Commit Graph

60 Commits

Author SHA1 Message Date
Linus Torvalds
7f73ba68cf Thermal control updates for 6.8-rc1
- Add dynamic thresholds for trip point crossing detection to prevent
    trip point crossing notifications from being sent at incorrect times
    or not at all in some cases (Rafael J. Wysocki).
 
  - Fix synchronization issues related to the resume of thermal zones
    during a system-wide resume and allow thermal zones to be resumed
    concurrently (Rafael J. Wysocki).
 
  - Modify the thermal zone unregistration to wait for the given zone to
    go away completely before returning to the caller and rework the
    sysfs interface for trip points on top of that (Rafael J. Wysocki).
 
  - Fix a possible NULL pointer dereference in thermal zone registration
    error path (Rafael J. Wysocki).
 
  - Clean up the IPA thermal governor and modify it (with the help of a
    new governor callback) to avoid allocating and freeing memory every
    time its throttling callback is invoked (Lukasz Luba).
 
  - Make the IPA thermal governor handle thermal instance weight changes
    via sysfs correctly (Lukasz Luba).
 
  - Update the thermal netlink code to avoid sending messages if there
    are no recipients (Stanislaw Gruszka).
 
  - Convert Mediatek Thermal to the json-schema (Rafał Miłecki).
 
  - Fix thermal DT bindings issue on Loongson (Binbin Zhou).
 
  - Fix returning NULL instead of -ENODEV during thermal probe on
    Loogsoon (Binbin Zhou).
 
  - Add thermal DT binding for tsens on the SM8650 platform (Neil
    Armstrong).
 
  - Add reboot on the critical trip point crossing option feature (Fabio
    Estevam).
 
  - Use DEFINE_SIMPLE_DEV_PM_OPS do define PM functions for thermal
    suspend/resume on AmLogic (Uwe Kleine-König)
 
  - Add D1/T113s THS controller support to the Sun8i thermal control
    driver (Maxim Kiselev)
 
  - Fix example in the thermal DT binding for QCom SPMI (Johan Hovold).
 
  - Fix compilation warning in the tmon utility (Florian Eckert).
 
  - Add support for interrupt-based thermal configuration on Exynos along
    with a set of related cleanups (Mateusz Majewski).
 
  - Make the Intel HFI thermal driver enable an HFI instance (eg. processor
    package) from its first online CPU and disable it when the last CPU in
    it goes offline (Ricardo Neri).
 
  - Fix a kernel-doc warning and a spello in the cpuidle_cooling thermal
    driver (Randy Dunlap).
 
  - Move the .get_temp() thermal zone callback presence check to the
    thermal zone registration code (Daniel Lezcano).
 
  - Use the for_each_trip() macro for trip points table walks in a few
    places in the thermal core (Rafael J. Wysocki).
 
  - Make all trip point updates (via sysfs as well as from the platform
    firmware) trigger trip change notifications (Rafael J. Wysocki).
 
  - Drop redundant code from the thermal core and make one function in
    it take a const pointer argument (Rafael J. Wysocki).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmWb8iUSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxKLkP/iDsuDwmhZAjbAu2iftk/8ad8Trm2VoK
 +9eZ5Eqa8lKEcJLb0RxueTnFT4ppvT/hY99HOG4FM+mCnWeH/Z32N697DhqiUg4v
 GZUpeOPzxYgsfOOTeuL5XgfrVMgBjJrJunTXmzgAd8lIhTmRbAMVmFVJ18CJO11O
 RHgqvYznYFi5cywA9/NkG2xkhFB0VDoiTuIiuMMV+pMjqF0d5ooBMkhmjvPQ5Rp9
 FjNJ7hqiTamAsDPdULAFqhIGGhKZWWFbh4+S+JPCwBW8nqvxyJpemsm20vrwctJR
 bSXWQkgkDpWEeg9yrEAOO/Uk9yGd3jiLfkvPBKbK0x/YxGZ4hOYHcbF3cOUvmPYP
 5K3ZJ61DNrzB/5S3LY54VYrWmTVRdK6Lk3HYNvfAUYFJZMZ5oMYZLCUmo4SswUdy
 UUEIY27H7L18eLhP9zCcKo4njdaVG+vXQn/rJIFOpG0k9OElzPs1X8Dp/m9pKQDR
 rDUsMXqB34NUVrIEhjAgqvwF5xHooW8gykpuJgxwBetA9w8Pls2A/mzLsDY3wgdQ
 htiANGpKTDqBQSn+HrjzYckv9/R+1tDyTJmEDNZwllA1DJfrOlpCRD2VHRpgTZEA
 Ldnq0bhyq6RQnousqxhgpYkIAoGaebs9XasRH0YtBG5gIumeWfqeVzmTcM5xdsNB
 yf6RdQy8QunS
 =QVyh
 -----END PGP SIGNATURE-----

Merge tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
 "These add support for the D1/T113s THS controller to the sun8i driver
  and a DT-based mechanism for platforms to indicate a preference to
  reboot (instead of shutting down) on crossing a critical trip point,
  fix issues, make other improvements (in the IPA governor, the Intel
  HFI driver, the exynos driver and the thermal netlink interface among
  other places) and clean up code.

  One long-standing issue addressed here is that trip point crossing
  notifications sent to user space might be unreliable due to the
  incorrect handling of trip point hysteresis in the thermal core:
  multiple notifications might be sent for the same event or there might
  be events without any notification at all.

  Specifics:

   - Add dynamic thresholds for trip point crossing detection to prevent
     trip point crossing notifications from being sent at incorrect
     times or not at all in some cases (Rafael J. Wysocki)

   - Fix synchronization issues related to the resume of thermal zones
     during a system-wide resume and allow thermal zones to be resumed
     concurrently (Rafael J. Wysocki)

   - Modify the thermal zone unregistration to wait for the given zone
     to go away completely before returning to the caller and rework the
     sysfs interface for trip points on top of that (Rafael J. Wysocki)

   - Fix a possible NULL pointer dereference in thermal zone
     registration error path (Rafael J. Wysocki)

   - Clean up the IPA thermal governor and modify it (with the help of a
     new governor callback) to avoid allocating and freeing memory every
     time its throttling callback is invoked (Lukasz Luba)

   - Make the IPA thermal governor handle thermal instance weight
     changes via sysfs correctly (Lukasz Luba)

   - Update the thermal netlink code to avoid sending messages if there
     are no recipients (Stanislaw Gruszka)

   - Convert Mediatek Thermal to the json-schema (Rafał Miłecki)

   - Fix thermal DT bindings issue on Loongson (Binbin Zhou)

   - Fix returning NULL instead of -ENODEV during thermal probe on
     Loogsoon (Binbin Zhou)

   - Add thermal DT binding for tsens on the SM8650 platform (Neil
     Armstrong)

   - Add reboot on the critical trip point crossing option feature
     (Fabio Estevam)

   - Use DEFINE_SIMPLE_DEV_PM_OPS do define PM functions for thermal
     suspend/resume on AmLogic (Uwe Kleine-König)

   - Add D1/T113s THS controller support to the Sun8i thermal control
     driver (Maxim Kiselev)

   - Fix example in the thermal DT binding for QCom SPMI (Johan Hovold)

   - Fix compilation warning in the tmon utility (Florian Eckert)

   - Add support for interrupt-based thermal configuration on Exynos
     along with a set of related cleanups (Mateusz Majewski)

   - Make the Intel HFI thermal driver enable an HFI instance (eg.
     processor package) from its first online CPU and disable it when
     the last CPU in it goes offline (Ricardo Neri)

   - Fix a kernel-doc warning and a spello in the cpuidle_cooling
     thermal driver (Randy Dunlap)

   - Move the .get_temp() thermal zone callback presence check to the
     thermal zone registration code (Daniel Lezcano)

   - Use the for_each_trip() macro for trip points table walks in a few
     places in the thermal core (Rafael J. Wysocki)

   - Make all trip point updates (via sysfs as well as from the platform
     firmware) trigger trip change notifications (Rafael J. Wysocki)

   - Drop redundant code from the thermal core and make one function in
     it take a const pointer argument (Rafael J. Wysocki)"

* tag 'thermal-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
  thermal: trip: Constify thermal zone argument of thermal_zone_trip_id()
  thermal: intel: hfi: Disable an HFI instance when all its CPUs go offline
  thermal: intel: hfi: Enable an HFI instance from its first online CPU
  thermal: intel: hfi: Refactor enabling code into helper functions
  thermal/drivers/exynos: Use set_trips ops
  thermal/drivers/exynos: Use BIT wherever possible
  thermal/drivers/exynos: Split initialization of TMU and the thermal zone
  thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210
  thermal/drivers/exynos: Simplify regulator (de)initialization
  thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly
  thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts
  thermal/drivers/exynos: Drop id field
  thermal/drivers/exynos: Remove an unnecessary field description
  tools/thermal/tmon: Fix compilation warning for wrong format
  dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
  dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
  thermal/drivers/sun8i: Add D1/T113s THS controller support
  dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
  thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
  thermal: amlogic: Make amlogic_thermal_disable() return void
  ...
2024-01-09 16:20:17 -08:00
Fabio Estevam
79fa723ba8 reboot: Introduce thermal_zone_device_critical_reboot()
Introduce thermal_zone_device_critical_reboot() to trigger an
emergency reboot.

It is a counterpart of thermal_zone_device_critical() with the
difference that it will force a reboot instead of shutdown.

The motivation for doing this is to allow the thermal subystem
to trigger a reboot when the temperature reaches the critical
temperature.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231129124330.519423-3-festevam@gmail.com
2024-01-02 09:33:18 +01:00
Fabio Estevam
5a0e241003 thermal/core: Prepare for introduction of thermal reboot
Add some helper functions to make it easier introducing the support
for thermal reboot.

No functional change.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231129124330.519423-2-festevam@gmail.com
2024-01-02 09:33:18 +01:00
Dongmin Lee
a9a1d6ad66 kernel/reboot: explicitly notify if halt occurred instead of power off
When kernel_can_power_off() returns false, and reboot has called with
LINUX_REBOOT_CMD_POWER_OFF, kernel_halt() will be initiated instead of
actual power off function.

However, in this situation, Kernel never explicitly notifies user that
system halted instead of requested power off.

Since halt and power off perform different behavior, and user initiated
reboot call with power off command, not halt, This could be unintended
behavior to user, like this:

~ # poweroff -f
[    3.581482] reboot: System halted

Therefore, this explicitly notifies user that poweroff is not available,
and halting has been occured as an alternative behavior instead:

~ # poweroff -f
[    4.123668] reboot: Power off not available: System halted instead

[akpm@linux-foundation.org: tweak comment text]
Link: https://lkml.kernel.org/r/20231104113320.72440-1-ldmldm05@gmail.com
Signed-off-by: Dongmin Lee <ldmldm05@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-10 17:21:25 -08:00
Benjamin Bara
db2d6038c5 kernel/reboot: Add device to sys_off_handler
If the dev is known (e.g. a devm-based sys_off_handler is used), it can
be passed to the handler's callback to have it available there.
Otherwise, cb_data might be set to the dev in most of the cases.

Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230327-tegra-pmic-reboot-v7-3-18699d5dcd76@skidata.com
Signed-off-by: Lee Jones <lee@kernel.org>
2023-07-28 11:33:09 +01:00
Benjamin Bara
60466c0679 kernel/reboot: emergency_restart: Set correct system_state
As the emergency restart does not call kernel_restart_prepare(), the
system_state stays in SYSTEM_RUNNING.

Since bae1d3a05a, this hinders i2c_in_atomic_xfer_mode() from becoming
active, and therefore might lead to avoidable warnings in the restart
handlers, e.g.:

[   12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0
[   12.676926] Voluntary context switch within RCU read-side critical section!
...
[   12.742376]  schedule_timeout from wait_for_completion_timeout+0x90/0x114
[   12.749179]  wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70
...
[   12.994527]  atomic_notifier_call_chain from machine_restart+0x34/0x58
[   13.001050]  machine_restart from panic+0x2a8/0x32c

Avoid these by setting the correct system_state.

Fixes: bae1d3a05a ("i2c: core: remove use of in_atomic()")
Cc: stable@vger.kernel.org # v5.2+
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230327-tegra-pmic-reboot-v7-1-18699d5dcd76@skidata.com
Signed-off-by: Lee Jones <lee@kernel.org>
2023-07-28 11:32:46 +01:00
Kai-Heng Feng
e7fd8b6840 kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
Add SYS_OFF_MODE_RESTART_PREPARE callbacks to be invoked before
a system restart.

Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-04 15:59:36 +02:00
Petr Mladek
51889d225c Merge branch 'rework/kthreads' into for-linus 2022-06-23 19:11:28 +02:00
Petr Mladek
07a22b6194 Revert "printk: add functions to prefer direct printing"
This reverts commit 2bb2b7b57f.

The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.

It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.

printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.

Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-7-pmladek@suse.com
2022-06-23 18:41:40 +02:00
Petr Mladek
20fb0c8272 Revert "printk: Wait for the global console lock when the system is going down"
This reverts commit b87f02307d.

The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.

It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.

printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.

Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-2-pmladek@suse.com
2022-06-23 18:41:40 +02:00
Linus Torvalds
93d17c1c8c printk fixes for 5.19-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmKsk94ACgkQUqAMR0iA
 lPKp9w/7BCovpkGiiQT1ZDSq2UVOgwpkQB8fcbGgd+7YfEVU/ILR4mRjEMfgb4CS
 66T9Mgt738X6U9rmUGLRmnS21sMITRLTebBOFXAKphtT8kGyrs0JDC+8YnTTznel
 892wUT4G149H2s7op3hEjnCJfxYTH0gtmRrFN30QTKXnEyCQ0AbSsVhT4uczVvgj
 YNur93CyR/Bh1/BtyKwe5CbDpoAPrDyGZbY2cWMWW14Enley2/8BUezlXhP8ybeU
 n4eQpaIu+05hzI54f3B1PelY1Ky/d2KwAXxQpQe2NU1OvXui6xlTas1aNQyBtMmF
 pBKCiXR+M3kT/LXambZxoAEbGEmIE01Z1ZwSuOJw54p/P8DDwOQj+HGgYCMGtTBs
 P3zeQ12+ir1wjz7OVAOpj53Zhb0g7g9DfmRaw1V5CSeMcptJhTcH5Jzn3uHqr0hy
 3y6rculrODINzWldiiEVfPKzHrHpcU6H5fHDpjXyUAZ16mKxW6WSGklC+ckoOmRS
 pklCvJpJG/ZbzsXqSTgNOmDSLGZcB3OklJxZqzoX/nbmYl3EAXA4qmELIgaq6Et7
 g8opDAAqXrmiLtI79KDTlEWRgkQh5h9Mkave8sm73NKwovoh58jNC0sxFyFDN442
 Hq33nca4HHf91Orl8XmaHkK7/LmgT8T4BDekMN1b0buq2YSr2bg=
 =iiXX
 -----END PGP SIGNATURE-----

Merge tag 'printk-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

Pull printk fixes from Petr Mladek:
 "Make the global console_sem available for CPU that is handling panic()
  or shutdown.

  This is an old problem when an existing console lock owner might block
  console output, but it became more visible with the kthreads"

* tag 'printk-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: Wait for the global console lock when the system is going down
  printk: Block console kthreads when direct printing will be required
2022-06-17 14:57:42 -05:00
Petr Mladek
38335cc5ff Merge branch 'rework/kthreads' into for-linus 2022-06-17 16:36:48 +02:00
Petr Mladek
b87f02307d printk: Wait for the global console lock when the system is going down
There are reports that the console kthreads block the global console
lock when the system is going down, for example, reboot, panic.

First part of the solution was to block kthreads in these problematic
system states so they stopped handling newly added messages.

Second part of the solution is to wait when for the kthreads when
they are actively printing. It solves the problem when a message
was printed before the system entered the problematic state and
the kthreads managed to step in.

A busy waiting has to be used because panic() can be called in any
context and in an unknown state of the scheduler.

There must be a timeout because the kthread might get stuck or sleeping
and never release the lock. The timeout 10s is an arbitrary value
inspired by the softlockup timeout.

Link: https://lore.kernel.org/r/20220610205038.GA3050413@paulmck-ThinkPad-P17-Gen-1
Link: https://lore.kernel.org/r/CAMdYzYpF4FNTBPZsEFeWRuEwSies36QM_As8osPWZSr2q-viEA@mail.gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220615162805.27962-3-pmladek@suse.com
2022-06-15 22:04:15 +02:00
Dmitry Osipenko
2b8c612c61 kernel/reboot: Fix powering off using a non-syscall code paths
There are other methods of powering off machine than the reboot syscall.
Previously we missed to cover those methods and it created power-off
regression for some machines, like the PowerPC e500.

Fix this problem by moving the legacy sys-off handler registration to
the latest phase of power-off process and making the kernel_can_power_off()
check the legacy pm_power_off presence.

Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppce500
Reported-by: Michael Ellerman <mpe@ellerman.id.au> # ppce500
Fixes: da007f171f ("kernel/reboot: Change registration order of legacy power-off handler")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-06-07 19:42:31 +02:00
Dmitry Osipenko
587b9bfe06 kernel/reboot: Use static handler for register_platform_power_off()
The register_platform_power_off() fails on m68k platform due to the
memory allocation error that happens at a very early boot time when
memory allocator isn't available yet. Fix it by using a static sys-off
handler for the platform-level power-off handlers.

Fixes: f0f7e5265b ("m68k: Switch to new sys-off handler API")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-06-02 20:36:13 +02:00
Linus Torvalds
1ff7bc3ba7 More power management updates for 5.19-rc1
- Add Tegra234 cpufreq support (Sumit Gupta).
 
  - Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
    Rex-BC Chen, and Jia-Wei Chang).
 
  - Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
    Pierre Gondois).
 
  - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
    Oudjana).
 
  - Use list iterator only inside the list_for_each_entry loop (Xiaomeng
    Tong, and Jakob Koschel).
 
  - New APIs related to finding OPP based on interconnect bandwidth
    (Krzysztof Kozlowski).
 
  - Fix the missing of_node_put() in _bandwidth_supported() (Dan
    Carpenter).
 
  - Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
 
  - Add Out of Band mode description to the intel-speed-select utility
    documentation (Srinivas Pandruvada).
 
  - Add power sequences support to the system reboot and power off
    code and make related platform-specific changes for multiple
    platforms (Dmitry Osipenko, Geert Uytterhoeven).
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmKU8lESHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxVz0P91LNCbkDSt60jzNkXdEjsvUnI/YjJ+QJ
 /+ta7iCwf90obb6s9soBkTyU8Ia7hJ/IWDJW/5xhdG0ySYF17hGNIGKK9xKGsJFK
 tzzWtjFsvT3PeUZQERekqWp8OYskHYmQMj8o4jqqFF7DZD/AswTgkVLALUd7YhVL
 UvLmcKsUA7eXy3ZrhtrGSzVSEbKOGXBLFyjy3IuWjfz6Uk/nGQRNKGf7byRWLM44
 y7zb75/5+p4MPyyJP8M/uiXzEYDKuubRtfx9PdmLgBUSMbtho6eB1x47dZWooaxe
 YKmcFjF80AmnwxHb+Te2rZHPeIYr+5hLBaEq7xaLQf/nAS3y5z1PIfI2wVQ5mXPz
 D599jHHda/6oSAKCVTq2fKfnlR6fetm5j66xOQINpD+G5b5tNSpllXJDamFZxFgP
 DiQAOFzdnRYnK7yTiLWVl1q76SVRxqsGz7/5Ak+NRj2OQK2wRkLzHuZfiV/8r0pk
 ksi6Ew9TerXkstoTQsSToPQxB2VvosSajNU3Oy27pmM0oal1XxP0LIPz9sMor5/g
 tfk5f6Yz/+FFIfXj3cZffZNdhsJgejmcqPdrSdCOV3sBrblnIMQNpHiYg4jGztoj
 IjYKYPVpSaWiSZLQOaK2moTEvm9CfQz1TQCF+/Kz88LX6/7ZaDJFxHG2FDEob0sg
 6KVbrZWweLI=
 =PAh+
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 "These update the ARM cpufreq drivers and fix up the CPPC cpufreq
  driver after recent changes, update the OPP code and PM documentation
  and add power sequences support to the system reboot and power off
  code.

  Specifics:

   - Add Tegra234 cpufreq support (Sumit Gupta)

   - Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
     Rex-BC Chen, and Jia-Wei Chang)

   - Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
     Pierre Gondois)

   - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
     Oudjana)

   - Use list iterator only inside the list_for_each_entry loop
     (Xiaomeng Tong, and Jakob Koschel)

   - New APIs related to finding OPP based on interconnect bandwidth
     (Krzysztof Kozlowski)

   - Fix the missing of_node_put() in _bandwidth_supported() (Dan
     Carpenter)

   - Cleanups (Krzysztof Kozlowski, and Viresh Kumar)

   - Add Out of Band mode description to the intel-speed-select utility
     documentation (Srinivas Pandruvada)

   - Add power sequences support to the system reboot and power off code
     and make related platform-specific changes for multiple platforms
     (Dmitry Osipenko, Geert Uytterhoeven)"

* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
  cpufreq: CPPC: Fix unused-function warning
  cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
  Documentation: admin-guide: PM: Add Out of Band mode
  kernel/reboot: Change registration order of legacy power-off handler
  m68k: virt: Switch to new sys-off handler API
  kernel/reboot: Add devm_register_restart_handler()
  kernel/reboot: Add devm_register_power_off_handler()
  soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
  reboot: Remove pm_power_off_prepare()
  regulator: pfuze100: Use devm_register_sys_off_handler()
  ACPI: power: Switch to sys-off handler API
  memory: emif: Use kernel_can_power_off()
  mips: Use do_kernel_power_off()
  ia64: Use do_kernel_power_off()
  x86: Use do_kernel_power_off()
  sh: Use do_kernel_power_off()
  m68k: Switch to new sys-off handler API
  powerpc: Use do_kernel_power_off()
  xen/x86: Use do_kernel_power_off()
  parisc: Use do_kernel_power_off()
  ...
2022-05-30 11:37:26 -07:00
Linus Torvalds
44d35720c9 sysctl changes for v5.19-rc1
For two kernel releases now kernel/sysctl.c has been being cleaned up
 slowly, since the tables were grossly long, sprinkled with tons of #ifdefs and
 all this caused merge conflicts with one susbystem or another.
 
 This tree was put together to help try to avoid conflicts with these cleanups
 going on different trees at time. So nothing exciting on this pull request,
 just cleanups.
 
 I actually had this sysctl-next tree up since v5.18 but I missed sending a
 pull request for it on time during the last merge window. And so these changes
 have been being soaking up on sysctl-next and so linux-next for a while.
 The last change was merged May 4th.
 
 Most of the compile issues were reported by 0day and fixed.
 
 To help avoid a conflict with bpf folks at Daniel Borkmann's request
 I merged bpf-next/pr/bpf-sysctl into sysctl-next to get the effor which
 moves the BPF sysctls from kernel/sysctl.c to BPF core.
 
 Possible merge conflicts and known resolutions as per linux-next:
 
 bfp:
 https://lkml.kernel.org/r/20220414112812.652190b5@canb.auug.org.au
 
 rcu:
 https://lkml.kernel.org/r/20220420153746.4790d532@canb.auug.org.au
 
 powerpc:
 https://lkml.kernel.org/r/20220520154055.7f964b76@canb.auug.org.au
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmKOq8ASHG1jZ3JvZkBr
 ZXJuZWwub3JnAAoJEM4jHQowkoinDAkQAJVo5YVM9f74UwYp4PQhTpjxJBCjRoZD
 z1u9bp5rMj2ujTC8Fr7VmzKaHrb8+r1C1WvCvZtIzemYNB4lZUrHpVDYfXuXiPRB
 ihPmEjhlPO5PFBx6cVCpI3cu9bEhG00rLc1QXnABx/pXwNPcOTJAGZJVamZvqubk
 chjgZrb7N+adHPfvS55v1+zpwdeKfpp5U3zuu5qlT/nn0GS0HCVzOj5fj4oC4wtJ
 IqfUubo+FX50Ga58yQABWNrjaPD9Crykz5ohVazy3ElQl0hJ4VsK65ct3blqc2vz
 1Bb8kPpWuv6aZ5nr1lCVE8qvF4ZIL33ySvpg5BSdWLQEDrBbSpzvJe9Yn7wgR+eq
 y7fhpO24+zRM82EoDMEvyxX9u1n1RsvoXRtf3ds9BGf63MUxk8a1cgjlU6vuyO2U
 JhDmfM1xzdKvPoY4COOnHzcAiIqzItTqKd09N5y0cahmYstROU8lvp9huhTAHqk1
 SjQMbLIZG7OnX8ZeQcR1EB8sq/IOPZT48ejj0iJmQ8FyMaep71MOQLYyLPAq4lgh
 JHXm8P6QdB57jfJbqAeNSyZoK0qdxOUR/83Zcah7Jjns6vkju1DNatEsaEEI2y2M
 4n7/rkHeZ3TyFHBUX4e9FomKvGLsAalDBRiqsuxLSOPMU8rGrNLAslOAtKwvp90X
 4ht3M2VP098l
 =btwh
 -----END PGP SIGNATURE-----

Merge tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

Pull sysctl updates from Luis Chamberlain:
 "For two kernel releases now kernel/sysctl.c has been being cleaned up
  slowly, since the tables were grossly long, sprinkled with tons of
  #ifdefs and all this caused merge conflicts with one susbystem or
  another.

  This tree was put together to help try to avoid conflicts with these
  cleanups going on different trees at time. So nothing exciting on this
  pull request, just cleanups.

  Thanks a lot to the Uniontech and Huawei folks for doing some of this
  nasty work"

* tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits)
  sched: Fix build warning without CONFIG_SYSCTL
  reboot: Fix build warning without CONFIG_SYSCTL
  kernel/kexec_core: move kexec_core sysctls into its own file
  sysctl: minor cleanup in new_dir()
  ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n
  fs/proc: Introduce list_for_each_table_entry for proc sysctl
  mm: fix unused variable kernel warning when SYSCTL=n
  latencytop: move sysctl to its own file
  ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y
  ftrace: Fix build warning
  ftrace: move sysctl_ftrace_enabled to ftrace.c
  kernel/do_mount_initrd: move real_root_dev sysctls to its own file
  kernel/delayacct: move delayacct sysctls to its own file
  kernel/acct: move acct sysctls to its own file
  kernel/panic: move panic sysctls to its own file
  kernel/lockdep: move lockdep sysctls to its own file
  mm: move page-writeback sysctls to their own file
  mm: move oom_kill sysctls to their own file
  kernel/reboot: move reboot sysctls to its own file
  sched: Move energy_aware sysctls to topology.c
  ...
2022-05-26 16:57:20 -07:00
Dmitry Osipenko
da007f171f kernel/reboot: Change registration order of legacy power-off handler
We're unconditionally registering sys-off handler for the legacy
pm_power_off() callback, this causes problem for platforms that don't
use power-off handlers at all and should be halted. Now reboot syscall
assumes that there is a power-off handler installed and tries to power
off system instead of halting it.

To fix the trouble, move the handler's registration to the reboot syscall
and check the pm_power_off() presence.

Fixes: 0e2110d2e9 ("kernel/reboot: Add kernel_can_power_off()")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-25 14:51:40 +02:00
Dmitry Osipenko
6779db970b kernel/reboot: Add devm_register_restart_handler()
Add devm_register_restart_handler() helper that registers sys-off
handler using restart mode and with a default priority. Most drivers
will want to register restart handler with a default priority, so this
helper will reduce the boilerplate code and make code easier to read and
follow.

Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-19 19:30:31 +02:00
Dmitry Osipenko
d2c5415327 kernel/reboot: Add devm_register_power_off_handler()
Add devm_register_power_off_handler() helper that registers sys-off
handler using power-off mode and with a default priority. Most drivers
will want to register power-off handler with a default priority, so this
helper will reduce the boilerplate code and make code easier to read and
follow.

Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-19 19:30:31 +02:00
Dmitry Osipenko
5b71808eb7 reboot: Remove pm_power_off_prepare()
All pm_power_off_prepare() users were converted to sys-off handler API.
Remove the obsolete global callback variable.

Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-19 19:30:31 +02:00
Dmitry Osipenko
fb61375ecf kernel/reboot: Add register_platform_power_off()
Add platform-level registration helpers that will ease transition of the
arch/platform power-off callbacks to the new sys-off based API, allowing
us to remove the global pm_power_off variable in the future.

Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-19 19:30:30 +02:00
Dmitry Osipenko
0e2110d2e9 kernel/reboot: Add kernel_can_power_off()
Add kernel_can_power_off() helper that replaces open-coded checks of
the global pm_power_off variable. This is a necessary step towards
supporting chained power-off handlers.

Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-19 19:30:30 +02:00
Dmitry Osipenko
5d34b41aa4 kernel/reboot: Add stub for pm_power_off
Add weak stub for the global pm_power_off callback variable. This will
allow us to remove pm_power_off definitions from arch/ code and transition
to the new sys-off based API that will replace the global variable.

Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-19 19:30:30 +02:00
Dmitry Osipenko
2b6aa7332f kernel/reboot: Add do_kernel_power_off()
Add do_kernel_power_off() helper that will remove open-coded pm_power_off
invocations from the architecture code. This is the first step on the way
to remove the global pm_power_off variable, which will allow us to
implement consistent power-off chaining support.

Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-19 19:30:30 +02:00
Dmitry Osipenko
7b9a3de9ff kernel/reboot: Wrap legacy power-off callbacks into sys-off handlers
Wrap legacy power-off callbacks into sys-off handlers in order to
support co-existence of both legacy and new callbacks while we're
in process of upgrading legacy callbacks to the new API.

Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-19 19:30:30 +02:00
Dmitry Osipenko
232edc2f72 kernel/reboot: Introduce sys-off handler API
In order to support power-off chaining we need to get rid of the global
pm_* variables, replacing them with the new kernel API functions that
support chaining.

Introduce new generic sys-off handler API that brings the following
features:

1. Power-off and restart handlers are registered using same API function
   that supports chaining, hence all power-off and restart modes will
   support chaining using this unified function.

2. Prevents notifier priority collisions by disallowing registration of
   multiple handlers at the non-default priority level.

3. Supports passing opaque user argument to callback, which allows us to
   remove global variables from drivers.

This patch adds support of the following sys-off modes:

- SYS_OFF_MODE_POWER_OFF_PREPARE that replaces global pm_power_off_prepare
  variable and provides chaining support for power-off-prepare handlers.

- SYS_OFF_MODE_POWER_OFF that replaces global pm_power_off variable and
  provides chaining support for power-off handlers.

- SYS_OFF_MODE_RESTART that provides a better restart API, removing a need
  from drivers to have a global scratch variable by utilizing the opaque
  callback argument.

Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-19 19:30:30 +02:00
YueHaibing
764aaf44cd reboot: Fix build warning without CONFIG_SYSCTL
If CONFIG_SYSCTL is n, build warn:

kernel/reboot.c:443:20: error: ‘kernel_reboot_sysctls_init’ defined but not used [-Werror=unused-function]
 static void __init kernel_reboot_sysctls_init(void)
                    ^~~~~~~~~~~~~~~~~~~~~~~~~~

Move kernel_reboot_sysctls_init() to #ifdef block to fix this.

Fixes: 06d177662f ("kernel/reboot: move reboot sysctls to its own file")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-05-09 16:54:56 -07:00
John Ogness
2bb2b7b57f printk: add functions to prefer direct printing
Once kthread printing is available, console printing will no longer
occur in the context of the printk caller. However, there are some
special contexts where it is desirable for the printk caller to
directly print out kernel messages. Using pr_flush() to wait for
threaded printers is only possible if the caller is in a sleepable
context and the kthreads are active. That is not always the case.

Introduce printk_prefer_direct_enter() and printk_prefer_direct_exit()
functions to explicitly (and globally) activate/deactivate preferred
direct console printing. The term "direct console printing" refers to
printing to all enabled consoles from the context of the printk
caller. The term "prefer" is used because this type of printing is
only best effort. If the console is currently locked or other
printers are already actively printing, the printk caller will need
to rely on the other contexts to handle the printing.

This preferred direct printing is how all printing has been handled
until now (unless it was explicitly deferred).

When kthread printing is introduced, there may be some unanticipated
problems due to kthreads being unable to flush important messages.
In order to minimize such risks, preferred direct printing is
activated for the primary important messages when the system
experiences general types of major errors. These are:

 - emergency reboot/shutdown
 - cpu and rcu stalls
 - hard and soft lockups
 - hung tasks
 - warn
 - sysrq

Note that since kthread printing does not yet exist, no behavior
changes result from this commit. This is only implementing the
counter and marking the various places where preferred direct
printing is active.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org> # for RCU
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220421212250.565456-13-john.ogness@linutronix.de
2022-04-22 21:30:58 +02:00
tangmeng
06d177662f kernel/reboot: move reboot sysctls to its own file
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

All filesystem syctls now get reviewed by fs folks. This commit
follows the commit of fs, move the poweroff_cmd and ctrl-alt-del
sysctls to its own file, kernel/reboot.c.

Signed-off-by: tangmeng <tangmeng@uniontech.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-04-06 13:43:44 -07:00
Linus Torvalds
f78e9de80f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
 "Just one new driver (Cypress StreetFighter touchkey), and no input
  core changes this time.

  Plus various fixes and enhancements to existing drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
  Input: iforce - fix control-message timeout
  Input: wacom_i2c - use macros for the bit masks
  Input: ili210x - reduce sample period to 15ms
  Input: ili210x - improve polled sample spacing
  Input: ili210x - special case ili251x sample read out
  Input: elantench - fix misreporting trackpoint coordinates
  Input: synaptics-rmi4 - Fix device hierarchy
  Input: i8042 - Add quirk for Fujitsu Lifebook T725
  Input: cap11xx - add support for cap1206
  Input: remove unused header <linux/input/cy8ctmg110_pdata.h>
  Input: ili210x - add ili251x firmware update support
  Input: ili210x - export ili251x version details via sysfs
  Input: ili210x - use resolution from ili251x firmware
  Input: pm8941-pwrkey - respect reboot_mode for warm reset
  reboot: export symbol 'reboot_mode'
  Input: max77693-haptic - drop unneeded MODULE_ALIAS
  Input: cpcap-pwrbutton - do not set input parent explicitly
  Input: max8925_onkey - don't mark comment as kernel-doc
  Input: ads7846 - do not attempt IRQ workaround when deferring probe
  Input: ads7846 - use input_set_capability()
  ...
2021-11-12 11:53:16 -08:00
Eric W. Biederman
a52f60fa29 reboot: Remove the unreachable panic after do_exit in reboot(2)
Link: https://lkml.kernel.org/r/20211020174406.17889-3-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2021-10-20 13:09:51 -05:00
Shawn Guo
d46b3f5bc0 reboot: export symbol 'reboot_mode'
Some drivers like Qualcomm pm8941-pwrkey need to access 'reboot_mode'
for triggering reboot between cold and warm mode.  Export the symbol, so
that drivers built as module can still access the symbol.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210714095850.27185-2-shawn.guo@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16 21:31:06 -07:00
Matti Vaittinen
dfa19b1138
reboot: Add hardware protection power-off
There can be few cases when we need to shut-down the system in order to
protect the hardware. Currently this is done at least by the thermal core
when temperature raises over certain limit.

Some PMICs can also generate interrupts for example for over-current or
over-voltage, voltage drops, short-circuit, ... etc. On some systems
these are a sign of hardware failure and only thing to do is try to
protect the rest of the hardware by shutting down the system.

Add shut-down logic which can be used by all subsystems instead of
implementing the shutdown in each subsystem. The logic is stolen from
thermal_core with difference of using atomic_t instead of a mutex in
order to allow calls directly from IRQ context and changing the WARN()
to pr_emerg() as discussed here:
https://lore.kernel.org/lkml/YJuPwAZroVZ%2Fw633@alley/
and here:
https://lore.kernel.org/linux-iommu/20210331093104.383705-4-geert+renesas@glider.be/

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/e83ec1ca9408f90c857ea9dcdc57b14d9037b03f.1622628333.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-21 13:08:36 +01:00
Josef Bacik
9d3fcb28f9 Revert "PM: ACPI: reboot: Use S5 for reboot"
This reverts commit d60cd06331.

This patch causes a panic when rebooting my Dell Poweredge r440.  I do
not have the full panic log as it's lost at that stage of the reboot and
I do not have a serial console.  Reverting this patch makes my system
able to reboot again.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-18 16:58:02 +01:00
Matteo Croce
40247e55ba reboot: hide from sysfs not applicable settings
Not all the reboot settings from both the kernel command line or sysfs
interface are available to all platforms.

Filter out reboot_type and reboot_force which are x86 only, and also
remove reboot_cpu on kernels without SMP support.

This saves some space, and avoid confusing the user with settings which
will have no effect.

Link: https://lkml.kernel.org/r/20201130173717.198952-3-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 22:46:19 -08:00
Matteo Croce
1a9d079f43 reboot: allow to override reboot type if quirks are found
Patch series "reboot: sysfs improvements".

Some improvements to the sysfs reboot interface: hide not working settings
and support machines with known reboot quirks.

This patch (of 2):

On some machines a quirk can force a specific reboot type.  Quirks are
found during a DMI scan, the list of machines which need special reboot
handling is defined in reboot_dmi_table.

The kernel command line reboot= option overrides this via a global
variable `reboot_default`, so that the reboot type requested in the
command line is really performed.

This was not true when setting the reboot type via the new sysfs
interface.  Fix this by setting reboot_default upon the first change, like
reboot_setup() does for the command line.

Link: https://lkml.kernel.org/r/20201130173717.198952-1-mcroce@linux.microsoft.com
Link: https://lkml.kernel.org/r/20201130173717.198952-2-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 22:46:19 -08:00
Matteo Croce
0c5c0179e2 reboot: remove cf9_safe from allowed types and rename cf9_force
BOOT_CF9_SAFE_STR is an internal value used only by the x86 code and it's
not possible to set it from userspace.

Remove it, and rename 'cf9_force' to 'pci', so to make it coherent with
the kernel command line reboot= option.

Tested with this script:

	cd /sys/kernel/reboot/

	for i in cold warm hard soft gpio; do
		echo $i >mode
		read j <mode
		[ $i = $j ] || echo "mode $i != $j"
	done

	for i in bios acpi kbd triple efi pci; do
		echo $i >type
		read j <type
		[ $i = $j ] || echo "type $i != $j"
	done

	for i in $(seq 0 $(nproc --ignore=1)); do
		echo $i >cpu
		read j <cpu
		[ $i = $j ] || echo "cpu $i != $j"
	done

	for i in 0 1; do
		echo $i >force
		read j <force
		[ $i = $j ] || echo "force $i != $j"
	done

Link: https://lkml.kernel.org/r/20201113015900.543923-1-mcroce@linux.microsoft.com
Fixes: eab8da48579d ("reboot: allow to specify reboot mode via sysfs")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 22:46:19 -08:00
Matteo Croce
2c622ed0ea reboot: allow to specify reboot mode via sysfs
The kernel cmdline reboot= option offers some sort of control on how the
reboot is issued.

We don't always know in advance what type of reboot to perform.

Sometimes a warm reboot is preferred to persist certain memory regions
across the reboot.  Others a cold one is needed to apply a future system
update that makes a memory memory model change, like changing the base
page size or resizing a persistent memory region.

Or simply we want to enable reboot_force because we noticed that
something bad happened.

Add handles in sysfs to allow setting these reboot options, so they can
be changed when the system is booted, other than at boot time.

The handlers are under <sysfs>/kernel/reboot, can be read to get the
current configuration and written to alter it.

	# cd /sys/kernel/reboot/

	# grep . *
	cpu:0
	force:0
	mode:cold
	type:acpi

	# echo 2 >cpu
	# echo yes >force
	# echo soft >mode
	# echo bios >type

	# grep . *
	cpu:2
	force:1
	mode:soft
	type:bios

Before setting anything, check for CAP_SYS_BOOT capability, so it's
possible to allow an unpriviledged process to change these settings simply
by relaxing the handles permissions, without opening them to the world.

[natechancellor@gmail.com: fix variable assignments in type_store]
  Link: https://lkml.kernel.org/r/20201112035023.974748-1-natechancellor@gmail.com
  Link: https://github.com/ClangBuiltLinux/linux/issues/1197

Link: https://lkml.kernel.org/r/20201110202746.9690-1-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 22:46:19 -08:00
Matteo Croce
f9a90501fa reboot: refactor and comment the cpu selection code
Small improvements to the code, without changing the way it works:

 - use a local variable, to avoid a small time lapse where reboot_cpu
   can have an invalid value

 - comment the code which is not easy to understand at a glance

 - merge two identical code blocks into one

 - replace pointer arithmetics with equivalent array syntax

Link: https://lkml.kernel.org/r/20201103214025.116799-4-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Robin Holt <robinmholt@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 22:46:19 -08:00
Rafael J. Wysocki
42b4ca04cb Merge branches 'pm-sleep', 'pm-acpi', 'pm-domains' and 'powercap'
* pm-sleep:
  PM: sleep: Add dev_wakeup_path() helper
  PM / suspend: fix kernel-doc markup
  PM: sleep: Print driver flags for all devices during suspend/resume

* pm-acpi:
  PM: ACPI: Refresh wakeup device power configuration every time
  PM: ACPI: PCI: Drop acpi_pm_set_bridge_wakeup()
  PM: ACPI: reboot: Use S5 for reboot

* pm-domains:
  PM: domains: create debugfs nodes when adding power domains
  PM: domains: replace -ENOTSUPP with -EOPNOTSUPP

* powercap:
  powercap: Adjust printing the constraint name with new line
  powercap: RAPL: Add AMD Fam19h RAPL support
  powercap: Add AMD Fam17h RAPL support
  powercap/intel_rapl_msr: Convert rapl_msr_priv into pointer
  x86/msr-index: sort AMD RAPL MSRs by address
2020-12-15 15:26:14 +01:00
Matteo Croce
df5b0ab3e0 reboot: fix overflow parsing reboot cpu number
Limit the CPU number to num_possible_cpus(), because setting it to a
value lower than INT_MAX but higher than NR_CPUS produces the following
error on reboot and shutdown:

    BUG: unable to handle page fault for address: ffffffff90ab1bb0
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0
    Oops: 0000 [#1] SMP
    CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm #110
    Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
    RIP: 0010:migrate_to_reboot_cpu+0xe/0x60
    Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c
    RSP: 0018:ffffc90000013e08 EFLAGS: 00010246
    RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000
    RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0
    RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
    R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000
    FS:  00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
      __do_sys_reboot.cold+0x34/0x5b
      do_syscall_64+0x2d/0x40

Fixes: 1b3a5d02ee ("reboot: move arch/x86 reboot= handling to generic kernel")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103214025.116799-3-mcroce@linux.microsoft.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14 11:26:03 -08:00
Matteo Croce
8b92c4ff44 Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint"
Patch series "fix parsing of reboot= cmdline", v3.

The parsing of the reboot= cmdline has two major errors:

 - a missing bound check can crash the system on reboot

 - parsing of the cpu number only works if specified last

Fix both.

This patch (of 2):

This reverts commit 616feab753.

kstrtoint() and simple_strtoul() have a subtle difference which makes
them non interchangeable: if a non digit character is found amid the
parsing, the former will return an error, while the latter will just
stop parsing, e.g.  simple_strtoul("123xyx") = 123.

The kernel cmdline reboot= argument allows to specify the CPU used for
rebooting, with the syntax `s####` among the other flags, e.g.
"reboot=warm,s31,force", so if this flag is not the last given, it's
silently ignored as well as the subsequent ones.

Fixes: 616feab753 ("kernel/reboot.c: convert simple_strtoul to kstrtoint")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103214025.116799-2-mcroce@linux.microsoft.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14 11:26:03 -08:00
Kai-Heng Feng
d60cd06331 PM: ACPI: reboot: Use S5 for reboot
After reboot, it's not possible to use hotkeys to enter BIOS setup
and boot menu on some HP laptops.

BIOS folks identified the root cause is the missing _PTS call, and
BIOS is expecting _PTS to do proper reset.

Using S5 for reboot is default behavior under Windows, "A full
shutdown (S5) occurs when a system restart is requested" [1], so
let's do the same here.

[1] https://docs.microsoft.com/en-us/windows/win32/power/system-power-states

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-11-10 19:00:44 +01:00
Mike Rapoport
fb37409a01 arch: remove unicore32 port
The unicore32 port do not seem maintained for a long time now, there is no
upstream toolchain that can create unicore32 binaries and all the links to
prebuilt toolchains for unicore32 are dead. Even compilers that were
available are not supported by the kernel anymore.

Guenter Roeck says:

  I have stopped building unicore32 images since v4.19 since there is no
  available compiler that is still supported by the kernel. I am surprised
  that support for it has not been removed from the kernel.

Remove unicore32 port.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
2020-07-01 12:09:13 +03:00
Kees Cook
6d3cf962dd printk: Collapse shutdown types into a single dump reason
To turn the KMSG_DUMP_* reasons into a more ordered list, collapse
the redundant KMSG_DUMP_(RESTART|HALT|POWEROFF) reasons into
KMSG_DUMP_SHUTDOWN. The current users already don't meaningfully
distinguish between them, so there's no need to, as discussed here:
https://lore.kernel.org/lkml/CA+CK2bAPv5u1ih5y9t5FUnTyximtFCtDYXJCpuyjOyHNOkRdqw@mail.gmail.com/

Link: https://lore.kernel.org/lkml/20200515184434.8470-2-keescook@chromium.org/
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-30 10:34:03 -07:00
Thomas Gleixner
457c899653 treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Aaro Koskinen
b287a25a71 panic/reboot: allow specifying reboot_mode for panic only
Allow specifying reboot_mode for panic only.  This is needed on systems
where ramoops is used to store panic logs, and user wants to use warm
reset to preserve those, while still having cold reset on normal
reboots.

Link: http://lkml.kernel.org/r/20190322004735.27702-1-aaro.koskinen@iki.fi
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:51 -07:00
Oleksij Rempel
74f008f251
kernel/reboot.c: export pm_power_off_prepare
Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-11 16:13:24 +01:00
Pingfan Liu
55f2503c3b PM / reboot: Eliminate race between reboot and suspend
At present, "systemctl suspend" and "shutdown" can run in parrallel. A
system can suspend after devices_shutdown(), and resume. Then the shutdown
task goes on to power off. This causes many devices are not really shut
off. Hence replacing reboot_mutex with system_transition_mutex (renamed
from pm_mutex) to achieve the exclusion. The renaming of pm_mutex as
system_transition_mutex can be better to reflect the purpose of the mutex.

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-06 12:35:20 +02:00