mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 08:31:55 +00:00
4aefe1c2bd
1143 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
965a9d75e3 |
Tracing updates for 5.20 / 6.0
- Runtime verification infrastructure
This is the biggest change for this pull request. It introduces the
runtime verification that is necessary for running Linux on safety
critical systems. It allows for deterministic automata models to be
inserted into the kernel that will attach to tracepoints, where the
information on these tracepoints will move the model from state to state.
If a state is encountered that does not belong to the model, it will then
activate a given reactor, that could just inform the user or even panic
the kernel (for which safety critical systems will detect and can recover
from).
- Two monitor models are also added: Wakeup In Preemptive (WIP - not to be
confused with "work in progress"), and Wakeup While Not Running (WWNR).
- Added __vstring() helper to the TRACE_EVENT() macro to replace several
vsnprintf() usages that were all doing it wrong.
- eprobes now can have their event autogenerated when the event name is left
off.
- The rest is various cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYu0yzRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qj4HAP4tQtV55rjj4DQ5XIXmtI3/64PmyRSJ
+y4DEXi1UvEUCQD/QAuQfWoT/7gh35ltkfeS4t3ockzy14rrkP5drZigiQA=
=kEtM
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Runtime verification infrastructure
This is the biggest change here. It introduces the runtime
verification that is necessary for running Linux on safety critical
systems.
It allows for deterministic automata models to be inserted into the
kernel that will attach to tracepoints, where the information on
these tracepoints will move the model from state to state.
If a state is encountered that does not belong to the model, it will
then activate a given reactor, that could just inform the user or
even panic the kernel (for which safety critical systems will detect
and can recover from).
- Two monitor models are also added: Wakeup In Preemptive (WIP - not to
be confused with "work in progress"), and Wakeup While Not Running
(WWNR).
- Added __vstring() helper to the TRACE_EVENT() macro to replace
several vsnprintf() usages that were all doing it wrong.
- eprobes now can have their event autogenerated when the event name is
left off.
- The rest is various cleanups and fixes.
* tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits)
rv: Unlock on error path in rv_unregister_reactor()
tracing: Use alignof__(struct {type b;}) instead of offsetof()
tracing/eprobe: Show syntax error logs in error_log file
scripts/tracing: Fix typo 'the the' in comment
tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT
tracing: Use free_trace_buffer() in allocate_trace_buffers()
tracing: Use a struct alignof to determine trace event field alignment
rv/reactor: Add the panic reactor
rv/reactor: Add the printk reactor
rv/monitor: Add the wwnr monitor
rv/monitor: Add the wip monitor
rv/monitor: Add the wip monitor skeleton created by dot2k
Documentation/rv: Add deterministic automata instrumentation documentation
Documentation/rv: Add deterministic automata monitor synthesis documentation
tools/rv: Add dot2k
Documentation/rv: Add deterministic automaton documentation
tools/rv: Add dot2c
Documentation/rv: Add a basic documentation
rv/include: Add instrumentation helper functions
rv/include: Add deterministic automata monitor definition via C macros
...
|
||
|
Linus Torvalds
|
7d9d077c78 |
RCU pull request for v5.20 (or whatever)
This pull request contains the following branches: doc.2022.06.21a: Documentation updates. fixes.2022.07.19a: Miscellaneous fixes. nocb.2022.07.19a: Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms. poll.2022.07.21a: Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods. rcu-tasks.2022.06.21a: Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead. torture.2022.06.21a: Torture-test updates. ctxt.2022.07.05a: Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmLgMcgTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jArXD/0fjbCwqpRjHVTzjMY8jN4zDkqZZD6m g8Fx27hZ4ToNFwRptyHwNezrNj14skjAJEXfdjaVw32W62ivXvf0HINvSzsTLCSq k2kWyBdXLc9CwY5p5W4smnpn5VoAScjg5PoPL59INoZ/Zziji323C7Zepl/1DYJt 0T6bPCQjo1ZQoDUCyVpSjDmAqxnderWG0MeJVt74GkLqmnYLANg0GH8c7mH4+9LL kVGlLp5nlPgNJ4FEoFdMwNU8T/ETmaVld/m2dkiawjkXjJzB2XKtBigU91DDmXz5 7DIdV4ABrxiy4kGNqtIe/jFgnKyVD7xiDpyfjd6KTeDr/rDS8u2ZH7+1iHsyz3g0 Np/tS3vcd0KR+gI/d0eXxPbgm5sKlCmKw/nU2eArpW/+4LmVXBUfHTG9Jg+LJmBc JrUh6aEdIZJZHgv/nOQBNig7GJW43IG50rjuJxAuzcxiZNEG5lUSS23ysaA9CPCL PxRWKSxIEfK3kdmvVO5IIbKTQmIBGWlcWMTcYictFSVfBgcCXpPAksGvqA5JiUkc egW+xLFo/7K+E158vSKsVqlWZcEeUbsNJ88QOlpqnRgH++I2Yv/LhK41XfJfpH+Y ALxVaDd+mAq6v+qSHNVq9wT3ozXIPy/zK1hDlMIqx40h2YvaEsH4je+521oSoN9r vX60+QNxvUBLwA== =vUNm -----END PGP SIGNATURE----- Merge tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes - Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms - Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods - Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead - Torture-test updates - Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y * tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits) rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings rcu: Diagnose extended sync_rcu_do_polled_gp() loops rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings rcutorture: Test polled expedited grace-period primitives rcu: Add polled expedited grace-period primitives rcutorture: Verify that polled GP API sees synchronous grace periods rcu: Make Tiny RCU grace periods visible to polled APIs rcu: Make polled grace-period API account for expedited grace periods rcu: Switch polled grace-period APIs to ->gp_seq_polled rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty rcu/nocb: Add option to opt rcuo kthreads out of RT priority rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread() rcu/nocb: Add an option to offload all CPUs on boot rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order rcu/nocb: Add/del rdp to iterate from rcuog itself rcu/tree: Add comment to describe GP-done condition in fqs loop rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs() rcu/kvfree: Remove useless monitor_todo flag rcu: Cleanup RCU urgency state for offline CPU ... |
||
Daniel Bristot de Oliveira
|
792575348f |
rv/include: Add deterministic automata monitor definition via C macros
In Linux terms, the runtime verification monitors are encapsulated
inside the "RV monitor" abstraction. The "RV monitor" includes a set
of instances of the monitor (per-cpu monitor, per-task monitor, and
so on), the helper functions that glue the monitor to the system
reference model, and the trace output as a reaction for event parsing
and exceptions, as depicted below:
Linux +----- RV Monitor ----------------------------------+ Formal
Realm | | Realm
+-------------------+ +----------------+ +-----------------+
| Linux kernel | | Monitor | | Reference |
| Tracing | -> | Instance(s) | <- | Model |
| (instrumentation) | | (verification) | | (specification) |
+-------------------+ +----------------+ +-----------------+
| | |
| V |
| +----------+ |
| | Reaction | |
| +--+--+--+-+ |
| | | | |
| | | +-> trace output ? |
+------------------------|--|----------------------+
| +----> panic ?
+-------> <user-specified>
Add the rv/da_monitor.h, enabling automatic code generation for the
*Monitor Instance(s)* using C macros, and code to support it.
The benefits of the usage of macro for monitor synthesis are 3-fold as it:
- Reduces the code duplication;
- Facilitates the bug fix/improvement;
- Avoids the case of developers changing the core of the monitor code
to manipulate the model in a (let's say) non-standard way.
This initial implementation presents three different types of monitor
instances:
- DECLARE_DA_MON_GLOBAL(name, type)
- DECLARE_DA_MON_PER_CPU(name, type)
- DECLARE_DA_MON_PER_TASK(name, type)
The first declares the functions for a global deterministic automata monitor,
the second for monitors with per-cpu instances, and the third with per-task
instances.
Link: https://lkml.kernel.org/r/51b0bf425a281e226dfeba7401d2115d6091f84e.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
Paul E. McKenney
|
434c9eefb9 |
rcu-tasks: Add data structures for lightweight grace periods
This commit adds fields to task_struct and to rcu_tasks_percpu that will be used to avoid the task-list scan for RCU Tasks Trace grace periods, and also initializes these fields. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: KP Singh <kpsingh@kernel.org> |
||
Andrei Vagin
|
133e2d3e81 |
fs/exec: allow to unshare a time namespace on vfork+exec
Right now, a new process can't be forked in another time namespace if it shares mm with its parent. It is prohibited, because each time namespace has its own vvar page that is mapped into a process address space. When a process calls exec, it gets a new mm and so it could be "legal" to switch time namespace in that case. This was not implemented and now if we want to do this, we need to add another clone flag to not break backward compatibility. We don't have any user requests to switch times on exec except the vfork+exec combination, so there is no reason to add a new clone flag. As for vfork+exec, this should be safe to allow switching timens with the current clone flag. Right now, vfork (CLONE_VFORK | CLONE_VM) fails if a child is forked into another time namespace. With this change, vfork creates a new process in parent's timens, and the following exec does the actual switch to the target time namespace. Suggested-by: Florian Weimer <fweimer@redhat.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220613060723.197407-1-avagin@gmail.com |
||
|
Linus Torvalds
|
1ec6574a3c |
This set of changes updates init and user mode helper tasks to be
ordinary user mode tasks. In commit |
||
|
Linus Torvalds
|
98931dd95f |
Yang Shi has improved the behaviour of khugepaged collapsing of readonly
file-backed transparent hugepages.
Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
enablement of the recent huge page vmemmap optimization feature.
Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
David Vernet has done some fixup work on the memcg selftests.
Peter Xu has taught userfaultfd to handle write protection faults against
shmem- and hugetlbfs-backed files.
More DAMON development from SeongJae Park - adding online tuning of the
feature and support for monitoring of fixed virtual address ranges. Also
easier discovery of which monitoring operations are available.
Nadav Amit has done some optimization of TLB flushing during mprotect().
Neil Brown continues to labor away at improving our swap-over-NFS support.
David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
Peng Liu fixed some errors in the core hugetlb code.
Joao Martins has reduced the amount of memory consumed by device-dax's
compound devmaps.
Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
Roman Gushchin has done more work on the memcg selftests.
And, of course, many smaller fixes and cleanups. Notably, the customary
million cleanup serieses from Miaohe Lin.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
=nFe6
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
|
||
|
Linus Torvalds
|
3e2cbc016b |
- Add Raptor Lake to the set of CPU models which support splitlock
- Make life miserable for apps using split locks by slowing them down considerably while the rest of the system remains responsive. The hope is it will hurt more and people will really fix their misaligned locks apps. As a result, free a TIF bit. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmKL5PQACgkQEsHwGGHe VUrz1Q//QjAKyKsAwCzGSPergtnZp9drimSuNsZAz6/xL8wFnn2nfWJTxugNF5jg n0Hal2oUGC8lg13mliB7NuDNu4RUWpkFzTzcIbPT8K9h7CUBdQPzqS7E3/p4s/eG ZCHp8psBGNp8+/+/LFfu9yhzYsAH9ji5KWmOzTVx9UdP3ovgR8BuCI7FCVJSfRz7 cY690XgvcuKoXKckVNaCcoQXPJxykfk4Y1yt1TpITqivFbs2I0vLgzEhoRcTAhPA nX3pR3uy6oaA6rZAapRt8lbLWOwIEWoI0Tt1v+r5p28+nFiCRfm1XdPYK6CDBlox UuMBK4WyvSKjKHLu3wEdLCvYbs1kw2l9pXvS3hrqsKhbdeXKrxrNZ3zshwFMAYap MY/nSTsKSWUUgMgUbWI084csapGFB+hxwY8OVr6JXbxE8YYD/yCbPGOe1cLI7MMt /H3F6vNqSzdp1N3mAaaKVxiiT21lHIn6oJuSZcDE5sOvBwvpXsOp/w3FxhJCOX49 PXrZLZmSHkDQSbh1XnvT/a+rq3XX1TFXFz71HYZf1yDk+xTijECglNtGnGSdj2Za iOw6M8VduV5Wy3ED9ubonruuHEJn6njpx/MH1B9+mAZsuLBpmuYFBxOn6AHOkXSb MVJD4flHXj0ugYm4Q5Y3yi24iWLsRI9utTOU079VL6i6DmFXeZc= =svvI -----END PGP SIGNATURE----- Merge tag 'x86_splitlock_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 splitlock updates from Borislav Petkov: - Add Raptor Lake to the set of CPU models which support splitlock - Make life miserable for apps using split locks by slowing them down considerably while the rest of the system remains responsive. The hope is it will hurt more and people will really fix their misaligned locks apps. As a result, free a TIF bit. * tag 'x86_splitlock_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/split_lock: Enable the split lock feature on Raptor Lake x86/split-lock: Remove unused TIF_SLD bit x86/split_lock: Make life miserable for split lockers |
||
Yang Shi
|
d2081b2bf8 |
mm: khugepaged: make khugepaged_enter() void function
The most callers of khugepaged_enter() don't care about the return value. Only dup_mmap(), anonymous THP page fault and MADV_HUGEPAGE handle the error by returning -ENOMEM. Actually it is not harmful for them to ignore the error case either. It also sounds overkilling to fail fork() and page fault early due to khugepaged_enter() error, and MADV_HUGEPAGE does set VM_HUGEPAGE flag regardless of the error. Link: https://lkml.kernel.org/r/20220510203222.24246-6-shy828301@gmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: Song Liu <song@kernel.org> Acked-by: Vlastmil Babka <vbabka@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Rik van Riel <riel@surriel.com> Cc: Song Liu <songliubraving@fb.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Eric W. Biederman
|
753550eb0c |
fork: Explicitly set PF_KTHREAD
Instead of implicitly inheriting PF_KTHREAD from the parent process examine arguments in kernel_clone_args to see if PF_KTHREAD should be set. This makes knowledge of which new threads are kernel threads explicit. This also makes it so that init and the user mode helper processes no longer have PF_KTHREAD set. Link: https://lkml.kernel.org/r/20220506141512.516114-6-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
||
|
Eric W. Biederman
|
5bd2e97c86 |
fork: Generalize PF_IO_WORKER handling
Add fn and fn_arg members into struct kernel_clone_args and test for them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER). This allows any task that wants to be a user space task that only runs in kernel mode to use this functionality. The code on x86 is an exception and still retains a PF_KTHREAD test because x86 unlikely everything else handles kthreads slightly differently than user space tasks that start with a function. The functions that created tasks that start with a function have been updated to set ".fn" and ".fn_arg" instead of ".stack" and ".stack_size". These functions are fork_idle(), create_io_thread(), kernel_thread(), and user_mode_thread(). Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
||
|
Eric W. Biederman
|
36cb0e1cda |
fork: Explicity test for idle tasks in copy_thread
The architectures ia64 and parisc have special handling for the idle thread in copy_process. Add a flag named idle to kernel_clone_args and use it to explicity test if an idle process is being created. Fullfill the expectations of the rest of the copy_thread implemetations and pass a function pointer in .stack from fork_idle(). This makes what is happening in copy_thread better defined, and is useful to make idle threads less special. Link: https://lkml.kernel.org/r/20220506141512.516114-3-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
||
|
Eric W. Biederman
|
c5febea095 |
fork: Pass struct kernel_clone_args into copy_thread
With io_uring we have started supporting tasks that are for most purposes user space tasks that exclusively run code in kernel mode. The kernel task that exec's init and tasks that exec user mode helpers are also user mode tasks that just run kernel code until they call kernel execve. Pass kernel_clone_args into copy_thread so these oddball tasks can be supported more cleanly and easily. v2: Fix spelling of kenrel_clone_args on h8300 Link: https://lkml.kernel.org/r/20220506141512.516114-2-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
||
|
Eric W. Biederman
|
343f4c49f2 |
kthread: Don't allocate kthread_struct for init and umh
If kthread_is_per_cpu runs concurrently with free_kthread_struct the kthread_struct that was just freed may be read from. This bug was introduced by commit |
||
Fenghua Yu
|
2667ed10d9 |
mm: Fix PASID use-after-free issue
The PASID is being freed too early. It needs to stay around until after
device drivers that might be using it have had a chance to clear it out
of the hardware.
The relevant refcounts are:
mmget() /mmput() refcount the mm's address space
mmgrab()/mmdrop() refcount the mm itself
The PASID is currently tied to the life of the mm's address space and freed
in __mmput(). This makes logical sense because the PASID can't be used
once the address space is gone.
But, this misses an important point: even after the address space is gone,
the PASID will still be programmed into a device. Device drivers might,
for instance, still need to flush operations that are outstanding and need
to use that PASID. They do this at file->release() time.
Device drivers call the IOMMU driver to hold a reference on the mm itself
and drop it at file->release() time. But, the IOMMU driver holds a
reference on the mm itself, not the address space. The address space (and
the PASID) is long gone by the time the driver tries to clean up. This is
effectively a use-after-free bug on the PASID.
To fix this, move the PASID free operation from __mmput() to __mmdrop().
This ensures that the IOMMU driver's existing mmgrab() keeps the PASID
allocated until it drops its mm reference.
Fixes:
|
||
Tony Luck
|
b041b525da |
x86/split_lock: Make life miserable for split lockers
In https://lore.kernel.org/all/87y22uujkm.ffs@tglx/ Thomas said: Its's simply wishful thinking that stuff gets fixed because of a WARN_ONCE(). This has never worked. The only thing which works is to make stuff fail hard or slow it down in a way which makes it annoying enough to users to complain. He was talking about WBINVD. But it made me think about how we use the split lock detection feature in Linux. Existing code has three options for applications: 1) Don't enable split lock detection (allow arbitrary split locks) 2) Warn once when a process uses split lock, but let the process keep running with split lock detection disabled 3) Kill process that use split locks Option 2 falls into the "wishful thinking" territory that Thomas warns does nothing. But option 3 might not be viable in a situation with legacy applications that need to run. Hence make option 2 much stricter to "slow it down in a way which makes it annoying". Primary reason for this change is to provide better quality of service to the rest of the applications running on the system. Internal testing shows that even with many processes splitting locks, performance for the rest of the system is much more responsive. The new "warn" mode operates like this. When an application tries to execute a bus lock the #AC handler. 1) Delays (interruptibly) 10 ms before moving to next step. 2) Blocks (interruptibly) until it can get the semaphore If interrupted, just return. Assume the signal will either kill the task, or direct execution away from the instruction that is trying to get the bus lock. 3) Disables split lock detection for the current core 4) Schedules a work queue to re-enable split lock detect in 2 jiffies 5) Returns The work queue that re-enables split lock detection also releases the semaphore. There is a corner case where a CPU may be taken offline while split lock detection is disabled. A CPU hotplug handler handles this case. Old behaviour was to only print the split lock warning on the first occurrence of a split lock from a task. Preserve that by adding a flag to the task structure that suppresses subsequent split lock messages from that task. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220310204854.31752-2-tony.luck@intel.com |
||
Andrey Konovalov
|
51fb34de2a |
kasan, arm64: reset pointer tags of vmapped stacks
Once tag-based KASAN modes start tagging vmalloc() allocations, kernel stacks start getting tagged if CONFIG_VMAP_STACK is enabled. Reset the tag of kernel stack pointers after allocation in arch_alloc_vmap_stack(). For SW_TAGS KASAN, when CONFIG_KASAN_STACK is enabled, the instrumentation can't handle the SP register being tagged. For HW_TAGS KASAN, there's no instrumentation-related issues. However, the impact of having a tagged SP register needs to be properly evaluated, so keep it non-tagged for now. Note, that the memory for the stack allocation still gets tagged to catch vmalloc-into-stack out-of-bounds accesses. [andreyknvl@google.com: fix case when a stack is retrieved from cached_stacks] Link: https://lkml.kernel.org/r/f50c5f96ef896d7936192c888b0c0a7674e33184.1644943792.git.andreyknvl@google.com [dan.carpenter@oracle.com: remove unnecessary check in alloc_thread_stack_node()] Link: https://lkml.kernel.org/r/20220301080706.GB17208@kili Link: https://lkml.kernel.org/r/698c5ab21743c796d46c15d075b9481825973e34.1643047180.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marco Elver <elver@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrey Konovalov
|
c08e6a1206 |
kasan, fork: reset pointer tags of vmapped stacks
Once tag-based KASAN modes start tagging vmalloc() allocations, kernel stacks start getting tagged if CONFIG_VMAP_STACK is enabled. Reset the tag of kernel stack pointers after allocation in alloc_thread_stack_node(). For SW_TAGS KASAN, when CONFIG_KASAN_STACK is enabled, the instrumentation can't handle the SP register being tagged. For HW_TAGS KASAN, there's no instrumentation-related issues. However, the impact of having a tagged SP register needs to be properly evaluated, so keep it non-tagged for now. Note, that the memory for the stack allocation still gets tagged to catch vmalloc-into-stack out-of-bounds accesses. Link: https://lkml.kernel.org/r/c6c96f012371ecd80e1936509ebcd3b07a5956f7.1643047180.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Marco Elver <elver@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
169e77764a |
Networking changes for 5.18.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
||
Jakub Kicinski
|
0db8640df5 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says: ==================== pull-request: bpf-next 2022-03-21 v2 We've added 137 non-merge commits during the last 17 day(s) which contain a total of 143 files changed, 7123 insertions(+), 1092 deletions(-). The main changes are: 1) Custom SEC() handling in libbpf, from Andrii. 2) subskeleton support, from Delyan. 3) Use btf_tag to recognize __percpu pointers in the verifier, from Hao. 4) Fix net.core.bpf_jit_harden race, from Hou. 5) Fix bpf_sk_lookup remote_port on big-endian, from Jakub. 6) Introduce fprobe (multi kprobe) _without_ arch bits, from Masami. The arch specific bits will come later. 7) Introduce multi_kprobe bpf programs on top of fprobe, from Jiri. 8) Enable non-atomic allocations in local storage, from Joanne. 9) Various var_off ptr_to_btf_id fixed, from Kumar. 10) bpf_ima_file_hash helper, from Roberto. 11) Add "live packet" mode for XDP in BPF_PROG_RUN, from Toke. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (137 commits) selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" bpftool: Fix a bug in subskeleton code generation bpf: Fix bpf_prog_pack when PMU_SIZE is not defined bpf: Fix bpf_prog_pack for multi-node setup bpf: Fix warning for cast from restricted gfp_t in verifier bpf, arm: Fix various typos in comments libbpf: Close fd in bpf_object__reuse_map bpftool: Fix print error when show bpf map bpf: Fix kprobe_multi return probe backtrace Revert "bpf: Add support to inline bpf_get_func_ip helper on x86" bpf: Simplify check in btf_parse_hdr() selftests/bpf/test_lirc_mode2.sh: Exit with proper code bpf: Check for NULL return from bpf_get_btf_vmlinux selftests/bpf: Test skipping stacktrace bpf: Adjust BPF stack helper functions to accommodate skip > 0 bpf: Select proper size for bpf_prog_pack ... ==================== Link: https://lore.kernel.org/r/20220322050159.5507-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
bba90e0964 |
Core code updates:
- Reduce the amount of work to release a task stack in context
switch. There is no real reason to do cgroup accounting and memory
freeing in this performance sensitive context. Aside of this the
invoked functions cannot be called from this preemption disabled
context on PREEMPT_RT enabled kernels. Solve this by moving the
accounting into do_exit() and delaying the freeing of the stack unless
the vmap stack can be cached.
- Provide a mechanism to delay raising signals from atomic context on
PREEMPT_RT enabled kernels as sighand::lock cannot be acquired. Store
the information in the task struct and raise it in the exit path.
-----BEGIN PGP SIGNATURE-----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=uGTc
-----END PGP SIGNATURE-----
Merge tag 'core-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core process handling RT latency updates from Thomas Gleixner:
- Reduce the amount of work to release a task stack in context switch.
There is no real reason to do cgroup accounting and memory freeing in
this performance sensitive context.
Aside of this the invoked functions cannot be called from this
preemption disabled context on PREEMPT_RT enabled kernels. Solve this
by moving the accounting into do_exit() and delaying the freeing of
the stack unless the vmap stack can be cached.
- Provide a mechanism to delay raising signals from atomic context on
PREEMPT_RT enabled kernels as sighand::lock cannot be acquired. Store
the information in the task struct and raise it in the exit path.
* tag 'core-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
signal, x86: Delay calling signals in atomic on RT enabled kernels
fork: Use IS_ENABLED() in account_kernel_stack()
fork: Only cache the VMAP stack in finish_task_switch()
fork: Move task stack accounting to do_exit()
fork: Move memcg_charge_kernel_stack() into CONFIG_VMAP_STACK
fork: Don't assign the stack pointer in dup_task_struct()
fork, IA64: Provide alloc_thread_stack_node() for IA64
fork: Duplicate task_struct before stack allocation
fork: Redo ifdefs around task stack handling
|
||
|
Linus Torvalds
|
3fd33273a4 |
Reenable ENQCMD/PASID support:
- Simplify the PASID handling to allocate the PASID once, associate it to
the mm of a process and free it on mm_exit(). The previous attempt of
refcounted PASIDs and dynamic alloc()/free() turned out to be error
prone and too complex. The PASID space is 20bits, so the case of
resource exhaustion is a pure academic concern.
- Populate the PASID MSR on demand via #GP to avoid racy updates via IPIs.
- Reenable ENQCMD and let objtool check for the forbidden usage of ENQCMD
in the kernel.
- Update the documentation for Shared Virtual Addressing accordingly.
-----BEGIN PGP SIGNATURE-----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=Dy8V
-----END PGP SIGNATURE-----
Merge tag 'x86-pasid-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PASID support from Thomas Gleixner:
"Reenable ENQCMD/PASID support:
- Simplify the PASID handling to allocate the PASID once, associate
it to the mm of a process and free it on mm_exit().
The previous attempt of refcounted PASIDs and dynamic
alloc()/free() turned out to be error prone and too complex. The
PASID space is 20bits, so the case of resource exhaustion is a pure
academic concern.
- Populate the PASID MSR on demand via #GP to avoid racy updates via
IPIs.
- Reenable ENQCMD and let objtool check for the forbidden usage of
ENQCMD in the kernel.
- Update the documentation for Shared Virtual Addressing accordingly"
* tag 'x86-pasid-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Update documentation for SVA (Shared Virtual Addressing)
tools/objtool: Check for use of the ENQCMD instruction in the kernel
x86/cpufeatures: Re-enable ENQCMD
x86/traps: Demand-populate PASID MSR via #GP
sched: Define and initialize a flag to identify valid PASID in the task
x86/fpu: Clear PASID when copying fpstate
iommu/sva: Assign a PASID to mm on PASID allocation and free it on mm exit
kernel/fork: Initialize mm's PASID
iommu/ioasid: Introduce a helper to check for valid PASIDs
mm: Change CONFIG option for mm->pasid field
iommu/sva: Rename CONFIG_IOMMU_SVA_LIB to CONFIG_IOMMU_SVA
|
||
Masami Hiramatsu
|
54ecbe6f1e |
rethook: Add a generic return hook
Add a return hook framework which hooks the function return. Most of the logic came from the kretprobe, but this is independent from kretprobe. Note that this is expected to be used with other function entry hooking feature, like ftrace, fprobe, adn kprobes. Eventually this will replace the kretprobe (e.g. kprobe + rethook = kretprobe), but at this moment, this is just an additional hook. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/164735285066.1084943.9259661137330166643.stgit@devnote2 |
||
Suren Baghdasaryan
|
5c26f6ac94 |
mm: refactor vm_area_struct::anon_vma_name usage code
Avoid mixing strings and their anon_vma_name referenced pointers by using struct anon_vma_name whenever possible. This simplifies the code and allows easier sharing of anon_vma_name structures when they represent the same name. [surenb@google.com: fix comment] Link: https://lkml.kernel.org/r/20220223153613.835563-1-surenb@google.com Link: https://lkml.kernel.org/r/20220224231834.1481408-1-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Colin Cross <ccross@google.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Alexey Gladkov <legion@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Chris Hyser <chris.hyser@oracle.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Collingbourne <pcc@google.com> Cc: Xiaofeng Cao <caoxiaofeng@yulong.com> Cc: David Hildenbrand <david@redhat.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Sebastian Andrzej Siewior
|
0ce055f853 |
fork: Use IS_ENABLED() in account_kernel_stack()
Not strickly needed but checking CONFIG_VMAP_STACK instead of task_stack_vm_area()' result allows the compiler the remove the else path in the CONFIG_VMAP_STACK case where the pointer can't be NULL. Check for CONFIG_VMAP_STACK in order to use the proper path. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-9-bigeasy@linutronix.de |
||
|
Sebastian Andrzej Siewior
|
e540bf3162 |
fork: Only cache the VMAP stack in finish_task_switch()
The task stack could be deallocated later, but for fork()/exec() kind of workloads (say a shell script executing several commands) it is important that the stack is released in finish_task_switch() so that in VMAP_STACK case it can be cached and reused in the new task. For PREEMPT_RT it would be good if the wake-up in vfree_atomic() could be avoided in the scheduling path. Far worse are the other free_thread_stack() implementations which invoke __free_pages()/ kmem_cache_free() with disabled preemption. Cache the stack in free_thread_stack() in the VMAP_STACK case and RCU-delay the free path otherwise. Free the stack in the RCU callback. In the VMAP_STACK case this is another opportunity to fill the cache. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-8-bigeasy@linutronix.de |
||
|
Sebastian Andrzej Siewior
|
1a03d3f13f |
fork: Move task stack accounting to do_exit()
There is no need to perform the stack accounting of the outgoing task in its final schedule() invocation which happens with preemption disabled. The task is leaving, the resources will be freed and the accounting can happen in do_exit() before the actual schedule invocation which frees the stack memory. Move the accounting of the stack memory from release_task_stack() to exit_task_stack_account() which then can be invoked from do_exit(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-7-bigeasy@linutronix.de |
||
|
Sebastian Andrzej Siewior
|
f1c1a9ee00 |
fork: Move memcg_charge_kernel_stack() into CONFIG_VMAP_STACK
memcg_charge_kernel_stack() is only used in the CONFIG_VMAP_STACK case. Move memcg_charge_kernel_stack() into the CONFIG_VMAP_STACK block and invoke it from within alloc_thread_stack_node(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-6-bigeasy@linutronix.de |
||
|
Sebastian Andrzej Siewior
|
7865aba3ad |
fork: Don't assign the stack pointer in dup_task_struct()
All four versions of alloc_thread_stack_node() assign now task_struct::stack in case the allocation was successful. Let alloc_thread_stack_node() return an error code instead of the stack pointer and remove the stack assignment in dup_task_struct(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-5-bigeasy@linutronix.de |
||
|
Sebastian Andrzej Siewior
|
2bb0529c0b |
fork, IA64: Provide alloc_thread_stack_node() for IA64
Provide a generic alloc_thread_stack_node() for IA64 and CONFIG_ARCH_THREAD_STACK_ALLOCATOR which returns stack pointer and sets task_struct::stack so it behaves exactly like the other implementations. Rename IA64's alloc_thread_stack_node() and add the generic version to the fork code so it is in one place _and_ to drastically lower the chances of fat fingering the IA64 code. Do the same for free_thread_stack(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-4-bigeasy@linutronix.de |
||
|
Sebastian Andrzej Siewior
|
546c42b2c5 |
fork: Duplicate task_struct before stack allocation
alloc_thread_stack_node() already populates the task_struct::stack member except on IA64. The stack pointer is saved and populated again because IA64 needs it and arch_dup_task_struct() overwrites it. Allocate thread's stack after task_struct has been duplicated as a preparation for further changes. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-3-bigeasy@linutronix.de |
||
|
Sebastian Andrzej Siewior
|
be9a2277ca |
fork: Redo ifdefs around task stack handling
The use of ifdef CONFIG_VMAP_STACK is confusing in terms what is actually happenning and what can happen. For instance from reading free_thread_stack() it appears that in the CONFIG_VMAP_STACK case it may receive a non-NULL vm pointer but it may also be NULL in which case __free_pages() is used to free the stack. This is however not the case because in the VMAP case a non-NULL pointer is always returned here. Since it looks like this might happen, the compiler creates the correct dead code with the invocation to __free_pages() and everything around it. Twice. Add spaces between the ifdef and the identifer to recognize the ifdef level which is currently in scope. Add the current identifer as a comment behind #else and #endif. Move the code within free_thread_stack() and alloc_thread_stack_node() into the relevant ifdef blocks. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-2-bigeasy@linutronix.de |
||
|
Linus Torvalds
|
0b0894ff78 |
- Fix task exposure order when forking tasks
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmISLs0ACgkQEsHwGGHe VUrq+g/+NxLVl3QTmteNh4jEzA/3FDccRKbALNs09YX116nCOZ1sv1Z5FgtdOLUT ukIujAm1SKDXQrXoglmm3eH6ylWZ54DQo6qrP+vzavtIKSgbt+vPS63qDR4ehF8N Kh04qssWy+AzOSeZRQ6lXTiGei2nBKFbiwlwPnV5vbQmLBFvzv2dEErVFYkHwWN6 foygRUOhslv5aizwpDriAvDq9ZTVUPXqzIi5zWnTON8y8Vy32eZjSJKez8SQH57w vbEZkJTw33tCzG/5+J5mh3UmP9Mcj34W/GDCKHxjO1Y38SbLTMy2Agl5hbRKjVZ8 W4wElyXyXtLx1RsrZpOJ90mhqwADcxLgkq4ipl6uzikeQlQVnOOBsHZOi3NkTorg 1YhpxZhqzWWotdGUQwzfZYSuoqQAyUxeqZKwqUD+dYsEqQWhTWSa41IWcfz+r8UD uD+pO03EbAEzBB+BSJL9xh0xnchdOnHbpTSFo1AJeQ+LUKanXxO2tXk9/3SwliMj M751vPtQH6DiVukSfywxJym+aaLbjeju6RvA69Atap51roYXPSsaCHGDwLeNUS+w 5D6KC0IuCxsliLpAD4c4PXkRdTvwnG/0lUt+s83bGnyfh5nQzfXXbBp3I5+o0Fcq jIQ37uH2Mj5MKtmC8o4ekCtNTtWM8QNZvKzMzoju616Wqee0Ag4= =RagE -----END PGP SIGNATURE----- Merge tag 'sched_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: "Fix task exposure order when forking tasks" * tag 'sched_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix yet more sched_fork() races |
||
|
Linus Torvalds
|
c1034d249d |
pidfd.v5.17-rc4
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYhDKMgAKCRCRxhvAZXjc
opUwAPwORv7MD8rh5va7LFWUxX1UFpxVILWcC1umuhHAOKZ7YAEA3DTYFrQZhxA2
nMBR6hBEDKRARIFv3zHZYflYK97FnQA=
=NPXo
-----END PGP SIGNATURE-----
Merge tag 'pidfd.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd fix from Christian Brauner:
"This fixes a problem reported by lockdep when installing a pidfd via
fd_install() with siglock and the tasklisk write lock held in
copy_process() when calling clone()/clone3() with CLONE_PIDFD.
Originally a pidfd was created prior to holding any of these locks but
this required a call to ksys_close(). So quite some time ago in
|
||
Peter Zijlstra
|
b1e8206582 |
sched: Fix yet more sched_fork() races
Where commit |
||
|
Eric W. Biederman
|
8f2f9c4d82 |
ucounts: Enforce RLIMIT_NPROC not RLIMIT_NPROC+1
Michal Koutný <mkoutny@suse.com> wrote: > It was reported that v5.14 behaves differently when enforcing > RLIMIT_NPROC limit, namely, it allows one more task than previously. > This is consequence of the commit |
||
|
Peter Zijlstra
|
a3d29e8291 |
sched: Define and initialize a flag to identify valid PASID in the task
Add a new single bit field to the task structure to track whether this task has initialized the IA32_PASID MSR to the mm's PASID. Initialize the field to zero when creating a new task with fork/clone. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220207230254.3342514-8-fenghua.yu@intel.com |
||
|
Fenghua Yu
|
701fac4038 |
iommu/sva: Assign a PASID to mm on PASID allocation and free it on mm exit
PASIDs are process-wide. It was attempted to use refcounted PASIDs to free them when the last thread drops the refcount. This turned out to be complex and error prone. Given the fact that the PASID space is 20 bits, which allows up to 1M processes to have a PASID associated concurrently, PASID resource exhaustion is not a realistic concern. Therefore, it was decided to simplify the approach and stick with lazy on demand PASID allocation, but drop the eager free approach and make an allocated PASID's lifetime bound to the lifetime of the process. Get rid of the refcounting mechanisms and replace/rename the interfaces to reflect this new approach. [ bp: Massage commit message. ] Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20220207230254.3342514-6-fenghua.yu@intel.com |
||
|
Fenghua Yu
|
a6cbd44093 |
kernel/fork: Initialize mm's PASID
A new mm doesn't have a PASID yet when it's created. Initialize the mm's PASID on fork() or for init_mm to INVALID_IOASID (-1). INIT_PASID (0) is reserved for kernel legacy DMA PASID. It cannot be allocated to a user process. Initializing the process's PASID to 0 may cause confusion that's why the process uses the reserved kernel legacy DMA PASID. Initializing the PASID to INVALID_IOASID (-1) explicitly tells the process doesn't have a valid PASID yet. Even though the only user of mm_pasid_init() is in fork.c, define it in <linux/sched/mm.h> as the first of three mm/pasid life cycle functions (init/set/drop) to keep these all together. Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220207230254.3342514-5-fenghua.yu@intel.com |
||
|
Fenghua Yu
|
7a853c2d59 |
mm: Change CONFIG option for mm->pasid field
This currently depends on CONFIG_IOMMU_SUPPORT. But it is only needed when CONFIG_IOMMU_SVA option is enabled. Change the CONFIG guards around definition and initialization of mm->pasid field. Suggested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20220207230254.3342514-3-fenghua.yu@intel.com |
||
Waiman Long
|
ddc204b517
|
copy_process(): Move fd_install() out of sighand->siglock critical section
I was made aware of the following lockdep splat: [ 2516.308763] ===================================================== [ 2516.309085] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 2516.309433] 5.14.0-51.el9.aarch64+debug #1 Not tainted [ 2516.309703] ----------------------------------------------------- [ 2516.310149] stress-ng/153663 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 2516.310512] ffff0000e422b198 (&newf->file_lock){+.+.}-{2:2}, at: fd_install+0x368/0x4f0 [ 2516.310944] and this task is already holding: [ 2516.311248] ffff0000c08140d8 (&sighand->siglock){-.-.}-{2:2}, at: copy_process+0x1e2c/0x3e80 [ 2516.311804] which would create a new lock dependency: [ 2516.312066] (&sighand->siglock){-.-.}-{2:2} -> (&newf->file_lock){+.+.}-{2:2} [ 2516.312446] but this new dependency connects a HARDIRQ-irq-safe lock: [ 2516.312983] (&sighand->siglock){-.-.}-{2:2} : [ 2516.330700] Possible interrupt unsafe locking scenario: [ 2516.331075] CPU0 CPU1 [ 2516.331328] ---- ---- [ 2516.331580] lock(&newf->file_lock); [ 2516.331790] local_irq_disable(); [ 2516.332231] lock(&sighand->siglock); [ 2516.332579] lock(&newf->file_lock); [ 2516.332922] <Interrupt> [ 2516.333069] lock(&sighand->siglock); [ 2516.333291] *** DEADLOCK *** [ 2516.389845] stack backtrace: [ 2516.390101] CPU: 3 PID: 153663 Comm: stress-ng Kdump: loaded Not tainted 5.14.0-51.el9.aarch64+debug #1 [ 2516.390756] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2516.391155] Call trace: [ 2516.391302] dump_backtrace+0x0/0x3e0 [ 2516.391518] show_stack+0x24/0x30 [ 2516.391717] dump_stack_lvl+0x9c/0xd8 [ 2516.391938] dump_stack+0x1c/0x38 [ 2516.392247] print_bad_irq_dependency+0x620/0x710 [ 2516.392525] check_irq_usage+0x4fc/0x86c [ 2516.392756] check_prev_add+0x180/0x1d90 [ 2516.392988] validate_chain+0x8e0/0xee0 [ 2516.393215] __lock_acquire+0x97c/0x1e40 [ 2516.393449] lock_acquire.part.0+0x240/0x570 [ 2516.393814] lock_acquire+0x90/0xb4 [ 2516.394021] _raw_spin_lock+0xe8/0x154 [ 2516.394244] fd_install+0x368/0x4f0 [ 2516.394451] copy_process+0x1f5c/0x3e80 [ 2516.394678] kernel_clone+0x134/0x660 [ 2516.394895] __do_sys_clone3+0x130/0x1f4 [ 2516.395128] __arm64_sys_clone3+0x5c/0x7c [ 2516.395478] invoke_syscall.constprop.0+0x78/0x1f0 [ 2516.395762] el0_svc_common.constprop.0+0x22c/0x2c4 [ 2516.396050] do_el0_svc+0xb0/0x10c [ 2516.396252] el0_svc+0x24/0x34 [ 2516.396436] el0t_64_sync_handler+0xa4/0x12c [ 2516.396688] el0t_64_sync+0x198/0x19c [ 2517.491197] NET: Registered PF_ATMPVC protocol family [ 2517.491524] NET: Registered PF_ATMSVC protocol family [ 2591.991877] sched: RT throttling activated One way to solve this problem is to move the fd_install() call out of the sighand->siglock critical section. Before commit |
||
|
Linus Torvalds
|
35ce8ae9ae |
Merge branch 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
|
||
|
Linus Torvalds
|
f56caedaf9 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "146 patches. Subsystems affected by this patch series: kthread, ia64, scripts, ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak, dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap, memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb, userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp, ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits) mm/damon: hide kernel pointer from tracepoint event mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging mm/damon/dbgfs: remove an unnecessary variable mm/damon: move the implementation of damon_insert_region to damon.h mm/damon: add access checking for hugetlb pages Docs/admin-guide/mm/damon/usage: update for schemes statistics mm/damon/dbgfs: support all DAMOS stats Docs/admin-guide/mm/damon/reclaim: document statistics parameters mm/damon/reclaim: provide reclamation statistics mm/damon/schemes: account how many times quota limit has exceeded mm/damon/schemes: account scheme actions that successfully applied mm/damon: remove a mistakenly added comment for a future feature Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning Docs/admin-guide/mm/damon/usage: remove redundant information Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks mm/damon: convert macro functions to static inline functions mm/damon: modify damon_rand() macro to static inline function mm/damon: move damon_rand() definition into damon.h ... |
||
Arnd Bergmann
|
17fca131ce |
mm: move anon_vma declarations to linux/mm_inline.h
The patch to add anonymous vma names causes a build failure in some
configurations:
include/linux/mm_types.h: In function 'is_same_vma_anon_name':
include/linux/mm_types.h:924:37: error: implicit declaration of function 'strcmp' [-Werror=implicit-function-declaration]
924 | return name && vma_name && !strcmp(name, vma_name);
| ^~~~~~
include/linux/mm_types.h:22:1: note: 'strcmp' is defined in header '<string.h>'; did you forget to '#include <string.h>'?
This should not really be part of linux/mm_types.h in the first place,
as that header is meant to only contain structure defintions and need a
minimum set of indirect includes itself.
While the header clearly includes more than it should at this point,
let's not make it worse by including string.h as well, which would pull
in the expensive (compile-speed wise) fortify-string logic.
Move the new functions into a separate header that only needs to be
included in a couple of locations.
Link: https://lkml.kernel.org/r/20211207125710.2503446-1-arnd@kernel.org
Fixes: "mm: add a field to store names for private anonymous memory"
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Colin Cross <ccross@google.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Colin Cross
|
9a10064f56 |
mm: add a field to store names for private anonymous memory
In many userspace applications, and especially in VM based applications like Android uses heavily, there are multiple different allocators in use. At a minimum there is libc malloc and the stack, and in many cases there are libc malloc, the stack, direct syscalls to mmap anonymous memory, and multiple VM heaps (one for small objects, one for big objects, etc.). Each of these layers usually has its own tools to inspect its usage; malloc by compiling a debug version, the VM through heap inspection tools, and for direct syscalls there is usually no way to track them. On Android we heavily use a set of tools that use an extended version of the logic covered in Documentation/vm/pagemap.txt to walk all pages mapped in userspace and slice their usage by process, shared (COW) vs. unique mappings, backing, etc. This can account for real physical memory usage even in cases like fork without exec (which Android uses heavily to share as many private COW pages as possible between processes), Kernel SamePage Merging, and clean zero pages. It produces a measurement of the pages that only exist in that process (USS, for unique), and a measurement of the physical memory usage of that process with the cost of shared pages being evenly split between processes that share them (PSS). If all anonymous memory is indistinguishable then figuring out the real physical memory usage (PSS) of each heap requires either a pagemap walking tool that can understand the heap debugging of every layer, or for every layer's heap debugging tools to implement the pagemap walking logic, in which case it is hard to get a consistent view of memory across the whole system. Tracking the information in userspace leads to all sorts of problems. It either needs to be stored inside the process, which means every process has to have an API to export its current heap information upon request, or it has to be stored externally in a filesystem that somebody needs to clean up on crashes. It needs to be readable while the process is still running, so it has to have some sort of synchronization with every layer of userspace. Efficiently tracking the ranges requires reimplementing something like the kernel vma trees, and linking to it from every layer of userspace. It requires more memory, more syscalls, more runtime cost, and more complexity to separately track regions that the kernel is already tracking. This patch adds a field to /proc/pid/maps and /proc/pid/smaps to show a userspace-provided name for anonymous vmas. The names of named anonymous vmas are shown in /proc/pid/maps and /proc/pid/smaps as [anon:<name>]. Userspace can set the name for a region of memory by calling prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME, start, len, (unsigned long)name) Setting the name to NULL clears it. The name length limit is 80 bytes including NUL-terminator and is checked to contain only printable ascii characters (including space), except '[',']','\','$' and '`'. Ascii strings are being used to have a descriptive identifiers for vmas, which can be understood by the users reading /proc/pid/maps or /proc/pid/smaps. Names can be standardized for a given system and they can include some variable parts such as the name of the allocator or a library, tid of the thread using it, etc. The name is stored in a pointer in the shared union in vm_area_struct that points to a null terminated string. Anonymous vmas with the same name (equivalent strings) and are otherwise mergeable will be merged. The name pointers are not shared between vmas even if they contain the same name. The name pointer is stored in a union with fields that are only used on file-backed mappings, so it does not increase memory usage. CONFIG_ANON_VMA_NAME kernel configuration is introduced to enable this feature. It keeps the feature disabled by default to prevent any additional memory overhead and to avoid confusing procfs parsers on systems which are not ready to support named anonymous vmas. The patch is based on the original patch developed by Colin Cross, more specifically on its latest version [1] posted upstream by Sumit Semwal. It used a userspace pointer to store vma names. In that design, name pointers could be shared between vmas. However during the last upstreaming attempt, Kees Cook raised concerns [2] about this approach and suggested to copy the name into kernel memory space, perform validity checks [3] and store as a string referenced from vm_area_struct. One big concern is about fork() performance which would need to strdup anonymous vma names. Dave Hansen suggested experimenting with worst-case scenario of forking a process with 64k vmas having longest possible names [4]. I ran this experiment on an ARM64 Android device and recorded a worst-case regression of almost 40% when forking such a process. This regression is addressed in the followup patch which replaces the pointer to a name with a refcounted structure that allows sharing the name pointer between vmas of the same name. Instead of duplicating the string during fork() or when splitting a vma it increments the refcount. [1] https://lore.kernel.org/linux-mm/20200901161459.11772-4-sumit.semwal@linaro.org/ [2] https://lore.kernel.org/linux-mm/202009031031.D32EF57ED@keescook/ [3] https://lore.kernel.org/linux-mm/202009031022.3834F692@keescook/ [4] https://lore.kernel.org/linux-mm/5d0358ab-8c47-2f5f-8e43-23b89d6a8e95@intel.com/ Changes for prctl(2) manual page (in the options section): PR_SET_VMA Sets an attribute specified in arg2 for virtual memory areas starting from the address specified in arg3 and spanning the size specified in arg4. arg5 specifies the value of the attribute to be set. Note that assigning an attribute to a virtual memory area might prevent it from being merged with adjacent virtual memory areas due to the difference in that attribute's value. Currently, arg2 must be one of: PR_SET_VMA_ANON_NAME Set a name for anonymous virtual memory areas. arg5 should be a pointer to a null-terminated string containing the name. The name length including null byte cannot exceed 80 bytes. If arg5 is NULL, the name of the appropriate anonymous virtual memory areas will be reset. The name can contain only printable ascii characters (including space), except '[',']','\','$' and '`'. This feature is available only if the kernel is built with the CONFIG_ANON_VMA_NAME option enabled. [surenb@google.com: docs: proc.rst: /proc/PID/maps: fix malformed table] Link: https://lkml.kernel.org/r/20211123185928.2513763-1-surenb@google.com [surenb: rebased over v5.15-rc6, replaced userpointer with a kernel copy, added input sanitization and CONFIG_ANON_VMA_NAME config. The bulk of the work here was done by Colin Cross, therefore, with his permission, keeping him as the author] Link: https://lkml.kernel.org/r/20211019215511.3771969-2-surenb@google.com Signed-off-by: Colin Cross <ccross@google.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Glauber <jan.glauber@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Landley <rob@landley.net> Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com> Cc: Shaohua Li <shli@fusionio.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Eric W. Biederman
|
2873cd31a2 |
exit: Remove profile_handoff_task
All profile_handoff_task does is notify the task_free_notifier chain. The helpers task_handoff_register and task_handoff_unregister are used to add and delete entries from that chain and are never called. So remove the dead code and make it much easier to read and reason about __put_task_struct. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/87fspyw6m0.fsf@email.froward.int.ebiederm.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
||
|
Eric W. Biederman
|
e32cf5dfbe |
kthread: Generalize pf_io_worker so it can point to struct kthread
The point of using set_child_tid to hold the kthread pointer was that it already did what is necessary. There are now restrictions on when set_child_tid can be initialized and when set_child_tid can be used in schedule_tail. Which indicates that continuing to use set_child_tid to hold the kthread pointer is a bad idea. Instead of continuing to use the set_child_tid field of task_struct generalize the pf_io_worker field of task_struct and use it to hold the kthread pointer. Rename pf_io_worker (which is a void * pointer) to worker_private so it can be used to store kthreads struct kthread pointer. Update the kthread code to store the kthread pointer in the worker_private field. Remove the places where set_child_tid had to be dealt with carefully because kthreads also used it. Link: https://lkml.kernel.org/r/CAHk-=wgtFAA9SbVYg0gR1tqPMC17-NYcs0GQkaYg1bGhh1uJQQ@mail.gmail.com Link: https://lkml.kernel.org/r/87a6grvqy8.fsf_-_@email.froward.int.ebiederm.org Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
||
|
Eric W. Biederman
|
ff8288ff47 |
fork: Rename bad_fork_cleanup_threadgroup_lock to bad_fork_cleanup_delayacct
I just fixed a bug in copy_process when using the label
bad_fork_cleanup_threadgroup_lock. While fixing the bug I looked
closer at the label and realized it has been misnamed since
|
||
|
Eric W. Biederman
|
6692c98c7d |
fork: Stop protecting back_fork_cleanup_cgroup_lock with CONFIG_NUMA
Mark Brown <broonie@kernel.org> reported:
> This is also causing further build errors including but not limited to:
>
> /tmp/next/build/kernel/fork.c: In function 'copy_process':
> /tmp/next/build/kernel/fork.c:2106:4: error: label 'bad_fork_cleanup_threadgroup_lock' used but not defined
> 2106 | goto bad_fork_cleanup_threadgroup_lock;
> | ^~~~
It turns out that I messed up and was depending upon a label protected
by an ifdef. Move the label out of the ifdef as the ifdef around the label
no longer makes sense (if it ever did).
Link: https://lkml.kernel.org/r/YbugCP144uxXvRsk@sirena.org.uk
Fixes:
|
||
|
Eric W. Biederman
|
40966e316f |
kthread: Ensure struct kthread is present for all kthreads
Today the rules are a bit iffy and arbitrary about which kernel threads have struct kthread present. Both idle threads and thread started with create_kthread want struct kthread present so that is effectively all kernel threads. Make the rule that if PF_KTHREAD and the task is running then struct kthread is present. This will allow the kernel thread code to using tsk->exit_code with different semantics from ordinary processes. To make ensure that struct kthread is present for all kernel threads move it's allocation into copy_process. Add a deallocation of struct kthread in exec for processes that were kernel threads. Move the allocation of struct kthread for the initial thread earlier so that it is not repeated for each additional idle thread. Move the initialization of struct kthread into set_kthread_struct so that the structure is always and reliably initailized. Clear set_child_tid in free_kthread_struct to ensure the kthread struct is reliably freed during exec. The function free_kthread_struct does not need to clear vfork_done during exec as exec_mm_release called from exec_mmap has already cleared vfork_done. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |