If segs_per_sec is over 1 like under SMR, previously f2fs issues discard
commands redundantly on the same section, since we didn't move end position
for the previous discard command.
E.g.,
start end
| |
prefree_bitmap = [01111100111100]
And, after issue discard for this section,
end start
| |
prefree_bitmap = [01111100111100]
Select this section again by searching from (end + 1),
start end
| |
prefree_bitmap = [01111100111100]
Fixes: 36abef4e79 ("f2fs: introduce mode=lfs mount option")
Cc: <stable@vger.kernel.org>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
fix such pclint warning:
...
Loss of precision (arg. no. 2) (unsigned long long to unsigned int))
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The introduction of the multi-device feature partially broke the support
for zoned block devices. In the function f2fs_scan_devices, sbi->devs
allocation and initialization is skipped in the case of a single device
mount. This result in no device information structure being allocated
for the device. This is fine if the device is a regular device, but in
the case of a zoned block device, the device zone type array is not
initialized, which causes the function __f2fs_issue_discard_zone to fail
as get_blkz_type is unable to determine the zone type of a section.
Fix this by always allocating and initializing the sbi->devs device
information array even in the case of a single device if that device is
zoned. For this particular case, make sure to obtain a reference on the
single device so that the call to blkdev_put() in destroy_device_list
operates as expected.
Fixes: 3c62be17d4 ("f2fs: support multiple devices")
Cc: <stable@vger.kernel.org> # v4.10
Signed-off-by: Masato Suzuki <masato.suzuki@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch remove redundant set_page_dirty in truncate_blocks
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It needs to double cache size of write_io_dummy mempool, otherwise we may
run out of cache in scenraio of Data/Node IOs were issued concurrently.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We should only account F2FS_{CP_}WB_DATA IOs for write path, fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS has define MAX_FREE_NIDS for maximum of cached free nids target.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are four places that getting the crc value in f2fs_checkpoint,
just add a new helper cur_cp_crc for them.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs removes the old xattr data and appends the new data although
the new data is same as the exist.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since commit ee6d182f2a ("f2fs: remove syncing inode page in all the
cases") delayed inode element updating from inode cache to node page
cache, so once largest cached extent is updated, we can make inode dirty
immediately instead of checking and updating it in the end of extent
cache update.
The above commit didn't clean up unneeded codes in extent_cache.c, let's
finish the job in this patch.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We use has_not_enough_free_secs to check if there are enough free segments,
(free_sections(sbi) + freed) <=
(node_secs + 2 * dent_secs + imeta_secs +
reserved_sections(sbi) + needed);
Under scenario with large number of dirty nodes, these nodes would be flushed
during cp, as a result, right side of the inequality would be decreased, while
left side stays unchanged if these nodes are flushed in SSR way, which means
there are enough free segments after this cp.
For this case, we just do a bggc instead of fggc.
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In SSR mode, we can allocate target segment which has different
temperature type from the type of current block, in order to avoid
mixing coldest and hottest data/node as much as possible, change
SSR allocation policy to select closer temperature for current
block prior.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously kernel message can show that in which function we do the
injection, but unfortunately, most of the caller are the same, for
tracking more information of injection path, it needs to show upper
caller's name. This patch supports that ability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Similar as f2fs_write_inode, f2fs_write_inline_data just
mark inode page dirty, so it's no need to write inline data
under read lock of cp_rwsem.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patches adds bitmaps to represent empty or full NAT blocks containing
free nid entries.
If we can find valid crc|cp_ver in the last block of checkpoint pack, we'll
use these bitmaps when building free nids. In order to avoid checkpointing
burden, up-to-date bitmaps will be flushed only during umount time. So,
normally we can get this gain, but when power-cut happens, we rely on fsck.f2fs
which recovers this bitmap again.
After this patch, we build free nids from nid #0 at mount time to make more
full NAT blocks, but in runtime, we check empty NAT blocks to load free nids
without loading any NAT pages from disk.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch replace rw semaphore extent_tree_lock with mutex lock
for no read cases with this lock.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When more than one data blocks are allocated, the F2FS_MAP_UNWRITTEN/MAPPED
flags will be overlapped by F2FS_MAP_NEW at the later times.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
proc A: proc B:
- writeback_sb_inodes
- __writeback_single_inode
- do_writepages
- f2fs_write_node_pages
- f2fs_balance_fs_bg - write_checkpoint
- build_free_nids - flush_nat_entries
- __build_free_nids - __flush_nat_entry_set
- ra_meta_pages - get_next_nat_page
- current_nat_addr - set_to_next_nat
[do nat_bitmap checking] - f2fs_change_bit
For proc A, nat_bitmap and nat_bitmap_mir would be compared without lock_op and
nm_i->nat_tree_lock, while proc B is changing nat_bitmap/nat_bitmap_ver in cp.
So it is normal for nat_bitmap/nat_bitmap diffrence under such scenario.
This patch fix this by removing the monitoring point.
[Fix: 599a09b f2fs: check in-memory nat version bitmap]
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since has_not_enough_free_secs(sbi, 0, 0) must be true if has_not_enough_
free_secs(sbi, sec_freed, 0) is true, write_checkpoint is sure to execute in
both conditions.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For converntional zones, we don't need to align discard commands to exact zone
size.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We don't need to wait for each discard commands when unmounting the image.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We have a kernel thread to issue discard commands, so we can increase the
number of batched discard sections. By default, now it becomes 4GB range.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds MAX_DISCARD_BLOCKS() to avoid issuing too much large single
discard command.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull btrfs updates from Chris Mason:
"This has a series of fixes and cleanups that Dave Sterba has been
collecting.
There is a pretty big variety here, cleaning up internal APIs and
fixing corner cases"
* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (124 commits)
Btrfs: use the correct type when creating cow dio extent
Btrfs: fix deadlock between dedup on same file and starting writeback
btrfs: use btrfs_debug instead of pr_debug in transaction abort
btrfs: btrfs_truncate_free_space_cache always allocates path
btrfs: free-space-cache, clean up unnecessary root arguments
btrfs: convert btrfs_inc_block_group_ro to accept fs_info
btrfs: flush_space always takes fs_info->fs_root
btrfs: pass fs_info to (more) routines that are only called with extent_root
btrfs: qgroup: Move half of the qgroup accounting time out of commit trans
btrfs: remove unused parameter from adjust_slots_upwards
btrfs: remove unused parameters from __btrfs_write_out_cache
btrfs: remove unused parameter from cleanup_write_cache_enospc
btrfs: remove unused parameter from __add_inode_ref
btrfs: remove unused parameter from clone_copy_inline_extent
btrfs: remove unused parameters from btrfs_cmp_data
btrfs: remove unused parameter from __add_inline_refs
btrfs: remove unused parameters from scrub_setup_wr_ctx
btrfs: remove unused parameter from create_snapshot
btrfs: remove unused parameter from init_first_rw_device
btrfs: remove unused parameter from __btrfs_alloc_chunk
...
Merge more updates from Andrew Morton:
- almost all of the rest of MM
- misc bits
- KASAN updates
- procfs
- lib/ updates
- checkpatch updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (124 commits)
checkpatch: remove false unbalanced braces warning
checkpatch: notice unbalanced else braces in a patch
checkpatch: add another old address for the FSF
checkpatch: update $logFunctions
checkpatch: warn on logging continuations
checkpatch: warn on embedded function names
lib/lz4: remove back-compat wrappers
fs/pstore: fs/squashfs: change usage of LZ4 to work with new LZ4 version
crypto: change LZ4 modules to work with new LZ4 module version
lib/decompress_unlz4: change module to work with new LZ4 module version
lib: update LZ4 compressor module
lib/test_sort.c: make it explicitly non-modular
lib: add CONFIG_TEST_SORT to enable self-test of sort()
rbtree: use designated initializers
linux/kernel.h: fix DIV_ROUND_CLOSEST to support negative divisors
lib/find_bit.c: micro-optimise find_next_*_bit
lib: add module support to atomic64 tests
lib: add module support to glob tests
lib: add module support to crc32 tests
kernel/ksysfs.c: add __ro_after_init to bin_attribute structure
...
Update fs/pstore and fs/squashfs to use the updated functions from the
new LZ4 module.
Link: http://lkml.kernel.org/r/1486321748-19085-5-git-send-email-4sschmid@informatik.uni-hamburg.de
Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously, the hidepid parameter was checked by comparing literal
integers 0, 1, 2. Let's add a proper enum for this, to make the
checking more expressive:
0 → HIDEPID_OFF
1 → HIDEPID_NO_ACCESS
2 → HIDEPID_INVISIBLE
This changes the internal labelling only, the userspace-facing interface
remains unmodified, and still works with literal integers 0, 1, 2.
No functional changes.
Link: http://lkml.kernel.org/r/1484572984-13388-2-git-send-email-djalal@gmail.com
Signed-off-by: Lafcadio Wluiki <wluikil@gmail.com>
Signed-off-by: Djalal Harouni <tixxdz@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After staring at this code for a while I've figured using small 2-entry
array describing ARGV and ENVP is the way to address code duplication
critique.
Link: http://lkml.kernel.org/r/20170105185724.GA12027@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Link: http://lkml.kernel.org/r/4fd1f82818665705ce75c5156a060ae7caa8e0a9.1482160150.git.geliangtang@gmail.com
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the non-cooperative userfaultfd case, the process exit may race with
outstanding mcopy_atomic called by the uffd monitor. Returning -ENOSPC
instead of -EINVAL when mm is already gone will allow uffd monitor to
distinguish this case from other error conditions.
Link: http://lkml.kernel.org/r/1485542673-24387-6-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow userfaultfd monitor track termination of the processes that have
memory backed by the uffd.
[rppt@linux.vnet.ibm.com: add comment]
Link: http://lkml.kernel.org/r/20170202135448.GB19804@rapoport-lnxLink: http://lkml.kernel.org/r/1485542673-24387-4-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a non-cooperative userfaultfd monitor copies pages in the
background, it may encounter regions that were already unmapped.
Addition of UFFD_EVENT_UNMAP allows the uffd monitor to track precisely
changes in the virtual memory layout.
Since there might be different uffd contexts for the affected VMAs, we
first should create a temporary representation for the unmap event for
each uffd context and then notify them one by one to the appropriate
userfault file descriptors.
The event notification occurs after the mmap_sem has been released.
[arnd@arndb.de: fix nommu build]
Link: http://lkml.kernel.org/r/20170203165141.3665284-1-arnd@arndb.de
[mhocko@suse.com: fix nommu build]
Link: http://lkml.kernel.org/r/20170202091503.GA22823@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/1485542673-24387-3-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since the introduction of FAULT_FLAG_SIZE to the vm_fault flag, it has
been somewhat painful with getting the flags set and removed at the
correct locations. More than one kernel oops was introduced due to
difficulties of getting the placement correctly.
Remove the flag values and introduce an input parameter to huge_fault
that indicates the size of the page entry. This makes the code easier
to trace and should avoid the issues we see with the fault flags where
removal of the flag was necessary in the fallback paths.
Link: http://lkml.kernel.org/r/148615748258.43180.1690152053774975329.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "1G transparent hugepage support for device dax", v2.
The following series implements support for 1G trasparent hugepage on
x86 for device dax. The bulk of the code was written by Mathew Wilcox a
while back supporting transparent 1G hugepage for fs DAX. I have
forward ported the relevant bits to 4.10-rc. The current submission has
only the necessary code to support device DAX.
Comments from Dan Williams: So the motivation and intended user of this
functionality mirrors the motivation and users of 1GB page support in
hugetlbfs. Given expected capacities of persistent memory devices an
in-memory database may want to reduce tlb pressure beyond what they can
already achieve with 2MB mappings of a device-dax file. We have
customer feedback to that effect as Willy mentioned in his previous
version of these patches [1].
[1]: https://lkml.org/lkml/2016/1/31/52
Comments from Nilesh @ Oracle:
There are applications which have a process model; and if you assume
10,000 processes attempting to mmap all the 6TB memory available on a
server; we are looking at the following:
processes : 10,000
memory : 6TB
pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB
pmd @ 2M page size: 120,000 / 512 = ~240GB
pud @ 1G page size: 240GB / 512 = ~480MB
As you can see with 2M pages, this system will use up an exorbitant
amount of DRAM to hold the page tables; but the 1G pages finally brings
it down to a reasonable level. Memory sizes will keep increasing; so
this number will keep increasing.
An argument can be made to convert the applications from process model
to thread model, but in the real world that may not be always practical.
Hopefully this helps explain the use case where this is valuable.
This patch (of 3):
In preparation for adding the ability to handle PUD pages, convert
vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The
vm_fault structure is extended to include a union of the different page
table pointers that may be needed, and three flag bits are reserved to
indicate which type of pointer is in the union.
[ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()]
Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com
[dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path]
Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com
Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "userfaultfd: non-cooperative: add madvise() event for
MADV_REMOVE request".
These patches add notification of madvise(MADV_REMOVE) event to
non-cooperative userfaultfd monitor.
The first pacth renames EVENT_MADVDONTNEED to EVENT_REMOVE along with
relevant functions and structures. Using _REMOVE instead of
_MADVDONTNEED describes the event semantics more clearly and I hope it's
not too late for such change in the ABI.
This patch (of 3):
The UFFD_EVENT_MADVDONTNEED purpose is to notify uffd monitor about
removal of certain range from address space tracked by userfaultfd.
Hence, UFFD_EVENT_REMOVE seems to better reflect the operation
semantics. Respectively, 'madv_dn' field of uffd_msg is renamed to
'remove' and the madvise_userfault_dontneed callback is renamed to
userfaultfd_remove.
Link: http://lkml.kernel.org/r/1484814154-1557-2-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull block updates and fixes from Jens Axboe:
- NVMe updates and fixes that missed the first pull request. This
includes bug fixes, and support for autonomous power management.
- Fix from Christoph for missing clear of the request payload, causing
a problem with (at least) the storvsc driver.
- Further fixes for the queue/bdi life time issues from Jan.
- The Kconfig mq scheduler update from me.
- Fixing a use-after-free in dm-rq, spotted by Bart, introduced in this
merge window.
- Three fixes for nbd from Josef.
- Bug fix from Omar, fixing a bug in sas transport code that oopses
when bsg ioctls were used. From Omar.
- Improvements to the queue restart and tag wait from from Omar.
- Set of fixes for the sed/opal code from Scott.
- Three trivial patches to cciss from Tobin
* 'for-linus' of git://git.kernel.dk/linux-block: (41 commits)
dm-rq: don't dereference request payload after ending request
blk-mq-sched: separate mark hctx and queue restart operations
blk-mq: use sbq wait queues instead of restart for driver tags
block/sed-opal: Propagate original error message to userland.
nvme/pci: re-check security protocol support after reset
block/sed-opal: Introduce free_opal_dev to free the structure and clean up state
nvme: detect NVMe controller in recent MacBooks
nvme-rdma: add support for host_traddr
nvmet-rdma: Fix error handling
nvmet-rdma: use nvme cm status helper
nvme-rdma: move nvme cm status helper to .h file
nvme-fc: don't bother to validate ioccsz and iorcsz
nvme/pci: No special case for queue busy on IO
nvme/core: Fix race kicking freed request_queue
nvme/pci: Disable on removal when disconnected
nvme: Enable autonomous power state transitions
nvme: Add a quirk mechanism that uses identify_ctrl
nvme: make nvmf_register_transport require a create_ctrl callback
nvme: Use CNS as 8-bit field and avoid endianness conversion
nvme: add semicolon in nvme_command setting
...
NFSv4 requires a transport "that is specified to avoid network
congestion" (RFC 7530, section 3.1, paragraph 2). In practical terms,
that means that you should not run NFSv4 over UDP. The server has never
enforced that requirement, however.
This patchset fixes this by adding a new flag to the svc_version that
states that it has these transport requirements. With that, we can check
that the transport has XPT_CONG_CTRL set before processing an RPC. If it
doesn't we reject it with RPC_PROG_MISMATCH.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's just simpler to read this way, IMO. Also, no need to explicitly
set vs_hidden to false in the nfsacl ones.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
dprintk already provides a KERN_* prefix; this KERN_INFO just shows up
as some odd characters in the output.
Simplify the message a bit while we're there.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
CEPH_OSD_FLAG_ONDISK is set in account_request().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
- ask for a commit reply instead of an ack reply in
__ceph_pool_perm_get()
- don't ask for both ack and commit replies in ceph_sync_write()
- since just only one reply is requested now, i_unsafe_writes list
will always be empty -- kill ceph_sync_write_wait() and go back to
a standard ->evict_inode()
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Previously, if type is CURSEG_HOT_DATA, we only check CURSEG_HOT_DATA only.
This patch fixes to search all the different types for SSR.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In allocate_segment_by_default(), need_SSR() already detected it's time to do
SSR. So, let's try to find victims for data segments more aggressively in time.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As data segment gc may lead dnode dirty, so the greedy cost for data segment
should be valid blocks * 2, that is data segment is prior to node segment.
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
SIT information should be updated before segment allocation, since SSR needs
latest valid block information. Current code does not update the old_blkaddr
info in sit_entry, so adjust the allocate_segment to its proper location. Commit
5e443818fa ("f2fs: handle dirty segments inside
refresh_sit_entry") puts it into wrong location.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull namespace updates from Eric Biederman:
"There is a lot here. A lot of these changes result in subtle user
visible differences in kernel behavior. I don't expect anything will
care but I will revert/fix things immediately if any regressions show
up.
From Seth Forshee there is a continuation of the work to make the vfs
ready for unpriviled mounts. We had thought the previous changes
prevented the creation of files outside of s_user_ns of a filesystem,
but it turns we missed the O_CREAT path. Ooops.
Pavel Tikhomirov and Oleg Nesterov worked together to fix a long
standing bug in the implemenation of PR_SET_CHILD_SUBREAPER where only
children that are forked after the prctl are considered and not
children forked before the prctl. The only known user of this prctl
systemd forks all children after the prctl. So no userspace
regressions will occur. Holding earlier forked children to the same
rules as later forked children creates a semantic that is sane enough
to allow checkpoing of processes that use this feature.
There is a long delayed change by Nikolay Borisov to limit inotify
instances inside a user namespace.
Michael Kerrisk extends the API for files used to maniuplate
namespaces with two new trivial ioctls to allow discovery of the
hierachy and properties of namespaces.
Konstantin Khlebnikov with the help of Al Viro adds code that when a
network namespace exits purges it's sysctl entries from the dcache. As
in some circumstances this could use a lot of memory.
Vivek Goyal fixed a bug with stacked filesystems where the permissions
on the wrong inode were being checked.
I continue previous work on ptracing across exec. Allowing a file to
be setuid across exec while being ptraced if the tracer has enough
credentials in the user namespace, and if the process has CAP_SETUID
in it's own namespace. Proc files for setuid or otherwise undumpable
executables are now owned by the root in the user namespace of their
mm. Allowing debugging of setuid applications in containers to work
better.
A bug I introduced with permission checking and automount is now
fixed. The big change is to mark the mounts that the kernel initiates
as a result of an automount. This allows the permission checks in sget
to be safely suppressed for this kind of mount. As the permission
check happened when the original filesystem was mounted.
Finally a special case in the mount namespace is removed preventing
unbounded chains in the mount hash table, and making the semantics
simpler which benefits CRIU.
The vfs fix along with related work in ima and evm I believe makes us
ready to finish developing and merge fully unprivileged mounts of the
fuse filesystem. The cleanups of the mount namespace makes discussing
how to fix the worst case complexity of umount. The stacked filesystem
fixes pave the way for adding multiple mappings for the filesystem
uids so that efficient and safer containers can be implemented"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc/sysctl: Don't grab i_lock under sysctl_lock.
vfs: Use upper filesystem inode in bprm_fill_uid()
proc/sysctl: prune stale dentries during unregistering
mnt: Tuck mounts under others instead of creating shadow/side mounts.
prctl: propagate has_child_subreaper flag to every descendant
introduce the walk_process_tree() helper
nsfs: Add an ioctl() to return owner UID of a userns
fs: Better permission checking for submounts
exit: fix the setns() && PR_SET_CHILD_SUBREAPER interaction
vfs: open() with O_CREAT should not create inodes with unknown ids
nsfs: Add an ioctl() to return the namespace type
proc: Better ownership of files for non-dumpable tasks in user namespaces
exec: Remove LSM_UNSAFE_PTRACE_CAP
exec: Test the ptracer's saved cred to see if the tracee can gain caps
exec: Don't reset euid and egid when the tracee has CAP_SETUID
inotify: Convert to using per-namespace limits
Before attempting to split a leaf we try to migrate items from the leaf to
its right and left siblings. We start by trying to move items into the
rigth sibling and, if the new item is meant to be inserted at the end of
our leaf, we try to free from our leaf an amount of bytes equal to the
number of bytes used by the new item, by setting the variable space_needed
to the byte size of that new item. However if we fail to move enough items
to the right sibling due to lack of space in that sibling, we then try
to move items into the left sibling, and in that case we try to free
an amount equal to the size of the new item from our leaf, when we need
only to free an amount corresponding to the size of the new item minus
the current free space of our leaf. So make sure that before we try to
move items to the left sibling we do set the variable space_needed with
a value corresponding to the new item's size minus the leaf's current
free space.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
If we have a file with an implicit hole (NO_HOLES feature enabled) that
has an extent following the hole, delayed writes against regions of the
file behind the hole happened before but were not yet flushed and then
we truncate the file to a smaller size that lies inside the hole, we
end up persisting a wrong disk_i_size value for our inode that leads to
data loss after umounting and mounting again the filesystem or after
the inode is evicted and loaded again.
This happens because at inode.c:btrfs_truncate_inode_items() we end up
setting last_size to the offset of the extent that we deleted and that
followed the hole. We then pass that value to btrfs_ordered_update_i_size()
which updates the inode's disk_i_size to a value smaller then the offset
of the buffered (delayed) writes.
Example reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0x01 0K 32K" /mnt/foo
$ xfs_io -d -c "pwrite -S 0x02 -b 32K 64K 32K" /mnt/foo
$ xfs_io -c "truncate 60K" /mnt/foo
--> inode's disk_i_size updated to 0
$ md5sum /mnt/foo
3c5ca3c3ab42f4b04d7e7eb0b0d4d806 /mnt/foo
$ umount /dev/sdb
$ mount /dev/sdb /mnt
$ md5sum /mnt/foo
d41d8cd98f00b204e9800998ecf8427e /mnt/foo
--> Empty file, all data lost!
Cc: <stable@vger.kernel.org> # 3.14+
Fixes: 16e7549f04 ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
When using the NO_HOLES feature, during an incremental send we often issue
write operations for holes when we should not, because that range is already
a hole in the destination snapshot. While that does not change the contents
of the file at the receiver, it avoids preservation of file holes, leading
to wasted disk space and extra IO during send/receive.
A couple examples where the holes are not preserved follows.
$ mkfs.btrfs -O no-holes -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0xaa 0 4K" /mnt/foo
$ xfs_io -f -c "pwrite -S 0xaa 0 4K" -c "pwrite -S 0xbb 1028K 4K" /mnt/bar
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
# Now add one new extent to our first test file, increasing its size and
# leaving a 1Mb hole between the first extent and this new extent.
$ xfs_io -c "pwrite -S 0xbb 1028K 4K" /mnt/foo
# Now overwrite the last extent of our second test file.
$ xfs_io -c "pwrite -S 0xcc 1028K 4K" /mnt/bar
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ xfs_io -r -c "fiemap -v" /mnt/snap2/foo
/mnt/snap2/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 25088..25095 8 0x2000
1: [8..2055]: hole 2048
2: [2056..2063]: 24576..24583 8 0x2001
$ xfs_io -r -c "fiemap -v" /mnt/snap2/bar
/mnt/snap2/bar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 25096..25103 8 0x2000
1: [8..2055]: hole 2048
2: [2056..2063]: 24584..24591 8 0x2001
$ btrfs send /mnt/snap1 -f /tmp/1.snap
$ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap
$ umount /mnt
# It's not relevant to enable no-holes in the new filesystem.
$ mkfs.btrfs -O no-holes -f /dev/sdc
$ mount /dev/sdc /mnt
$ btrfs receive /mnt -f /tmp/1.snap
$ btrfs receive /mnt -f /tmp/2.snap
$ xfs_io -r -c "fiemap -v" /mnt/snap2/foo
/mnt/snap2/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 24576..24583 8 0x2000
1: [8..2063]: 25624..27679 2056 0x1
$ xfs_io -r -c "fiemap -v" /mnt/snap2/bar
/mnt/snap2/bar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 24584..24591 8 0x2000
1: [8..2063]: 27680..29735 2056 0x1
The holes do not exist in the second filesystem and they were replaced
with extents filled with the byte 0x00, making each file take 1032Kb of
space instead of 8Kb.
So fix this by not issuing the write operations consisting of buffers
filled with the byte 0x00 when the destination snapshot already has a
hole for the respective range.
A test case for fstests will follow soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
We log holes explicitly by using file extent items, however when replaying
a log tree, if a logged file extent item corresponds to a hole and the
NO_HOLES feature is enabled we do not need to copy the file extent item
into the fs/subvolume tree, as the absence of such file extent items is
the purpose of the NO_HOLES feature. So skip the copying of file extent
items representing holes when the NO_HOLES feature is enabled.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When falling back from a nocow write to a regular cow write, we were
leaking the subvolume writers counter in 2 situations, preventing
snapshot creation from ever completing in the future, as it waits
for that counter to go down to zero before the snapshot creation
starts.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Improved changelog and subject]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Very often we have the checksums for an extent spread in multiple items
in the checksums tree, and currently the algorithm to delete them starts
by looking for them one by one and then deleting them one by one, which
is not optimal since each deletion involves shifting all the other items
in the leaf and when the leaf reaches some low threshold, to move items
off the leaf into its left and right neighbor leafs. Also, after each
item deletion we release our search path and start a new search for other
checksums items.
So optimize this by deleting in bulk all the items in the same leaf that
contain checksums for the extent being freed.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
When both the parent and send snapshots have a directory inode with the
same number but different generations (therefore they are different
inodes) and both have an entry with the same name, an incremental send
stream will contain an invalid rmdir operation that refers to the
orphanized name of the inode from the parent snapshot.
The following example scenario shows how this happens.
Parent snapshot:
.
|---- d259_old/ (ino 259, gen 9)
| |---- d1/ (ino 258, gen 9)
|
|---- f (ino 257, gen 9)
Send snapshot:
.
|---- d258/ (ino 258, gen 7)
|---- d259/ (ino 259, gen 7)
|---- d1/ (ino 257, gen 7)
When the kernel is processing inode 258 it notices that in both snapshots
there is an inode numbered 259 that is a parent of an inode 258. However
it ignores the fact that the inodes numbered 259 have different generations
in both snapshots, which means they are effectively different inodes.
Then it checks that both inodes 259 have a dentry named "d1" and because
of that it issues a rmdir operation with orphanized name of the inode 258
from the parent snapshot. This happens at send.c:process_record_refs(),
which calls send.c:did_overwrite_first_ref() that returns true and because
of that later on at process_recorded_refs() such rmdir operation is issued
because the inode being currently processed (258) is a directory and it
was deleted in the send snapshot (and replaced with another inode that has
the same number and is a directory too).
Fix this issue by comparing the generations of parent directory inodes
that have the same number and make send.c:did_overwrite_first_ref() when
the generations are different.
The following steps reproduce the problem.
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ touch /mnt/f
$ mkdir /mnt/d1
$ mkdir /mnt/d259_old
$ mv /mnt/d1 /mnt/d259_old/d1
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ btrfs send /mnt/snap1 -f /tmp/1.snap
$ umount /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/d1
$ mkdir /mnt/dir258
$ mkdir /mnt/dir259
$ mv /mnt/d1 /mnt/dir259/d1
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs receive /mnt/ -f /tmp/1.snap
# Take note that once the filesystem is created, its current
# generation has value 7 so the inodes from the second snapshot all have
# a generation value of 7. And after receiving the first snapshot
# the filesystem is at a generation value of 10, because the call to
# create the second snapshot bumps the generation to 8 (the snapshot
# creation ioctl does a transaction commit), the receive command calls
# the snapshot creation ioctl to create the first snapshot, which bumps
# the filesystem's generation to 9, and finally when the receive
# operation finishes it calls an ioctl to transition the first snapshot
# (snap1) from RW mode to RO mode, which does another transaction commit
# and bumps the filesystem's generation to 10. This means all the inodes
# in the first snapshot (snap1) have a generation value of 9.
$ rm -f /tmp/1.snap
$ btrfs send /mnt/snap1 -f /tmp/1.snap
$ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap
$ umount /mnt
$ mkfs.btrfs -f /dev/sdd
$ mount /dev/sdd /mnt
$ btrfs receive /mnt -f /tmp/1.snap
$ btrfs receive -vv /mnt -f /tmp/2.snap
receiving snapshot mysnap2 uuid=9c03962f-f620-0047-9f98-32e5a87116d9, ctransid=7 parent_uuid=d17a6e3f-14e5-df4f-be39-a7951a5399aa, parent_ctransid=9
utimes
unlink f
mkdir o257-7-0
mkdir o259-7-0
rename o257-7-0 -> o259-7-0/d1
chown o259-7-0/d1 - uid=0, gid=0
chmod o259-7-0/d1 - mode=0755
utimes o259-7-0/d1
rmdir o258-9-0
ERROR: rmdir o258-9-0 failed: No such file or directory
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Rewrote changelog to be more precise and clear]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When we are checking if we need to delay the rename operation for an
inode we not checking if a parent inode that exists in the send and
parent snapshots is really the same inode or not, that is, we are not
comparing the generation number of the parent inode in the send and
parent snapshots. Not only this results in unnecessarily delaying a
rename operation but also can later on make us generate an incorrect
name for a new inode in the send snapshot that has the same number
as another inode in the parent snapshot but a different generation.
Here follows an example where this happens.
Parent snapshot:
. (ino 256, gen 3)
|--- dir258/ (ino 258, gen 7)
| |--- dir257/ (ino 257, gen 7)
|
|--- dir259/ (ino 259, gen 7)
Send snapshot:
. (ino 256, gen 3)
|--- file258 (ino 258, gen 10)
|
|--- new_dir259/ (ino 259, gen 10)
|--- dir257/ (ino 257, gen 7)
The following steps happen when computing the incremental send stream:
1) When processing inode 257, its new parent is created using its orphan
name (o257-21-0), and the rename operation for inode 257 is delayed
because its new parent (inode 259) was not yet processed - this
decision to delay the rename operation does not make much sense
because the inode 259 in the send snapshot is a new inode, it's not
the same as inode 259 in the parent snapshot.
2) When processing inode 258 we end up delaying its rmdir operation,
because inode 257 was not yet renamed (moved away from the directory
inode 258 represents). We also create the new inode 258 using its
orphan name "o258-10-0", then rename it to its final name of "file258"
and then issue a truncate operation for it. However this truncate
operation contains an incorrect name, which corresponds to the orphan
name and not to the final name, which makes the receiver fail. This
happens because when we attempt to compute the inode's current name
we verify that there's another inode with the same number (258) that
has its rmdir operation pending and because of that we generate an
orphan name for the new inode 258 (we do this in the function
get_cur_path()).
Fix this by not delayed the rename operation of an inode if it has parents
with the same number but different generations in both snapshots.
The following steps reproduce this example scenario.
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/dir257
$ mkdir /mnt/dir258
$ mkdir /mnt/dir259
$ mv /mnt/dir257 /mnt/dir258/dir257
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ mv /mnt/dir258/dir257 /mnt/dir257
$ rmdir /mnt/dir258
$ rmdir /mnt/dir259
# Remount the filesystem so that the next created inodes will have the
# numbers 258 and 259. This is because when a filesystem is mounted,
# btrfs sets the subvolume's inode counter to a value corresponding to
# the highest inode number in the subvolume plus 1. This inode counter
# is used to assign a unique number to each new inode and it's
# incremented by 1 after very inode creation.
# Note: we unmount and then mount instead of doing a mount with
# "-o remount" because otherwise the inode counter remains at value 260.
$ umount /mnt
$ mount /dev/sdb /mnt
$ touch /mnt/file258
$ mkdir /mnt/new_dir259
$ mv /mnt/dir257 /mnt/new_dir259/dir257
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs send /mnt/snap1 -f /tmp/1.snap
$ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap
$ umount /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ btrfs receive /mnt -f /tmo/1.snap
$ btrfs receive /mnt -f /tmo/2.snap -vv
receiving snapshot mysnap2 uuid=e059b6d1-7f55-f140-8d7c-9a3039d23c97, ctransid=10 parent_uuid=77e98cb6-8762-814f-9e05-e8ba877fc0b0, parent_ctransid=7
utimes
mkdir o259-10-0
rename dir258 -> o258-7-0
utimes
mkfile o258-10-0
rename o258-10-0 -> file258
utimes
truncate o258-10-0 size=0
ERROR: truncate o258-10-0 failed: No such file or directory
Reported-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Under certain situations, an incremental send operation can fail due to a
premature attempt to create a new top level inode (a direct child of the
subvolume/snapshot root) whose name collides with another inode that was
removed from the send snapshot.
Consider the following example scenario.
Parent snapshot:
. (ino 256, gen 8)
|---- a1/ (ino 257, gen 9)
|---- a2/ (ino 258, gen 9)
Send snapshot:
. (ino 256, gen 3)
|---- a2/ (ino 257, gen 7)
In this scenario, when receiving the incremental send stream, the btrfs
receive command fails like this (ran in verbose mode, -vv argument):
rmdir a1
mkfile o257-7-0
rename o257-7-0 -> a2
ERROR: rename o257-7-0 -> a2 failed: Is a directory
What happens when computing the incremental send stream is:
1) An operation to remove the directory with inode number 257 and
generation 9 is issued.
2) An operation to create the inode with number 257 and generation 7 is
issued. This creates the inode with an orphanized name of "o257-7-0".
3) An operation rename the new inode 257 to its final name, "a2", is
issued. This is incorrect because inode 258, which has the same name
and it's a child of the same parent (root inode 256), was not yet
processed and therefore no rmdir operation for it was yet issued.
The rename operation is issued because we fail to detect that the
name of the new inode 257 collides with inode 258, because their
parent, a subvolume/snapshot root (inode 256) has a different
generation in both snapshots.
So fix this by ignoring the generation value of a parent directory that
matches a root inode (number 256) when we are checking if the name of the
inode currently being processed collides with the name of some other
inode that was not yet processed.
We can achieve this scenario of different inodes with the same number but
different generation values either by mounting a filesystem with the inode
cache option (-o inode_cache) or by creating and sending snapshots across
different filesystems, like in the following example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/a1
$ mkdir /mnt/a2
$ btrfs subvolume snapshot -r /mnt /mnt/snap1
$ btrfs send /mnt/snap1 -f /tmp/1.snap
$ umount /mnt
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ touch /mnt/a2
$ btrfs subvolume snapshot -r /mnt /mnt/snap2
$ btrfs receive /mnt -f /tmp/1.snap
# Take note that once the filesystem is created, its current
# generation has value 7 so the inode from the second snapshot has
# a generation value of 7. And after receiving the first snapshot
# the filesystem is at a generation value of 10, because the call to
# create the second snapshot bumps the generation to 8 (the snapshot
# creation ioctl does a transaction commit), the receive command calls
# the snapshot creation ioctl to create the first snapshot, which bumps
# the filesystem's generation to 9, and finally when the receive
# operation finishes it calls an ioctl to transition the first snapshot
# (snap1) from RW mode to RO mode, which does another transaction commit
# and bumps the filesystem's generation to 10.
$ rm -f /tmp/1.snap
$ btrfs send /mnt/snap1 -f /tmp/1.snap
$ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap
$ umount /mnt
$ mkfs.btrfs -f /dev/sdd
$ mount /dev/sdd /mnt
$ btrfs receive /mnt /tmp/1.snap
# Receive of snapshot snap2 used to fail.
$ btrfs receive /mnt /tmp/2.snap
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Rewrote changelog to be more precise and clear]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
We're not taking into account that the space needed for the (variable
length) attr bitmap, with the result that we'd sometimes get a spurious
ERANGE when the ACL data got close to the end of a page.
Just add in an extra page to make sure.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Bitmap and attrlen follow immediately after the op reply header. This
was an oversight from commit bf118a342f.
Consequences of this are just minor efficiency (extra calls to
xdr_shrink_bufhead).
Fixes: bf118a342f "NFSv4: include bitmap in nfsv4 get acl data"
Reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The white space here seems slightly messed up.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For foreground gc, greedy algorithm should be adapted, which makes
this formula work well:
(2 * (100 / config.overprovision + 1) + 6)
But currently, we fg_gc have a prior to select bg_gc victim segments to gc
first, these victims are selected by cost-benefit algorithm, we can't guarantee
such segments have the small valid blocks, which may destroy the f2fs rule, on
the worstest case, would consume all the free segments.
This patch fix this by add a filter in check_bg_victims, if segment's has # of
valid blocks over overprovision ratio, skip such segments.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It turns out a stakable filesystem like sdcardfs in AOSP can trigger multiple
vfs_create() to lower filesystem. In that case, f2fs will add multiple dentries
having same name which breaks filesystem consistency.
Until upper layer fixes, let's work around by f2fs, which shows actually not
much performance regression.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We have had node chains, but haven't used it so far due to stale node blocks.
Now, we have crc|cp_ver in node footer and give random cp_ver at format time,
we can start to use it again.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In android, since SElinux is enable, security policy will be appliedd for
each file, it stores in inode as an xattr entry, so it will take one 4k
size node block additionally for each file.
Let's enable inline_xattr by default in order to save storage space.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces new mount option 'noinline_xattr', so we can disable
inline xattr functionality which is already set as a default mount option.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We've not seen this buggy case for a long time, so it's time to avoid this
unnecessary get_node_info() call which reading NAT page to cache nat entry.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently, if we call fsync after updating the xattr date belongs to the
file, f2fs needs to trigger checkpoint to keep xattr data consistent. But,
this policy cause low performance as checkpoint will block most foreground
operations and cause unneeded and unrelated IOs around checkpoint.
This patch will reuse regular file recovery policy for xattr node block,
so, we change to write xattr node block tagged with fsync flag to warm
area instead of cold area, and during recovery, we search warm node chain
for fsynced xattr block, and do the recovery.
So, for below application IO pattern, performance can be improved
obviously:
- touch file
- create/update/delete xattr entry in file
- fsync file
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Declare fscrypt_operations structure as const as it is only stored in
the s_cop field of a super_block structure. This field is of type const,
so fscrypt_operations structure having this property can be made const
too.
File size before: fs/f2fs/super.o
text data bss dec hex filename
54131 31355 184 85670 14ea6 fs/f2fs/super.o
File size after: fs/f2fs/super.o
text data bss dec hex filename
54227 31259 184 85670 14ea6 fs/f2fs/super.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If the cached bio has the last page's index, then we need to submit it.
Otherwise, we don't need to submit it and can wait for further IO merges.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We need to flush data writes before flushing last node block writes by using
FUA with PREFLUSH. We don't need to guarantee precedent node writes since if
those are not written, we can't reach to the last node block when scanning
node block chain during roll-forward recovery.
Afterwards f2fs_wait_on_page_writeback guarantees all the IO submission to
disk, which builds a valid node block chain.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch just moves write_node_page and introduces an inner function.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Andy Price wrote this patch to close a nasty race condition
that allows access to glocks that are being destroyed. Without
this patch, GFS2 is vulnerable to random corruption and kernel
panic.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYrv8+AAoJENeLYdPf93o7T58H/i3K+awecX1yrCl9qvAvxte+
UJioZd9wnrjHsprFkMMzeVC2rFH5EIm5JKEyl8zGGwIq/oaGtgWlxQsBOvyOnSyx
WRvu99XjZTzu3vov7u1kiWmOOvVturdcALPHH6mFdgkCw8d15AHqQdfDvljfWbRp
aHFc+x1evptskRTj4D7I6EeWig8v3Sr9qosJ2N8uKtsrcc/xIlh4ItsonlQh3Cz0
Dg83HVN2opHI5CWjRAjTK6zjF6XoEMgsjIOR4HLRVC9XEXiWLd3w+JBnTbFYJt0f
k8NMk8oGbmzTC/HteJvnzGuNfSlkk4RAwaCkYo7F9f6hcKsWPECzUdyHn3ubm7M=
=uIIs
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.11.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 fix from Bob Peterson:
"This is an addendum for the 4.11 merge window.
Andy Price wrote this patch to close a nasty race condition that
allows access to glocks that are being destroyed. Without this patch,
GFS2 is vulnerable to random corruption and kernel panic"
* tag 'gfs2-4.11.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Add missing rcu locking for glock lookup
We must hold the rcu read lock across looking up glocks and trying to
bump their refcount to prevent the glocks from being freed in between.
Cc: <stable@vger.kernel.org> # 4.3+
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch shows cached # of APPEND and UPDATE inode entries.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
1) Nine coding style warnings below have been resolved:
"Missing a blank line after declarations"
2) 435 coding style warnings below have been resolved:
"function definition argument 'x' should also have an identifier name"
3) Two coding style warnings below have been resolved:
"macros should not use a trailing semicolon"
Signed-off-by: DongOh Shin <doscode.kr@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Two coding style errors below have been resolved:
"Macros with complex values should be enclosed in parentheses"
And a coding style error below has been resolved:
"space prohibited before that ',' (ctx:WxW)"
Signed-off-by: DongOh Shin <doscode.kr@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch shows the fault injection mount option in
f2fs_show_options().
Signed-off-by: Kaixu Xia <xiakaixu@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We use following method to calculate size with current page index:
size = index << PAGE_SHIFT
If type of index has only 32-bits size, left shifting will incur overflow,
which makes result incorrect.
So let's cast index with 64-bits type to avoid such issue.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, in getxattr we will load all entries both in inline xattr and
xattr node block, and then do the lookup in all entries, but our lookup
flow shows low efficiency, since if we can lookup and hit in inline xattr
of inode page cache first, we don't need to load and lookup xattr node
block, which can obviously save cpu time and IO latency.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: initialize NULL to avoid warning]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
A dead loop can be triggered in f2fs_fiemap() using the test case
as below:
...
fd = open();
fallocate(fd, 0, 0, 4294967296);
ioctl(fd, FS_IOC_FIEMAP, fiemap_buf);
...
It's caused by an overflow in __get_data_block():
...
bh->b_size = map.m_len << inode->i_blkbits;
...
map.m_len is an unsigned int, and bh->b_size is a size_t which is 64 bits
on 64 bits archtecture, type conversion from an unsigned int to a size_t
will result in an overflow.
In the above-mentioned case, bh->b_size will be zero, and f2fs_fiemap()
will call get_data_block() at block 0 again an again.
Fix this by adding a force conversion before left shift.
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sheng Yong reports needless preallocation if write(small_buffer, large_size)
is called.
In that case, f2fs preallocates large_size, but vfs returns early due to
small_buffer size. Let's detect it before preallocation phase in f2fs.
Reported-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds stat information for flush and discard commands.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a kernel thread to issue discard commands.
It proposes three states, D_PREP, D_SUBMIT, and D_DONE to identify current
bio status.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Merge updates from Andrew Morton:
"142 patches:
- DAX updates
- various misc bits
- OCFS2 updates
- most of MM"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (142 commits)
mm/z3fold.c: limit first_num to the actual range of possible buddy indexes
mm: fix <linux/pagemap.h> stray kernel-doc notation
zram: remove obsolete sysfs attrs
mm/memblock.c: remove unnecessary log and clean up
oom-reaper: use madvise_dontneed() logic to decide if unmap the VMA
mm: drop unused argument of zap_page_range()
mm: drop zap_details::check_swap_entries
mm: drop zap_details::ignore_dirty
mm, page_alloc: warn_alloc nodemask is NULL when cpusets are disabled
mm: help __GFP_NOFAIL allocations which do not trigger OOM killer
mm, oom: do not enforce OOM killer for __GFP_NOFAIL automatically
mm: consolidate GFP_NOFAIL checks in the allocator slowpath
lib/show_mem.c: teach show_mem to work with the given nodemask
arch, mm: remove arch specific show_mem
mm, page_alloc: warn_alloc print nodemask
mm, page_alloc: do not report all nodes in show_mem
Revert "mm: bail out in shrink_inactive_list()"
mm, vmscan: consider eligible zones in get_scan_count
mm, vmscan: cleanup lru size claculations
mm, vmscan: do not count freed pages as PGDEACTIVATE
...
This patch adds discard_cmd_control with the existing discarding controls.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch simply cleans up the names for flush/discard commands.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a mirror for sit version bitmap, and use it to detect
in-memory bitmap corruption which may be caused by bit-transition of
cache or memory overflow.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a mirror for nat version bitmap, and use it to detect
in-memory bitmap corruption which may be caused by bit-transition of
cache or memory overflow.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a mirror for valid block bitmap, and use it to detect
in-memory bitmap corruption which may be caused by bit-transition of
cache or memory overflow.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a new flag to indicate inode status of doing atomic
write committing, so that, we can keep atomic write status for inode
during atomic committing, then we can skip GCing pages of atomic write inode,
that avoids random GCed datas being mixed with current transaction, so
isolation of transaction can be kept.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If there is no candidate to submit discard command during f2fs_trim_fs, let's
return without checkpoint.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- Various cleanups
- Livelock fixes for eofblocks scanning
- Improved input verification for on-disk metadata
- Fix races in the copy on write remap mechanism
- Fix buffer io error timeout controls
- Streamlining of directio copy on write
- Asynchronous discard support
- Fix asserts when splitting delalloc reservations
- Don't bloat bmbt when right shifting extents
- Inode alignment fixes for 32k block sizes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ga1F
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.11-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"Here are the XFS changes for 4.11. We aren't introducing any major
features in this release cycle except for this being the first merge
window I've managed on my own. :)
Changes since last update:
- Various cleanups
- Livelock fixes for eofblocks scanning
- Improved input verification for on-disk metadata
- Fix races in the copy on write remap mechanism
- Fix buffer io error timeout controls
- Streamlining of directio copy on write
- Asynchronous discard support
- Fix asserts when splitting delalloc reservations
- Don't bloat bmbt when right shifting extents
- Inode alignment fixes for 32k block sizes"
* tag 'xfs-4.11-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (39 commits)
xfs: remove XFS_ALLOCTYPE_ANY_AG and XFS_ALLOCTYPE_START_AG
xfs: simplify xfs_rtallocate_extent
xfs: tune down agno asserts in the bmap code
xfs: Use xfs_icluster_size_fsb() to calculate inode chunk alignment
xfs: don't reserve blocks for right shift transactions
xfs: fix len comparison in xfs_extent_busy_trim
xfs: fix uninitialized variable in _reflink_convert_cow
xfs: split indlen reservations fairly when under reserved
xfs: handle indlen shortage on delalloc extent merge
xfs: resurrect debug mode drop buffered writes mechanism
xfs: clear delalloc and cache on buffered write failure
xfs: don't block the log commit handler for discards
xfs: improve busy extent sorting
xfs: improve handling of busy extents in the low-level allocator
xfs: don't fail xfs_extent_busy allocation
xfs: correct null checks and error processing in xfs_initialize_perag
xfs: update ctime and mtime on clone destinatation inodes
xfs: allocate direct I/O COW blocks in iomap_begin
xfs: go straight to real allocations for direct I/O COW writes
xfs: return the converted extent in __xfs_reflink_convert_cow
...
On 32-bit powerpc the ELF PLT sections of binaries (built with
--bss-plt, or with a toolchain which defaults to it) look like this:
[17] .sbss NOBITS 0002aff8 01aff8 000014 00 WA 0 0 4
[18] .plt NOBITS 0002b00c 01aff8 000084 00 WAX 0 0 4
[19] .bss NOBITS 0002b090 01aff8 0000a4 00 WA 0 0 4
Which results in an ELF load header:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x019c70 0x00029c70 0x00029c70 0x01388 0x014c4 RWE 0x10000
This is all correct, the load region containing the PLT is marked as
executable. Note that the PLT starts at 0002b00c but the file mapping
ends at 0002aff8, so the PLT falls in the 0 fill section described by
the load header, and after a page boundary.
Unfortunately the generic ELF loader ignores the X bit in the load
headers when it creates the 0 filled non-file backed mappings. It
assumes all of these mappings are RW BSS sections, which is not the case
for PPC.
gcc/ld has an option (--secure-plt) to not do this, this is said to
incur a small performance penalty.
Currently, to support 32-bit binaries with PLT in BSS kernel maps
*entire brk area* with executable rights for all binaries, even
--secure-plt ones.
Stop doing that.
Teach the ELF loader to check the X bit in the relevant load header and
create 0 filled anonymous mappings that are executable if the load
header requests that.
Test program showing the difference in /proc/$PID/maps:
int main() {
char buf[16*1024];
char *p = malloc(123); /* make "[heap]" mapping appear */
int fd = open("/proc/self/maps", O_RDONLY);
int len = read(fd, buf, sizeof(buf));
write(1, buf, len);
printf("%p\n", p);
return 0;
}
Compiled using: gcc -mbss-plt -m32 -Os test.c -otest
Unpatched ppc64 kernel:
00100000-00120000 r-xp 00000000 00:00 0 [vdso]
0fe10000-0ffd0000 r-xp 00000000 fd:00 67898094 /usr/lib/libc-2.17.so
0ffd0000-0ffe0000 r--p 001b0000 fd:00 67898094 /usr/lib/libc-2.17.so
0ffe0000-0fff0000 rw-p 001c0000 fd:00 67898094 /usr/lib/libc-2.17.so
10000000-10010000 r-xp 00000000 fd:00 100674505 /home/user/test
10010000-10020000 r--p 00000000 fd:00 100674505 /home/user/test
10020000-10030000 rw-p 00010000 fd:00 100674505 /home/user/test
10690000-106c0000 rwxp 00000000 00:00 0 [heap]
f7f70000-f7fa0000 r-xp 00000000 fd:00 67898089 /usr/lib/ld-2.17.so
f7fa0000-f7fb0000 r--p 00020000 fd:00 67898089 /usr/lib/ld-2.17.so
f7fb0000-f7fc0000 rw-p 00030000 fd:00 67898089 /usr/lib/ld-2.17.so
ffa90000-ffac0000 rw-p 00000000 00:00 0 [stack]
0x10690008
Patched ppc64 kernel:
00100000-00120000 r-xp 00000000 00:00 0 [vdso]
0fe10000-0ffd0000 r-xp 00000000 fd:00 67898094 /usr/lib/libc-2.17.so
0ffd0000-0ffe0000 r--p 001b0000 fd:00 67898094 /usr/lib/libc-2.17.so
0ffe0000-0fff0000 rw-p 001c0000 fd:00 67898094 /usr/lib/libc-2.17.so
10000000-10010000 r-xp 00000000 fd:00 100674505 /home/user/test
10010000-10020000 r--p 00000000 fd:00 100674505 /home/user/test
10020000-10030000 rw-p 00010000 fd:00 100674505 /home/user/test
10180000-101b0000 rw-p 00000000 00:00 0 [heap]
^^^^ this has changed
f7c60000-f7c90000 r-xp 00000000 fd:00 67898089 /usr/lib/ld-2.17.so
f7c90000-f7ca0000 r--p 00020000 fd:00 67898089 /usr/lib/ld-2.17.so
f7ca0000-f7cb0000 rw-p 00030000 fd:00 67898089 /usr/lib/ld-2.17.so
ff860000-ff890000 rw-p 00000000 00:00 0 [stack]
0x10180008
The patch was originally posted in 2012 by Jason Gunthorpe
and apparently ignored:
https://lkml.org/lkml/2012/9/30/138
Lightly run-tested.
Link: http://lkml.kernel.org/r/20161215131950.23054-1-dvlasenk@redhat.com
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 4f52b6bb8c ("NFS: Don't call COMMIT in ->releasepage()"),
no tasks wait on PagePrivate.
Thus the wake introduced in commit 9590544694 ("NFS: avoid deadlocks
with loop-back mounted NFS filesystems.") can be removed.
Link: http://lkml.kernel.org/r/20170103182234.30141-2-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Expand the userfaultfd_register/unregister routines to allow shared
memory VMAs.
Currently, there is no UFFDIO_ZEROPAGE and write-protection support for
shared memory VMAs, which is reflected in ioctl methods supported by
uffdio_register.
Link: http://lkml.kernel.org/r/20161216144821.5183-34-aarcange@redhat.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Check whether a VMA can be used with userfault in more compact way
Link: http://lkml.kernel.org/r/20161216144821.5183-28-aarcange@redhat.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add routine userfaultfd_huge_must_wait which has the same functionality
as the existing userfaultfd_must_wait routine. Only difference is that
new routine must handle page table structure for hugepmd vmas.
Link: http://lkml.kernel.org/r/20161216144821.5183-24-aarcange@redhat.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Expand the userfaultfd_register/unregister routines to allow VM_HUGETLB
vmas. huge page alignment checking is performed after a VM_HUGETLB vma
is encountered.
Also, since there is no UFFDIO_ZEROPAGE support for huge pages do not
return that as a valid ioctl method for huge page ranges.
Link: http://lkml.kernel.org/r/20161216144821.5183-22-aarcange@redhat.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Userfaults may still happen after the userfaultfd monitor thread
received a UFFD_EVENT_MADVDONTNEED until UFFDIO_UNREGISTER is run.
Wake any pending userfault within UFFDIO_UNREGISTER protected by the
mmap_sem for writing, so they will not be reported to userland leading
to UFFDIO_COPY returning -EINVAL (as the range was already unregistered)
and they will not hang permanently either.
Link: http://lkml.kernel.org/r/20161216144821.5183-16-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the page is punched out of the address space the uffd reader should
know this and zeromap the respective area in case of the #PF event.
Link: http://lkml.kernel.org/r/20161216144821.5183-14-aarcange@redhat.com
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Optimize the mremap_userfaultfd_complete() interface to pass only the
vm_userfaultfd_ctx pointer through the stack as a microoptimization.
Link: http://lkml.kernel.org/r/20161216144821.5183-13-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The event denotes that an area [start:end] moves to different location.
Length change isn't reported as "new" addresses, if they appear on the
uffd reader side they will not contain any data and the latter can just
zeromap them.
Waiting for the event ACK is also done outside of mmap sem, as for fork
event.
Link: http://lkml.kernel.org/r/20161216144821.5183-12-aarcange@redhat.com
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit d2005e3f41 ("userfaultfd: don't pin the user memory in
userfaultfd_file_create()") userfaultfd uses mm_count rather than
mm_users to pin mm_struct.
Make dup_userfaultfd consistent with this behaviour
Link: http://lkml.kernel.org/r/20161216144821.5183-11-aarcange@redhat.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the mm with uffd-ed vmas fork()-s the respective vmas notify their
uffds with the event which contains a descriptor with new uffd. This
new descriptor can then be used to get events from the child and
populate its mm with data. Note, that there can be different uffd-s
controlling different vmas within one mm, so first we should collect all
those uffds (and ctx-s) in a list and then notify them all one by one
but only once per fork().
The context is created at fork() time but the descriptor, file struct
and anon inode object is created at event read time. So some trickery
is added to the userfaultfd_ctx_read() to handle the ctx queues' locking
vs file creation.
Another thing worth noticing is that the task that fork()-s waits for
the uffd event to get processed WITHOUT the mmap sem.
[aarcange@redhat.com: build warning fix]
Link: http://lkml.kernel.org/r/20161216144821.5183-10-aarcange@redhat.com
Link: http://lkml.kernel.org/r/20161216144821.5183-9-aarcange@redhat.com
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This will allow userland to probe all features available in the kernel.
It will however only enable the requested features in the open userfaultfd
context.
Link: http://lkml.kernel.org/r/20161216144821.5183-8-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The custom events are queued in ctx->event_wqh not to disturb the
fast-path-ed PF queue-wait-wakeup functions.
The events to be generated (other than PF-s) are requested in UFFD_API
ioctl with the uffd_api.features bits. Those, known by the kernel, are
then turned on and reported back to the user-space.
Link: http://lkml.kernel.org/r/20161216144821.5183-7-aarcange@redhat.com
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I will need one to lookup for userfaultfd_wait_queue-s in different
wait queue
Link: http://lkml.kernel.org/r/20161216144821.5183-6-aarcange@redhat.com
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cleanup the vma->vm_ops usage.
Side note: it would be more robust if vma_is_anonymous() would also
check that vm_flags hasn't VM_PFNMAP set.
Link: http://lkml.kernel.org/r/20161216144821.5183-5-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoid BUG_ON()s and only WARN instead. This is just a cleanup, it can't
make any runtime difference. This BUG_ON has never triggered and cannot
trigger.
Link: http://lkml.kernel.org/r/20161216144821.5183-4-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minor comment correction.
Link: http://lkml.kernel.org/r/20161216144821.5183-3-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
posix_acl_update_mode() could possibly clear 'acl', if so we leak the
memory pointed by 'acl'. Save this pointer before calling
posix_acl_update_mode() and release the memory if 'acl' really gets
cleared.
Link: http://lkml.kernel.org/r/1486678332-2430-1-git-send-email-xiyou.wangcong@gmail.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reported-by: Mark Salyzyn <salyzyn@android.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Greg Kurz <groug@kaod.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 743b5f1434 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
results in a deadlock, as the author "Tariq Saeed" realized shortly
after the patch was merged. The discussion happened here
https://oss.oracle.com/pipermail/ocfs2-devel/2015-September/011085.html
The reason why taking cluster inode lock at vfs entry points opens up a
self deadlock window, is explained in the previous patch of this series.
So far, we have seen two different code paths that have this issue.
1. do_sys_open
may_open
inode_permission
ocfs2_permission
ocfs2_inode_lock() <=== take PR
generic_permission
get_acl
ocfs2_iop_get_acl
ocfs2_inode_lock() <=== take PR
2. fchmod|fchmodat
chmod_common
notify_change
ocfs2_setattr <=== take EX
posix_acl_chmod
get_acl
ocfs2_iop_get_acl <=== take PR
ocfs2_iop_set_acl <=== take EX
Fixes them by adding the tracking logic (in the previous patch) for these
funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(),
ocfs2_setattr().
Link: http://lkml.kernel.org/r/20170117100948.11657-3-zren@suse.com
Signed-off-by: Eric Ren <zren@suse.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are in the situation that we have to avoid recursive cluster locking,
but there is no way to check if a cluster lock has been taken by a precess
already.
Mostly, we can avoid recursive locking by writing code carefully.
However, we found that it's very hard to handle the routines that are
invoked directly by vfs code. For instance:
const struct inode_operations ocfs2_file_iops = {
.permission = ocfs2_permission,
.get_acl = ocfs2_iop_get_acl,
.set_acl = ocfs2_iop_set_acl,
};
Both ocfs2_permission() and ocfs2_iop_get_acl() call ocfs2_inode_lock(PR):
do_sys_open
may_open
inode_permission
ocfs2_permission
ocfs2_inode_lock() <=== first time
generic_permission
get_acl
ocfs2_iop_get_acl
ocfs2_inode_lock() <=== recursive one
A deadlock will occur if a remote EX request comes in between two of
ocfs2_inode_lock(). Briefly describe how the deadlock is formed:
On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
BAST(ocfs2_generic_handle_bast) when downconvert is started on behalf of
the remote EX lock request. Another hand, the recursive cluster lock
(the second one) will be blocked in in __ocfs2_cluster_lock() because of
OCFS2_LOCK_BLOCKED. But, the downconvert never complete, why? because
there is no chance for the first cluster lock on this node to be
unlocked - we block ourselves in the code path.
The idea to fix this issue is mostly taken from gfs2 code.
1. introduce a new field: struct ocfs2_lock_res.l_holders, to keep track
of the processes' pid who has taken the cluster lock of this lock
resource;
2. introduce a new flag for ocfs2_inode_lock_full:
OCFS2_META_LOCK_GETBH; it means just getting back disk inode bh for
us if we've got cluster lock.
3. export a helper: ocfs2_is_locked_by_me() is used to check if we have
got the cluster lock in the upper code path.
The tracking logic should be used by some of the ocfs2 vfs's callbacks,
to solve the recursive locking issue cuased by the fact that vfs
routines can call into each other.
The performance penalty of processing the holder list should only be
seen at a few cases where the tracking logic is used, such as get/set
acl.
You may ask what if the first time we got a PR lock, and the second time
we want a EX lock? fortunately, this case never happens in the real
world, as far as I can see, including permission check,
(get|set)_(acl|attr), and the gfs2 code also do so.
[sfr@canb.auug.org.au remove some inlines]
Link: http://lkml.kernel.org/r/20170117100948.11657-2-zren@suse.com
Signed-off-by: Eric Ren <zren@suse.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pmd_fault() and related functions really only need the vmf parameter since
the additional parameters are all included in the vmf struct. Remove the
additional parameter and simplify pmd_fault() and friends.
Link: http://lkml.kernel.org/r/1484085142-2297-8-git-send-email-ross.zwisler@linux.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of passing in multiple parameters in the pmd_fault() handler,
a vmf can be passed in just like a fault() handler. This will simplify
code and remove the need for the actual pmd fault handlers to allocate a
vmf. Related functions are also modified to do the same.
[dave.jiang@intel.com: fix issue with xfs_tests stall when DAX option is off]
Link: http://lkml.kernel.org/r/148469861071.195597.3619476895250028518.stgit@djiang5-desk3.ch.intel.com
Link: http://lkml.kernel.org/r/1484085142-2297-7-git-send-email-ross.zwisler@linux.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tracepoints are the standard way to capture debugging and tracing
information in many parts of the kernel, including the XFS and ext4
filesystems. Create a tracepoint header for FS DAX and add the first DAX
tracepoints to the PMD fault handler. This allows the tracing for DAX to
be done in the same way as the filesystem tracing so that developers can
look at them together and get a coherent idea of what the system is doing.
I added both an entry and exit tracepoint because future patches will add
tracepoints to child functions of dax_iomap_pmd_fault() like
dax_pmd_load_hole() and dax_pmd_insert_mapping(). We want those messages
to be wrapped by the parent function tracepoints so the code flow is more
easily understood. Having entry and exit tracepoints for faults also
allows us to easily see what filesystems functions were called during the
fault. These filesystem functions get executed via iomap_begin() and
iomap_end() calls, for example, and will have their own tracepoints.
For PMD faults we primarily want to understand the type of mapping, the
fault flags, the faulting address and whether it fell back to 4k faults.
If it fell back to 4k faults the tracepoints should let us understand why.
I named the new tracepoint header file "fs_dax.h" to allow for device DAX
to have its own separate tracing header in the same directory at some
point.
Here is an example output for these events from a successful PMD fault:
big-1441 [005] .... 32.582758: xfs_filemap_pmd_fault: dev 259:0 ino 0x1003
big-1441 [005] .... 32.582776: dax_pmd_fault: dev 259:0 ino 0x1003
shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400
big-1441 [005] .... 32.583292: dax_pmd_fault_done: dev 259:0 ino 0x1003
shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 NOPAGE
Link: http://lkml.kernel.org/r/1484085142-2297-3-git-send-email-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
'BTRFS_ORDERED_REGULAR' was introduced for the cow case in patch
'Btrfs: specify a new ordered extent type for create_io_em',
but it missed the directIO cow case.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
The f2fs_trim_fs() doesn't need to do checkpoint if there are newly allocated
data blocks only which didn't change the critical checkpoint data such as nat
and sit entries.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit 2cf10cdd48.
The patch has been seen to cause excessive looping.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # 4.10+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Here is the "small" driver core patches for 4.11-rc1.
Not much here, some firmware documentation and self-test updates, a
debugfs code formatting issue, and a new feature for call_usermodehelper
to make it more robust on systems that want to lock it down in a more
secure way.
All of these have been linux-next for a while now with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2jKg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymCEACgozYuqZZ/TUGW0P3xVNi7fbfUWCEAn3nYExrc
XgevqeYOSKp2We6X/2JX
=aZ+5
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "small" driver core patches for 4.11-rc1.
Not much here, some firmware documentation and self-test updates, a
debugfs code formatting issue, and a new feature for call_usermodehelper
to make it more robust on systems that want to lock it down in a more
secure way.
All of these have been linux-next for a while now with no reported
issues"
* tag 'driver-core-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kernfs: handle null pointers while printing node name and path
Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper()
Make static usermode helper binaries constant
kmod: make usermodehelper path a const string
firmware: revamp firmware documentation
selftests: firmware: send expected errors to /dev/null
selftests: firmware: only modprobe if driver is missing
platform: Print the resource range if device failed to claim
kref: prefer atomic_inc_not_zero to atomic_add_unless
debugfs: improve formatting of debugfs_real_fops()
struct fuse_file is stored in file->private_data. Make this always be a
counting reference for consistency.
This also allows fuse_sync_release() to call fuse_file_put() instead of
partially duplicating its functionality.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_file_put() was missing the "force" flag for the RELEASE request when
sending synchronously (fuseblk).
If this flag is not set, then a sync request may be interrupted before it
is dequeued by the userspace filesystem. In this case the OPEN won't be
balanced with a RELEASE.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 5a18ec176c ("fuse: fix hang of single threaded fuseblk filesystem")
Cc: <stable@vger.kernel.org> # v2.6.38+
Copy offload code needs to be hooked into the code for handling
NFS4ERR_BAD_STATEID by ensuring that we set the "stateid" field
in struct nfs4_exception.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 2e72448b07 ("NFS: Add COPY nfs operation")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Pull networking updates from David Miller:
"Highlights:
1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
Varadhan.
2) Simplify classifier state on sk_buff in order to shrink it a bit.
From Willem de Bruijn.
3) Introduce SIPHASH and it's usage for secure sequence numbers and
syncookies. From Jason A. Donenfeld.
4) Reduce CPU usage for ICMP replies we are going to limit or
suppress, from Jesper Dangaard Brouer.
5) Introduce Shared Memory Communications socket layer, from Ursula
Braun.
6) Add RACK loss detection and allow it to actually trigger fast
recovery instead of just assisting after other algorithms have
triggered it. From Yuchung Cheng.
7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.
8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.
9) Export MPLS packet stats via netlink, from Robert Shearman.
10) Significantly improve inet port bind conflict handling, especially
when an application is restarted and changes it's setting of
reuseport. From Josef Bacik.
11) Implement TX batching in vhost_net, from Jason Wang.
12) Extend the dummy device so that VF (virtual function) features,
such as configuration, can be more easily tested. From Phil
Sutter.
13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
Dumazet.
14) Add new bpf MAP, implementing a longest prefix match trie. From
Daniel Mack.
15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.
16) Add new aquantia driver, from David VomLehn.
17) Add bpf tracepoints, from Daniel Borkmann.
18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
Florian Fainelli.
19) Remove custom busy polling in many drivers, it is done in the core
networking since 4.5 times. From Eric Dumazet.
20) Support XDP adjust_head in virtio_net, from John Fastabend.
21) Fix several major holes in neighbour entry confirmation, from
Julian Anastasov.
22) Add XDP support to bnxt_en driver, from Michael Chan.
23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.
24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.
25) Support GRO in IPSEC protocols, from Steffen Klassert"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
Revert "ath10k: Search SMBIOS for OEM board file extension"
net: socket: fix recvmmsg not returning error from sock_error
bnxt_en: use eth_hw_addr_random()
bpf: fix unlocking of jited image when module ronx not set
arch: add ARCH_HAS_SET_MEMORY config
net: napi_watchdog() can use napi_schedule_irqoff()
tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
net/hsr: use eth_hw_addr_random()
net: mvpp2: enable building on 64-bit platforms
net: mvpp2: switch to build_skb() in the RX path
net: mvpp2: simplify MVPP2_PRS_RI_* definitions
net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
net: mvpp2: remove unused register definitions
net: mvpp2: simplify mvpp2_bm_bufs_add()
net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
net: mvpp2: release reference to txq_cpu[] entry after unmapping
net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
...
If we see that our pNFS READ/WRITE/COMMIT operation failed, but we
also see that our layout segment is no longer valid, then we need to
get a new layout segment before retrying.
Fixes: 90816d1dda ("NFSv4.1/flexfiles: Don't mark the entire deviceid...")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We shouldn't need to force callers to carry an unused argument.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Account for the "space_limit" field in struct open_write_delegation4.
Fixes: 2cebf82883 ("NFSv4: Fix the underestimate of NFSv4 open request size")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Also ensure that we always check that the size of the decoded object
matches the expectation that it must be smaller than NFS4_OPAQUE_LIMIT.
This should be true for all the current users of decode_opaque_inline(),
including decode_ace(), decode_pathname(), decode_attr_fs_locations()
and decode_exchange_id().
Note that this allows us to get rid of a number of existing checks in
decode_exchange_id(),
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Pull security layer updates from James Morris:
"Highlights:
- major AppArmor update: policy namespaces & lots of fixes
- add /sys/kernel/security/lsm node for easy detection of loaded LSMs
- SELinux cgroupfs labeling support
- SELinux context mounts on tmpfs, ramfs, devpts within user
namespaces
- improved TPM 2.0 support"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (117 commits)
tpm: declare tpm2_get_pcr_allocation() as static
tpm: Fix expected number of response bytes of TPM1.2 PCR Extend
tpm xen: drop unneeded chip variable
tpm: fix misspelled "facilitate" in module parameter description
tpm_tis: fix the error handling of init_tis()
KEYS: Use memzero_explicit() for secret data
KEYS: Fix an error code in request_master_key()
sign-file: fix build error in sign-file.c with libressl
selinux: allow changing labels for cgroupfs
selinux: fix off-by-one in setprocattr
tpm: silence an array overflow warning
tpm: fix the type of owned field in cap_t
tpm: add securityfs support for TPM 2.0 firmware event log
tpm: enhance read_log_of() to support Physical TPM event log
tpm: enhance TPM 2.0 PCR extend to support multiple banks
tpm: implement TPM 2.0 capability to get active PCR banks
tpm: fix RC value check in tpm2_seal_trusted
tpm_tis: fix iTPM probe via probe_itpm() function
tpm: Begin the process to deprecate user_read_timer
tpm: remove tpm_read_index and tpm_write_index from tpm.h
...
The release callback may be called from two places - file release
operation and kernfs open file draining. kernfs_open_file->mutex is
used to synchronize the two callsites. This unfortunately leads to
possible circular locking because of->mutex is used to protect the
usual kernfs operations which may use locking constructs which are
held while removing and thus draining kernfs files.
@of->mutex is for synchronizing concurrent kernfs access operations
and all we need here is synchronization between the releaes and drain
paths. As the drain path has to grab kernfs_open_file_mutex anyway,
let's use the mutex to synchronize the release operation instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Tony Lindgren <tony@atomide.com>
Fixes: 0e67db2f9f ("kernfs: add kernfs_ops->open/release() callbacks")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a device gets removed, block device inode unhashed so that it is not
used anymore (bdget() will not find it anymore). Later when a new device
gets created with the same device number, we create new block device
inode. However there may be file system device inodes whose i_bdev still
points to the original block device inode and thus we get two active
block device inodes for the same device. They will share the same
gendisk so the only visible differences will be that page caches will
not be coherent and BDIs will be different (the old block device inode
still points to unregistered BDI).
Fix the problem by checking in bd_acquire() whether i_bdev still points
to active block device inode and re-lookup the block device if not. That
way any open of a block device happening after the old device has been
removed will get correct block device inode.
Tested-by: Lekshmi Pillai <lekshmicpillai@in.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> writes:
> This patch has locking problem. I've got lockdep splat under LTP.
>
> [ 6633.115456] ======================================================
> [ 6633.115502] [ INFO: possible circular locking dependency detected ]
> [ 6633.115553] 4.9.10-debug+ #9 Tainted: G L
> [ 6633.115584] -------------------------------------------------------
> [ 6633.115627] ksm02/284980 is trying to acquire lock:
> [ 6633.115659] (&sb->s_type->i_lock_key#4){+.+...}, at: [<ffffffff816bc1ce>] igrab+0x1e/0x80
> [ 6633.115834] but task is already holding lock:
> [ 6633.115882] (sysctl_lock){+.+...}, at: [<ffffffff817e379b>] unregister_sysctl_table+0x6b/0x110
> [ 6633.116026] which lock already depends on the new lock.
> [ 6633.116026]
> [ 6633.116080]
> [ 6633.116080] the existing dependency chain (in reverse order) is:
> [ 6633.116117]
> -> #2 (sysctl_lock){+.+...}:
> -> #1 (&(&dentry->d_lockref.lock)->rlock){+.+...}:
> -> #0 (&sb->s_type->i_lock_key#4){+.+...}:
>
> d_lock nests inside i_lock
> sysctl_lock nests inside d_lock in d_compare
>
> This patch adds i_lock nesting inside sysctl_lock.
Al Viro <viro@ZenIV.linux.org.uk> replied:
> Once ->unregistering is set, you can drop sysctl_lock just fine. So I'd
> try something like this - use rcu_read_lock() in proc_sys_prune_dcache(),
> drop sysctl_lock() before it and regain after. Make sure that no inodes
> are added to the list ones ->unregistering has been set and use RCU list
> primitives for modifying the inode list, with sysctl_lock still used to
> serialize its modifications.
>
> Freeing struct inode is RCU-delayed (see proc_destroy_inode()), so doing
> igrab() is safe there. Since we don't drop inode reference until after we'd
> passed beyond it in the list, list_for_each_entry_rcu() should be fine.
I agree with Al Viro's analsysis of the situtation.
Fixes: d6cffbbe9a ("proc/sysctl: prune stale dentries during unregistering")
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Tested-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=z7AL
-----END PGP SIGNATURE-----
Merge tag 'for-4.11/linus-merge-signed' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
- blk-mq scheduling framework from me and Omar, with a port of the
deadline scheduler for this framework. A port of BFQ from Paolo is in
the works, and should be ready for 4.12.
- Various fixups and improvements to the above scheduling framework
from Omar, Paolo, Bart, me, others.
- Cleanup of the exported sysfs blk-mq data into debugfs, from Omar.
This allows us to export more information that helps debug hangs or
performance issues, without cluttering or abusing the sysfs API.
- Fixes for the sbitmap code, the scalable bitmap code that was
migrated from blk-mq, from Omar.
- Removal of the BLOCK_PC support in struct request, and refactoring of
carrying SCSI payloads in the block layer. This cleans up the code
nicely, and enables us to kill the SCSI specific parts of struct
request, shrinking it down nicely. From Christoph mainly, with help
from Hannes.
- Support for ranged discard requests and discard merging, also from
Christoph.
- Support for OPAL in the block layer, and for NVMe as well. Mainly
from Scott Bauer, with fixes/updates from various others folks.
- Error code fixup for gdrom from Christophe.
- cciss pci irq allocation cleanup from Christoph.
- Making the cdrom device operations read only, from Kees Cook.
- Fixes for duplicate bdi registrations and bdi/queue life time
problems from Jan and Dan.
- Set of fixes and updates for lightnvm, from Matias and Javier.
- A few fixes for nbd from Josef, using idr to name devices and a
workqueue deadlock fix on receive. Also marks Josef as the current
maintainer of nbd.
- Fix from Josef, overwriting queue settings when the number of
hardware queues is updated for a blk-mq device.
- NVMe fix from Keith, ensuring that we don't repeatedly mark and IO
aborted, if we didn't end up aborting it.
- SG gap merging fix from Ming Lei for block.
- Loop fix also from Ming, fixing a race and crash between setting loop
status and IO.
- Two block race fixes from Tahsin, fixing request list iteration and
fixing a race between device registration and udev device add
notifiations.
- Double free fix from cgroup writeback, from Tejun.
- Another double free fix in blkcg, from Hou Tao.
- Partition overflow fix for EFI from Alden Tondettar.
* tag 'for-4.11/linus-merge-signed' of git://git.kernel.dk/linux-block: (156 commits)
nvme: Check for Security send/recv support before issuing commands.
block/sed-opal: allocate struct opal_dev dynamically
block/sed-opal: tone down not supported warnings
block: don't defer flushes on blk-mq + scheduling
blk-mq-sched: ask scheduler for work, if we failed dispatching leftovers
blk-mq: don't special case flush inserts for blk-mq-sched
blk-mq-sched: don't add flushes to the head of requeue queue
blk-mq: have blk_mq_dispatch_rq_list() return if we queued IO or not
block: do not allow updates through sysfs until registration completes
lightnvm: set default lun range when no luns are specified
lightnvm: fix off-by-one error on target initialization
Maintainers: Modify SED list from nvme to block
Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN
uapi: sed-opal fix IOW for activate lsp to use correct struct
cdrom: Make device operations read-only
elevator: fix loading wrong elevator type for blk-mq devices
cciss: switch to pci_irq_alloc_vectors
block/loop: fix race between I/O and set_status
blk-mq-sched: don't hold queue_lock when calling exit_icq
block: set make_request_fn manually in blk_mq_update_nr_hw_queues
...
1. Andy Price submitted a patch to make gfs2_write_full_page a
static function.
2. Dan Carpenter submitted a patch to fix a ERR_PTR thinko.
I've also got a few patches, three of which fix bugs related to
deleting very large files, which cause GFS2 to run out of
journal space:
3. The first one prevents GFS2 delete operation from requesting too
much journal space.
4. The second one fixes a problem whereby GFS2 can hang because it
wasn't taking journal space demand into its calculations.
5. The third one wakes up IO waiters when a flush is done to restart
processes stuck waiting for journal space to become available.
The other three patches are a performance improvement related to
spin_lock contention between multiple writers:
6. The "tr_touched" variable was switched to a flag to be more atomic
and eliminate the possibility of some races.
7. Function meta_lo_add was moved inline with its only caller to make
the code more readable and efficient.
8. Contention on the gfs2_log_lock spinlock was greatly reduced by
avoiding the lock altogether in cases where we don't really need
it: buffers that already appear in the appropriate metadata list
for the journal. Many thanks to Steve Whitehouse for the ideas and
principles behind these patches.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYrEEEAAoJENeLYdPf93o7bjoIAIqPG/EAzi+idgMWDPQa9Eit
53dPy16snkrbWwtaK6spSWlH6bGYuHeanXORYon9bvtVjKYaa4NQclGihN2IE6uB
O8zT+MGwP45LDhNplVJpumaOALZ9ZDqQSe+3tHeNK3FhNirLyiIjSqrHt/7Yi1qi
fPLlT4Jx0TBo5rhvEGa7Yg01WhWVtnmVSMqJXj/7ZtC50s1aPyDUikdNIDfDCN2X
LxfKGDXuk6p63VQ6JKqYSBVATCR0/bbKfkuk/kBUTYLoHoapImxB8d0HgIdsh1Mv
9PlbZnnNW8k5oapuhVxjl0T5G0JsQgCkPb/wlte+ryOCjBoc2L2fCUV5qc0QxWc=
=xQyl
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.11.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Robert Peterson:
"We've got eight GFS2 patches for this merge window:
- Andy Price submitted a patch to make gfs2_write_full_page a static
function.
- Dan Carpenter submitted a patch to fix a ERR_PTR thinko.
Three patches fix bugs related to deleting very large files, which
cause GFS2 to run out of journal space:
- The first one prevents GFS2 delete operation from requesting too
much journal space.
- The second one fixes a problem whereby GFS2 can hang because it
wasn't taking journal space demand into its calculations.
- The third one wakes up IO waiters when a flush is done to restart
processes stuck waiting for journal space to become available.
The final three patches are a performance improvement related to
spin_lock contention between multiple writers:
- The "tr_touched" variable was switched to a flag to be more atomic
and eliminate the possibility of some races.
- Function meta_lo_add was moved inline with its only caller to make
the code more readable and efficient.
- Contention on the gfs2_log_lock spinlock was greatly reduced by
avoiding the lock altogether in cases where we don't really need
it: buffers that already appear in the appropriate metadata list
for the journal. Many thanks to Steve Whitehouse for the ideas and
principles behind these patches"
* tag 'gfs2-4.11.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Make gfs2_write_full_page static
GFS2: Reduce contention on gfs2_log_lock
GFS2: Inline function meta_lo_add
GFS2: Switch tr_touched to flag in transaction
GFS2: Wake up io waiters whenever a flush is done
GFS2: Made logd daemon take into account log demand
GFS2: Limit number of transaction blocks requested for truncates
GFS2: Fix reference to ERR_PTR in gfs2_glock_iter_next
Pull UDF fixes and cleanups from Jan Kara:
"Several small UDF fixes and cleanups and a small cleanup of fanotify
code"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: simplify the code of fanotify_merge
udf: simplify udf_ioctl()
udf: fix ioctl errors
udf: allow implicit blocksize specification during mount
udf: check partition reference in udf_read_inode()
udf: atomically read inode size
udf: merge module informations in super.c
udf: remove next_epos from udf_update_extent_cache()
udf: Factor out trimming of crtime
udf: remove empty condition
udf: remove unneeded line break
udf: merge bh free
udf: use pointer for kernel_long_ad argument
udf: use __packed instead of __attribute__ ((packed))
udf: Make stat on symlink report symlink length as st_size
fs/udf: make #ifdef UDF_PREALLOCATE unconditional
fs: udf: Replace CURRENT_TIME with current_time()
Both the NFS protocols and the Linux VFS use a setattr operation with a
bitmap of attributes to set to set various file attributes including the
file size and the uid/gid.
The Linux syscalls never mix size updates with unrelated updates like
the uid/gid, and some file systems like XFS and GFS2 rely on the fact
that truncates don't update random other attributes, and many other file
systems handle the case but do not update the other attributes in the
same transaction. NFSD on the other hand passes the attributes it gets
on the wire more or less directly through to the VFS, leading to updates
the file systems don't expect. XFS at least has an assert on the
allowed attributes, which caught an unusual NFS client setting the size
and group at the same time.
To handle this issue properly this splits the notify_change call in
nfsd_setattr into two separate ones.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull CIFS/SMB3 updates from Steve French:
"Includes support for a critical SMB3 security feature: per-share
encryption from Pavel, and a cleanup from Jean Delvare.
Will have another cifs/smb3 merge next week"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Allow to switch on encryption with seal mount option
CIFS: Add capability to decrypt big read responses
CIFS: Decrypt and process small encrypted packets
CIFS: Add copy into pages callback for a read operation
CIFS: Add mid handle callback
CIFS: Add transform header handling callbacks
CIFS: Encrypt SMB3 requests before sending
CIFS: Enable encryption during session setup phase
CIFS: Add capability to transform requests before sending
CIFS: Separate RFC1001 length processing for SMB2 read
CIFS: Separate SMB2 sync header processing
CIFS: Send RFC1001 length in a separate iov
CIFS: Make send_cancel take rqst as argument
CIFS: Make SendReceive2() takes resp iov
CIFS: Separate SMB2 header structure
CIFS: Fix splice read for non-cached files
cifs: Add soft dependencies
cifs: Only select the required crypto modules
cifs: Simplify SMB2 and SMB311 dependencies
primarily used for testing, but which can be useful on production
systems when a scratch volume is being destroyed and the data on it
doesn't need to be saved. This found (and we fixed) a number of bugs
with ext4's recovery to corrupted file system --- the bugs increased
the amount of data that could be potentially lost, and in the case of
the inline data feature, could cause the kernel to BUG.
Also included are a number of other bug fixes, including in ext4's
fscrypt, DAX, inline data support.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlirXesACgkQ8vlZVpUN
gaMOzQf8Ct6uPatV+m855oR4dAbZr2+lY4A4C+vHDzBtSMkPRyLX8cuo8XcwfTIm
vPVyDnL6EPyhXPxxfItu+92wAq1m5mVpKo57d0Ft5lw0rHxNtJTgVSRzsQ7VDRjj
5qMHW2K7Bk7EjzTeW3SF8/3+hqpzkAvRtNCntcomk5h08+cWMC8JSnn1kqw+naIn
EcbrC72GZb8JUELogVXC2vU58lp50SSBdr3l005jqKc5BvljMvdJ0Izn/3RVyU7u
q7vtynhe2ScFcHe/UzL1QgmQOy32tJpbS0NHalW47aw3Ynmn4cSX0YhhT9FDjRNQ
VOOfo1m1sAg166x0E+Nn7FeghTSSyA==
=cPIf
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"For this cycle we add support for the shutdown ioctl, which is
primarily used for testing, but which can be useful on production
systems when a scratch volume is being destroyed and the data on it
doesn't need to be saved.
This found (and we fixed) a number of bugs with ext4's recovery to
corrupted file system --- the bugs increased the amount of data that
could be potentially lost, and in the case of the inline data feature,
could cause the kernel to BUG.
Also included are a number of other bug fixes, including in ext4's
fscrypt, DAX, inline data support"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits)
ext4: rename EXT4_IOC_GOINGDOWN to EXT4_IOC_SHUTDOWN
ext4: fix fencepost in s_first_meta_bg validation
ext4: don't BUG when truncating encrypted inodes on the orphan list
ext4: do not use stripe_width if it is not set
ext4: fix stripe-unaligned allocations
dax: assert that i_rwsem is held exclusive for writes
ext4: fix DAX write locking
ext4: add EXT4_IOC_GOINGDOWN ioctl
ext4: add shutdown bit and check for it
ext4: rename s_resize_flags to s_ext4_flags
ext4: return EROFS if device is r/o and journal replay is needed
ext4: preserve the needs_recovery flag when the journal is aborted
jbd2: don't leak modified metadata buffers on an aborted journal
ext4: fix inline data error paths
ext4: move halfmd4 into hash.c directly
ext4: fix use-after-iput when fscrypt contexts are inconsistent
jbd2: fix use after free in kjournald2()
ext4: fix data corruption in data=journal mode
ext4: trim allocation requests to group size
ext4: replace BUG_ON with WARN_ON in mb_find_extent()
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlirP6wACgkQ8vlZVpUN
gaMwpQgApR67CxzlstxYjZpWPAqC8McJ2FBDX+mCOle5Vkc1WQDklwr0oCfQThTj
eDSFRhNfIvyPh0DJ589PxBCsWOqN5h6Si7hD5ZinomVNI+IL89OytaU5EV2OpWaW
iKdJgO9Tm8U7LuY6FOIoVdX57kUXVdkWoj61rC056B1SNhnNiVeofi7lYDM8Ix4q
IGSQ9W24iQKmCk4hCwgObhJBRK9RnlOH0GLUmpMaS+jnfnj/uePwdxWEFsPuCOob
8acAJ49lr55kjIw79E0BAyWxhEZ2aiArHk8PaWynT/DyNq3ftcapPlpftoeba8vo
glBJRX70QxPvt0iHEp0ykfExkhWhFA==
=Joki
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Various cleanups for the file system encryption feature"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: constify struct fscrypt_operations
fscrypt: properly declare on-stack completion
fscrypt: split supp and notsupp declarations into their own headers
fscrypt: remove redundant assignment of res
fscrypt: make fscrypt_operations.key_prefix a string
fscrypt: remove unused 'mode' member of fscrypt_ctx
ext4: don't allow encrypted operations without keys
fscrypt: make test_dummy_encryption require a keyring key
fscrypt: factor out bio specific functions
fscrypt: pass up error codes from ->get_context()
fscrypt: remove user-triggerable warning messages
fscrypt: use EEXIST when file already uses different policy
fscrypt: use ENOTDIR when setting encryption policy on nondirectory
fscrypt: use ENOKEY when file cannot be created w/o key
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Implement wraparound-safe refcount_t and kref_t types based on
generic atomic primitives (Peter Zijlstra)
- Improve and fix the ww_mutex code (Nicolai Hähnle)
- Add self-tests to the ww_mutex code (Chris Wilson)
- Optimize percpu-rwsems with the 'rcuwait' mechanism (Davidlohr
Bueso)
- Micro-optimize the current-task logic all around the core kernel
(Davidlohr Bueso)
- Tidy up after recent optimizations: remove stale code and APIs,
clean up the code (Waiman Long)
- ... plus misc fixes, updates and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
fork: Fix task_struct alignment
locking/spinlock/debug: Remove spinlock lockup detection code
lockdep: Fix incorrect condition to print bug msgs for MAX_LOCKDEP_CHAIN_HLOCKS
lkdtm: Convert to refcount_t testing
kref: Implement 'struct kref' using refcount_t
refcount_t: Introduce a special purpose refcount type
sched/wake_q: Clarify queue reinit comment
sched/wait, rcuwait: Fix typo in comment
locking/mutex: Fix lockdep_assert_held() fail
locking/rtmutex: Flip unlikely() branch to likely() in __rt_mutex_slowlock()
locking/rwsem: Reinit wake_q after use
locking/rwsem: Remove unnecessary atomic_long_t casts
jump_labels: Move header guard #endif down where it belongs
locking/atomic, kref: Implement kref_put_lock()
locking/ww_mutex: Turn off __must_check for now
locking/atomic, kref: Avoid more abuse
locking/atomic, kref: Use kref_get_unless_zero() more
locking/atomic, kref: Kill kref_sub()
locking/atomic, kref: Add kref_read()
locking/atomic, kref: Add KREF_INIT()
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this (fairly busy) cycle were:
- There was a class of scheduler bugs related to forgetting to update
the rq-clock timestamp which can cause weird and hard to debug
problems, so there's a new debug facility for this: which uncovered
a whole lot of bugs which convinced us that we want to keep the
debug facility.
(Peter Zijlstra, Matt Fleming)
- Various cputime related updates: eliminate cputime and use u64
nanoseconds directly, simplify and improve the arch interfaces,
implement delayed accounting more widely, etc. - (Frederic
Weisbecker)
- Move code around for better structure plus cleanups (Ingo Molnar)
- Move IO schedule accounting deeper into the scheduler plus related
changes to improve the situation (Tejun Heo)
- ... plus a round of sched/rt and sched/deadline fixes, plus other
fixes, updats and cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (85 commits)
sched/core: Remove unlikely() annotation from sched_move_task()
sched/autogroup: Rename auto_group.[ch] to autogroup.[ch]
sched/topology: Split out scheduler topology code from core.c into topology.c
sched/core: Remove unnecessary #include headers
sched/rq_clock: Consolidate the ordering of the rq_clock methods
delayacct: Include <uapi/linux/taskstats.h>
sched/core: Clean up comments
sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds
sched/clock: Add dummy clear_sched_clock_stable() stub function
sched/cputime: Remove generic asm headers
sched/cputime: Remove unused nsec_to_cputime()
s390, sched/cputime: Remove unused cputime definitions
powerpc, sched/cputime: Remove unused cputime definitions
s390, sched/cputime: Make arch_cpu_idle_time() to return nsecs
ia64, sched/cputime: Remove unused cputime definitions
ia64: Convert vtime to use nsec units directly
ia64, sched/cputime: Move the nsecs based cputime headers to the last arch using it
sched/cputime: Remove jiffies based cputime
sched/cputime, vtime: Return nsecs instead of cputime_t to account
sched/cputime: Complete nsec conversion of tick based accounting
...
It's very likely the file system independent ioctl name will be
FS_IOC_SHUTDOWN, so let's use the same name for the ext4 ioctl name.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull timer updates from Thomas Gleixner:
"Nothing exciting, just the usual pile of fixes, updates and cleanups:
- A bunch of clocksource driver updates
- Removal of CONFIG_TIMER_STATS and the related /proc file
- More posix timer slim down work
- A scalability enhancement in the tick broadcast code
- Math cleanups"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
hrtimer: Catch invalid clockids again
math64, tile: Fix build failure
clocksource/drivers/arm_arch_timer:: Mark cyclecounter __ro_after_init
timerfd: Protect the might cancel mechanism proper
timer_list: Remove useless cast when printing
time: Remove CONFIG_TIMER_STATS
clocksource/drivers/arm_arch_timer: Work around Hisilicon erratum 161010101
clocksource/drivers/arm_arch_timer: Introduce generic errata handling infrastructure
clocksource/drivers/arm_arch_timer: Remove fsl-a008585 parameter
clocksource/drivers/arm_arch_timer: Add dt binding for hisilicon-161010101 erratum
clocksource/drivers/ostm: Add renesas-ostm timer driver
clocksource/drivers/ostm: Document renesas-ostm timer DT bindings
clocksource/drivers/tcb_clksrc: Use 32 bit tcb as sched_clock
clocksource/drivers/gemini: Add driver for the Cortina Gemini
clocksource: add DT bindings for Cortina Gemini
clockevents: Add a clkevt-of mechanism like clksrc-of
tick/broadcast: Reduce lock cacheline contention
timers: Omit POSIX timer stuff from task_struct when disabled
x86/timer: Make delay() work during early bootup
delay: Add explanation of udelay() inaccuracy
...
There's no reason a request should ever be on a s_unsafe list but not
in the request tree.
Cc: stable@vger.kernel.org
Link: http://tracker.ceph.com/issues/18474
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In commit c3f4688a08 (ceph: don't set req->r_locked_dir in
ceph_d_revalidate), we changed the code to do a GETATTR instead of a
LOOKUP as the parent info isn't strictly necessary to revalidate the
dentry. What we missed there though is that in order to update the lease
on the dentry after revalidating it, we _do_ need parent info.
Change ceph_d_revalidate back to doing a LOOKUP instead of a GETATTR so
that we can get the parent info in order to update the lease from
ceph_fill_trace. Note that we set req->r_parent here, but we cannot set
the CEPH_MDS_R_PARENT_LOCKED flag as we can't guarantee that it is.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We don't really require that the parent be locked in order to update the
lease on a dentry. Lease info is protected by the d_lock. In the event
that the parent is not locked in ceph_fill_trace, and we have both
parent and target info, go ahead and update the dentry lease.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In a later patch, we're going to need to allow ceph_fill_trace to
update the dentry's lease when the parent is not locked. This is
potentially racy though -- by the time we get around to processing the
trace, the parent may have already changed.
Change update_dentry_lease to take a ceph_vino pointer and use that to
ensure that the dentry's parent still matches it before updating the
lease.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This if block updates the dentry lease even in the case where
the MDS didn't grant one.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
struct ceph_mds_request has an r_locked_dir pointer, which is set to
indicate the parent inode and that its i_rwsem is locked. In some
critical places, we need to be able to indicate the parent inode to the
request handling code, even when its i_rwsem may not be locked.
Most of the code that operates on r_locked_dir doesn't require that the
i_rwsem be locked. We only really need it to handle manipulation of the
dcache. The rest (filling of the inode, updating dentry leases, etc.)
already has its own locking.
Add a new r_req_flags bit that indicates whether the parent is locked
when doing the request, and rename the pointer to "r_parent". For now,
all the places that set r_parent also set this flag, but that will
change in a later patch.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently, we have a bunch of bool flags in struct ceph_mds_request. We
need more flags though, but each bool takes (at least) a byte. Those
add up over time.
Merge all of the existing bools in this struct into a single unsigned
long, and use the set/test/clear_bit macros to manipulate them. These
are atomic operations, but that is required here to prevent
load/modify/store races. The existing flags are protected by different
locks, so we can't rely on them for that purpose.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Just get it from r_session since that's what's always passed in.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Keeping around commented out code is just asking for it to bitrot and
makes viewing the code under cscope more confusing. If
we really need this, then we can revert this patch and put it under a
Kconfig option.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
__ceph_caps_mds_wanted() ignores caps from stale session. So the
return value of __ceph_caps_mds_wanted() can keep the same across
ceph_renew_caps(). This causes try_get_cap_refs() to keep calling
ceph_renew_caps(). The fix is ignore the session valid check for
the try_get_cap_refs() case. If session is stale, just let the
caps requester sleep.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
when flushing inode's auth cap changes, we need to move it into the
new auth cap session's cap_flushing list
Signed-off-by: Yan, Zheng <zyan@redhat.com>
add_to_page_cache_lru() can fails, so the actual pages to read
can be smaller than the initial size of osd request. We need to
update osd request size in that case.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
sparse says:
fs/ceph/ioctl.c💯28: warning: cast to restricted __le64
preferred_osd is a __s64 so we don't need to do any conversion. Also,
just remove the cast in ceph_ioctl_get_layout as it's not needed.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
user space may open/close single file frequently. It's not good
to send a clientcaps message to mds for each open/close syscall.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
This patch sets the io_pages bdi hint based on the rsize mount option.
Without this patch large buffered reads (request size > max readahead)
are processed sequentially in chunks of the readahead size (i.e. read
requests are sent out up to the readahead size, then the
do_generic_file_read() function waits until the first page is received).
With this patch read requests are sent out at once up to the size
specified in the rsize mount option (default: 64 MB).
Signed-off-by: Andreas Gerstmayr <andreas.gerstmayr@catalysts.cc>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
This removes the uses of ACCESS_ONCE in favor of READ_ONCE
Signed-off-by: Seraphime Kirkovski <kirkseraph@gmail.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
If we have a parent inode reference already, then we don't need to
go back up the directory tree to find one.
Link: http://tracker.ceph.com/issues/18148
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Accessing d_parent requires some sort of locking or it could vanish
out from under us. Since we take the d_lock anyway, use that to fetch
d_parent and take a reference to it, and then use that reference to
call ceph_encode_inode_release.
Link: http://tracker.ceph.com/issues/18148
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In the event that we have a parent inode reference in the request, we
can use that instead of mucking about in the dcache. Pass any parent
inode info we have down to build_dentry_path so it can make use of it.
Link: http://tracker.ceph.com/issues/18148
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
While we hold a reference to the dentry when build_dentry_path is
called, we could end up racing with a rename that changes d_parent.
Handle that situation correctly, by using the rcu_read_lock to
ensure that the parent dentry and inode stick around long enough
to safely check ceph_snap and ceph_ino.
Link: http://tracker.ceph.com/issues/18148
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
__choose_mds exists to pick an MDS to use when issuing a call. Doing
that typically involves picking an inode and using the authoritative
MDS for it. In most cases, that's pretty straightforward, as we are
using an inode to which we hold a reference (usually represented by
r_dentry or r_inode in the request).
In the case of a snapshotted directory however, we need to fetch
the non-snapped parent, which involves walking back up the parents
in the tree. The dentries in the snapshot dir are effectively frozen
but the overall parent is _not_, and could vanish if a concurrent
rename were to occur.
Clean this code up and take special care to ensure the validity of
the entries we're working with. First, try to use the inode in
r_locked_dir if one exists. If not and all we have is r_dentry,
then we have to walk back up the tree. Use the rcu_read_lock for
this so we can ensure that any d_parent we find won't go away, and
take extra care to deal with the possibility that the dentries could
go negative.
Change get_nonsnap_parent to return an inode, and take a reference to
that inode before returning (if any). Change all of the other places
where we set "inode" in __choose_mds to also take a reference, and then
call iput on that inode before exiting the function.
Link: http://tracker.ceph.com/issues/18148
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
I was looking through static analysis warnings and there is a bug here
that goes all the way back to the start of git. Basically we're copying
the pointer and nearby garbage instead of the data the fd.key pointer is
pointing to.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
XFS_ALLOCTYPE_ANY_AG was only used for the RT allocator and is unused
now, and XFS_ALLOCTYPE_START_AG has been unused for a while.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We can deduce the allocation type from the bno argument, and do the
return without prod much simpler internally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix the macro for the non-rt build]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
After tightening the OP_LOCKT reply size estimate, we can get warnings
like:
[11512.783519] RPC request reserved 124 but used 152
[11512.813624] RPC request reserved 108 but used 136
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSD usess PAGE_SIZE as the reply size estimate for RPCs which don't
support op_rsize_bop(), A PAGE_SIZE (4096) is larger than many real
response sizes, eg, access (op_encode_hdr_size + 2), seek
(op_encode_hdr_size + 3).
This patch just adds op_rsize_bop() for all RPCs getting response size.
An overestimate is generally safe but the tighter estimates are probably
better.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The callback tag is NULL, and hdr->nops is unused too right now, but.
But if we were to ever test with a nonzero callback tag, nops will get a
bad value.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The rpccred gotten from rpc_lookup_machine_cred() should be put when
state is shutdown.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Tigran Mkrtchyan's new pynfs testcases for zero length principals fail:
SATT16 st_setattr.testEmptyPrincipal : FAILURE
Setting empty owner should return NFS4ERR_INVAL,
instead got NFS4ERR_BADOWNER
SATT17 st_setattr.testEmptyGroupPrincipal : FAILURE
Setting empty owner_group should return NFS4ERR_INVAL,
instead got NFS4ERR_BADOWNER
This patch checks the principal and returns nfserr_inval directly. It
could check after decoding in nfs4xdr.c, but it's simpler to do it in
nfsd_map_xxxx.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The function glock_hash_walk walks the rhashtable by hand. This
is broken because if it catches the hash table in the middle of
a rehash, then it will miss entries.
This patch replaces the manual walk by using the rhashtable walk
interface.
Fixes: 88ffbf3e03 ("GFS2: Use resizable hash table for glocks")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit e5d6b12fe1 (Btrfs: don't WARN() in btrfs_transaction_abort() for
IO errors) added a pr_debug call to be printed when a transaction is
aborted with -EIO instead of WARN. btrfs_debug prints which file system
the message is associated with so let's use that instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_truncate_free_space_cache always allocates a btrfs_path structure
but only uses it when the caller passes a block group. Let's move the
allocation and free into the conditional.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The free space cache APIs accept a root but always use the tree root.
Also, btrfs_truncate_free_space_cache accepts a root AND an inode but
the inode always points to the root anyway, so let's just pass the inode.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_inc_block_group_ro is either passed the extent root or the dev
root, but it doesn't do anything with the dev tree. Let's convert
to passing an fs_info and using the extent root.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to pass a root to flush_space since it always uses
the fs_root.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Outside of interactions with qgroups, the roots passed in extent-tree.c
are usually passed to ensure that we don't do refcounts on log trees or
to get the allocation profile for an allocation request. Otherwise, it
operates on the extent root. This patch converts some more routines in
extent-tree.c that are always called with the extent root to accept
an fs_info instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just as Filipe pointed out, the most time consuming parts of qgroup are
btrfs_qgroup_account_extents() and
btrfs_qgroup_prepare_account_extents().
Which both call btrfs_find_all_roots() to get old_roots and new_roots
ulist.
What makes things worse is, we're calling that expensive
btrfs_find_all_roots() at transaction committing time with
TRANS_STATE_COMMIT_DOING, which will blocks all incoming transaction.
Such behavior is necessary for @new_roots search as current
btrfs_find_all_roots() can't do it correctly so we do call it just
before switch commit roots.
However for @old_roots search, it's not necessary as such search is
based on commit_root, so it will always be correct and we can move it
out of transaction committing.
This patch moves the @old_roots search part out of
commit_transaction(), so in theory we can half the time qgroup time
consumption at commit_transaction().
But please note that, this won't speedup qgroup overall, the total time
consumption is still the same, just reduce the performance stall.
Cc: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Both unused after the call to update_cache_item has been moved to
__btrfs_wait_cache_io.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unused since the helper has been split, eb used in the caller.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After the page locking has been reworked, we get all pages prepared via
cmp_pages.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The name parameters have never been used, as the name is passed via the
dentry.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The 'device' used to be added in that function, but now it's done by the
caller.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Never used for anything meaningful since we have our own superblock
filler.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The 'tree' was used to call locking hook that does not exist anymore.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The logic has been updated in "Btrfs: make mapping->writeback_index
point to the last written page" (a91326679f) and page is not
needed anymore.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This used to hold number of maximum pages to allocate, but this is now
limited by BIO_MAX_PAGES. The local are now unused and removed as well.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
None of the checks need to know the ro/rw status as they're all not
changing the superblock. Moreover, we can access the sb flags directly
if we'd need to decide by the ro/rw status.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unused since qgroup refactoring that split data and metadata accounting,
the btrfs_qgroup_free helper.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
write_all_supers and write_ctree_super are almost equal, the parameter
'trans' is unused so we can drop it and have just one helper.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
