mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 00:21:59 +00:00
5520b7e7d2
779 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Ingo Molnar
|
5520b7e7d2 |
x86/boot/e820: Remove spurious asm/e820/api.h inclusions
A commonly used lowlevel x86 header, asm/pgtable.h, includes asm/e820/api.h spuriously, without making direct use of it. Removing it is not simple: over the years various .c code learned to rely on this indirect inclusion. Remove the unnecessary include - this should speed up the kernel build a bit, as a large header is not included anymore in totally unrelated code. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
66441bd3cf |
x86/boot/e820: Move asm/e820.h to asm/e820/api.h
In line with asm/e820/types.h, move the e820 API declarations to asm/e820/api.h and update all usage sites. This is just a mechanical, obviously correct move & replace patch, there will be subsequent changes to clean up the code and to make better use of the new header organization. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Bjorn Helgaas
|
89e9f7bcd8 |
x86/PCI: Ignore _CRS on Supermicro X8DTH-i/6/iF/6F
Martin reported that the Supermicro X8DTH-i/6/iF/6F advertises incorrect host bridge windows via _CRS: pci_root PNP0A08:00: host bridge window [io 0xf000-0xffff] pci_root PNP0A08:01: host bridge window [io 0xf000-0xffff] Both bridges advertise the 0xf000-0xffff window, which cannot be correct. Work around this by ignoring _CRS on this system. The downside is that we may not assign resources correctly to hot-added PCI devices (if they are possible on this system). Link: https://bugzilla.kernel.org/show_bug.cgi?id=42606 Reported-by: Martin Burnicki <martin.burnicki@meinberg.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org |
||
Linus Torvalds
|
aa3ecf388a |
xen: features and fixes for 4.10 rc0
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQEcBAABAgAGBQJYT5HMAAoJELDendYovxMvhNQH/1g/3ahM4JKN8Z0SbjKBEdQm yj2xOj6cE3l6wMSUblKjZD2DLLhpmcHT/E97Xro/lZQEfQJoMXXWWDFowMU/P1LA mJxb7Fzq5Wr+6eGSAlIQB270MrpNi/luf+CWHMwVA3V7R3KRXwonOdGQSkISIzCd tgIydEA3a9r2+HgeIBpZFZ4GcSrJQU75krMyl2tjD1C+jeYVd+zdoj2OnDsZQDZQ hDWApMpNbpSBAn7JtSSdXWSTBsGH0lUECebeYPhPQ2sX2P6Y8+UCGwA7i6FFdbTa agXfVSdRz8dCe3k19VcKDAw6nK9BTTMnEeEHmkmygIh6wuHPP44CzigTXIbJoXI= =zjfm -----END PGP SIGNATURE----- Merge tag 'for-linus-4.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Xen features and fixes for 4.10 These are some fixes, a move of some arm related headers to share them between arm and arm64 and a series introducing a helper to make code more readable. The most notable change is David stepping down as maintainer of the Xen hypervisor interface. This results in me sending you the pull requests for Xen related code from now on" * tag 'for-linus-4.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits) xen/balloon: Only mark a page as managed when it is released xenbus: fix deadlock on writes to /proc/xen/xenbus xen/scsifront: don't request a slot on the ring until request is ready xen/x86: Increase xen_e820_map to E820_X_MAX possible entries x86: Make E820_X_MAX unconditionally larger than E820MAX xen/pci: Bubble up error and fix description. xen: xenbus: set error code on failure xen: set error code on failures arm/xen: Use alloc_percpu rather than __alloc_percpu arm/arm64: xen: Move shared architecture headers to include/xen/arm xen/events: use xen_vcpu_id mapping for EVTCHNOP_status xen/gntdev: Use VM_MIXEDMAP instead of VM_IO to avoid NUMA balancing xen-scsifront: Add a missing call to kfree MAINTAINERS: update XEN HYPERVISOR INTERFACE xenfs: Use proc_create_mount_point() to create /proc/xen xen-platform: use builtin_pci_driver xen-netback: fix error handling output xen: make use of xenbus_read_unsigned() in xenbus xen: make use of xenbus_read_unsigned() in xen-pciback xen: make use of xenbus_read_unsigned() in xen-fbfront ... |
||
Konrad Rzeszutek Wilk
|
577f79e411 |
xen/pci: Bubble up error and fix description.
The function is never called under PV guests, and only shows up when MSI (or MSI-X) cannot be allocated. Convert the message to include the error value. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> |
||
Sebastian Andrzej Siewior
|
c8b877a5e5 |
x86/pci/amd-bus: Convert to hotplug state machine
Install the callbacks via the state machine and let the core invoke
the callbacks on the already online CPUs.
The smp_call_function_single() is dropped because the ONLINE callback is
invoked on the target CPU since commit
|
||
|
Linus Torvalds
|
e6e3d8f8f4 |
PCI changes for the v4.9 merge window:
Enumeration
microblaze: Add multidomain support for procfs (Bharat Kumar Gogada)
Resource management
Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie)
Ignore requested alignment for VF BARs (Yongji Xie)
PCI device hotplug
Make core explicitly non-modular (Paul Gortmaker)
PCIe native device hotplug
Rename pcie_isr() locals for clarity (Bjorn Helgaas)
Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas)
Remove unnecessary guard (Bjorn Helgaas)
Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas)
Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas)
Clear attention LED on device add (Keith Busch)
Allow exclusive userspace control of indicators (Keith Busch)
Process all hotplug events before looking for new ones (Mayurkumar Patel)
Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel)
Don't re-read Slot Status when handling surprise event (Mayurkumar Patel)
Make explicitly non-modular (Paul Gortmaker)
Power management
Afford direct-complete to devices with non-standard PM (Lukas Wunner)
Query platform firmware for device power state (Lukas Wunner)
Recognize D3cold in pci_update_current_state() (Lukas Wunner)
Avoid unnecessary resume after direct-complete (Lukas Wunner)
Make explicitly non-modular (Paul Gortmaker)
Virtualization
Mark Atheros AR9580 to avoid bus reset (Maik Broemme)
Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu)
MSI
Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto)
AER
Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas)
Remove aerdriver.forceload kernel parameter (Bjorn Helgaas)
Fix aer_probe() kernel-doc comment (Cao jin)
Add bus flag to skip source ID matching (Jon Derrick)
Avoid memory allocation in interrupt handling path (Jon Derrick)
Cache capability position (Keith Busch)
Make explicitly non-modular (Paul Gortmaker)
Remove duplicate AER severity translation (Tyler Baicar)
Send correct severity to calculate AER severity (Tyler Baicar)
Precision Time Measurement
Add Precision Time Measurement (PTM) support (Jonathan Yong)
Add PTM clock granularity information (Bjorn Helgaas)
Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas)
Generic host bridge driver
Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
Make explicitly non-modular (Paul Gortmaker)
Altera host bridge driver
Remove redundant platform_get_resource() return value check (Bjorn Helgaas)
Poll for link training status after retraining the link (Ley Foon Tan)
Rework config accessors for use without a struct pci_bus (Ley Foon Tan)
Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan)
Make MSI explicitly non-modular (Paul Gortmaker)
Make explicitly non-modular (Paul Gortmaker)
Relax device number checking to allow SR-IOV (Po Liu)
ARM Versatile host bridge driver
Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
Axis ARTPEC-6 host bridge driver
Drop __init from artpec6_add_pcie_port() (Niklas Cassel)
Freescale i.MX6 host bridge driver
Make explicitly non-modular (Paul Gortmaker)
Intel VMD host bridge driver
Add quirk for AER to ignore source ID (Jon Derrick)
Allocate IRQ lists with correct MSI-X count (Jon Derrick)
Convert to use pci_alloc_irq_vectors() API (Jon Derrick)
Eliminate vmd_vector member from list type (Jon Derrick)
Eliminate index member from IRQ list (Jon Derrick)
Synchronize with RCU freeing MSI IRQ descs (Keith Busch)
Request userspace control of PCIe hotplug indicators (Keith Busch)
Move VMD driver to drivers/pci/host (Keith Busch)
Marvell Aardvark host bridge driver
Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun)
Microsoft Hyper-V host bridge driver
Use zero-length array in struct pci_packet (Dexuan Cui)
Use pci_function_description[0] in struct definitions (Dexuan Cui)
Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui)
Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui)
Handle hv_pci_generic_compl() error case (Dexuan Cui)
Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun)
NVIDIA Tegra host bridge driver
Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
Remove redundant _data suffix (Thierry Reding)
Use of_device_get_match_data() (Thierry Reding)
Qualcomm host bridge driver
Make explicitly non-modular (Paul Gortmaker)
Renesas R-Car host bridge driver
Consolidate register space lookup and ioremap (Bjorn Helgaas)
Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven)
Add multi-MSI support (Grigory Kletsko)
Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
Fix some checkpatch warnings (Sergei Shtylyov)
Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov)
Rockchip host bridge driver
Add DT bindings for Rockchip PCIe controller (Shawn Lin)
Add Rockchip PCIe controller support (Shawn Lin)
Improve the deassert sequence of four reset pins (Shawn Lin)
Fix wrong transmitted FTS count (Shawn Lin)
Increase the Max Credit update interval (Rajat Jain)
Samsung Exynos host bridge driver
Make explicitly non-modular (Paul Gortmaker)
ST Microelectronics SPEAr13xx host bridge driver
Make explicitly non-modular (Paul Gortmaker)
Synopsys DesignWare host bridge driver
Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas)
Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo)
Check LTSSM training bit before deciding link is up (Jisheng Zhang)
Move link wait definitions to .c file (Joao Pinto)
Wait for iATU enable (Joao Pinto)
Add iATU Unroll feature (Joao Pinto)
Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
Make explicitly non-modular (Paul Gortmaker)
Relax device number checking to allow SR-IOV (Po Liu)
Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand)
Remove redundant platform_get_resource() return value check (Wei Yongjun)
TI DRA7xx host bridge driver
Make explicitly non-modular (Paul Gortmaker)
TI Keystone host bridge driver
Propagate request_irq() failure (Wei Yongjun)
Xilinx AXI host bridge driver
Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada)
Clear interrupt register for invalid interrupt (Bharat Kumar Gogada)
Clear correct MSI set bit (Bharat Kumar Gogada)
Dispose of MSI virtual IRQ (Bharat Kumar Gogada)
Make explicitly non-modular (Paul Gortmaker)
Relax device number checking to allow SR-IOV (Po Liu)
Xilinx NWL host bridge driver
Expand error logging (Bharat Kumar Gogada)
Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada)
Make explicitly non-modular (Paul Gortmaker)
Miscellaneous
Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner)
portdrv: Make explicitly non-modular (Paul Gortmaker)
Make DPC explicitly non-modular (Paul Gortmaker)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0Aq4
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Summary of PCI changes for the v4.9 merge window:
Enumeration:
- microblaze: Add multidomain support for procfs (Bharat Kumar Gogada)
Resource management:
- Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie)
- Ignore requested alignment for VF BARs (Yongji Xie)
PCI device hotplug:
- Make core explicitly non-modular (Paul Gortmaker)
PCIe native device hotplug:
- Rename pcie_isr() locals for clarity (Bjorn Helgaas)
- Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas)
- Remove unnecessary guard (Bjorn Helgaas)
- Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas)
- Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas)
- Clear attention LED on device add (Keith Busch)
- Allow exclusive userspace control of indicators (Keith Busch)
- Process all hotplug events before looking for new ones (Mayurkumar Patel)
- Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel)
- Don't re-read Slot Status when handling surprise event (Mayurkumar Patel)
- Make explicitly non-modular (Paul Gortmaker)
Power management:
- Afford direct-complete to devices with non-standard PM (Lukas Wunner)
- Query platform firmware for device power state (Lukas Wunner)
- Recognize D3cold in pci_update_current_state() (Lukas Wunner)
- Avoid unnecessary resume after direct-complete (Lukas Wunner)
- Make explicitly non-modular (Paul Gortmaker)
Virtualization:
- Mark Atheros AR9580 to avoid bus reset (Maik Broemme)
- Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu)
MSI:
- Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto)
AER:
- Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas)
- Remove aerdriver.forceload kernel parameter (Bjorn Helgaas)
- Fix aer_probe() kernel-doc comment (Cao jin)
- Add bus flag to skip source ID matching (Jon Derrick)
- Avoid memory allocation in interrupt handling path (Jon Derrick)
- Cache capability position (Keith Busch)
- Make explicitly non-modular (Paul Gortmaker)
- Remove duplicate AER severity translation (Tyler Baicar)
- Send correct severity to calculate AER severity (Tyler Baicar)
Precision Time Measurement:
- Add Precision Time Measurement (PTM) support (Jonathan Yong)
- Add PTM clock granularity information (Bjorn Helgaas)
- Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas)
Generic host bridge driver:
- Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
- Make explicitly non-modular (Paul Gortmaker)
Altera host bridge driver:
- Remove redundant platform_get_resource() return value check (Bjorn Helgaas)
- Poll for link training status after retraining the link (Ley Foon Tan)
- Rework config accessors for use without a struct pci_bus (Ley Foon Tan)
- Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan)
- Make MSI explicitly non-modular (Paul Gortmaker)
- Make explicitly non-modular (Paul Gortmaker)
- Relax device number checking to allow SR-IOV (Po Liu)
ARM Versatile host bridge driver:
- Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
Axis ARTPEC-6 host bridge driver:
- Drop __init from artpec6_add_pcie_port() (Niklas Cassel)
Freescale i.MX6 host bridge driver:
- Make explicitly non-modular (Paul Gortmaker)
Intel VMD host bridge driver:
- Add quirk for AER to ignore source ID (Jon Derrick)
- Allocate IRQ lists with correct MSI-X count (Jon Derrick)
- Convert to use pci_alloc_irq_vectors() API (Jon Derrick)
- Eliminate vmd_vector member from list type (Jon Derrick)
- Eliminate index member from IRQ list (Jon Derrick)
- Synchronize with RCU freeing MSI IRQ descs (Keith Busch)
- Request userspace control of PCIe hotplug indicators (Keith Busch)
- Move VMD driver to drivers/pci/host (Keith Busch)
Marvell Aardvark host bridge driver:
- Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
- Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun)
Microsoft Hyper-V host bridge driver:
- Use zero-length array in struct pci_packet (Dexuan Cui)
- Use pci_function_description[0] in struct definitions (Dexuan Cui)
- Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui)
- Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui)
- Handle hv_pci_generic_compl() error case (Dexuan Cui)
- Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun)
NVIDIA Tegra host bridge driver:
- Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
- Remove redundant _data suffix (Thierry Reding)
- Use of_device_get_match_data() (Thierry Reding)
Qualcomm host bridge driver:
- Make explicitly non-modular (Paul Gortmaker)
Renesas R-Car host bridge driver:
- Consolidate register space lookup and ioremap (Bjorn Helgaas)
- Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven)
- Add multi-MSI support (Grigory Kletsko)
- Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
- Fix some checkpatch warnings (Sergei Shtylyov)
- Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov)
Rockchip host bridge driver:
- Add DT bindings for Rockchip PCIe controller (Shawn Lin)
- Add Rockchip PCIe controller support (Shawn Lin)
- Improve the deassert sequence of four reset pins (Shawn Lin)
- Fix wrong transmitted FTS count (Shawn Lin)
- Increase the Max Credit update interval (Rajat Jain)
Samsung Exynos host bridge driver:
- Make explicitly non-modular (Paul Gortmaker)
ST Microelectronics SPEAr13xx host bridge driver:
- Make explicitly non-modular (Paul Gortmaker)
Synopsys DesignWare host bridge driver:
- Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas)
- Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo)
- Check LTSSM training bit before deciding link is up (Jisheng Zhang)
- Move link wait definitions to .c file (Joao Pinto)
- Wait for iATU enable (Joao Pinto)
- Add iATU Unroll feature (Joao Pinto)
- Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
- Make explicitly non-modular (Paul Gortmaker)
- Relax device number checking to allow SR-IOV (Po Liu)
- Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand)
- Remove redundant platform_get_resource() return value check (Wei Yongjun)
TI DRA7xx host bridge driver:
- Make explicitly non-modular (Paul Gortmaker)
TI Keystone host bridge driver:
- Propagate request_irq() failure (Wei Yongjun)
Xilinx AXI host bridge driver:
- Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada)
- Clear interrupt register for invalid interrupt (Bharat Kumar Gogada)
- Clear correct MSI set bit (Bharat Kumar Gogada)
- Dispose of MSI virtual IRQ (Bharat Kumar Gogada)
- Make explicitly non-modular (Paul Gortmaker)
- Relax device number checking to allow SR-IOV (Po Liu)
Xilinx NWL host bridge driver:
- Expand error logging (Bharat Kumar Gogada)
- Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada)
- Make explicitly non-modular (Paul Gortmaker)
Miscellaneous:
- Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner)
- portdrv: Make explicitly non-modular (Paul Gortmaker)
- Make DPC explicitly non-modular (Paul Gortmaker)"
* tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (105 commits)
x86/PCI: VMD: Move VMD driver to drivers/pci/host
PCI: rockchip: Fix wrong transmitted FTS count
PCI: rockchip: Improve the deassert sequence of four reset pins
PCI: rockchip: Increase the Max Credit update interval
PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot
PCI/AER: Fix aer_probe() kernel-doc comment
PCI: Ignore requested alignment for VF BARs
PCI: Ignore requested alignment for PROBE_ONLY and fixed resources
PCI: Avoid unnecessary resume after direct-complete
PCI: Recognize D3cold in pci_update_current_state()
PCI: Query platform firmware for device power state
PCI: Afford direct-complete to devices with non-standard PM
PCI/AER: Cache capability position
PCI/AER: Avoid memory allocation in interrupt handling path
x86/PCI: VMD: Request userspace control of PCIe hotplug indicators
PCI: pciehp: Allow exclusive userspace control of indicators
ACPI / APEI: Send correct severity to calculate AER severity
PCI/AER: Remove duplicate AER severity translation
x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs
x86/PCI: VMD: Eliminate index member from IRQ list
...
|
||
|
Linus Torvalds
|
541efb7632 |
xen: features and fixes for 4.9-rc0
- Switch to new CPU hotplug mechanism.
- Support driver_override in pciback.
- Require vector callback for HVM guests (the alternate mechanism via
the platform device has been broken for ages).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX9lkNAAoJEFxbo/MsZsTRnd8IAKnCH9pd2c1GgAPse2s8yBUL
jh/nTQh+niVvpFA9elpfz+TrAIu4P0KLcnx6jhZ0Uv+Cmeaz5Ps+IaqyXBmqmeCm
hjrnDo6wEVB/1LMtzibNk0hQcIN73MUEIfUESjl1iiIw3lPDPMIihMbpCAzVzaRf
M8sInTTwcx0A9njUijEwT1wKV45hM7bpnAufChkxk3V3G2+JxBDYAQJCfW0u1DjR
WFpbGKyNetXSVSf6QVZhW+lTnqTAUk0a5IqOg6UbzzbsHM7KgzwxB0FXYMRsL8jV
3VNiRJovNy+0F3T1VewPXWFlWs+QFK1GH0Hbncc5kUATNBm/VOjNt8H0dwUlfLM=
=n1rz
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from David Vrabel:
"xen features and fixes for 4.9:
- switch to new CPU hotplug mechanism
- support driver_override in pciback
- require vector callback for HVM guests (the alternate mechanism via
the platform device has been broken for ages)"
* tag 'for-linus-4.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/x86: Update topology map for PV VCPUs
xen/x86: Initialize per_cpu(xen_vcpu, 0) a little earlier
xen/pciback: support driver_override
xen/pciback: avoid multiple entries in slot list
xen/pciback: simplify pcistub device handling
xen: Remove event channel notification through Xen PCI platform device
xen/events: Convert to hotplug state machine
xen/x86: Convert to hotplug state machine
x86/xen: add missing \n at end of printk warning message
xen/grant-table: Use kmalloc_array() in arch_gnttab_valloc()
xen: Make VPMU init message look less scary
xen: rename xen_pmu_init() in sys-hypervisor.c
hotplug: Prevent alloc/free of irq descriptors during cpu up/down (again)
xen/x86: Move irq allocation from Xen smp_op.cpu_up()
|
||
|
Bjorn Helgaas
|
bdf530984d |
Merge branch 'pci/host-vmd' into next
* pci/host-vmd: x86/PCI: VMD: Move VMD driver to drivers/pci/host x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs x86/PCI: VMD: Eliminate index member from IRQ list x86/PCI: VMD: Eliminate vmd_vector member from list type x86/PCI: VMD: Convert to use pci_alloc_irq_vectors() API x86/PCI: VMD: Allocate IRQ lists with correct MSI-X count PCI: Use positive flags in pci_alloc_irq_vectors() PCI: Update "pci=resource_alignment" documentation Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile |
||
Keith Busch
|
181ffd19cc |
x86/PCI: VMD: Move VMD driver to drivers/pci/host
Move the driver source and Kconfig to the PCI host bridge drivers directory and move the config option to a more appropriate sub-menu instead of occupying the top-level location. Update the Kconfig option with the X86_64 dependency that was implicitly included from the previous location, and add information about the module name when built as a loadable module. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Jon Derrick <jonathan.derrick@intel.com> |
||
KarimAllah Ahmed
|
72a9b18629 |
xen: Remove event channel notification through Xen PCI platform device
Ever since commit |
||
|
Keith Busch
|
3161832d58 |
x86/PCI: VMD: Request userspace control of PCIe hotplug indicators
Add set_dev_domain_options() to set PCI domain-specific options as devices are added. The first usage is to request exclusive userspace control of PCIe hotplug indicators in VMD domains. Devices in a VMD domain use PCIe hotplug Attention and Power Indicators in a non-standard way; tell pciehp to ignore the indicators so userspace can control them via the sysfs "attention" file. To determine whether a bus is within a VMD domain, add a bool to the pci_sysdata structure that the VMD driver sets during initialization. [bhelgaas: changelog] Requested-by: Kapil Karkra <kapil.karkra@intel.com> Tested-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Keith Busch
|
ee6ee49fd0 |
x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs
Fix a potential race when disabling MSI/MSI-X on a VMD domain device. If the VMD interrupt service is running, it may see a disabled IRQ. We can synchronize RCU just before freeing the MSI descriptor. This is safe since the irq_desc lock isn't held, and the descriptor is valid even though it is disabled. After vmd_msi_free(), though, the handler is reinitialized to handle_bad_irq(), so we can't let the VMD ISR's list iteration see the disabled IRQ after this. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com> |
||
Jon Derrick
|
b31822277a |
x86/PCI: VMD: Eliminate index member from IRQ list
Use math to discover the IRQ list index number relative to the IRQ list head. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com> |
||
|
Jon Derrick
|
53db86adc2 |
x86/PCI: VMD: Eliminate vmd_vector member from list type
Eliminate unused vmd and vector members from vmd_irq_list and discover the vector using pci_irq_vector(). Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com> |
||
|
Jon Derrick
|
75de9b4cd3 |
x86/PCI: VMD: Convert to use pci_alloc_irq_vectors() API
Convert to use the pci_alloc_irq_vectors() API. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> |
||
|
Jon Derrick
|
c68db51589 |
x86/PCI: VMD: Allocate IRQ lists with correct MSI-X count
To reduce the amount of memory required for IRQ lists, only allocate their space after calling pci_msix_enable_range() which may reduce the number of MSI-X vectors allocated. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> |
||
|
Ingo Molnar
|
d4b80afbba |
Merge branch 'linus' into x86/asm, to pick up recent fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Bjorn Helgaas
|
6af7e4f772 |
PCI: Mark Haswell Power Control Unit as having non-compliant BARs
The Haswell Power Control Unit has a non-PCI register (CONFIG_TDP_NOMINAL) where BAR 0 is supposed to be. This is erratum HSE43 in the spec update referenced below: The PCIe* Base Specification indicates that Configuration Space Headers have a base address register at offset 0x10. Due to this erratum, the Power Control Unit's CONFIG_TDP_NOMINAL CSR (Bus 1; Device 30; Function 3; Offset 0x10) is located where a base register is expected. Mark the PCU as having non-compliant BARs so we don't try to probe any of them. There are no other BARs on this device. Rename the quirk so it's not Broadwell-specific. Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-datasheet-vol-2.html (section 5.4, Device 30 Function 3) Link: https://bugzilla.kernel.org/show_bug.cgi?id=153881 Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Myron Stowe <myron.stowe@redhat.com> |
||
|
Keith Busch
|
21c80c9fef |
x86/PCI: VMD: Fix infinite loop executing irq's
We can't initialize the list head on deletion as this causes the node to
point to itself, which causes an infinite loop if vmd_irq() happens to be
servicing that node.
The list initialization was trying to fix a bug from multiple calls to
disable the same IRQ. Fix this instead by having the VMD driver track if
the interrupt is enabled.
[bhelgaas: changelog, add "Fixes"]
Fixes:
|
||
Kees Cook
|
404f6aac9b |
x86: Apply more __ro_after_init and const
Guided by grsecurity's analogous __read_only markings in arch/x86, this applies several uses of __ro_after_init to structures that are only updated during __init, and const for some structures that are never updated. Additionally extends __init markings to some functions that are only used during __init, and cleans up some missing C99 style static initializers. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Brown <david.brown@linaro.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Krause <minipli@googlemail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: PaX Team <pageexec@freemail.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-hardening@lists.openwall.com Link: http://lkml.kernel.org/r/20160808232906.GA29731@www.outflux.net Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Krzysztof Kozlowski
|
00085f1efa |
dma-mapping: use unsigned long for dma_attrs
The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer. Thus the pointer can point to const data.
However the attributes do not have to be a bitfield. Instead unsigned
long will do fine:
1. This is just simpler. Both in terms of reading the code and setting
attributes. Instead of initializing local attributes on the stack
and passing pointer to it to dma_set_attr(), just set the bits.
2. It brings safeness and checking for const correctness because the
attributes are passed by value.
Semantic patches for this change (at least most of them):
virtual patch
virtual context
@r@
identifier f, attrs;
@@
f(...,
- struct dma_attrs *attrs
+ unsigned long attrs
, ...)
{
...
}
@@
identifier r.f;
@@
f(...,
- NULL
+ 0
)
and
// Options: --all-includes
virtual patch
virtual context
@r@
identifier f, attrs;
type t;
@@
t f(..., struct dma_attrs *attrs);
@@
identifier r.f;
@@
f(...,
- NULL
+ 0
)
Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm]
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp]
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core]
Acked-by: David Vrabel <david.vrabel@citrix.com> [xen]
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb]
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32]
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
c8d0267efd |
PCI changes for the v4.8 merge window:
Enumeration
Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
Add parent device field to ECAM struct pci_config_window (Jayachandran C)
Add generic MCFG table handling (Tomasz Nowicki)
Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)
Resource management
Add devm_request_pci_bus_resources() (Bjorn Helgaas)
Unify pci_resource_to_user() declarations (Bjorn Helgaas)
Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
Ignore write combining when mapping I/O port space (Bjorn Helgaas)
Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
Support I/O resources when parsing host bridge resources (Jayachandran C)
Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)
PCI device hotplug
Allow additional bus numbers for hotplug bridges (Keith Busch)
Ignore interrupts during D3cold (Lukas Wunner)
Power management
Enforce type casting for pci_power_t (Andy Shevchenko)
Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
Put PCIe ports into D3 during suspend (Mika Westerberg)
Power on bridges before scanning new devices (Mika Westerberg)
Runtime resume bridge before rescan (Mika Westerberg)
Add runtime PM support for PCIe ports (Mika Westerberg)
Remove redundant check of pcie_set_clkpm (Shawn Lin)
Virtualization
Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
Add ACS quirk for Solarflare SFC9220 (Edward Cree)
MSI
Fix PCI_MSI dependencies (Arnd Bergmann)
Add pci_msix_desc_addr() helper (Christoph Hellwig)
Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)
Error Handling
Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
Remove DPC tristate module option (Keith Busch)
Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)
Generic host bridge driver
Select IRQ_DOMAIN (Arnd Bergmann)
Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
ACPI host bridge driver
Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)
Altera host bridge driver
Check link status before retrain link (Ley Foon Tan)
Poll for link up status after retraining the link (Ley Foon Tan)
Axis ARTPEC-6 host bridge driver
Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)
Intel VMD host bridge driver
Use lock save/restore in interrupt enable path (Jon Derrick)
Select device dma ops to override (Keith Busch)
Initialize list item in IRQ disable (Keith Busch)
Use x86_vector_domain as parent domain (Keith Busch)
Separate MSI and MSI-X vector sharing (Keith Busch)
Marvell Aardvark host bridge driver
Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
Add Aardvark PCI host controller driver (Thomas Petazzoni)
Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)
Microsoft Hyper-V host bridge driver
Fix interrupt cleanup path (Cathy Avery)
Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
NVIDIA Tegra host bridge driver
Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
Use lower-case hex consistently for register definitions (Thierry Reding)
Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
Stop setting pcibios_min_mem (Thierry Reding)
Renesas R-Car host bridge driver
Drop gen2 dummy I/O port region (Bjorn Helgaas)
TI DRA7xx host bridge driver
Fix return value in case of error (Christophe JAILLET)
Xilinx AXI host bridge driver
Fix return value in case of error (Christophe JAILLET)
Miscellaneous
Make bus_attr_resource_alignment static (Ben Dooks)
Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
Make host bridge drivers explicitly non-modular (Paul Gortmaker)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NVxu
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Highlights:
- ARM64 support for ACPI host bridges
- new drivers for Axis ARTPEC-6 and Marvell Aardvark
- new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx
- pci_resource_to_user() cleanup (more to come)
Detailed summary:
Enumeration:
- Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
- Add parent device field to ECAM struct pci_config_window (Jayachandran C)
- Add generic MCFG table handling (Tomasz Nowicki)
- Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
- Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)
Resource management:
- Add devm_request_pci_bus_resources() (Bjorn Helgaas)
- Unify pci_resource_to_user() declarations (Bjorn Helgaas)
- Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
- Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
- Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
- Ignore write combining when mapping I/O port space (Bjorn Helgaas)
- Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
- Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
- Support I/O resources when parsing host bridge resources (Jayachandran C)
- Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
- Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
- Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
- Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
- Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
- Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
- Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
- Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)
PCI device hotplug:
- Allow additional bus numbers for hotplug bridges (Keith Busch)
- Ignore interrupts during D3cold (Lukas Wunner)
Power management:
- Enforce type casting for pci_power_t (Andy Shevchenko)
- Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
- Put PCIe ports into D3 during suspend (Mika Westerberg)
- Power on bridges before scanning new devices (Mika Westerberg)
- Runtime resume bridge before rescan (Mika Westerberg)
- Add runtime PM support for PCIe ports (Mika Westerberg)
- Remove redundant check of pcie_set_clkpm (Shawn Lin)
Virtualization:
- Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
- Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
- Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
- Add ACS quirk for Solarflare SFC9220 (Edward Cree)
MSI:
- Fix PCI_MSI dependencies (Arnd Bergmann)
- Add pci_msix_desc_addr() helper (Christoph Hellwig)
- Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
- Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
- Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
- Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)
Error Handling:
- Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
- Remove DPC tristate module option (Keith Busch)
- Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)
Generic host bridge driver:
- Select IRQ_DOMAIN (Arnd Bergmann)
- Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
ACPI host bridge driver:
- Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
- Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
- Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
- Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)
Altera host bridge driver:
- Check link status before retrain link (Ley Foon Tan)
- Poll for link up status after retraining the link (Ley Foon Tan)
Axis ARTPEC-6 host bridge driver:
- Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
- Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
- Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)
Intel VMD host bridge driver:
- Use lock save/restore in interrupt enable path (Jon Derrick)
- Select device dma ops to override (Keith Busch)
- Initialize list item in IRQ disable (Keith Busch)
- Use x86_vector_domain as parent domain (Keith Busch)
- Separate MSI and MSI-X vector sharing (Keith Busch)
Marvell Aardvark host bridge driver:
- Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
- Add Aardvark PCI host controller driver (Thomas Petazzoni)
- Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)
Microsoft Hyper-V host bridge driver:
- Fix interrupt cleanup path (Cathy Avery)
- Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
- Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
NVIDIA Tegra host bridge driver:
- Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
- Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
- Use lower-case hex consistently for register definitions (Thierry Reding)
- Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
- Stop setting pcibios_min_mem (Thierry Reding)
Renesas R-Car host bridge driver:
- Drop gen2 dummy I/O port region (Bjorn Helgaas)
TI DRA7xx host bridge driver:
- Fix return value in case of error (Christophe JAILLET)
Xilinx AXI host bridge driver:
- Fix return value in case of error (Christophe JAILLET)
Miscellaneous:
- Make bus_attr_resource_alignment static (Ben Dooks)
- Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
- MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
- Make host bridge drivers explicitly non-modular (Paul Gortmaker)"
* tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits)
PCI: xgene: Make explicitly non-modular
PCI: thunder-pem: Make explicitly non-modular
PCI: thunder-ecam: Make explicitly non-modular
PCI: tegra: Make explicitly non-modular
PCI: rcar-gen2: Make explicitly non-modular
PCI: rcar: Make explicitly non-modular
PCI: mvebu: Make explicitly non-modular
PCI: layerscape: Make explicitly non-modular
PCI: keystone: Make explicitly non-modular
PCI: hisi: Make explicitly non-modular
PCI: generic: Make explicitly non-modular
PCI: designware-plat: Make it explicitly non-modular
PCI: artpec6: Make explicitly non-modular
PCI: armada8k: Make explicitly non-modular
PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency
PCI: Add ACS quirk for Solarflare SFC9220
arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700
PCI: aardvark: Add Aardvark PCI host controller driver
dt-bindings: add DT binding for the Aardvark PCIe controller
PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values
...
|
||
|
Linus Torvalds
|
aeb35d6b74 |
Merge branch 'x86-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 header cleanups from Ingo Molnar: "This tree is a cleanup of the x86 tree reducing spurious uses of module.h - which should improve build performance a bit" * 'x86-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, crypto: Restore MODULE_LICENSE() to glue_helper.c so it loads x86/apic: Remove duplicated include from probe_64.c x86/ce4100: Remove duplicated include from ce4100.c x86/headers: Include spinlock_types.h in x8664_ksyms_64.c for missing spinlock_t x86/platform: Delete extraneous MODULE_* tags fromm ts5500 x86: Audit and remove any remaining unnecessary uses of module.h x86/kvm: Audit and remove any unnecessary uses of module.h x86/xen: Audit and remove any unnecessary uses of module.h x86/platform: Audit and remove any unnecessary uses of module.h x86/lib: Audit and remove any unnecessary uses of module.h x86/kernel: Audit and remove any unnecessary uses of module.h x86/mm: Audit and remove any unnecessary uses of module.h x86: Don't use module.h just for AUTHOR / LICENSE tags |
||
|
Bjorn Helgaas
|
a04bee8285 |
Merge branches 'pci/host-aardvark', 'pci/host-altera', 'pci/host-dra7xx', 'pci/host-hv', 'pci/host-vmd' and 'pci/host-xilinx' into next
* pci/host-aardvark: arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller * pci/host-altera: PCI: altera: Poll for link up status after retraining the link PCI: altera: Check link status before retrain link PCI: altera: Reorder read/write functions * pci/host-dra7xx: PCI: dra7xx: Fix return value in case of error * pci/host-hv: PCI: hv: Fix interrupt cleanup path PCI: hv: Handle all pending messages in hv_pci_onchannelcallback() PCI: hv: Don't leak buffer in hv_pci_onchannelcallback() * pci/host-vmd: x86/PCI: VMD: Separate MSI and MSI-X vector sharing x86/PCI: VMD: Use x86_vector_domain as parent domain x86/PCI: VMD: Use lock save/restore in interrupt enable path x86/PCI: VMD: Initialize list item in IRQ disable x86/PCI: VMD: Select device dma ops to override * pci/host-xilinx: PCI: xilinx: Fix return value in case of error Manually apply changes from pci/demodularize-hosts and pci/host-request-windows to drivers/pci/host/pci-aardvark.c |
||
|
Linus Torvalds
|
e65805251f |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The irq department delivers:
- new core infrastructure to allow better management of multi-queue
devices (interrupt spreading, node aware descriptor allocation ...)
- a new interrupt flow handler to support the new fangled Intel VMD
devices.
- yet another new interrupt controller driver.
- a series of fixes which addresses sparse warnings, missing
includes, missing static declarations etc from Ben Dooks.
- a fix for the error handling in the hierarchical domain allocation
code.
- the usual pile of small updates to core and driver code"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
genirq: Fix missing irq allocation affinity hint
irqdomain: Fix irq_domain_alloc_irqs_recursive() error handling
irq/Documentation: Correct result of echnoing 5 to smp_affinity
MAINTAINERS: Remove Jiang Liu from irq domains
genirq/msi: Fix broken debug output
genirq: Add a helper to spread an affinity mask for MSI/MSI-X vectors
genirq/msi: Make use of affinity aware allocations
genirq: Use affinity hint in irqdesc allocation
genirq: Add affinity hint to irq allocation
genirq: Introduce IRQD_AFFINITY_MANAGED flag
genirq/msi: Remove unused MSI_FLAG_IDENTITY_MAP
irqchip/s3c24xx: Fixup IO accessors for big endian
irqchip/exynos-combiner: Fix usage of __raw IO
irqdomain: Fix disposal of mappings for interrupt hierarchies
irqchip/aspeed-vic: Add irq controller for Aspeed
doc/devicetree: Add Aspeed VIC bindings
x86/PCI/VMD: Use untracked irq handler
genirq: Add untracked irq handler
irqchip/mips-gic: Populate irq_domain names
irqchip/gicv3-its: Implement two-level(indirect) device table support
...
|
||
|
Linus Torvalds
|
8e466955d6 |
Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar: "The main changes in this cycle were: - Intel-SoC enhancements (Andy Shevchenko) - Intel CPU symbolic model definition rework (Dave Hansen) - ... other misc changes" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) x86/sfi: Enable enumeration of SD devices x86/pci: Use MRFLD abbreviation for Merrifield x86/platform/intel-mid: Make vertical indentation consistent x86/platform/intel-mid: Mark regulators explicitly defined x86/platform/intel-mid: Rename mrfl.c to mrfld.c x86/platform/intel-mid: Enable spidev on Intel Edison boards x86/platform/intel-mid: Extend PWRMU to support Penwell x86/pci, x86/platform/intel_mid_pci: Remove duplicate power off code x86/platform/intel-mid: Add pinctrl for Intel Merrifield x86/platform/intel-mid: Enable GPIO expanders on Edison x86/platform/intel-mid: Add Power Management Unit driver x86/platform/atom/punit: Enable support for Merrifield x86/platform/intel_mid_pci: Rework IRQ0 workaround x86, thermal: Clean up and fix CPU model detection for intel_soc_dts_thermal x86, mmc: Use Intel family name macros for mmc driver x86/intel_telemetry: Use Intel family name macros for telemetry driver x86/acpi/lss: Use Intel family name macros for the acpi_lpss driver x86/cpufreq: Use Intel family name macros for the intel_pstate cpufreq driver x86/platform: Use new Intel model number macros x86/intel_idle: Use Intel family macros for intel_idle ... |
||
Paul Gortmaker
|
eb008eb6f8 |
x86: Audit and remove any remaining unnecessary uses of module.h
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some of these which are modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace as needed. In the case of crypto/glue_helper.c we delete a redundant instance of MODULE_LICENSE in order to delete module.h -- the license info is already present at the top of the file. The uncore change warrants a mention too; it is uncore.c that uses module.h and not uncore.h; hence the relocation done there. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160714001901.31603-9-paul.gortmaker@windriver.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
8b3843996d |
Merge branch 'x86/platform' into x86/headers, to apply dependent patches
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Andy Shevchenko
|
707a605b5a |
x86/pci: Use MRFLD abbreviation for Merrifield
Everywhere in the kernel the MRFLD is used as abbreviation of Intel Merrifield. Do the same in intel_mid_pci.c module. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1468321462-136016-1-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Andy Shevchenko
|
e99a0745bd |
x86/pci, x86/platform/intel_mid_pci: Remove duplicate power off code
Intel MID platforms (Moorestown, Medfield, Clovertrail, Merrifield) are
sharing the code in the intel_mid_pci.c module. There is no need to
power off specific Moorestown devices after the following commit:
|
||
Sinan Kaya
|
487cf917ed |
Revert "ACPI, PCI, IRQ: remove redundant code in acpi_irq_penalty_init()"
Trying to make the ISA and PCI init functionality common turned out
to be a bad idea, because the ISA path depends on external
functionality.
Restore the previous behavior and limit the refactoring to PCI
interrupts only.
Fixes:
|
||
|
Keith Busch
|
9c2053040c |
x86/PCI: VMD: Separate MSI and MSI-X vector sharing
Child devices in a VMD domain that want to use MSI are slowing down MSI-X using devices sharing the same vectors. Move all MSI usage to a single VMD vector, and MSI-X devices can share the rest. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jon Derrick <jonathan.derrick@intel.com> |
||
|
Keith Busch
|
e382dffc90 |
x86/PCI: VMD: Use x86_vector_domain as parent domain
Otherwise APIC code assumes VMD's IRQ domain can be managed by the APIC, resulting in an invalid cast of irq_data during irq_force_complete_move(). Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Jon Derrick
|
3f57ff4f9c |
x86/PCI: VMD: Use lock save/restore in interrupt enable path
Enabling interrupts may result in an interrupt raised and serviced while VMD holds a lock, resulting in contention with the spin lock held while enabling interrupts. The solution is to disable preemption and save/restore the state during interrupt enable and disable. Fixes lockdep: ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.6.0-2016-06-16-lockdep+ #47 Tainted: G E ------------------------------------------------------ kworker/0:1/447 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (list_lock){+.+...}, at: [<ffffffffa04eb8fc>] vmd_irq_enable+0x3c/0x70 [vmd] and this task is already holding: (&irq_desc_lock_class){-.-...}, at: [<ffffffff810e1ff6>] __setup_irq+0xa6/0x610 which would create a new lock dependency: (&irq_desc_lock_class){-.-...} -> (list_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&irq_desc_lock_class){-.-...} ... which became HARDIRQ-irq-safe at: [<ffffffff810c9f21>] __lock_acquire+0x981/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffff810e36d4>] handle_level_irq+0x24/0x110 [<ffffffff8101f20a>] handle_irq+0x1a/0x30 [<ffffffff81675fc1>] do_IRQ+0x61/0x120 [<ffffffff8167404c>] ret_from_intr+0x0/0x20 [<ffffffff81672e30>] _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffff810e21ee>] __setup_irq+0x29e/0x610 [<ffffffff810e25a1>] setup_irq+0x41/0x90 [<ffffffff81f5777f>] setup_default_timer_irq+0x1e/0x20 [<ffffffff81f57798>] hpet_time_init+0x17/0x19 [<ffffffff81f5775a>] x86_late_time_init+0xa/0x11 [<ffffffff81f51e9b>] start_kernel+0x382/0x436 [<ffffffff81f51308>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f51445>] x86_64_start_kernel+0x13b/0x14a to a HARDIRQ-irq-unsafe lock: (list_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<ffffffff810c9d8e>] __lock_acquire+0x7ee/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffffa04eba42>] vmd_msi_init+0x72/0x150 [vmd] [<ffffffff810e8597>] msi_domain_alloc+0xb7/0x140 [<ffffffff810e6b10>] irq_domain_alloc_irqs_recursive+0x40/0xa0 [<ffffffff810e6cea>] __irq_domain_alloc_irqs+0x14a/0x330 [<ffffffff810e8a8c>] msi_domain_alloc_irqs+0x8c/0x1d0 [<ffffffff813ca4e3>] pci_msi_setup_msi_irqs+0x43/0x70 [<ffffffff813cada1>] pci_enable_msi_range+0x131/0x280 [<ffffffff813bf5e0>] pcie_port_device_register+0x320/0x4e0 [<ffffffff813bf9a4>] pcie_portdrv_probe+0x34/0x60 [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff813b226b>] pci_device_probe+0xdb/0x130 [<ffffffff8149e3cc>] driver_probe_device+0x22c/0x440 [<ffffffff8149e774>] __device_attach_driver+0x94/0x110 [<ffffffff8149bfad>] bus_for_each_drv+0x5d/0x90 [<ffffffff8149e030>] __device_attach+0xc0/0x140 [<ffffffff8149e0c0>] device_attach+0x10/0x20 [<ffffffff813a77f7>] pci_bus_add_device+0x47/0x90 [<ffffffff813a7879>] pci_bus_add_devices+0x39/0x70 [<ffffffff813aaba7>] pci_rescan_bus+0x27/0x30 [<ffffffffa04ec1af>] vmd_probe+0x68f/0x76c [vmd] [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff81088064>] work_for_cpu_fn+0x14/0x20 [<ffffffff8108c244>] process_one_work+0x1f4/0x740 [<ffffffff8108c9c6>] worker_thread+0x236/0x4f0 [<ffffffff810935c2>] kthread+0xf2/0x110 [<ffffffff816738f2>] ret_from_fork+0x22/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(list_lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(list_lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com> |
||
|
Keith Busch
|
30ce035038 |
x86/PCI/VMD: Use untracked irq handler
There is no way to know which device in a VMD triggered an interrupt without invoking every registered driver's actions. This uses the untracked irq handler so that a less used device does not trigger spurious interrupt. We have been previously recommending users to enable "noirqdebug", but do not want to force a system setting just to keep this domain functional. Signed-off-by: Keith Busch <keith.busch@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Cc: Jon Derrick <jonathan.derrick@intel.com> Link: http://lkml.kernel.org/r/1466200821-29159-2-git-send-email-keith.busch@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
|
Andy Shevchenko
|
5823d0893e |
x86/platform/intel-mid: Add Power Management Unit driver
Add Power Management Unit driver to handle power states of South Complex devices on Intel Tangier. In the future it might be expanded to cover North Complex devices as well. With this driver the power state of the host controllers such as SPI, I2C, UART, eMMC, and DMA would be managed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1465928985-12113-1-git-send-email-andriy.shevchenko@linux.intel.com [ Minor readability edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Andy Shevchenko
|
bb27570525 |
x86/platform/intel_mid_pci: Rework IRQ0 workaround
On Intel Merrifield platform several PCI devices have a bogus configuration,
i.e. the IRQ0 had been assigned to few of them. These are PCI root bridge,
eMMC0, HS UART common registers, PWM, and HDMI. The actual interrupt line can
be allocated to one device exclusively, in our case to eMMC0, the rest should
cope without it and basically known drivers for them are not using interrupt
line at all.
Rework IRQ0 workaround, which was previously done to avoid conflict between
eMMC0 and HS UART common registers, to behave differently based on the device
in question, i.e. allocate interrupt line to eMMC0, but silently skip interrupt
allocation for the rest except HS UART common registers which are not used
anyway. With this rework IOSF MBI driver in particular would be used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes:
|
||
|
Keith Busch
|
97e9230635 |
x86/PCI: VMD: Initialize list item in IRQ disable
Multiple calls to disable an IRQ would have caused the driver to dereference a poisoned list item. This re-initializes the list to allow multiple requests to disable the IRQ. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com> |
||
|
Keith Busch
|
ca8a8fabb1 |
x86/PCI: VMD: Select device dma ops to override
VMD device doesn't usually have device archdata specific dma_ops, so we need to override the default ops for VMD devices. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com> |
||
Andrea Gelmini
|
386ed2ab85 |
PCI: Fix comment typo
Fix typo. Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
|
Linus Torvalds
|
29567292c0 |
xen: bug fixes for 4.7-rc0
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJXRGqXAAoJEFxbo/MsZsTRSr8H/AwybQygAqBPoxsC2VkdSD0u csHnXuG/37ABep55A0ZgNIwq/JNK1m7K0+Xq6S6pO6UTH8gl32Fx2uPiHoXEdzmK KfwQPx8ETaVtOSrzPJdPdspXTNngEsvopTPGPRKG6VNE3JwtTiwkHcXiez6nJ8XB 2YqGjYOdKNsu/sAUo5aCrc7eCcdCu/hc6pWFNtfSBRSLhR1Eofl81B6B0BCvi5D0 5/TOX+YnZ4omNeYlxghFvZKa/HyfE/0CONbyijjVoLcd8i2EptNosdCc9WgRTOAZ nwnsABYg0izPZYNgr5HJUwfNLnVymtg8gg7b2WpKkM0Xvd7uPjrYA1vpHh1yA48= =OfVJ -----END PGP SIGNATURE----- Merge tag 'for-linus-4.7-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel. * tag 'for-linus-4.7-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: use same main loop for counting and remapping pages xen/events: Don't move disabled irqs xen/x86: actually allocate legacy interrupts on PV guests Xen: don't warn about 2-byte wchar_t in efi xen/gntdev: reduce copy batch size to 16 xen/x86: don't lose event interrupts |
||
Stefano Stabellini
|
702f926067 |
xen/x86: actually allocate legacy interrupts on PV guests
|
||
|
Linus Torvalds
|
7afd16f882 |
PCI changes for the v4.7 merge window:
Enumeration
Refine PCI support check in pcibios_init() (Adrian-Ken Rueegsegger)
Provide common functions for ECAM mapping (Jayachandran C)
Allow all PCIe services on non-ACPI host bridges (Jon Derrick)
Remove return values from pcie_port_platform_notify() and relatives (Jon Derrick)
Widen portdrv service type from 4 bits to 8 bits (Keith Busch)
Add Downstream Port Containment portdrv service type (Keith Busch)
Add Downstream Port Containment driver (Keith Busch)
Resource management
Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs (Alex Williamson)
Supply CPU physical address (not bus address) to iomem_is_exclusive() (Bjorn Helgaas)
alpha: Call iomem_is_exclusive() for IORESOURCE_MEM, but not IORESOURCE_IO (Bjorn Helgaas)
Mark Broadwell-EP Home Agent 1 as having non-compliant BARs (Prarit Bhargava)
Disable all BAR sizing for devices with non-compliant BARs (Prarit Bhargava)
Move PCI I/O space management from OF to PCI core code (Tomasz Nowicki)
PCI device hotplug
acpiphp_ibm: Avoid uninitialized variable reference (Dan Carpenter)
Use cached copy of PCI_EXP_SLTCAP_HPC bit (Lukas Wunner)
Virtualization
Mark Intel i40e NIC INTx masking as broken (Alex Williamson)
Reverse standard ACS vs device-specific ACS enabling (Alex Williamson)
Work around Intel Sunrise Point PCH incorrect ACS capability (Alex Williamson)
IOMMU
Add pci_add_dma_alias() to abstract implementation (Bjorn Helgaas)
Move informational printk to pci_add_dma_alias() (Bjorn Helgaas)
Add support for multiple DMA aliases (Jacek Lawrynowicz)
Add DMA alias quirk for mic_x200_dma (Jacek Lawrynowicz)
Thunderbolt
Fix double free of drom buffer (Andreas Noever)
Add Intel Thunderbolt device IDs (Lukas Wunner)
Fix typos and magic number (Lukas Wunner)
Support 1st gen Light Ridge controller (Lukas Wunner)
Generic host bridge driver
Use generic ECAM API (Jayachandran C)
Cavium ThunderX host bridge driver
Don't clobber read-only bits in bridge config registers (David Daney)
Use generic ECAM API (Jayachandran C)
Freescale i.MX6 host bridge driver
Use enum instead of bool for variant indicator (Andrey Smirnov)
Implement reset sequence for i.MX6+ (Andrey Smirnov)
Factor out ref clock enable (Bjorn Helgaas)
Add initial imx6sx support (Christoph Fritz)
Add reset-gpio-active-high boolean property to DT (Petr Štetiar)
Add DT property for link gen, default to Gen1 (Tim Harvey)
dts: Specify imx6qp version of PCIe core (Andrey Smirnov)
dts: Fix PCIe reset GPIO polarity on Toradex Apalis Ixora (Petr Štetiar)
Marvell Armada host bridge driver
add DT binding for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
Add driver for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
Marvell MVEBU host bridge driver
Constify mvebu_pcie_pm_ops structure (Jisheng Zhang)
Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS for mvebu_pcie_pm_ops (Jisheng Zhang)
Microsoft Hyper-V host bridge driver
Report resources release after stopping the bus (Vitaly Kuznetsov)
Add explicit barriers to config space access (Vitaly Kuznetsov)
Renesas R-Car host bridge driver
Select PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)
Synopsys DesignWare host bridge driver
Remove incorrect RC memory base/limit configuration (Gabriele Paoloni)
Move Root Complex setup code to dw_pcie_setup_rc() (Jisheng Zhang)
TI Keystone host bridge driver
Add error IRQ handler (Murali Karicheri)
Remove unnecessary goto statement (Murali Karicheri)
Miscellaneous
Fix spelling errors (Colin Ian King)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=68Iz
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Refine PCI support check in pcibios_init() (Adrian-Ken Rueegsegger)
- Provide common functions for ECAM mapping (Jayachandran C)
- Allow all PCIe services on non-ACPI host bridges (Jon Derrick)
- Remove return values from pcie_port_platform_notify() and relatives (Jon Derrick)
- Widen portdrv service type from 4 bits to 8 bits (Keith Busch)
- Add Downstream Port Containment portdrv service type (Keith Busch)
- Add Downstream Port Containment driver (Keith Busch)
Resource management:
- Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs (Alex Williamson)
- Supply CPU physical address (not bus address) to iomem_is_exclusive() (Bjorn Helgaas)
- alpha: Call iomem_is_exclusive() for IORESOURCE_MEM, but not IORESOURCE_IO (Bjorn Helgaas)
- Mark Broadwell-EP Home Agent 1 as having non-compliant BARs (Prarit Bhargava)
- Disable all BAR sizing for devices with non-compliant BARs (Prarit Bhargava)
- Move PCI I/O space management from OF to PCI core code (Tomasz Nowicki)
PCI device hotplug:
- acpiphp_ibm: Avoid uninitialized variable reference (Dan Carpenter)
- Use cached copy of PCI_EXP_SLTCAP_HPC bit (Lukas Wunner)
Virtualization:
- Mark Intel i40e NIC INTx masking as broken (Alex Williamson)
- Reverse standard ACS vs device-specific ACS enabling (Alex Williamson)
- Work around Intel Sunrise Point PCH incorrect ACS capability (Alex Williamson)
IOMMU:
- Add pci_add_dma_alias() to abstract implementation (Bjorn Helgaas)
- Move informational printk to pci_add_dma_alias() (Bjorn Helgaas)
- Add support for multiple DMA aliases (Jacek Lawrynowicz)
- Add DMA alias quirk for mic_x200_dma (Jacek Lawrynowicz)
Thunderbolt:
- Fix double free of drom buffer (Andreas Noever)
- Add Intel Thunderbolt device IDs (Lukas Wunner)
- Fix typos and magic number (Lukas Wunner)
- Support 1st gen Light Ridge controller (Lukas Wunner)
Generic host bridge driver:
- Use generic ECAM API (Jayachandran C)
Cavium ThunderX host bridge driver:
- Don't clobber read-only bits in bridge config registers (David Daney)
- Use generic ECAM API (Jayachandran C)
Freescale i.MX6 host bridge driver:
- Use enum instead of bool for variant indicator (Andrey Smirnov)
- Implement reset sequence for i.MX6+ (Andrey Smirnov)
- Factor out ref clock enable (Bjorn Helgaas)
- Add initial imx6sx support (Christoph Fritz)
- Add reset-gpio-active-high boolean property to DT (Petr Štetiar)
- Add DT property for link gen, default to Gen1 (Tim Harvey)
- dts: Specify imx6qp version of PCIe core (Andrey Smirnov)
- dts: Fix PCIe reset GPIO polarity on Toradex Apalis Ixora (Petr Štetiar)
Marvell Armada host bridge driver:
- add DT binding for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
- Add driver for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni)
Marvell MVEBU host bridge driver:
- Constify mvebu_pcie_pm_ops structure (Jisheng Zhang)
- Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS for mvebu_pcie_pm_ops (Jisheng Zhang)
Microsoft Hyper-V host bridge driver:
- Report resources release after stopping the bus (Vitaly Kuznetsov)
- Add explicit barriers to config space access (Vitaly Kuznetsov)
Renesas R-Car host bridge driver:
- Select PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)
Synopsys DesignWare host bridge driver:
- Remove incorrect RC memory base/limit configuration (Gabriele Paoloni)
- Move Root Complex setup code to dw_pcie_setup_rc() (Jisheng Zhang)
TI Keystone host bridge driver:
- Add error IRQ handler (Murali Karicheri)
- Remove unnecessary goto statement (Murali Karicheri)
Miscellaneous:
- Fix spelling errors (Colin Ian King)"
* tag 'pci-v4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits)
PCI: Disable all BAR sizing for devices with non-compliant BARs
x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs
PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs
PCI, of: Move PCI I/O space management to PCI core code
PCI: generic, thunder: Use generic ECAM API
PCI: Provide common functions for ECAM mapping
PCI: hv: Add explicit barriers to config space access
PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit
PCI: Add Downstream Port Containment driver
PCI: Add Downstream Port Containment portdrv service type
PCI: Widen portdrv service type from 4 bits to 8 bits
PCI: designware: Remove incorrect RC memory base/limit configuration
PCI: hv: Report resources release after stopping the bus
ARM: dts: imx6qp: Specify imx6qp version of PCIe core
PCI: imx6: Implement reset sequence for i.MX6+
PCI: imx6: Use enum instead of bool for variant indicator
PCI: thunder: Don't clobber read-only bits in bridge config registers
thunderbolt: Fix double free of drom buffer
PCI: rcar: Select PCI_MSI_IRQ_DOMAIN
PCI: armada: Add driver for Marvell Armada 7K/8K PCIe controller
...
|
||
|
Bjorn Helgaas
|
45604e68ed |
Merge branches 'pci/hotplug' and 'pci/resource' into next
* pci/hotplug: PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit * pci/resource: PCI: Disable all BAR sizing for devices with non-compliant BARs x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs |
||
|
Linus Torvalds
|
46c1345062 |
ACPI material for v4.7-rc1
- In-kernel ACPICA code update to the upstream release 20160422
adding support for ACPI 6.1 along with some previously missing
bits of ACPI 6.0 support, making a fair amount of fixes and
cleanups and reducing divergences between the upstream ACPICA
and the in-kernel code (Bob Moore, Lv Zheng, Al Stone, Aleksey
Makarov, Will Miles).
- ACPI Generic Event Device (GED) support and a fix for it (Sinan Kaya,
Paul Gortmaker).
- INT3406 thermal driver for display thermal management and ACPI
backlight support code reorganization related to it (Aaron Lu,
Arnd Bergmann).
- Support for exporting the value returned by the _HRV (hardware
revision) ACPI object via sysfs (Betty Dall).
- Removal of the EXPERT dependency for ACPI on ARM64 (Mark Brown).
- Rework of the handling of ACPI _OSI mechanism allowing the
_OSI("Darwin") support to be overridden from the kernel command
line among other things (Lv Zheng, Chen Yu).
- Rework of the ACPI tables override mechanism to prepare it for
the introduction of overlays support going forward (Lv Zheng,
Rafael Wysocki).
- Fixes related to the ECDT support and module-level execution
of AML (Lv Zheng).
- ACPI PCI interrupts management update to make it work better on
ARM64 mostly (Sinan Kaya).
- ACPI SRAT handling update to make the code process all entires
in the table order regardless of the entry type (Lukasz Anaczkowski).
- EFI power off support for full-hardware ACPI platforms that don't
support ACPI S5 (Chen Yu).
- Fixes and cleanups related to the ACPI core's sysfs interface
(Dan Carpenter, Betty Dall).
- acpi_dev_present() API rework to reduce possible confusion related
to it (Lukas Wunner).
- Removal of CLK_IS_ROOT from two ACPI drivers (Stephen Boyd).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=rAwm
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"The new features here are ACPI 6.1 support (and some previously
missing bits of ACPI 6.0 support) in ACPICA and two new drivers, a
driver for the ACPI Generic Event Device (GED) feature introduced by
ACPI 6.1 and the INT3406 thermal driver for display thermal
management. Also the value returned by the _HRV (hardware revision)
ACPI object will be exported to user space via sysfs now.
In addition to that, ACPI on ARM64 will not depend on EXPERT any more.
The rest is mostly fixes and cleanups and some code reorganization.
Specifics:
- In-kernel ACPICA code update to the upstream release 20160422
adding support for ACPI 6.1 along with some previously missing bits
of ACPI 6.0 support, making a fair amount of fixes and cleanups and
reducing divergences between the upstream ACPICA and the in-kernel
code (Bob Moore, Lv Zheng, Al Stone, Aleksey Makarov, Will Miles)
- ACPI Generic Event Device (GED) support and a fix for it (Sinan
Kaya, Paul Gortmaker)
- INT3406 thermal driver for display thermal management and ACPI
backlight support code reorganization related to it (Aaron Lu, Arnd
Bergmann)
- Support for exporting the value returned by the _HRV (hardware
revision) ACPI object via sysfs (Betty Dall)
- Removal of the EXPERT dependency for ACPI on ARM64 (Mark Brown)
- Rework of the handling of ACPI _OSI mechanism allowing the
_OSI("Darwin") support to be overridden from the kernel command
line among other things (Lv Zheng, Chen Yu)
- Rework of the ACPI tables override mechanism to prepare it for the
introduction of overlays support going forward (Lv Zheng, Rafael
Wysocki)
- Fixes related to the ECDT support and module-level execution of AML
(Lv Zheng)
- ACPI PCI interrupts management update to make it work better on
ARM64 mostly (Sinan Kaya)
- ACPI SRAT handling update to make the code process all entires in
the table order regardless of the entry type (Lukasz Anaczkowski)
- EFI power off support for full-hardware ACPI platforms that don't
support ACPI S5 (Chen Yu)
- Fixes and cleanups related to the ACPI core's sysfs interface (Dan
Carpenter, Betty Dall)
- acpi_dev_present() API rework to reduce possible confusion related
to it (Lukas Wunner)
- Removal of CLK_IS_ROOT from two ACPI drivers (Stephen Boyd)"
* tag 'acpi-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (82 commits)
ACPI / video: mark acpi_video_get_levels() inline
Thermal / ACPI / video: add INT3406 thermal driver
ACPI / GED: make evged.c explicitly non-modular
ACPI / tables: Fix DSDT override mechanism
ACPI / sysfs: fix error code in get_status()
ACPICA: Update version to 20160422
ACPICA: Move all ASCII utilities to a common file
ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write()
ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support in acpi_hw_read()
ACPICA: Executer: Introduce a set of macros to handle bit width mask generation
ACPICA: Hardware: Add optimized access bit width support
ACPICA: Utilities: Add ACPI_IS_ALIGNED() macro
ACPICA: Renamed some #defined flag constants for clarity
ACPICA: ACPI 6.0, tools/iasl: Add support for new resource descriptors
ACPICA: ACPI 6.0: Update _BIX support for new package element
ACPICA: ACPI 6.1: Support for new PCCT subtable
ACPICA: Refactor evaluate_object to reduce nesting
ACPICA: Divergence: remove unwanted spaces for typedef
ACPI,PCI,IRQ: remove SCI penalize function
ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init()
..
|
||
Prarit Bhargava
|
da77b67195 |
x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs
Commit |
||
|
Sinan Kaya
|
1fcb6a813c |
ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init()
acpi_irq_get_penalty is now calculating the penalty on the fly now. No need to maintain global list of penalties or calculate them at the init time. Removing duplicate code in acpi_irq_penalty_init. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Borislav Petkov
|
93984fbd4e |
x86/cpufeature: Replace cpu_has_apic with boot_cpu_has() usage
Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: iommu@lists.linux-foundation.org Cc: linux-pm@vger.kernel.org Cc: oprofile-list@lists.sf.net Link: http://lkml.kernel.org/r/1459801503-15600-8-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Adrian-Ken Rueegsegger
|
35a6ae07c6 |
x86/PCI: Refine PCI support check in pcibios_init()
Also consider raw_pci_ext_ops when validating if a system has PCI support. This leads to proper resource allocation via pcibios_resource_survey() in the case where PCI config space is exclusively accessed through MMCONFIG. Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |