Commit Graph

1056 Commits

Author SHA1 Message Date
Simon Wood
c9e4d87758 HID: hid-sony: fix endiannes of Sixaxis accel/gyro values
The accelerometers/gyro on the Sixaxis are reported in the wrong
endianness (ie. not compatible with HID), so this patch intercepts
the report and swaps the appropriate bytes over.

Accelerometers are scaled with a nominal value of +/-4000 = 1G,
maximum value would be around +/-32768 = 8G.

Gyro on my device always reports -32768, might need some calibration
set within the controller.

Fix extracted from previous patch submission:
https://patchwork.kernel.org/patch/95212/

Signed-off-by: Marcin Tolysz <tolysz@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13 13:21:30 +02:00
Simon Wood
61ab44bebd HID: hid-sony: amend Sixaxis descriptor to enable accelerometers
Modify the HID descriptor of the Sixaxis controller to allow the
reporting of the accelerometers and gyro via a joystick axis.

Rewrite section from offset 83:
--
0x75, 0x08,         /* Report Size (8),         */
/* all the other data lumped together */
0x95, 0x27,         /* Report Count (39),       */
0x09, 0x01,         /* Usage (Pointer),         */
0x81, 0x02,         /* Input (Variable),        */
0x75, 0x08,         /* Report Size (8),         */
0x95, 0x30,         /* Report Count (48),       */
0x09, 0x01,         /* Usage (Pointer),         */
/* Note Output */
0x91, 0x02,         /* Output (Variable),       */
0x75, 0x08,         /* Report Size (8),         */
0x95, 0x30,         /* Report Count (48),       */
0x09, 0x01,         /* Usage (Pointer),         */
/* Note Feature */
0xB1, 0x02,         /* Feature (Variable),      */
--
with
--
/* last 2 not used... */
0x95, 0x13,         /* Report Count (19),       */
0x09, 0x01,         /* Usage (Pointer),         */
0x81, 0x02,         /* Input (Variable),        */
/* Padding */
0x95, 0x0C,         /* Report Count (12),       */
0x81, 0x01,         /* Input (Constant),        */
0x75, 0x10,         /* Report Size (16),        */
0x95, 0x04,         /* Report Count (4),        */
0x26, 0xFF, 0x03,   /* Logical Maximum (1023),  */
0x46, 0xFF, 0x03,   /* Physical Maximum (1023), */
0x09, 0x01,         /* Usage (Pointer),         */
0x81, 0x02,         /* Input (Variable),        */
--

Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13 13:20:06 +02:00
Stefan Achatz
901e64dbdb HID: roccat: fix NULL pointer dereference, add range checks
On rare occassions raw events can be triggered before drvdata gets set up
which leads to NULL pointer dereferences. This was only observed with pyra on
2.6.39, but is fixed for all devices now to play it save.
kovaplus returned wrong actual values when profile change was initiated from host.
Added range checks for setting actual profile on all devices.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13 13:06:23 +02:00
Stefan Achatz
1edd5b42a6 HID: roccat: correction and cleanup of HID feature reports
Removed analog feature report enums and modified code in roccat_common
to reflect this. Non standard conform Kone got its own copy of the old
code. That helps extracting more generalizations for newer devices.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13 12:52:57 +02:00
Stefan Achatz
303f272c1f HID: roccat: chang Kconfig menu to submenu for roccat devices
As module roccat is needed by all devices, it's the toplevel
menu entry with all devices dependent.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13 12:51:53 +02:00
Stefan Achatz
6d1dec85af HID: roccat: Add "Roccat Talk" support for koneplus
Added binary sysfs attribute to support new functionality the manufacturer
added to koneplus.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13 12:50:40 +02:00
Benjamin Tissoires
b84bd27fe7 HID: hid-multitouch: fix broken eGalax
Since the inclusion of eGalax devices in 2.6.39, I've got some
bug reports for 480d and other devices.
The problem lies in the reports descriptors: eGalax supports both
pen and fingers, and so the reports descriptors contained both.
But hid-multitouch relies on them to detect the last item in each
field to send the multitouch events. In 480d, the last item is not
Y as it should but Pressure. That means that the fields are not
aligned and X,Y are at 0,0 (the other touch coordinates of the report).

With this patch, the detection is made only when the field ContactID
has been detected inside the collection.

There is still a problem with the detections of the range as stylus
and fingers may not have the same min/max, but it's a start.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-12 23:59:23 +02:00
Stefan Kriwanek
74bc695313 HID: Add driver to fix Speedlink VAD Cezanne support
Speedlink VAD Cezanne have a hardware bug that makes the cursor "jump" from one
place to another every now and then. The issue are relative motion events
erroneously reported by the device, each having a distance value of +256. This
256 can in fact never occur due to real motion, therefore those events can
safely be ignored.  The driver also drops useless EV_REL events with a value of
0, that the device sends every time it sends an "real" EV_REL or EV_KEY event.

Signed-off-by: Stefan Kriwanek <mail@stefankriwanek.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-08 09:45:37 +02:00
Michael Bauer
dc0a4f0ce2 HID: Fix Logitech Driving Force Pro wheel
- Add the quirk "NOGET" to make the wheel work at all in native mode.
- Replace the somehow broken report descriptor with a custom one to have
  separate throttle and brake axes.

As there are significant differences in the descriptor (original descriptor
"hides" the separate axes in a  24 bit FF00 usagepage, new descripter replaces
that with two individual 8 bit desktop.y and desktop.rz usages) I provided a
complete replacement descriptor instead trying to patch the original one.
Patching the descriptor seems not feasible as the new one is much larger.

Note: To actually test this you have to use the tool "ltwheelconf" to put the
DFP into it's native mode - See below for more info.

Background:
Most Logitech wheels are initially reporting themselves with a "fallback"
deviceID (USB_DEVICE_ID_LOGITECH_WHEEL - 0xc294), in order to make sure they
are working even without having the proper driver installed.

If the Logitech driver is installed it sends a special command to the wheel
which sets the wheel to "native mode", enabling enhance features like:
- Clutch pedal
- extended wheel rotation range (up to 900 degrees)
- H-gate shifter
- separate axis for throttle / brake
- all buttons

When the wheel is set to native mode it basically disconnects and reconnects
with a different deviceID (USB_DEVICE_ID_LOGITECH_DFP_WHEEL - 0xc298 in this
case).

I am working on a userspace tool [1] which does the switching from fallback to
native mode. During development I found out that the Driving Force Pro wheel
is not supported in native mode - quierk NOGET is missing and the throttle and
brake axes are reported in a combined way only.

Signed-off-by: Michael Bauer <michael@m-bauer.org>
Signed-off-by: Simon Wood <simon@mungewell.org>

[1] https://github.com/TripleSpeeder/LTWheelConf
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-07 15:48:05 +02:00
Austin Zhang
942fd4225f HID: hid-multitouch: add support for Chunghwa multi-touch panel
Added Chunghwa hid multitouch panel support into hid-multitouch.

Signed-off-by: Austin Zhang <zhang.austin@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-07 15:43:19 +02:00
Tomoki Sekiyama
6dc1418e13 HID: yurex: recognize GeneralKeys wireless presenter as generic HID
Unfortunately, the device seems to have the same Vendor ID and Product ID
as YUREX leg-shakes sensors, and the commit 6bc235a2e2 ("USB: add driver
for Meywa-Denki & Kayac YUREX") added the ID to hid_ignore_list.

I believe that we can distinguish YUREX and the Wireless Presenter by
device type.  The patch below makes the driver ignore only YUREX
(bInterfaceProtocol==0), and recognize Wireless Presenter
(bInterfaceProtocol is keyboard or mouse) as generic HID.  (I don't have
the Wireless Presenter, so not yet ested.)

** YUREX lsusb information:
Bus 002 Device 007: ID 0c45:1010 Microdia
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            0 (Defined at Interface level)
   bDeviceSubClass         0
   bDeviceProtocol         0
   bMaxPacketSize0         8
   idVendor           0x0c45 Microdia
   idProduct          0x1010
   bcdDevice            0.03
   iManufacturer           1 JESS
   iProduct                2 YUREX
   iSerial                 3 10000269
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           34
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xa0
       (Bus Powered)
       Remote Wakeup
     MaxPower              100mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         3 Human Interface Device
       bInterfaceSubClass      1 Boot Interface Subclass
       bInterfaceProtocol      0 None
       iInterface              0
         HID Device Descriptor:
           bLength                 9
           bDescriptorType        33
           bcdHID               1.10
           bCountryCode            0 Not supported
           bNumDescriptors         1
           bDescriptorType        34 Report
           wDescriptorLength      31
          Report Descriptors:
            ** UNAVAILABLE **
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0008  1x 8 bytes
         bInterval              10
Device Status:     0x0002
   (Bus Powered)
   Remote Wakeup Enabled

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=26922

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Reported-by: Thomas B?chler <thomas@archlinux.org>
Tested-by: Thomas B?chler <thomas@archlinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-07 15:34:17 +02:00
Dan Carpenter
5c699d7d3f HID: hiddev: fix use after free in hiddev_release
There are a couple use after free bugs here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
[jkosina@suse.cz: removed already fixed hunk]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-26 14:04:40 +02:00
Jimmy Hon
e23be0a27d HID: add quirk for HyperPen 10000U
Add 5543:0064 UC-Logic Technology Corp. Aiptek HyperPen 10000U to quirks with
HID_QUIRK_MULTI_INPUT.

Originally the device is reporting the x,y coordinates on Z and RX. By adding
this quirk, there will be two kernel devices. The first one is muted and the
second device will report coordinates on X and Y.

Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-24 13:51:21 +02:00
Jiri Kosina
7f77897ef2 HID: hiddev: fix potential use-after-free
Commit 6cb4b04079 ("HID: hiddev: fix race between hiddev_disconnect
and hiddev_release") made it possible to access hiddev (for unlocking
the existance mutex) once hiddev has been kfreed.

Change the order so that this can not happen (always unlock the mutex first,
it is needed only to protect access to ->exist and ->open).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-24 11:43:18 +02:00
Linus Torvalds
c44dead70a Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits)
  USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h
  USB: UHCI: Support big endian GRUSBHC HC
  sparc: add {read,write}*_be routines
  USB: UHCI: Add support for big endian descriptors
  USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier
  USB: UHCI: Add support for big endian mmio
  usb-storage: Correct adjust_quirks to include latest flags
  usb/isp1760: Fix possible unlink problems
  usb/isp1760: Move function isp1760_endpoint_disable() within file.
  USB: remove remaining usages of hcd->state from usbcore and fix regression
  usb: musb: ux500: add configuration and build options for ux500 dma
  usb: musb: ux500: add dma glue layer for ux500
  usb: musb: ux500: add dma name for ux500
  usb: musb: ux500: add ux500 specific code for gadget side
  usb: musb: fix compile error
  usb-storage: fix up the unusual_realtek device list
  USB: gadget: f_audio: Fix invalid dereference of initdata
  EHCI: don't rescan interrupt QHs needlessly
  OHCI: fix regression caused by nVidia shutdown workaround
  USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage
  ...
2011-05-23 12:33:02 -07:00
Jiri Kosina
366a2382c6 Merge branches 'doc', 'multitouch', 'upstream' and 'upstream-fixes' into for-linus 2011-05-23 12:49:25 +02:00
Benjamin Tissoires
22408283bc HID: hid-multitouch: cosmetic changes, sort classes and devices
This patch sorts the defs for the MT_CLS. I choose to split
generic classes and device specific ones to be able to add
more generic classes in the future.

It also put eGalax devices at their right place (alphabetically)
in mt_devices.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-23 11:17:16 +02:00
Benjamin Tissoires
bf5af9b5bb HID: hid-multitouch: class MT_CLS_STANTUM is redundant with MT_CLS_CONFIDENCE
Stantum devices used to work with MT_CLS_STANTUM but MT_CLS_CONFIDENCE
is exactly the same. This patch switches them to this generic class,
and remove the unused MT_CLS_STANTUM.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20 13:35:42 +02:00
Benjamin Tissoires
617b64f977 HID: hid-multitouch: add support for Unitec panels
This patch introduce support for Unitec panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20 13:35:42 +02:00
Benjamin Tissoires
5e74e56da0 HID: hid-multitouch: add support for Touch International panels
This patch introduce support for Touch International panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20 13:35:42 +02:00
Benjamin Tissoires
ee0fbd1491 HID: hid-multitouch: add support for GoodTouch panels
This patch introduce support for GoodTouch panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20 13:35:42 +02:00
Benjamin Tissoires
79603dc9a8 HID: hid-multitouch: add support for CVTouch panels
This patch introduce support for CVTouch panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20 13:35:41 +02:00
Benjamin Tissoires
e6aac3427e HID: hid-multitouch: add support for ActionStar panels
This patch introduce support for ActionStar panels.
This device has not been optimized in term of kernel processing
operations (default class), but it will work.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20 13:35:41 +02:00
Jiri Kosina
6cb4b04079 HID: hiddev: fix race between hiddev_disconnect and hiddev_release
When hiddev_disconnect() runs with chardev open, it will proceed with
usbhid_close(). When userspace in parallel runs the hiddev_release(),
it sees !hiddev->exists (as it has been already set so by
hiddev_disconnect()) and kfrees hiddev while hiddev_disconnect() hasn't
finished yet.

Serialize the access to hiddev->exists and hiddev->open by existancelock.

Reported-by: mike-@cinci.rr.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20 10:50:13 +02:00
Jiri Kosina
23746a66d7 HID: magicmouse: ignore 'ivalid report id' while switching modes
The device reponds with 'invalid report id' when feature report switching it
into multitouch mode is sent to it.

This has been silently ignored before 0825411ade ("HID: bt: Wait for ACK
on Sent Reports"), but since this commit, it propagates -EIO from the _raw
callback .

So let the driver ignore -EIO as response to 0xd7,0x01 report, as that's
how the device reacts in normal mode.

Sad, but following reality.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=35022

Tested-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20 10:28:00 +02:00
Armando Visconti
966922f26c HID: fix a crash in hid_report_raw_event() function.
I'm using a Data Modul EasyTouch USB multitouch controller,
which is issuing a hid report with a size equals to 0. The rsize
value gets set to 536870912 and Linux is crashing in the memset
because the value is too big.

Signed-off-by: Armando Visconti <armando.visconti@st.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20 10:25:23 +02:00
Benjamin Tissoires
c04abeeff9 HID: hid-multitouch: add support for Elo TouchSystems 2515 IntelliTouch Plus
This patch adds support for Elo TouchSystems 2515 IntelliTouch Plus
that can be found in Lenovo A700 all-in-one.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-19 11:54:55 +02:00
Jarod Wilson
437f3b199c HID: assorted usage updates from hut 1.12
I've got a Tivo Slide bluetooth remote/dongle, which uses a fair number
of hid usages that aren't currently mapped in hid-input.c. I'd initially
written additions to hid-input.c with just this device in mind,
including some bits that were specific to the device. This go around,
I'm looking at adding/correcting as many generic HID usages from the HID
Usage Tables, version 1.12, as I can -- which also serves to enable all
but four of the buttons on the Tivo Slide remote[*].

Outside of fixing the obviously incorrect mapping of 0xc 0x45 from
KEY_RADIO to KEY_RIGHT, and making use of the new KEY_IMAGES (just added
in 2.6.39-rc4) for AL Image Browser instead of KEY_MEDIA, these are
purely additions, and thus should have no negative impact on any already
functional HID devices. Most of the added mappings seemed to be
perfectly logical to me, but there were a few that were mapped on more
of an "I think this makes the most sense" basis.

[*] I'll handle the last four tivo buttons via an hid-tivo.c follow-up.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-18 17:07:34 +02:00
Jiri Kosina
6b7b8e488b Merge branch 'master' into upstream.
This is sync with Linus' tree to receive KEY_IMAGES definition
that went in through input tree.
2011-05-18 17:06:49 +02:00
Stefan Achatz
b50f315cbb HID: roccat: fix actual/startup profile sysfs attribute in koneplus
startup_profile and actual_profile didn't work as expected. Also
as the actual profile is persistent, the distinction between the
two was ambiguous, so both use the same code now and startup_profile
has been deprecated. Also the event is now propagated through
chardev. The userland tool has been updated to support this change.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-18 16:34:06 +02:00
Benjamin Tissoires
df167c4a0d HID: hid-multitouch: Add support for Lumio panels
This patch enables support for Lumio optical devices.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-18 15:35:51 +02:00
Daniel Mack
dd2ed487fd HID: 'name' and 'phys' in 'struct hid_device' can never be NULL
As they are static members of fix size, there is no need to NULL-check them.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-18 13:23:31 +02:00
Austin Zhang
4e61f0d75a HID: hid-multitouch: add support for Ilitek dual-touch panel
Added ILITEK hid dual touch panel support into hid-multitouch.

Signed-off-by: Austin Zhang <zhang.austin@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-09 17:56:50 +02:00
Bruno Prémont
8c4e708d01 HID: picolcd: Avoid compile warning/error triggered by copy_from_user()
With CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y compilation of PicoLCD
driver fails on copy_from_user(), without it a warning is generated:

  CC [M]  drivers/hid/hid-picolcd.o
In file included from /usr/src/linux-2.6/arch/x86/include/asm/uaccess.h:571,
                 from /usr/src/linux-2.6/arch/x86/include/asm/sections.h:5,
                 from /usr/src/linux-2.6/arch/x86/include/asm/hw_irq.h:26,
                 from /usr/src/linux-2.6/include/linux/irq.h:359,
                 from /usr/src/linux-2.6/arch/x86/include/asm/hardirq.h:5,
                 from /usr/src/linux-2.6/include/linux/hardirq.h:7,
                 from /usr/src/linux-2.6/include/linux/interrupt.h:12,
                 from /usr/src/linux-2.6/include/linux/usb.h:15,
                 from /usr/src/linux-2.6/drivers/hid/hid-picolcd.c:25:
In function 'copy_from_user',
    inlined from 'picolcd_debug_eeprom_write' at drivers/hid/hid-picolcd.c:1592:
arch/x86/include/asm/uaccess_32.h:212: error: call to 'copy_from_user_overflow' declared with attribute error: copy_from_user() buffer size is not provably correct

gcc-4.4.5 is not able to track size calculation when it is stored into
a variable, thus tell copy_from_user() maximum size via
min(*max-size*, *effective-size*) explicitly and inline how much to copy
at most.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-05 13:45:52 +02:00
Michael Hund
ce97cac813 USB: ldusb: add several new devices
Added several new devices to ldusb and excluded them from the HID driver.

Signed-off-by: Michael Hund <mhund@ld-didactic.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:12:00 -07:00
Peter Gundermann
fdc6807fcd HID: add support for Logitech G27 wheel
Gere's a small patch to add support for the Logitech G27 wheel, since
the prior patch only added FF support for the Driving Force Pro and G25.
The patch contains the changes from the G25 and DFP, too.

I tested the changes with wine/LFS and got full support for all axes and
buttons.

Signed-off: Peter Gundermann <slim-one@users.sourceforge.net>

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-03 10:15:03 +02:00
Peter Waechtler
06268b2a38 HID: hiddev: fix error path in hiddev_read when interrupted
hiddev_read: in case mutex_lock_interruptible will be interrupted
remove the task from the wait queue.

Signed-off-by: Peter Waechtler <pwaechtler@mac.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-29 13:53:53 +02:00
Jiri Kosina
35dca5b4a6 HID: add support for Sony Navigation Controller
Sony Navigation Controller needs a special report to be sent to it
before it is able to operate, the same way as other Sony controllers
do.

Tested-by: Jacek Lukas Wotka <jlw@team-fatal.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-28 15:43:13 +02:00
Jiri Kosina
4b5730fafb HID: add support for barcode scanners from Symbol Technologies
Barcode handheld scanners produced by Symbol Technologies (0x05e0/0x0800
and 0x05e0/0x1300) need HID_QUIRK_NOGET, otherwise their firmware exposes
trouble during enumeration/initialization.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-26 10:51:28 +02:00
Benjamin Tissoires
4a6ee685fb HID: hid-multitouch: merge hid-mosart into hid-multitouch
This patch include MosArt devices into hid-multitouch.
MosArt devices now support mt-protocol B.

We also need to introduce a new quirk for mosart devices to support
their contactID.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-22 14:14:52 +02:00
John Sung
6ab3a9a63f HID: hid-multitouch: add support for PenMount dual-touch panel
This patch adds PenMount support to hid-multitouch.  A new class
MT_CLS_CONFIDENCE is defined for PenMount, since it uses HID_DG_CONFIDENCE as
the valid flag.

Signed-off-by: John Sung <penmount.touch@gmail.com>
[benjamin.tissoires@enac.fr: rebased on top of last_index_field changes]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-22 11:56:52 +02:00
Benjamin Tissoires
2955caed8b HID: hid-multitouch: refactor last_field_index
the current implementation requires the devices to report
HID_DG_CONTACTCOUNT to set the last_field_index value.
However, devices reporting in serial mode (DWAV and PenMount)
do not send this field.
Other devices (3M) add other fields in the reports descriptor
that are not multitouch related at the end, thus the need to
add a special case in the default case when handling events.

A first work around has been set up but with PenMount devices,
we have reached the limit.

The idea is to calculate the last_field_index by relying only on
multitouch fields the device send. This allows us to remove
the handling of non-multitouch events in hid-multitouch, and
guarantee that the function mt_emit_event is always called.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-22 11:54:42 +02:00
Linus Torvalds
42933bac11 Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings
2011-04-07 11:14:49 -07:00
Linus Torvalds
2b9accbee5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Add support for CH Pro Throttle
  HID: hid-magicmouse: Increase evdev buffer size
  HID: add FF support for Logitech G25/G27
  HID: roccat: Add support for wireless variant of Pyra
  HID: Fix typo Keyoutch -> Keytouch
  HID: add support for Skycable 0x3f07 wireless presenter
2011-04-07 09:42:13 -07:00
Jiri Kosina
da60325d83 HID: Add support for CH Pro Throttle
CH Pro Throttle needs NOGET the same way as other products from
the same vendor require.

Reported-by: Unavowed <unavowed@vexillium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-06 07:12:32 -07:00
Chase Douglas
cc5e0f08ca HID: hid-magicmouse: Increase evdev buffer size
The evdev buffer isn't big enough when you get many fingers on the
device. Bump up the buffer to a reasonable size, matching what other
multitouch devices use. Without this change, events may be discarded in
the evdev buffer before they are read.

Reported-by: Simon Budig <simon@budig.de>
Cc: Henrik Rydberg <rydberg@euromail.se>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-06 06:17:45 -07:00
Simon Wood
1478d82df8 HID: add FF support for Logitech G25/G27
Small patch to add support for the G25/G27 by adding USB ID's
as suggested by Peter.

Boots but otherwise untested as I don't have hardware, .debs for
kernel (2.6.38) here if want to test/run Ubuntu/Debian:
http://www.mungewell.org/Logitech_Wii_Wheel/

Reported-by: Peter Gundermann <slim-one@users.sourceforge.net>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-01 15:51:10 +02:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Jiri Kosina
d2a1cfebe3 HID: hidraw: fix comments
Adjust the comments a little bit.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-27 20:30:32 +02:00
Dan Carpenter
ac065bf214 HID: hiddev: fix brace indent
There was an extra tab so the close curly brace didn't match up with
the right if statement.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-27 11:14:40 +02:00
Stefan Achatz
3fce224608 HID: roccat: Add support for wireless variant of Pyra
Wireless variant of Roccat Pyra finally has been tested with
existing driver.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-24 12:47:46 +01:00
Benjamin Tissoires
f786bba449 HID: hid-multitouch: migrate 3M PCT touch screens to hid-multitouch
This patch merges the hid-3m-pct driver into hid-multitouch.
To keep devices working the same way they used to with hid-3m-pct,
we need to add two signal/noise ratios for width and height.
We also need to work on width/height to send proper
ABS_MT_ORIENTATION flag.

Importing 3M into hid-multitouch also solved the bug in which
devices handling width and height in their report descriptors
did not show ABS_MT_TOUCH_MAJOR and ABS_MT_TOUCH_MINOR.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Stéphane Chatty <chatty@enac.fr>
Reviewed-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-24 12:44:45 +01:00
Matthew Garrett
bb7ca747f8 backlight: add backlight type
There may be multiple ways of controlling the backlight on a given
machine.  Allow drivers to expose the type of interface they are
providing, making it possible for userspace to make appropriate policy
decisions.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:43:59 -07:00
Stephen Boyd
3d366e2860 HID: Fix typo Keyoutch -> Keytouch
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-22 10:34:23 +01:00
Benjamin Tissoires
1e648a1372 HID: hid-multitouch: refactor initialization of ABS_MT_ORIENTATION
The way the input_set_abs_params was called for the new composite field
ABS_MT_ORIENTATION was not very clear at second reading.  We can remove the
non-necessary call to set_abs and use the simple call to input_set_abs_params.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-21 17:07:29 +01:00
Benjamin Tissoires
a841b62c5d HID: hid-multitouch: migrate Cando dual touch panels to hid-multitouch
This patch merges hid-cando into the unified multitouch driver.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Stéphane Chatty <chatty@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-21 17:05:51 +01:00
Benjamin Tissoires
043b403aed HID: hid-multitouch: migrate support for Stantum panels to the unified driver.
This patch merges hid-stantum to the generic multitouch driver.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Stéphane Chatty <chatty@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-21 17:05:02 +01:00
Benjamin Tissoires
9498f954a4 HID: hid-multitouch: Auto detection of maxcontacts
This patch enables support of autodetection of maxcontacts.
When adding support for a new device, one is now able to let
the device tell how many contacts it supports, or to manually
set the value if the device happens to provide wrong information.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Stéphane Chatty <chatty@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-21 17:04:25 +01:00
Jiri Kosina
d586dca06a HID: add support for Skycable 0x3f07 wireless presenter
This device contains the very same bug in report descriptor as the
Ortek ones do (i.e. LogicalMinimum == 1, which is wrong for the key
array).

As we have more reports for the Ortek devices, we are keeping the driver
name for now. Apparently there is a chip producer which sells chip with
this buggy descriptor to multiple vendors. Thus if such reports start
to come at highger frequency, we'll either have to rename the driver
accordingly, or come up with more generic workaround.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-21 16:12:23 +01:00
Linus Torvalds
a952baa034 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits)
  Input: tsc2005 - remove 'disable' sysfs attribute
  Input: tsc2005 - add open/close
  Input: tsc2005 - handle read errors from SPI layer
  Input: tsc2005 - do not rearm timer in hardirq handler
  Input: tsc2005 - don't use work for 'pen up' handling
  Input: tsc2005 - do not use 0 in place of NULL
  Input: tsc2005 - use true/false for boolean variables
  Input: tsc2005 - hide selftest attribute if we can't reset
  Input: tsc2005 - rework driver initialization code
  Input: tsc2005 - set up bus type in input device
  Input: tsc2005 - set up parent device
  Input: tsc2005 - clear driver data after unbinding
  Input: tsc2005 - add module description
  Input: tsc2005 - remove driver banner message
  Input: tsc2005 - remove incorrect module alias
  Input: tsc2005 - convert to using dev_pm_ops
  Input: tsc2005 - use spi_get/set_drvdata()
  Input: introduce tsc2005 driver
  Input: xen-kbdfront - move to drivers/input/misc
  Input: xen-kbdfront - add grant reference for shared page
  ...
2011-03-19 22:27:06 -07:00
Linus Torvalds
7fd23a2471 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (48 commits)
  HID: add support for Logitech Driving Force Pro wheel
  HID: hid-ortek: remove spurious reference
  HID: add support for Ortek PKB-1700
  HID: roccat-koneplus: vorrect mode of sysfs attr 'sensor'
  HID: hid-ntrig: init settle and mode check
  HID: merge hid-egalax into hid-multitouch
  HID: hid-multitouch: Send events per slot if CONTACTCOUNT is missing
  HID: ntrig remove if and drop an indent
  HID: ACRUX - activate the device immediately after binding
  HID: ntrig: apply NO_INIT_REPORTS quirk
  HID: hid-magicmouse: Correct touch orientation direction
  HID: ntrig don't dereference unclaimed hidinput
  HID: Do not create input devices for feature reports
  HID: bt hidp: send Output reports using SET_REPORT on the Control channel
  HID: hid-sony.c: Fix sending Output reports to the Sixaxis
  HID: add support for Keytouch IEC 60945
  HID: Add HID Report Descriptor to sysfs
  HID: add IRTOUCH infrared USB to hid_have_special_driver
  HID: kernel oops in out_cleanup in function hidinput_connect
  HID: Add teletext/color keys - gyration remote - EU version (GYAR3101CKDE)
  ...
2011-03-18 10:35:30 -07:00
Jiri Kosina
65b06194c9 Merge branches 'dragonrise', 'hidraw-feature', 'multitouch', 'ntrig', 'roccat', 'upstream' and 'upstream-fixes' into for-linus 2011-03-17 14:31:46 +01:00
Jiri Kosina
5623a24a80 HID: add support for Logitech Driving Force Pro wheel
Add force feedback support for Logitech Driving Force Pro wheel.

Device IDs reported by Michal Malý.

Reported-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-17 00:43:23 +01:00
Jiri Kosina
e96838df55 HID: hid-ortek: remove spurious reference
Remove spurious bugzilla reference from the source comment header.

Also fix the comment to be more correct (it's HID report descriptor
rather than USB).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-17 00:39:33 +01:00
Herton Ronaldo Krzesinski
270fdc0748 HID: add support for Ortek PKB-1700
As reported on http://ubuntuforums.org/showthread.php?t=1594007 the
PKB-1700 needs same special handling as WKB-2000. This change is
originally based on patch posted by user asmoore82 on the Ubuntu
forums.

Cc: stable@kernel.org
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-17 00:32:42 +01:00
Stefan Achatz
61c29f5b18 HID: roccat-koneplus: vorrect mode of sysfs attr 'sensor'
Mode of sysfs attribute 'sensor' was wrongly set to writeonly.
Corrected this to readwrite.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-15 15:41:20 +01:00
Rafi Rubin
7b2a64c96a HID: hid-ntrig: init settle and mode check
Adding a wait before the wakeup signal.

As a precautionary measure sanity check the current sensor mode.  If
needed reset it to "dual".

When the device is responding poorly and needs the wakeup call, it was
missing it.  Giving it a chance to settle first improves the chances
that signal gets through.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-14 13:10:13 +01:00
Richard Nauber
4875ac114d HID: merge hid-egalax into hid-multitouch
This patch merges the hid-egalax driver into hid-multitouch.  There
are two types of devices support by the hid-egalax driver: resistive
and capacitive. Here, they are implicitly distinguished by the absence
of a HID_DG_CONTACTCOUNT field in the latter, so no special code path
needs to be introduced.

As a side effect, this patch fixes the broken suspend/resume behavior
in the old driver.

[rydberg@euromail.se: minor fixups]
Signed-off-by: Richard Nauber <Richard.Nauber@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-14 13:05:08 +01:00
Henrik Rydberg
f153fc3990 HID: hid-multitouch: Send events per slot if CONTACTCOUNT is missing
The recent capacitive DWAV firmwares do not use the CONTACTCOUNT
field, and the touch frame boundary can therefore not be determined.
This patch makes the driver report the touch frame at each completed
slot instead.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-14 13:05:07 +01:00
Rafi Rubin
ff4046294b HID: ntrig remove if and drop an indent
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-14 12:58:15 +01:00
Andy Botting
47340bd9fe Input: bcm5974 - add support for MacBookPro8
This patch add multitouch support for the MacBookPro8,1 and
MacBookPro8,2 models.

Cc: stable@kernel.org
Signed-off-by: Andy Botting <andy@andybotting.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12 20:37:30 -08:00
Dmitry Torokhov
0ae4381097 HID: ACRUX - activate the device immediately after binding
This device does not tolerate delayed opening and goes into a coma if
we try to that. Ubuntu even has a crutch for udev that opened the device
upon seeing it for the first time, but it did not work if we happened to
boot with the device attached, since by the time userspace got around
opening the device it was too late. Let's start the device immediately
to deal with this issue.

Reported-by: Sergei Kolzun <x0r@dv-life.ru>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-12 21:47:18 +01:00
Rafi Rubin
6638dedaec HID: ntrig: apply NO_INIT_REPORTS quirk
Probing reports does bad things with some ntrig firmwares, better to
just leave them alone.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-10 11:37:55 +01:00
Henrik Rydberg
2d9ca4e9f3 HID: hid-magicmouse: Correct touch orientation direction
The magic trackpad and mouse both report touch orientation in opposite
direction to the bcm5974 driver and what is written in
Documents/input/multi-touch-protocol.txt. This patch reverts the
direction, so that all in-kernel devices with this feature behave the
same way.

Since no known application has been utilizing this information yet, it
seems appropriate also for stable.

Cc: stable@kernel.org
Cc: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-10 00:05:59 +01:00
Rafi Rubin
f41a52d301 HID: ntrig don't dereference unclaimed hidinput
Check before dereferencing field->hidinput to fix a reported invalid
deference bug.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-08 14:36:31 +01:00
Henrik Rydberg
f635bd11c8 HID: Do not create input devices for feature reports
When the multi input quirk is set, there is a new input device
created for every feature report. Since the idea is to present
features per hid device, not per input device, revert back to
the original report loop and change the feature_mapping() callback
to not take the input device as argument.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Tested-by: Benjamin Tissoires <benjmain.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-01 17:25:39 +01:00
Antonio Ospite
5710fabf31 HID: hid-sony.c: Fix sending Output reports to the Sixaxis
The Sixaxis does not want the report_id as part of the data packet in
Output reports, so we have to discard buf[0] when sending the actual
control message.

Add also some documentation about that and about why
hdev->hid_output_raw_report needs to be overridden.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-21 13:48:50 +01:00
Jiri Kosina
177900e8c9 HID: add support for Keytouch IEC 60945
The keyboard has several bugs in its report descriptor, most
importantly the Logical Min/Max are completely off.

Replace it with simplified descriptor which describes it properly.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-17 15:12:45 +01:00
Alan Ott
6d3bfb7434 HID: Add HID Report Descriptor to sysfs
Add a new binary sysfs entry called report_descriptor which contains
the HID report descriptor.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-17 13:23:14 +01:00
Benjamin Tissoires
b2e7617e09 HID: add IRTOUCH infrared USB to hid_have_special_driver
Without this patch, the device is handled by hidinput and does
not have the right behavior.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-16 18:38:21 +01:00
Benjamin Tissoires
d9236303d0 HID: kernel oops in out_cleanup in function hidinput_connect
Goto out_cleanup infers a kernel oops: hidinput_disconnect calls
input_unregister_driver to all members of hid->inputs.
However, hidinput already has been added to hid->inputs even
though input_register_device was not called.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-15 23:47:05 +01:00
Steffen Barszus
6497dc3a54 HID: Add teletext/color keys - gyration remote - EU version (GYAR3101CKDE)
This patch adds support for 5 keys which can be found
only on the EU version of the gyration remote, which has been not
mapped before.

Signed-off-by: Steffen Barszus <steffenbpunkt[AT]googlemail[DOT]com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-15 10:29:57 +01:00
Chris Schlund
8ef3953108 HID: hid-lcpower: fix key mapping
I already got some feedback for this module, telling me red and blue keys are
exchanged.  I checked it, and they are right. Due to my incorrect userspace
settings I missed this during my testing.

Signed-off-by: Chris Schlund <chrisschlund@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-13 15:04:51 +01:00
Alan Ott
b4dbde9da8 HID: Add Support for Setting and Getting Feature Reports from hidraw
Per the HID Specification, Feature reports must be sent and received on
the Configuration endpoint (EP 0) through the Set_Report/Get_Report
interfaces.  This patch adds two ioctls to hidraw to set and get feature
reports to and from the device.  Modifications were made to hidraw and
usbhid.

New hidraw ioctls:
  HIDIOCSFEATURE - Perform a Set_Report transfer of a Feature report.
  HIDIOCGFEATURE - Perform a Get_Report transfer of a Feature report.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-11 15:05:49 +01:00
Chris Schlund
75b0702246 HID: add support for wireless remote LC Power model RC1000MCE
Signed-off-by: Chris Schlund <chrisschlund@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:41:59 +01:00
Stefan Achatz
5dc0c9835f HID: roccat: Rename header roccat.h -> hid-roccat.h
It was desired that the header roccat.h should be named hid-roccat.h

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:28 +01:00
Stefan Achatz
e6fa47af55 HID: roccat: Fix bug that prevented roccat chardev from removing devices
pointer to device was cleared too early. This is fixed now.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:28 +01:00
Stefan Achatz
74b643dac4 HID: roccat: Fix NULL pointer dereference when unloading module
Class was destroyed before starting the unregistering driver chain.
Disconnecting a device from roccat chardev in this process then
raised a NULL pointer dereference.
Fixed this by destroying class after unregistering driver.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:28 +01:00
Stefan Achatz
8211e46004 HID: roccat: Add ioctl command to retreive report size from chardev
Roccat chardev was reworked to support only a defined report size per
device and this can be retreived by an ioctl now to enable future changes
in report definitions.
Header was moved/renamed from drivers/hid to include/linux for accessibility.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:28 +01:00
Stefan Achatz
432762e28b HID: roccat: Increase waiting time for Kone[+] to prevent occasional freezes
On newer kernels the device freezes occasionally on initialization with just
70msec between reads. Increased this value to safe 100msec.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:27 +01:00
Stefan Achatz
0e70f97f25 HID: roccat: Add support for Kova[+] mouse
This patch adds support for Roccat Kova[+] mouse.
Userland tools can soon be found at http://sourceforge.net/projects/roccat

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:27 +01:00
Stefan Achatz
5772f63613 HID: roccat: Introduce module hid-roccat-common
Module hid-roccat-common contains functions used by roccat device driver
modules to reduce code duplication.
At the moment it contains just two wrapper methods for usb_control_msg
that ensure that the buffer used for transfer is dma capable which wasn't
the case before.
The kconfig option is not visible to the user but will be selected by the
device specific drivers.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:27 +01:00
Stefan Achatz
a28764ef80 HID: roccat: Use new hid_err macros
Using the new hid_err macros instead of dev_err.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:27 +01:00
Stefan Achatz
cb38cd8786 HID: roccat: Remove empty function definitions for roccat chardev
Roccat chardev is a dependency of all device specific drivers, so
the empty definitions are not needed anymore.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-03 16:37:26 +01:00
Stefan Achatz
3a22ebe9cc HID: hidraw: fix hidraw_disconnect()
hidraw_disconnect() first sets an entry in hidraw_table to NULL
and calls device_destroy() afterwards. The thereby called
hidraw_release() tries to read this already cleared value resulting
in never removing any device from the list.
This got fixed by changing the order of events.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-01 11:16:51 +01:00
Nikolai Kondrashov
b4a65f4ef5 HID: update dragonrise Kconfig description
Add list of (supposedly) supported gamepads to dragonrise driver Kconfig
description.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-01 11:01:06 +01:00
Nikolai Kondrashov
e05eefb9be HID: add support for DragonRise PID 0011 gamepad
Add support for DragonRise Inc. gamepad with USB PID 0x0011 by fixing its report
descriptor. This mainly removes spurious axis.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-01 11:01:06 +01:00
Nikolai Kondrashov
152fd6347e HID: rename hid-drff.c to hid-dr.c
Rename drivers/hid/hid-drff.c (a DragonRise Inc. force feedback gamepad driver)
to driver/hid/hid-dr.c.

This prepares it for addition of support for another gamepad, without force
feedback.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-01 11:01:06 +01:00
Dmitry Torokhov
aebd636bd6 Input: switch completely over to the new versions of get/setkeycode
All users of old style get/setkeycode methids have been converted so
it is time to retire them.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-31 21:16:59 -08:00
Alan Ott
cf28a67366 HID: hidraw: Replace Confusing += Operator with =
Setting of the return value of hidraw_read() uses the += operator when
= is more appropriate.  There is no case where ret can be anything
other than zero when the assignment is made, making = equivalent to
+= and much more clear.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-31 15:43:46 +01:00
Benjamin Tissoires
4dfcced8a1 HID: hid-multitouch: introduce IrTouch Infrared USB device
This patch adds support for IrTouch 42 inches.

Tested-by: Victor Zhuk <v.zhuk@acs-ltd.ru>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-31 15:16:13 +01:00
Benjamin Tissoires
ef2fafb3e2 HID: hid-multitouch: add Benjamin Tissoires as module_author
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-31 15:16:08 +01:00
Benjamin Tissoires
1e9cf35b99 HID: hid-multitouch: Rename MT_CLS_DUAL1 and MT_CLS_DUAL2
This patch renames MT_CLS_DUAL1 to MT_CLS_DUAL_INRANGE_CONTACTID
and MT_CLS_DUAL2 to MT_CLS_DUAL_INRANGE_CONTACTNUMBER for better
readability.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-31 15:16:08 +01:00
Benjamin Tissoires
b79b36be56 HID: hid-multitouch: change default mt_class
The safest quirk for a device (the one that works out of the box for
most of them) is MT_QUIRK_NOT_SEEN_MEANS_UP. Indeed, it does not
make any assumption on the device. When adding a new device, we can
easily test it against MT_CLS_DEFAULT, and then optimize it with other
quirks: that's why no device use MT_CLS_DEFAULT right now.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-31 15:16:08 +01:00
David Rientjes
6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Stefan Achatz
fd82be6c0a HID: roccat: Fix an error message when reading more data from bin attributes
Using cat or something to read from binary attributes would try to do an
additional read with offset equal to filesize. This resulted in an invalid
attribute error. This is fixed by giving the right answer instead of EINVAL.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-20 11:28:53 +01:00
Stefan Achatz
e68cc603b0 HID: roccat: Add support for Roccat Arvo keyboard
This patch add support for Roccat Arvo keyboard. Arvo has 5 additional
configurable buttons and the ability to deactivate certain keys.
Userland tools can soon be found at http://sourceforge.net/projects/roccat

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-20 11:27:54 +01:00
Vasiliy Kulikov
dacfecdbf3 HID: hid-roccat-koneplus: potential NULL dereference
kmalloc() may fail, if so return -ENOMEM.
Also koneplus_init_koneplus_device_struct() should check return code
of koneplus_get_startup_profile() and propagate its return code.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-17 13:20:43 +01:00
Linus Torvalds
8f685fbda4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-multitouch: minor fixes based on additional review
  HID: Switch turbox/mosart touchscreen to hid-mosart
  HID: add Add Cando touch screen 10.1-inch product id
  HID: hid-mulitouch: add support for the 'Sensing Win7-TwoFinger'
  HID: hid-multitouch: add support for Cypress TrueTouch panels
  HID: hid-multitouch: support for PixCir-based panels
  HID: set HID_MAX_FIELD at 128
  HID: add feature_mapping callback
2011-01-13 09:58:38 -08:00
Benjamin Tissoires
2d93666e70 HID: hid-multitouch: minor fixes based on additional review
* amended Kconfig (PixCir and Hanvon are the same panel but with
  different name)
* insert field name in mt_class and retrieving it in mt_probe
* add 2 quirks: MT_QUIRK_VALID_IS_INRANGE, MT_QUIRK_VALID_IS_CONFIDENCE,
  in order to find the field "valid"
* inlined slot_is_contactid and slot_is_contact_number
* cosmetics changes (tabs and comments)
* do not send unnecessary properties once the touch is up

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-11 21:26:56 +01:00
Benjamin Tissoires
c64f6f934c HID: Switch turbox/mosart touchscreen to hid-mosart
This device used the MULTI_INPUT quirk whereas it could be used
with hid-mosart instead to support the multitouch part.

Reference: https://bugs.launchpad.net/ubuntu/+bug/620609/

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-11 21:26:55 +01:00
Benjamin Tissoires
bc5ab083a6 HID: add Add Cando touch screen 10.1-inch product id
This device has been reported to be an hid-cando one.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-11 21:26:55 +01:00
Benjamin Tissoires
5572da08a7 HID: hid-mulitouch: add support for the 'Sensing Win7-TwoFinger'
Added support for the 'Sensing Win7-TwoFinger' panel by GeneralTouch found on some tablets.

Because of conflicting VID/PID, this conflicts with previous support for some
single-touch panels by GeneralTouch

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-11 21:26:55 +01:00
Benjamin Tissoires
a3b5e577d9 HID: hid-multitouch: add support for Cypress TrueTouch panels
Added support for Cypress TrueTouch panels, which detect up to 10 fingers

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-11 21:26:54 +01:00
Benjamin Tissoires
5519cab477 HID: hid-multitouch: support for PixCir-based panels
Created a driver for PixCir based dual-touch panels, including the one
in the Hanvon tablet.  This is done in a code structure aimed at unifying
support for several existing HID multitouch panels.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-11 21:26:54 +01:00
Benjamin Tissoires
0d2689c0f0 HID: add feature_mapping callback
Currently hid doesn't export the features it knows to the specific modules.
Some information can be really important in such features: MosArt and
Cypress devices are by default not in a multitouch mode.
We have to send the value 2 on the right feature.

This patch exports to the module the features report so they can find the
right feature to set up the correct mode.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-11 21:26:53 +01:00
Linus Torvalds
facc7a96d4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (34 commits)
  HID: roccat: Update sysfs attribute doc
  HID: roccat: don't use #pragma pack
  HID: roccat: Add support for Roccat Kone[+] v2
  HID: roccat: reduce number of functions in kone and pyra drivers
  HID: roccat: declare meaning of pack pragma usage in driver headers
  HID: roccat: use class for char device for sysfs attribute creation
  sysfs: Introducing binary attributes for struct class
  HID: hidraw: add compatibility ioctl() for 32-bit applications.
  HID: hid-picolcd: Fix memory leak in picolcd_debug_out_report()
  HID: picolcd: fix misuse of logical operation in place of bitop
  HID: usbhid: base runtime PM on modern API
  HID: replace offsets values with their corresponding BTN_* defines
  HID: hid-mosart: support suspend/resume
  HID: hid-mosart: ignore buttons report
  HID: hid-picolcd: don't use flush_scheduled_work()
  HID: simplify an index check in hid_lookup_collection
  HID: Hoist assigns from ifs
  HID: Remove superfluous __inline__
  HID: Use vzalloc for vmalloc/memset(,0...)
  HID: Add and use hid_<level>: dev_<level> equivalents
  ...
2011-01-10 08:15:37 -08:00
Jiri Kosina
4d04310189 HID: roccat: don't use #pragma pack
Replace #pragma pack ocurences with __atribute__((__packed__));

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-08 01:18:35 +01:00
Stefan Achatz
47dbdbffe1 HID: roccat: Add support for Roccat Kone[+] v2
This patch adds support for Roccat Kone[+] gaming mouse. Kone[+] is an enhanced version
of the old Kone with more memory for macros, a better sensor and more functionality.
This driver is conceptual similar to the existing Kone and Pyra drivers.
Userland tools can soon be found at http://sourceforge.net/projects/roccat

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-08 01:18:28 +01:00
Stefan Achatz
14a057f80f HID: roccat: reduce number of functions in kone and pyra drivers
The profile number is now passed via bin_attribute->private instead
of function parameter to reduce number of functions.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-08 01:11:33 +01:00
Stefan Achatz
bd3a2b9663 HID: roccat: declare meaning of pack pragma usage in driver headers
Using pack pragma to prevent padding bytes in binary data structures
used for hardware communication. Explanation of these pragmas was requested.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-08 01:11:24 +01:00
Stefan Achatz
5012aada50 HID: roccat: use class for char device for sysfs attribute creation
Adding sysfs attributes to an already created device raises no userland
notification. Now the device drivers associate the devices attributes
with a class and use this for roccat event char device creation.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-08 01:11:00 +01:00
Jiri Kosina
a7153258b7 Merge branches 'upstream' and 'upstream-fixes' into for-linus 2011-01-08 01:08:19 +01:00
Linus Torvalds
31b6ca0af7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (58 commits)
  Input: wacom_w8001 - support pen or touch only devices
  Input: wacom_w8001 - use __set_bit to set keybits
  Input: bu21013_ts - fix misuse of logical operation in place of bitop
  Input: i8042 - add Acer Aspire 5100 to the Dritek list
  Input: wacom - add support for digitizer in Lenovo W700
  Input: psmouse - disable the synaptics extension on OLPC machines
  Input: psmouse - fix up Synaptics comment
  Input: synaptics - ignore bogus mt packet
  Input: synaptics - add multi-finger and semi-mt support
  Input: synaptics - report clickpad property
  input: mt: Document interface updates
  Input: fix double equality sign in uevent
  Input: introduce device properties
  hid: egalax: Add support for Wetab (726b)
  Input: include MT library as source for kerneldoc
  MAINTAINERS: Update input-mt entry
  hid: egalax: Add support for Samsung NB30 netbook
  hid: egalax: Document the new devices in Kconfig
  hid: egalax: Add support for Wetab
  hid: egalax: Convert to MT slots
  ...

Fixed up trivial conflict in drivers/input/keyboard/Kconfig
2011-01-07 14:45:47 -08:00
Alan Ott
ae5e49c79c HID: hidraw: add compatibility ioctl() for 32-bit applications.
Added the ioctl function to the compat_ioctl pointer in the file_operations
struct. Before this, some ioctls would fail for 32-bit apps on 64-bit systems.

Signed-off-by: Alan Ott <alan@signal11.us>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-04 11:21:28 +01:00
Jesper Juhl
0fbf8ed976 HID: hid-picolcd: Fix memory leak in picolcd_debug_out_report()
We have a memory leak in drivers/hid/hid-picolcd.c::picolcd_debug_out_report()
in an error path..  We are not always freeing the memory allocated to
'buff' - this patch makes sure we always kfree() what we allocate with
kmalloc() when it is no longer needed.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-03 00:11:30 +01:00
David Sterba
86280a2088 HID: picolcd: fix misuse of logical operation in place of bitop
CC: Bruno Prémont <bonbons@linux-vserver.org>
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-27 16:38:16 +01:00
Oliver Neukum
68229689b6 HID: usbhid: base runtime PM on modern API
This patch doesn't alter functionality, but removes a dedicated kernel
thread.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Tested-by: Maulik Mankad <x0082077@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-22 19:06:53 +01:00
Melchior FRANZ
73bc7d315f USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)
So far the USBLED driver only supports Delcom's "USB Visual Signal
Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The
driver generates virtual files "red", "green", and "blue" under the
device's /sys/ directory, where color values can be read from and
written to.

This patch adds support for Dream Cheeky's "DL100B Webmail Notifier"
(http://www.dreamcheeky.com/webmail-notifier -- available from several
shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL).
This device isn't as pretty as Delcom's, but it's *far* cheaper, and
its 3 LEDs can be set in 32 brightness steps each. The grey envelope
contour can easily be removed, leaving a rather neutral white box (with
a few small holes), which is useful for generic signalling purposes.
Of course, the small circuit board can easily be put into a prettier
case.

The DL100B device pretends to be a HID, but the HID descriptor shows
that it's not overly useful as such (see below). The patch therefore
removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary
commands to usbled.c. The protocol info comes from the developer's
manual that Dream Cheeky kindly provided (815DeveloperManual.pdf).

HID descriptor:

  0: 05 01   Usage Page 'Generic Desktop Controls'
  2: 09 10   Usage 'Reserved'
  4: a1 01   Collection 'Application (mouse, keyboard)'
  6: 05 00           Usage Page 'Undefined'
  8: 19 10           Usage Minimum = 16
 10: 29 11           Usage Maximum = 17
 12: 15 00           Logical Minimum = 0
 14: 25 0f           Logical Maximum = 15
 16: 75 08           Report Size = 8
 18: 95 08           Report Count = 8
 20: 91 02           Output data *var abs lin pref-state null-pos non-vol bit-field
 22: 19 10           Usage Minimum = 16
 24: 29 11           Usage Maximum = 17
 26: 15 00           Logical Minimum = 0
 28: 25 0f           Logical Maximum = 15
 30: 75 08           Report Size = 8
 32: 95 08           Report Count = 8
 34: 81 00           Input data array abs lin pref-state null-pos non-vol bit-field
 36: c0      End Collection

Signed-off-by: Melchior FRANZ <mfranz@aon.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-21 20:48:21 -08:00
Andy Ross
4dd295a73e hid: egalax: Add support for Wetab (726b)
This patch adds support for another Wetab device (726b), and grabs it
accordingly in hid-core.

[rydberg@euromail.se: rename and log message changes]
Signed-off-by: Andy Ross <andy@plausible.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-18 09:25:48 +01:00
Richard Nauber
28906ad6d7 hid: egalax: Add support for Samsung NB30 netbook
The Samsung NB30 touch has a DWAV dual-touch device. This patch adds
the NB30 to the list of supported devices, and grabs it accordingly in
hid-core.

[rydberg@euromail.se: rename and log message changes]
Signed-off-by: Richard Nauber <Richard.Nauber@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-16 11:32:21 +01:00
Henrik Rydberg
e12b355b57 hid: egalax: Document the new devices in Kconfig
Add the new supported devices to the kernel menu config help text.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-16 11:32:21 +01:00
Henrik Rydberg
4e93db23bf hid: egalax: Add support for Wetab
The Wetab tablet dual-touch controller works the same way as the one
in the Joojoo tablet. This patch adds the Wetab to the list of
supported devices, and grabs it accordingly in hid-core.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-16 10:44:01 +01:00
Henrik Rydberg
f7bc8046b3 hid: egalax: Convert to MT slots
The firmware in the joojoo reports touches sequentially, one per
report, which confuses the current driver. A further complication is
the absense of any indication of a touch frame. This patch converts
the driver to the MT slots protocol, and outputs one full touch frame
per report. This way, proper handling for both firmwares is ensured.

Tested-by: Philipp Merkel <mail@philmerk.de>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-16 10:43:53 +01:00
Henrik Rydberg
17c760687f hid: egalax: Add event filtering
Use estimated signal-to-noise ratios to reduce noise and limit the
amount of events emitted.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-16 10:43:46 +01:00
Henrik Rydberg
80a469e4f4 hid: egalax: Report zero as minimum pressure
The firmware reports a logical minimum of one, but in order for
userspace applications to correctly map all reported values to
non-zero pressure, the driver needs to report a logical minimum of
zero.  Fixed with this patch.

Tested-by: Philipp Merkel <mail@philmerk.de>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-16 10:43:37 +01:00
Henrik Rydberg
b88cbd3a00 hid: egalax: Correct for device resolution report error
The firmware of both supported devices report a X/Y maximum of 4095,
whereas in reality, it is eight times larger. Fixed with this patch.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-16 10:43:27 +01:00
Henrik Rydberg
4a864183fb hid: egalax: Setup input device manually
The hid core does not yet handle input filtering. Take over the setup
of the input device, so that proper signal-to-noise ratios can be
used.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-16 10:43:18 +01:00
Henrik Rydberg
c5f4dec1ce input: mt: Move tracking and pointer emulation to input-mt
The drivers using the type B protocol all report tracking information
the same way. The contact id is semantically equivalent to
ABS_MT_SLOT, and the handling of ABS_MT_TRACKING_ID only complicates
the driver. The situation can be improved upon by providing a common
pointer emulation code, thereby removing the need for the tracking id
in the driver.  This patch moves all tracking event handling over to
the input core, simplifying both the existing drivers and the ones
currently in preparation.

Acked-by: Ping Cheng <pingc@wacom.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-16 10:41:38 +01:00
Henrik Rydberg
8cde810016 input: mt: Collect slots initialization code
The MT slots devices all follow the same initialization pattern
of creating slots and hinting about buffer size. Let drivers call
an initialization function instead, and make sure it can be called
repeatedly without side effects.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-16 10:41:12 +01:00
Henrik Rydberg
47c78e8913 input: mt: Break out slots handling
In preparation for common code to handle a larger set of MT slots
devices, move the slots handling over to a separate file.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-16 10:39:57 +01:00
Florian Fainelli
1874542d95 HID: replace offsets values with their corresponding BTN_* defines
Instead of using magic values, use their corresponding BTN_* defines
from linux/input.h.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-14 14:49:27 +01:00
Benjamin Tissoires
c25bcd3400 HID: hid-mosart: support suspend/resume
The device has 2 modes. The first one is an emulation of a touchscreen
by sending left and right button, and the second mode is the one used in
dual-touch (sending trackingID, touch and else).

In case of a suspend/resume, the device switch back to the first mode
described above (with left and right buttons).
This adds a hook in .reset_resume for the device to be switched to
the correct mode (I just copied the code in mosart_probe).

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-14 11:40:51 +01:00
Benjamin Tissoires
ad6d426702 HID: hid-mosart: ignore buttons report
This commit allows the device to be recognized as a touchscreen, and not a
touchpad by xf86-input-evdev.

The device has 2 modes. The first one is an emulation of a touchscreen by
sending left and right button, and the second mode is the one used in
dual-touch (sending trackingID, touch and else).

That's why there is a hid report containing left and right buttons
(9000001 and 9000002). The point is that xorg relies on these fields to
determine if it's a touchpad or a touchscreen.
Clearing the report (return -1) makes xorg detecting it out of the box
as a quite pleasant (dual)touchscreen.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-14 11:40:50 +01:00
Tejun Heo
c4ffafa51b HID: hid-picolcd: don't use flush_scheduled_work()
flush_scheduled_work() is deprecated and scheduled to be removed.
Directly flush picolcd_fb_cleanup on exit instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-11 18:38:20 +01:00
Jiri Kosina
2ade0c1d9d Merge branch 'master' into upstream 2010-12-10 15:19:18 +01:00
Joe Perches
504499f22c HID: simplify an index check in hid_lookup_collection
Save the struct hid_collection * in a temporary to shorten
the generated code a bit and perhaps improve readability.

$ size drivers/hid/hid-core.o*
   text	   data	    bss	    dec	    hex	filename
  16460	     78	      8	  16546	   40a2	drivers/hid/hid-core.o.new
  16469	     78	      8	  16555	   40ab	drivers/hid/hid-core.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-10 15:14:43 +01:00
Joe Perches
a3789a1783 HID: Hoist assigns from ifs
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-10 15:13:43 +01:00
Joe Perches
16ee4cc82b HID: Remove superfluous __inline__
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-10 15:12:22 +01:00
Joe Perches
fe2580204d HID: Use vzalloc for vmalloc/memset(,0...)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-10 15:11:31 +01:00
Joe Perches
4291ee305e HID: Add and use hid_<level>: dev_<level> equivalents
Neaten current uses of dev_<level> by adding and using
hid specific hid_<level> macros.

Convert existing uses of dev_<level> uses to hid_<level>.
Convert hid-pidff printk uses to hid_<level>.

Remove err_hid and use hid_err instead.

Add missing newlines to logging messages where necessary.
Coalesce format strings.

Add and use pr_fmt(fmt) KBUILD_MODNAME ": " fmt

Other miscellaneous changes:

Add const struct hid_device * argument to hid-core functions
extract() and implement() so hid_<level> can be used by them.
Fix bad indentation in hid-core hid_input_field function
that calls extract() function above.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-10 15:10:38 +01:00
Chase Douglas
6a66bbd693 HID: magicmouse: Don't report REL_{X,Y} for Magic Trackpad
With the recent switch to having the hid layer handle standard axis
initialization, the Magic Trackpad now reports relative axes. This would
be fine in the normal mode, but the driver puts the device in multitouch
mode where no relative events are generated. Also, userspace software
depends on accurate axis information for device type detection. Thus,
ignoring the relative axes from the Magic Trackpad is best.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-09 14:39:53 +01:00
Dmitry Torokhov
5bea7660bb HID: add hid_hw_open/close/power() handlers
Instead of exposing the guts of hid->ll_driver relationship to HID
sub-drivers provide these helpers to encapsulate the details.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-08 14:35:14 +01:00
Valentine Barshak
33d6eb570b HID: Consolidate device existence checks in hiddev_ioctl
Currently, if the device has been removed before hiddev_ioctl(),
the -EIO is returned. If it's removed while hiddev_ioctl() is in
progress, some commands are still processed fine, others
return -ENODEV. This change takes the "existancelock" before
processing ioctl commands and releases it at the end.
If the device has been removed, always returns -ENODEV.

Signed-off-by: Valentine Barshak <vbarshak@mvista.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-07 15:45:50 +01:00
Valentine Barshak
1a8e8fab79 HID: Fix race between disconnect and hiddev_ioctl
A USB HID device can be disconnected at any time.
If this happens right before or while hiddev_ioctl is in progress,
the hiddev_ioctl tries to access invalid hiddev->hid pointer.
When the hid device is disconnected, the hiddev_disconnect()
ends up with a call to hid_device_release() which frees
hid_device, but doesn't set the hiddev->hid pointer to NULL.
If the deallocated memory region has been re-used by the kernel,
this can cause a crash or memory corruption.

Since disconnect can happen at any time, we can't initialize
struct hid_device *hid = hiddev->hid at the beginning of ioctl
and then use it.

This change checks hiddev->exist flag while holding
the existancelock and uses hid_device only if it exists.

Signed-off-by: Valentine Barshak <vbarshak@mvista.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-07 15:45:49 +01:00
Linus Torvalds
59e57c622c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: length resolution should be reported units/mm
  HID: add support for F430 Force Feedback Wheel
  HID: egalax: Use kzalloc
  HID: Remove KERN_DEBUG from dbg_hid use

Manually fixed trivial conflict in drivers/hid/hid-input.c (due to
removal of KERN_DEBUG from dbg_hid use clashing with new keycode
interface switch)
2010-12-02 17:40:04 -08:00
Dmitry Torokhov
83ed79c561 HID: length resolution should be reported units/mm
Input ABI requires reporting resolution on main axes in units per
millimeter, not units per inch, so we need to convert accordingly.

Tested-by: Nikolai Kondrashov <spbnick@gmail.com>
Acked-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-02 11:49:11 +01:00
Simon Wood
d65c3768af HID: add support for F430 Force Feedback Wheel
This patch adds USB IDs to enable force feedback on the Thrustmaster
F430 wheel.

Antonio did the work, I just converted to git patch to include in Kernel.

Reported-by: Antonio Orefice <aorefice77@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-29 17:41:23 +01:00
Dmitry Torokhov
ce06b9d6d3 HID: hid-core - rename hid_blacklist to hid_have_special_driver
To avoid confusion with hid_blacklist describing various quirks in
usbhid code, let's rename this one.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-28 16:37:14 +01:00
Dennis Kügler
b9e4b1e0cd HID: Add support for Perixx PERIBOARD-707 (Plus)
This patch adds support for the media keys of the Perixx PERIBOARD-707 (Plus)
keyboard / remote control.

Signed-off-by: Dennis Kügler <dennis.kuegler@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-25 15:59:02 +01:00
Jiri Kosina
edd2126aa8 HID: wacom: make sysfs permissions more strict
It's not really dangerous in this driver, but it's against general
practice and worth fixing.

Wacom uses the attribute for changing the reporting speed of the
tablet (and this actually requires poking the device in the
background) (still I wouldn't consider it a security issue though).

udev is a proper place to handle this.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-18 16:30:52 +01:00
Jiri Kosina
c311598b29 HID: prodikeys: make sysfs permissions more strict
It's not really dangerous in this driver, but it's against general
practice and worth fixing.

Proper place for handling this correctly is udev.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-18 16:30:34 +01:00
Tracey Dent
e9229faf92 HID: usbhid: Clean up makefile (-y instead of -objs)
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is
deprecated and should now be switched. According to (documentation/kbuild/makefiles.txt).

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-18 10:43:18 +01:00
Tracey Dent
d47d612459 HID: Clean up makefile (-y instead of -objs)
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is
deprecated and should now be switched. According to (documentation/kbuild/makefiles.txt).

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-18 10:42:44 +01:00
Arnd Bergmann
451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Henrik Rydberg
5a39ce5b49 HID: egalax: Use kzalloc
To avoid unnecessary explicit initialization, allocate zeroed memory.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-04 11:04:44 -04:00
Jiri Kosina
a4bc6926d0 HID: make translation table selection more clear
Reshuffle the code a little bit so that the translation table selection
is more obvious and there is only one place performing the actual
translation using the selected table.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-03 10:42:02 -04:00
Edgar (gimli) Hucek
99b9f758bb HID: add MacBookAir 3,1 and 3,2 support
This patch add support for the MacBookAir3,1 and MacBookAir3,2 to the hid
driver.

Signed-off-by: Edgar (gimli) Hucek <gimli@dark-green.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-03 10:36:18 -04:00
Joe Perches
587d145200 HID: Remove KERN_DEBUG from dbg_hid use
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-03 10:11:56 -04:00
Ignaz Forster
04561c5aa2 HID: Add Force Feedback support for EMS Trio Linker Plus II
The device has connections for GameCube, PlayStation 2 and Dreamcast
controllers, however Force Feedback is only supported for PS2 and GC
controllers.

When using a PS2 controller it may be necessary to press the "Analog" button to
enable support for both motors (this behavior is identical to the Windows
driver, I have found no way to avoid that).

Signed-off-by: Ignaz Forster <ignaz.forster@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:13:37 -04:00
Linus Torvalds
3a99c63190 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits)
  Input: wacom - specify Cinitq supported tools
  Input: ab8500-ponkey - fix IRQ freeing in error path
  Input: adp5588-keys - use more obvious i2c_device_id name string
  Input: ad7877 - switch to using threaded IRQ
  Input: ad7877 - use attribute group to control visibility of attributes
  Input: serio - add support for PS2Mult multiplexer protocol
  Input: wacom - properly enable runtime PM
  Input: ad7877 - filter events where pressure is beyond the maximum
  Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting
  Input: ad7877 - implement specified chip select behavior
  Input: hp680_ts_input - use cancel_delayed_work_sync()
  Input: mousedev - correct lockdep annotation
  Input: ads7846 - switch to using threaded IRQ
  Input: serio - support multiple child devices per single parent
  Input: synaptics - simplify pass-through port handling
  Input: add ROHM BU21013 touch panel controller support
  Input: omap4-keypad - wake-up on events & long presses
  Input: omap4-keypad - fix interrupt line configuration
  Input: omap4-keypad - SYSCONFIG register configuration
  Input: omap4-keypad - use platform device helpers
  ...
2010-10-25 07:59:01 -07:00
Jiri Kosina
d8692ac012 HID: fix mismerge in hid-lg
Fix wrong merge in hid-lg -- report fixup functions now get
pointer to rdesc.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-23 22:59:33 +02:00
Jiri Kosina
f1275410a1 Merge branch 'waltop' into for-linus 2010-10-23 22:54:53 +02:00
Jiri Kosina
8b66a16f25 Merge branch 'uc-logic' into for-linus
Conflicts:
	drivers/hid/hid-ids.h
	drivers/hid/hid-lg.c
	drivers/hid/usbhid/hid-quirks.c
2010-10-23 22:49:32 +02:00
Jiri Kosina
bbd128b5ac Merge branches '3m', 'egalax', 'logitech', 'magicmouse', 'ntrig' and 'roccat' into for-linus 2010-10-23 22:47:38 +02:00
Jiri Kosina
c3d9d74336 Merge branches 'upstream' and 'upstream-fixes' into for-linus 2010-10-23 22:44:36 +02:00
Linus Torvalds
5cc1035062 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits)
  USB: mct_u232: fix broken close
  USB: gadget: amd5536udc.c: fix error path
  USB: imx21-hcd - fix off by one resource size calculation
  usb: gadget: fix Kconfig warning
  usb: r8a66597-udc: Add processing when USB was removed.
  mxc_udc: add workaround for ENGcm09152 for i.MX35
  USB: ftdi_sio: add device ids for ScienceScope
  USB: musb: AM35x: Workaround for fifo read issue
  USB: musb: add musb support for AM35x
  USB: AM35x: Add musb support
  usb: Fix linker errors with CONFIG_PM=n
  USB: ohci-sh - use resource_size instead of defining its own resource_len macro
  USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro
  USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro
  USB: xhci: Fix compile error when CONFIG_PM=n
  USB: accept some invalid ep0-maxpacket values
  USB: xHCI: PCI power management implementation
  USB: xHCI: bus power management implementation
  USB: xHCI: port remote wakeup implementation
  USB: xHCI: port power management implementation
  ...

Manually fix up (non-data) conflict: the SCSI merge gad renamed the
'hw_sector_size' member to 'physical_block_size', and the USB tree
brought a new use of it.
2010-10-22 20:30:48 -07:00
Linus Torvalds
092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Tomoki Sekiyama
6bc235a2e2 USB: add driver for Meywa-Denki & Kayac YUREX
Meywa-Denki/Kayac YUREX is a leg-shakes sensor device.
See http://bbu.kayac.com/en/about/ for further information.
This driver support read/write the leg-shakes counter in the device
via a device file /dev/yurex[0-9]*.

[minor coding style cleanups fixed by gregkh]

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:21:51 -07:00
Jiri Slaby
cb174681a9 HID: hidraw: fix window in hidraw_release
There is a window between hidraw_table check and its dereference.
In that window, the device may be unplugged and removed form the
system and we will then dereference NULL.

Lock that place properly so that either we get NULL and jump out or we
can work with real pointer.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-20 16:54:04 +02:00
Antonio Ospite
569b10a506 HID: hid-sony: override usbhid_output_raw_report for Sixaxis
Override usbhid_output_raw_report in order to force output reports (sent
via hidraw_write, for instance) on the control endpoint.

The Sony Sixaxis (PS3 Controller) accepts output reports only on the
control endpoint, it silently discards them when they arrive over the
interrupt endpoint where usbhid would normally deliver them.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-20 16:50:24 +02:00
Nikolai Kondrashov
4ea6e4ffb4 HID: add absolute axis resolution calculation
Add absolute axis resolution calculation to the core HID layer, according to HID
specification v1.11 6.2.2.7 Global Items. Only exponent 1 length units for
X/Y/Z/RX/RY/RZ axis are supported for now.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-15 16:40:29 +02:00
Arnd Bergmann
6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
François Jaouen
272036edb7 HID: Add Cando touch screen 15.6-inch product id
This add the product id of the touch screen found on ACER Aspire 5738PZ.  Works
with hid-cando driver.

Signed-off-by: Francois Jaouen<francois.jaouen@laposte.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-13 10:47:32 +02:00
Pierre BAILLY
e1f092102f HID: Add MULTI_INPUT quirk for turbox/mosart touchscreen
This device generates ABS_Z and ABS_RX events, while it should be
generating ABS_X and ABS_Y instead. Using the MULTI_INPUT quirk solves
this issue.

Reference: https://bugs.launchpad.net/ubuntu/+bug/620609/

Signed-off-by: Pierre BAILLY <pierre@substantiel.fr>
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-12 11:39:57 +02:00
Antonio Ospite
e42dee9a99 HID: hidraw, fix a NULL pointer dereference in hidraw_write
BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
IP: [<ffffffffa0f0a625>] hidraw_write+0x3b/0x116 [hid]
[...]

This is reproducible by disconnecting the device while userspace writes
to dev node in a loop and doesn't check return values in order to exit
the loop.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-06 11:30:34 +02:00
Antonio Ospite
d20d5ffab9 HID: hidraw, fix a NULL pointer dereference in hidraw_ioctl
BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
IP: [<ffffffffa02c66b4>] hidraw_ioctl+0xfc/0x32c [hid]
[...]

This is reproducible by disconnecting the device while userspace does
ioctl in a loop and doesn't check return values in order to exit the
loop.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-06 11:30:31 +02:00
Hendrik Iben
2c6118e430 HID: force feedback support for Logitech RumblePad gamepad
This patch adds force feedback support for Logitech WingMan RumblePad
gamepads by extending the Logitech Rumblepad 2 force feedback code.

Signed-off-by: Hendrik Iben <Hendrik_Iben@web.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-04 15:39:53 +02:00
Pascal Auriel - Stantum
b6dc79929f HID: support STmicroelectronics and Sitronix with hid-stantuml driver
New VendorsIds/ProductIds using hid-stantum driver.

Signed-off-by: Stantum <software@stantum.com>
Acked-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01 16:01:34 +02:00
Henrik Rydberg
921990b704 HID: magicmouse: Adjust major / minor axes to scale
By visual inspection, the reported touch_major and touch_minor axes
are roughly a factor of four too small. The factor is approximate,
since the protocol is not known and the HID report encodes touch size
with fewer bits than positions. This patch scales the reported values
by a factor of four.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01 15:42:47 +02:00
Philipp Merkel
f51661105c HID: Fix for problems with eGalax/DWAV multi-touch-screen
This patch fixes three problems with the eGalax/DWAV multi-touch
screen found in the Eee PC T101MT:

1) While there is a dedicated multitouch driver for the screen
   (hid-egalax.c), the MULTI_INPUT quirk is also applied, preventing
   the hid-egalax driver from working. This patch removes the quirk
   so the hid-egalax driver can handle the device correctly.
2) The x and y coordinates sent by the screen in multi-touch mode are
   shifted by three bits from the events sent in single-touch mode, thus
   the coordinates are out of range, leading to the pointer being stuck
   in the bottom-right corner if no additional calibration is applied
   (e.g. in the X evdev driver). This patch shifts the coordinates back.
   This does not decrease accuracy as the last three bits of the "wrong"
   coordinates are always 0.
3) Only multi-touch pressure events are sent, single touch emulation is
   missing pressure information. This patch adds single-touch
   ABS_PRESSURE events.

Signed-off-by: Philipp Merkel <mail@philmerk.de>
Acked-by: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01 15:39:51 +02:00
Nikolai Kondrashov
00e7f9649b HID: waltop: add support for Waltop Slim Tablet 12.1 inch
Add support for Waltop Slim Tablet 12.1 inch by fixing its report descriptor.
This mainly fixes button reporting.

This tablet is also sold as Genius G-Pen F610.
Other possible names of this tablet: VisTablet Original 12", Adesso CyberTablet
Z12, Adesso CT-Z12A, PenPower Tooya Pro, Aiptek Slim 12.1 Inch

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01 15:34:05 +02:00
Rok Mandeljc
8038298fde HID: add NOGET quirk for AXIS 295 Video Surveillance Joystick
This patch adds the NOGET quirk for AXIS 295 Video Surveillance Joystick
(despite AXIS brand the vendor is actually CH Products). Without the quirk, the
joystick is detected but does not generate any events.

Signed-off-by: Rok Mandeljc <rok.mandeljc@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01 15:27:55 +02:00
Alan Stern
50bb6d8492 HID: usbhid: remove unused hiddev_driver
Now that hiddev_driver isn't being used for anything, there's no
reason to keep it around.  This patch (as1419) gets rid of it
entirely.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-24 14:03:44 +02:00
Jiri Kosina
73e6d6c646 Merge branch 'master' into upstream 2010-09-24 14:03:37 +02:00
Michael Poole
64eb105d7f HID: magicmouse: Use hid-input parsing rather than bypassing it
Let the HID core handle input device setup and HID-compliant reports.
This driver then only has to worry about the non-standard reports.

Signed-off-by: Michael Poole <mdpoole@troilus.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-24 13:59:13 +02:00
Alan Ott
12e5272585 HID: trivial formatting fix
Added blank line after declarations.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-22 13:33:20 +02:00
Simon Wood
32c88cbc30 HID: Add support for Logitech Speed Force Wireless gaming wheel
The following patch adds support for the Logitech Speed Force Wireless gaming
wheel. Originally designed for the WII console. Details on the protocol:

http://wiibrew.org/wiki/Logitech_USB_steering_wheel

This patch relies on previous patch:
"Don't Send Feature Reports on Interrupt Endpoint"

Logitech as produce a very similar wheel for the PS2/PS3, it is expected that
this patch could also support the PS2/PS3 wheel if the USB ID's are added and
(if required) the HID descriptor is modified.

Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-22 13:25:39 +02:00
Alan Ott
fe2c91ee24 HID: don't Send Feature Reports on Interrupt Endpoint
Feature reports should only be sent on the control endpoint.

The USB HID standard is unclear and confusing on this issue. It seems to
suggest that Feature reports can be sent on a HID device's Interrupt OUT
endpoint.  This cannot be the case because the report type is not encoded in
transfers sent out the Interrput OUT endpoint.  If Feature reports were sent on
the Interrupt OUT endpint, they would be indistinguishable from Output reports
in the case where Report IDs were not used.

Further, Windows and Mac OS X do not send Feature reports out the interrupt OUT
Endpoint.  They will only go out the Control Endpoint.

In addition, many devices simply do not hande Feature reports sent out the
Interrupt OUT endpoint.

Reported-by: simon@mungewell.org
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-22 13:19:42 +02:00
Henrik Rydberg
48216fbdad HID: 3m: Adjust major / minor axes to scale
By visual inspection, the reported touch_major and touch_minor axes
are a factor of two too large. Presumably the device actually reports
the width_major and width_minor, which are generally about a factor of
two larger than the touches themselves.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-22 11:29:07 +02:00
Henrik Rydberg
1d958c83c8 HID: 3m: Correct touchscreen emulation
The current code sometimes misses to report the last BTN_TOUCH event
when multiple fingers are lifted simultaneously.  With the
introduction of MT slots, the tracking id is available to determine
the oldest active contact. Use this information to simplify and
correct the touchscreen emulation logic.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21 23:22:39 +02:00
Henrik Rydberg
1f01a1fe16 HID: 3m: Convert to MT slots
The Microtouch controller is capable of doing finger tracking on
up to 60 fingers. To reduce bandwidth and cpu usage, convert the
driver to use the MT slots protocol. On Stephane's suggestion, also
insert the additional copyright lines.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21 23:22:34 +02:00
Henrik Rydberg
46c4ba012c HID: 3m: Output proper orientation range
The range of orientation values for height/width devices should
be [0, 1], but is currently set to [1, 1]. Having min == max also
breaks uinput device setup. Fixed with this patch.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21 16:16:09 +02:00
Henrik Rydberg
41035901df HID: 3m: Adjust to sequential MT HID protocol
The multitouch extensions to the HID protocol allows for contact
data to be sent over several reports, which is also the case for
the 3M M2256PW touchscreen. This patch modifies the logic to only
synchronize the input layer when all contacts have been received.
Consequentially, the full 60-finger capacity of the device is enabled.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21 16:11:44 +02:00
Henrik Rydberg
24750f3e46 HID: Add a hid quirk for input sync override
As of lately, HID devices which send per-frame data split over several
HID reports have started to emerge. This patch adds a quirk which
allows the HID driver to take over the input layer synchronization,
and hence the control of the frame boundary.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21 16:11:44 +02:00
Lech Perczak
b7e1b2039d HID: fix A4Tech RP-649 horizontal scrollwheel
Enable fix for their horizontal scroll wheel behaviour, associate
it with B8 hack.

Signed-off-by: Lech Perczak <lech.perczak@multivision.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-17 20:42:42 +02:00
Dmitry Torokhov
f5854fad39 Input: hid-input - allow mapping unknown usages
Currently HID layer only allows to remap keycodes for known usages,
and responds with -EINVAL when user tries to map new usage code.
This precludes us form relying on udev/keymap for establishing correct
mappings and forces us to write dummy HID drivers responsible only for
setting up keymaps.

Let's allow remapping not only usages that have been set up as keys
(usage->type == EV_KEY) but also yet-unmapped usages (usage->type == 0).

Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-15 23:11:29 -07:00
Guillaume Chazarain
8fe294caf8 HID: fix hiddev's use of usb_find_interface
My macbook infrared remote control was broken by commit
bd25f4dd69 ("HID: hiddev: use
usb_find_interface, get rid of BKL").

This device appears in dmesg as:
apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device
[Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0

It stopped working as lircd was getting ENODEV when opening /dev/usb/hiddev0.

AFAICS hiddev_driver is a dummy driver so usb_find_interface(&hiddev_driver)
does not find anything.

The device is associated with the usbhid driver, so let's do
usb_find_interface(&hid_driver) instead.

$ ls -l /sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/usb/hiddev0/device/driver
lrwxrwxrwx 1 root root 0 2010-09-12 16:28 /sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/usb/hiddev0/device/driver -> ../../../../../../bus/usb/drivers/usbhid

Signed-off-by: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-14 10:58:42 +02:00
Dmitry Torokhov
a0bf0ea809 Input: hid-input - switch to using new keycode interface
Switch HID code to use new style of getkeycode and setkeycode
methods to allow retrieving and setting keycodes not only by
their scancodes but also by index.

Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-09 22:02:11 -07:00
Jiri Kosina
eaca138620 HID: fixup blacklist entry for Asus T91MT
The device is handled by hid-mosart driver, and therefore should
be present in hid_blacklist[], not hid_ignore_list[].

Cc: Stephane Chatty <chatty@lii-enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-08 14:31:47 +02:00
Roland Baum
cec15a0ece HID: add device ID for new Asus Multitouch Controller
The following patch instructs usbhid/hid-mosart to handle a new multitouch
controller, built-in by some Asus EeePC T101MT models.

Signed-off-by: Roland Baum <rba@tr33.de>
Tested-by: Roland Baum <rba@tr33.de>
Acked-by: Stéphane Chatty <chatty@enac.fr>
CC: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-08 14:30:35 +02:00
Chase Douglas
1debfb3315 HID: debugfs: wake up reading tasks upon event
Some devices poke the hid core in a way that causes hid_debug_event to
be called, while never calling hid_dump_input. Without this wakeup
addition, tasks reading for hid events through debugfs may never see any
events. It may be that a well written driver doesn't cause this, but
then what's the point of debugfs?

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-08 12:04:03 +02:00
Rafi Rubin
0277873c05 HID: ntrig: identify firmware version
This adds firmware version polling to the end of probe and reports the
version both in the raw form and proccessed to match the formatting used
by N-Trig.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-08 11:46:19 +02:00
Chase Douglas
a462230e16 HID: magicmouse: enable Magic Trackpad support
The trackpad speaks a similar, but different, protocol from the magic
mouse. However, only small code tweaks here and there are needed to make
basic multitouch work.

Extra logic is required for single-touch emulation of the touchpad. The
changes made here take the approach that only one finger may emulate the
single pointer when multiple fingers have touched the screen. Once that
finger is raised, all touches must be raised before any further single
touch events can be sent.

Sometimes the magic trackpad sends two distinct touch reports as one big
report. Simply splitting the packet in two and resending them through
magicmouse_raw_event ensures they are handled properly.

I also added myself to the copyright statement.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03 18:20:47 +02:00
Chase Douglas
6de048bf1d HID: magicmouse: simplify touch data bit manipulation
The new format should be easier to read to determine which bits
correspond to which data. It also brings all the manipulation logic to
the top of the function. This makes size and orientation reading more
clear.

Note that the impetus for this change is the forthcoming support for the
Magic Trackpad, which has a different touch data protocol.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03 18:20:23 +02:00
Chase Douglas
0773590c89 HID: magicmouse: simplify multitouch feature request
Only the first feature request is required to put the Magic Mouse into
multitouch mode. This is also the case for the Magic Trackpad, for which
support will be added in a later commit.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03 15:57:43 +02:00
Johan Hovold
d34c4aa43d HID: add no-get quirk for eGalax touch controller
Add no-get quirk for eGalax touch controller to avoid timeout at probe.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03 12:12:55 +02:00
Chase Douglas
c61b7cee67 HID: magicmouse: remove timestamp logic
The timestamps from the device are currently stored in the private data
structure. These aren't used, so remove them. I've left a comment
detailing the protocol for future reference.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-02 16:51:54 +02:00
Chase Douglas
0228db70ce HID: magicmouse: simplify touch down logic
For the MT protocol, we need to properly keep track of each down touch.
This change simplifies the logic, and should make things easier when
support for the Magic Trackpad is added.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-02 16:49:52 +02:00
Antonio Ospite
816651a7d4 HID: sony: Apply sixaxis quirks only to sixaxis
Be more explicit and avoid calling sony_set_operational_usb() when we
have USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE.

While at it, rename the sony_set_operational routines to
sixaxis_set_operational as they are sixaxis specific.

This is also in preparation for the sysfs interface to set and get bdaddr
over usb and for some other Sixaxis report fixup.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-02 09:40:40 +02:00
Nikolai Kondrashov
67168fd7d4 HID: rdesc parser: remove local item size limit
The HID report descriptor parser requires local items, except "delimiters",
to have data. I.e. to have non-zero size. This removes the restriction.

The HID specification doesn't seem to have such restriction and, for
example, a "usage" item could have zero size if the usage ID is zero.
At least one usage page - Keyboard/Keypad lists zero ID as valid.

This doesn't seem to happen in the wild, probably because the official tool
for authoring report descriptors always puts data even for zero values for
some items, including "usage" items.

However, this makes little sense and at least one open source tool for
descriptor authoring generates zero data size "usage" items, which saves
some space, especially if many such items are used in a descriptor.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-02 09:36:11 +02:00
Xing Wei
bba5394ad3 Input: add support for Hanwang tablets
Add support for Art Master III tablet of BeiJing HanwangTechnology Co, Ltd.

Signed-off-by: Xing Wei <weixing@hanwang.com.cn>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-01 23:26:18 -07:00
Stefan Achatz
d2b570a5d4 HID: roccat: Normalized reported profile number for pyra button events.
Pyra uses profile numbers in range 0-4 for everything except button
events. Using range 1-5 consistent now.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-01 12:42:23 +02:00
Stefan Achatz
cb7cf3da0d HID: roccat: add driver for Roccat Pyra mouse
This patch add support for Pyra mobile gaming mouse from Roccat.
It provides access to profiles, settings, actual settings etc.
through sysfs attributes.
This driver is conceptual similar to the existing Kone driver.
Userland tools can soon be found at http://sourceforge.net/projects/roccat

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-01 12:41:17 +02:00
Nikolai Kondrashov
cdd49a85e2 HID: waltop: comment on tablet modes
Add a comment on modes supported by Waltop tablets - a knowledge extracted
from the outdated official driver, but not yet used by this driver.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-01 12:36:36 +02:00
Nikolai Kondrashov
30311549c3 HID: waltop: fix Media Tablet 10.6 inch zooming
Fix zoom controls of older version of Waltop Media Tablet 10.6 inch, aka
Genius G-Pen M609. This should make it supported on par with the newer
version, aka Genius G-Pen M609X.

The fix is extrapolated from the behavior of the newer version (Genius G-Pen
M609X) and both older and newer versions of Media Tablet 14.1 inch (Genius
G-Pen M712/M712X) and should work with high probability.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-01 12:36:35 +02:00
Nikolai Kondrashov
8f1acc32bb HID: waltop: add Media Tablet 14.1 inch support
Add support for Waltop Media Tablet 14.1 inch by fixing report descriptor.

This tablet is also sold as Genius G-Pen M712 (older version) and M712X
(newer version). Both are supported.

Trust Wide Screen Design Tablet (TB-7300, item no 15358) seems to be the
older version of this tablet (similar to Genius G-Pen M712), and could be
supported as well.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-01 12:36:35 +02:00
Nikolai Kondrashov
4b5b4575ce HID: waltop: fix Media Tablet 10.6 inch scrolling
Add support for horizontal scrolling with Waltop Media Tablet 10.6 inch by
updating the fixed HID report descriptor.

The horizontal/vertical scrolling is toggled by pressing the wheels' center
buttons while in scroll mode, which wasn't discovered at the time the
support for this tablet was added.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-01 12:36:35 +02:00
Thierry Reding
ebd11fecd3 HID: Add quirk for eGalax touch controler.
This patch adds a quirk for the eGalax touch controller which reports
two pairs of axes.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-30 15:50:04 +02:00
Jiri Kosina
c3dc66de59 HID: add support for another BTC Emprex remote control
Add device ID for another variant of this remote control.

Reported-by: Gregor Fuis <gujs.lists@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-30 15:43:25 +02:00
Rafi Rubin
a52dc34c0e HID: ntrig: a bit of whitespace cleanup
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-30 15:26:12 +02:00
Borislav Petkov
a104304431 HID: Kconfig: Complete Kconfig prompt names
Make special HID devices' Kconfig names unambiguous, obviating the need
to enter the help menu of each driver in order to know what hardware
device it actually supports.

Cc: Jiri Kosina <jkosina@suse.cz>
Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Cc: Stephane Chatty <chatty@enac.fr>
Cc: Don Prince <dhprince-devel@yahoo.co.uk>
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-25 13:21:58 +02:00
Alan Ott
c29771c2d8 HID: Set Report ID properly for Output reports on the Control endpoint.
When I made commit 29129a98e6 ("HID: Send Report ID when numbered
reports are sent over the control endpoint"), I didn't account for *buf
not being the report ID anymore, as buf is incremented.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-24 17:49:04 +02:00
Decio Fonini
426409b1ed HID: Kanvus Note A5 tablet needs HID_QUIRK_MULTI_INPUT
The Kanvus Note A5 tablet (with USB ID 5543:6001, USB vendor UC_Logic) needs
the HID_QUIRK_MULTI_INPUT in order to work out of the box; otherwise, we get
the usual "cursor stuck at the upper left corner of the screen".

Signed-off-by: Decio Fonini <fonini@techk.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-24 17:48:57 +02:00
Nikolai Kondrashov
41fa92302b HID: uclogic: add proper support for PF1209
This removes extra event device and fixes reported button codes of UC-Logic
Tablet PF1209.

This tablet is also sold as Genius PenSketch 12x9 (or 9x12) and possibly
under other names.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-23 15:08:42 +02:00
Nikolai Kondrashov
bd9033ebc1 HID: uclogic: fix coding style
Fix minor coding style violations in the hid-uclogic driver.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-23 15:08:42 +02:00
Nikolai Kondrashov
72a4634486 HID: add support for two Waltop tablets
Add support for Waltop Slim Tablet 5.8 inch and Media Tablet 10.6 inch.

These (and other Waltop) tablets are usually sold by different companies
(such as Genius and Trust) and with different names, but with the same USB
vendor/product IDs.

Slim Tablet 5.8 inch is known to also be sold as Genius G-Pen F350 and Trust
Widescreen Mini Tablet (item no 16485).

Media Tablet 10.6 inch is known to also be sold as Genius G-Pen M609 and
M609X. Of these only the latter is known to be supported.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-23 15:01:55 +02:00
David Gow
7cacfa87d3 HID: Add support for chicony multitouch screens.
Adds a hid quirk for the chicony multitouch screen found in the Acer
Aspire 1820pt notebook.

Signed-off-by: David Gow <david@ingeniumdigital.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-19 10:59:14 +02:00
Linus Torvalds
d1126ad907 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  USB HID: Add ID for eGalax Multitouch used in JooJoo tablet
  HID: hiddev: fix memory corruption due to invalid intfdata
  HID: hiddev: protect against disconnect/NULL-dereference race
  HID: picolcd: correct ordering of framebuffer freeing
  HID: picolcd: testing the wrong variable
2010-08-18 15:29:38 -07:00
Chris Ball
83e4491818 USB HID: Add ID for eGalax Multitouch used in JooJoo tablet
The JooJoo tablet (http://thejoojoo.com/) contains an "eGalax Inc. USB
TouchController", and this patch hooks it up to the egalax-touch driver.
Without the patch we don't get any cursor motion, since it comes through
Z/RX rather than X/Y.

(The egalax-touch driver does not yet generate a correct event sequence
for the "serial" protocol used by this device, though -- see the note
added to the code, which comes from research by Stéphane Chatty.)

Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-16 16:01:28 +02:00
Jiri Kosina
9c9e54a8df HID: hiddev: fix memory corruption due to invalid intfdata
Commit bd25f4dd69 ("HID: hiddev: use usb_find_interface,
get rid of BKL") introduced using of private intfdata in hiddev for
purpose of storing hiddev pointer.

This is a problem, because intf pointer is already being set to struct
hid_device pointer by HID core. This obviously lead to memory corruptions
at device disconnect time, such as

WARNING: at lib/kobject.c:595 kobject_put+0x37/0x4b()
kobject: '(null)' (ffff88011e9cd898): is not initialized, yet kobject_put() is being called.

Convert hiddev into accessing hiddev through struct hid_device which is
in intfdata already.

Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-and-tested-by: Heinz Diehl <htd@fritha.org>
Reported-and-tested-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-13 12:19:45 +02:00
Chris Ball
7032269e87 HID: hiddev: protect against disconnect/NULL-dereference race
One of our users reports consistently hitting a NULL dereference that
resolves to the "hid_to_usb_dev(hid);" call in hiddev_ioctl(), when
disconnecting a Lego WeDo USB HID device from an OLPC XO running
Scratch software.  There's a FIXME comment and a guard against the
dereference, but that happens farther down the function than the
initial dereference does.

This patch moves the call to be below the guard, and the user reports
that it fixes the problem for him.  OLPC bug report:
http://dev.laptop.org/ticket/10174

Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-13 11:19:24 +02:00
Linus Torvalds
04f2b9765f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xpad - add USB-ID for PL-3601 Xbox 360 pad
  Input: cy8ctmg100_ts - signedness bug
  Input: elantech - report position also with 3 fingers
  Input: elantech - discard the first 2 positions on some firmwares
  Input: adxl34x - do not mark device as disabled on startup
  Input: gpio_keys - add hooks to enable/disable device
  Input: evdev - rearrange ioctl handling
  Input: dynamically allocate ABS information
  Input: switch to input_abs_*() access functions
  Input: add static inline accessors for ABS properties
2010-08-10 15:08:02 -07:00
Jiri Kosina
f36ee074d5 HID: uclogic: fix up Kconfig entry
Remove remains of the original dependency of the driver on CONFIG_EMBEDDED.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-09 19:56:01 +02:00
Nikolai Kondrashov
f8a489cc5f HID: Add support for UC-Logic WP????U tablets
Add support for UC-Logic WP4030U, WP5540U and WP8060U tablets.
These tablets are usually sold by Genius, Trust and possibly others under
different names and in different cases, but with the original USB
vendor/product IDs.

Currently, these tablets are supported by standalone X.org driver WizardPen.
This patch aims to fix them in the kernel and make them supported by the
generic evdev X.org driver. Still, some minor fixes in the X.org driver are
to be made for the full stack support.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-09 19:52:43 +02:00
Nikolai Kondrashov
50b6369767 HID: Add Tablet Pick -> BTN_STYLUS2 mapping
Many tablet input drivers use BTN_STYLUS2 code to report a second
tablet stylus button. Yet, the generic HID input driver doesn't map it.
Apparently, because there is no corresponding usage in the HID Usage Tables.

This patch selects a compromise usage - "Tablet Pick" (0x46) to be mapped to
BTN_STYLUS2. Some tablets use "Eraser" usage, but mapping it to a button
wouldn't be entirely correct, because the specification says it may be "a
pressure quantity".

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-09 19:52:43 +02:00
Nikolai Kondrashov
73e4008ddd HID: allow resizing and replacing report descriptors
Update hid_driver's report_fixup prototype to allow changing report
descriptor size and/or returning completely different report descriptor.
Update existing usage accordingly.

This is to give more freedom in descriptor fixup and to allow having a whole
fixed descriptor in the code for the sake of readability.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-09 19:52:42 +02:00
Bruno Prémont
1778ca298b HID: picolcd: correct ordering of framebuffer freeing
Fix the free() ordering (which was never reached due to wrong check).

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-06 14:53:10 +02:00
Dan Carpenter
a106025015 HID: picolcd: testing the wrong variable
"ref_cnt" is a point to the reference count and it's non-null.  We really
want to test the reference count itself.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-06 14:51:10 +02:00
Linus Torvalds
5cf65713f8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits)
  Revert "HID: add support for the Wacom Intuos 4 wireless"
  HID: fix up Kconfig entry for ACRUX driver
  HID: add ACRUX game controller force feedback support
  HID: Force input registration for "VEC footpedal"
  HID: add HID_QUIRK_HIDINPUT_FORCE
  HID: hid-input.c: indentation fixes
  HID: hiddev: use usb_find_interface, get rid of BKL
  HID: ignore digitizer usage Undefined (0x00)
  HID: Add support for Conceptronic CLLRCMCE
  HID: hid-ids.h: Whitespace fixup, align using TABs
  HID: picolcd: implement refcounting of framebuffer
  HID: picolcd: do not reallocate memory on depth change
  HID: picolcd: Add minimal palette required by fbcon on 8bpp
  HID: magicmouse: Correct parsing of large X and Y motions.
  HID: magicmouse: report last touch up
  HID: picolcd: fix deferred_io init/cleanup to fb ordering
  HID: hid-ids.h: keep vendor ids in alphabetical order
  HID: add proper support for Elecom BM084 bluetooth mouse
  HID: magicmouse: enable horizontal scrolling
  HID: magicmouse: add param for scroll speed
  ...
2010-08-04 15:23:49 -07:00