went in a previous patchkit to use global cache
provided by libunwind (Namhyung Kim)
- Make CPUINFO_PROC an array to support different kernels, problem
detected when the information reported via /proc/cpuinfo changed on ARM (Wang Nan)
- 'perf probe' --demangle typo fix and a new --quiet option (Masami Hiramatsu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After '#echo mem > /sys/power/state' some devices can not be properly resumed
because apparently the MTD Partition Configuration Register has been reset
to default thus the rootfs cannot be mounted cleanly on resume.
An example of this can be found in the SA-1100 Developer's Manual at 9.5.3.3
where the second step of the Sleep Shutdown Sequence is described:
"An internal reset is applied to the SA-1100. All units are reset...".
As workaround we refresh the PCR value as done initially on chip setup.
This behavior and the fix are confirmed by our tests done on 2 different Zaurus
collie units with kernel 3.17.
Fixes: 812c5fa82b: ("mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR")
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Cc: <stable@vger.kernel.org> # 3.16+
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Since commit 6d178ef2fd ("mtd: nand: Move ELM driver and rename as
omap_elm"), I don't have any mtd devices present on my am335x. This
changes the link order of the omap_elm and omap2 objects, causing them
to probe in the wrong order.
To fix this, make elm_config defer probing until the omap_elm driver is
actually loaded.
Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Merge misc fixes from Andrew Morton:
"21 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits)
mm/balloon_compaction: fix deflation when compaction is disabled
sh: fix sh770x SCIF memory regions
zram: avoid NULL pointer access in concurrent situation
mm/slab_common: don't check for duplicate cache names
ocfs2: fix d_splice_alias() return code checking
mm: rmap: split out page_remove_file_rmap()
mm: memcontrol: fix missed end-writeback page accounting
mm: page-writeback: inline account_page_dirtied() into single caller
lib/bitmap.c: fix undefined shift in __bitmap_shift_{left|right}()
drivers/rtc/rtc-bq32k.c: fix register value
memory-hotplug: clear pgdat which is allocated by bootmem in try_offline_node()
drivers/rtc/rtc-s3c.c: fix initialization failure without rtc source clock
kernel/kmod: fix use-after-free of the sub_info structure
drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc
mm, thp: fix collapsing of hugepages on madvise
drivers: of: add return value to of_reserved_mem_device_init()
mm: free compound page with correct order
gcov: add ARM64 to GCOV_PROFILE_ALL
fsnotify: next_i is freed during fsnotify_unmount_inodes.
mm/compaction.c: avoid premature range skip in isolate_migratepages_range
...
If CONFIG_BALLOON_COMPACTION=n balloon_page_insert() does not link pages
with balloon and doesn't set PagePrivate flag, as a result
balloon_page_dequeue() cannot get any pages because it thinks that all
of them are isolated. Without balloon compaction nobody can isolate
ballooned pages. It's safe to remove this check.
Fixes: d6d86c0a7f ("mm/balloon_compaction: redesign ballooned pages management").
Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Reported-by: Matt Mullins <mmullins@mmlx.us>
Cc: <stable@vger.kernel.org> [3.17]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Resources scif1_resources & scif2_resources overlap. Actual SCIF region
size is 0x10.
This is regression from commit d850acf975 ("sh: Declare SCIF register
base and IRQ as resources")
Signed-off-by: Andriy Skulysh <askulysh@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a rare NULL pointer bug in mem_used_total_show() and
mem_used_max_store() in concurrent situation, like this:
zram is not initialized, process A is a mem_used_total reader which runs
periodically, while process B try to init zram.
process A process B
access meta, get a NULL value
init zram, done
init_done() is true
access meta->mem_pool, get a NULL pointer BUG
This patch fixes this issue.
Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The SLUB cache merges caches with the same size and alignment and there
was long standing bug with this behavior:
- create the cache named "foo"
- create the cache named "bar" (which is merged with "foo")
- delete the cache named "foo" (but it stays allocated because "bar"
uses it)
- create the cache named "foo" again - it fails because the name "foo"
is already used
That bug was fixed in commit 694617474e ("slab_common: fix the check
for duplicate slab names") by not warning on duplicate cache names when
the SLUB subsystem is used.
Recently, cache merging was implemented the with SLAB subsystem too, in
12220dea07 ("mm/slab: support slab merge")). Therefore we need stop
checking for duplicate names even for the SLAB subsystem.
This patch fixes the bug by removing the check.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
d_splice_alias() can return a valid dentry, NULL or an ERR_PTR.
Currently the code checks not for ERR_PTR and will cuase an oops in
ocfs2_dentry_attach_lock(). Fix this by using IS_ERR_OR_NULL().
Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page_remove_rmap() has too many branches on PageAnon() and is hard to
follow. Move the file part into a separate function.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 0a31bc97c8 ("mm: memcontrol: rewrite uncharge API") changed
page migration to uncharge the old page right away. The page is locked,
unmapped, truncated, and off the LRU, but it could race with writeback
ending, which then doesn't unaccount the page properly:
test_clear_page_writeback() migration
wait_on_page_writeback()
TestClearPageWriteback()
mem_cgroup_migrate()
clear PCG_USED
mem_cgroup_update_page_stat()
if (PageCgroupUsed(pc))
decrease memcg pages under writeback
release pc->mem_cgroup->move_lock
The per-page statistics interface is heavily optimized to avoid a
function call and a lookup_page_cgroup() in the file unmap fast path,
which means it doesn't verify whether a page is still charged before
clearing PageWriteback() and it has to do it in the stat update later.
Rework it so that it looks up the page's memcg once at the beginning of
the transaction and then uses it throughout. The charge will be
verified before clearing PageWriteback() and migration can't uncharge
the page as long as that is still set. The RCU lock will protect the
memcg past uncharge.
As far as losing the optimization goes, the following test results are
from a microbenchmark that maps, faults, and unmaps a 4GB sparse file
three times in a nested fashion, so that there are two negative passes
that don't account but still go through the new transaction overhead.
There is no actual difference:
old: 33.195102545 seconds time elapsed ( +- 0.01% )
new: 33.199231369 seconds time elapsed ( +- 0.03% )
The time spent in page_remove_rmap()'s callees still adds up to the
same, but the time spent in the function itself seems reduced:
# Children Self Command Shared Object Symbol
old: 0.12% 0.11% filemapstress [kernel.kallsyms] [k] page_remove_rmap
new: 0.12% 0.08% filemapstress [kernel.kallsyms] [k] page_remove_rmap
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: <stable@vger.kernel.org> [3.17.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A follow-up patch would have changed the call signature. To save the
trouble, just fold it instead.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: <stable@vger.kernel.org> [3.17.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If __bitmap_shift_left() or __bitmap_shift_right() are asked to shift by
a multiple of BITS_PER_LONG, they will try to shift a long value by
BITS_PER_LONG bits which is undefined. Change the functions to avoid
the undefined shift.
Coverity id: 1192175
Coverity id: 1192174
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix register value in bq32000 trickle charging.
Mike reported that I'm using wrong value in one trickle-charging case,
and after checking docs, I must admit he's right.
Signed-off-by: Pavel Machek <pavel@denx.de>
Reported-by: Mike Bremford <mike@bfo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When hot adding the same memory after hot removal, the following
messages are shown:
WARNING: CPU: 20 PID: 6 at mm/page_alloc.c:4968 free_area_init_node+0x3fe/0x426()
...
Call Trace:
dump_stack+0x46/0x58
warn_slowpath_common+0x81/0xa0
warn_slowpath_null+0x1a/0x20
free_area_init_node+0x3fe/0x426
hotadd_new_pgdat+0x90/0x110
add_memory+0xd4/0x200
acpi_memory_device_add+0x1aa/0x289
acpi_bus_attach+0xfd/0x204
acpi_bus_attach+0x178/0x204
acpi_bus_scan+0x6a/0x90
acpi_device_hotplug+0xe8/0x418
acpi_hotplug_work_fn+0x1f/0x2b
process_one_work+0x14e/0x3f0
worker_thread+0x11b/0x510
kthread+0xe1/0x100
ret_from_fork+0x7c/0xb0
The detaled explanation is as follows:
When hot removing memory, pgdat is set to 0 in try_offline_node(). But
if the pgdat is allocated by bootmem allocator, the clearing step is
skipped.
And when hot adding the same memory, the uninitialized pgdat is reused.
But free_area_init_node() checks wether pgdat is set to zero. As a
result, free_area_init_node() hits WARN_ON().
This patch clears pgdat which is allocated by bootmem allocator in
try_offline_node().
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Zhang Zhen <zhenzhang.zhang@huawei.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix unconditional initialization failure on non-exynos3250 SoCs.
Commit df9e26d093 ("rtc: s3c: add support for RTC of Exynos3250 SoC")
introduced rtc source clock support, but also added initialization
failure on SoCs, which doesn't need such clock.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Found this in the message log on a s390 system:
BUG kmalloc-192 (Not tainted): Poison overwritten
Disabling lock debugging due to kernel taint
INFO: 0x00000000684761f4-0x00000000684761f7. First byte 0xff instead of 0x6b
INFO: Allocated in call_usermodehelper_setup+0x70/0x128 age=71 cpu=2 pid=648
__slab_alloc.isra.47.constprop.56+0x5f6/0x658
kmem_cache_alloc_trace+0x106/0x408
call_usermodehelper_setup+0x70/0x128
call_usermodehelper+0x62/0x90
cgroup_release_agent+0x178/0x1c0
process_one_work+0x36e/0x680
worker_thread+0x2f0/0x4f8
kthread+0x10a/0x120
kernel_thread_starter+0x6/0xc
kernel_thread_starter+0x0/0xc
INFO: Freed in call_usermodehelper_exec+0x110/0x1b8 age=71 cpu=2 pid=648
__slab_free+0x94/0x560
kfree+0x364/0x3e0
call_usermodehelper_exec+0x110/0x1b8
cgroup_release_agent+0x178/0x1c0
process_one_work+0x36e/0x680
worker_thread+0x2f0/0x4f8
kthread+0x10a/0x120
kernel_thread_starter+0x6/0xc
kernel_thread_starter+0x0/0xc
There is a use-after-free bug on the subprocess_info structure allocated
by the user mode helper. In case do_execve() returns with an error
____call_usermodehelper() stores the error code to sub_info->retval, but
sub_info can already have been freed.
Regarding UMH_NO_WAIT, the sub_info structure can be freed by
__call_usermodehelper() before the worker thread returns from
do_execve(), allowing memory corruption when do_execve() failed after
exec_mmap() is called.
Regarding UMH_WAIT_EXEC, the call to umh_complete() allows
call_usermodehelper_exec() to continue which then frees sub_info.
To fix this race the code needs to make sure that the call to
call_usermodehelper_freeinfo() is always done after the last store to
sub_info->retval.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adds support for RTC device inside PM8941 PMIC. The RTC in this PMIC
have two register spaces. Thus the rtc-pm8xxx is slightly reworked to
reflect these differences.
The register set for different PMIC chips are selected on DT compatible
string base.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: simplify and fix locking in pm8xxx_rtc_set_time()]
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Josh Cartwright <joshc@codeaurora.org>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If an anonymous mapping is not allowed to fault thp memory and then
madvise(MADV_HUGEPAGE) is used after fault, khugepaged will never
collapse this memory into thp memory.
This occurs because the madvise(2) handler for thp, hugepage_madvise(),
clears VM_NOHUGEPAGE on the stack and it isn't stored in vma->vm_flags
until the final action of madvise_behavior(). This causes the
khugepaged_enter_vma_merge() to be a no-op in hugepage_madvise() when
the vma had previously had VM_NOHUGEPAGE set.
Fix this by passing the correct vma flags to the khugepaged mm slot
handler. There's no chance khugepaged can run on this vma until after
madvise_behavior() returns since we hold mm->mmap_sem.
It would be possible to clear VM_NOHUGEPAGE directly from vma->vm_flags
in hugepage_advise(), but I didn't want to introduce special case
behavior into madvise_behavior(). I think it's best to just let it
always set vma->vm_flags itself.
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Suleiman Souhlal <suleiman@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Driver calling of_reserved_mem_device_init() might be interested if the
initialization has been successful or not, so add support for returning
error code.
This fixes a build warining caused by commit 7bfa5ab6fa ("drivers:
dma-coherent: add initialization from device tree"), which has been
merged without this change and without fixing function return value.
Fixes: 7bfa5ab6fa ("drivers: dma-coherent: add initialization from device tree")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Josh Cartwright <joshc@codeaurora.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Compound page should be freed by put_page() or free_pages() with correct
order. Not doing so will cause tail pages leaked.
The compound order can be obtained by compound_order() or use
HPAGE_PMD_ORDER in our case. Some people would argue the latter is
faster but I prefer the former which is more general.
This bug was observed not just on our servers (the worst case we saw is
11G leaked on a 48G machine) but also on our workstations running Ubuntu
based distro.
$ cat /proc/vmstat | grep thp_zero_page_alloc
thp_zero_page_alloc 55
thp_zero_page_alloc_failed 0
This means there is (thp_zero_page_alloc - 1) * (2M - 4K) memory leaked.
Fixes: 97ae17497e ("thp: implement refcounting for huge zero page")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Bob Liu <lliubbo@gmail.com>
Cc: <stable@vger.kernel.org> [3.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Following up the arm testing of gcov, turns out gcov on ARM64 works fine
as well. Only change needed is adding ARM64 to Kconfig depends.
Tested with qemu and mach-virt
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During file system stress testing on 3.10 and 3.12 based kernels, the
umount command occasionally hung in fsnotify_unmount_inodes in the
section of code:
spin_lock(&inode->i_lock);
if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) {
spin_unlock(&inode->i_lock);
continue;
}
As this section of code holds the global inode_sb_list_lock, eventually
the system hangs trying to acquire the lock.
Multiple crash dumps showed:
The inode->i_state == 0x60 and i_count == 0 and i_sb_list would point
back at itself. As this is not the value of list upon entry to the
function, the kernel never exits the loop.
To help narrow down problem, the call to list_del_init in
inode_sb_list_del was changed to list_del. This poisons the pointers in
the i_sb_list and causes a kernel to panic if it transverse a freed
inode.
Subsequent stress testing paniced in fsnotify_unmount_inodes at the
bottom of the list_for_each_entry_safe loop showing next_i had become
free.
We believe the root cause of the problem is that next_i is being freed
during the window of time that the list_for_each_entry_safe loop
temporarily releases inode_sb_list_lock to call fsnotify and
fsnotify_inode_delete.
The code in fsnotify_unmount_inodes attempts to prevent the freeing of
inode and next_i by calling __iget. However, the code doesn't do the
__iget call on next_i
if i_count == 0 or
if i_state & (I_FREEING | I_WILL_FREE)
The patch addresses this issue by advancing next_i in the above two cases
until we either find a next_i which we can __iget or we reach the end of
the list. This makes the handling of next_i more closely match the
handling of the variable "inode."
The time to reproduce the hang is highly variable (from hours to days.) We
ran the stress test on a 3.10 kernel with the proposed patch for a week
without failure.
During list_for_each_entry_safe, next_i is becoming free causing
the loop to never terminate. Advance next_i in those cases where
__iget is not done.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hp.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Ken Helias <kenhelias@firemail.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit edc2ca6124 ("mm, compaction: move pageblock checks up from
isolate_migratepages_range()") commonizes isolate_migratepages variants
and make them use isolate_migratepages_block().
isolate_migratepages_block() could stop the execution when enough pages
are isolated, but, there is no code in isolate_migratepages_range() to
handle this case. In the result, even if isolate_migratepages_block()
returns prematurely without checking all pages in the range,
isolate_migratepages_block() is called repeately on the following
pageblock and some pages in the previous range are skipped to check.
Then, CMA is failed frequently due to this fact.
To fix this problem, this patch let isolate_migratepages_range() know
the situation that enough pages are isolated and stop the isolation in
that case.
Note that isolate_migratepages() has no such problem, because, it always
stops the isolation after just one call of isolate_migratepages_block().
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit ff7ee93f47 ("cgroup/kmemleak: Annotate alloc_page() for cgroup
allocations") introduces kmemleak_alloc() for alloc_page_cgroup(), but
corresponding kmemleak_free() is missing, which makes kmemleak be
wrongly disabled after memory offlining. Log is pasted at the end of
this commit message.
This patch add kmemleak_free() into free_page_cgroup(). During page
offlining, this patch removes corresponding entries in kmemleak rbtree.
After that, the freed memory can be allocated again by other subsystems
without killing kmemleak.
bash # for x in 1 2 3 4; do echo offline > /sys/devices/system/memory/memory$x/state ; sleep 1; done ; dmesg | grep leak
Offlined Pages 32768
kmemleak: Cannot insert 0xffff880016969000 into the object search tree (overlaps existing)
CPU: 0 PID: 412 Comm: sleep Not tainted 3.17.0-rc5+ #86
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x46/0x58
create_object+0x266/0x2c0
kmemleak_alloc+0x26/0x50
kmem_cache_alloc+0xd3/0x160
__sigqueue_alloc+0x49/0xd0
__send_signal+0xcb/0x410
send_signal+0x45/0x90
__group_send_sig_info+0x13/0x20
do_notify_parent+0x1bb/0x260
do_exit+0x767/0xa40
do_group_exit+0x44/0xa0
SyS_exit_group+0x17/0x20
system_call_fastpath+0x16/0x1b
kmemleak: Kernel memory leak detector disabled
kmemleak: Object 0xffff880016900000 (size 524288):
kmemleak: comm "swapper/0", pid 0, jiffies 4294667296
kmemleak: min_count = 0
kmemleak: count = 0
kmemleak: flags = 0x1
kmemleak: checksum = 0
kmemleak: backtrace:
log_early+0x63/0x77
kmemleak_alloc+0x4b/0x50
init_section_page_cgroup+0x7f/0xf5
page_cgroup_init+0xc5/0xd0
start_kernel+0x333/0x408
x86_64_start_reservations+0x2a/0x2c
x86_64_start_kernel+0xf5/0xfc
Fixes: ff7ee93f47 (cgroup/kmemleak: Annotate alloc_page() for cgroup allocations)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org> [3.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The WARN_ON in inet_evict_bucket can be triggered by a valid case:
inet_frag_kill and inet_evict_bucket can be running in parallel on the
same queue which means that there has been at least one more ref added
by a previous inet_frag_find call, but inet_frag_kill can delete the
timer before inet_evict_bucket which will cause the WARN_ON() there to
trigger since we'll have refcnt!=1. Now, this case is valid because the
queue is being "killed" for some reason (removed from the chain list and
its timer deleted) so it will get destroyed in the end by one of the
inet_frag_put() calls which reaches 0 i.e. refcnt is still valid.
CC: Florian Westphal <fw@strlen.de>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Patrick McLean <chutzpah@gentoo.org>
Fixes: b13d3cbfb8 ("inet: frag: move eviction of queues to work queue")
Reported-by: Patrick McLean <chutzpah@gentoo.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the evictor is running it adds some chosen frags to a local list to
be evicted once the chain lock has been released but at the same time
the *frag_queue can be running for some of the same queues and it
may call inet_frag_kill which will wait on the chain lock and
will then delete the queue from the wrong list since it was added in the
eviction one. The fix is simple - check if the queue has the evict flag
set under the chain lock before deleting it, this is safe because the
evict flag is set only under that lock and having the flag set also means
that the queue has been detached from the chain list, so no need to delete
it again.
An important note to make is that we're safe w.r.t refcnt because
inet_frag_kill and inet_evict_bucket will sync on the del_timer operation
where only one of the two can succeed (or if the timer is executing -
none of them), the cases are:
1. inet_frag_kill succeeds in del_timer
- then the timer ref is removed, but inet_evict_bucket will not add
this queue to its expire list but will restart eviction in that chain
2. inet_evict_bucket succeeds in del_timer
- then the timer ref is kept until the evictor "expires" the queue, but
inet_frag_kill will remove the initial ref and will set
INET_FRAG_COMPLETE which will make the frag_expire fn just to remove
its ref.
In the end all of the queue users will do an inet_frag_put and the one
that reaches 0 will free it. The refcount balance should be okay.
CC: Florian Westphal <fw@strlen.de>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Patrick McLean <chutzpah@gentoo.org>
Fixes: b13d3cbfb8 ("inet: frag: move eviction of queues to work queue")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Patrick McLean <chutzpah@gentoo.org>
Tested-by: Patrick McLean <chutzpah@gentoo.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Remove the rcu_read_lock/unlock around rcu_access_pointer
2. Replace the rcu_dereference with rcu_access_pointer
Signed-off-by: Tej Parkash <tej.parkash@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull block layer fixes from Jens Axboe:
"A small collection of fixes for the current kernel. This contains:
- Two error handling fixes from Jan Kara. One for null_blk on
failure to add a device, and the other for the block/scsi_ioctl
SCSI_IOCTL_SEND_COMMAND fixing up the error jump point.
- A commit added in the merge window for the bio integrity bits
unfortunately disabled merging for all requests if
CONFIG_BLK_DEV_INTEGRITY wasn't set. Reverse the logic, so that
integrity checking wont disallow merges when not enabled.
- A fix from Ming Lei for merging and generating too many segments.
This caused a BUG in virtio_blk.
- Two error handling printk() fixups from Robert Elliott, improving
the information given when we rate limit.
- Error handling fixup on elevator_init() failure from Sudip
Mukherjee.
- A fix from Tony Battersby, fixing up a memory leak in the
scatterlist handling with scsi-mq"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: Fix merge logic when CONFIG_BLK_DEV_INTEGRITY is not defined
lib/scatterlist: fix memory leak with scsi-mq
block: fix wrong error return in elevator_init()
scsi: Fix error handling in SCSI_IOCTL_SEND_COMMAND
null_blk: Cleanup error recovery in null_add_dev()
blk-merge: recaculate segment if it isn't less than max segments
fs: clarify rate limit suppressed buffer I/O errors
fs: merge I/O error prints into one line
Pull HID fixes from Jiri Kosina:
- workarounds for a couple of misbehaving Elan Touchscreens, by Adel
Gadllah
- fix for TransducerSerialNumber field implementation, by Jason Gerecke
- a couple of new HID usages (added by HUT), by Olivier Gay
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: input: Fix TransducerSerialNumber implementation
HID: add keyboard input assist hid usages
HID: usbhid: enable always-poll quirk for Elan Touchscreen 016f
HID: usbhid: enable always-poll quirk for Elan Touchscreen 009b
Replaced repetive Device ID's which got added in commit b961f9a488
("cxgb4vf: Remove superfluous "idx" parameter of CH_DEVICE() macro")
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull Integrity subsystem fix from James Morris:
"These changes fix a bug in xattr handling, where the evm and ima
inode_setxattr() functions do not check for empty xattrs being passed
from userspace (leading to user-triggerable null pointer
dereferences)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
evm: check xattr value length and type in evm_inode_setxattr()
ima: check xattr value length and type in the ima_inode_setxattr()
NetworkManager might want to know that it changed when the router advertisement
arrives.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Vijay Subramanian <vijaynsu@cisco.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Pull powerpc updates from Michael Ellerman:
"There's some bug fixes or cleanups to facilitate fixes, a MAINTAINERS
update, and a new syscall (bpf)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
powerpc/numa: ensure per-cpu NUMA mappings are correct on topology update
powerpc/numa: use cached value of update->cpu in update_cpu_topology
cxl: Fix PSL error due to duplicate segment table entries
powerpc/mm: Use appropriate ESID mask in copro_calculate_slb()
cxl: Refactor cxl_load_segment() and find_free_sste()
cxl: Disable secondary hash in segment table
Revert "powerpc/powernv: Fix endian bug in LPC bus debugfs accessors"
powernv: Use _GLOBAL_TOC for opal wrappers
powerpc: Wire up sys_bpf() syscall
MAINTAINERS: nx-842 driver maintainer change
powerpc/mm: Remove redundant #if case
powerpc/mm: Fix build error with hugetlfs disabled
Since CONFIG_HIGHMEM got enabled on ARMv5 Kirkwood, we have noticed a
very significant drop in networking performance. The test were
conducted on an OpenBlocks A7 board. Without this patch, the outgoing
performance measured with iperf are:
- highmem OFF, TSO OFF 544 Mbit/s
- highmem OFF, TSO ON 942 Mbit/s
- highmem ON, TSO OFF 306 Mbit/s
- highmem ON, TSO ON 246 Mbit/s
On this Kirkwood platform, the L2 cache is a Feroceon cache, and with
this cache, all the range operations have to be done on virtual
addresses and not physical addresses. Therefore, whenever
CONFIG_HIGHMEM is enabled, the cache maintenance operations call
kmap_atomic_pfn() and kunmap_atomic().
However, kmap_atomic_pfn() does not implement the same fast path for
non-highmem pages as the one implemented in kmap_atomic(), and this is
one of the reason for the performance drop. While this patch does not
fully restore the performances, it clearly improves them a lot:
without patch with patch
- highmem ON, TSO OFF 306 Mbit/s 387 Mbit/s
- highmem ON, TSO ON 246 Mbit/s 434 Mbit/s
We're still far from the !CONFIG_HIGHMEM performances, but it does
improve a bit the situation.
Thanks a lot to Ezequiel Garcia and Gregory Clement for all the
testing work around this topic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King suggested [1]:
"I'd ask for one change. Please make all these messages start with
"L2C-310 OF" not "PL310 OF:". The device is described in ARM
documentation as a L2C-310 not PL310. (Also note the : is dropped
too - most of the other messages don't have the : either.)
The:
"PL310 OF: cache setting yield illegal associativity
PL310 OF: -1073346556 calculated, only 8 and 16 legal"
message could also be changed to something like:
"L2C-310 OF cache associativity %d invalid, only 8 or 16 permittedn"
[1] http://www.spinics.net/lists/arm-kernel/msg372776.html
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 513510ddba
(common: dma-mapping: introduce common remapping functions)
managed to end up with an extra return statement from the
original patch. Drop it.
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
These updates remove two allocations of unused buffers from kobil_sct
and add some new device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=PSiW
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v3.18-rc3
These updates remove two allocations of unused buffers from kobil_sct
and add some new device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
The calculation of "num_shader_engines" has a precedence bug because
the right shift happens before the mask, but this variable is never used
so we can just delete it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For boards without a reset GPIO we skip the delay between enabling the
pcie_ref_clk and touching the RC registers for configuration. This hangs
the system if there isn't a proper delay to ensure the clocks are settled
in the DW PCIe core.
Also iMX6Q always needs an additional 10us delay to make sure the reset is
propagated through the core, as we don't have an explicitly controlled
reset input on this SoC.
This fixes a problem with 3fce0e882f ("PCI: imx6: Delay enabling
reference clock for SS until it stabilizes"): the kernel doesn't boot on
systems that don't pass the PCI GPIO reset in the DTB. This regression
affects mx6 nitrogen boards.
[bhelgaas: add regression info in changelog]
Fixes: 3fce0e882f ("PCI: imx6: Delay enabling reference clock for SS until it stabilizes")
Reported-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Richard Zhu <richard.zhu@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
It is reported that Samsung laptops that need to poll events are broken by
the following commit:
Commit 3afcf2ece4
Subject: ACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't set
The behaviors of the 2 vendor firmwares are conflict:
1. Acer: OSPM shouldn't issue QR_EC unless SCI_EVT is set, firmware
automatically sets SCI_EVT as long as there is event queued up.
2. Samsung: OSPM should issue QR_EC whatever SCI_EVT is set, firmware
returns 0 when there is no event queued up.
This patch is a quick fix to distinguish the behaviors to make Acer
behavior only effective for Acer EC firmware so that the breakages on
Samsung EC firmware can be avoided.
Fixes: 3afcf2ece4 (ACPI / EC: Add support to disallow QR_EC to be issued ...)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161
Reported-and-tested-by: Ortwin Glück <odi@odi.ch>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 3.17+ <stable@vger.kernel.org> # 3.17+
[ rjw : Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that the following commit breaks Samsung hardware:
Commit: 558e4736f2.
Subject: ACPI / EC: Add support to disallow QR_EC to be issued before
completing previous QR_EC
Which means the Samsung behavior conflicts with the Acer behavior.
1. Samsung may behave like:
[ +event 1 ] SCI_EVT set
[ +event 2 ] SCI_EVT set
write QR_EC
read event
[ -event 1 ] SCI_EVT clear
Without the above commit, Samsung can work:
[ +event 1 ] SCI_EVT set
[ +event 2 ] SCI_EVT set
write QR_EC
CAN prepare next QR_EC as SCI_EVT=1
read event
[ -event 1 ] SCI_EVT clear
write QR_EC
read event
[ -event 2 ] SCI_EVT clear
With the above commit, Samsung cannot work:
[ +event 1 ] SCI_EVT set
[ +event 2 ] SCI_EVT set
write QR_EC
read event
[ -event 1 ] SCI_EVT clear
CANNOT prepare next QR_EC as SCI_EVT=0
2. Acer may behave like:
[ +event 1 ] SCI_EVT set
[ +event 2 ]
write QR_EC
read event
[ -event 1 ] SCI_EVT clear
[ +event 2 ] SCI_EVT set
Without the above commit, Acer cannot work when there is only 1 event:
[ +event 1 ] SCI_EVT set
write QR_EC
can prepared next QR_EC as SCI_EVT=1
read event
[ -event 1 ] SCI_EVT clear
CANNOT write QR_EC as SCI_EVT=0
With the above commit, Acer can work:
[ +event 1 ] SCI_EVT set
[ +event 2 ]
write QR_EC
read event
[ -event 1 ] SCI_EVT set
can prepare next QR_EC because SCI_EVT=0
CAN write QR_EC as SCI_EVT=1
Since Acer can also work with only the following commit applied:
Commit: 3afcf2ece4
Subject: ACPI / EC: Add support to disallow QR_EC to be issued when
SCI_EVT isn't set
commit 558e4736f2 can be reverted.
Fixes: 558e4736f2 (ACPI / EC: Add support to disallow QR_EC to be issued ...)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161
Reported-and-tested-by: Ortwin Glück <odi@odi.ch>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 3.17+ <stable@vger.kernel.org> # 3.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
