Commit Graph

4515 Commits

Author SHA1 Message Date
Johannes Berg
4a733ef1be mac80211: remove PM-QoS listener
As this API has never really seen any use and most drivers don't
ever use the value derived from it, remove it.

Change the only driver using it (rt2x00) to simply use the DTIM
period instead of the "max sleep" time.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-14 18:04:08 +02:00
Johannes Berg
61f6bba006 mac80211: use new cfg80211_inform_bss_frame_data() API
The new API is more easily extensible with a metadata struct
passed to it, use it in mac80211.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13 11:36:21 +02:00
Avraham Stern
e2845c458e mac80211: Do not restart scheduled scan if multiple scan plans are set
If multiple scan plans were set for scheduled scan, do not restart
scheduled scan on reconfig because it is possible that some scan
plans were already completed and there is no need to run them all
over again. Instead, notify userspace that scheduled scan stopped
so it can configure new scan plans for scheduled scan.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13 10:35:51 +02:00
Mohammed Shafi Shajakhan
4633dfc32c mac80211: Fix hwflags debugfs file format
Commit 30686bf7f5 ("mac80211: convert HW flags to unsigned long
bitmap") accidentally removed the newline delimiter from the hwflags
debugfs file. Fix this by adding back the newline between the HW flags.

Cc: stable@vger.kernel.org [4.2]
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
[fix commit log]
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13 10:30:56 +02:00
Tamizh chelvam
93f0490e5d Revert "mac80211: remove exposing 'mfp' to drivers"
This reverts commit 5c48f12017.

Some device drivers (ath10k) offload part of aggregation including AddBA/DelBA
negotiations to firmware. In such scenario, the PMF configuration of
the station needs to be provided to driver to enable encryption of
AddBA/DelBA action frames.

Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13 10:29:11 +02:00
Johannes Berg
985f2c87a7 Merge remote-tracking branch 'net-next/master' into mac80211-next
Merge net-next to get some driver changes that patches depend
on (in order to avoid conflicts).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13 10:28:43 +02:00
Felix Fietkau
4d57c67827 mac80211: add missing struct ieee80211_txq tid field initialization
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-08 11:10:50 +02:00
David S. Miller
2579c98f0d For the current cycle, we have the following right now:
* many internal fixes, API improvements, cleanups, etc.
  * full AP client state tracking in cfg80211/mac80211 from Ayala
  * VHT support (in mac80211) for mesh
  * some A-MSDU in A-MPDU support from Emmanuel
  * show current TX power to userspace (from Rafał)
  * support for netlink dump in vendor commands (myself)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJWEp5XAAoJEDBSmw7B7bqr8DsQAICgQL7gSkHUlc6rbMJ9MzX+
 9W0SNpZHSmfE0ZsL3cCoeHbk5dGhX82GumIz4GeqtvIKUNHkC8qlnXJIKTEva+sp
 PjcF1wS0qQFdt6sg/Zxq+4Q8lZrZf1xP9W0x0ORYi9d9qej07JAZku8zYt4agpNV
 R4nCl/gKVF375aV8y+qi+WSZXx4j80dJkokoVk4hzotWjd0bGVL1T9YwDRzxg4FI
 S0DnkxlsD3MRHJXq+9+DbF5cuTjCG2LZNcDIBy455eWN27j9CWgEPVXoySQjDgQc
 ayf2siw7BccqnV84et0vi+0WYXdZCHm3zCen44s4vaCflhdGxdx48V+Lib6mluR3
 OEM1V1l9uV97UyORPljRKvDURq2IUdLQw00of26CTX8qEnmQIfxC7qaRg0rYEiGW
 SbTClbEiEkBLV+sCStnkv8GJHNpvtI/2VQXH1ydrHsrWC3Sl9bpPOWYlNBPwdzM9
 U4zgpxf6gLqlsukQKmMDmoKW7T04Fs0qgE99ThU2x6uTGsux8bfbxgzPCfUdeY8M
 HmCB5oBCZKJ5pzv6z6lUGc0cO42IL50aBrrlatrEekjevUXW3MMOZCwGrUXxpMw1
 gd+2PnLCCUeDyKNvkpXEgr4uS9Egc0sWH1RlpDPaAA5gRdRHiDn7MK7Z+s5OpNIC
 wnFCQKB+KrNNrQFuXz9k
 =BF9F
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2015-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
For the current cycle, we have the following right now:
 * many internal fixes, API improvements, cleanups, etc.
 * full AP client state tracking in cfg80211/mac80211 from Ayala
 * VHT support (in mac80211) for mesh
 * some A-MSDU in A-MPDU support from Emmanuel
 * show current TX power to userspace (from Rafał)
 * support for netlink dump in vendor commands (myself)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07 04:29:18 -07:00
Andrzej Hajda
5edfcee5ed mac80211: make ieee80211_new_mesh_header return unsigned
The function returns always non-negative values.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-05 17:54:16 +02:00
Arnd Bergmann
84b00607ae mac80211: use ktime_get_seconds
The mac80211 code uses ktime_get_ts to measure the connected time.
As this uses monotonic time, it is y2038 safe on 32-bit systems,
but we still want to deprecate the use of 'timespec' because most
other users are broken.

This changes the code to use ktime_get_seconds() instead, which
avoids the timespec structure and is slightly more efficient.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05 03:16:45 -07:00
Johannes Berg
076cdcb12f mac80211: use bool argument to ieee80211_send_nullfunc
Instead of int with 0/1, use bool with false/true for the
powersave argument to ieee80211_send_nullfunc().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:52 +02:00
Johannes Berg
90d13e8f5b mac80211: reduce indentation by inlining a check
Instead of nesting two if statements, inline the second
check into the first if statement and to indentation.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:52 +02:00
Felix Fietkau
50f36ae61a mac80211: fix tx sequence number assignment with software queue + fast-xmit
When using software queueing, tx sequence number assignment happens at
ieee80211_tx_dequeue time, so the fast-xmit codepath must not do that.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:51 +02:00
Ayala Beker
44674d9c22 mac80211: advertise support for full station state in AP mode
This enables adding stations in unauthenticated mode, just after
receiving the first authentication frame; which in turn allows
sending a negative authentication reply if the station cannot be
added.

In addition init rate control for unassociated station only when
it becomes associated, prior to that low rates will be used.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:51 +02:00
Johannes Berg
d0a77c6569 mac80211: allow writing TX PN in debugfs
For certain tests, for example replay detection, it can be useful
to be able to influence/set the PN used in outgoing packets. Make
it possible to change the TX PN in debugfs.

For now, this doesn't support TKIP since I haven't needed it, but
there's no reason it couldn't be added if necessary.

Note that this must be used very carefully: it could, for example,
be used to make "valid replays" where the PN reuse happens on a
different TID. This couldn't be done by an attacker since the TID
is protected as part of the AAD.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:50 +02:00
Denys Vlasenko
416eb9fc29 mac80211: Deinline drv_get/set/reset_tsf()
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os,
after deinlining these functions have sizes and callsite counts
as follows:

drv_get_tsf: 634 bytes, 6 calls
drv_set_tsf: 626 bytes, 2 calls
drv_reset_tsf: 617 bytes, 2 calls

Total size reduction is about 4.2 kbytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Johannes Berg <johannes.berg@intel.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
CC: linux-wireless@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:49 +02:00
Denys Vlasenko
6db9683897 mac80211: Deinline drv_ampdu_action()
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os,
after deinlining the function size is 755 bytes and there are
6 callsites.

Total size reduction is about 3.3 kbytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Johannes Berg <johannes.berg@intel.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
CC: linux-wireless@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:49 +02:00
Denys Vlasenko
42677ed33a mac80211: Deinline drv_switch_vif_chanctx()
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os,
after deinlining the function size is 821 bytes and there are
2 callsites, reducing code size by about 800 bytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Johannes Berg <johannes.berg@intel.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
CC: linux-wireless@vger.kernel.org
CC: linux-kernel@vger.kernel.org
[adjust code-style a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:48 +02:00
Johannes Berg
0e5c371aa0 mac80211: improve __rate_control_send_low warning
If there are no supported rates in the rate mask with the required
flags, we warn, but it's not clear which part causes the warning.

Add the relevant data to the warning to understand why it happens.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:48 +02:00
Johannes Berg
a0c391b134 mac80211: minstrel[_ht]: remove non-ascii debugfs characters
Replace the average symbol by "avg" to avoid being warned about the
non-ASCII symbol all the time, line up the columns properly.

(I changed my mind - the warnings are getting annoying)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:47 +02:00
Eliad Peller
2739271954 mac80211: don't tear down aggregation on suspend in case of wowlan->any
In case of "any" wowlan trigger, there is no reason to tear down
aggregations, as we want the device to continue working normally.

Similarly, there's no reason to tear down aggregations on resume,
as they should have been torn down on suspend if needed.
However, since the reconfiguration flow is shared with HW restart,
tear down aggregations on reconfiguration when we are not resuming.

To keep things working after non-wowlan suspend, keep clearing the
WLAN_STA_BLOCK_BA flag.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:47 +02:00
Denys Vlasenko
9aae296a62 mac80211: Deinline drv_add/remove/change_interface()
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os,
after deinlining these functions have sizes and callsite counts
as follows:

drv_add_interface: 638 bytes, 5 calls
drv_remove_interface: 611 bytes, 6 calls
drv_change_interface: 658 bytes, 1 call

Total size reduction is about 9 kbytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
CC: Johannes Berg <johannes.berg@intel.com>
CC: linux-wireless@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:46 +02:00
Denys Vlasenko
4fbd572c29 mac80211: Deinline drv_sta_rc_update()
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os,
after deinlining the function size is 706 bytes and there are
2 callsites, reducing code size by about 700 bytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
CC: Johannes Berg <johannes.berg@intel.com>
CC: linux-wireless@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:45 +02:00
Denys Vlasenko
b23dcd4aca mac80211: Deinline drv_conf_tx()
With this .config: http://busybox.net/~vda/kernel_config_ALLYES_Os,
after deinlining the function size is 785 bytes and there are
7 callsites.

Total size reduction is about 3.5 kbytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
CC: Johannes Berg <johannes.berg@intel.com>
CC: linux-wireless@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:45 +02:00
Helmut Schaa
35afa58862 mac80211: Copy tx'ed beacons to monitor mode
When debugging wireless powersave issues on the AP side it's quite helpful
to see our own beacons that are transmitted by the hardware/driver. However,
this is not that easy since beacons don't pass through the regular TX queues.

Preferably drivers would call ieee80211_tx_status also for tx'ed beacons
but that's not always possible. Hence, just send a copy of each beacon
generated by ieee80211_beacon_get_tim to monitor devices when they are
getting fetched by the driver.

Also add a HW flag IEEE80211_HW_BEACON_TX_STATUS that can be used by
drivers to indicate that they report TX status for beacons.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
(with a fix from Christian Lamparted rolled in)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:33 +02:00
Felix Fietkau
f7418bc10d mac80211: fix handling of PS filtering with fast-xmit
Fixes dropped packets in the tx path in case a non-PS station triggers
the tx filter.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-24 16:28:01 +02:00
Sara Sharon
babc305e21 mac80211: reset CQM history upon reconfiguration
The current behavior of notifying CQM events is inconsistent:
Upon first configuration there is a cqm event with the current
status according to threshold configured, regardless of signal
stability.
When there is reconfiguration no event is sent unless there is
a significant change to the signal level according to the new
configuration.

Since the current reconfiguration behavior might cause missing
CQM events in case the current signal did not change but is on
the other side of the new threshold, fix that by resetting the
stored signal level upon reconfiguration.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:22:50 +02:00
Helmut Schaa
4dc792b8f0 mac80211: Split sending tx'ed frames to monitor interfaces into its own function
This allows ieee80211_tx_monitor to be used directly for sending 802.11 frames
to all monitor interfaces.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:28 +02:00
Johannes Berg
338c17ae31 mac80211: use DECLARE_EWMA for ave_beacon_signal
It doesn't seem problematic to change the weight for the average
beacon signal from 3 to 4, so use DECLARE_EWMA. This also makes
the code easier to maintain since bugs like the one fixed in the
previous patch can't happen as easily.

With a fix from Avraham Stern to invert the sign since EMWA uses
unsigned values only.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:26 +02:00
Johannes Berg
8ec6d97871 mac80211: fix driver RSSI event calculations
The ifmgd->ave_beacon_signal value cannot be taken as is for
comparisons, it must be divided by since it's represented
like that for better accuracy of the EWMA calculations. This
would lead to invalid driver RSSI events. Fix the used value.

Fixes: 615f7b9bb1 ("mac80211: add driver RSSI threshold events")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:26 +02:00
Johannes Berg
8e0d7fe07c mac80211: remove last_beacon/ave_beacon debugfs files
These file aren't really useful:
 - if per beacon data is required then you need to use
   radiotap or similar anyway, debugfs won't help much
 - average beacon signal is reported in station info in
   nl80211 and can be looked up with iw

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:25 +02:00
Bob Copeland
c85fb53c4f mac80211: implement VHT support for mesh
Implement the basics required for supporting very high throughput
with mesh: include VHT information elements in beacons, probe
responses, and peering action frames, and check for compatible VHT
configurations when peering.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:25 +02:00
Chun-Yeow Yeoh
f020ae40b0 mac80211: zero center freq segment 2 in VHT oper IE
Clear the Channel Center Frequency Segment 2 in VHT operation
IEs to avoid sending non-zero values if the SKB wasn't zeroed
before adding the VHT operation IE.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
[change commit message a bit - not necessarily just mesh related]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:24 +02:00
Emmanuel Grumbach
99e7ca44bb mac80211: allow the driver to advertise A-MSDU within A-MPDU Rx support
Drivers may be interested in receiving A-MSDU within A-MDPU.
Not all the devices may be able to do so, make it configurable.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:24 +02:00
Johannes Berg
46cad4b7a1 mac80211: remove direct probe step before authentication
The direct probe step before authentication was done mostly for
two reasons:
 1) the BSS data could be stale
 2) the beacon might not have included all IEs

The concern (1) doesn't really seem to be relevant any more as
we time out BSS information after about 30 seconds, and in fact
the original patch only did the direct probe if the data was
older than the BSS timeout to begin with. This condition got
(likely inadvertedly) removed later though.

Analysing this in more detail shows that since we mostly use
data from the association response, the only real reason for
needing the probe response was that the code validates the WMM
parameters, and those are optional in beacons. As the previous
patches removed that behaviour, we can now remove the direct
probe step entirely.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:23 +02:00
Emmanuel Grumbach
e3abc8ff0f mac80211: allow to transmit A-MSDU within A-MPDU
Advertise the capability to send A-MSDU within A-MPDU
in the AddBA request sent by mac80211. Let the driver
know about the peer's capabilities.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:23 +02:00
Andrei Otcheretianski
1b09b5568e mac80211: introduce per vif frame registration API
Currently the cfg80211's frame registration api receives wdev, however
mac80211 assumes per device filter configuration and ignores wdev.
Per device filtering is too wasteful, especially for multi-channel
devices.
Introduce new per vif frame registration API and use it for probe
request registrations in ieee80211_mgmt_frame_register()
Also call directly to ieee80211_configure_filter instead of using a work
since it is now allowed to sleep in ieee80211_mgmt_frame_register.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:22 +02:00
Arik Nemtsov
dd55ab59b6 mac80211: TDLS: check reg with IR-relax on chandef upgrade
When checking if a TDLS chandef can be upgraded, IR-relaxation can be
taken into account to allow more channels.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:21 +02:00
Arik Nemtsov
82c0cc90d6 mac80211: debugfs: add file to disallow TDLS wider-bw
Sometimes we are interested in testing TDLS performance in a specific
width setting. Add the ability to disable the wider-band feature, thereby
allowing the TDLS channel width to be controlled by the BSS width.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:21 +02:00
Andrei Otcheretianski
fc58c47ef1 mac80211: process skb_queue while scanning in HW
Queued frames aren't processed during scan, which results in an inability
to complete the BA session establishment until the scan ends. Since we
can't tx frames until the BA agreement setup is complete, it might result
in a very large latency during scan.
Fix this by allowing to process queued skbs while scanning in HW. This
should be ok since the devices which support hw scan should be able
to handle tx/rx while scanning.
During SW scan, mac80211 drops any txed frames besides probes and NDPs,
so it is still needed to delay processing of the queued frames till the
SW scan is done.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:21:20 +02:00
Johannes Berg
2df1b131b5 mac80211: fix VHT MCS mask array overrun
The HT MCS mask has 9 bytes, the VHT one only has 8 streams.
Split the loops to handle this correctly.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22 15:19:48 +02:00
Johannes Berg
ef9be10c8c mac80211: reject software RSSI CQM with beacon filtering
When beacon filtering is enabled the mac80211 software implementation
for RSSI CQM cannot work as beacons will not be available. Rather than
accepting such a configuration without proper effect, reject it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-04 15:23:22 +02:00
Arik Nemtsov
52a45f38ca mac80211: avoid VHT usage with no 80MHz chans allowed
Currently if 80MHz channels are not allowed for use, the VHT IE is not
included in the probe request for an AP. This is not good enough if the
AP is configured with the wrong regulatory and supports VHT even where
prohibited or in TDLS scenarios.
Mark the ifmgd with the DISABLE_VHT flag for the misbehaving-AP case, and
unset VHT support from the peer-station entry for the TDLS case.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-04 14:31:41 +02:00
Avri Altman
22f66895e6 mac80211: protect non-HT BSS when HT TDLS traffic exists
HT TDLS traffic should be protected in a non-HT BSS to avoid
collisions. Therefore, when TDLS peers join/leave, check if
protection is (now) needed and set the ht_operation_mode of
the virtual interface according to the HT capabilities of the
TDLS peer(s).

This works because a non-HT BSS connection never sets (or
otherwise uses) the ht_operation_mode; it just means that
drivers must be aware that this field applies to all HT
traffic for this virtual interface, not just the traffic
within the BSS. Document that.

Signed-off-by: Avri Altman <avri.altman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-04 14:25:46 +02:00
Thierry Reding
98a1f8282b mac80211: Do not use sizeof() on pointer type
The rate_control_cap_mask() function takes a parameter mcs_mask, which
GCC will take to be u8 * even though it was declared with a fixed size.
This causes the following warning:

	net/mac80211/rate.c: In function 'rate_control_cap_mask':
	net/mac80211/rate.c:719:25: warning: 'sizeof' on array function parameter 'mcs_mask' will return size of 'u8 * {aka unsigned char *}' [-Wsizeof-array-argument]
	   for (i = 0; i < sizeof(mcs_mask); i++)
	                         ^
	net/mac80211/rate.c:684:10: note: declared here
	       u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN],
	          ^

This can be easily fixed by using the IEEE80211_HT_MCS_MASK_LEN directly
within the loop condition.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-04 14:23:08 +02:00
David S. Miller
dc25b25897 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/usb/qmi_wwan.c

Overlapping additions of new device IDs to qmi_wwan.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21 11:44:04 -07:00
Johannes Berg
40d9a38ad3 mac80211: use DECLARE_EWMA
Instead of using the out-of-line average calculation, use the new
DECLARE_EWMA() macro to declare a signal EWMA, and use that.

This actually *reduces* the code size slightly (on x86-64) while
also reducing the station info size by 80 bytes.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14 17:49:53 +02:00
Lorenzo Bianconi
b119ad6e72 mac80211: add rate mask logic for vht rates
Define rc_rateidx_vht_mcs_mask array and rate_idx_match_vht_mcs_mask()
method in order to apply mcs mask for vht rates

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14 17:49:51 +02:00
Lorenzo Bianconi
e910867bd2 mac80211: define rate_control_apply_mask_ratetbl()
Define rate_control_apply_mask_ratetbl() in order to apply ratemask in
rate_control_set_rates() for station rate table

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14 17:49:51 +02:00
Lorenzo Bianconi
90c66bd223 mac80211: remove ieee80211_tx_rate dependency in rate mask code
Remove ieee80211_tx_rate dependency in rate_idx_match_legacy_mask(),
rate_idx_match_mcs_mask() and rate_idx_match_mask() in order to use the
previous logic to define a ratemask in rate_control_set_rates() for
station rate table. Moreover move rate mask definition logic in
rate_control_cap_mask()

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14 17:49:50 +02:00
Lorenzo Bianconi
35225eb7a5 mac80211: remove ieee80211_tx_info from rate_control_apply_mask signature
Remove unnecessary ieee80211_tx_info pointer from rate_control_apply_mask
signature. rate_control_apply_mask() will be used to define a ratemask in
rate_control_set_rates() for station rate table

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14 17:49:50 +02:00
Bertold Van den Bergh
4b819f6cc4 mac80211: Make OCB mode set BSSID
Perform the BSS_CHANGED_BSSID action when joining an OCB network.
This is required to set the broadcast BSSID in some network drivers.

Signed-off-by: Bertold Van den Bergh <bertold.vandenbergh@esat.kuleuven.be>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14 17:49:49 +02:00
Bertold Van den Bergh
cc11729893 mac80211: Only accept data frames in OCB mode
Currently OCB mode accepts frames with bssid==broadcast and type!=beacon.
Some non-data frames are sent matching this, for example probe responses.
This results in unnecessary creation of STA entries.

Signed-off-by: Bertold Van den Bergh <bertold.vandenbergh@esat.kuleuven.be>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14 17:49:49 +02:00
Bertold Van den Bergh
5765f9f66e mac80211: Set txrc.bss to true for OCB interfaces
To make mac80211 accept the multicast rate requested by the user the
rate control should be told that it is operating in BSS mode.
Without this, the default rate is selected in rate_control_send_low
(!pubsta and !txrc->bss)

Signed-off-by: Bertold Van den Bergh <bertold.vandenbergh@esat.kuleuven.be>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14 17:49:48 +02:00
Adrien Schildknecht
f5eeb5fa19 mac80211: fix invalid read in minstrel_sort_best_tp_rates()
At the last iteration of the loop, j may equal zero and thus
tp_list[j - 1] causes an invalid read.
Change the logic of the loop so that j - 1 is always >= 0.

Cc: stable@vger.kernel.org
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-13 13:52:34 +02:00
Dan Carpenter
75dbf00b44 mac80211: remove always true condition
The outside if statement checks that IEEE80211_TX_INTFL_MLME_CONN_TX is
set so this condition is always true.  Checking twice upsets the static
checkers.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-13 11:36:01 +02:00
Johannes Berg
4b58c37bb9 mac80211: remove ieee80211_aes_cmac_calculate_k1_k2()
The iwlwifi driver was the only driver that used this, but as
it turns out it never needed it, so we can remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-13 11:31:45 +02:00
Denys Vlasenko
eb6d9293df mac80211: deinline rate_control_rate_init, rate_control_rate_update
With this .config: http://busybox.net/~vda/kernel_config,
after deinlining these functions have sizes and callsite counts
as follows:

rate_control_rate_init: 554 bytes, 8 calls
rate_control_rate_update: 1596 bytes, 5 calls

Total size reduction: about 11 kbytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
CC: Johannes Berg <johannes.berg@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:50:02 +02:00
Denys Vlasenko
727da60be9 mac80211: deinline drv_sta_state
With this .config: http://busybox.net/~vda/kernel_config,
after deinlining the function size is 3132 bytes and there are
7 callsites.

Total size reduction: about 20 kbytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:48:50 +02:00
Bob Copeland
0e0060fcfb mac80211: select an AID when creating new mesh STAs
Instead of using peer link id for AID, generate a new
AID when creating mesh STAs in the kernel peering manager.
This enables smaller TIM elements and more closely follows
the standard, and it also enables mesh to work on drivers
that require a valid AID when the STA is inserted (ath10k
firmware has this requirement, for example).

In the case of userspace-managed stations, we use the AID
from NL80211_CMD_NEW_STATION.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:47:58 +02:00
Bob Copeland
a69bd8e60b mac80211: mesh: separate plid and aid concepts
According to 802.11-2012 13.3.1, a mesh STA should assign an AID
upon receipt of a mesh peering open frame rather than using the link
id of the peer.  Using the peer link id has two potential issues:
it may not be unique among the peers, and by its nature it is random,
so the TIM may not compress well.

In preparation for allocating it properly, use sta->sta.aid, but keep
the existing behavior of using the plid in the aid we send.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:47:11 +02:00
Bob Copeland
fa87a6566c mac80211: reorder mesh_plink to remove forward decl
Move mesh_plink_frame_tx() above the first caller to remove
the forward declaration.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:47:02 +02:00
Eliad Peller
b0485e9f3d mac80211: clear local->suspended before calling drv_resume()
Currently, mac80211 calls drv_resume() on wowlan resume,
but drops any incoming frame until local->suspended is
cleared later on.

This requires the low-level driver to support a new state,
in which it is expected to fully work (as it was resumed)
but not passing rx frames yet (as they will be dropped).

iwlwifi (and probably other drivers as well) has issues
supporting such mode.

Since in the wowlan case we already short-circuit
ieee80211_reconfig, there's nothing that prevents us from
clearing local->suspend before calling drv_resume(),
and letting the low-level driver work normally.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:40:46 +02:00
Arik Nemtsov
42d8d78961 mac80211: TDLS: deny ch-switch req on disallowed channels
If a TDLS station is not allowed to beacon on a channel, don't accept
a channel switch request to this channel.
Move channel building code up to avoid lockdep violations - reg_can_beacon
needs to take the wdev lock.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:40:35 +02:00
Arik Nemtsov
c8ff71e667 mac80211: TDLS: handle chan-switch in RTNL locked work
Move TDLS channel-switch Rx handling into an RTNL locked work. This is
required to add proper regulatory checking to incoming channel-switch
requests.
Queue incoming requests in a dedicated skb queue and handle the request
in a device-specific work to avoid deadlocking on interface removal.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:40:15 +02:00
Johannes Berg
72bbe3d1c2 Merge branch 'mac80211' into mac80211-next
This is necessary to merge the new TDLS and mesh patches,
as they depend on some fixes.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:39:41 +02:00
Sara Sharon
322cd406da mac80211: Add support for declaring MU-MIMO capability
Add support for declaring MU-MIMO beamformee capability for
relevant hardware.
When sending association request, the capability is included if both
hardware and the AP support it, and no other virtual interface
is using it.
This is in order to avoid multiple interfaces using MU-MIMO in parallel
which might lead to contradictions in the group-id mechanism.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:29 +02:00
Johannes Berg
ccc6bb96ff mac80211: account TX MSDUs properly with segmentation offload
If an SKB will be segmented by the driver, count it for multiple
MSDUs that are being transmitted rather than just a single.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:28 +02:00
Johannes Berg
69f1322368 mac80211: shrink struct ieee80211_fragment_entry
Most of the fields in this struct use too wide types, change
that to shrink the struct from 64 to 48 bytes (on 64-bit.)

This results in a total saving of 64 bytes for each interface.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:25 +02:00
Johannes Berg
a76d5e0a23 mac80211: mesh: move fail_avg into mesh struct
This value is only used in mesh, so move it into the new mesh
sub-struct of the station info.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:24 +02:00
Krishna Chaitanya
a3ebb4e1b7 mac80211: minstrel_ht: handle peers in dynamic SMPS
In case of Dynamic SMPS enable RTS/CTS for all rates.

Signed-off-by: Chaitanya T K <chaitanya.mgit@gmail.com>
[change comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:20 +02:00
Chun-Yeow Yeoh
932e628da2 mac80211: mesh process the target only subfield for mesh hwmp
This patch does the following:
- Remove unnecessary flags field used by PERR element
- Use the per target flags defined in <linux/ieee80211.h>
- Process the target only subfield based on case E2 of
  IEEE802.11-2012 13.10.9.3

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:19 +02:00
Arik Nemtsov
d51c2ea370 mac80211: TDLS: correctly configure SMPS state
The IEEE802.11-2012 specification is vague regarding SMPS operation during
TDLS. It does not define a clear way to transition between SMPS states.

To avoid interop issues, set SMPS to off when TDLS peers are connected.
Accomplish this by extending the definition of the AUTOMATIC state. If the
driver forces a state other than OFF, disconnect all TDLS peers.

While at it, avoid changing the SMPS state of the peer STA. We have no
way to control it, so try and behave correctly towards it.

Move the TDLS peer-teardown function to where the rest of the TDLS code
resides.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:18 +02:00
Bob Copeland
3633ebebab mac80211: enable assoc check for mesh interfaces
We already set a station to be associated when peering completes, both
in user space and in the kernel.  Thus we should always have an
associated sta before sending data frames to that station.

Failure to check assoc state can cause crashes in the lower-level driver
due to transmitting unicast data frames before driver sta structures
(e.g. ampdu state in ath9k) are initialized.  This occurred when
forwarding in the presence of fixed mesh paths: frames were transmitted
to stations with whom we hadn't yet completed peering.

Cc: stable@vger.kernel.org
Reported-by: Alexis Green <agreen@cococorp.com>
Tested-by: Jesse Jones <jjones@cococorp.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:17 +02:00
Jesse Jones
d8f0300a7a mac80211: mac80211: Check SN for deactivated mpaths
When processing a PREQ or PREP it's critical to use the incoming SN. If
that is improperly done routing loops and other types of badness can
happen. But the code was always processing path messages for deactivated
paths. This path fixes that so that if we have a valid SN then we use it
to verify that it is a message we can accept. For reference the relevant
section of the standard is 13.10.8.4 which doesn't address the deactivated
path case at all.

I also included a special case for when our peer reboots or restarts
networking. This is an important case because without it there can be a
very long delay before we accept path messages from that peer. It's also a
simple case and intimately associated with processing messages for
deactivated paths so I used one patch instead of two.

Signed-off-by: Alexis Green <agreen@cococorp.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:16 +02:00
Jesse Jones
d82547106f mac80211: mesh: don't invalidate SN on discovery failure
The 2012 spec mentions that path SNs can be invalid when created (see
section 13.10.8.4 table 13-9) but AFAICT never talks about invalidating
SNs. Which makes sense: if we have figured out the path to a target at a
certain SN then we want to remember that fact. Failing to do so can lead
to routing loops because if we don't have a valid SN then we have no way
of knowing whether an incoming path message leads to or away from the
target.

However currently when discovery fails we zero out mpath->flags which
clears MESH_PATH_SN_VALID. This patch fixes that so that only the
discovery relevant flags are cleared.

Signed-off-by: Alexis Green <agreen@cococorp.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:14 +02:00
Alexis Green
703ee73a41 mac80211: mesh: add missing case to PERR processing
When the nexthop is unable to resolve its own nexthop it will send back a
PERR with a zero target_sn. According to section 13.10.11.4.3 step b in the
2012 standard that perr should be forwarded and the associated mpath->sn
should be incremented. Neither one of those was happening which is rather
bad because the originator was not told that packets are black holing.

Signed-off-by: Alexis Green <agreen@cococorp.com>
CC: Jesse Jones <jjones@cococorp.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:13 +02:00
Arik Nemtsov
0fabfaafec mac80211: upgrade BW of TDLS peers when possible
Define a station chandef, to be used for wider-bw TDLS peers. When both
peers support the feature, upgrade the channel bandwidth to the maximum
allowed by both peers and regulatory. Currently widths up to 80MHz are
supported in the 5GHz band.

When a TDLS peer connects/disconnects recalculate the channel type of the
current chanctx.
Make the chanctx width calculation consider wider-bw TDLS peers and
similarly fix the max_required_bw calculation for the chanctx min_def.
Since the sta->bandwidth is calculated only later on, take
bss_conf.chandef.width as the minimal width for station interface.

Set the upgraded channel width in the VHT-operation set during TDLS setup.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:12 +02:00
Arik Nemtsov
b98fb44ffc mac80211: define TDLS wider BW support bits
Allow a device to specify support for the TDLS wider-bandwidth feature.
Indicate this support during TDLS setup in the ext-capab IE and set an
appropriate station flag when our TDLS peer supports it.
This feature gives TDLS peers the ability to use a wider channel than
the base width of the BSS. For instance VHT capable TDLS peers connected
on a 20MHz channel can extend the channel to 80MHz, if regulatory
considerations allow it.

Do not cap the bandwidth of such stations by the current BSS channel width
in mac80211.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:11 +02:00
Eliad Peller
7584f88f9e mac80211: clear local->in_reconfig on reconfig error
If reconfiguration fails, local->in_reconfig is never
cleaned, resulting in rx frames being dropped next
time the device is started.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:10 +02:00
Johannes Berg
6513e98e05 mac80211: allow passing NULL to ieee80211_vif_to_wdev()
Simply return NULL in this case, instead of crashing. This can
simplify callers that would otherwise have to check for this
explicitly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:09 +02:00
Wojciech Dubowik
e996ec2a4d mac80211: avoid unnecessary beacon deref on CSA counter update
The beacon struct is already available in many contexts that
are also already in an RCU read-locked section. Avoid that by
using the existing beacon struct pointer directly.

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
[rewrite subject/add commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:08 +02:00
Johannes Berg
1365770248 mac80211: move mesh STA parameters code to own function
The code was always a bit awkward due to the 80-col restriction
and got worse in the previous patch. Refactor it a bit into its
own function to make it read nicer.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:07 +02:00
Johannes Berg
433f5bc1c0 mac80211: move mesh related station fields to own struct
There are now a fairly large number of mesh fields that really
aren't needed in any other modes; move those into their own
structure and allocate them separately.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:06 +02:00
Johannes Berg
e414eea77d mac80211: remove IEEE80211_RX_FRAGMENTED
There's a long-standing TODO item to use this flag in the cooked
monitor RX, but clearly it was never needed and now this hasn't
been used by userspace for a long time, so no userspace changes
could require it now.

Remove the unused flag.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:04 +02:00
Johannes Berg
ac100ce52a mac80211: duplicate station's MAC address for hash table
Currently, the station hash table lookup (or iteration) must
access two cachelines for each station - the one with the hash
table node, and the one with the MAC address.

Duplicate the MAC address next to the hash node to get rid of
this. Since the MAC address is static there's no consistency
problem introduced by this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:03 +02:00
Johannes Berg
981d94a801 mac80211: support device/driver PN check for CCMP/GCMP
When there are multiple RX queues, the PN checks in mac80211 cannot be
used since packets might be processed out of order on different CPUs.

Allow the driver to report that the PN has been checked, drivers that
will use multi-queue RX will have to set this flag.

For now, the flag is only valid when the frame has been decrypted, in
theory that restriction doesn't have to be there, but in practice the
hardware will have decrypted the frame already.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:02 +02:00
Johannes Berg
77c96404a4 mac80211: remove key TX/RX counter
This counter is inherently racy (since it can be incremented by RX
as well as by concurrent TX) and only available in debugfs. Instead
of fixing it to be per-CPU or similar, remove it for now. If needed
it should be added without races and with proper nl80211, perhaps
even addressing the threshold reporting TODO item that's been there
since the code was originally added.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:01 +02:00
Johannes Berg
0c028b5fd1 mac80211: remove zero-length A-MPDU subframe reporting
As there's no driver using this capability and reporting zero-length
A-MPDU subframes for radiotap monitoring, remove the capability to
free up two RX flags.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:00 +02:00
Johannes Berg
af9f9b22be mac80211: don't store napi struct
When introducing multiple RX queues, a single NAPI struct will not
be sufficient. Instead of trying to store multiple, simply change
the API to have the NAPI struct passed to the RX function. This of
course means that drivers using rx_irqsafe() cannot use NAPI, but
that seems a reasonable trade-off, particularly since only two of
all drivers are currently using it at all.

While at it, we can now remove the IEEE80211_RX_REORDER_TIMER flag
again since this code path cannot have a napi struct anyway.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:37:59 +02:00
Johannes Berg
798a457dfb mac80211: fix comment referring to RX queue
There are no RX queues in mac80211 (yet), the comment should refer
to the TID (including one slot for non-QoS) rather than 'RX queue'.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:37:58 +02:00
Johannes Berg
a682849329 mac80211: move ieee80211_get_bssid into RX file
This function is only used in the RX code, so moving it into
that file gives the compiler better optimisation possibilities
and also allows us to remove the check for short frames (which
in the RX path cannot happen, but as a generic utility needed
to be checked.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:37:57 +02:00
Johannes Berg
9ad8b21b74 mac80211: remove short frame test and counter
Short frames less than 16 octets are already blocked in the monitor
code by the should_drop_frame() function, and cannot get into the
regular RX path. Therefore, this check can never trigger and the
counter invariably stays zero. Remove the useless code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:37:55 +02:00
Johannes Berg
16bf948081 mac80211: remove sta_info.gtk_idx
This struct member is only assigned, never used otherwise;
remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:37:54 +02:00
Johannes Berg
cf47161ad2 mac80211: rename 'sta_inf' variable to more common 'sta'
We typically use 'sta' for the station info struct, and if needed
'pubsta' for the public (driver-visible) portion thereof. Do this
in the ieee80211_sta_ps_transition() function.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:37:53 +02:00
Johannes Berg
5c48f12017 mac80211: remove exposing 'mfp' to drivers
There's no driver using this, so remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:37:52 +02:00
Arik Nemtsov
923b352f19 cfg80211: use RTNL locked reg_can_beacon for IR-relaxation
The RTNL is required to check for IR-relaxation conditions that allow
more channels to beacon. Export an RTNL locked version of reg_can_beacon
and use it where possible in AP/STA interface type flows, where
IR-relaxation may be applicable.

Fixes: 06f207fc54 ("cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA")
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:02:02 +02:00
Bob Copeland
b3e7de873d mac80211: add missing length check for confirm frames
Although mesh_rx_plink_frame() already checks that frames have enough
bytes for the action code plus another two bytes for capability/reason
code, it doesn't take into account that confirm frames also have an
additional two-byte aid.  As a result, a corrupt frame could cause a
subsequent subtraction to wrap around to ill effect.  Add another
check for this case.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 14:39:42 +02:00
Bob Copeland
2ea752cd2c mac80211: correct aid location in peering frames
According to 802.11-2012 8.5.16.3.2 AID comes directly after the
capability bytes in mesh peering confirm frames.  The existing
code, however, was adding a 2 byte offset to this location,
resulting in garbage data going out over the air.  Remove the
offset to fix it.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 14:38:10 +02:00
Johannes Berg
d8d9008cfb mac80211: shut down interfaces before destroying interface list
If the hardware is unregistered while interfaces are up, mac80211 will
unregister all interfaces, which in turns causes mac80211 to be called
again to remove them all from the driver and eventually shut down the
hardware.

During this shutdown, however, it's currently already unsafe to iterate
the list of interfaces atomically, as the list is manipulated in an
unsafe manner. This puts an undue burden on the driver - it must stop
all its activities before calling ieee80211_unregister_hw(), while in
the normal stop path it can do all cleanup in the stop method. If, for
example, it's using the iteration during RX for some reason, it would
have to stop RX before unregistering to avoid crashes.

Fix this problem by closing all interfaces before unregistering them.
This will cause the driver stop to have completed before we manipulate
the interface list, and after the driver is stopped *and* has called
ieee80211_unregister_hw() it really musn't be iterating any more as
the memory will be freed as well.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 11:16:26 +02:00
Chaitanya T K
541b6ed7ce mac80211: wowlan: enable powersave if suspend while ps-polling
If for any reason we're in the middle of PS-polling or awake after
TX due to dynamic powersave while going to suspend, go back to save
power. This might cause a response frame to get lost, but since we
can't really wait for it while going to suspend that's still better
than not enabling powersave which would cause higher power usage
during (and possibly even after) suspend.

Note that this really only affects the very few drivers that use
the powersave implementation in mac80211.

Signed-off-by: Chaitanya T K <chaitanya.mgit@gmail.com>
[rewrite misleading commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 11:13:21 +02:00
Michal Kazior
e9de01907e mac80211: don't clear all tx flags when requeing
When acting as AP and a PS-Poll frame is received
associated station is marked as one in a Service
Period. This state is kept until Tx status for
released frame is reported. While a station is in
Service Period PS-Poll frames are ignored.

However if PS-Poll was received during A-MPDU
teardown it was possible to have the to-be
released frame re-queued back to pending queue.
In such case the frame was stripped of 2 important
flags:

 (a) IEEE80211_TX_CTL_NO_PS_BUFFER
 (b) IEEE80211_TX_STATUS_EOSP

Stripping of (a) led to the frame that was to be
released to be queued back to ps_tx_buf queue. If
station remained to use only PS-Poll frames the
re-queued frame (and new ones) was never actually
transmitted because mac80211 would ignore
subsequent PS-Poll frames due to station being in
Service Period. There was nothing left to clear
the Service Period bit (no xmit -> no tx status ->
no SP end), i.e. the AP would have the station
stuck in Service Period. Beacon TIM would
repeatedly prompt station to poll for frames but
it would get none.

Once (a) is not stripped (b) becomes important
because it's the main condition to clear the
Service Period bit of the station when Tx status
for the released frame is reported back.

This problem was observed with ath9k acting as P2P
GO in some testing scenarios but isn't limited to
it. AP operation with mac80211 based Tx A-MPDU
control combined with clients using PS-Poll frames
is subject to this race.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 11:06:21 +02:00
Tom Hughes
4479004e64 mac80211: clear subdir_stations when removing debugfs
If we don't do this, and we then fail to recreate the debugfs
directory during a mode change, then we will fail later trying
to add stations to this now bogus directory:

BUG: unable to handle kernel NULL pointer dereference at 0000006c
IP: [<c0a92202>] mutex_lock+0x12/0x30
Call Trace:
[<c0678ab4>] start_creating+0x44/0xc0
[<c0679203>] debugfs_create_dir+0x13/0xf0
[<f8a938ae>] ieee80211_sta_debugfs_add+0x6e/0x490 [mac80211]

Cc: stable@kernel.org
Signed-off-by: Tom Hughes <tom@compton.nu>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 10:53:19 +02:00
Linus Torvalds
02201e3f1b Minor merge needed, due to function move.
Main excitement here is Peter Zijlstra's lockless rbtree optimization to
 speed module address lookup.  He found some abusers of the module lock
 doing that too.
 
 A little bit of parameter work here too; including Dan Streetman's breaking
 up the big param mutex so writing a parameter can load another module (yeah,
 really).  Unfortunately that broke the usual suspects, !CONFIG_MODULES and
 !CONFIG_SYSFS, so those fixes were appended too.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVkgKHAAoJENkgDmzRrbjxQpwQAJVmBN6jF3SnwbQXv9vRixjH
 58V33sb1G1RW+kXxQ3/e8jLX/4VaN479CufruXQp+IJWXsN/CH0lbC3k8m7u50d7
 b1Zeqd/Yrh79rkc11b0X1698uGCSMlzz+V54Z0QOTEEX+nSu2ZZvccFS4UaHkn3z
 rqDo00lb7rxQz8U25qro2OZrG6D3ub2q20TkWUB8EO4AOHkPn8KWP2r429Axrr0K
 wlDWDTTt8/IsvPbuPf3T15RAhq1avkMXWn9nDXDjyWbpLfTn8NFnWmtesgY7Jl4t
 GjbXC5WYekX3w2ZDB9KaT/DAMQ1a7RbMXNSz4RX4VbzDl+yYeSLmIh2G9fZb1PbB
 PsIxrOgy4BquOWsJPm+zeFPSC3q9Cfu219L4AmxSjiZxC3dlosg5rIB892Mjoyv4
 qxmg6oiqtc4Jxv+Gl9lRFVOqyHZrTC5IJ+xgfv1EyP6kKMUKLlDZtxZAuQxpUyxR
 HZLq220RYnYSvkWauikq4M8fqFM8bdt6hLJnv7bVqllseROk9stCvjSiE3A9szH5
 OgtOfYV5GhOeb8pCZqJKlGDw+RoJ21jtNCgOr6DgkNKV9CX/kL/Puwv8gnA0B0eh
 dxCeB7f/gcLl7Cg3Z3gVVcGlgak6JWrLf5ITAJhBZ8Lv+AtL2DKmwEWS/iIMRmek
 tLdh/a9GiCitqS0bT7GE
 =tWPQ
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "Main excitement here is Peter Zijlstra's lockless rbtree optimization
  to speed module address lookup.  He found some abusers of the module
  lock doing that too.

  A little bit of parameter work here too; including Dan Streetman's
  breaking up the big param mutex so writing a parameter can load
  another module (yeah, really).  Unfortunately that broke the usual
  suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were
  appended too"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits)
  modules: only use mod->param_lock if CONFIG_MODULES
  param: fix module param locks when !CONFIG_SYSFS.
  rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE()
  module: add per-module param_lock
  module: make perm const
  params: suppress unused variable error, warn once just in case code changes.
  modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'.
  kernel/module.c: avoid ifdefs for sig_enforce declaration
  kernel/workqueue.c: remove ifdefs over wq_power_efficient
  kernel/params.c: export param_ops_bool_enable_only
  kernel/params.c: generalize bool_enable_only
  kernel/module.c: use generic module param operaters for sig_enforce
  kernel/params: constify struct kernel_param_ops uses
  sysfs: tightened sysfs permission checks
  module: Rework module_addr_{min,max}
  module: Use __module_address() for module_address_lookup()
  module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING
  module: Optimize __module_address() using a latched RB-tree
  rbtree: Implement generic latch_tree
  seqlock: Introduce raw_read_seqcount_latch()
  ...
2015-07-01 10:49:25 -07:00
Linus Torvalds
e0456717e4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Add TX fast path in mac80211, from Johannes Berg.

 2) Add TSO/GRO support to ibmveth, from Thomas Falcon

 3) Move away from cached routes in ipv6, just like ipv4, from Martin
    KaFai Lau.

 4) Lots of new rhashtable tests, from Thomas Graf.

 5) Run ingress qdisc lockless, from Alexei Starovoitov.

 6) Allow servers to fetch TCP packet headers for SYN packets of new
    connections, for fingerprinting.  From Eric Dumazet.

 7) Add mode parameter to pktgen, for testing receive.  From Alexei
    Starovoitov.

 8) Cache access optimizations via simplifications of build_skb(), from
    Alexander Duyck.

 9) Move page frag allocator under mm/, also from Alexander.

10) Add xmit_more support to hv_netvsc, from KY Srinivasan.

11) Add a counter guard in case we try to perform endless reclassify
    loops in the packet scheduler.

12) Extern flow dissector to be programmable and use it in new "Flower"
    classifier.  From Jiri Pirko.

13) AF_PACKET fanout rollover fixes, performance improvements, and new
    statistics.  From Willem de Bruijn.

14) Add netdev driver for GENEVE tunnels, from John W Linville.

15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso.

16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet.

17) Add an ECN retry fallback for the initial TCP handshake, from Daniel
    Borkmann.

18) Add tail call support to BPF, from Alexei Starovoitov.

19) Add several pktgen helper scripts, from Jesper Dangaard Brouer.

20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa.

21) Favor even port numbers for allocation to connect() requests, and
    odd port numbers for bind(0), in an effort to help avoid
    ip_local_port_range exhaustion.  From Eric Dumazet.

22) Add Cavium ThunderX driver, from Sunil Goutham.

23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata,
    from Alexei Starovoitov.

24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai.

25) Double TCP Small Queues default to 256K to accomodate situations
    like the XEN driver and wireless aggregation.  From Wei Liu.

26) Add more entropy inputs to flow dissector, from Tom Herbert.

27) Add CDG congestion control algorithm to TCP, from Kenneth Klette
    Jonassen.

28) Convert ipset over to RCU locking, from Jozsef Kadlecsik.

29) Track and act upon link status of ipv4 route nexthops, from Andy
    Gospodarek.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits)
  bridge: vlan: flush the dynamically learned entries on port vlan delete
  bridge: multicast: add a comment to br_port_state_selection about blocking state
  net: inet_diag: export IPV6_V6ONLY sockopt
  stmmac: troubleshoot unexpected bits in des0 & des1
  net: ipv4 sysctl option to ignore routes when nexthop link is down
  net: track link-status of ipv4 nexthops
  net: switchdev: ignore unsupported bridge flags
  net: Cavium: Fix MAC address setting in shutdown state
  drivers: net: xgene: fix for ACPI support without ACPI
  ip: report the original address of ICMP messages
  net/mlx5e: Prefetch skb data on RX
  net/mlx5e: Pop cq outside mlx5e_get_cqe
  net/mlx5e: Remove mlx5e_cq.sqrq back-pointer
  net/mlx5e: Remove extra spaces
  net/mlx5e: Avoid TX CQE generation if more xmit packets expected
  net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion
  net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq()
  net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them
  net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues
  net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device
  ...
2015-06-24 16:49:49 -07:00
David S. Miller
3a07bd6fea Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/mellanox/mlx4/main.c
	net/packet/af_packet.c

Both conflicts were cases of simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24 02:58:51 -07:00
Dan Streetman
b51d23e4e9 module: add per-module param_lock
Add a "param_lock" mutex to each module, and update params.c to use
the correct built-in or module mutex while locking kernel params.
Remove the kparam_block_sysfs_r/w() macros, replace them with direct
calls to kernel_param_[un]lock(module).

The kernel param code currently uses a single mutex to protect
modification of any and all kernel params.  While this generally works,
there is one specific problem with it; a module callback function
cannot safely load another module, i.e. with request_module() or even
with indirect calls such as crypto_has_alg().  If the module to be
loaded has any of its params configured (e.g. with a /etc/modprobe.d/*
config file), then the attempt will result in a deadlock between the
first module param callback waiting for modprobe, and modprobe trying to
lock the single kernel param mutex to set the new module's param.

This fixes that by using per-module mutexes, so that each individual module
is protected against concurrent changes in its own kernel params, but is
not blocked by changes to other module params.  All built-in modules
continue to use the built-in mutex, since they will always be loaded at
runtime and references (e.g. request_module(), crypto_has_alg()) to them
will never cause load-time param changing.

This also simplifies the interface used by modules to block sysfs access
to their params; while there are currently functions to block and unblock
sysfs param access which are split up by read and write and expect a single
kernel param to be passed, their actual operation is identical and applies
to all params, not just the one passed to them; they simply lock and unlock
the global param mutex.  They are replaced with direct calls to
kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or
if the module is built-in, it locks the built-in mutex.

Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-06-23 15:27:38 +09:30
Linus Torvalds
44d21c3f3a Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 "Here is the crypto update for 4.2:

  API:

   - Convert RNG interface to new style.

   - New AEAD interface with one SG list for AD and plain/cipher text.
     All external AEAD users have been converted.

   - New asymmetric key interface (akcipher).

  Algorithms:

   - Chacha20, Poly1305 and RFC7539 support.

   - New RSA implementation.

   - Jitter RNG.

   - DRBG is now seeded with both /dev/random and Jitter RNG.  If kernel
     pool isn't ready then DRBG will be reseeded when it is.

   - DRBG is now the default crypto API RNG, replacing krng.

   - 842 compression (previously part of powerpc nx driver).

  Drivers:

   - Accelerated SHA-512 for arm64.

   - New Marvell CESA driver that supports DMA and more algorithms.

   - Updated powerpc nx 842 support.

   - Added support for SEC1 hardware to talitos"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (292 commits)
  crypto: marvell/cesa - remove COMPILE_TEST dependency
  crypto: algif_aead - Temporarily disable all AEAD algorithms
  crypto: af_alg - Forbid the use internal algorithms
  crypto: echainiv - Only hold RNG during initialisation
  crypto: seqiv - Add compatibility support without RNG
  crypto: eseqiv - Offer normal cipher functionality without RNG
  crypto: chainiv - Offer normal cipher functionality without RNG
  crypto: user - Add CRYPTO_MSG_DELRNG
  crypto: user - Move cryptouser.h to uapi
  crypto: rng - Do not free default RNG when it becomes unused
  crypto: skcipher - Allow givencrypt to be NULL
  crypto: sahara - propagate the error on clk_disable_unprepare() failure
  crypto: rsa - fix invalid select for AKCIPHER
  crypto: picoxcell - Update to the current clk API
  crypto: nx - Check for bogus firmware properties
  crypto: marvell/cesa - add DT bindings documentation
  crypto: marvell/cesa - add support for Kirkwood and Dove SoCs
  crypto: marvell/cesa - add support for Orion SoCs
  crypto: marvell/cesa - add allhwsupport module parameter
  crypto: marvell/cesa - add support for all armada SoCs
  ...
2015-06-22 21:04:48 -07:00
Johannes Berg
51f458d961 mac80211: fix locking in update_vlan_tailroom_need_count()
Unfortunately, Michal's change to fix AP_VLAN crypto tailroom
caused a locking issue that was reported by lockdep, but only
in a few cases - the issue was a classic ABBA deadlock caused
by taking the mtx after the key_mtx, where normally they're
taken the other way around.

As the key mutex protects the field in question (I'm adding a
few annotations to make that clear) only the iteration needs
to be protected, but we can also iterate the interface list
with just RCU protection while holding the key mutex.

Fixes: f9dca80b98 ("mac80211: fix AP_VLAN crypto tailroom calculation")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-21 10:06:07 -07:00
Johannes Berg
30686bf7f5 mac80211: convert HW flags to unsigned long bitmap
As we're running out of hardware capability flags pretty quickly,
convert them to use the regular test_bit() style unsigned long
bitmaps.

This introduces a number of helper functions/macros to set and to
test the bits, along with new debugfs code.

The occurrences of an explicit __clear_bit() are intentional, the
drivers were never supposed to change their supported bits on the
fly. We should investigate changing this to be a per-frame flag.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-10 16:05:36 +02:00
Johannes Berg
206c59d1d7 Merge remote-tracking branch 'net-next/master' into mac80211-next
Merge back net-next to get wireless driver changes (from Kalle)
to be able to create the API change across all trees properly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-10 12:45:09 +02:00
Alexis Green
5ec596c41b mac80211: Fix a case of incorrect metric used when forwarding a PREQ
This patch fixes a bug in hwmp_preq_frame_process where the wrong metric
can be used when forwarding a PREQ. This happens because the code uses
the same metric variable to record the value of the metric to the source
of the PREQ and the value of the metric to the target of the PREQ.

This comes into play when both reply and forward are set which happens
when IEEE80211_PREQ_PROACTIVE_PREP_FLAG is set and when MP_F_DO | MP_F_RF
is set. The original code had a special case to handle the first case
but not the second.

The patch uses distinct variables for the two metrics which makes the
code flow much clearer and removes the need to restore the original
value of metric when forwarding.

Signed-off-by: Alexis Green <agreen@cococorp.com>
CC: Jesse Jones <jjones@cococorp.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-10 11:52:59 +02:00
Alexis Green
e060e7adc2 mac80211: Always check rates and capabilities in mesh mode
In mesh mode there is a race between establishing links and processing
rates and capabilities in beacons. This is very noticeable with slow
beacons (e.g. beacon intervals of 1s) and manifested for us as stations
using minstrel when minstrel_ht should be used. Fixed by changing
mesh_sta_info_init so that it always checks rates and such if it has not
already done so.

Signed-off-by: Alexis Green <agreen@cococorp.com>
CC: Jesse Jones <jjones@cococorp.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09 22:05:06 +02:00
Chun-Yeow Yeoh
8df734e865 mac80211: fix the beacon csa counter for mesh and ibss
The csa counter has moved from sdata to beacon/presp but
it is not updated accordingly for mesh and ibss. Fix this.

Fixes: af296bdb8d ("mac80211: move csa counters from sdata to beacon/presp")
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09 22:04:25 +02:00
Alexis Green
afd2efb919 mac80211: Fix incorrectly named last_hop_metric variable in mesh_rx_path_sel_frame
The last hop metric should refer to link cost (this is how
hwmp_route_info_get uses it for example). But in mesh_rx_path_sel_frame
we are not dealing with link cost but with the total cost to the origin
of a PREQ or PREP.

Signed-off-by: Alexis Green <agreen@cococorp.com>
CC: Jesse Jones <jjones@cococorp.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09 21:53:35 +02:00
Sara Sharon
74d803b602 mac80211: ignore invalid scan RSSI values
Channels in 2.4GHz band overlap, this means that if we
send a probe request on channel 1 and then move to channel
2, we will hear the probe response on channel 2. In this
case, the RSSI will be lower than if we had heard it on
the channel on which it was sent (1 in this case).

The scan result ignores those invalid values and the
station last signal should not be updated as well.

In case the scan determines the signal to be invalid turn on
the flag so the station last signal will not be updated with
the value and thus user space probing for NL80211_STA_INFO_SIGNAL
and NL80211_STA_INFO_SIGNAL_AVG will not get this invalid RSSI
value.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09 21:51:59 +02:00
Michal Kazior
d01f858c78 mac80211: release channel on auth failure
There were a few rare cases when upon
authentication failure channel wasn't released.
This could cause stale pointers to remain in
chanctx assigned_vifs after interface removal and
trigger general protection fault later.

This could be triggered, e.g. on ath10k with the
following steps:

 1. start an AP
 2. create 2 extra vifs on ath10k host
 3. connect vif1 to the AP
 4. connect vif2 to the AP
    (auth fails because ath10k firmware isn't able
     to maintain 2 peers with colliding AP mac
     addresses across vifs and consequently
     refuses sta_info_insert() in
     ieee80211_prep_connection())
 5. remove the 2 extra vifs
 6. goto step 2; at step 3 kernel was crashing:

 general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
 Modules linked in: ath10k_pci ath10k_core ath
 ...
 Call Trace:
  [<ffffffff81a2dabb>] ieee80211_check_combinations+0x22b/0x290
  [<ffffffff819fb825>] ? ieee80211_check_concurrent_iface+0x125/0x220
  [<ffffffff8180f664>] ? netpoll_poll_disable+0x84/0x100
  [<ffffffff819fb833>] ieee80211_check_concurrent_iface+0x133/0x220
  [<ffffffff81a0029e>] ieee80211_open+0x3e/0x80
  [<ffffffff817f2d26>] __dev_open+0xb6/0x130
  [<ffffffff817f3051>] __dev_change_flags+0xa1/0x170
 ...
 RIP  [<ffffffff81a23140>] ieee80211_chanctx_radar_detect+0xa0/0x170

 (gdb) l * ieee80211_chanctx_radar_detect+0xa0
 0xffffffff81a23140 is in ieee80211_chanctx_radar_detect (/devel/src/linux/net/mac80211/util.c:3182).
 3177             */
 3178            WARN_ON(ctx->replace_state == IEEE80211_CHANCTX_REPLACES_OTHER &&
 3179                    !list_empty(&ctx->assigned_vifs));
 3180
 3181            list_for_each_entry(sdata, &ctx->assigned_vifs, assigned_chanctx_list)
 3182                    if (sdata->radar_required)
 3183                            radar_detect |= BIT(sdata->vif.bss_conf.chandef.width);
 3184
 3185            return radar_detect;

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09 21:51:01 +02:00
Johannes Berg
472be00d04 mac80211: handle aggregation session timeout on fast-xmit path
The conversion to the fast-xmit path lost proper aggregation session
timeout handling - the last_tx wasn't set on that path and the timer
would therefore incorrectly tear down the session periodically (with
those drivers/rate control algorithms that have a timeout.)

In case of iwlwifi, this was every 5 seconds and caused significant
throughput degradation.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09 21:38:40 +02:00
Johannes Berg
c526a46767 mac80211: rename single hw-scan flag to follow naming convention
The naming convention is to always have the flags prefixed with
IEEE80211_HW_ so they're 'namespaced', make this flag follow it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-02 20:32:00 +02:00
Johannes Berg
ea1b2b45f5 mac80211: remove short slot/short preamble incapable flags
There are no drivers setting IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE
or IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE, so any code using the
two flags is dead; it's also exceedingly unlikely that any new driver
could ever need to set these flags.

The wcn36xx code is almost certainly broken, but this preserves the
previous behaviour.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-02 20:28:58 +02:00
Johannes Berg
3b79af973c mac80211: stop using pointers as userspace cookies
Even if the pointers are really only accessible to root and used
pretty much only by wpa_supplicant, this is still not great; even
for debugging it'd be easier to have something that's easier to
read and guaranteed to never get reused.

With the recent change to make mac80211 create an ack_skb for the
mgmt-tx path this becomes possible, only the client probe method
needs to also allocate an ack_skb, and we can store the cookie in
that skb.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-02 13:07:59 +02:00
Johannes Berg
b2eb0ee6d0 mac80211: copy nl80211 mgmt TX SKB for status
When we return the TX status for an nl80211 mgmt TX SKB, we
should also return the original frame with the status to
allow userspace to match up the submission (it could also
use the cookie but both ways are permissible.)

As TX SKBs could be encrypted, at least in the case of ANQP
while associated with the AP, copy the original SKB, store
it with an ACK frame ID and restructure the status path to
use that to return status with the original SKB. Otherwise,
userspace (in particular wpa_supplicant) will get confused.

Reported-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-02 13:07:55 +02:00
Johannes Berg
db388a567f mac80211: move TX PN to public part of key struct
For drivers supporting TSO or similar features, but that still have
PN assignment in software, there's a need to have some memory to
store the current PN value. As mac80211 already stores this and it's
somewhat complicated to add a per-driver area to the key struct (due
to the dynamic sizing thereof) it makes sense to just move the TX PN
to the keyconf, i.e. the public part of the key struct.

As TKIP is more complicated and we won't able to offload it in this
way right now (fast-xmit is skipped for TKIP unless the HW does it
all, and our hardware needs MMIC calculation in software) I've not
moved that for now - it's possible but requires exposing a lot of
the internal TKIP state.

As an bonus side effect, we can remove a lot of code by assuming the
keyseq struct has a certain layout - with BUILD_BUG_ON to verify it.

This might also improve performance, since now TX and RX no longer
share a cacheline.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-02 11:16:35 +02:00
David S. Miller
dda922c831 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/phy/amd-xgbe-phy.c
	drivers/net/wireless/iwlwifi/Kconfig
	include/net/mac80211.h

iwlwifi/Kconfig and mac80211.h were both trivial overlapping
changes.

The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and
the bug fix that happened on the 'net' side is already integrated
into the rest of the amd-xgbe driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01 22:51:30 -07:00
Johannes Berg
c9c99f8938 mac80211: act upon and report deauth while associating
When trying to associate, the AP could send a deauth frame instead.
Currently mac80211 drops that frame and doesn't report it to the
supplicant, which, in some versions and/or in certain circumstances
will simply keep trying to associate over and over again instead of
trying authentication again.

Fix this by reacting to deauth frames while associating, reporting
them to the supplicant and dropping the association attempt (which
is bound to fail.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-01 14:10:27 +02:00
David S. Miller
d803731462 As we get closer to the merge window, here are a few
more things for -next:
  * disconnect TDLS stations on CSA to avoid issues
  * fix a memory leak introduced in a recent commit
  * switch rfkill and cfg80211 to PM ops
  * in an unlikely scenario, prevent a bookkeeping
    value to get corrupted leading to dropped packets
  * fix a crash in VLAN assignment
  * switch rfkill-gpio to more modern gpiod API
  * send disconnected event to userspace with proper
    local/remote indication
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJVaEyAAAoJEDBSmw7B7bqrPiIQAKOrX4g2UNtyoTWJzA7YRu+g
 GEUu/CE4LQKCodCpBiEhFlhQo2WzXsHoLj5+Nr56aFAZx19VZjXWVC5JS785wYn5
 r8hpOVWUUA3MVnXeL/+yz4chm0wTYN9pSpElZ4FHlUI0OkCMh2rPCTvdrbSKoGzV
 MN8NEO0jVE89AgOMF8gHk5YKpJ6B4QibZuUuZpgkqdwIi5udaCcrPFFrUg/NfRpA
 nTauP6blFUPOUV0sxbhS78uC3rqGQuYsnvab/QeGc9PDKk5ukrXzFdgRCVZq8224
 Ge0JcPzwzWldk892oEJoc2OfGkg5HOil9HtC+S2ehBGuK0yEXOBIkO1ZgudTH1kC
 0rLOPWVKRzTWE+sq+gWK/OjfaA7Dl6HFYYHRQ2dhm1XkqtAw8SwGQMDSIPJYWr4O
 jp4gYpwKVjnMmsEAg7FdKWyIiTgLyI07VnIciORXDyefddYMuofXI2pJkfzUeFeH
 HjCVYm2NYXDty6uneP4RC1nUbNc53FKJ5O9fW3BPMyVXD4pTjam50p9H6N7OcDN3
 k3dEevWiVgvBjZPVc3HI8RaCzS/Ww1ym+MYgV97QkMfgiuE2VkiFwK+zhWn9axbc
 eutkzFEdDcIACCZ74hIWqMJjsMnZm9E11Uq7tifAE0bi1Wpku1xPAnxMPnI+0eiF
 Dgo2bmlQ/d1dHr3N3FC0
 =KmwY
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2015-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
As we get closer to the merge window, here are a few
more things for -next:
 * disconnect TDLS stations on CSA to avoid issues
 * fix a memory leak introduced in a recent commit
 * switch rfkill and cfg80211 to PM ops
 * in an unlikely scenario, prevent a bookkeeping
   value to get corrupted leading to dropped packets
 * fix a crash in VLAN assignment
 * switch rfkill-gpio to more modern gpiod API
 * send disconnected event to userspace with proper
   local/remote indication
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-31 17:34:26 -07:00
Michal Kazior
ab499db80f mac80211: prevent possible crypto tx tailroom corruption
There was a possible race between
ieee80211_reconfig() and
ieee80211_delayed_tailroom_dec(). This could
result in inability to transmit data if driver
crashed during roaming or rekeying and subsequent
skbs with insufficient tailroom appeared.

This race was probably never seen in the wild
because a device driver would have to crash AND
recover within 0.5s which is very unlikely.

I was able to prove this race exists after
changing the delay to 10s locally and crashing
ath10k via debugfs immediately after GTK
rekeying. In case of ath10k the counter went below
0. This was harmless but other drivers which
actually require tailroom (e.g. for WEP ICV or
MMIC) could end up with the counter at 0 instead
of >0 and introduce insufficient skb tailroom
failures because mac80211 would not resize skbs
appropriately anymore.

Fixes: 8d1f7ecd2a ("mac80211: defer tailroom counter manipulation when roaming")
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-29 13:04:46 +02:00
Herbert Xu
957e0fe629 mac80211: Switch to new AEAD interface
This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.

Tested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:20 +08:00
David S. Miller
36583eb54d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/cadence/macb.c
	drivers/net/phy/phy.c
	include/linux/skbuff.h
	net/ipv4/tcp.c
	net/switchdev/switchdev.c

Switchdev was a case of RTNH_H_{EXTERNAL --> OFFLOAD}
renaming overlapping with net-next changes of various
sorts.

phy.c was a case of two changes, one adding a local
variable to a function whilst the second was removing
one.

tcp.c overlapped a deadlock fix with the addition of new tcp_info
statistic values.

macb.c involved the addition of two zyncq device entries.

skbuff.h involved adding back ipv4_daddr to nf_bridge_info
whilst net-next changes put two other existing members of
that struct into a union.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-23 01:22:35 -04:00
Arik Nemtsov
c5a71688e1 mac80211: disconnect TDLS stations on STA CSA
When a station does a channel switch, it's not well defined what its TDLS
peers would do. Avoid a situation when the local side marks a potentially
disconnected peer as a TDLS peer.
Keeping peers connected through CSA is doubly problematic with the upcoming
TDLS WIDER-BW feature which allows peers to widen the BSS channel. The
new channel transitioned-to might not be compatible and would require
a re-negotiation anyway.

Make sure to disallow new TDLS link during CSA.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-20 15:14:54 +02:00
Michal Kazior
f9dca80b98 mac80211: fix AP_VLAN crypto tailroom calculation
Some splats I was seeing:

 (a) WARNING: CPU: 1 PID: 0 at /devel/src/linux/net/mac80211/wep.c:102 ieee80211_wep_add_iv
 (b) WARNING: CPU: 1 PID: 0 at /devel/src/linux/net/mac80211/wpa.c:73 ieee80211_tx_h_michael_mic_add
 (c) WARNING: CPU: 3 PID: 0 at /devel/src/linux/net/mac80211/wpa.c:433 ieee80211_crypto_ccmp_encrypt

I've seen (a) and (b) with ath9k hw crypto and (c)
with ath9k sw crypto. All of them were related to
insufficient skb tailroom and I was able to
trigger these with ping6 program.

AP_VLANs may inherit crypto keys from parent AP.
This wasn't considered and yielded problems in
some setups resulting in inability to transmit
data because mac80211 wouldn't resize skbs when
necessary and subsequently drop some packets due
to insufficient tailroom.

For efficiency purposes don't inspect both AP_VLAN
and AP sdata looking for tailroom counter. Instead
update AP_VLAN tailroom counters whenever their
master AP tailroom counter changes.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-20 15:10:11 +02:00
Johannes Berg
252ec2b3aa mac80211: don't split remain-on-channel for coalescing
Due to remain-on-channel scheduling delays, when we split an ROC
while coalescing, we'll usually get a picture like this:

existing ROC:  |------------------|
current time:              ^
new ROC:                   |------|              |-------|

If the expected response frames are then transmitted by the peer
in the hole between the two fragments of the new ROC, we miss
them and the process (e.g. ANQP query) fails.

mac80211 expects that the window to miss something is small:

existing ROC:  |------------------|
new ROC:                   |------||-------|

but that's normally not the case.

To avoid this problem, coalesce only if the new ROC's duration
is <= the remaining time on the existing one:

existing ROC:  |------------------|
new ROC:                   |-----|

and never split a new one but schedule it afterwards instead:

existing ROC:  |------------------|
new ROC:                                       |-------------|

type=bugfix
bug=not-tracked
fixes=unknown

Reported-by: Matti Gottlieb <matti.gottlieb@intel.com>
Reviewed-by: EliadX Peller <eliad@wizery.com>
Reviewed-by: Matti Gottlieb <matti.gottlieb@intel.com>
Tested-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-20 15:09:22 +02:00
Michal Kazior
464daaf04c mac80211: check fast-xmit on station change
Drivers with fast-xmit (e.g. ath10k) running in
AP_VLAN setups would fail to communicate with
connected 4addr stations.

The reason was when new station associates it
first goes into master AP interface. It is not
until later that a dedicated AP_VLAN is created
for it and the station itself is moved there.
After that Tx directed at the station should use
4addr header. However fast-xmit wasn't
recalculated and 3addr header remained to be used.
This in turn caused the connected 4addr stations
to drop packets coming from the AP until some
other event would cause fast-xmit to recalculate
for that station (which could never come).

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-20 15:08:36 +02:00
Johannes Berg
94c78cb452 mac80211: fix memory leak
My recent change here introduced a possible memory leak if the
driver registers an invalid cipher schemes. This won't really
happen in practice, but fix the leak nonetheless.

Fixes: e3a55b5399 ("mac80211: validate cipher scheme PN length better")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-20 11:37:38 +02:00
David S. Miller
b7a3a8e31f This just has a few fixes:
* LED throughput trigger was crashing
  * fast-xmit wasn't treating QoS changes in IBSS correctly
  * TDLS could use the wrong channel definition
  * using a reserved channel context could use the wrong channel width
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJVWuPvAAoJEDBSmw7B7bqr/A4P/0TqzkCC5L2qJvi3a6QNFxvf
 s3riQMJ8WQeUxCRNgFNeeeNUAgSJn3hhiINGrjRmkwXXxYC4mbCwM0YXNT+WhSRL
 /Kx4mRJr7u5ZU0olW+KRvIV5CyTsbr9zVnaraCh5NV43nT87ZVZRBKC9vz2UkSM5
 AsN6fUvhWMGhhHoGGDqtjRBjve8Xs5iKiEcE1iQTzLOPnFP3dKtB1zKKiA0JCQs4
 OjxkQ7uaF0T1IfkMFr0gyzgQi4A8iPoMKV3qcRIH/QZN5dpJ6DR1dgaU50CrzQ+R
 JD9W09ifF9U8GnvQU/baJHKCxEvnQWO2XwlV4+mV6bXF1j5Ng4LRiXntIeu2d3T3
 5JuvPV9cNJb8dSTzsYw+TRJg73hStlJCAjVMJ7hiOMQc1YCCY9Exrff0pWzJPJfE
 NygIkMHXymcy66yL3b7DIIXro5jHNVGVoHq3vMB+W+/EcEDFN6L9LeCzUVo+oKjl
 Qg4kC7VHDjcdt0f7Vgv2Cal76ZVfCZaq74QZV1cySF2sCiD27LnAAfoHVeMY979K
 qBsCRqhkBlc7ntnstv6tGz9LfG8ro+Fv548HIUDG80capZl6N6FR6g+8hYIuvJwu
 2abJq36bp/NAGDt43UofmtDxyZNyvoKmzcQKSdn2QpryGKQ3uRcDHG/I+WD0yWX9
 4WFNEm86sXmfL/Eyu0lU
 =iUFe
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2015-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
This just has a few fixes:
 * LED throughput trigger was crashing
 * fast-xmit wasn't treating QoS changes in IBSS correctly
 * TDLS could use the wrong channel definition
 * using a reserved channel context could use the wrong channel width
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-19 16:43:17 -04:00
Johannes Berg
22d3a3c829 mac80211: don't use napi_gro_receive() outside NAPI context
No matter how the driver manages its NAPI context, there's no way
sending frames to it from a timer can be correct, since it would
corrupt the internal GRO lists.

To avoid that, always use the non-NAPI path when releasing frames
from the timer.

Cc: stable@vger.kernel.org
Reported-by: Jean Trivelly <jean.trivelly@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-19 15:46:21 +02:00
David S. Miller
b04096ff33 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Four minor merge conflicts:

1) qca_spi.c renamed the local variable used for the SPI device
   from spi_device to spi, meanwhile the spi_set_drvdata() call
   got moved further up in the probe function.

2) Two changes were both adding new members to codel params
   structure, and thus we had overlapping changes to the
   initializer function.

3) 'net' was making a fix to sk_release_kernel() which is
   completely removed in 'net-next'.

4) In net_namespace.c, the rtnl_net_fill() call for GET operations
   had the command value fixed, meanwhile 'net-next' adjusted the
   argument signature a bit.

This also matches example merge resolutions posted by Stephen
Rothwell over the past two days.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 14:31:43 -04:00
Johannes Berg
658358cec9 mac80211: fix throughput LED trigger
As I was testing with hwsim, I missed that my previous commit to
make LED work depend on activation broke the code because I missed
removing the old trigger struct and some code was still using it,
now erroneously, causing crashes.

Fix this by always using the correct struct.

Reported-by: Felix Fietkau <nbd@openwrt.org>
Tested-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-11 19:16:04 +02:00
Arik Nemtsov
890b7878e4 mac80211: TDLS: use the BSS chandef for HT/VHT operation IEs
The chandef of the current channel context might be wider (though
compatible). The TDLS link cares only about the channel of the BSS.

In addition make sure to specify the VHT operation IE when VHT is supported
on a non-2.4GHz band, as required by IEEE802.11ac-2013. This is not the
same as HT-operation, to be specified only if the BSS doesn't support HT.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-11 14:52:15 +02:00
Janusz Dziedzic
47b4e1fc49 mac80211: move WEP tailroom size check
Remove checking tailroom when adding IV as it uses only
headroom, and move the check to the ICV generation that
actually needs the tailroom.

In other case I hit such warning and datapath don't work,
when testing:
- IBSS + WEP
- ath9k with hw crypt enabled
- IPv6 data (ping6)

WARNING: CPU: 3 PID: 13301 at net/mac80211/wep.c:102 ieee80211_wep_add_iv+0x129/0x190 [mac80211]()
[...]
Call Trace:
[<ffffffff817bf491>] dump_stack+0x45/0x57
[<ffffffff8107746a>] warn_slowpath_common+0x8a/0xc0
[<ffffffff8107755a>] warn_slowpath_null+0x1a/0x20
[<ffffffffc09ae109>] ieee80211_wep_add_iv+0x129/0x190 [mac80211]
[<ffffffffc09ae7ab>] ieee80211_crypto_wep_encrypt+0x6b/0xd0 [mac80211]
[<ffffffffc09d3fb1>] invoke_tx_handlers+0xc51/0xf30 [mac80211]
[...]

Cc: stable@vger.kernel.org
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-11 14:51:29 +02:00
Johannes Berg
96a4688edb mac80211: check fast-xmit if IBSS STA QoS changed
When an IBSS station gets QoS enabled after having been added,
check fast-xmit to make sure the QoS header gets added to the
cache properly and frames can go out with QoS and higher rates.

Reported-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-11 14:01:36 +02:00
Andrei Otcheretianski
bf45a24243 mac80211: adjust reserved chan_ctx when assigned to vif
When a vif starts using a reserved channel context (during CSA, for example)
the required chandef was recalculated, however it was never applied.
This could result in using chanctx with narrower width than actually
required. Fix this by calling ieee80211_change_chanctx with the recalculated
chandef. This both changes the chanctx's width and recalcs min_def.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-07 14:24:52 +02:00
Johannes Berg
bbbe8c8c59 mac80211: add missing documentation for rate_ctrl_lock
This was missed in the previous patch, add some documentation
for rate_ctrl_lock to avoid docbook warnings.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-06 16:00:32 +02:00
Johannes Berg
e3a55b5399 mac80211: validate cipher scheme PN length better
Currently, a cipher scheme can advertise an arbitrarily long
sequence counter, but mac80211 only supports up to 16 bytes
and the initial value from userspace will be truncated.

Fix two things:
 * don't allow the driver to register anything longer than
   the 16 bytes that mac80211 reserves space for
 * require userspace to specify a starting value with the
   correct length (or none at all)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-06 13:30:00 +02:00
Johannes Berg
a31cf1c69e mac80211: extend get_key() to return PN for all ciphers
For ciphers not supported by mac80211, the function currently
doesn't return any PN data. Fix this by extending the driver's
get_key_seq() a little more to allow moving arbitrary PN data.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-06 13:30:00 +02:00
Johannes Berg
9352c19f63 mac80211: extend get_tkip_seq to all keys
Extend the function to read the TKIP IV32/IV16 to read the IV/PN for
all ciphers in order to allow drivers with full hardware crypto to
properly support this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-06 13:29:59 +02:00
Johannes Berg
f603f1f342 mac80211: remove useless skb->encapsulation check
No current (and planned, as far as I know) wifi devices support
encapsulation checksum offload, so remove the useless test here.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-05 15:25:33 +02:00
Johannes Berg
8d5c258568 mac80211: make LED triggering depend on activation
When LED triggers are compiled in, but not used, mac80211 will still
call them to update the status. This isn't really a problem for the
assoc and radio ones, but the TX/RX (and to a certain extend TPT)
ones can be called very frequently (for every packet.)

In order to avoid that when they're not used, track their activation
and call the corresponding trigger (and in the TPT case, account for
throughput) only when the trigger is actually used by an LED.

Additionally, make those trigger functions inlines since theyre only
used once in the remaining code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-05 14:21:56 +02:00
Johannes Berg
f5c4ae0799 mac80211: make LED trigger names const
This is just a code cleanup, make the LED trigger names const
as they're not expected to be modified by drivers.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-05 14:21:55 +02:00
Johannes Berg
56ff51084e mac80211: clean up station debugfs
Remove items that can be retrieved through nl80211. This also
removes two items (tx_packets and tx_bytes) where only the VO
counter was exposed since they are split up per AC but in the
debugfs file only the first AC was shown.

Also remove the useless "dev" file - the stations have long
been in a sub-directory of the netdev so there's no need for
that any more.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-05 14:21:55 +02:00
Johannes Berg
f83f1c129a mac80211: remove sta->tx_fragments counter
This counter is unsafe with concurrent TX and is only exposed
through debugfs and ethtool. Instead of trying to fix it just
remove it for now, if it's really needed then it should be
exposed through nl80211 and in a way that drivers that do the
fragmentation in the device could support it as well.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-05 14:21:55 +02:00
Johannes Berg
c206ca6709 mac80211: move dot11 counters under MAC80211_DEBUG_COUNTERS
Since these counters can only be read through debugfs, there's
very little point in maintaining them all the time. However,
even just making them depend on debugfs is pointless - they're
not normally used. Additionally a number of them aren't even
concurrency safe.

Move them under MAC80211_DEBUG_COUNTERS so they're normally
not even compiled in.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-05 14:21:54 +02:00
Johannes Berg
f1160434c7 mac80211: clean up global debugfs statistics
The debugfs statistics macros are pointlessly verbose, so change
that macro to just have a single argument. While at it, remove
the unused counters and rename rx_expand_skb_head2 to the better
rx_expand_skb_head_defrag.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-05 14:21:54 +02:00
Matti Gottlieb
b8e69d51ff mac80211: force off channel transmission for public action frames
Currently while associated to an AP and sending a (public) action
frame to a different AP on the same channel, the action frame will
be sent like a regular tx frame without going off channel.

When power save is enabled this can cause problems, since the device
can go into power save and miss the response to the action frame
that is sent by the other AP.

Force off-channel transmission to avoid this issue in case
- HW offchannel is used,
- the user didn't forbid transmitting frames off channel
- the frame is not sent to the AP that we are associated with
  (if it is we assume the response would be bufferable)

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[reword commit message a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 12:27:17 +02:00
Emmanuel Grumbach
b497de63ad mac80211: notify the driver on reordering buffer timeout
When frames time out in the reordering buffer, it is a
good indication that something went wrong and the driver
may want to know about that to take action or trigger
debug flows.
It is pointless to notify the driver about each frame that
is released. Notify each time the timer fires.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 12:25:01 +02:00
Emmanuel Grumbach
6382246e89 mac80211: notify the driver upon BAR Rx
When we receive a BAR, this typically means that our peer
doesn't hear our Block-Acks or that we can't hear its
frames. Either way, it is a good indication that the link
is in a bad condition. This is why it can serve as a probe
to the driver.
Use the event_callback callback for this.
Since more events with the same data will be added in the
feature, the structure that describes the data attached to
the event is called in a generic name: ieee80211_ba_event.

This also means that from now on, the event_callback can't
sleep.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 12:25:00 +02:00
Chaya Rachel Ivgi
c1041f109a mac80211: fix ignored HT/VHT override configs
HT and VHT override configurations were ignored during association and
applied only when first beacon recived, or not applied at all.

Fix the code to apply HT/VHT overrides during association. This is a bit
tricky since the channel was already configured during authentication
and we don't want to reconfigure it unless there's really a change.

Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 12:23:35 +02:00
Johannes Berg
5a490510ba mac80211: use per-CPU TX/RX statistics
This isn't all that relevant for RX right now, but TX can be concurrent
due to multi-queue and the accounting is therefore broken.

Use the standard per-CPU statistics to avoid this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 11:16:11 +02:00
Johannes Berg
ce5b071a45 mac80211: don't update dev->trans_start
This isn't necessary any more as the stack will automatically
update the TXQ's trans_start after calling ndo_start_xmit().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 11:15:26 +02:00
Johannes Berg
6fe3eac793 mac80211: OCB: remove pointless check for broadcast BSSID
The OCB input path already checked that the BSSID is the broadcast
address, so the later check can never fail.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 11:14:14 +02:00
Johannes Berg
a58fbe1a85 mac80211: clean up/rename prepare_for_handlers()
The function really shouldn't be called prepare_for_handlers(),
all it does is check if the frame should be dropped. Rename it
to ieee80211_accept_frame() and clean it up a bit.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 11:14:14 +02:00
Johannes Berg
5c90067c0f mac80211: remove IEEE80211_RX_RA_MATCH
With promisc support gone, only AP and P2P-Device type interfaces
still clear IEEE80211_RX_RA_MATCH. In both cases this isn't really
necessary though, so we can remove that flag and the code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 11:14:13 +02:00
Johannes Berg
df1404650c mac80211: remove support for IFF_PROMISC
This support is essentially useless as typically networks are encrypted,
frames will be filtered by hardware, and rate scaling will be done with
the intended recipient in mind. For real monitoring of the network, the
monitor mode support should be used instead.

Removing it removes a lot of corner cases.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 11:14:13 +02:00
Johannes Berg
caf22d311a mac80211: enable hash table shrinking
The hashtable behaviour change was merged into the tree
at about the same time as the mac80211 use of rhashtable,
but of course these don't really conflict in the normal
sense. Enable hash table shrinking now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 11:11:57 +02:00
Johannes Berg
ebd82b39bf mac80211: make station hash table max_size configurable
Allow debug builds to configure the station hash table maximum
size in order to run with hash collisions in limited scenarios
such as hwsim testing. The default remains 0 which effectively
means no limit.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-23 17:26:06 +02:00
Johannes Berg
60f4b626d5 mac80211: fix rhashtable conversion
My conversion of the mac80211 station hash table to rhashtable
completely broke the lookup in sta_info_get() as it no longer
took into account the virtual interface. Fix that.

Fixes: 7bedd0cfad ("mac80211: use rhashtable for station table")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-23 16:40:40 +02:00
Herbert Xu
d8fe0ddd02 mac80211: Include crypto/aead.h
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
2015-04-23 14:18:11 +08:00
Johannes Berg
80616c0db8 mac80211: allow segmentation offloads
Implement the necessary software segmentation on the normal
TX path so that fast-xmit can use segmentation offload if
the hardware (or driver) supports it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-22 11:25:30 +02:00
Johannes Berg
680a0daba7 mac80211: allow drivers to support S/G
If drivers want to support S/G (really just gather DMA on TX) then
we can now easily support this on the fast-xmit path since it just
needs to write to the ethernet header (and already has a check for
that being possible.)

However, disallow this on the regular TX path (which has to handle
fragmentation, software crypto, etc.) by calling skb_linearize().

Also allow the related HIGHDMA since that's not interesting to the
code in mac80211 at all anyway.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-22 11:25:30 +02:00
Johannes Berg
2d981fddb0 mac80211: allow checksum offload only in fast-xmit
When we go through the complete TX processing, there are a number
of things like fragmentation and software crypto that require the
checksum to be calculated already.

In favour of maintainability, instead of adding the necessary call
to skb_checksum_help() in all the places that need it, just do it
once before the regular TX processing.

Right now this only affects the TI wlcore and QCA ath10k drivers
since they're the only ones using checksum offload. The previous
commits enabled fast-xmit for them in almost all cases.

For wlcore this even fixes a corner case: when a key fails to be
programmed to hardware software encryption gets used, encrypting
frames with a bad checksum.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-22 11:25:29 +02:00
Johannes Berg
3ffd884012 mac80211: extend fast-xmit to cover IBSS
IBSS can be supported very easily since it uses the standard station
authorization state etc. so it just needs to be covered by the header
building switch statement.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-22 10:07:38 +02:00
Johannes Berg
e495c24731 mac80211: extend fast-xmit for more ciphers
When crypto is offloaded then in some cases it's all handled
by the device, and in others only some space for the IV must
be reserved in the frame. Handle both of these cases in the
fast-xmit path, up to a limit of 18 bytes of space for IVs.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-22 10:07:37 +02:00
Johannes Berg
725b812c83 mac80211: extend fast-xmit to driver fragmentation
If the driver handles fragmentation then it wouldn't
be done in software so we can still use the fast-xmit
path in that case.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-22 10:07:36 +02:00
Johannes Berg
17c18bf880 mac80211: add TX fastpath
In order to speed up mac80211's TX path, add the "fast-xmit" cache
that will cache the data frame 802.11 header and other data to be
able to build the frame more quickly. This cache is rebuilt when
external triggers imply changes, but a lot of the checks done per
packet today are simplified away to the check for the cache.

There's also a more detailed description in the code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-22 10:02:25 +02:00
Johannes Berg
35c347ac53 mac80211: lock rate control
Both minstrel (reported by Sven Eckelmann) and the iwlwifi rate
control aren't properly taking concurrency into account. It's
likely that the same is true for other rate control algorithms.

In the case of minstrel this manifests itself in crashes when an
update and other data access are run concurrently, for example
when the stations change bandwidth or similar. In iwlwifi, this
can cause firmware crashes.

Since fixing all rate control algorithms will be very difficult,
just provide locking for invocations. This protects the internal
data structures the algorithms maintain.

I've manipulated hostapd to test this, by having it change its
advertised bandwidth roughly ever 150ms. At the same time, I'm
running a flood ping between the client and the AP, which causes
this race of update vs. get_rate/status to easily happen on the
client. With this change, the system survives this test.

Reported-by: Sven Eckelmann <sven@open-mesh.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-20 13:05:29 +02:00
Bob Copeland
48bf6beddf mac80211: introduce plink lock for plink fields
The mesh plink code uses sta->lock to serialize access to the
plink state fields between the peer link state machine and the
peer link timer.  Some paths (e.g. those involving
mps_qos_null_tx()) unfortunately hold this spinlock across
frame tx, which is soon to be disallowed.  Add a new spinlock
just for plink access.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-20 13:05:29 +02:00
Johannes Berg
5eb8f4d742 mac80211: don't warn when stopping VLAN with stations
Stations assigned to an AP_VLAN type interface are flushed
when the interface is stopped, but then we warn about it.
Suppress the warning since there's nothing else that would
ensure those stations are already removed at this point.

Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-20 13:04:39 +02:00
Linus Torvalds
6c373ca893 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Add BQL support to via-rhine, from Tino Reichardt.

 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers
    can support hw switch offloading.  From Floria Fainelli.

 3) Allow 'ip address' commands to initiate multicast group join/leave,
    from Madhu Challa.

 4) Many ipv4 FIB lookup optimizations from Alexander Duyck.

 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel
    Borkmann.

 6) Remove the ugly compat support in ARP for ugly layers like ax25,
    rose, etc.  And use this to clean up the neigh layer, then use it to
    implement MPLS support.  All from Eric Biederman.

 7) Support L3 forwarding offloading in switches, from Scott Feldman.

 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed
    up route lookups even further.  From Alexander Duyck.

 9) Many improvements and bug fixes to the rhashtable implementation,
    from Herbert Xu and Thomas Graf.  In particular, in the case where
    an rhashtable user bulk adds a large number of items into an empty
    table, we expand the table much more sanely.

10) Don't make the tcp_metrics hash table per-namespace, from Eric
    Biederman.

11) Extend EBPF to access SKB fields, from Alexei Starovoitov.

12) Split out new connection request sockets so that they can be
    established in the main hash table.  Much less false sharing since
    hash lookups go direct to the request sockets instead of having to
    go first to the listener then to the request socks hashed
    underneath.  From Eric Dumazet.

13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk.

14) Support stable privacy address generation for RFC7217 in IPV6.  From
    Hannes Frederic Sowa.

15) Hash network namespace into IP frag IDs, also from Hannes Frederic
    Sowa.

16) Convert PTP get/set methods to use 64-bit time, from Richard
    Cochran.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits)
  fm10k: Bump driver version to 0.15.2
  fm10k: corrected VF multicast update
  fm10k: mbx_update_max_size does not drop all oversized messages
  fm10k: reset head instead of calling update_max_size
  fm10k: renamed mbx_tx_dropped to mbx_tx_oversized
  fm10k: update xcast mode before synchronizing multicast addresses
  fm10k: start service timer on probe
  fm10k: fix function header comment
  fm10k: comment next_vf_mbx flow
  fm10k: don't handle mailbox events in iov_event path and always process mailbox
  fm10k: use separate workqueue for fm10k driver
  fm10k: Set PF queues to unlimited bandwidth during virtualization
  fm10k: expose tx_timeout_count as an ethtool stat
  fm10k: only increment tx_timeout_count in Tx hang path
  fm10k: remove extraneous "Reset interface" message
  fm10k: separate PF only stats so that VF does not display them
  fm10k: use hw->mac.max_queues for stats
  fm10k: only show actual queues, not the maximum in hardware
  fm10k: allow creation of VLAN on default vid
  fm10k: fix unused warnings
  ...
2015-04-15 09:00:47 -07:00
Linus Torvalds
eeee78cf77 Some clean ups and small fixes, but the biggest change is the addition
of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.
 
 Tracepoints have helper functions for the TP_printk() called
 __print_symbolic() and __print_flags() that lets a numeric number be
 displayed as a a human comprehensible text. What is placed in the
 TP_printk() is also shown in the tracepoint format file such that
 user space tools like perf and trace-cmd can parse the binary data
 and express the values too. Unfortunately, the way the TRACE_EVENT()
 macro works, anything placed in the TP_printk() will be shown pretty
 much exactly as is. The problem arises when enums are used. That's
 because unlike macros, enums will not be changed into their values
 by the C pre-processor. Thus, the enum string is exported to the
 format file, and this makes it useless for user space tools.
 
 The TRACE_DEFINE_ENUM() solves this by converting the enum strings
 in the TP_printk() format into their number, and that is what is
 shown to user space. For example, the tracepoint tlb_flush currently
 has this in its format file:
 
      __print_symbolic(REC->reason,
         { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
         { TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
         { TLB_LOCAL_SHOOTDOWN, "local shootdown" },
         { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })
 
 After adding:
 
      TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
      TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
      TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
      TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);
 
 Its format file will contain this:
 
      __print_symbolic(REC->reason,
         { 0, "flush on task switch" },
         { 1, "remote shootdown" },
         { 2, "local shootdown" },
         { 3, "local mm shootdown" })
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVLBTuAAoJEEjnJuOKh9ldjHMIALdRS755TXCZGOf0r7O2akOR
 wMPeum7C+ae1mH+jCsJKUC0/jUfQKaMt/UxoHlipDgcGg8kD2jtGnGCw4Xlwvdsr
 y4rFmcTRSl1mo0zDSsg6ujoupHlVYN0+JPjrd7S3cv/llJoY49zcanNLF7S2XLeM
 dZCtWRLWYpBiWO68ai6AqJTnE/eGFIqBI048qb5Eg8dbK243SSeSIf9Ywhb+VsA+
 aq6F7cWI/H6j4tbeza8tAN19dcwenDro5EfCDY8ARQHJu1f6Y3+DLf2imjkd6Aiu
 JVAoGIjHIpI+djwCZC1u4gi4urjfOqYartrM3Q54tb3YWYqHeNqP2ASI2a4EpYk=
 =Ixwt
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "Some clean ups and small fixes, but the biggest change is the addition
  of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.

  Tracepoints have helper functions for the TP_printk() called
  __print_symbolic() and __print_flags() that lets a numeric number be
  displayed as a a human comprehensible text.  What is placed in the
  TP_printk() is also shown in the tracepoint format file such that user
  space tools like perf and trace-cmd can parse the binary data and
  express the values too.  Unfortunately, the way the TRACE_EVENT()
  macro works, anything placed in the TP_printk() will be shown pretty
  much exactly as is.  The problem arises when enums are used.  That's
  because unlike macros, enums will not be changed into their values by
  the C pre-processor.  Thus, the enum string is exported to the format
  file, and this makes it useless for user space tools.

  The TRACE_DEFINE_ENUM() solves this by converting the enum strings in
  the TP_printk() format into their number, and that is what is shown to
  user space.  For example, the tracepoint tlb_flush currently has this
  in its format file:

     __print_symbolic(REC->reason,
        { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
        { TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
        { TLB_LOCAL_SHOOTDOWN, "local shootdown" },
        { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })

  After adding:

     TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
     TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
     TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
     TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);

  Its format file will contain this:

     __print_symbolic(REC->reason,
        { 0, "flush on task switch" },
        { 1, "remote shootdown" },
        { 2, "local shootdown" },
        { 3, "local mm shootdown" })"

* tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
  tracing: Add enum_map file to show enums that have been mapped
  writeback: Export enums used by tracepoint to user space
  v4l: Export enums used by tracepoints to user space
  SUNRPC: Export enums in tracepoints to user space
  mm: tracing: Export enums in tracepoints to user space
  irq/tracing: Export enums in tracepoints to user space
  f2fs: Export the enums in the tracepoints to userspace
  net/9p/tracing: Export enums in tracepoints to userspace
  x86/tlb/trace: Export enums in used by tlb_flush tracepoint
  tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM()
  tracing: Allow for modules to convert their enums to values
  tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values
  tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation
  tracing: Give system name a pointer
  brcmsmac: Move each system tracepoints to their own header
  iwlwifi: Move each system tracepoints to their own header
  mac80211: Move message tracepoints to their own header
  tracing: Add TRACE_SYSTEM_VAR to xhci-hcd
  tracing: Add TRACE_SYSTEM_VAR to kvm-s390
  tracing: Add TRACE_SYSTEM_VAR to intel-sst
  ...
2015-04-14 10:49:03 -07:00
David S. Miller
4e78eb0dbf There isn't much left, but we have
* new mac80211 internal software queue to allow drivers to have
    shorter hardware queues and pull on-demand
  * use rhashtable for mac80211 station table
  * minstrel rate control debug improvements and some refactoring
  * fix noisy message about TX power reduction
  * fix continuous message printing and activity if CRDA doesn't respond
  * fix VHT-related capabilities with "iw connect" or "iwconfig ..."
  * fix Kconfig for cfg80211 wireless extensions compatibility
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJVJ7CPAAoJEDBSmw7B7bqr8+IQAKCAbUyd6PFRT5tcz9kW5GCW
 /ibb+n1e14yWKgNEe1gddUGKG/L3HGCBXNkCYzR2M8mlL7dLPqspaBcGHS4dx8F4
 D0AuikqvtXIxfAXi0zmU2uo7rH7u2X34R2LtS8AlKByD+jmFvxMiPPvxNFgzJu/7
 63UQm73p2pnu/KdXLW1OQEcpZtZJ9+N/uBiq9zbVdX3A8T84ME0oMyy+EAQqCZdK
 CcsTXHCnAgmmXWJlu1JRdopr1bd38mSGB70eXduFtPqDdmtQRnoaCQ9e+tJDA4j4
 svEw0yDmsc4WG1EKLKKCRd3uFOZsng+lcXrHfpm5wlSPpCOItfQ9BzT3x1u6Y5JU
 Z1WMOMkkEce+95U7/RLoXwC/2RS3XelUXTde4cGIRMvO5drOrU58P0gdn3J+yKbv
 6v+2GGKy/39tdXUOxIl3EZT/huIl+h1UNO8C2hyaEwdXK+X1zl31/u6kk1Ns18Wr
 YPEJixxHx0zR8jaZgDC7OlWLuqn4Ay+Ls9yCyIesdHzKpizJKqn83PntYnpJmxoA
 9hlIyRDWnqH44KxzB85ni1C2Qudec3mcCWIWV7M+UoSC1Cgs/LxDzH7kRejR2ZIl
 vRhg5pqyr53L0h2lq5DO4Cj4UzbXb7YioKJRxjyKloNOlRrCZtK/VEsHbdsKEcIp
 d/wHj1AyFZeQfuhk8Qqr
 =mtuo
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2015-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
There isn't much left, but we have
 * new mac80211 internal software queue to allow drivers to have
   shorter hardware queues and pull on-demand
 * use rhashtable for mac80211 station table
 * minstrel rate control debug improvements and some refactoring
 * fix noisy message about TX power reduction
 * fix continuous message printing and activity if CRDA doesn't respond
 * fix VHT-related capabilities with "iw connect" or "iwconfig ..."
 * fix Kconfig for cfg80211 wireless extensions compatibility
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-12 20:43:46 -04:00
Steven Rostedt (Red Hat)
1bc1e4d048 mac80211: Move message tracepoints to their own header
Every tracing file must have its own TRACE_SYSTEM defined.
The mac80211 tracepoint header broke this and add in the middle
of the file had:

 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM mac80211_msg

Unfortunately, this broke new code in the ftrace infrastructure.
Moving the mac80211_msg into its own trace file with its own
TRACE_SYSTEM defined fixes the issue.

Link: http://lkml.kernel.org/r/1428389938.1841.1.camel@sipsolutions.net

Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-07 12:32:09 -04:00
Johannes Berg
29464ccc78 cfg80211: move IE split utilities here from mac80211
As the next patch will require the IE splitting utility functions
in cfg80211, move them there from mac80211.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-07 13:56:41 +02:00
David S. Miller
9f0d34bc34 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/usb/asix_common.c
	drivers/net/usb/sr9800.c
	drivers/net/usb/usbnet.c
	include/linux/usb/usbnet.h
	net/ipv4/tcp_ipv4.c
	net/ipv6/tcp_ipv6.c

The TCP conflicts were overlapping changes.  In 'net' we added a
READ_ONCE() to the socket cached RX route read, whilst in 'net-next'
Eric Dumazet touched the surrounding code dealing with how mini
sockets are handled.

With USB, it's a case of the same bug fix first going into net-next
and then I cherry picked it back into net.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02 16:16:53 -04:00
Felix Fietkau
ba8c3d6f16 mac80211: add an intermediate software queue implementation
This allows drivers to request per-vif and per-sta-tid queues from which
they can pull frames. This makes it easier to keep the hardware queues
short, and to improve fairness between clients and vifs.

The task of scheduling packet transmission is left up to the driver -
queueing is controlled by mac80211. Drivers can only dequeue packets by
calling ieee80211_tx_dequeue. This makes it possible to add active queue
management later without changing drivers using this code.

This can also be used as a starting point to implement A-MSDU
aggregation in a way that does not add artificially induced latency.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
[resolved minor context conflict, minor changes, endian annotations]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 20:44:34 +02:00
John Linville
cef2fc1ce4 mac80211: reduce log spam from ieee80211_handle_pwr_constr
This changes a couple of messages from sdata_info to sdata_dbg.
This should reduce some log spam, as reported here:

	https://bugzilla.redhat.com/show_bug.cgi?id=1206468

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 20:44:34 +02:00
Thomas Huehn
5f919abc76 mac80211: add standard deviation to Minstrel stats
This patch adds the statistical descriptor "standard deviation"
to better describe the current properties of Minstrel and
Minstrel-HTs success probability distribution. The standard
deviation (SD) is calculated as exponential weighted moving
standard deviation (EWMSD) and its current value is added as
new column in all rc_stats (in debugfs).

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 20:44:33 +02:00
Thomas Huehn
ade6d4a2ec mac80211: reduce calculation costs of EWMA
This patch reduces the calculation costs of the EWMA macro from
"2x multiplication and 1 addition" down to "1x multiplication and
2x additions". This slightly improves performance depending on the
CPU architecture.

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 20:44:33 +02:00
Thomas Huehn
50e55a8ea7 mac80211: add max lossless throughput per rate
This patch adds the new statistic "maximum possible lossless
throughput" to Minstrels and Minstrel-HTs rc_stats (in debugfs). This
enables comprehensive comparison between current per-rate throughput
and max. achievable per-rate throughput.

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 20:44:32 +02:00
Thomas Huehn
6a27b2c40b mac80211: restructure per-rate throughput calculation into function
This patch moves Minstrels and Minstrel-HTs per-rate throughput
calculation (EWMA(thr)) into a dedicated function to be called.
Therefore the variable "unsigned int cur_tp" within struct
"minstrel_rate_stats" becomes obsolete.  and is removed to free
up its space.

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 20:44:32 +02:00
Thomas Huehn
9134073bc6 mac80211: improve Minstrel variable & function naming
This patch ensures a consistent usage of variable names for type
"minstrel_rate_stats" to be used as "mrs" and from type minstrel_rate
as "mr" across both Minstrel & Minstrel-HT. In addition some
variable and function names got changed to more meaningful ones.

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 20:44:31 +02:00
Thomas Huehn
f62838bcc5 mac80211: unify Minstrel & Minstrel-HTs calculation of rate statistics
This patch unifies the calculation of Minstrels and Minstrel-HTs
per-rate statistic. The new common function minstrel_calc_rate_stats()
is called when a statistic update is performed.

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 20:44:31 +02:00
Thomas Huehn
2cae0b6a70 mac80211: add new Minstrel-HT statistic output via csv
This patch adds a new debugfs file "rc_stats_csv" to output
Minstrel-HTs statistics in a common csv format that is easy
to parse.

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: Stefan Venz <ikstream86@gmail.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
[remove printing current time of day]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 20:44:26 +02:00
Thomas Huehn
6d48851779 mac80211: add new Minstrel statistic output via csv
This patch adds a new debugfs file "rc_stats_csv" to output Minstrels
statistics in a common csv format that is easy to parse.

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: Stefan Venz <ikstream86@gmail.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
[remove printing current time of day]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 20:41:43 +02:00
Johannes Berg
788211d81b mac80211: fix RX A-MPDU session reorder timer deletion
There's an issue with the way the RX A-MPDU reorder timer is
deleted that can cause a kernel crash like this:

 * tid_rx is removed - call_rcu(ieee80211_free_tid_rx)
 * station is destroyed
 * reorder timer fires before ieee80211_free_tid_rx() runs,
   accessing the station, thus potentially crashing due to
   the use-after-free

The station deletion is protected by synchronize_net(), but
that isn't enough -- ieee80211_free_tid_rx() need not have
run when that returns (it deletes the timer.) We could use
rcu_barrier() instead of synchronize_net(), but that's much
more expensive.

Instead, to fix this, add a field tracking that the session
is being deleted. In this case, the only re-arming of the
timer happens with the reorder spinlock held, so make that
code not rearm it if the session is being deleted and also
delete the timer after setting that field. This ensures the
timer cannot fire after ___ieee80211_stop_rx_ba_session()
returns, which fixes the problem.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 14:35:01 +02:00
Thomas Huehn
9c00bb7210 mac80211: enhance readability of Minstrel-HTs rc_stats output
This patch restructures the rc_stats debugfs table of Minstrel-HT in
order to achieve better human readability. A new layout of the
statistics and a new header is added. In addition to the old layout
there are two new columns of information added:
idx	- representing the rate index of each rate in mac80211 which
	  can be used to set specific rates as fixed rate via debugfs
airtime	- the tx-time in micro seconds that a 1200 Byte packet
	  takes to be transmitted over the air at the given rate

The old layout of rc_stats:

type           rate      tpt eprob *prob ret  *ok(*cum)        ok(      cum)
HT20/LGI       MCS0      5.6 100.0 100.0   1    0(   0)         1(        1)
HT20/LGI   B   MCS1     10.5 100.0 100.0   0    0(   0)         1(        1)
HT20/LGI  A    MCS2     14.8 100.0 100.0   0    0(   0)         1(        1)
...

is changed into this new layout:

            best   ________rate______    __statistics__    ________last_______    ______sum-of________
mode guard #  rate  [name   idx airtime]  [ ø(tp) ø(prob)]  [prob.|retry|suc|att]  [#success | #attempts]
HT20  LGI  1         MCS0     0    1480      0.0      0.0      0.0   1     0 0             0   0
HT20  LGI  1     B   MCS1     1     740     10.5    100.0    100.0   0     0 0             1   1
HT20  LGI  1    A    MCS2     2     496     14.8    100.0    100.0   0     0 0             1   1
...

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: Stefan Venz <ikstream86@gmail.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 11:22:39 +02:00
Thomas Huehn
e161f7f6c4 mac80211: enhance readability of Minstrels rc_stats output
This patch restructures the rc_stats debugfs table of Minstrel in
order to achieve better human readability. A new layout of the
statistics and a new header is added. In addition to the old layout
there are two new columns of information added:
idx	- representing the rate index of each rate in mac80211 which
	  can be used to set specific rates as fixed rate via debugfs
airtime - the tx-time in micro seconds that a 1200 Byte packet
	  takes to be transmitted over the air at the given rate

The old layout of rc_stats:

    rate      tpt  eprob *prob ret  *ok(*cum)        ok(      cum)
 DP 1          0.9  93.5 100.0   1    0(   0)         2(        2)
    2          0.4  40.0 100.0   0    0(   0)         4(        10)
    5.5        0.0   0.0   0.0   0    0(   0)         0(        0)
...

is changed into this new layout:

best   _______rate_____    __statistics__    ________last_______    ______sum-of________
rate  [name idx tx-time]  [ ø(tp) ø(prob)]  [prob.|retry|suc|att]  [#success | #attempts]
 DP   1     0     9738      0.9    93.5     100.0   1     1 1             2   2
      2     1     4922      0.4    40.0     100.0   1     0 0             4   10
      5.5   2     1858      0.0     0.0       0.0   2     0 0             0   0
...

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: Stefan Venz <ikstream86@gmail.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 11:22:39 +02:00
Johannes Berg
7bedd0cfad mac80211: use rhashtable for station table
We currently have a hand-rolled table with 256 entries and are
using the last byte of the MAC address as the hash. This hash
is obviously very fast, but collisions are easily created and
we waste a lot of space in the common case of just connecting
as a client to an AP where we just have a single station. The
other common case of an AP is also suboptimal due to the size
of the hash table and the ease of causing collisions.

Convert all of this to use rhashtable with jhash, which gives
us the advantage of a far better hash function (with random
perturbation to avoid hash collision attacks) and of course
that the hash table grows and shrinks dynamically with chain
length, improving both cases above.

Use a specialised hash function (using jhash, but with fixed
length) to achieve better compiler optimisation as suggested
by Sergey Ryazanov.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 10:06:26 +02:00
David S. Miller
7b6249bba9 Lots of updates for net-next; along with the usual flurry
of small fixes, cleanups and internal features we have:
  * VHT support for TDLS and IBSS (conditional on drivers though)
  * first TX performance improvements (the biggest will come later)
  * many suspend/resume (race) fixes
  * name_assign_type support from Tom Gundersen
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJVGWlNAAoJEDBSmw7B7bqr5s8P/R9+Q6y4Ixice9dDOJYynl/d
 dMEUEfCBWUyDaQD1bNQIED2mc0sM5+Ax8OVIVx9fdrLGPxaISBqDJKE1USoTNZzm
 q+U3dM4Q45SfQSsgaY4FtxTlPWPtUKsNMXY/CxLR+IqVeA3+30rX+hv1f3SAqBj0
 68IwW/uUIHb71IZ+hz2Mwudt4JVW8KRg9VlZ0UY6EEvC4m5QD2YkwQQo/hJ2WF+/
 wAJbku02L/Vy4J7E6hNcKYWXokht4fVYphjl/1ZDd/+8L8SUv9mC88n1Jzxa428p
 1PmbtwzbpOrtTcC2BCPDA04IyfMc7k9DlLKw/h2KLPbHZXheD9eVmo/Am5vz+uH6
 926f+FK339SzoJnZ5wBBDiZ8W8TLYNc8ImxtcxjnrtGfr1CKiuh23P1CWyOlKJCO
 BYFJqkCOqWOHYnN0embaj7JqM/LmQI5ZoBZHZhD2KQXIXpTsjjIMPfJvip5D+tsV
 +iXIlQwdeK6rbjxdonBgn7n57XIeSVMAYeyDCbzIShfibjHbUZPn+RsZCtv8RWv8
 EaZu8PerU5ZDKwdX940+lWrtf/TMDJBYQpAIBRuiZK4DTNWCt3BrDlvb1FXGgA+X
 vQJnr32vjJ/pLDxNLHQlkKWC4I/CYtG47OgcJN9AQXrig1zApd+C29zy3aqch3ea
 wxV9dFfheTqZFjtZfSsH
 =O/cf
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2015-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Lots of updates for net-next; along with the usual flurry
of small fixes, cleanups and internal features we have:
 * VHT support for TDLS and IBSS (conditional on drivers though)
 * first TX performance improvements (the biggest will come later)
 * many suspend/resume (race) fixes
 * name_assign_type support from Tom Gundersen
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 16:39:04 -04:00
Johannes Berg
2c44be81f0 mac80211: set QoS capability before changing station state
In the upcoming fast-xmit patch, changing station state will
build a header cache based on the station's capabilities, and
as the QoS capability (sta.wme) impacts the header, it needs
to be set before.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 15:11:01 +02:00
Arik Nemtsov
070e176a75 mac80211: send HT/VHT IEs in TDLS discovery response
These are mandated by IEEE802.11-2012 section 8.5.8.6 and IEEE802.11ac-2013
section 8.5.8.16.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:48:59 +02:00
Janusz.Dziedzic@tieto.com
abcff6ef01 mac80211: add VHT support for IBSS
Add VHT support for IBSS. Drivers could activate
this feature by setting NL80211_EXT_FEATURE_VHT_IBSS
flag.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:48:26 +02:00
Janusz.Dziedzic@tieto.com
76bed0f43b mac80211: IBSS fix scan request
In case of wide bandwidth (wider than 20MHz) used by IBSS,
scan all channels in chandef to be able to find neighboring
IBSS netwqworks that use the same overall channels but a different
control channel.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:47:56 +02:00
Johannes Berg
97ffe75791 mac80211: factor out station lookup from ieee80211_build_hdr()
In order to look up the RA station earlier to implement a TX
fastpath, factor out the lookup from ieee80211_build_hdr().
To always have a valid station pointer, also move some of the
checks into the new function.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:47:19 +02:00
Johannes Berg
527871d720 mac80211: make sta.wme indicate whether QoS is used
Indicating just the peer's capability is fairly pointless
if the local device doesn't support it. Make the variable
track both combined, and remove the 'local support' check
in the TX path.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:47:16 +02:00
Johannes Berg
a73f8e21f3 mac80211: send AP probe as unicast again
Louis reported that a static checker was complaining that
the 'dst' variable was set (multiple times) but not used.
This is due to a previous commit having removed the usage
(apparently erroneously), so add it back.

Fixes: a344d6778a ("mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR")
Reported-by: Louis Langholtz <lou_langholtz@me.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:47:14 +02:00
Johannes Berg
07862e13e6 mac80111: aes_gcm: clean up ieee80211_aes_gcm_key_setup_encrypt()
This code is written using an anti-pattern called "success handling"
which makes it hard to read, especially if you are used to normal kernel
style.  It should instead be written as a list of directives in a row
with branches for error handling.

(Basically copied from Dan's previous patch for CCM)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:42:02 +02:00
Dan Carpenter
45fd63293a mac80111: aes_ccm: cleanup ieee80211_aes_key_setup_encrypt()
This code is written using an anti-pattern called "success handling"
which makes it hard to read, especially if you are used to normal kernel
style.  It should instead be written as a list of directives in a row
with branches for error handling.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:40:03 +02:00
Jouni Malinen
82ca6ef686 mac80211: Fix misplaced return in AES-GMAC key setup
Commit 8ade538bf3 ("mac80111: Add BIP-GMAC-128 and BIP-GMAC-256
ciphers") had the success return in incorrect place before the
crypto_aead_setauthsize() call which practically ended up skipping that
call unconditionally.

The missing call did not actually change any functionality since
GMAC_MIC_LEN (16) is identical to the maxauthsize in gcm(aes) and as
such, the default value used for the authsize parameter.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:38:07 +02:00
Tom Gundersen
6bab2e19c5 cfg80211: pass name_assign_type to rdev_add_virtual_intf()
This will expose in /sys whether the ifname of a device is set by
userspace or generated by the kernel. The latter kind (wlanX, etc)
is not deterministic, so userspace needs to rename these devices
to names that are guaranteed to stay the same between reboots. The
former, however should never be renamed, so userspace needs to be
able to reliably tell the difference.

Similar functionality was introduced for the rtnetlink core in
commit 5517750f05 ("net: rtnetlink - make create_link take name_assign_type")

Signed-off-by: Tom Gundersen <teg@jklm.no>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Cc: Hante Meuleman <meuleman@broadcom.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
[reformat changelog to fit 72 cols]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:36:17 +02:00
Michael Braun
6a8b4adb47 mac80211: fix typo in debug output
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:34:13 +02:00
Johannes Berg
8f9c77fc1e mac80211: reject aggregation sessions with non-HT peers
If a peer or some local agent (rate control, ...) decides to start
an aggregation session but doesn't support HT (which also implies
QoS), reject it.

This is mostly a corner case as such peers normally won't try to
use block-ack sessions and rate control wouldn't start them, but
technically QoS stations could request it according to the spec.

However, since drivers don't really support such non-HT sessions
it's better to reject them.

Also, while at it, move the tracing for TX sessions earlier so it
captures the error cases as well.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:33:19 +02:00
Arik Nemtsov
a38700dd48 cfg/mac80211: add regulatory classes IE during TDLS setup
Seems Broadcom TDLS peers (Nexus 5, Xperia Z3) refuse to allow TDLS
connection when channel-switching is supported but the regulatory
classes IE is missing from the setup request.
Add a chandef to reg-class translation function to cfg80211 and use it
to add the required IE during setup. For now add only the current
regulatory class as supported - it is enough to resolve the
compatibility issue.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:26:36 +02:00
David Spinadel
7d830a1986 mac80211: stop scan before connection
Stop scan before authentication or association to make sure
that nothing interferes with connection flow.

Currently mac80211 defers RX auth and assoc packets (among other ones)
until after the scan is complete, so auth during scan is likely to fail
if scan took too much time.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:19:13 +02:00
Emmanuel Grumbach
a90faa9d64 mac80211: notify the driver about deauth
This can allow the driver to take action based on the reason
of the deauth.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:17:12 +02:00
Emmanuel Grumbach
d0d1a12f9c mac80211: notify the driver about association status
This can allow the driver to take action based on the
success / failure of the association.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:17:11 +02:00
Emmanuel Grumbach
a9409093d2 mac80211: notify the driver about authentication status
This can allow the driver to take action based on the
success / failure of the authentication.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:17:10 +02:00
Emmanuel Grumbach
a818292952 mac80211: convert rssi_callback() to event_callback()
We will be able to add more events, such as MLME events and
others. The low level driver may be interested in knowing
about these events to dump firmware data upon failures, or
to change parameters in case connection attempts fail etc...

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:17:09 +02:00
Johannes Berg
2c158887f1 mac80211: agg-tx: avoid sending DelBA with sta->lock held
The rate control locking caused a potential deadlock here due to the
locks being acquired in different orders, so that change cannot yet
be applied. However, there's no fundamental reason for this code to
hold the sta->lock while transmitting frames.

Clearly it's better not to hold the lock for longer periods of time,
which can happen here since we call all the way down to the driver.
Change the code a bit to not hold it while doing that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 09:46:52 +02:00
David S. Miller
0fa74a4be4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/emulex/benet/be_main.c
	net/core/sysctl_net_core.c
	net/ipv4/inet_diag.c

The be_main.c conflict resolution was really tricky.  The conflict
hunks generated by GIT were very unhelpful, to say the least.  It
split functions in half and moved them around, when the real actual
conflict only existed solely inside of one function, that being
be_map_pci_bars().

So instead, to resolve this, I checked out be_main.c from the top
of net-next, then I applied the be_main.c changes from 'net' since
the last time I merged.  And this worked beautifully.

The inet_diag.c and sysctl_net_core.c conflicts were simple
overlapping changes, and were easily to resolve.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20 18:51:09 -04:00
Johannes Berg
7c10770f99 mac80211: avoid duplicate TX path station lookup
Instead of looking up the destination station twice in the TX path
(first to build the header, and then for control processing), save
it when building the header and use it later in the TX path.

To avoid having to look up the station in the many callers, allow
those to pass %NULL which keeps the existing lookup.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20 16:27:36 +01:00
Johannes Berg
e33f5569aa mac80211: mesh: avoid pointless station lookup
In ieee80211_build_hdr(), the station is looked up to build the
header correctly (QoS field) and to check for authorization. For
mesh, authorization isn't checked here, and QoS capability is
mandatory, so the station lookup can be avoided.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20 16:27:36 +01:00
Johannes Berg
a8d15ff005 mac80211: drop 4-addr VLAN frames earlier if not connected
If there's no station on the 4-addr VLAN interface, then frames
cannot be transmitted. Drop such frames earlier, before setting
up all the information for them.

We should keep the old check though since that code might be used
for other internally-generated frames.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20 16:27:35 +01:00
Johannes Berg
5041006c42 mac80211: don't look up destination station twice
There's no need to look up the destination station twice while
building the 802.11 header for a given frame if the frame will
actually be transmitted to the station we initially looked up.

This happens for 4-addr VLAN interfaces and TDLS connections, which
both directly send the frame to the station they looked up, though
in the case of TDLS some station conditions need to be checked.

To avoid that, add a variable indicating that we've looked up the
station that the frame is going to be transmitted to, and avoid the
lookup/flag checking if it already has been done.

In the TDLS case, also move the authorized/wme_sta flag assignment
to the correct place, i.e. only when that station is really used.
Before this change, the new lookup should always have succeeded so
that the potentially erroneous data would be overwritten.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20 16:27:34 +01:00
Johannes Berg
e8f4fb7c7c mac80211: remove drop_unencrypted code
This mechanism was historic, and only ever used by IBSS, which
also doesn't need to have it as it properly manages station's
802.1X PAE state (or, with WEP, always has a key.)

Remove the mechanism to clean up the code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20 11:37:36 +01:00
Cedric Izoard
c7ef38e0cc mac80211: Get IV len from key conf and not cipher scheme
When a key is installed using a cipher scheme, set a new
internal key flag (KEY_FLAG_CIPHER_SCHEME) on it, to allow
distinguishing such keys more easily.

In particular, use this flag on the TX path instead of
testing the sta->cipher_scheme pointer, as the station is
NULL for broad-/multicast message, and use the key's iv_len
instead of the cipher scheme information.

Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
[add missing documentation, rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-17 12:34:26 +01:00
Janusz.Dziedzic@tieto.com
8a4988d137 mac80211: IBSS: refactor ieee80211_rx_bss_info
Put station specific code in ieee80211_update_sta_info
function.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-17 11:06:53 +01:00
Felix Fietkau
d66c258278 mac80211: minstrel_ht: fix rounding issue in MCS duration calculation
On very high MCS bitrates, the calculated duration of rates that are
next to each other can be very imprecise, due to the small packet size
used as reference (1200 bytes).
This is most visible in VHT80 nss=2 MCS8/9, for which minstrel shows the
same throughput when the probability is also the same. This leads to a
bad rate selection for such rates.

Fix this issue by introducing an average A-MPDU size factor into the
calculation.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-17 11:03:30 +01:00
Marek Puzyniak
c23e31cf7b mac80211: initialize rate control earlier for tdls station
Currently when TDLS station in driver goes from authenticated
to associated state it can not use rate control parameters
because rate control is not initialized yet. Some drivers
require parameters already initialized by rate control when
entering associated state. It can be done by initializing
rate control after station transition to associated state but
before notifying driver about that.

Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com>
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
[fix comment to say 'associated' instead of 'authorized']
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-17 11:00:07 +01:00
Johannes Berg
f84eaa1068 mac80211: ignore CSA to same channel
If the AP is confused and starts doing a CSA to the same channel,
just ignore that request instead of trying to act it out since it
was likely sent in error anyway.

In the case of the bug I was investigating the GO was misbehaving
and sending out a beacon with CSA IEs still included after having
actually done the channel switch.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:36:12 +01:00
Johannes Berg
70a3fd6c61 mac80211: ask for ECSA IE to be considered for beacon parse CRC
When a beacon from the AP contains only the ECSA IE, and not a CSA IE
as well, this ECSA IE is not considered for calculating the CRC and
the beacon might be dropped as not being interesting. This is clearly
wrong, it should be handled and the channel switch should be executed.

Fix this by including the ECSA IE ID in the bitmap of interesting IEs.

Reported-by: Gil Tribush <gil.tribush@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:36:11 +01:00
Andrei Otcheretianski
0f611d28fc mac80211: count interfaces correctly for combination checks
Since moving the interface combination checks to mac80211, it's
broken because it now only considers interfaces with an assigned
channel context, so for example any interface that isn't active
can still be up, which is clearly an issue; also, in particular
P2P-Device wdevs are an issue since they never have a chanctx.

Fix this by counting running interfaces instead the ones with a
channel context assigned.

Cc: stable@vger.kernel.org [3.16+]
Fixes: 73de86a389 ("cfg80211/mac80211: move interface counting for combination check to mac80211")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[rewrite commit message, dig out the commit it fixes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:35:59 +01:00
Johannes Berg
f3b0bbb35d mac80211: refactor drop connection/unlock in CSA processing
The schedule_work()/mutex unlocking code is duplicated many times,
refactor that to a common place in the function.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:31:02 +01:00
Emmanuel Grumbach
dc5a1ad7bd mac80211: allow to get wireless_dev structure from ieee80211_vif
This will allow mac80211 drivers to call cfg80211 APIs with
the right handle.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:30:30 +01:00
Johannes Berg
45ceeee81e mac80211: add comment for rx_path_lock
Add a comment explaining how the RX path lock is used.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:08:20 +01:00
Johannes Berg
4cc0dba95a mac80211: move netdev stats to common function
Move the netdev stats accounting into the common function
ieee80211_deliver_skb() that is called in both places.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:05:27 +01:00
Nicholas Mc Guire
0df2f6c118 mesh_plink: fixup type of timeout to match usage
timeout was being passed as int but assigned from u32/u16 values and used
as unsigned type. This is really only for better readability.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 10:34:14 +01:00
Nicholas Mc Guire
cc57ac536a mesh_plink: use msecs_to_jiffies for proper time conversion
This is primarily an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var) which also handles
corner cases correctly.

There is a change of behavior as e.g. for HZ 100, t * HZ / 1000 will
return 0 for t < 10 but msecs_to_jiffies will return at least 1 always.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 10:34:13 +01:00
SenthilKumar Jegadeesan
64a8cef41a mac80211: provide station PMF configuration to driver
Some device drivers offload part of aggregation including AddBA/DelBA
negotiations to firmware. In such scenario, the PMF configuration of
the station needs to be provided to driver to enable encryption of
AddBA/DelBA action frames.

Signed-off-by: SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com>
[fix commit log, documentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 10:34:12 +01:00
Arik Nemtsov
3384d757d4 mac80211: allow iterating inactive interfaces
Sometimes the driver might want to modify private data in interfaces
that are down. One possible use-case is cleaning up interface state
after HW recovery. Some interfaces that were up before the recovery took
place might be down now, but they might still be "dirty".

Introduce a new iterate_interfaces() API and a new ACTIVE iterator flag.
This way the internal implementation of the both active and inactive
APIs remains the same.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 10:34:12 +01:00
Johannes Berg
88724a81b4 mac80211: check and dequeue skb in ieee80211_tx_prepare_skb()
The ieee80211_tx_prepare_skb() function currently entirely ignores
the fact that the SKB that is passed in might be split into more
than one due to fragmentation and doesn't check the list of skbs
that the TX handlers may create. In case this happens, it would
leak them.

Fix this and also don't leave the skb next/prev pointers dangling
pointing to the on-stack sk_buff_head.

Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 10:34:11 +01:00
Luciano Coelho
0b4e11074a mac80211: remove duplicate check for quiescing when queueing work
In ieee80211_queue_work() we check if we're quiescing or suspended, so
it's not necessary to check for quiescing before calling this
function.  Remove duplicate checks.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 10:34:10 +01:00
Arik Nemtsov
ae2e9fba85 mac80211: allow TDLS setup code to take wdev lock
TDLS off-channel can be allowed in channels marked with GO_CONCURRENT,
provided the device is connected to an AP on the same UNII.
When relaxing the NO-IR requirements for TDLS, we might hit flows in
cfg80211_reg_can_beacon that acquire the wdev lock. Take some measures
to allow this during TDLS setup.
Acquire the RCU read lock later in the flow that invokes
cfg80211_reg_can_beacon.
Avoid taking local->mtx when preparing the setup packet to avoid
circular deadlocks with mac80211 code that is invoked with wdev-mtx
held.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 10:34:10 +01:00
Johannes Berg
23e370989c mac80211: start queues if driver rejected wowlan
If the driver rejects WoWLAN, restart the queues before returning
to cfg80211. cfg80211 will return to mac80211, but not before it
disconnects all interfaces. If we don't start the queues, any of
the packets needed for disconnecting won't be transmitted, which
is strange. Fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 10:34:09 +01:00
Luciano Coelho
8bb6f4b9c5 mac80211: remove useless double check for open_count in __ieee80211_suspend()
We check local->open_count at the top of the __ieee80211_suspend(), so
there's no need to check for it again.  open_count is protected by the
rtnl, so there's no chance for it to have change between the two
calls.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 10:34:09 +01:00
Johannes Berg
ef7c67257c mac80211: don't do driver suspend with auth/assoc in progress
Drivers can't really be expected to suspend properly while auth
or assoc is in progress since then they don't have any state
they could keep with WoWLAN, nor can they actually finish the
authentication or association. In fact, keeping this can cause
subtle issues with drivers like iwlwifi that refuse WoWLAN if
not associated, but have trouble figuring out what's going on
in the middle of association.

In any case, regardless of possible driver issues in this area,
it doesn't make sense for mac80211 to try to WoWLAN-suspend in
the middle of such operations, so stop them before.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04 10:34:08 +01:00
David S. Miller
71a83a6db6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/rocker/rocker.c

The rocker commit was two overlapping changes, one to rename
the ->vport member to ->pport, and another making the bitmask
expression use '1ULL' instead of plain '1'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03 21:16:48 -05:00
Joe Perches
c84a67a2fc mac80211: Use eth_<foo>_addr instead of memset
Use the built-in function instead of memset.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03 17:01:38 -05:00
Luciano Coelho
c8fff3dc72 mac80211: handle drv_add_interface failures properly during reconfig
If any interface fails to be added to the driver in during reconfig,
we should remove all the successfully added interfaces and report
reconfig failure, so things can be cleaned up properly.  Failing to do
so can lead to subsequent failures and leave the drivers in a messed
up state.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03 15:56:09 +01:00
Johannes Berg
be72afe0a4 mac80211: fix another suspend vs. association race
Since cfg80211 disconnects, but has no insight into the association
process, it can happen that it disconnects while association is in
progress. We then try to abort association in mac80211, but this is
only later so the association can complete between the two.

This results in removing an interface from the driver while bound
to the channel context, obviously causing confusion and issues.

Solve this by also checking if we're associated during quiesce and
if so deauthenticating. The frame will no longer go out to the AP
which is a bit unfortunate, but it'll resolve the crash (and before
we would have suspended without telling the AP as well.)

I'm working on a better, but more complex solution as well, which
should avoid that problem.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03 15:56:08 +01:00
Arik Nemtsov
fb28ec0ce4 mac80211: TDLS: support VHT between peers
Add the AID and VHT-cap/operation IEs during TDLS setup. Remove the
block of TDLS peers when setting HT-caps of the peer station.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03 15:56:07 +01:00