Commit Graph

2048 Commits

Author SHA1 Message Date
Linus Torvalds
0534c8cb5c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Add support for new SFP+ PHY
  RDMA/nes: Add wide_ppm_offset parm for switch compatibility
  RDMA/nes: Fix SFP+ PHY initialization
  RDMA/nes: Fix nes_nic_cm_xmit() error handling
  RDMA/nes: Fix error handling issues
  RDMA/nes: Fix incorrect casts on 32-bit architectures
  IPoIB: Document newish features
  RDMA/cma: Create cm id even when IB port is down
  RDMA/cma: Use rate from IPoIB broadcast when joining IPoIB multicast groups
  IPoIB: Avoid free_netdev() BUG when destroying a child interface
  mlx4_core: Don't leak mailbox for SET_PORT on Ethernet ports
  RDMA/cxgb3: Release dependent resources only when endpoint memory is freed.
  RDMA/cxgb3: Handle EEH events
  IB/mlx4: Use pgprot_writecombine() for BlueFlame pages
2009-04-09 16:42:26 -07:00
Roland Dreier
07306c0b98 Merge branches 'cma', 'cxgb3', 'ipoib', 'mlx4' and 'nes' into for-next 2009-04-08 14:28:21 -07:00
Chien Tung
4303565df4 RDMA/nes: Add support for new SFP+ PHY
Add new register settings for new SFP+ PHY/firmware.
Add new PHY to to nes_netdev_get/set_settings.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-08 14:27:56 -07:00
Chien Tung
a4849fc157 RDMA/nes: Add wide_ppm_offset parm for switch compatibility
We have observed unstable link with a new BNT switch.

Add wide_ppm_offset parameter to allow the user to control the clock
ppm offset on the CX4 interface for better compatibility.  Default is
100ppm, setting it to 1 will increase it to 300ppm.  Change default
SerDes1 reference clock to external source.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-08 14:27:18 -07:00
Chien Tung
1b9493248c RDMA/nes: Fix SFP+ PHY initialization
SFP+ PHY initialization has very long delays, incorrect settings for
direct attach copper cables, and inconsistent link detection.

Adjust delays to the minimum required by the PHY.  Worst case is now
less than 4 seconds.  Add new register settings for direct attach
cables.  Change link detection logic to use two new registers for more
consistent link state detection.  Reorganize code to shorten line
length.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-08 14:27:09 -07:00
Faisal Latif
5962c2c803 RDMA/nes: Fix nes_nic_cm_xmit() error handling
We are getting crash or hung situation when we are running network
cable pull tests during RDMA traffic.

In schedule_nes_timer(), we return an error if nes_nic_cm_xmit()
returns failure.  This is changed to success as skb is being put on
the timer routines to be processed later.  In send_syn() case, we are
indicating connect failure once from nes_connect() and the other when
the rexmit retries expires.

The other issue is skb->users which we are incrementing before calling
nes_nic_cm_xmit() which calls dev_queue_xmit() but in case of failure
we are decrementing the skb->users at the same time putting the skb on
the rexmit path.  Even if dev_queue_xmit() fails, the skb->users is
decremented already.  We are removing the decrement of skb->users in
case of failure from both schedule_nes_timer() as well as from
nes_cm_timer_tick().

There is also extra check in nes_cm_timer_tick() for rexmit failure
which does a break from the loop is removed.  This causes problem as
the other nodes have their cm_node->ref_count incremented and are not
processed.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-08 14:23:55 -07:00
Faisal Latif
79fc3d7410 RDMA/nes: Fix error handling issues
Fix issues found by static code analysis:

(1) Check if cm_node was successfully created for loopback connection.

(2) schedule_nes_timer() does not free up allocated memory after
    encountering an error.  There is a WARN_ON() for this condition.

(3) there is a cm_node->freed flag which is set but not used.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-08 14:22:20 -07:00
Don Wood
7a5efb62f6 RDMA/nes: Fix incorrect casts on 32-bit architectures
The were some incorrect casts to unsigned long that caused 64-bit values
to be truncated on 32-bit architectures and made the driver pass invalid
adresses and lengths to the hardware.  The problems were primarily seen
with kernels with highmem configured but some could show up in
non-highmem kernels, too.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-08 14:21:02 -07:00
Yossi Etigin
d2ca39f262 RDMA/cma: Create cm id even when IB port is down
When doing rdma_resolve_addr(), if the relevant IB port is down, the
function fails and the cm_id is not bound to the correct device.
Therefore, application does not have a device handle and cannot wait
for the port to become active.  The function fails because the
underlying IPoIB interface is not joined to the broadcast group and
therefore the SA does not have a multicast record to take a Q_Key
from.

The fix is to use lazy Q_Key resolution - cma_set_qkey() will set
id_priv->qkey if it was not set, and will be called just before the
Q_Key is really required.

Signed-off-by: Yossi Etigin <yosefe@voltaire.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-08 13:42:33 -07:00
Yang Hongyang
284901a90a dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:11 -07:00
Yang Hongyang
6a35528a83 dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:10 -07:00
Yossi Etigin
84adeee9aa RDMA/cma: Use rate from IPoIB broadcast when joining IPoIB multicast groups
When joining an IPoIB multicast group, use the same rate as in the
broadcast group.  Otherwise, if the RDMA CM creates this group before
IPoIB does, it might get a different rate.  This will cause IPoIB to
fail joining to the same group later on, because IPoIB uses strict
rate selection.

Signed-off-by: Yossi Etigin <yosefe@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-01 13:55:32 -07:00
Roland Dreier
edb5abb1e2 IPoIB: Avoid free_netdev() BUG when destroying a child interface
We have to release the RTNL before calling free_netdev() so that the
device state has a chance to become NETREG_UNREGISTERED.  Otherwise
when removing a child interface, we hit the BUG() that tests the
device state in free_netdev().

Reported-by: Yossi Etigin <yosefe@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-31 10:22:32 -07:00
Steve Wise
874d8df5ed RDMA/cxgb3: Release dependent resources only when endpoint memory is freed.
The cxgb3 l2t entry, hwtid, and dst entry were being released before
all the iwch_ep references were released.  This can cause a crash in
t3_l2t_send_slow() and other places where the l2t entry is used.

The fix is to defer releasing these resources until all endpoint
references are gone.

Details:

- move flags field to the iwch_ep_common struct.
- add a flag indicating resources are to be released.
- release resources at endpoint free time instead of close/abort time.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-30 08:37:59 -07:00
Steve Wise
04b5d028f5 RDMA/cxgb3: Handle EEH events
- wrap calls into cxgb3 and fail them if we're in the middle
  of a PCI EEH event.

- correctly unwind and release endpoint and other resources when
  we are in an EEH event.

- dispatch IB_EVENT_DEVICE_FATAL event when cxgb3 notifies iw_cxgb3 of
  a fatal error.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-30 08:37:56 -07:00
Roland Dreier
e1d60ec669 IB/mlx4: Use pgprot_writecombine() for BlueFlame pages
The PAT work on x86 has finally made pgprot_writecombine() a usable API
for modular drivers.  As the comment indicates, this is exactly what we
want to use in mlx4_ib to map BlueFlame pages up to userspace, since
using WC for these pages improves small message latency significantly.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-30 08:31:05 -07:00
Linus Torvalds
d54b3538b0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (119 commits)
  [SCSI] scsi_dh_rdac: Retry for NOT_READY check condition
  [SCSI] mpt2sas: make global symbols unique
  [SCSI] sd: Make revalidate less chatty
  [SCSI] sd: Try READ CAPACITY 16 first for SBC-2 devices
  [SCSI] sd: Refactor sd_read_capacity()
  [SCSI] mpt2sas v00.100.11.15
  [SCSI] mpt2sas: add MPT2SAS_MINOR(221) to miscdevice.h
  [SCSI] ch: Add scsi type modalias
  [SCSI] 3w-9xxx: add power management support
  [SCSI] bsg: add linux/types.h include to bsg.h
  [SCSI] cxgb3i: fix function descriptions
  [SCSI] libiscsi: fix possbile null ptr session command cleanup
  [SCSI] iscsi class: remove host no argument from session creation callout
  [SCSI] libiscsi: pass session failure a session struct
  [SCSI] iscsi lib: remove qdepth param from iscsi host allocation
  [SCSI] iscsi lib: have lib create work queue for transmitting IO
  [SCSI] iscsi class: fix lock dep warning on logout
  [SCSI] libiscsi: don't cap queue depth in iscsi modules
  [SCSI] iscsi_tcp: replace scsi_debug/tcp_debug logging with iscsi conn logging
  [SCSI] libiscsi_tcp: replace tcp_debug/scsi_debug logging with session/conn logging
  ...
2009-03-28 13:30:43 -07:00
Roland Dreier
7c757eb9f8 RDMA/nes: Fix mis-merge
When net-next and infiniband were merged upstream, each branch deleted
one of a pair of adjacent lines from nes_nic.c, but when Linus fixed the
conflict up, he brought back both of the lines.  Fix up to the intended
final tree state.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-26 17:00:25 -07:00
Linus Torvalds
6671de344c Merge branch 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (26 commits)
  posix timers: fix RLIMIT_CPU && fork()
  time: ntp: fix bug in ntp_update_offset() & do_adjtimex(), fix
  time: ntp: clean up second_overflow()
  time: ntp: simplify ntp_tick_adj calculations
  time: ntp: make 64-bit constants more robust
  time: ntp: refactor do_adjtimex() some more
  time: ntp: refactor do_adjtimex()
  time: ntp: fix bug in ntp_update_offset() & do_adjtimex()
  time: ntp: micro-optimize ntp_update_offset()
  time: ntp: simplify ntp_update_offset_fll()
  time: ntp: refactor and clean up ntp_update_offset()
  time: ntp: refactor up ntp_update_frequency()
  time: ntp: clean up ntp_update_frequency()
  time: ntp: simplify the MAX_TICKADJ_SCALED definition
  time: ntp: simplify the second_overflow() code flow
  time: ntp: clean up kernel/time/ntp.c
  x86: hpet: stop HPET_COUNTER when programming periodic mode
  x86: hpet: provide separate functions to stop and start the counter
  x86: hpet: print HPET registers during setup (if hpet=verbose is used)
  time: apply NTP frequency/tick changes immediately
  ...
2009-03-26 16:05:42 -07:00
Linus Torvalds
13220a94d3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1750 commits)
  ixgbe: Allow Priority Flow Control settings to survive a device reset
  net: core: remove unneeded include in net/core/utils.c.
  e1000e: update version number
  e1000e: fix close interrupt race
  e1000e: fix loss of multicast packets
  e1000e: commonize tx cleanup routine to match e1000 & igb
  netfilter: fix nf_logger name in ebt_ulog.
  netfilter: fix warning in ebt_ulog init function.
  netfilter: fix warning about invalid const usage
  e1000: fix close race with interrupt
  e1000: cleanup clean_tx_irq routine so that it completely cleans ring
  e1000: fix tx hang detect logic and address dma mapping issues
  bridge: bad error handling when adding invalid ether address
  bonding: select current active slave when enslaving device for mode tlb and alb
  gianfar: reallocate skb when headroom is not enough for fcb
  Bump release date to 25Mar2009 and version to 0.22
  r6040: Fix second PHY address
  qeth: fix wait_event_timeout handling
  qeth: check for completion of a running recovery
  qeth: unregister MAC addresses during recovery.
  ...

Manually fixed up conflicts in:
	drivers/infiniband/hw/cxgb3/cxio_hal.h
	drivers/infiniband/hw/nes/nes_nic.c
2009-03-26 15:54:36 -07:00
Linus Torvalds
39b566eedb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (30 commits)
  RDMA/cxgb3: Enforce required firmware
  IB/mlx4: Unregister IB device prior to CLOSE PORT command
  mlx4_core: Add link type autosensing
  mlx4_core: Don't perform SET_PORT command for Ethernet ports
  RDMA/nes: Handle MPA Reject message properly
  RDMA/nes: Improve use of PBLs
  RDMA/nes: Remove LLTX
  RDMA/nes: Inform hardware that asynchronous event has been handled
  RDMA/nes: Fix tmp_addr compilation warning
  RDMA/nes: Report correct vendor_id and vendor_part_id
  RDMA/nes: Update copyright to new legal entity and year
  RDMA/nes: Account for freed PBL after HW operation
  IB: Remove useless ibdev_is_alive() tests from sysfs code
  IB/sa_query: Fix AH leak due to update_sm_ah() race
  IB/mad: Fix ib_post_send_mad() returning 0 with no generate send comp
  IB/mad: initialize mad_agent_priv before putting on lists
  IB/mad: Fix null pointer dereference in local_completions()
  IB/mad: Fix RMPP header RRespTime manipulation
  IB/iser: Remove hard setting of path MTU
  mlx4_core: Add device IDs for MT25458 10GigE devices
  ...
2009-03-26 15:47:08 -07:00
David S. Miller
08abe18af1 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/net/wimax/i2400m/usb-notif.c
2009-03-26 15:23:24 -07:00
Ingo Molnar
7c526e1fef Merge branches 'timers/new-apis', 'timers/ntp' and 'timers/urgent' into timers/core 2009-03-26 15:45:52 +01:00
Roland Dreier
09f98bafea Merge branches 'cxgb3', 'endian', 'ipath', 'ipoib', 'iser', 'mad', 'misc', 'mlx4', 'mthca', 'nes' and 'sysfs' into for-next 2009-03-24 20:44:41 -07:00
Steve Wise
d1fbe04eee RDMA/cxgb3: Enforce required firmware
The cxgb3 NIC driver can handle more firmware versions than iw_cxgb3,
and since commit 8207befa ("cxgb3: untie strict FW matching") cxgb3
will load with firmware versions that iw_cxgb3 can't handle.  The FW
major number indicates a specific interface between the FW and
iw_cxgb3.  Thus if the major number of the running firmware does not
match the required version compiled into iw_cxgb3, then iw_cxgb3 must
not register that device.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-24 20:44:18 -07:00
Stephen Hemminger
fe8114e8e1 infiniband: convert ipoib to net_device_ops
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:19:14 -07:00
Stephen Hemminger
d0929553be infiniband: convert nes driver to net_device_ops
Also, removed unnecessary memset() since alloc_netdev returns
zeroed memory.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:19:13 -07:00
Stephen Hemminger
687c75dcf3 infiniband: convert c2 to net_device_ops
Convert this driver to new net_device_ops infrastructure.
Also use default net_device get-stats infrastructure

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:19:13 -07:00
Yevgeny Petrilin
a6a47771b1 IB/mlx4: Unregister IB device prior to CLOSE PORT command
According to the ConnectX programmer's reference manual, all
operations should be stopped, all QPs should be torn down and all WQEs
flushed before the CLOSE_PORT command is invoked.  In some cases
reversing the order of operations (as implemented now) could cause
a loss of completions.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-18 19:49:54 -07:00
Mike Christie
5e7facb77f [SCSI] iscsi class: remove host no argument from session creation callout
We do not need to have llds set the host no for the session's
parent, because we know the session's parent is going to be
the host. This removes it from the session creation callback
and converts the drivers.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13 15:29:39 -05:00
Mike Christie
4d1083509a [SCSI] iscsi lib: remove qdepth param from iscsi host allocation
The qdepth setting was useful when we needed libiscsi to verify
the setting. Now we just need to make sure if older tools
passed in zero then we need to set some default.

So this patch just has us use the sht->cmd_per_lun or if
for LLD does a host per session then we can set it on per
host basis.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13 15:28:55 -05:00
Mike Christie
32ae763e3f [SCSI] iscsi lib: have lib create work queue for transmitting IO
We were using the shost work queue which ended up being
a little akward since all iscsi hosts need a thread for
scanning, but only drivers hooked into libiscsi need
a workqueue for transmitting. So this patch moves the
xmit workqueue to the lib.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13 15:28:37 -05:00
Mike Christie
e28f3d5b51 [SCSI] libiscsi: don't cap queue depth in iscsi modules
There is no need to cap the queue depth in the modules. We set
this in userspace and can do that there. For performance testing
with ram based targets, this is helpful since we can have very
high queue depths.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13 15:28:06 -05:00
Mike Christie
48a237a26d [SCSI] iser: have iser use its own logging
iser has its own logging inrfastrucutre. Convert it to use
it instead of libiscsi.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13 15:26:51 -05:00
Faisal Latif
c12e56ef69 RDMA/nes: Don't allow userspace QPs to use STag zero
STag zero is a special STag that allows consumers to access any bus
address without registering memory.  The nes driver unfortunately
allows STag zero to be used even with QPs created by unprivileged
userspace consumers, which means that any process with direct verbs
access to the nes device can read and write any memory accessible to
the underlying PCI device (usually any memory in the system).  Such
access is usually given for cluster software such as MPI to use, so
this is a local privilege escalation bug on most systems running this
driver.

The driver was using STag zero to receive the last streaming mode
data; to allow STag zero to be disabled for unprivileged QPs, the
driver now registers a special MR for this data.

Cc: <stable@kernel.org>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-12 16:21:41 -07:00
Faisal Latif
9d5ab13325 RDMA/nes: Handle MPA Reject message properly
While doing testing, there are failures as MPA Reject call is not
handled.  To handle MPA Reject call, following changes are done:

*Handle inbound/outbound MPA Reject response message.
	When nes_reject() is called for pending MPA request reply,
	send the MPA Reject message to its peer (active
	side)cm_node. The peer cm_node (active side) will indicate
	Reject message event for the pending Connect Request.

*Handle MPA Reject response message for loopback connections and listener.
	When MPA Request is rejected, check if it is a loopback
	connection and if it is then it will send Reject message event
	to its peer loopback node. Also when destroying listener,
	check if the cm_nodes for that listener are loopback or not.

*Add gracefull connection close with the MPA Reject response message.
	Send gracefull close (FIN, FIN ACK..) to terminate the cm_nodes.

*Some code re-org while making the above changes.
	Removed recv_list and recv_list_lock from the cm_node
	structure as there can be only one receive close entry on the
	timer. Also implemented handle_recv_entry() as receive close
	entry is processed from both nes_rem_ref_cm_node() as well as
	nes_cm_timer_tick().

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-06 15:15:01 -08:00
Don Wood
0145f341a9 RDMA/nes: Improve use of PBLs
Two level 256 byte PBLs was not implemented so the driver could report
out of memory when in fact there were PBLs still available.

This solution prefers to use 4KB PBLs over two level 256B PBLs until
the number of 4KB PBLs falls below a threshold.  At this point the 4KB
PBL structure is converted to use 256B PBLs which prevents the driver
from running out of 4KB PBLs too quickly.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-06 15:15:00 -08:00
Faisal Latif
2869975cfb RDMA/nes: Remove LLTX
NETIF_F_LLTX is deprecated. Remove private TX locking from the driver
and remove the NETIF_F_LLTX feature flag.  This also fixes a warning
in some configs that comes from doing skb_linearize() call in the
hard_start_xmit method with IRQs disabled (if HIGHMEM is enabled,
skb_linearize() may end up enabling BHs, which is a no-no if hard IRQs
are disabled in that context).  By getting rid of LLTX, we do not
disable IRQs when skb_linearize() is called.

Remove the sq_lock as it is not needed for non-LLTX.  Fix ethtool not
to show the counter for sq_lock.

Reported-by: aluno3@poczta.onet.pl
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-06 15:12:11 -08:00
Don Wood
fd87778cb9 RDMA/nes: Inform hardware that asynchronous event has been handled
When asynchronous events are processed by software, it is necessary
to let the hardware know that software has handled the event.  This
frees up the entry in the asynchronous event queue.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-06 15:12:11 -08:00
Chien Tung
7b14ab0b43 RDMA/nes: Fix tmp_addr compilation warning
In find_node(), tmp_addr causes an "unused variable" warning when
INFINIBAND_NES_DEBUG is not defined.  It's only used in a nes_debug()
and the print does not make sense.  So take out the whole thing.

Reported-by: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-06 15:12:11 -08:00
Chien Tung
b9c367e7e6 RDMA/nes: Report correct vendor_id and vendor_part_id
ibv_devinfo displays 0 for vendor_id and vendor_part_id.  Fill in OUI
and device_id for those two fields.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-06 15:12:10 -08:00
Chien Tung
cd6853d3eb RDMA/nes: Update copyright to new legal entity and year
Update copyright to the new legal entity, Intel-NE, Inc., an Intel
company.  Update copyright for the new year.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-06 15:12:10 -08:00
Don Wood
dae5d13a7e RDMA/nes: Account for freed PBL after HW operation
Fix occurrences where the software PBL counts were changed before the
hardware was updated.  This bug allowed another thread to overallocate
the hardware resources.

Add proper PBL accounting in case nes_reg_mr() fails.

Signed-off-by: Don Wood <donald.e.wood@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-06 15:12:09 -08:00
Roland Dreier
6432f36684 IB: Remove useless ibdev_is_alive() tests from sysfs code
Some attribute show functions test ibdev_is_alive() to make sure that
it's OK to access device state.  However, the sysfs attributes will
not be registered until the device is fully initialized, and they'll
be unregistered before anything is torn down, so ibdev_is_alive()
doesn't do anything useful.  Remove it.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-04 15:22:39 -08:00
Jack Morgenstein
6b708b3dde IB/sa_query: Fix AH leak due to update_sm_ah() race
Our testing uncovered a race condition in ib_sa_event():

	spin_lock_irqsave(&port->ah_lock, flags);
	if (port->sm_ah)
		kref_put(&port->sm_ah->ref, free_sm_ah);
	port->sm_ah = NULL;
	spin_unlock_irqrestore(&port->ah_lock, flags);

	schedule_work(&sa_dev->port[event->element.port_num -
				    sa_dev->start_port].update_task);

If two events occur back-to-back (e.g., client-reregister and LID
change), both may pass the spinlock-protected code above before the
scheduled work updates the port->sm_ah handle.  Then if the scheduled
work ends up running twice, the second operation will then find a
non-NULL port->sm_ah, and will simply overwrite it in update_sm_ah --
resulting in an AH leak.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-03 14:30:01 -08:00
Ralph Campbell
4780c1953f IB/mad: Fix ib_post_send_mad() returning 0 with no generate send comp
If ib_post_send_mad() returns 0, the API guarantees that there will be
a callback to send_buf->mad_agent->send_handler() so that the sender
can call ib_free_send_mad().  Otherwise, the ib_mad_send_buf will be
leaked and the mad_agent reference count will never go to zero and the
IB device module cannot be unloaded.  The above can happen without
this patch if process_mad() returns (IB_MAD_RESULT_SUCCESS |
IB_MAD_RESULT_CONSUMED).

If process_mad() returns IB_MAD_RESULT_SUCCESS and there is no agent
registered to receive the mad being sent, handle_outgoing_dr_smp()
returns zero which causes a MAD packet which is at the end of the
directed route to be incorrectly sent on the wire but doesn't cause a
hang since the HCA generates a send completion.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-03 14:22:17 -08:00
Ralph Campbell
d9620a4c82 IB/mad: initialize mad_agent_priv before putting on lists
There is a potential race in ib_register_mad_agent() where the struct
ib_mad_agent_private is not fully initialized before it is added to
the list of agents per IB port. This means the ib_mad_agent_private
could be seen before the refcount, spin locks, and linked lists are
initialized.  The fix is to initialize the structure earlier.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-27 14:44:32 -08:00
Ralph Campbell
1d9bc6d648 IB/mad: Fix null pointer dereference in local_completions()
handle_outgoing_dr_smp() can queue a struct ib_mad_local_private
*local on the mad_agent_priv->local_work work queue with
local->mad_priv == NULL if device->process_mad() returns
IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY and
(!ib_response_mad(&mad_priv->mad.mad) ||
!mad_agent_priv->agent.recv_handler).

In this case, local_completions() will be called with local->mad_priv
== NULL. The code does check for this case and skips calling
recv_mad_agent->agent.recv_handler() but recv == 0 so
kmem_cache_free() is called with a NULL pointer.

Also, since recv isn't reinitialized each time through the loop, it
can cause a memory leak if recv should have been zero.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
2009-02-27 10:34:30 -08:00
Or Gerlitz
1aedb7721f IB/iser: Remove hard setting of path MTU
Remove hard setting of the IB MTU used by iSER's RC queue-pair to 1K,
as this was done due to inter-op issues with an old iser target which
is not used any more.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-27 10:30:46 -08:00
Roland Dreier
9206dff157 IB: Remove sysfs files before unregistering device
Move the ib_device_unregister_sysfs() call from ib_dealloc_device() to
ib_unregister_device().  The old code allows device unregister to
proceed even if some sysfs files are open, which leaves a window where
userspace can open a file before a device is removed but then end up
reading the file after the device is removed, which leads to various
kernel crashes either because the device data structure is freed or
because the low-level driver code is gone after module removal.

By not returning from ib_unregister_device() until after all sysfs
entries are removed, we make sure that data structures and/or module
code is not freed until after all sysfs access is done.

Reported-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-25 13:27:46 -08:00