mirror of
https://github.com/torvalds/linux.git
synced 2024-09-21 07:23:06 +00:00
58824fa008
192 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Namhyung Kim
|
58824fa008 |
perf annotate: Add --insn-stat option for debugging
This is for a debugging purpose. It'd be useful to see per-instrucion
level success/failure stats.
$ perf annotate --data-type --insn-stat
Annotate Instruction stats
total 264, ok 143 (54.2%), bad 121 (45.8%)
Name : Good Bad
-----------------------------------------------------------
movq : 45 31
movl : 22 11
popq : 0 19
cmpl : 16 3
addq : 8 7
cmpq : 11 3
cmpxchgl : 3 7
cmpxchgq : 8 0
incl : 3 3
movzbl : 4 2
incq : 4 2
decl : 6 0
...
Committer notes:
So these are about being able to find the type for accesses from these
instructions, we should improve the naming, but it is for debugging, we
can improve this later:
@@ -3726,6 +3759,10 @@ struct annotated_data_type *hist_entry__get_data_type(struct hist_entry *he)
continue;
mem_type = find_data_type(ms, ip, op_loc->reg, op_loc->offset);
+ if (mem_type)
+ istat->good++;
+ else
+ istat->bad++;
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-18-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
67bc54bbc5 |
perf annotate: Implement hist_entry__get_data_type()
It's the function to find out the type info from the given sample data
and will be called from the hist_entry sort logic when 'type' sort key
is used.
It first calls objdump to disassemble the instructions and figure out
information about memory access at the location. Maybe we can do it
better by analyzing the instruction directly, but I'll leave it for
later work.
The memory access is determined by checking instruction operands to
have "(" and then extract register name and offset. It'll return NULL
if no data type is found.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
3a0c26edc3 |
perf annotate: Add annotate_get_insn_location()
The annotate_get_insn_location() is to get the detailed information of instruction locations like registers and offset. It has source and target operands locations in an array. Each operand can have a register and an offset. The offset is meaningful when mem_ref flag is set. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: linux-toolchains@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Link: https://lore.kernel.org/r/20231213001323.718046-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
0669729eb0 |
perf annotate: Factor out evsel__get_arch()
The evsel__get_arch() is to get architecture info from the environment. It'll be used by other places later so let's factor it out. Also add arch__is() to check the arch info by name. Committer notes: "get" is usually associated with refcounting, so we better rename this at some point to a better name. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: linux-toolchains@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Link: https://lore.kernel.org/r/20231213001323.718046-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
327f7533cc |
perf annotate: Get rid of local annotation options
It doesn't need the option in the struct annotation which is allocated for each symbol. It can directly use the global options and save 8 bytes per symbol. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231128175441.721579-9-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
2fa21d694c |
perf annotate: Remove remaining usages of local annotation options
So that it can get rid of the unused data. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231128175441.721579-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
7f929aea21 |
perf annotate: Ensure init/exit for global options
Now it only cares about the global options so it can just handle it without the argument. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231128175441.721579-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
22197fb296 |
perf ui/browser/annotate: Use global annotation_options
Now it can use the global options and no need save local browser options separately. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231128175441.721579-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
41fd3cacd2 |
perf annotate: Use global annotation_options
Now it can directly use the global options and no need to pass it as an argument. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231128175441.721579-5-namhyung@kernel.org [ Fixup build with GTK2=1 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
9d03194a36 |
perf annotate: Introduce global annotation_options
The annotation options are to control the behavior of objdump and the output. It's basically used by 'perf annotate' but 'perf report' and 'perf top' can call it on TUI dynamically. But it doesn't need to have a copy of annotation options in many places. As most of the work is done in the util/annotate.c file, add a global variable and set/use it instead of having their own copies. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231128175441.721579-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
08973307d2 |
perf annotate: Check if operand has multiple regs
It needs to check all possible information in an instruction. Let's add
a field indicating if the operand has multiple registers. I'll be used
to search type information like in an array access on x86 like:
mov 0x10(%rax,%rbx,8), %rcx
-------------
here
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231012035111.676789-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
fb7fd2a14a |
perf annotate: Move raw_comment and raw_func_start fields out of 'struct ins_operands'
Thoese two fields are used only for the jump_ops, so move them into the union to save some bytes. Also add jump__delete() callback not to free the fields as they didn't allocate new strings. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: WANG Rui <wangrui@loongson.cn> Cc: linux-toolchains@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Link: https://lore.kernel.org/r/20231110000012.3538610-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
b753d48f53 |
perf annotate: Move offsets array from 'struct annotation' to 'struct annotated_source'
The offsets array keeps pointers to 'struct annotation_line' entries which are available in the 'struct annotated_source'. Let's move it to there. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231103191907.54531-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
0aae4c99c5 |
perf annotate: Move some source code related fields from 'struct annotation' to 'struct annotated_source'
Some fields in the 'struct annotation' are only used with 'struct annotated_source' so better to be moved there in order to reduce memory consumption for other symbols. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231103191907.54531-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
2b215ec71b |
perf annotate: Move max_coverage from 'struct annotation' to 'struct annotated_branch'
The max_coverage field is only used when branch stack info is available so it'd be natural to move to 'struct annotated_branch'. Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231103191907.54531-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
b7f87e3259 |
perf annotate: Split branch stack cycles info from 'struct annotation'
The cycles info is only meaningful when sample has branch stacks. To save the memory for normal cases, move those fields to a new 'struct annotated_branch' and dynamically allocate it when needed. Also move cycles_hist from annotated_source as it's related here. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231103191907.54531-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
de2c7eb59c |
perf annotate: Split branch stack cycles information out of 'struct annotation_line'
The cycles info is used only when branch stack is provided. Separate them from 'struct annotation_line' into a separate struct and lazy allocate them to save some memory. Committer notes: Make annotation__compute_ipc() check if the lazy allocation works, bailing out if so, its callers already do error checking and propagation. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231103191907.54531-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Ian Rogers
|
2e9f9d4a72 |
perf annotation: Switch lock from a mutex to a sharded_mutex
Remove the "struct mutex lock" variable from annotation that is allocated per symbol. This removes in the region of 40 bytes per symbol allocation. Use a sharded mutex where the number of shards is set to the number of CPUs. Assuming good hashing of the annotation (done based on the pointer), this means in order to contend there needs to be more threads than CPUs, which is not currently true in any perf command. Were contention an issue it is straightforward to increase the number of shards in the mutex. On my Debian/glibc based machine, this reduces the size of struct annotation from 136 bytes to 96 bytes, or nearly 30%. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andres Freund <andres@anarazel.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Yuan Can <yuancan@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Link: https://lore.kernel.org/r/20230615040715.2064350-2-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Ian Rogers
|
56d9117c50 |
perf annotate: Own objdump_path and disassembler_style strings
Make struct annotation_options own the strings objdump_path and disassembler_style, freeing them on exit. Add missing strdup for disassembler_style when read from a config file. Committer notes: Converted free(obj->member) to zfree(&obj->member) in annotation_options__exit() Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andres Freund <andres@anarazel.de> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Tom Rix <trix@redhat.com> Cc: llvm@lists.linux.dev Link: https://lore.kernel.org/r/20230328235543.1082207-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
217b7d41ea |
perf annotate: Add init/exit to annotation_options remove default
The annotation__default_options global variable was used to initialize annotation_options. Switch to the init/exit pattern as later changes will give ownership over strings and this will be necessary to avoid memory leaks. Committer note: Fix the GTK2=1 build, hist_entry__gtk_annotate() needs to receive a 'struct annotation_options' pointer. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andres Freund <andres@anarazel.de> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Tom Rix <trix@redhat.com> Cc: llvm@lists.linux.dev Link: https://lore.kernel.org/r/20230328235543.1082207-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
7d18a824b5 |
perf annotate: Toggle full address <-> offset display
Handle 'f' key to toggle the display offset and full address. Obviously
it only works when users set to see disassembler output ('o' key). It'd
be useful when users want to see the full virtual address in the TUI
annotate browser.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220923173142.805896-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Ian Rogers
|
9b3726ef83 |
perf annotate: Update use of pthread mutex
Switch to the use of mutex wrappers that provide better error checking. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Truong <alexandre.truong@arm.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andres Freund <andres@anarazel.de> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: André Almeida <andrealmeid@igalia.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Colin Ian King <colin.king@intel.com> Cc: Dario Petrillo <dario.pk1@gmail.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Fangrui Song <maskray@google.com> Cc: Hewenliang <hewenliang4@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jason Wang <wangborong@cdjrlc.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Pavithra Gurushankar <gpavithrasha@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Tom Rix <trix@redhat.com> Cc: Weiguo Li <liwg06@foxmail.com> Cc: Wenyu Liu <liuwenyu7@huawei.com> Cc: William Cohen <wcohen@redhat.com> Cc: Zechuan Chen <chenzechuan1@huawei.com> Cc: bpf@vger.kernel.org Cc: llvm@lists.linux.dev Cc: yaowenbin <yaowenbin1@huawei.com> Link: https://lore.kernel.org/r/20220826164242.43412-13-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
4f74f18789 |
perf symbols: Factor out annotation init/exit
The exit function fixes a memory leak with the src field as detected by
leak sanitizer. An example of which is:
Indirect leak of 25133184 byte(s) in 207 object(s) allocated from:
#0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803
#2 0x55defe6397e4 in symbol__hists util/annotate.c:952
#3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968
#4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119
#5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182
#6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236
#7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315
#8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473
#9 0x55defe731e38 in machines__deliver_event util/session.c:1510
#10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590
#11 0x55defe72951e in ordered_events__deliver_event util/session.c:183
#12 0x55defe740082 in do_flush util/ordered-events.c:244
#13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323
#14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341
#15 0x55defe73837f in __perf_session__process_events util/session.c:2390
#16 0x55defe7385ff in perf_session__process_events util/session.c:2420
...
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211112035124.94327-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Martin Liska
|
2777b81b37 |
perf annotate: Show full source location with 'l' hotkey
Right now, when Line numbers are displayed, one can't easily find a source file that the line corresponds to. When a source line is selected and 'l' is pressed, full source file location is displayed in perf UI footer line. The hotkey works only for source code lines. Signed-off-by: Martin Liška <mliska@suse.cz> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lore.kernel.org/lkml/25a6384f-d862-5dda-4fec-8f0555599c75@suse.cz Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Martin Liška
|
1f0e6edcd9 |
perf annotate: Fix jump parsing for C++ code.
Considering the following testcase:
int
foo(int a, int b)
{
for (unsigned i = 0; i < 1000000000; i++)
a += b;
return a;
}
int main()
{
foo (3, 4);
return 0;
}
'perf annotate' displays:
86.52 │40055e: → ja 40056c <foo(int, int)+0x26>
13.37 │400560: mov -0x18(%rbp),%eax
│400563: add %eax,-0x14(%rbp)
│400566: addl $0x1,-0x4(%rbp)
0.11 │40056a: → jmp 400557 <foo(int, int)+0x11>
│40056c: mov -0x14(%rbp),%eax
│40056f: pop %rbp
and the 'ja 40056c' does not link to the location in the function. It's
caused by fact that comma is wrongly parsed, it's part of function
signature.
With my patch I see:
86.52 │ ┌──ja 26
13.37 │ │ mov -0x18(%rbp),%eax
│ │ add %eax,-0x14(%rbp)
│ │ addl $0x1,-0x4(%rbp)
0.11 │ │↑ jmp 11
│26:└─→mov -0x14(%rbp),%eax
and 'o' output prints:
86.52 │4005┌── ↓ ja 40056c <foo(int, int)+0x26>
13.37 │4005│0: mov -0x18(%rbp),%eax
│4005│3: add %eax,-0x14(%rbp)
│4005│6: addl $0x1,-0x4(%rbp)
0.11 │4005│a: ↑ jmp 400557 <foo(int, int)+0x11>
│4005└─→ mov -0x14(%rbp),%eax
On the contrary, compiling the very same file with gcc -x c, the parsing
is fine because function arguments are not displayed:
jmp 400543 <foo+0x1d>
Committer testing:
Before:
$ cat cpp_args_annotate.c
int
foo(int a, int b)
{
for (unsigned i = 0; i < 1000000000; i++)
a += b;
return a;
}
int main()
{
foo (3, 4);
return 0;
}
$ gcc --version |& head -1
gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9)
$ gcc -g cpp_args_annotate.c -o cpp_args_annotate
$ perf record ./cpp_args_annotate
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.275 MB perf.data (7188 samples) ]
$ perf annotate --stdio2 foo
Samples: 7K of event 'cycles:u', 4000 Hz, Event count (approx.): 7468429289, [percent: local period]
foo() /home/acme/c/cpp_args_annotate
Percent
0000000000401106 <foo>:
foo():
int
foo(int a, int b)
{
push %rbp
mov %rsp,%rbp
mov %edi,-0x14(%rbp)
mov %esi,-0x18(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
movl $0x0,-0x4(%rbp)
↓ jmp 1d
a += b;
13.45 13: mov -0x18(%rbp),%eax
add %eax,-0x14(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
addl $0x1,-0x4(%rbp)
0.09 1d: cmpl $0x3b9ac9ff,-0x4(%rbp)
86.46 ↑ jbe 13
return a;
mov -0x14(%rbp),%eax
}
pop %rbp
← retq
$
I.e. works for C, now lets switch to C++:
$ g++ -g cpp_args_annotate.c -o cpp_args_annotate
$ perf record ./cpp_args_annotate
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.268 MB perf.data (6976 samples) ]
$ perf annotate --stdio2 foo
Samples: 6K of event 'cycles:u', 4000 Hz, Event count (approx.): 7380681761, [percent: local period]
foo() /home/acme/c/cpp_args_annotate
Percent
0000000000401106 <foo(int, int)>:
foo(int, int):
int
foo(int a, int b)
{
push %rbp
mov %rsp,%rbp
mov %edi,-0x14(%rbp)
mov %esi,-0x18(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
movl $0x0,-0x4(%rbp)
cmpl $0x3b9ac9ff,-0x4(%rbp)
86.53 → ja 40112c <foo(int, int)+0x26>
a += b;
13.32 mov -0x18(%rbp),%eax
0.00 add %eax,-0x14(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
addl $0x1,-0x4(%rbp)
0.15 → jmp 401117 <foo(int, int)+0x11>
return a;
mov -0x14(%rbp),%eax
}
pop %rbp
← retq
$
Reproduced.
Now with this patch:
Reusing the C++ built binary, as we can see here:
$ readelf -wi cpp_args_annotate | grep producer
<c> DW_AT_producer : (indirect string, offset: 0x2e): GNU C++14 10.2.1 20201125 (Red Hat 10.2.1-9) -mtune=generic -march=x86-64 -g
$
And furthermore:
$ file cpp_args_annotate
cpp_args_annotate: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=4fe3cab260204765605ec630d0dc7a7e93c361a9, for GNU/Linux 3.2.0, with debug_info, not stripped
$ perf buildid-list -i cpp_args_annotate
4fe3cab260204765605ec630d0dc7a7e93c361a9
$ perf buildid-list | grep cpp_args_annotate
4fe3cab260204765605ec630d0dc7a7e93c361a9 /home/acme/c/cpp_args_annotate
$
It now works:
$ perf annotate --stdio2 foo
Samples: 6K of event 'cycles:u', 4000 Hz, Event count (approx.): 7380681761, [percent: local period]
foo() /home/acme/c/cpp_args_annotate
Percent
0000000000401106 <foo(int, int)>:
foo(int, int):
int
foo(int a, int b)
{
push %rbp
mov %rsp,%rbp
mov %edi,-0x14(%rbp)
mov %esi,-0x18(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
movl $0x0,-0x4(%rbp)
11: cmpl $0x3b9ac9ff,-0x4(%rbp)
86.53 ↓ ja 26
a += b;
13.32 mov -0x18(%rbp),%eax
0.00 add %eax,-0x14(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
addl $0x1,-0x4(%rbp)
0.15 ↑ jmp 11
return a;
26: mov -0x14(%rbp),%eax
}
pop %rbp
← retq
$
Signed-off-by: Martin Liška <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Link: http://lore.kernel.org/lkml/13e1a405-edf9-e4c2-4327-a9b454353730@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Gustavo A. R. Silva
|
6549a8c0c3 |
perf tools: Replace zero-length array with flexible-array
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array
member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by this
change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit
|
||
Jin Yao
|
7b0a0dcb64 |
perf report: Support interactive annotation of code without symbols
For perf report on stripped binaries it is currently impossible to do
annotation. The annotation state is all tied to symbols, but there are
either no symbols, or symbols are not covering all the code.
We should support the annotation functionality even without symbols.
This patch fakes a symbol and the symbol name is the string of address.
After that, we just follow current annotation working flow.
For example,
1. perf report
Overhead Command Shared Object Symbol
20.67% div libc-2.27.so [.] __random_r
17.29% div libc-2.27.so [.] __random
10.59% div div [.] 0x0000000000000628
9.25% div div [.] 0x0000000000000612
6.11% div div [.] 0x0000000000000645
2. Select the line of "10.59% div div [.] 0x0000000000000628" and ENTER.
Annotate 0x0000000000000628
Zoom into div thread
Zoom into div DSO (use the 'k' hotkey to zoom directly into the kernel)
Browse map details
Run scripts for samples of symbol [0x0000000000000628]
Run scripts for all samples
Switch to another data file in PWD
Exit
3. Select the "Annotate 0x0000000000000628" and ENTER.
Percent│
│
│
│ Disassembly of section .text:
│
│ 0000000000000628 <.text+0x68>:
│ divsd %xmm4,%xmm0
│ divsd %xmm3,%xmm1
│ movsd (%rsp),%xmm2
│ addsd %xmm1,%xmm0
│ addsd %xmm2,%xmm0
│ movsd %xmm0,(%rsp)
Now we can see the dump of object starting from 0x628.
v5:
---
Remove the hotkey 'a' implementation from this patch. It
will be moved to a separate patch.
v4:
---
1. Support the hotkey 'a'. When we press 'a' on address,
now it supports the annotation.
2. Change the patch title from
"Support interactive annotation of code without symbols" to
"perf report: Support interactive annotation of code without symbols"
v3:
---
Keep just the ANNOTATION_DUMMY_LEN, and remove the
opts->annotate_dummy_len since it's the "maybe in future
we will provide" feature.
v2:
---
Fix a crash issue when annotating an address in "unknown" object.
The steps to reproduce this issue:
perf record -e cycles:u ls
perf report
75.29% ls ld-2.27.so [.] do_lookup_x
23.64% ls ld-2.27.so [.] __GI___tunables_init
1.04% ls [unknown] [k] 0xffffffff85c01210
0.03% ls ld-2.27.so [.] _start
When annotating 0xffffffff85c01210, the crash happens.
v2 adds checking for ms->map in add_annotate_opt(). If the object is
"unknown", ms->map is NULL.
Committer notes:
Renamed new_annotate_sym() to symbol__new_unresolved().
Use PRIx64 to fix this issue in some 32-bit arches:
ui/browsers/hists.c: In function 'symbol__new_unresolved':
ui/browsers/hists.c:2474:38: error: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Werror=format=]
snprintf(name, sizeof(name), "%-#.*lx", BITS_PER_LONG / 4, addr);
~~~~~~^ ~~~~
%-#.*llx
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200227043939.4403-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Ravi Bangoria
|
dabce16bd2 |
perf annotate: Get rid of annotation->nr_jumps
The 'nr_jumps' field in 'struct annotation' is not used since it's
inception in commit
|
||
|
Ravi Bangoria
|
2316f861ae |
perf annotate: Simplify disasm_line allocation and freeing code
We are allocating disasm_line object in annotation_line__new() instead of disasm_line__new(). Similarly annotation_line__delete() is actually freeing disasm_line object as well. This complexity is because of privsize. But we don't need privsize anymore so get rid of privsize and simplify disasm_line allocation and freeing code. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20200204045233.474937-3-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ravi Bangoria
|
e0ad4d6854 |
perf annotate: Remove privsize from symbol__annotate() args
privsize is passed as 0 from all the symbol__annotate() callers. Remove it from argument list. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20200204045233.474937-2-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ravi Bangoria
|
7384083ba6 |
perf annotate: Make perf config effective
perf default config set by user in [annotate] section is totally ignored
by annotate code. Fix it.
Before:
$ ./perf config
annotate.hide_src_code=true
annotate.show_nr_jumps=true
annotate.show_nr_samples=true
$ ./perf annotate shash
│ unsigned h = 0;
│ movl $0x0,-0xc(%rbp)
│ while (*s)
│ ↓ jmp 44
│ h = 65599 * h + *s++;
11.33 │24: mov -0xc(%rbp),%eax
43.50 │ imul $0x1003f,%eax,%ecx
│ mov -0x18(%rbp),%rax
After:
│ movl $0x0,-0xc(%rbp)
│ ↓ jmp 44
1 │1 24: mov -0xc(%rbp),%eax
4 │ imul $0x1003f,%eax,%ecx
│ mov -0x18(%rbp),%rax
Note that we have removed show_nr_samples and show_total_period from
annotation_options because they are not used. Instead of them we use
symbol_conf.show_nr_samples and symbol_conf.show_total_period.
Committer testing:
Using 'perf annotate --stdio2' to use the TUI rendering but emitting the output to stdio:
# perf config
#
# perf config annotate.hide_src_code=true
# perf config
annotate.hide_src_code=true
#
# perf config annotate.show_nr_jumps=true
# perf config annotate.show_nr_samples=true
# perf config
annotate.hide_src_code=true
annotate.show_nr_jumps=true
annotate.show_nr_samples=true
#
#
Before:
# perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized
Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period]
ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0
Percent
00000000000609f0 <ObjectInstance::weak_pointer_was_finalized()@@Base>:
endbr64
cmpq $0x0,0x20(%rdi)
↓ je 10
xor %eax,%eax
← retq
xchg %ax,%ax
100.00 10: push %rbp
cmpq $0x0,0x18(%rdi)
mov %rdi,%rbp
↓ jne 20
1b: xor %eax,%eax
pop %rbp
← retq
nop
20: lea 0x18(%rdi),%rdi
→ callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject*
cmpq $0x0,0x18(%rbp)
↑ jne 1b
mov %rbp,%rdi
→ callq ObjectBase::jsobj_addr() const@plt
mov $0x1,%eax
pop %rbp
← retq
#
After:
# perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized 2> /dev/null
Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period]
ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0
Samples endbr64
cmpq $0x0,0x20(%rdi)
↓ je 10
xor %eax,%eax
← retq
xchg %ax,%ax
1 1 10: push %rbp
cmpq $0x0,0x18(%rdi)
mov %rdi,%rbp
↓ jne 20
1 1b: xor %eax,%eax
pop %rbp
← retq
nop
1 20: lea 0x18(%rdi),%rdi
→ callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject*
cmpq $0x0,0x18(%rbp)
↑ jne 1b
mov %rbp,%rdi
→ callq ObjectBase::jsobj_addr() const@plt
mov $0x1,%eax
pop %rbp
← retq
#
# perf config annotate.show_nr_jumps
annotate.show_nr_jumps=true
# perf config annotate.show_nr_jumps=false
# perf config annotate.show_nr_jumps
annotate.show_nr_jumps=false
#
# perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized 2> /dev/null
Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period]
ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0
Samples endbr64
cmpq $0x0,0x20(%rdi)
↓ je 10
xor %eax,%eax
← retq
xchg %ax,%ax
1 10: push %rbp
cmpq $0x0,0x18(%rdi)
mov %rdi,%rbp
↓ jne 20
1b: xor %eax,%eax
pop %rbp
← retq
nop
20: lea 0x18(%rdi),%rdi
→ callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject*
cmpq $0x0,0x18(%rbp)
↑ jne 1b
mov %rbp,%rdi
→ callq ObjectBase::jsobj_addr() const@plt
mov $0x1,%eax
pop %rbp
← retq
#
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-6-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Ravi Bangoria
|
68aac855b6 |
perf annotate: Fix --show-total-period for tui/stdio2
perf annotate --show-total-period does not really show total period. The reason is we have two separate variables for the same purpose. One is in symbol_conf.show_total_period and another is annotation_options.show_total_period. We save command line option in symbol_conf.show_total_period but uses annotation_option.show_total_period while rendering tui/stdio2 browser. Though, we copy symbol_conf.show_total_period to annotation__default_options.show_total_period but that is not really effective as we don't use annotation__default_options once we copy default options to dynamic variable annotate.opts in cmd_annotate(). Instead of all these complication, keep only one variable and use it all over. symbol_conf.show_total_period is used by perf report/top as well. So let's kill annotation_options.show_total_period. On a side note, I've kept annotation_options.show_total_period definition because it's still used by perf-config code. Follow up patch to fix perf-config for annotate will remove annotation_options.show_total_period. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-3-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Andi Kleen
|
3b0b16bf8c |
perf tools: Support --prefix/--prefix-strip
The objdump utility has useful --prefix / --prefix-strip options to
allow changing source code file names hardcoded into executables' debug
info. Add options to 'perf report', 'perf top' and 'perf annotate',
which are then passed to objdump.
$ mkdir foo
$ echo 'main() { for (;;); }' > foo/foo.c
$ gcc -g foo/foo.c
foo/foo.c:1:1: warning: return type defaults to ‘int’ [-Wimplicit-int]
1 | main() { for (;;); }
| ^~~~
$ perf record ./a.out
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.230 MB perf.data (5721 samples) ]
$ mv foo bar
$ perf annotate
<does not show source code>
$ perf annotate --prefix=/home/ak/lsrc/git/bar --prefix-strip=5
<does show source code>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 20200107210444.214071-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Arnaldo Carvalho de Melo
|
2975489458 |
perf annotate: Pass a 'map_symbol' in places receiving a pair of 'map' and 'symbol' pointers
We are already passing things like: symbol__annotate(ms->sym, ms->map, ...) So shorten the signature of such functions to receive the 'map_symbol' pointer. This also paves the way to having the 'struct map_groups' pointer in the 'struct map_symbol' so that we can get rid of 'struct map'->groups. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-23yx8v1t41nzpkpi7rdrozww@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jin Yao
|
cebf7d51a6 |
perf diff: Report noisy for cycles diff
This patch prints the stddev and hist for the cycles diff of program block. It can help us to understand if the cycles is noisy or not. This patch is inspired by Andi Kleen's patch: https://lwn.net/Articles/600471/ We create new option '--cycles-hist'. Example: perf record -b ./div perf record -b ./div perf diff -c cycles # Baseline [Program Block Range] Cycles Diff Shared Object Symbol # ........ .......................................................... .... ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 div [.] main 46.72% [div.c:42 -> div.c:44] 0 div [.] main 46.72% [div.c:42 -> div.c:39] 0 div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr When we enable the option '--cycles-hist', the output is perf diff -c cycles --cycles-hist # Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol # ........ .......................................................... .... ................. ................. ............................ # 46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main 46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main 46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main 20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r 20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r 17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random 17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random 17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random 17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random 8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag 8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag 5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand 5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand 2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt 0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax 0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap 0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap 0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15 0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock 0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr v8: --- Rebase to perf/core branch v7: --- 1. v6 got Jiri's ACK. 2. Rebase to latest perf/core branch. v6: --- 1. Jiri provides better code for using data__hpp_register() in ui_init(). Use this code in v6. v5: --- 1. Refine the use of data__hpp_register() in ui_init() according to Jiri's suggestion. v4: --- 1. Rename the new option from '--noisy' to '--cycles-hist' 2. Remove the option '-n'. 3. Only update the spark value and stats when '--cycles-hist' is enabled. 4. Remove the code of printing '..'. v3: --- 1. Move the histogram to a separate column 2. Move the svals[] out of struct stats v2: --- Jiri got a compile error, CC builtin-diff.o builtin-diff.c: In function ‘compute_cycles_diff’: builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value] 712 | labs(pair->block_info->cycles_spark[i] - | ^~~~ Because the result of u64 - u64 is still u64. Now we change the type of cycles_spark[] to s64. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
11aad897f6 |
perf annotate: Don't return -1 for error when doing BPF disassembly
Return errno when open_memstream() fails and add two new speciall error codes for when an invalid, non BPF file or one without BTF is passed to symbol__disassemble_bpf(), so that its callers can rely on symbol__strerror_disassemble() to convert that to a human readable error message that can help figure out what is wrong, with hints even. Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Song Liu <songliubraving@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org>, Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/n/tip-usevw9r2gcipfcrbpaueurw0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
42d7a9107d |
perf annotate: Fix arch specific ->init() failure errors
They are called from symbol__annotate() and to propagate errors that can help understand the problem make them return what symbol__strerror_disassemble() known, i.e. errno codes and other annotation specific errors in a special, out of errnos, range. Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org>, Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/n/tip-pqx7srcv7tixgid251aeboj6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Jiri Olsa
|
6484d2f9dc |
libperf: Add nr_entries to struct perf_evlist
Move nr_entries count from 'struct perf' to into perf_evlist struct. Committer notes: Fix tools/perf/arch/s390/util/auxtrace.c case. And also the comment in tools/perf/util/annotate.h. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-42-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jiri Olsa
|
32dcd021d0 |
perf evsel: Rename struct perf_evsel to struct evsel
Rename struct perf_evsel to struct evsel, so we don't have a name clash when we add struct perf_evsel in libperf. Committer notes: Added fixes for arm64, provided by Jiri. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Song Liu
|
6987561c9e |
perf annotate: Enable annotation of BPF programs
In symbol__disassemble(), DSO_BINARY_TYPE__BPF_PROG_INFO dso calls into
a new function symbol__disassemble_bpf(), where annotation line
information is filled based on the bpf_prog_info and btf data saved in
given perf_env.
symbol__disassemble_bpf() uses binutils's libopcodes to disassemble bpf
programs.
Committer testing:
After fixing this:
- u64 *addrs = (u64 *)(info_linear->info.jited_ksyms);
+ u64 *addrs = (u64 *)(uintptr_t)(info_linear->info.jited_ksyms);
Detected when crossbuilding to a 32-bit arch.
And making all this dependent on HAVE_LIBBFD_SUPPORT and
HAVE_LIBBPF_SUPPORT:
1) Have a BPF program running, one that has BTF info, etc, I used
the tools/perf/examples/bpf/augmented_raw_syscalls.c put in place
by 'perf trace'.
# grep -B1 augmented_raw ~/.perfconfig
[trace]
add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
#
# perf trace -e *mmsg
dnf/6245 sendmmsg(20, 0x7f5485a88030, 2, MSG_NOSIGNAL) = 2
NetworkManager/10055 sendmmsg(22<socket:[1056822]>, 0x7f8126ad1bb0, 2, MSG_NOSIGNAL) = 2
2) Then do a 'perf record' system wide for a while:
# perf record -a
^C[ perf record: Woken up 68 times to write data ]
[ perf record: Captured and wrote 19.427 MB perf.data (366891 samples) ]
#
3) Check that we captured BPF and BTF info in the perf.data file:
# perf report --header-only | grep 'b[pt]f'
# event : name = cycles:ppp, , id = { 294789, 294790, 294791, 294792, 294793, 294794, 294795, 294796 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, ksymbol = 1, bpf_event = 1
# bpf_prog_info of id 13
# bpf_prog_info of id 14
# bpf_prog_info of id 15
# bpf_prog_info of id 16
# bpf_prog_info of id 17
# bpf_prog_info of id 18
# bpf_prog_info of id 21
# bpf_prog_info of id 22
# bpf_prog_info of id 41
# bpf_prog_info of id 42
# btf info of id 2
#
4) Check which programs got recorded:
# perf report | grep bpf_prog | head
0.16% exe bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter
0.14% exe bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
0.08% fuse-overlayfs bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter
0.07% fuse-overlayfs bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
0.01% clang-4.0 bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
0.01% clang-4.0 bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter
0.00% clang bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
0.00% runc bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter
0.00% clang bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter
0.00% sh bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit
#
This was with the default --sort order for 'perf report', which is:
--sort comm,dso,symbol
If we just look for the symbol, for instance:
# perf report --sort symbol | grep bpf_prog | head
0.26% [k] bpf_prog_819967866022f1e1_sys_enter - -
0.24% [k] bpf_prog_c1bd85c092d6e4aa_sys_exit - -
#
or the DSO:
# perf report --sort dso | grep bpf_prog | head
0.26% bpf_prog_819967866022f1e1_sys_enter
0.24% bpf_prog_c1bd85c092d6e4aa_sys_exit
#
We'll see the two BPF programs that augmented_raw_syscalls.o puts in
place, one attached to the raw_syscalls:sys_enter and another to the
raw_syscalls:sys_exit tracepoints, as expected.
Now we can finally do, from the command line, annotation for one of
those two symbols, with the original BPF program source coude intermixed
with the disassembled JITed code:
# perf annotate --stdio2 bpf_prog_819967866022f1e1_sys_enter
Samples: 950 of event 'cycles:ppp', 4000 Hz, Event count (approx.): 553756947, [percent: local period]
bpf_prog_819967866022f1e1_sys_enter() bpf_prog_819967866022f1e1_sys_enter
Percent int sys_enter(struct syscall_enter_args *args)
53.41 push %rbp
0.63 mov %rsp,%rbp
0.31 sub $0x170,%rsp
1.93 sub $0x28,%rbp
7.02 mov %rbx,0x0(%rbp)
3.20 mov %r13,0x8(%rbp)
1.07 mov %r14,0x10(%rbp)
0.61 mov %r15,0x18(%rbp)
0.11 xor %eax,%eax
1.29 mov %rax,0x20(%rbp)
0.11 mov %rdi,%rbx
return bpf_get_current_pid_tgid();
2.02 → callq *ffffffffda6776d9
2.76 mov %eax,-0x148(%rbp)
mov %rbp,%rsi
int sys_enter(struct syscall_enter_args *args)
add $0xfffffffffffffeb8,%rsi
return bpf_map_lookup_elem(pids, &pid) != NULL;
movabs $0xffff975ac2607800,%rdi
1.26 → callq *ffffffffda6789e9
cmp $0x0,%rax
2.43 → je 0
add $0x38,%rax
0.21 xor %r13d,%r13d
if (pid_filter__has(&pids_filtered, getpid()))
0.81 cmp $0x0,%rax
→ jne 0
mov %rbp,%rdi
probe_read(&augmented_args.args, sizeof(augmented_args.args), args);
2.22 add $0xfffffffffffffeb8,%rdi
0.11 mov $0x40,%esi
0.32 mov %rbx,%rdx
2.74 → callq *ffffffffda658409
syscall = bpf_map_lookup_elem(&syscalls, &augmented_args.args.syscall_nr);
0.22 mov %rbp,%rsi
1.69 add $0xfffffffffffffec0,%rsi
syscall = bpf_map_lookup_elem(&syscalls, &augmented_args.args.syscall_nr);
movabs $0xffff975bfcd36000,%rdi
add $0xd0,%rdi
0.21 mov 0x0(%rsi),%eax
0.93 cmp $0x200,%rax
→ jae 0
0.10 shl $0x3,%rax
0.11 add %rdi,%rax
0.11 → jmp 0
xor %eax,%eax
if (syscall == NULL || !syscall->enabled)
1.07 cmp $0x0,%rax
→ je 0
if (syscall == NULL || !syscall->enabled)
6.57 movzbq 0x0(%rax),%rdi
if (syscall == NULL || !syscall->enabled)
cmp $0x0,%rdi
0.95 → je 0
mov $0x40,%r8d
switch (augmented_args.args.syscall_nr) {
mov -0x140(%rbp),%rdi
switch (augmented_args.args.syscall_nr) {
cmp $0x2,%rdi
→ je 0
cmp $0x101,%rdi
→ je 0
cmp $0x15,%rdi
→ jne 0
case SYS_OPEN: filename_arg = (const void *)args->args[0];
mov 0x10(%rbx),%rdx
→ jmp 0
case SYS_OPENAT: filename_arg = (const void *)args->args[1];
mov 0x18(%rbx),%rdx
if (filename_arg != NULL) {
cmp $0x0,%rdx
→ je 0
xor %edi,%edi
augmented_args.filename.reserved = 0;
mov %edi,-0x104(%rbp)
augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
mov %rbp,%rdi
add $0xffffffffffffff00,%rdi
augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
mov $0x100,%esi
→ callq *ffffffffda658499
mov $0x148,%r8d
augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
mov %eax,-0x108(%rbp)
augmented_args.filename.size = probe_read_str(&augmented_args.filename.value,
mov %rax,%rdi
shl $0x20,%rdi
shr $0x20,%rdi
if (augmented_args.filename.size < sizeof(augmented_args.filename.value)) {
cmp $0xff,%rdi
→ ja 0
len -= sizeof(augmented_args.filename.value) - augmented_args.filename.size;
add $0x48,%rax
len &= sizeof(augmented_args.filename.value) - 1;
and $0xff,%rax
mov %rax,%r8
mov %rbp,%rcx
return perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, &augmented_args, len);
add $0xfffffffffffffeb8,%rcx
mov %rbx,%rdi
movabs $0xffff975fbd72d800,%rsi
mov $0xffffffff,%edx
→ callq *ffffffffda658ad9
mov %rax,%r13
}
mov %r13,%rax
0.72 mov 0x0(%rbp),%rbx
mov 0x8(%rbp),%r13
1.16 mov 0x10(%rbp),%r14
0.10 mov 0x18(%rbp),%r15
0.42 add $0x28,%rbp
0.54 leaveq
0.54 ← retq
#
Please see 'man perf-config' to see how to control what should be seen,
via ~/.perfconfig [annotate] section, for instance, one can suppress the
source code and see just the disassembly, etc.
Alternatively, use the TUI bu just using 'perf annotate', press
'/bpf_prog' to see the bpf symbols, press enter and do the interactive
annotation, which allows for dumping to a file after selecting the
the various output tunables, for instance, the above without source code
intermixed, plus showing all the instruction offsets:
# perf annotate bpf_prog_819967866022f1e1_sys_enter
Then press: 's' to hide the source code + 'O' twice to show all
instruction offsets, then 'P' to print to the
bpf_prog_819967866022f1e1_sys_enter.annotation file, which will have:
# cat bpf_prog_819967866022f1e1_sys_enter.annotation
bpf_prog_819967866022f1e1_sys_enter() bpf_prog_819967866022f1e1_sys_enter
Event: cycles:ppp
53.41 0: push %rbp
0.63 1: mov %rsp,%rbp
0.31 4: sub $0x170,%rsp
1.93 b: sub $0x28,%rbp
7.02 f: mov %rbx,0x0(%rbp)
3.20 13: mov %r13,0x8(%rbp)
1.07 17: mov %r14,0x10(%rbp)
0.61 1b: mov %r15,0x18(%rbp)
0.11 1f: xor %eax,%eax
1.29 21: mov %rax,0x20(%rbp)
0.11 25: mov %rdi,%rbx
2.02 28: → callq *ffffffffda6776d9
2.76 2d: mov %eax,-0x148(%rbp)
33: mov %rbp,%rsi
36: add $0xfffffffffffffeb8,%rsi
3d: movabs $0xffff975ac2607800,%rdi
1.26 47: → callq *ffffffffda6789e9
4c: cmp $0x0,%rax
2.43 50: → je 0
52: add $0x38,%rax
0.21 56: xor %r13d,%r13d
0.81 59: cmp $0x0,%rax
5d: → jne 0
63: mov %rbp,%rdi
2.22 66: add $0xfffffffffffffeb8,%rdi
0.11 6d: mov $0x40,%esi
0.32 72: mov %rbx,%rdx
2.74 75: → callq *ffffffffda658409
0.22 7a: mov %rbp,%rsi
1.69 7d: add $0xfffffffffffffec0,%rsi
84: movabs $0xffff975bfcd36000,%rdi
8e: add $0xd0,%rdi
0.21 95: mov 0x0(%rsi),%eax
0.93 98: cmp $0x200,%rax
9f: → jae 0
0.10 a1: shl $0x3,%rax
0.11 a5: add %rdi,%rax
0.11 a8: → jmp 0
aa: xor %eax,%eax
1.07 ac: cmp $0x0,%rax
b0: → je 0
6.57 b6: movzbq 0x0(%rax),%rdi
bb: cmp $0x0,%rdi
0.95 bf: → je 0
c5: mov $0x40,%r8d
cb: mov -0x140(%rbp),%rdi
d2: cmp $0x2,%rdi
d6: → je 0
d8: cmp $0x101,%rdi
df: → je 0
e1: cmp $0x15,%rdi
e5: → jne 0
e7: mov 0x10(%rbx),%rdx
eb: → jmp 0
ed: mov 0x18(%rbx),%rdx
f1: cmp $0x0,%rdx
f5: → je 0
f7: xor %edi,%edi
f9: mov %edi,-0x104(%rbp)
ff: mov %rbp,%rdi
102: add $0xffffffffffffff00,%rdi
109: mov $0x100,%esi
10e: → callq *ffffffffda658499
113: mov $0x148,%r8d
119: mov %eax,-0x108(%rbp)
11f: mov %rax,%rdi
122: shl $0x20,%rdi
126: shr $0x20,%rdi
12a: cmp $0xff,%rdi
131: → ja 0
133: add $0x48,%rax
137: and $0xff,%rax
13d: mov %rax,%r8
140: mov %rbp,%rcx
143: add $0xfffffffffffffeb8,%rcx
14a: mov %rbx,%rdi
14d: movabs $0xffff975fbd72d800,%rsi
157: mov $0xffffffff,%edx
15c: → callq *ffffffffda658ad9
161: mov %rax,%r13
164: mov %r13,%rax
0.72 167: mov 0x0(%rbp),%rbx
16b: mov 0x8(%rbp),%r13
1.16 16f: mov 0x10(%rbp),%r14
0.10 173: mov 0x18(%rbp),%r15
0.42 177: add $0x28,%rbp
0.54 17b: leaveq
0.54 17c: ← retq
Another cool way to test all this is to symple use 'perf top' look for
those symbols, go there and press enter, annotate it live :-)
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
bc3bb79534 |
perf annotate: Calculate the max instruction name, align column to that
We were hardcoding '6' as the max instruction name, and we have lots
that are longer than that, see the diff from two 'P' printed TUI
annotations for a libc function that uses instructions with long names,
such as 'vpmovmskb' with its 9 chars:
--- __strcmp_avx2.annotation.before 2019-03-06 16:31:39.368020425 -0300
+++ __strcmp_avx2.annotation 2019-03-06 16:32:12.079450508 -0300
@@ -2,284 +2,284 @@
Event: cycles:ppp
Percent endbr64
- 0.10 mov %edi,%eax
+ 0.10 mov %edi,%eax
- xor %edx,%edx
+ xor %edx,%edx
- 3.54 vpxor %ymm7,%ymm7,%ymm7
+ 3.54 vpxor %ymm7,%ymm7,%ymm7
- or %esi,%eax
+ or %esi,%eax
- and $0xfff,%eax
+ and $0xfff,%eax
- cmp $0xf80,%eax
+ cmp $0xf80,%eax
- ↓ jg 370
+ ↓ jg 370
- 27.07 vmovdqu (%rdi),%ymm1
+ 27.07 vmovdqu (%rdi),%ymm1
- 7.97 vpcmpeqb (%rsi),%ymm1,%ymm0
+ 7.97 vpcmpeqb (%rsi),%ymm1,%ymm0
- 2.15 vpminub %ymm1,%ymm0,%ymm0
+ 2.15 vpminub %ymm1,%ymm0,%ymm0
- 4.09 vpcmpeqb %ymm7,%ymm0,%ymm0
+ 4.09 vpcmpeqb %ymm7,%ymm0,%ymm0
- 0.43 vpmovmskb %ymm0,%ecx
+ 0.43 vpmovmskb %ymm0,%ecx
- 1.53 test %ecx,%ecx
+ 1.53 test %ecx,%ecx
- ↓ je b0
+ ↓ je b0
- 5.26 tzcnt %ecx,%edx
+ 5.26 tzcnt %ecx,%edx
- 18.40 movzbl (%rdi,%rdx,1),%eax
+ 18.40 movzbl (%rdi,%rdx,1),%eax
- 7.09 movzbl (%rsi,%rdx,1),%edx
+ 7.09 movzbl (%rsi,%rdx,1),%edx
- 3.34 sub %edx,%eax
+ 3.34 sub %edx,%eax
2.37 vzeroupper
← retq
nop
- 50: tzcnt %ecx,%edx
+ 50: tzcnt %ecx,%edx
- movzbl 0x20(%rdi,%rdx,1),%eax
+ movzbl 0x20(%rdi,%rdx,1),%eax
- movzbl 0x20(%rsi,%rdx,1),%edx
+ movzbl 0x20(%rsi,%rdx,1),%edx
- sub %edx,%eax
+ sub %edx,%eax
vzeroupper
← retq
- data16 nopw %cs:0x0(%rax,%rax,1)
+ data16 nopw %cs:0x0(%rax,%rax,1)
Reported-by: Travis Downs <travis.downs@gmail.com>
LPU-Reference: CAOBGo4z1KfmWeOm6Et0cnX5Z6DWsG2PQbAvRn1MhVPJmXHrc5g@mail.gmail.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-89wsdd9h9g6bvq52sgp6d0u4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
8a249c73a5 |
perf annotate: Remove lots of headers from annotate.h
To reduce the chances changes trigger tons of rebuilds, more to come. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ytbykaku63862guk7muflcy4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jin Yao
|
ace4f8faea |
perf annotate: Compute average IPC and IPC coverage per symbol
Add support to 'perf report' annotate view or 'perf annotate --stdio2'
to aggregate the IPC derived from timed LBRs per symbol. We compute the
average IPC and the IPC coverage percentage.
For example:
$ perf annotate --stdio2
Percent IPC Cycle (Average IPC: 2.30, IPC Coverage: 54.8%)
Disassembly of section .text:
000000000003aac0 <random@@GLIBC_2.2.5>:
8.32 3.28 sub $0x18,%rsp
3.28 mov $0x1,%esi
3.28 xor %eax,%eax
3.28 cmpl $0x0,argp_program_version_hook@@GLIBC_2.2.5+0x1e0
11.57 3.28 1 ↓ je 20
lock cmpxchg %esi,__abort_msg@@GLIBC_PRIVATE+0x8a0
↓ jne 29
↓ jmp 43
11.57 1.10 20: cmpxchg %esi,__abort_msg@@GLIBC_PRIVATE+0x8a0
0.00 1.10 1 ↓ je 43
29: lea __abort_msg@@GLIBC_PRIVATE+0x8a0,%rdi
sub $0x80,%rsp
→ callq __lll_lock_wait_private
add $0x80,%rsp
0.00 3.00 43: lea __ctype_b@GLIBC_2.2.5+0x38,%rdi
3.00 lea 0xc(%rsp),%rsi
8.49 3.00 1 → callq __random_r
7.91 1.94 cmpl $0x0,argp_program_version_hook@@GLIBC_2.2.5+0x1e0
0.00 1.94 1 ↓ je 68
lock decl __abort_msg@@GLIBC_PRIVATE+0x8a0
↓ jne 70
↓ jmp 8a
0.00 2.00 68: decl __abort_msg@@GLIBC_PRIVATE+0x8a0
21.56 2.00 1 ↓ je 8a
70: lea __abort_msg@@GLIBC_PRIVATE+0x8a0,%rdi
sub $0x80,%rsp
→ callq __lll_unlock_wake_private
add $0x80,%rsp
21.56 2.90 8a: movslq 0xc(%rsp),%rax
2.90 add $0x18,%rsp
9.03 2.90 1 ← retq
It shows for this symbol the average IPC is 2.30 and the IPC coverage is
54.8%.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1543586097-27632-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Kim Phillips
|
4e67b2a5df |
perf annotate: Fix parsing aarch64 branch instructions after objdump update
Starting with binutils 2.28, aarch64 objdump adds comments to the
disassembly output to show the alternative names of a condition code
[1].
It is assumed that commas in objdump comments could occur in other
arches now or in the future, so this fix is arch-independent.
The fix could have been done with arm64 specific jump__parse and
jump__scnprintf functions, but the jump__scnprintf instruction would
have to have its comment character be a literal, since the scnprintf
functions cannot receive a struct arch easily.
This inconvenience also applies to the generic jump__scnprintf, which is
why we add a raw_comment pointer to struct ins_operands, so the __parse
function assigns it to be re-used by its corresponding __scnprintf
function.
Example differences in 'perf annotate --stdio2' output on an aarch64
perf.data file:
BEFORE: → b.cs ffff200008133d1c <unwind_frame+0x18c> // b.hs, dffff7ecc47b
AFTER : ↓ b.cs 18c
BEFORE: → b.cc ffff200008d8d9cc <get_alloc_profile+0x31c> // b.lo, b.ul, dffff727295b
AFTER : ↓ b.cc 31c
The branch target labels 18c and 31c also now appear in the output:
BEFORE: add x26, x29, #0x80
AFTER : 18c: add x26, x29, #0x80
BEFORE: add x21, x21, #0x8
AFTER : 31c: add x21, x21, #0x8
The Fixes: tag below is added so stable branches will get the update; it
doesn't necessarily mean that commit was broken at the time, rather it
didn't withstand the aarch64 objdump update.
Tested no difference in output for sample x86_64, power arch perf.data files.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=bb7eff5206e4795ac79c177a80fe9f4630aaf730
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Fixes:
|
||
|
Jiri Olsa
|
88c2119077 |
perf annotate: Add --percent-type option
Add --percent-type option to set annotation percent type from following choices: global-period, local-period, global-hits, local-hits Examples: $ perf annotate --percent-type period-local --stdio | head -1 Percent | Source code ... es, percent: local period) $ perf annotate --percent-type hits-local --stdio | head -1 Percent | Source code ... es, percent: local hits) $ perf annotate --percent-type hits-global --stdio | head -1 Percent | Source code ... es, percent: global hits) $ perf annotate --percent-type period-global --stdio | head -1 Percent | Source code ... es, percent: global period) The local/global keywords set if the percentage is computed in the scope of the function (local) or the whole data (global). The period/hits keywords set the base the percentage is computed on - the samples period or the number of samples (hits). Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20180804130521.11408-20-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jiri Olsa
|
3e0d795319 |
perf annotate: Add support to toggle percent type
Add new key bindings to toggle percent type/base in annotation UI browser: 'p' to switch between local and global percent type 'b' to switch between hits and perdio percent base Add the following help messages to the UI browser '?' window: ... p Toggle percent type [local/global] b Toggle percent base [period/hits] ... Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20180804130521.11408-17-jolsa@kernel.org [ Moved percent_type to be the last arg to sym_title(), its an arg to what is being formmated (buf, size) ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jiri Olsa
|
4c650ddc2e |
perf annotate: Pass 'struct annotation_options' to map_symbol__annotation_dump()
Pass 'struct annotation_options' to map_symbol__annotation_dump(), to carry on and pass the percent_type value. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20180804130521.11408-15-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jiri Olsa
|
796ca33d5c |
perf annotate: Add percent_type to struct annotation_options
It will be used to carry user selection of percent type for annotation output. Passing the percent_type to the annotation_line__print function as the first step and making it default to current percentage type (PERCENT_HITS_LOCAL) value. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20180804130521.11408-13-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jiri Olsa
|
e58684df91 |
perf annotate: Add PERCENT_PERIOD_GLOBAL percent value
Adding and computing global period percent value for annotation line. Storing it in struct annotation_data percent array under new PERCENT_PERIOD_GLOBAL index. At the moment it's not displayed, it's coming in following patches. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20180804130521.11408-12-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jiri Olsa
|
ab371169fb |
perf annotate: Add PERCENT_PERIOD_LOCAL percent value
Adding and computing local period percent value for annotation line. Storing it in struct annotation_data percent array under new PERCENT_PERIOD_LOCAL index. At the moment it's not displayed, it's coming in following patches. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20180804130521.11408-11-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |