This adds support for partial file caching in Coda. Every read, write
and mmap informs the userspace cache manager about what part of a file
is about to be accessed so that the cache manager can ensure the
relevant parts are available before the operation is allowed to proceed.
When a read or write operation completes, this is also reported to allow
the cache manager to track when partially cached content can be
released.
If the cache manager does not support partial file caching, or when the
entire file has been fetched into the local cache, the cache manager may
return an EOPNOTSUPP error to indicate that intent upcalls are no longer
necessary until the file is closed.
[akpm@linux-foundation.org: little whitespace fixup]
Link: http://lkml.kernel.org/r/20190618181301.6960-1-jaharkes@cs.cmu.edu
Signed-off-by: Pedro Cuadra <pjcuadra@gmail.com>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch moves cfi check in coda_ftoc() instead of repeating it in the
wild.
Module size
text data bss dec hex filename
28297 1040 700 30037 7555 fs/coda/coda.ko.before
28263 980 700 29943 74f7 fs/coda/coda.ko.after
Link: http://lkml.kernel.org/r/a2c27663ec4547018c92d71c63b1dff4650b6546.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
coda_fid_to_inode() is only called by coda_downcall() where sb is already
being tested.
Link: http://lkml.kernel.org/r/d2163b3136348faf83ba47dc2d65a5d0a9a135dd.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Inspired by NFS sysctl process
Link: http://lkml.kernel.org/r/9afcc2cd09490849b309786bbf47fef75de7f91c.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
init_coda_psdev() was only called by __init function.
Link: http://lkml.kernel.org/r/a12a5a135fa6b0ea997e1a0af4be0a235c463a24.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
max_t expression was already defined in coda sources
Link: http://lkml.kernel.org/r/e6cda497ce8691db155cb35f8d13ea44ca6cedeb.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can safely destroy vc_mutex at the end of umount process.
Link: http://lkml.kernel.org/r/f436f68908c467c5663bc6a9251b52cd7b95d2a5.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nothing is left in this header that is used by userspace.
Link: http://lkml.kernel.org/r/bb11378cef94739f2cf89425dd6d302a52c64480.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move include/linux/coda_psdev.h to fs/coda/ as there's nothing else that
uses it.
Link: http://lkml.kernel.org/r/3ceeee0415a929b89fb02700b6b4b3a07938acb8.1558117389.git.jaharkes@cs.cmu.edu
Link: https://patchwork.kernel.org/patch/10590257/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The out of tree module version had been bumped several times already,
but we haven't kept this in-tree one in sync, partly because most
changes go from here to the out-of-tree copy.
Link: http://lkml.kernel.org/r/8b0ab50a2da2f0180ac32c79d91811b4d1d0bd8b.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The CODA_FREE() macro just calls kvfree(). We can call that directly
instead.
Link: http://lkml.kernel.org/r/4950a94fd30ec5f84835dd4ca0bb67c0448672f5.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These days we have kvzalloc() so we can delete CODA_ALLOC().
I made a couple related changes in coda_psdev_write(). First, I added
some error handling to avoid a NULL dereference if the allocation
failed. Second, I used kvmalloc() instead of kvzalloc() because we copy
over the memory on the next line so there is no need to zero it first.
Link: http://lkml.kernel.org/r/e56010c822e7a7cbaa8a238cf82ad31c67eaa800.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the 32-bit time_t problems to userspace.
Link: http://lkml.kernel.org/r/8d089068823bfb292a4020f773922fbd82ffad39.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We exchange file timestamps with user space using psdev device
read/write operations with a fixed but architecture specific binary
layout.
On 32-bit systems, this uses a 'timespec' structure that is defined by
the C library to contain two 32-bit values for seconds and nanoseconds.
As we get ready for the year 2038 overflow of the 32-bit signed seconds,
the kernel now uses 64-bit timestamps internally, and user space will do
the same change by changing the 'timespec' definition in the future.
Unfortunately, this breaks the layout of the coda_vattr structure, so we
need to redefine that in terms of something that does not change. I'm
introducing a new 'struct vtimespec' structure here that keeps the
existing layout, and the same change has to be done in the coda user
space copy of linux/coda.h before anyone can use that on a 32-bit
architecture with 64-bit time_t.
An open question is what should happen to actual times past y2038, as
they are now truncated to the last valid date when sent to user space,
and interpreted as pre-1970 times when a timestamp with the MSB set is
read back into the kernel. Alternatively, we could change the new
timespec64_to_coda()/coda_to_timespec64() functions to use a different
interpretation and extend the available range further to the future by
disallowing past timestamps. This would require more changes in the
user space side though.
Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu
Link: https://patchwork.kernel.org/patch/10474735/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Acked-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trivial fix to clean up indentation, replace spaces with tab
Link: http://lkml.kernel.org/r/ffc2bfa5a37ffcdf891c51b2e2ed618103965b24.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Probably safer to just show the unexpected length and debug it from the
userspace side.
Link: http://lkml.kernel.org/r/582ae759a4fdfa31a64c35de489fa4efabac09d6.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add checks to make sure the downcall message we got from the Coda cache
manager is large enough to contain the data it is supposed to have.
i.e. when we get a CODA_ZAPDIR we can access &out->coda_zapdir.CodaFid.
Link: http://lkml.kernel.org/r/894fb6b250add09e4e3935f14649f21284a5cb18.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When fget fails, the lack of error-handling code may cause unexpected
results.
This patch adds error-handling code after calling fget.
Link: http://lkml.kernel.org/r/2514ec03df9c33b86e56748513267a80dd8004d9.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Coda updates".
The following patch series is a collection of various fixes for Coda,
most of which were collected from linux-fsdevel or linux-kernel but
which have as yet not found their way upstream.
This patch (of 22):
Various file systems expect that vma->vm_file points at their own file
handle, several use file_inode(vma->vm_file) to get at their inode or
use vma->vm_file->private_data. However the way Coda wrapped mmap on a
host file broke this assumption, vm_file was still pointing at the Coda
file and the host file systems would scribble over Coda's inode and
private file data.
This patch fixes the incorrect expectation and wraps vm_ops->open and
vm_ops->close to allow Coda to track when the vm_area_struct is
destroyed so we still release the reference on the Coda file handle at
the right time.
Link: http://lkml.kernel.org/r/0e850c6e59c0b147dc2dcd51a3af004c948c3697.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
linux/poll.h is included more than once.
Link: http://lkml.kernel.org/r/5c86820f.1c69fb81.149f0.0834@mx.google.com
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only place that has any business including asm/poll.h
is linux/poll.h. Fortunately, asm/poll.h had only been
included in 3 places beyond that one, and all of them
are trivial to switch to using linux/poll.h.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull misc vfs updates from Al Viro:
"Assorted stuff, really no common topic here"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: grab the lock instead of blocking in __fd_install during resizing
vfs: stop clearing close on exec when closing a fd
include/linux/fs.h: fix comment about struct address_space
fs: make fiemap work from compat_ioctl
coda: fix 'kernel memory exposure attempt' in fsync
pstore: remove unneeded unlikely()
vfs: remove unneeded unlikely()
stubs for mount_bdev() and kill_block_super() in !CONFIG_BLOCK case
make vfs_ustat() static
do_handle_open() should be static
elf_fdpic: fix unused variable warning
fold destroy_super() into __put_super()
new helper: destroy_unused_super()
fix address space warnings in ipc/
acct.h: get rid of detritus
When an application called fsync on a file in Coda a small request with
just the file identifier was allocated, but the declared length was set
to the size of union of all possible upcall requests.
This bug has been around for a very long time and is now caught by the
extra checking in usercopy that was introduced in Linux-4.8.
The exposure happens when the Coda cache manager process reads the fsync
upcall request at which point it is killed. As a result there is nobody
servicing any further upcalls, trapping any processes that try to access
the mounted Coda filesystem.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use proper ssize_t and size_t types for the return value and count
argument, move the offset last and make it an in/out argument like
all other read/write helpers, and make the buf argument a void pointer
to get rid of lots of casts in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
De-dupliate some code and allow for passing the flags argument to
vfs_iter_write. Additionally it now properly updates timestamps.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
De-dupliate some code and allow for passing the flags argument to
vfs_iter_read. Additional it properly updates atime now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Allocate struct backing_dev_info separately instead of embedding it
inside the superblock. This unifies handling of bdi among users.
CC: Jan Harkes <jaharkes@cs.cmu.edu>
CC: coda@cs.cmu.edu
CC: codalist@coda.cs.cmu.edu
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull vfs 'statx()' update from Al Viro.
This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.
It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?
From David Howells.
Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:
https://www.spinics.net/lists/linux-fsdevel/msg33831.html
* 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
statx: Add a system call to make enhanced file info available
Pull sched.h split-up from Ingo Molnar:
"The point of these changes is to significantly reduce the
<linux/sched.h> header footprint, to speed up the kernel build and to
have a cleaner header structure.
After these changes the new <linux/sched.h>'s typical preprocessed
size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K
lines), which is around 40% faster to build on typical configs.
Not much changed from the last version (-v2) posted three weeks ago: I
eliminated quirks, backmerged fixes plus I rebased it to an upstream
SHA1 from yesterday that includes most changes queued up in -next plus
all sched.h changes that were pending from Andrew.
I've re-tested the series both on x86 and on cross-arch defconfigs,
and did a bisectability test at a number of random points.
I tried to test as many build configurations as possible, but some
build breakage is probably still left - but it should be mostly
limited to architectures that have no cross-compiler binaries
available on kernel.org, and non-default configurations"
* 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits)
sched/headers: Clean up <linux/sched.h>
sched/headers: Remove #ifdefs from <linux/sched.h>
sched/headers: Remove the <linux/topology.h> include from <linux/sched.h>
sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h>
sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h>
sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h>
sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/init.h>
sched/core: Remove unused prefetch_stack()
sched/headers: Remove <linux/rculist.h> from <linux/sched.h>
sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h>
sched/headers: Remove <linux/signal.h> from <linux/sched.h>
sched/headers: Remove <linux/rwsem.h> from <linux/sched.h>
sched/headers: Remove the runqueue_is_locked() prototype
sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h>
sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h>
sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h>
...
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If .readlink == NULL implies generic_readlink().
Generated by:
to_del="\.readlink.*=.*generic_readlink"
for i in `git grep -l $to_del`; do sed -i "/$to_del"/d $i; done
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
CURRENT_TIME_SEC is not y2038 safe. current_time() will
be transitioned to use 64 bit time along with vfs in a
separate patch.
There is no plan to transistion CURRENT_TIME_SEC to use
y2038 safe time interfaces.
current_time() will also be extended to use superblock
range checking parameters when range checking is introduced.
This works because alloc_super() fills in the the s_time_gran
in super block to NSEC_PER_SEC.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is trivial to do:
- add flags argument to foo_rename()
- check if flags is zero
- assign foo_rename() to .rename2 instead of .rename
This doesn't mean it's impossible to support RENAME_NOREPLACE for these
filesystems, but it is not trivial, like for local filesystems.
RENAME_NOREPLACE must guarantee atomicity (i.e. it shouldn't be possible
for a file to be created on one host while it is overwritten by rename on
another host).
Filesystems converted:
9p, afs, ceph, coda, ecryptfs, kernfs, lustre, ncpfs, nfs, ocfs2, orangefs.
After this, we can get rid of the duplicate interfaces for rename.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Howells <dhowells@redhat.com> [AFS]
Acked-by: Mike Marshall <hubcap@omnibond.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Mark Fasheh <mfasheh@suse.com>
it's not needed for file_operations of inodes located on fs defined
in the hosting module and for file_operations that go into procfs.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
