RT_TOS() from include/uapi/linux/in_route.h is defined using
IPTOS_TOS_MASK from include/uapi/linux/ip.h. This is problematic for
files such as include/net/ip_fib.h that want to use RT_TOS() as without
including both header files kernel compilation fails:
In file included from ./include/net/ip_fib.h:25,
from ./include/net/route.h:27,
from ./include/net/lwtunnel.h:9,
from net/core/dst.c:24:
./include/net/ip_fib.h: In function ‘fib_dscp_masked_match’:
./include/uapi/linux/in_route.h:31:32: error: ‘IPTOS_TOS_MASK’ undeclared (first use in this function)
31 | #define RT_TOS(tos) ((tos)&IPTOS_TOS_MASK)
| ^~~~~~~~~~~~~~
./include/net/ip_fib.h:440:45: note: in expansion of macro ‘RT_TOS’
440 | return dscp == inet_dsfield_to_dscp(RT_TOS(fl4->flowi4_tos));
Therefore, cited commit changed linux/in_route.h to include linux/ip.h.
However, as reported by David, this breaks iproute2 compilation due
overlapping definitions between linux/ip.h and
/usr/include/netinet/ip.h:
In file included from ../include/uapi/linux/in_route.h:5,
from iproute.c:19:
../include/uapi/linux/ip.h:25:9: warning: "IPTOS_TOS" redefined
25 | #define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK)
| ^~~~~~~~~
In file included from iproute.c:17:
/usr/include/netinet/ip.h:222:9: note: this is the location of the previous definition
222 | #define IPTOS_TOS(tos) ((tos) & IPTOS_TOS_MASK)
Fix by changing include/net/ip_fib.h to include linux/ip.h. Note that
usage of RT_TOS() should not spread further in the kernel due to recent
work in this area.
Fixes: 1fa3314c14 ("ipv4: Centralize TOS matching")
Reported-by: David Ahern <dsahern@kernel.org>
Closes: https://lore.kernel.org/netdev/2f5146ff-507d-4cab-a195-b28c0c9e654e@kernel.org/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20240903133554.2807343-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit aa92c1cec9 ("l2tp: add tunnel/session get_next helpers") uses
idr_get_next APIs to iterate over l2tp session IDR lists. Sessions in
l2tp_v2_session_idr always have a non-null session->tunnel pointer
since l2tp_session_register sets it before inserting the session into
the IDR. Therefore the null check on session->tunnel in
l2tp_v2_session_get_next is redundant and can be removed. Removing the
check avoids a warning from lkp.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202408111407.HtON8jqa-lkp@intel.com/
CC: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: James Chapman <jchapman@katalix.com>
Acked-by: Tom Parkin <tparkin@katalix.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240903113547.1261048-1-jchapman@katalix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When userspace wants to take over a fdb entry by setting it as
EXTERN_LEARNED, we set both flags BR_FDB_ADDED_BY_EXT_LEARN and
BR_FDB_ADDED_BY_USER in br_fdb_external_learn_add().
If the bridge updates the entry later because its port changed, we clear
the BR_FDB_ADDED_BY_EXT_LEARN flag, but leave the BR_FDB_ADDED_BY_USER
flag set.
If userspace then wants to take over the entry again,
br_fdb_external_learn_add() sees that BR_FDB_ADDED_BY_USER and skips
setting the BR_FDB_ADDED_BY_EXT_LEARN flags, thus silently ignores the
update.
Fix this by always allowing to set BR_FDB_ADDED_BY_EXT_LEARN regardless
if this was a user fdb entry or not.
Fixes: 710ae72877 ("net: bridge: Mark FDB entries that were added by user as such")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240903081958.29951-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generic_ocp_write() asks the parameter "size" must be 4 bytes align.
Therefore, write the bp would fail, if the mac->bp_num is odd. Align the
size to 4 for fixing it. The way may write an extra bp, but the
rtl8152_is_fw_mac_ok() makes sure the value must be 0 for the bp whose
index is more than mac->bp_num. That is, there is no influence for the
firmware.
Besides, I check the return value of generic_ocp_write() to make sure
everything is correct.
Fixes: e5c266a611 ("r8152: set bp in bulk")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://patch.msgid.link/20240903063333.4502-1-hayeswang@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mana_set_channels() function requires detaching the mana
driver and reattaching it with changed channel values.
During this operation if the system is low on memory, the reattach
might fail, causing the network device being down.
To avoid this we pre-allocate buffers at the beginning of set operation,
to prevent complete network loss
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1725248734-21760-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bareudp devices update their stats concurrently.
Therefore they need proper atomic increments.
Fixes: 571912c69f ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/04b7b9d0b480158eb3ab4366ec80aa2ab7e41fcb.1725031794.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix a typo in the rebalance accounting changes
- BCH_SB_MEMBER_INVALID: small on disk format feature which will be
needed for full erasure coding support; this is only the minimum so
that 6.11 can handle future versions without barfing.
-----BEGIN PGP SIGNATURE-----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=ABhR
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-09-04' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- Fix a typo in the rebalance accounting changes
- BCH_SB_MEMBER_INVALID: small on disk format feature which will be
needed for full erasure coding support; this is only the minimum so
that 6.11 can handle future versions without barfing.
* tag 'bcachefs-2024-09-04' of git://evilpiepirate.org/bcachefs:
bcachefs: BCH_SB_MEMBER_INVALID
bcachefs: fix rebalance accounting
A number of small fixes for the late cycle:
* Two more build fixes on 32-bit archs
* Fixed a segfault during perf test
* Fixed spinlock/rwlock accounting bug in perf lock contention
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZtil/AAKCRCMstVUGiXM
g1p5AQCmfXr4T/CCVX82ExpHYYtsrbcQrmqMolqsGlN4J3I9EwD9EnSNIEkxy44o
bOrHRAzABpMTbhU8zVb2Mi+Gy+iccgc=
=SFTw
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.11-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A number of small fixes for the late cycle:
- Two more build fixes on 32-bit archs
- Fixed a segfault during perf test
- Fixed spinlock/rwlock accounting bug in perf lock contention"
* tag 'perf-tools-fixes-for-v6.11-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf daemon: Fix the build on more 32-bit architectures
perf python: include "util/sample.h"
perf lock contention: Fix spinlock and rwlock accounting
perf test pmu: Set uninitialized PMU alias to null
-----BEGIN PGP SIGNATURE-----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=LHQV
-----END PGP SIGNATURE-----
Merge tag 'for-6.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- followup fix for direct io and fsync under some conditions, reported
by QEMU users
- fix a potential leak when disabling quotas while some extent tracking
work can still happen
- in zoned mode handle unexpected change of zone write pointer in
RAID1-like block groups, turn the zones to read-only
* tag 'for-6.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race between direct IO write and fsync when using same fd
btrfs: zoned: handle broken write pointer on zones
btrfs: qgroup: don't use extent changeset when not needed
-----BEGIN PGP SIGNATURE-----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=yxks
-----END PGP SIGNATURE-----
Merge tag 'v6.11-rc6-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix crash in session setup
- Fix locking bug
- Improve access bounds checking
* tag 'v6.11-rc6-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: Unlock on in ksmbd_tcp_set_interfaces()
ksmbd: unset the binding mark of a reused connection
smb: Annotate struct xattr_smb_acl with __counted_by()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZtQmqAAKCRCRxhvAZXjc
os+mAP47NBhOecERCJSmS0RFMuRvc0ijxz1642emEthZhtf8qQD/cy56WmGZqEFZ
bfj5v6tGmsxGt4xMDUDNG0pvqba8hwA=
=JBA5
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.11-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Two netfs fixes for this merge window:
- Ensure that fscache_cookie_lru_time is deleted when the fscache
module is removed to prevent UAF
- Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
Before it used truncate_inode_pages_partial() which causes
copy_file_range() to fail on cifs"
* tag 'vfs-6.11-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fscache: delete fscache_cookie_lru_timer when fscache exits to avoid UAF
mm: Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
- Fix a build issue with older binutils with LD dead code elimination
disabled
-----BEGIN PGP SIGNATURE-----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=fJoT
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM fix from Russell King:
- Fix a build issue with older binutils with LD dead code elimination
disabled
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9414/1: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION
- Fix boot issue where boot memory is marked read-only too early
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZtgixgAKCRD3ErUQojoP
X6CGAQDPjigX2Cxo/BpWv5NNsRkbJ5QETvDQTro4V9TVl8pE5AEA084As/smH7TS
FB0JfKG1MkMwqlnZdVFLJ78Y8Aiwwgs=
=ru1k
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fix from Helge Deller:
- Fix boot issue where boot memory is marked read-only too early
* tag 'parisc-for-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Delay write-protection until mark_rodata_ro() call
Mostly MM, no identifiable theme. And a few nilfs2 fixups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZtfR/wAKCRDdBJ7gKXxA
jofjAP9rUlliIcn8zcy7vmBTuMaH4SkoULB64QWAUddaWV+SCAEA+q0sntLPnTIZ
My3sfihR6mbvhkgKbvIHm6YYQI56NAc=
=b4Lr
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-09-03-20-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes, 15 of which are cc:stable.
Mostly MM, no identifiable theme. And a few nilfs2 fixups"
* tag 'mm-hotfixes-stable-2024-09-03-20-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
alloc_tag: fix allocation tag reporting when CONFIG_MODULES=n
mm: vmalloc: optimize vmap_lazy_nr arithmetic when purging each vmap_area
mailmap: update entry for Jan Kuliga
codetag: debug: mark codetags for poisoned page as empty
mm/memcontrol: respect zswap.writeback setting from parent cg too
scripts: fix gfp-translate after ___GFP_*_BITS conversion to an enum
Revert "mm: skip CMA pages when they are not available"
maple_tree: remove rcu_read_lock() from mt_validate()
kexec_file: fix elfcorehdr digest exclusion when CONFIG_CRASH_HOTPLUG=y
mm/slub: add check for s->flags in the alloc_tagging_slab_free_hook
nilfs2: fix state management in error path of log writing function
nilfs2: fix missing cleanup on rollforward recovery error
nilfs2: protect references to superblock parameters exposed in sysfs
userfaultfd: don't BUG_ON() if khugepaged yanks our page table
userfaultfd: fix checks for huge PMDs
mm: vmalloc: ensure vmap_block is initialised before adding to queue
selftests: mm: fix build errors on armhf
There is a build issue with LD segmentation fault, while
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled, as bellow.
scripts/link-vmlinux.sh: line 49: 3796 Segmentation fault
(core dumped) ${ld} ${ldflags} -o ${output} ${wl}--whole-archive
${objs} ${wl}--no-whole-archive ${wl}--start-group
${libs} ${wl}--end-group ${kallsymso} ${btf_vmlinux_bin_o} ${ldlibs}
The error occurs in older versions of the GNU ld with version earlier
than 2.36. It makes most sense to have a minimum LD version as
a dependency for HAVE_LD_DEAD_CODE_DATA_ELIMINATION and eliminate
the impact of ".reloc .text, R_ARM_NONE, ." when
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled.
Fixes: ed0f941022 ("ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION")
Reported-by: Harith George <mail2hgg@gmail.com>
Tested-by: Harith George <mail2hgg@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://lore.kernel.org/all/14e9aefb-88d1-4eee-8288-ef15d4a9b059@gmail.com/
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Marc Kleine-Budde <mkl@pengutronix.de> says:
This series adds support for the CAN-FD IP core found on the Rockchip
RK3568.
The IP core is a bit complicated and has several documented errata.
The driver is added in several stages, first the base driver including
the RX-path. Then several workarounds for errata and the TX-path, and
finally features like hardware time stamping, loop-back mode and
bus error reporting.
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-0-8ae22bcb27cc@pengutronix.de
[mkl: removed DTS patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The previous commit prepared the TX path to make use of the full
TX-FIFO depth as much as possible. Increase the available TX-FIFO
depth to the hardware maximum of 2.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-17-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
So far the TX-FIFO is only used with a depth of 1, although the
hardware offers a depth of 2.
The workaround for the chips that are affected by erratum 6, i.e. EFF
frames may be send as standard frames, is to re-send the EFF frame.
This means the driver cannot queue the next frame for sending, as long
ad the EFF frame has not been successfully send out.
Introduce rkcanfd_get_effective_tx_free() that returns "0" space in
the TX-FIFO if an EFF frame is pending and the actual free space in
the TX-FIFO otherwise. Then replace rkcanfd_get_tx_free() with
rkcanfd_get_effective_tx_free() everywhere.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-16-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver contains workarounds for some of the rk3568v2 errata. Add
ethtool-based statistics ("ethtool -S") to track how often an erratum
workaround was needed.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-15-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tests show that sometimes both CAN bus error counters read 0x0, even
if the controller is in warning mode
(RKCANFD_REG_STATE_ERROR_WARNING_STATE in RKCANFD_REG_STATE
set).
To work around this issue, if both error counters read from hardware
are 0x0, use the structure priv->bec, otherwise save the read value in
priv->bec.
In rkcanfd_handle_rx_int_one() decrement the priv->bec.rxerr for
successfully RX'ed CAN frames.
In rkcanfd_handle_tx_done_one() decrement the priv->bec.txerr for
successfully TX'ed CAN frames.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-14-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:
| A dominant bit at the third bit of the intermission may cause a
| transmission error.
|
| When sampling the third bit of the intermission as a dominant bit, if
| tx_req is configured to transmit extended frames at this time, the
| extended frame may be sent to the bus in the format of a standard
| frame. The extended frame will be sent as a standard frame and will not
| result in error frames
Turn on "Interframe Spaceing RX Mode" only during TX to work around
erratum 12, according to rock-chip:
| Spaceing RX Mode = 1, the third Bit between frames cannot receive
| and send, and the fourth Bit begins to receive and send.
|
| Spaceing RX Mode = 0, allowing the third Bit between frames to
| receive and send.
Message-ID: <be72939f-0a9e-0608-dfff-7b0096a26eba@rock-chips.com>
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-13-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:
| The CAN controller's transmission of extended frames may
| intermittently change into standard frames.
|
| When using the CAN controller to send extended frames, if the
| 'tx_req' is configured as 1 and coincides with the internal
| transmission point, the extended frame will be transmitted onto the
| bus in the format of a standard frame.
To work around Erratum 6, the driver is in self-receiving mode (RXSTX)
and all received CAN frames are passed through rkcanfd_rxstx_filter().
Add a check in rkcanfd_rxstx_filter() whether the received frame
corresponds to the current outgoing frame, but the extended CAN ID has
been mangled to a standard ID. In this case re-send the original CAN
frame.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-12-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The IP core has a TX event FIFO. In other IP cores, this type of FIFO
usually contains the events that a CAN frame has been successfully
sent. However, the IP core on the rk3568v2 the FIFO also holds events
of unsuccessful transmission attempts.
It turned out that the best way to work around this problem is to set
the IP core to self-receive mode (RXSTX), filter out the self-received
frames and insert them into the complete TX path.
Add a pair new functions to check if 2 struct canfd_frame are equal.
The 1st checks if the header of the CAN frames are equal, the 2nd
checks if the data portion are equal:
- rkcanfd_can_frame_header_equal()
- rkcanfd_can_frame_data_equal()
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-11-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tests on the rk3568v2 and rk3568v3 show that a reduced "baudclk" (e.g.
80MHz, compared to the standard 300MHz) significantly increases the
possibility of incorrect FIFO counters, i.e. erratum 5.
Print an info message if the clock is below the known good value of
300MHz.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-10-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:
| Erratum 5: Counters related to the TXFIFO and RXFIFO exhibit
| abnormal counting behavior.
|
| Due to a bug in the cross-asynchronous logic of the enable signals
| for rx_fifo_cnt and txe_fifo_frame_cnt counters, the counts of these
| two counters become inaccurate. This issue has resulted in the
| inability to use the TXFIFO and RXFIFO functions.
The errata sheet mentioned above states that only the rk3568v2 is
affected by this erratum, but tests with the rk3568v2 and rk3568v3
show that the RX_FIFO_CNT is sometimes too high. This leads to CAN
frames being read from the FIFO, which is then already empty.
Further tests on the rk3568v2 and rk3568v3 show that in this
situation (i.e. empty FIFO) all elements of the FIFO
header (frameinfo, id, ts) contain the same data.
On the rk3568v2 and rk3568v3, this problem only occurs extremely
rarely with the standard clock of 300 MHz, but almost immediately at
80 MHz.
To workaround this problem, check for empty FIFO with
rkcanfd_fifo_header_empty() in rkcanfd_handle_rx_int_one() and exit
early.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-9-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The errata sheets doesn't say anything about CAN-FD, but tests on the
rk3568v2 and rk3568v3 show that receiving certain CAN-FD frames
triggers an Error Interrupt.
Mark the CAN-FD support as broken.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-6-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add driver for the Rockchip CAN-FD controller.
The IP core on the rk3568v2 SoC has 12 documented errata. Corrections
for these errata will be added in the upcoming patches.
Since several workarounds are required for the TX path, only add the
base driver that only implements the RX path.
Although the RX path implements CAN-FD support, it's not activated in
ctrlmode_supported, as the IP core in the rk3568v2 has problems with
receiving or sending certain CAN-FD frames.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-4-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add support for group stats for mac. The fbnic_set_counter help preserve
the default values for counters which are not touched by the driver.
The 'reset' flag in 'get_eth_mac_stats' allows to choose between
resetting the counter to recent most value or fetching the aggregated
values of the counter.
The 'fbnic_stat_rd64' read 64b stats counters in an atomic fashion using
read-read-read approach. This allows to isolate cases where counter is
moving too fast making accuracy of the counter questionable.
Command: ethtool -S eth0 --groups eth-mac
Example Output:
eth-mac-FramesTransmittedOK: 421644
eth-mac-FramesReceivedOK: 3849708
eth-mac-FrameCheckSequenceErrors: 0
eth-mac-AlignmentErrors: 0
eth-mac-OctetsTransmittedOK: 64799060
eth-mac-FramesLostDueToIntMACXmitError: 0
eth-mac-OctetsReceivedOK: 5134513531
eth-mac-FramesLostDueToIntMACRcvError: 0
eth-mac-MulticastFramesXmittedOK: 568
eth-mac-BroadcastFramesXmittedOK: 454
eth-mac-MulticastFramesReceivedOK: 276106
eth-mac-BroadcastFramesReceivedOK: 26119
eth-mac-FrameTooLongErrors: 0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ethtool ops support and enable 'get_drvinfo' for fbnic. The driver
provides firmware version information while the driver name and bus
information is provided by ethtool_get_drvinfo().
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the SO_PEEK_OFF selftest for UDP. In this patch, I mainly do
three things:
1. rename tcp_so_peek_off.c
2. adjust for UDP protocol
3. add selftests into it
Suggested-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Machon says:
====================
net: microchip: add FDMA library and use it for Sparx5
This patch series is the first of a 2-part series, that adds a new
common FDMA library for Microchip switch chips Sparx5 and lan966x. These
chips share the same FDMA engine, and as such will benefit from a
common library with a common implementation. This also has the benefit
of removing a lot open-coded bookkeeping and duplicate code for the two
drivers.
Additionally, upstreaming efforts for a third chip, lan969x, will begin
in the near future. This chip will use the new library too.
In this first series, the FDMA library is introduced and used by the
Sparx5 switch driver.
###################
# Example of use: #
###################
- Initialize the rx and tx fdma structs with values for: number of
DCB's, number of DB's, channel ID, DB size (data buffer size), and
total size of the requested memory. Also provide two callbacks:
nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr.
- Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent().
- Initialize the DCB's with fdma_dcb_init().
- Add new DCB's with fdma_dcb_add().
- Free memory with fdma_free_phys() or fdma_free_coherent().
#####################
# Patch breakdown: #
#####################
Patch #1: introduces library and selects it for Sparx5.
Patch #2: includes the fdma_api.h header and removes old symbols.
Patch #3: replaces old rx and tx variables with equivalent ones from the
fdma struct. Only the variables that can be changed without
breaking traffic is changed in this patch.
Patch #4: uses the library for allocation of rx buffers. This requires
quite a bit of refactoring in this single patch.
Patch #5: uses the library for adding DCB's in the rx path.
Patch #6: uses the library for freeing rx buffers.
Patch #7: uses the library helpers in the rx path.
Patch #8: uses the library for allocation of tx buffers. This requires
quite a bit of refactoring in this single patch.
Patch #9: uses the library for adding DCB's in the tx path.
Patch #10: uses the library helpers in the tx path.
Patch #11: ditches the existing linked list for storing buffer addresses,
and instead uses offsets into contiguous memory.
Patch #12: modifies existing rx and tx functions to be direction
independent.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
These direction specific functions can be ditched in favor of a single
function: sparx5_fdma_reload(), which retrieves the channel id from the
fdma struct instead.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the driver uses a linked list for storing the tx buffer
addresses. This requires a good amount of extra bookkeeping code. Ditch
the linked list in favor of tx buffers being in the same contiguous
memory space as the DCB's and the DB's. The FDMA library has a helper
for this - so use that.
The tx buffer addresses are now retrieved as an offset into the FDMA
memory space.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The library has the helper fdma_free_phys() for freeing physical FDMA
memory. Use it in the exit path.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the fdma_dcb_add() function to add DCB's in the tx path. This gets
rid of the open-coding of nextptr and dataptr handling and leaves it to
the library.
Also, make sure the fdma indexes are advanced using: fdma_dcb_advance(),
so that the correct nextptr and dataptr offsets are retrieved.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for tx
buffer allocation and use the new buffers throughout.
In order to replace the old buffers with the new ones, we have to do the
following refactoring:
- use fdma_alloc_phys() and fdma_dcb_init()
- replace the variables: tx->dma, tx->first_entry and tx->curr_entry
with the equivalents from the FDMA struct.
- replace uses of sparx5_db_hw and sparx5_tx_dcb_hw with fdma_db and
fdma_dcb.
- add sparx5_fdma_tx_dataptr_cb callback for obtaining the dataptr.
- Initialize FDMA struct values.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The library provides helpers for a number of DCB and DB operations. Use
these in the rx path.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The library has the helper fdma_free_phys() for freeing physical FDMA
memory. Use it in the exit path.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the fdma_dcb_add() function to add DCB's in the rx path. This gets
rid of the open-coding of nextptr and dataptr handling and leaves it to
the library.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for rx
buffer allocation and use the new buffers throughout.
In order to replace the old buffers with the new ones, we have to do the
following refactoring:
- use fdma_alloc_phys() and fdma_dcb_init()
- replace the variables: rx->dma, rx->dcb_entries and rx->last_entry
with the equivalents from the FDMA struct.
- replace uses of sparx5_db_hw and sparx5_rx_dcb_hw with fdma_db and
fdma_dcb.
- add sparx5_fdma_rx_dataptr_cb callback for obtaining the dataptr.
- Initialize FDMA struct values.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the old rx and tx variables: channel_id, FDMA_DCB_MAX,
FDMA_RX_DCB_MAX_DBS, FDMA_TX_DCB_MAX_DBS, dcb_index and db_index with
the equivalents from the FDMA rx and tx structs. These variables are not
entangled in any buffer allocation and can therefore be replaced in
advance.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>