Commit Graph

2367 Commits

Author SHA1 Message Date
Johannes Berg
7f3414226b um: time: fix initialization in time-travel mode
In time-travel mode, since my previous patch, the start time was
initialized too late, so that the system would read it before we
set it, thus always starting system time at 0 (1970-01-01). This
happens because timekeeping_init() reads the time and is called
before time_init().

Unfortunately, I didn't see this before because I was testing it
only with the RTC patch applied (and enabled), and then the time
is read again by the RTC a little - after time_init() this time.

Fix this by just doing the initialization whenever necessary.

Fixes: 2701c1bd91 ("um: time: Fix read_persistent_clock64() in time-travel")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-01-26 22:11:38 +01:00
Johannes Berg
9868c2081d um: fix os_idle_sleep() to not hang
Changing os_idle_sleep() to use pause() (I accidentally described
it as an empty select() in the commit log because I had changed it
from that to pause() in a later revision) exposed a race condition
in the idle code. The following can happen:

 timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=0, tv_nsec=624017}}, NULL) = 0
 ...
 <SIGALRM is delivered but we're already on the way to idle>
 pause()

and we now hang forever. This was previously possible as well, but
it could never cause UML to hang for more than a second since we
could only sleep for that much, so at most you'd notice a "hiccup"
in the UML. Obviously, any sort of external interrupt also "saves"
it and interrupts pause().

Fix this by properly handling the race, rather than papering over
it again:

 - first, block SIGALRM, and obtain the old signal set
 - check the timer
 - suspend, waiting for any signal out of the old set, if, and only
   if, the timer will fire in the future
 - restore the old signal mask

This ensures race-free operation: as it's blocked, the signal won't
be delivered while we're looking at the timer even if it were to be
triggered right _after_ we've returned from timer_gettime() with a
non-zero value (telling us the timer will trigger). Thus, despite
getting to sigsuspend() because timer_gettime() told us we're still
waiting, we'll not hang because sigsuspend() will return immediately
due to the pending signal.

Fixes: 49da38a3ef ("um: Simplify os_idle_sleep() and sleep longer")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-01-26 22:11:38 +01:00
Johannes Berg
a31e9c4e72 Revert "um: support some of ARCH_HAS_SET_MEMORY"
This reverts commit 963285b0b4 ("um: support some of
ARCH_HAS_SET_MEMORY"), as it turns out that it's not only not
working (due to um never using the protection bits in the
page tables) but also corrupts the page tables if used on a
non-vmalloc page, since um never allocates proper page tables
for the 'physmem' in the first place.

Fixing all this will take more effort, so for now revert it.

Reported-by: Benjamin Berg <benjamin@sipsolutions.net>
Fixes: 963285b0b4 ("um: support some of ARCH_HAS_SET_MEMORY")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-01-26 22:11:38 +01:00
Johannes Berg
2fcb4090cd Revert "um: allocate a guard page to helper threads"
This reverts commit ef4459a6da ("um: allocate a guard page to
helper threads"), it's broken in multiple ways:

 1) the free no longer matches the alloc; and

 2) more importantly, the set_memory_ro() causes allocation of
    page tables for the normal memory that doesn't have any,
    and that later causes corruption and crashes (usually but
    not always in vfree()).

We could fix the first bug and use vmalloc() to work around the
second, but set_memory_ro() actually doesn't do anything either
so I'll just revert that as well.

Reported-by: Benjamin Berg <benjamin@sipsolutions.net>
Fixes: ef4459a6da ("um: allocate a guard page to helper threads")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-01-26 22:11:38 +01:00
Johannes Berg
f4172b0843 um: virtio: free vu_dev only with the contained struct device
Since struct device is refcounted, we shouldn't free the vu_dev
immediately when it's removed from the platform device, but only
when the references actually all go away. Move the freeing to
the release to accomplish that.

Fixes: 5d38f32499 ("um: drivers: Add virtio vhost-user driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-01-26 22:11:38 +01:00
Thomas Meyer
e23fe90dec um: kmsg_dumper: always dump when not tty console
With the addition of the ttynull console driver, the chance that a
console driver was already registerd did increase. Refine the logic when
to dump the kernel message buffer: always dump the buffer, when the UML
stdio console driver is not active and the preferred console.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-01-26 22:11:37 +01:00
Thomas Meyer
d7ffac3363 um: stdio_console: Make preferred console
The addition of the "ttynull" console driver did break the ordering of the
UML stdio console driver.
The UML stdio console driver is added in late_initcall (7), whereby the
ttynull driver is added in device_initcall (6), which always does make the
ttynull driver the default console.

Fix it by explicitly adding the UML stdio console as the preferred console,
in case no 'console=' command line option was specified.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-01-26 22:11:37 +01:00
Johannes Berg
1cdcfb4437 um: return error from ioremap()
Back a few years ago, ioremap() was added to UML so that we'd
not break the build for everything all the time. However, for
some reason, v1 of the patch got applied, rather than the v2
that returned NULL, which was discussed here:

https://lore.kernel.org/lkml/1495726955-27497-1-git-send-email-logang@deltatee.com/

Fix that now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-01-26 22:11:37 +01:00
Hajime Tazaki
94c41b3a7c um: ubd: fix command line handling of ubd
This commit fixes a regression to handle command line parameters of ubd.
With a simple line "./linux ubd0="./disk-ext4.img", it fails at
ubd_setup_common().  The commit adds additional checks to the variables
in order to properly parse the paremeters which previously worked.

Fixes: ef3ba87cb7 ("um: ubd: Set device serial attribute from cmdline")
Cc: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Hajime Tazaki <thehajime@gmail.com>
Acked-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-01-26 22:10:44 +01:00
Linus Torvalds
345b17acb1 This pull request contains the following changes for UML:
- IRQ handling cleanups
 - Support for suspend
 - Various fixes for UML specific drivers: ubd, vector, xterm
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAl/bzaIWHHJpY2hhcmRA
 c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wYe+EAC2Q2GfncmAAK20vOMbNKH7KsTl
 ZncmGENzOayKMdaWTOQ7ycxUXL/IWsJ5ush8M52CxcaBZMWAsCxEJUf8QHtRbOkL
 OVXwW+xNNRioM+9J5ZR0PzDJtBbrDY/kqDCaTsM7/07UGKCih9UbYjdsRICC3pdL
 sPSLr7tLWXRNRRd2T+TeK0NQvka/VejasWqlPjMRXM8+eQAklVn7CnQxmemdVdU5
 BEbwBF/XKNdmXGTTxOBM1+66lYqd+Yf/cd+VCMyQWWax6/oUczhx2/3n5NpxcI50
 Da8FPkh49v0YWsMtCY87UhZHhF2c0fIrRQWlT9E12wLKSvdJvHTMqgj5tZevM9xg
 uqWYFiS+qLqkVaXu0WHtJfombrK30zFXCJsbsG3H2qN6CFOqiDaFu8sLcG6AVRhu
 anKGq9XbL1+DnFk2x5ExETY9wok8OMbF63yorFryp2aHTCfEXctyoqMidBvAxrpR
 QVjcF66ej8Y6KaKxc+PNQ5sQhQC7zakQPm/GlFR5lDJHyuugOOoCXdYkrH1cspgm
 DgrQbqo+B0G3G9P80vT5TB3M/bNEd8YLxGakBYFPpHfVAH8N5Adwg8r0ZD8n+rRx
 fKiUupw6lfinhTq5au84unaSTtvAiiNcjWN1utCh84VhrlCfP2MvnMHNj7E28mpz
 q1CBVpgeFxT3Lcp52g==
 =t1mQ
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml

Pull UML updates from Richard Weinberger:

 - IRQ handling cleanups

 - Support for suspend

 - Various fixes for UML specific drivers: ubd, vector, xterm

* tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (32 commits)
  um: Fix build w/o CONFIG_PM_SLEEP
  um: time-travel: Correct time event IRQ delivery
  um: irq/sigio: Support suspend/resume handling of workaround IRQs
  um: time-travel: Actually apply "free-until" optimisation
  um: chan_xterm: Fix fd leak
  um: tty: Fix handling of close in tty lines
  um: Monitor error events in IRQ controller
  um: allocate a guard page to helper threads
  um: support some of ARCH_HAS_SET_MEMORY
  um: time-travel: avoid multiple identical propagations
  um: Fetch registers only for signals which need them
  um: Support suspend to RAM
  um: Allow PM with suspend-to-idle
  um: time: Fix read_persistent_clock64() in time-travel
  um: Simplify os_idle_sleep() and sleep longer
  um: Simplify IRQ handling code
  um: Remove IRQ_NONE type
  um: irq: Reduce irq_reg allocation
  um: irq: Clean up and rename struct irq_fd
  um: Clean up alarm IRQ chip name
  ...
2020-12-17 17:56:44 -08:00
Linus Torvalds
005b2a9dc8 tif-task_work.arch-2020-12-14
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/YJxsQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpjpyEACBdW+YjenjTbkUPeEXzQgkBkTZUYw3g007
 DPcUT1g8PQZXYXlQvBKCvGhhIr7/KVcjepKoowiNQfBNGcIPJTVopW58nzpqAfTQ
 goI2WYGn5EKFFKBPvtH04cJD/Wo8muXdxynKtqyZbnGGgZjQxPrE259b8dpHjBSR
 6L7HHkk0D1oU/5b6h6Ocpg9mc/0iIUCZylySAYY3eGO0JaVPJaXgZSJZYgHxCHll
 Lb+/y/fXdtm/0PmQ3ko0ev54g3yEWqZIX0NsZW1asrButIy+KLzQ2Mz1xFLFDMag
 prtIfwb8tzgc4dFPY090C/azjCh5CPpxqYS6FkRwS0p86n6OhkyXrqfily5Hs4/B
 NC7CBPBSH/j+NKUK7CYZcpTzTpxPjUr9p0anUdlvMJz8FhTb/3YEEZ1UTeWOeHmk
 Yo5SxnFghLeZZeZ1ok6rdymnVa7WEX12SCLGQX31BB2mld0tNbKb4b+FsBF6OUMk
 IUaX6OjwDFVRaysC88BQ4hjcIP1HxsViG4/VZDX15gjAAH2Pvb+7tev+lcDcOhjz
 TCD4GNFspTFzRhh9nT7oxQ679qCh9G9zHbzuIRewnrS6iqvo5SJQB3dR2yrWZRRH
 ySkQFiHpYOlnLJYv0jg9COlGwo2FUdcvKhCvkjQKKBz48rzW/IC0LwKdRQWZDFk3
 FKGzP/NBig==
 =cadT
 -----END PGP SIGNATURE-----

Merge tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block

Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe:
 "This sits on top of of the core entry/exit and x86 entry branch from
  the tip tree, which contains the generic and x86 parts of this work.

  Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL.

  With that done, we can get rid of JOBCTL_TASK_WORK from task_work and
  signal.c, and also remove a deadlock work-around in io_uring around
  knowing that signal based task_work waking is invoked with the sighand
  wait queue head lock.

  The motivation for this work is to decouple signal notify based
  task_work, of which io_uring is a heavy user of, from sighand. The
  sighand lock becomes a huge contention point, particularly for
  threaded workloads where it's shared between threads. Even outside of
  threaded applications it's slower than it needs to be.

  Roman Gershman <romger@amazon.com> reported that his networked
  workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU
  after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all
  spent hammering on the sighand lock, showing 57% of the CPU time there
  [1].

  There are further cleanups possible on top of this. One example is
  TIF_PATCH_PENDING, where a patch already exists to use
  TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more
  consolidation, but the work stands on its own as well"

[1] https://github.com/axboe/liburing/issues/215

* tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits)
  io_uring: remove 'twa_signal_ok' deadlock work-around
  kernel: remove checking for TIF_NOTIFY_SIGNAL
  signal: kill JOBCTL_TASK_WORK
  io_uring: JOBCTL_TASK_WORK is no longer used by task_work
  task_work: remove legacy TWA_SIGNAL path
  sparc: add support for TIF_NOTIFY_SIGNAL
  riscv: add support for TIF_NOTIFY_SIGNAL
  nds32: add support for TIF_NOTIFY_SIGNAL
  ia64: add support for TIF_NOTIFY_SIGNAL
  h8300: add support for TIF_NOTIFY_SIGNAL
  c6x: add support for TIF_NOTIFY_SIGNAL
  alpha: add support for TIF_NOTIFY_SIGNAL
  xtensa: add support for TIF_NOTIFY_SIGNAL
  arm: add support for TIF_NOTIFY_SIGNAL
  microblaze: add support for TIF_NOTIFY_SIGNAL
  hexagon: add support for TIF_NOTIFY_SIGNAL
  csky: add support for TIF_NOTIFY_SIGNAL
  openrisc: add support for TIF_NOTIFY_SIGNAL
  sh: add support for TIF_NOTIFY_SIGNAL
  um: add support for TIF_NOTIFY_SIGNAL
  ...
2020-12-16 12:33:35 -08:00
Linus Torvalds
7a932e5702 asm-generic: cross-architecture timer cleanup
This cleans up two ancient timer features that were never completed in
 the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
 
 There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
 of clocksource implementations, the ARM EBSA110 platform. Rather than
 changing to use modern timekeeping, we remove the platform entirely as
 Russell no longer uses his machine and nobody else seems to have one
 any more.
 
 The conditional code for using arch_gettimeoffset() is removed as
 a result.
 
 For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
 not using clockevent drivers: parisc, ia64, most of m68k, and one
 Arm platform. These all do timer ticks slighly differently, and this
 gets cleaned up to the point they at least all call the same helper
 function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS'
 in Kconfig, the polarity is now reversed, with the few remaining ones
 selecting LEGACY_TIMER_TICK instead.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y1v8ACgkQmmx57+YA
 GNmCvQ/9EDlgCt92r8SB+LGafDtgB8TUQZeIrs9S2mByzdxwnw0lxObIXFCnhQgh
 RpG3dR+ONRDnC5eI149B377JOEFMZWe2+BtYHUHkFARtUEWatslQcz7yAGvVRK/l
 TS/qReb6piKltlzuanF1bMZbjy2OhlaDRcm+OlC3y5mALR33M4emb+rJ6cSdfk3K
 v1iZhrxtfQT77ztesh/oPkPiyQ6kNcz7SfpyYOb6f5VLlml2BZ7YwBSVyGY7urHk
 RL3XqOUP4KKlMEAI8w0E2nvft6Fk+luziBhrMYWK0GvbmI1OESENuX/c6tgT2OQ1
 DRaVHvcPG/EAY8adOKxxVyHhEJDSoz5GJV/EtjlOegsJk6RomczR1uuiT3Kvm7Ah
 PktMKv4xQht1E15KPSKbOvNIEP18w2s5z6gw+jVDv8pw42pVEQManm1D+BICqrhl
 fcpw6T1drf9UxAjwX4+zXtmNs+a+mqiFG8puU4VVgT4GpQ8umHvunXz2WUjZO0jc
 3m8ErJHBvtJwW5TOHGyXnjl9SkwPzHOfF6IcXTYWEDU4/gQIK9TwUvCjLc0lE27t
 FMCV2ds7/K1CXwRgpa5IrefSkb8yOXSbRZ56NqqF7Ekxw4J5bYRSaY7jb+qD/e+3
 5O1y+iPxFrpH+16hSahvzrtcdFNbLQvBBuRtEQOYuHLt2UJrNoU=
 =QpNs
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
 "This cleans up two ancient timer features that were never completed in
  the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.

  There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
  of clocksource implementations, the ARM EBSA110 platform. Rather than
  changing to use modern timekeeping, we remove the platform entirely as
  Russell no longer uses his machine and nobody else seems to have one
  any more.

  The conditional code for using arch_gettimeoffset() is removed as a
  result.

  For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
  not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
  platform. These all do timer ticks slighly differently, and this gets
  cleaned up to the point they at least all call the same helper
  function.

  Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
  Kconfig, the polarity is now reversed, with the few remaining ones
  selecting LEGACY_TIMER_TICK instead"

* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  timekeeping: default GENERIC_CLOCKEVENTS to enabled
  timekeeping: remove xtime_update
  m68k: remove timer_interrupt() function
  m68k: change remaining timers to legacy_timer_tick
  m68k: m68328: use legacy_timer_tick()
  m68k: sun3/sun3c: use legacy_timer_tick
  m68k: split heartbeat out of timer function
  m68k: coldfire: use legacy_timer_tick()
  parisc: use legacy_timer_tick
  ARM: rpc: use legacy_timer_tick
  ia64: convert to legacy_timer_tick
  timekeeping: add CONFIG_LEGACY_TIMER_TICK
  timekeeping: remove arch_gettimeoffset
  net: remove am79c961a driver
  ARM: remove ebsa110 platform
2020-12-16 00:07:17 -08:00
Linus Torvalds
157807123c asm-generic: mmu-context cleanup
This is a cleanup series from Nicholas Piggin, preparing for
 later changes. The asm/mmu_context.h header are generalized
 and common code moved to asm-gneneric/mmu_context.h.
 
 This saves a bit of code and makes it easier to change in
 the future.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y1LsACgkQmmx57+YA
 GNm6kBAAq4/n6nuNnh6b9LhjXaZRG75gEyW7JvHl8KE5wmZHwDHqbwiQgU1b3lUs
 JJGbfKqi5ASKxNg6MpfYodmCOqeTUUYG0FUCb6lMhcxxMdfLTLYBvkNd6Y143M+T
 boi5b/iz+OUQdNPzlVeSsUEVsD59FIXmP/GhscWZN9VAyf/aLV2MDBIOhrDSJlPo
 ObexnP0Iw1E1NRQYDQ6L2dKTHa6XmHyUtw40ABPmd/6MSd1S+D+j3FGg+CYmvnzG
 k9g8FbNby8xtUfc0pZV4W/322WN8cDFF9bc04eTDZiAv1bk9lmfvWJ2bWjs3s2qt
 RO/suiZEOAta/WUX9vVLgYn2td00ef+AyjNUgffiUfvQfl++fiCDFTGl+MoCLjbh
 xQUPcRuRdED7bMKNrC0CcDOSwWEBWVXvkU/szBLDeE1sPjXzGQ80q1Y72k9y961I
 mqg7FrHqjZsxT9luXMAzClHNhXAtvehkJZBIdHlFok83EFoTQp48Da4jaDuOOhlq
 p/lkPJWOHegIQMWtGwRyGmG1qzil7b/QBNAPLgu9pF4TA+ySRBEB2BOr2jRSkj6N
 mNTHQbSYxBoktdt+VhtrSsxR+i8lwlegx+RNRFmKK3VH5da2nfiBaOY7zBQQHxCK
 yxQvXvsljSVpfkFKLc/S2nLQL1zTkRfFKV1Xmd3+3owR+EoqM60=
 =NpMX
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic mmu-context cleanup from Arnd Bergmann:
 "This is a cleanup series from Nicholas Piggin, preparing for later
  changes. The asm/mmu_context.h header are generalized and common code
  moved to asm-gneneric/mmu_context.h.

  This saves a bit of code and makes it easier to change in the future"

* tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits)
  h8300: Fix generic mmu_context build
  m68k: mmu_context: Fix Sun-3 build
  xtensa: use asm-generic/mmu_context.h for no-op implementations
  x86: use asm-generic/mmu_context.h for no-op implementations
  um: use asm-generic/mmu_context.h for no-op implementations
  sparc: use asm-generic/mmu_context.h for no-op implementations
  sh: use asm-generic/mmu_context.h for no-op implementations
  s390: use asm-generic/mmu_context.h for no-op implementations
  riscv: use asm-generic/mmu_context.h for no-op implementations
  powerpc: use asm-generic/mmu_context.h for no-op implementations
  parisc: use asm-generic/mmu_context.h for no-op implementations
  openrisc: use asm-generic/mmu_context.h for no-op implementations
  nios2: use asm-generic/mmu_context.h for no-op implementations
  nds32: use asm-generic/mmu_context.h for no-op implementations
  mips: use asm-generic/mmu_context.h for no-op implementations
  microblaze: use asm-generic/mmu_context.h for no-op implementations
  m68k: use asm-generic/mmu_context.h for no-op implementations
  ia64: use asm-generic/mmu_context.h for no-op implementations
  hexagon: use asm-generic/mmu_context.h for no-op implementations
  csky: use asm-generic/mmu_context.h for no-op implementations
  ...
2020-12-15 23:58:04 -08:00
Linus Torvalds
2cffa11e2a Generic interrupt and irqchips subsystem:
Core:
 
      - Consolidation and robustness changes for irq time accounting
 
      - Cleanup and consolidation of irq stats
 
      - Remove the fasteoi IPI flow which has been proved useless
 
      - Provide an interface for converting legacy interrupt mechanism into
        irqdomains
 
  Drivers:
 
      The rare event of not having completely new chip driver code, just new
      DT bindings and extensions of existing drivers to accomodate new
      variants!
 
      - Preliminary support for managed interrupts on platform devices
 
      - Correctly identify allocation of MSIs proxyied by another device
 
      - Generalise the Ocelot support to new SoCs
 
      - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
 
      - Work around spurious interrupts on Qualcomm PDC
 
      - Random fixes and cleanups
 
 Thanks,
 
 	tglx
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/YwZgTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoW4CD/90rTi1OQrMe3nb5okVjUZmktz/K3BN
 Cl5+evFiXiNoH+yJSMIVP+8eMAtBH6RgoaD0EUtSYmgzb9h/JRRQYwtPxobXcMb2
 2xcWyLPJkVJL431JKNM8BBRYjLA2VnQ6Ia+Kx3BxqpgKXn5+cEMh1dwIy27Ll2rj
 +2NHAQe1sHL7o/KcCDhYqbVIDjw5K/d7YPwjEuPeEoNv1DOxrOCdCEfgFN0jBtRE
 CoaRTBskeAaHIzHNp47Mxyz43g4tA/D8kB68X0OjpEykVkPUbgNK1FHSwaPbIsFT
 FTSPU3zg8Q6DZ+RGyjNJykIFgUbirlJxARk2c6Ct8Kc3DN6K1jQt4EsU7CXRCc98
 BTBjUNeFeNj3irZ4GHhyMKOQJCA1Z5nCRfBUGiW6gK8183us3BLfH5DM1zEsAYUh
 DCp+UKsLuXhbB80EWq7kl82/2mNGZ8En8EerE6XJA7Z3JN8FplOHEuLezYYzwzbb
 RIes971Vc50J2u2Wf/M2c3PDz3D/4FzfwUeA4LJfTnmOL09RYZ8CsqSckpx4ku/F
 XiBnjwtGEpDXWJ8z13DC7yONrxFGByV19+sqHTBlub5DmIs0gXjhC0dKAPAruUIS
 iCC+Vx6xLgOpTDu8shFsjibbi9Hb6vuZrF2Te+WR5Rf7d80C0J4b5K5PS4daUjr6
 IuD2tz+3CtPjHw==
 =iytv
 -----END PGP SIGNATURE-----

Merge tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "Generic interrupt and irqchips subsystem updates. Unusually, there is
  not a single completely new irq chip driver, just new DT bindings and
  extensions of existing drivers to accomodate new variants!

  Core:

   - Consolidation and robustness changes for irq time accounting

   - Cleanup and consolidation of irq stats

   - Remove the fasteoi IPI flow which has been proved useless

   - Provide an interface for converting legacy interrupt mechanism into
     irqdomains

  Drivers:

   - Preliminary support for managed interrupts on platform devices

   - Correctly identify allocation of MSIs proxyied by another device

   - Generalise the Ocelot support to new SoCs

   - Improve GICv4.1 vcpu entry, matching the corresponding KVM
     optimisation

   - Work around spurious interrupts on Qualcomm PDC

   - Random fixes and cleanups"

* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
  driver core: platform: Add devm_platform_get_irqs_affinity()
  ACPI: Drop acpi_dev_irqresource_disabled()
  resource: Add irqresource_disabled()
  genirq/affinity: Add irq_update_affinity_desc()
  irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
  irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
  platform-msi: Track shared domain allocation
  irqchip/ti-sci-intr: Fix freeing of irqs
  irqchip/ti-sci-inta: Fix printing of inta id on probe success
  drivers/irqchip: Remove EZChip NPS interrupt controller
  Revert "genirq: Add fasteoi IPI flow"
  irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
  irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
  irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
  irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
  irqchip/ocelot: Add support for Jaguar2 platforms
  irqchip/ocelot: Add support for Serval platforms
  irqchip/ocelot: Add support for Luton platforms
  irqchip/ocelot: prepare to support more SoC
  ...
2020-12-15 15:03:31 -08:00
Thomas Gleixner
3c41e57a1e irqchip updates for Linux 5.11
- Preliminary support for managed interrupts on platform devices
 - Correctly identify allocation of MSIs proxyied by another device
 - Remove the fasteoi IPI flow which has been proved useless
 - Generalise the Ocelot support to new SoCs
 - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
 - Work around spurious interrupts on Qualcomm PDC
 - Random fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl/Uxq8PHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDoW0P/0ZMDvFPxrfnJD46exUgUOPuuFF8jZxAlxD8
 7UExqar7u6yX7bbq394jPgtOOxldDagfCx/jCXgb9ja7DK5EHKRcrfjaDT8knHi2
 Keg5RaRMRi9TVltvWQTxAkXwSv0Atl881qqsndPeZCez0GNZp+HB34s+rNkZwBOu
 MBrWihMQOSv5QE6milsNc7HXLSHM1eLZ7Y2XgumNtKrIGEX9yZI7qwdMofwP8Za3
 ayMOvc1WAWaTJI7Mg5ac1yTCVbqLmRHhCtws6c6DMgaRu6SI0itmbpQzkDuJJIe3
 k9h4KQPaKAFcQsoo3GV0MKTMm63eq82XT3CAdv+htYRY1z95D2+nzNK+mJtsGptX
 gJ2zeJkUb4u+yVtNguL9qjo5ssCXV/6IybJxv6baaEFnSwQMUwqa066NdxmtqfIe
 1BOWnc153a7SRbQ34M9/llje+v8YJbueGMS2RFR2LQ6IjjpaHsXh+YCZokfA/kdk
 zGbOUD5WWFtFD1T3UoaJ4gFt+pzHjNqym4CcEj4S1Vf5y+POUkNmC+GYK+xfm2Fp
 WJMbdIUxJhHFRD9L1ShtfAVUSbp712VOOdILp9rYAkOdqfb51BVUiMUP++s2dGp1
 ZIT78qt7kTKT1CxbDdFAjzsi7RoMqdSGYgKmG4sVprELeZnFwq47nBkBr8XEQ1TT
 0ccEUOY8
 =7Z24
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates for 5.11 from Marc Zyngier:

  - Preliminary support for managed interrupts on platform devices
  - Correctly identify allocation of MSIs proxyied by another device
  - Remove the fasteoi IPI flow which has been proved useless
  - Generalise the Ocelot support to new SoCs
  - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
  - Work around spurious interrupts on Qualcomm PDC
  - Random fixes and cleanups

Link: https://lore.kernel.org/r/20201212135626.1479884-1-maz@kernel.org
2020-12-15 10:48:07 +01:00
Linus Torvalds
edd7ab7684 The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic implementation
     which builds the base for the kmap_local() API and make the
     kmap_atomic() interface wrappers which handle the disabling/enabling of
     preemption and pagefaults.
 
   - Switch the storage from per-CPU to per task and provide scheduler
     support for clearing mapping when scheduling out and restoring them
     when scheduling back in.
 
   - Merge the migrate_disable/enable() code, which is also part of the
     scheduler pull request. This was required to make the kmap_local()
     interface available which does not disable preemption when a mapping
     is established. It has to disable migration instead to guarantee that
     the virtual address of the mapped slot is the same accross preemption.
 
   - Provide better debug facilities: guard pages and enforced utilization
     of the mapping mechanics on 64bit systems when the architecture allows
     it.
 
   - Provide the new kmap_local() API which can now be used to cleanup the
     kmap_atomic() usage sites all over the place. Most of the usage sites
     do not require the implicit disabling of preemption and pagefaults so
     the penalty on 64bit and 32bit non-highmem systems is removed and quite
     some of the code can be simplified. A wholesale conversion is not
     possible because some usage depends on the implicit side effects and
     some need to be cleaned up because they work around these side effects.
 
     The migrate disable side effect is only effective on highmem systems
     and when enforced debugging is enabled. On 64bit and 32bit non-highmem
     systems the overhead is completely avoided.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/XyQwTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoUolD/9+R+BX96fGir+I8rG9dc3cbLw5meSi
 0I/Nq3PToZMs2Iqv50DsoaPYHHz/M6fcAO9LRIgsE9jRbnY93GnsBM0wU9Y8yQaT
 4wUzOG5WHaLDfqIkx/CN9coUl458oEiwOEbn79A2FmPXFzr7IpkufnV3ybGDwzwP
 p73bjMJMPPFrsa9ig87YiYfV/5IAZHi82PN8Cq1v4yNzgXRP3Tg6QoAuCO84ZnWF
 RYlrfKjcJ2xPdn+RuYyXolPtxr1hJQ0bOUpe4xu/UfeZjxZ7i1wtwLN9kWZe8CKH
 +x4Lz8HZZ5QMTQ9sCHOLtKzu2MceMcpISzoQH4/aFQCNMgLn1zLbS790XkYiQCuR
 ne9Cua+IqgYfGMG8cq8+bkU9HCNKaXqIBgPEKE/iHYVmqzCOqhW5Cogu4KFekf6V
 Wi7pyyUdX2en8BAWpk5NHc8de9cGcc+HXMq2NIcgXjVWvPaqRP6DeITERTZLJOmz
 XPxq5oPLGl7wdm7z+ICIaNApy8zuxpzb6sPLNcn7l5OeorViORlUu08AN8587wAj
 FiVjp6ZYomg+gyMkiNkDqFOGDH5TMENpOFoB0hNNEyJwwS0xh6CgWuwZcv+N8aPO
 HuS/P+tNANbD8ggT4UparXYce7YCtgOf3IG4GA3JJYvYmJ6pU+AZOWRoDScWq4o+
 +jlfoJhMbtx5Gg==
 =n71I
 -----END PGP SIGNATURE-----

Merge tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull kmap updates from Thomas Gleixner:
 "The new preemtible kmap_local() implementation:

   - Consolidate all kmap_atomic() internals into a generic
     implementation which builds the base for the kmap_local() API and
     make the kmap_atomic() interface wrappers which handle the
     disabling/enabling of preemption and pagefaults.

   - Switch the storage from per-CPU to per task and provide scheduler
     support for clearing mapping when scheduling out and restoring them
     when scheduling back in.

   - Merge the migrate_disable/enable() code, which is also part of the
     scheduler pull request. This was required to make the kmap_local()
     interface available which does not disable preemption when a
     mapping is established. It has to disable migration instead to
     guarantee that the virtual address of the mapped slot is the same
     across preemption.

   - Provide better debug facilities: guard pages and enforced
     utilization of the mapping mechanics on 64bit systems when the
     architecture allows it.

   - Provide the new kmap_local() API which can now be used to cleanup
     the kmap_atomic() usage sites all over the place. Most of the usage
     sites do not require the implicit disabling of preemption and
     pagefaults so the penalty on 64bit and 32bit non-highmem systems is
     removed and quite some of the code can be simplified. A wholesale
     conversion is not possible because some usage depends on the
     implicit side effects and some need to be cleaned up because they
     work around these side effects.

     The migrate disable side effect is only effective on highmem
     systems and when enforced debugging is enabled. On 64bit and 32bit
     non-highmem systems the overhead is completely avoided"

* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  ARM: highmem: Fix cache_is_vivt() reference
  x86/crashdump/32: Simplify copy_oldmem_page()
  io-mapping: Provide iomap_local variant
  mm/highmem: Provide kmap_local*
  sched: highmem: Store local kmaps in task struct
  x86: Support kmap_local() forced debugging
  mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
  mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
  microblaze/mm/highmem: Add dropped #ifdef back
  xtensa/mm/highmem: Make generic kmap_atomic() work correctly
  mm/highmem: Take kmap_high_get() properly into account
  highmem: High implementation details and document API
  Documentation/io-mapping: Remove outdated blurb
  io-mapping: Cleanup atomic iomap
  mm/highmem: Remove the old kmap_atomic cruft
  highmem: Get rid of kmap_types.h
  xtensa/mm/highmem: Switch to generic kmap atomic
  sparc/mm/highmem: Switch to generic kmap atomic
  powerpc/mm/highmem: Switch to generic kmap atomic
  nds32/mm/highmem: Switch to generic kmap atomic
  ...
2020-12-14 18:35:53 -08:00
Johannes Berg
1fb1abc836 um: Fix build w/o CONFIG_PM_SLEEP
uml_pm_wake() is unconditionally called from the SIGUSR1 wakeup
handler since that's in the userspace portion of UML, and thus
a bit tricky to ifdef out. Since pm_system_wakeup() can always
be called (but may be an empty inline), also simply always have
uml_pm_wake() to fix the build.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-14 21:15:32 +01:00
Johannes Berg
11385539c0 um: time-travel: Correct time event IRQ delivery
Lockdep (on 5.10-rc) points out that we're delivering IRQs while IRQs
are not even enabled, which clearly shouldn't happen. Defer the time
event IRQ delivery until they actually are enabled.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:42:06 +01:00
Johannes Berg
cae20ba0a1 um: irq/sigio: Support suspend/resume handling of workaround IRQs
If the sigio workaround needed to be applied to a file descriptor,
set_irq_wake() wouldn't work for it since it would get polled by
the thread instead of causing SIGIO, and thus could never really
cause a wakeup, since the thread notification FD wasn't marked as
being able to wake up the system.

Fix this by marking the thread's notification FD explicitly as a
wake source FD, i.e. not suppressing SIGIO for it in suspend. In
order to not cause spurious wakeups, we then need to remove all
FDs that shouldn't wake up the system from the polling thread. In
order to do this, add unlocked versions of ignore_sigio_fd() and
add_sigio_fd() (nothing else is happening in suspend, so this is
fine), and also modify ignore_sigio_fd() to return -ENOENT if the
FD wasn't originally in there. This doesn't matter because nothing
else currently checks the return value, but the irq code needs to
know which ones to restore the workaround for.

All told, this lets us use a timerfd for the RTC clock in the next
patch, which doesn't send SIGIO.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:42:01 +01:00
Johannes Berg
452f94cecf um: time-travel: Actually apply "free-until" optimisation
Due a bug - we never checked the time_travel_ext_free_until value - we
were always requesting time for every single scheduling. This adds up
since we make reading time cost 256ns, and it's a fairly common call.
Fix this.

While at it, also make reading time only cost something when we're not
currently waiting for our scheduling turn - otherwise things get mixed
up in a very confusing way. We should never get here, since we're not
actually running, but it's possible if you stick printk() or such into
the virtio code that must handle the external interrupts.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:41:56 +01:00
Anton Ivanov
9431f7c199 um: chan_xterm: Fix fd leak
xterm serial channel was leaking a fd used in setting up the
port helper

This bug is prehistoric - it predates switching to git. The "fixes"
header here is really just to mark all the versions we would like this to
apply to which is "Anything from the Cretaceous period onwards".

No dinosaurs were harmed in fixing this bug.

Fixes: b40997b872 ("um: drivers/xterm.c: fix a file descriptor leak")
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:38:28 +01:00
Anton Ivanov
9b1c0c0e25 um: tty: Fix handling of close in tty lines
Fix a logical error in tty reading. We get 0 and errno == EAGAIN
on the first attempt to read from a closed file descriptor.

Compared to that a true EAGAIN is EAGAIN and -1.

If we check errno for EAGAIN first, before checking the return
value we miss the fact that the descriptor is closed.

This bug is as old as the driver. It was not showing up with
the original POLL based IRQ controller, because it was
producing multiple events. Switching to EPOLL unmasked it.

Fixes: ff6a17989c ("Epoll based IRQ controller")
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:38:28 +01:00
Anton Ivanov
e3a01cbee9 um: Monitor error events in IRQ controller
Ensure that file closes, connection closes, etc are propagated
as interrupts in the interrupt controller.

Fixes: ff6a17989c ("Epoll based IRQ controller")
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:38:28 +01:00
Johannes Berg
ef4459a6da um: allocate a guard page to helper threads
We've been running into stack overflows in helper threads
corrupting memory (e.g. because somebody put printf() or
os_info() there), so to avoid those causing hard-to-debug
issues later on, allocate a guard page for helper thread
stacks and mark it read-only.

Unfortunately, the crash dump at that point is useless as
the stack tracer will try to backtrace the *kernel* thread,
not the helper thread, but at least we don't survive to a
random issue caused by corruption.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:38:06 +01:00
Johannes Berg
963285b0b4 um: support some of ARCH_HAS_SET_MEMORY
For now, only support set_memory_ro()/rw() which we need for
the stack protection in the next patch.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:38:06 +01:00
Johannes Berg
58b09f6869 um: time-travel: avoid multiple identical propagations
If there is some kind of interrupt negotation or such then
it may happen that we send an update message multiple times,
avoid that in the interest of efficiency by storing the last
transmitted value and only sending a new update if it's not
the same as the last update.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:38:06 +01:00
Anton Ivanov
3c6ac61bc9 um: Fetch registers only for signals which need them
UML userspace fetches siginfo and passes it to signal handlers
in UML. This is needed only for some of the signals, because
key handlers like SIGIO make no use of this variable.

Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:38:06 +01:00
Johannes Berg
a374b7cb1e um: Support suspend to RAM
With all the previous bits in place, we can now also support
suspend to RAM, in the sense that everything is suspended,
not just most, including userspace, processes like in s2idle.

Since um_idle_sleep() now waits forever, we can simply call
that to "suspend" the system.

As before, you can wake it up using SIGUSR1 since we're just
in a pause() call that only needs to return.

In order to implement selective resume from certain devices,
and not have any arbitrary device interrupt wake up, suspend
interrupts by removing SIGIO notification (O_ASYNC) from all
the FDs that are not supposed to wake up the system. However,
swap out the handler so we don't actually handle the SIGIO as
an interrupt.

Since we're in pause(), the mere act of receiving SIGIO wakes
us up, and then after things have been restored enough, re-set
O_ASYNC for all previously suspended FDs, reinstall the proper
SIGIO handler, and send SIGIO to self to process anything that
might now be pending.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:22:49 +01:00
Johannes Berg
92dcd3d318 um: Allow PM with suspend-to-idle
In order to be able to experiment with suspend in UML, add the
minimal work to be able to suspend (s2idle) an instance of UML,
and be able to wake it back up from that state with the USR1
signal sent to the main UML process.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:22:46 +01:00
Johannes Berg
2701c1bd91 um: time: Fix read_persistent_clock64() in time-travel
In time-travel mode, we've relied on read_persistent_clock64()
being called only once at system startup, but this is both the
right thing to call from the pseudo-RTC, and also gets called
by the timekeeping core during suspend/resume.

Thus, fix this to always fall make use of the time_travel_time
in any time-travel mode, initializing time_travel_start at boot
to the right value depending on the time-travel mode.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:22:41 +01:00
Johannes Berg
49da38a3ef um: Simplify os_idle_sleep() and sleep longer
There really is no reason to pass the amount of time we should
sleep, especially since it's just hard-coded to one second.

Additionally, one second isn't really all that long, and as we
are expecting to be woken up by a signal, we can sleep longer
and avoid doing some work every second, so replace the current
clock_nanosleep() with just an empty select() that can _only_
be woken up by a signal.

We can also remove the deliver_alarm() since we don't need to
do that when we got e.g. SIGIO that woke us up, and if we got
SIGALRM the signal handler will actually (have) run, so it's
just unnecessary extra work.

Similarly, in time-travel mode, just program the wakeup event
from idle to be S64_MAX, which is basically the most you could
ever simulate to. Of course, you should already have an event
in the list that's earlier and will cause a wakeup, normally
that's the regular timer interrupt, though in suspend it may
(later) also be an RTC event. Since actually getting to this
point would be a bug and you can't ever get out again, panic()
on it in the time control code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:22:37 +01:00
Johannes Berg
3032b94587 um: Simplify IRQ handling code
Reduce dynamic allocations (and thereby cache misses) by simply
embedding the registration data for IRQs in the irq_entry, we
never supported these being really dynamic anyway as only one
was ever allowed ("Trying to reregister ...").

Lockless behaviour is preserved by removing the FD from the poll
set appropriately, but we use reg->events to indicate whether or
not this entry is used, rather than dynamically allocating them.

Also port the list of IRQ entries to list_head instead of the
current open-coded singly-linked list implementation, just for
sanity.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:22:33 +01:00
Johannes Berg
2fccfcc0c7 um: Remove IRQ_NONE type
We don't actually use this in um_request_irq(), so it can
never be assigned. It's also not clear what that would be
useful for, so just remove it.

This results in quite a number of cleanups, all the way to
removing the "SIGIO on close" startup check, since the data
it assigns (pty_close_sigio) is not used anymore.

While at it, also make this an enum so we get a minimum of
type checking, and remove the IRQ_NONE hack in virtio since
we now no longer have the name twice.

Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:22:29 +01:00
Johannes Berg
0737402f42 um: irq: Reduce irq_reg allocation
We don't need an array of 4 entries to capture three and the
name 'MAX_IRQ_TYPE' really gets confusing as well. Remove it
and add a correct NUM_IRQ_TYPES, and use that correctly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:22:23 +01:00
Johannes Berg
458e1f7da0 um: irq: Clean up and rename struct irq_fd
This really shouldn't be called "irq_fd" since it doesn't
carry an fd. Well, it used to, apparently, but that struct
member is unused.

Rename it to "irq_reg" since it more accurately reflects a
registered interrupt, and remove the unused 'next' and 'fd'
members from the struct as well.

While at it, also move it to the implementation, it's not
used anywhere else, and the header file is shared with the
userspace components.

Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:22:19 +01:00
Johannes Berg
0ede3c05ee um: Clean up alarm IRQ chip name
We don't use "SIGVTALRM", it's just SIGALRM. Clean up the naming.
While at it, fix the comment's grammar.

Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:22:15 +01:00
Johannes Berg
aaf5800e24 um: virtio: Use dynamic IRQ allocation
This separates the devices, which is better for debug and for
later suspend/resume and wakeup support, since there we'll
have to separate which IRQs can wake up the system and which
cannot.

Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:22:11 +01:00
Johannes Berg
36d46a5907 um: Support dynamic IRQ allocation
It's cumbersome and error-prone to keep adding fixed IRQ numbers,
and for proper device wakeup support for the virtio/vhost-user
support we need to have different IRQs for each device. Even if
in theory two IRQs (with and without wake) might be sufficient,
it's much easier to reason about it when we have dynamic number
assignment. It also makes it easier to add new devices that may
dynamically exist or depending on the configuration, etc.

Add support for this, up to 64 IRQs (the same limit as epoll FDs
we have right now). Since it's not easy to port all the existing
places to dynamic allocation (some data is statically initialized)
keep the low numbers are reserved for the existing hard-coded IRQ
numbers.

Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:22:08 +01:00
Johannes Berg
d66c91836b um: sigio: Return error from add_sigio_fd()
If we run out of space, return an error instead of 0.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:22:01 +01:00
Christopher Obbard
ef3ba87cb7 um: ubd: Set device serial attribute from cmdline
Adds the ability to set the UBD device serial number from the
commandline, disabling the serial number functionality by default.

In some cases it may be useful to set a serial to the UBD device, such
that downstream users (i.e. udev) can use this information to better
describe the hardware to the user from the UML cmdline. In our case we
use this parameter to create some entries under /dev/disk/by-ubd-id/
for each of the UBD devices passed through the UML cmdline.

Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:22:01 +01:00
Andy Shevchenko
517f60206e um: Increase stack frame size threshold for signal.c
The signal.c can't use heap for bit data located on stack. However,
by default a compiler warns us about overstepping stack frame size
threshold:

arch/um/os-Linux/signal.c: In function ‘sig_handler_common’:
arch/um/os-Linux/signal.c:51:1: warning: the frame size of 2960 bytes is larger than 2048 bytes [-Wframe-larger-than=]
   51 | }
      | ^
arch/um/os-Linux/signal.c: In function ‘timer_real_alarm_handler’:
arch/um/os-Linux/signal.c:95:1: warning: the frame size of 2960 bytes is larger than 2048 bytes [-Wframe-larger-than=]
    95 | }
       | ^

Due to above increase stack frame size threshold explicitly for signal.c
to avoid unnecessary warning.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:22:00 +01:00
Johannes Berg
f4ab7818ef um: line: Don't free winch (with IRQ) under spinlock
Lockdep correctly complains that one shouldn't call um_free_irq()
with free_irq() inside under a spinlock since that will attempt
to acquire a mutex.

Rearrange the code to keep the list manipulations under the lock
while moving the actual freeing outside of it, to avoid this.

In particular, this removes the lockdep complaint at shutdown that
I was seeing with lockdep enabled.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: anton.ivanov@cambridgegreys.com
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:21:55 +01:00
Gabriel Krisman Bertazi
fc6b6a872d um: ubd: Submit all data segments atomically
Internally, UBD treats each physical IO segment as a separate command to
be submitted in the execution pipe.  If the pipe returns a transient
error after a few segments have already been written, UBD will tell the
block layer to requeue the request, but there is no way to reclaim the
segments already submitted.  When a new attempt to dispatch the request
is done, those segments already submitted will get duplicated, causing
the WARN_ON below in the best case, and potentially data corruption.

In my system, running a UML instance with 2GB of RAM and a 50M UBD disk,
I can reproduce the WARN_ON by simply running mkfs.fvat against the
disk on a freshly booted system.

There are a few ways to around this, like reducing the pressure on
the pipe by reducing the queue depth, which almost eliminates the
occurrence of the problem, increasing the pipe buffer size on the host
system, or by limiting the request to one physical segment, which causes
the block layer to submit way more requests to resolve a single
operation.

Instead, this patch modifies the format of a UBD command, such that all
segments are sent through a single element in the communication pipe,
turning the command submission atomic from the point of view of the
block layer.  The new format has a variable size, depending on the
number of elements, and looks like this:

+------------+-----------+-----------+------------
| cmd_header | segment 0 | segment 1 | segment ...
+------------+-----------+-----------+------------

With this format, we push a pointer to cmd_header in the submission
pipe.

This has the advantage of reducing the memory footprint of executing a
single request, since it allow us to merge some fields in the header.
It is possible to reduce even further each segment memory footprint, by
merging bitmap_words and cow_offset, for instance, but this is not the
focus of this patch and is left as future work.  One issue with the
patch is that for a big number of segments, we now perform one big
memory allocation instead of multiple small ones, but I wasn't able to
trigger any real issues or -ENOMEM because of this change, that wouldn't
be reproduced otherwise.

This was tested using fio with the verify-crc32 option, and by running
an ext4 filesystem over this UBD device.

The original WARN_ON was:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0x13f/0x141
refcount_t: underflow; use-after-free.
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.5.0-rc6-00002-g2a5bb2cf75c8 #346
Stack:
 6084eed0 6063dc77 00000009 6084ef60
 00000000 604b8d9f 6084eee0 6063dcbc
 6084ef40 6006ab8d e013d780 1c00000000
Call Trace:
 [<600a0c1c>] ? printk+0x0/0x94
 [<6004a888>] show_stack+0x13b/0x155
 [<6063dc77>] ? dump_stack_print_info+0xdf/0xe8
 [<604b8d9f>] ? refcount_warn_saturate+0x13f/0x141
 [<6063dcbc>] dump_stack+0x2a/0x2c
 [<6006ab8d>] __warn+0x107/0x134
 [<6008da6c>] ? wake_up_process+0x17/0x19
 [<60487628>] ? blk_queue_max_discard_sectors+0x0/0xd
 [<6006b05f>] warn_slowpath_fmt+0xd1/0xdf
 [<6006af8e>] ? warn_slowpath_fmt+0x0/0xdf
 [<600acc14>] ? raw_read_seqcount_begin.constprop.0+0x0/0x15
 [<600619ae>] ? os_nsecs+0x1d/0x2b
 [<604b8d9f>] refcount_warn_saturate+0x13f/0x141
 [<6048bc8f>] refcount_sub_and_test.constprop.0+0x2f/0x37
 [<6048c8de>] blk_mq_free_request+0xf1/0x10d
 [<6048ca06>] __blk_mq_end_request+0x10c/0x114
 [<6005ac0f>] ubd_intr+0xb5/0x169
 [<600a1a37>] __handle_irq_event_percpu+0x6b/0x17e
 [<600a1b70>] handle_irq_event_percpu+0x26/0x69
 [<600a1bd9>] handle_irq_event+0x26/0x34
 [<600a1bb3>] ? handle_irq_event+0x0/0x34
 [<600a5186>] ? unmask_irq+0x0/0x37
 [<600a57e6>] handle_edge_irq+0xbc/0xd6
 [<600a131a>] generic_handle_irq+0x21/0x29
 [<60048f6e>] do_IRQ+0x39/0x54
 [...]
---[ end trace c6e7444e55386c0f ]---

Cc: Christopher Obbard <chris.obbard@collabora.com>
Reported-by: Martyn Welch <martyn@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:21:55 +01:00
Johannes Berg
ff9632d2a6 um: Fix time-travel mode
Since the time-travel rework, basic time-travel mode hasn't worked
properly, but there's no longer a need for this WARN_ON() so just
remove it and thereby fix things.

Cc: stable@vger.kernel.org
Fixes: 4b786e24ca ("um: time-travel: Rewrite as an event scheduler")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:21:46 +01:00
Anton Ivanov
97be7ceaf7 um: Remove use of asprinf in umid.c
asprintf is not compatible with the existing uml memory allocation
mechanism. Its use on the "user" side of UML results in a corrupt slab
state.

Fixes: 0d4e5ac7e7 ("um: remove uses of variable length arrays")
Cc: stable@vger.kernel.org
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:21:07 +01:00
Jens Axboe
09041c92f0 um: Add support for TIF_NOTIFY_SIGNAL
Wire up TIF_NOTIFY_SIGNAL handling for um.

Cc: linux-um@lists.infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:21:02 +01:00
Christopher Obbard
72d3e093af um: random: Register random as hwrng-core device
The UML random driver creates a dummy device under the guest,
/dev/hw_random. When this file is read from the guest, the driver
reads from the host machine's /dev/random, in-turn reading from
the host kernel's entropy pool. This entropy pool could have been
filled by a hardware random number generator or just the host
kernel's internal software entropy generator.

Currently the driver does not fill the guests kernel entropy pool,
this requires a userspace tool running inside the guest (like
rng-tools) to read from the dummy device provided by this driver,
which then would fill the guest's internal entropy pool.

This all seems quite pointless when we are already reading from an
entropy pool, so this patch aims to register the device as a hwrng
device using the hwrng-core framework. This not only improves and
cleans up the driver, but also fills the guest's entropy pool
without having to resort to using extra userspace tools in the guest.

This is typically a nuisance when booting a guest: the random pool
takes a long time (~200s) to build up enough entropy since the dummy
hwrng is not used to fill the guest's pool.

This port was originally attempted by Alexander Neville "dark" (in CC,
discussion in Link), but the conversation there stalled since the
handling of -EAGAIN errors were no removed and longer handled by the
driver. This patch attempts to use the existing method of error
handling but utilises the new hwrng core.

The issue can be noticed when booting a UML guest:

    [    2.560000] random: fast init done
    [  214.000000] random: crng init done

With the patch applied, filling the pool becomes a lot quicker:

    [    2.560000] random: fast init done
    [   12.000000] random: crng init done

Cc: Alexander Neville <dark@volatile.bz>
Link: https://lore.kernel.org/lkml/20190828204609.02a7ff70@TheDarkness/
Link: https://lore.kernel.org/lkml/20190829135001.6a5ff940@TheDarkness.local/
Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:20:58 +01:00
Allen Pais
db03b42827 um: Convert tasklets to use new tasklet_setup() API
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13 22:20:51 +01:00
Linus Torvalds
f91a3aa6bc Yet two more places which invoke tracing from RCU disabled regions in the
idle path. Similar to the entry path the low level idle functions have to
 be non-instrumentable.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/DpAUTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoXSLD/9klc0YimnEnROW6Q5Svb2IcyIutmXF
 bOIY1bYYoKILOBj3wyvDUhmdMuq5zh7H9yG11hO8MaVVWVQcLcOMLdHTYm9dcdmF
 xQk33+xqjuhRShB+nEmC9ayYtWogtH6W6uZ6WDtF9ZltMKU85n5ddGJ/Fvo+HoCb
 NbOdHGJdJ3/3ZCeHnxOnxM+5/GwjkBuccTV/tXmb3yXrfU9DBySyQ4/UchcpF43w
 LcEb0kiQbpZsBTByKJOQV8+RR654S0sILlvRwVXpmj94vrgGwhlVk1/9rz7tkOhF
 ksoo1mTVu75LMt22G/hXxE63787yRvFdHjapf0+kCOAuhl992NK+xlGDH8o9DXcu
 9y73D4bI0HnDFs20w6vs20iLvxECJiYHJqlgR5ZwFUToceaNgtiYr8kzuD7Zbae1
 KG2E7BuNSwHWMtf97fGn44GZknPEOaKdDn4Wv6/bvKHxLm77qe11RKF70Stcz2AI
 am13KmQzzsHGF5qNWwpElRUxSdxfJMR66RnOdTQULGrRedaZTFol/y2pnVzTSe3k
 SZnlpL5kE7y92UYDogPb5wWA7b+YkJN0OdSkRFy1FH26ZG8E4M7ZJ2tql5Sw7pGM
 lsTjXpAUphnK5rz7QcYE8KAZWj//fIAcElIrvdklVcBnS3IqjfksYW27B64133vx
 cT1B/lA1PHXj6Q==
 =raED
 -----END PGP SIGNATURE-----

Merge tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
 "Two more places which invoke tracing from RCU disabled regions in the
  idle path.

  Similar to the entry path the low level idle functions have to be
  non-instrumentable"

* tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  intel_idle: Fix intel_idle() vs tracing
  sched/idle: Fix arch_cpu_idle() vs tracing
2020-11-29 11:19:26 -08:00
Peter Zijlstra
58c644ba51 sched/idle: Fix arch_cpu_idle() vs tracing
We call arch_cpu_idle() with RCU disabled, but then use
local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.

Switch all arch_cpu_idle() implementations to use
raw_local_irq_{en,dis}able() and carefully manage the
lockdep,rcu,tracing state like we do in entry.

(XXX: we really should change arch_cpu_idle() to not return with
interrupts enabled)

Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org
2020-11-24 16:47:35 +01:00