Add an --order switch to control section reordering.
Default for --order is off.
Change the default ordering to a slightly more sensible:
M: Person acting as a maintainer
R: Person acting as a patch reviewer
L: Mailing list where patches should be sent
S: Maintenance status
W: URI for general information
Q: URI for patchwork tracking
B: URI for bug tracking/submission
C: URI for chat
P: URI or file for subsystem specific coding styles
T: SCM tree type and location
F: File and directory pattern
X: File and directory exclusion pattern
N: File glob
K: Keyword - patch content regex
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
Some .gitignore files have comments like "Generated files",
"Ignore generated files" at the header part, but they are
too obvious.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor Makefile.dtbinst so it looks similar to other Makefiles.
*.dtb should not be a phony target. Copy files based on the timestamps.
Print installed dtb paths instead of in-kernel dtb paths.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'dtbinst_root' is used to remember the root of the in-kernel dts
directory (i.e. arch/*/boot/dts), but it looks clumsy.
I prefer using two variables 'obj' and 'dst' to track the in-kernel
directory and the install destination, respectively.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In the process of creating the source file of a module modpost injects a
set of includes that are not required if the compilation unit is
statically built into the kernel.
The order of inclusion of the headers can cause redefinition problems
(e.g.):
In file included from include/linux/elf.h:5:0,
from include/linux/module.h:18,
from crypto/arc4.mod.c:2:
#define ELF_OSABI ELFOSABI_LINUX
In file included from include/linux/elfnote.h:62:0,
from include/linux/build-salt.h:4,
from crypto/arc4.mod.c:1:
include/uapi/linux/elf.h:363:0: note: this is the location of
the previous definition
#define ELF_OSABI ELFOSABI_NONE
The issue was exposed during the development of the series [1].
[1] https://lore.kernel.org/lkml/20200306133242.26279-1-vincenzo.frascino@arm.com/
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Link: https://lkml.kernel.org/r/20200320145351.32292-17-vincenzo.frascino@arm.com
This switches atomic-instrumented.h to use the generic instrumentation
wrappers provided by instrumented.h.
No functional change intended.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- fix __uint128_t capability test in Kconfig when GCC that defaults
to 32-bit is used to build the 64-bit kernel
- suppress new noisy Clang warnings -Wpointer-to-enum-cast
- move the namespace field in Module.symvers for the backward
compatibility reason for the depmod tool
- use available compression for initramdisk when INTRAMFS_SOURCE
is defined, which was the original behavior
- fix modpost to handle correct large section numbers when it refers
to modversion CRCs and module namespaces
- fix comments and documents
-----BEGIN PGP SIGNATURE-----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=JTWI
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix __uint128_t capability test in Kconfig when GCC that defaults to
32-bit is used to build the 64-bit kernel
- suppress new noisy Clang warnings -Wpointer-to-enum-cast
- move the namespace field in Module.symvers for the backward
compatibility reason for the depmod tool
- use available compression for initramdisk when INTRAMFS_SOURCE is
defined, which was the original behavior
- fix modpost to handle correct large section numbers when it refers to
modversion CRCs and module namespaces
- fix comments and documents
* tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts/kallsyms: fix wrong kallsyms_relative_base
modpost: Get proper section index by get_secindex() instead of st_shndx
initramfs: restore default compression behavior
modpost: move the namespace field in Module.symvers last
kbuild: Disable -Wpointer-to-enum-cast
kbuild: doc: fix references to other documents
int128: fix __uint128_t compiler test in Kconfig
kconfig: introduce m32-flag and m64-flag
kbuild: Fix inconsistent comment
There is the code in the read_symbol function in 'scripts/kallsyms.c':
if (is_ignored_symbol(name, type))
return NULL;
/* Ignore most absolute/undefined (?) symbols. */
if (strcmp(name, "_text") == 0)
_text = addr;
But the is_ignored_symbol function returns true for name="_text" and
type='A'. So the next condition is not executed and the _text variable
is always zero.
It makes the wrong kallsyms_relative_base symbol as a result of the code
(CONFIG_KALLSYMS_BASE_RELATIVE is defined):
if (base_relative) {
output_label("kallsyms_relative_base");
output_address(relative_base);
printf("\n");
}
Because the output_address function uses the _text variable.
So the kallsyms_lookup function and all related functions in the kernel
do not work properly. For example, the stack trace in oops:
Call Trace:
[aa095e58] [809feab8] kobj_ns_ops_tbl+0x7ff09ac8/0x7ff1c1c4 (unreliable)
[aa095e98] [80002b64] kobj_ns_ops_tbl+0x7f50db74/0x80000010
[aa095ef8] [809c3d24] kobj_ns_ops_tbl+0x7feced34/0x7ff1c1c4
[aa095f28] [80002ed0] kobj_ns_ops_tbl+0x7f50dee0/0x80000010
[aa095f38] [8000f238] kobj_ns_ops_tbl+0x7f51a248/0x80000010
The right stack trace:
Call Trace:
[aa095e58] [809feab8] module_vdu_video_init+0x2fc/0x3bc (unreliable)
[aa095e98] [80002b64] do_one_initcall+0x40/0x1f0
[aa095ef8] [809c3d24] kernel_init_freeable+0x164/0x1d8
[aa095f28] [80002ed0] kernel_init+0x14/0x124
[aa095f38] [8000f238] ret_from_kernel_thread+0x14/0x1c
[masahiroy@kernel.org:
This issue happens on binutils <= 2.22
The following commit fixed it:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d2667025dd30611514810c28bee9709e4623012a
The symbol type of _text is 'T' on binutils >= 2.23
The minimal supported binutils version for the kernel build is 2.21
]
Signed-off-by: Mikhail Petrov <Mikhail.Petrov@mir.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Simplify gen_btf logic to make it work with llvm-objcopy. The existing
'file format' and 'architecture' parsing logic is brittle and does not
work with llvm-objcopy/llvm-objdump.
'file format' output of llvm-objdump>=11 will match GNU objdump, but
'architecture' (bfdarch) may not.
.BTF in .tmp_vmlinux.btf is non-SHF_ALLOC. Add the SHF_ALLOC flag
because it is part of vmlinux image used for introspection. C code
can reference the section via linker script defined __start_BTF and
__stop_BTF. This fixes a small problem that previous .BTF had the
SHF_WRITE flag (objcopy -I binary -O elf* synthesized .data).
Additionally, `objcopy -I binary` synthesized symbols
_binary__btf_vmlinux_bin_start and _binary__btf_vmlinux_bin_stop (not
used elsewhere) are replaced with more commonplace __start_BTF and
__stop_BTF.
Add 2>/dev/null because GNU objcopy (but not llvm-objcopy) warns
"empty loadable segment detected at vaddr=0xffffffff81000000, is this intentional?"
We use a dd command to change the e_type field in the ELF header from
ET_EXEC to ET_REL so that lld will accept .btf.vmlinux.bin.o. Accepting
ET_EXEC as an input file is an extremely rare GNU ld feature that lld
does not intend to support, because this is error-prone.
The output section description .BTF in include/asm-generic/vmlinux.lds.h
avoids potential subtle orphan section placement issues and suppresses
--orphan-handling=warn warnings.
Fixes: df786c9b94 ("bpf: Force .BTF section start to zero when dumping from vmlinux")
Fixes: cb0cc635c7 ("powerpc: Include .BTF section")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Stanislav Fomichev <sdf@google.com>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://github.com/ClangBuiltLinux/linux/issues/871
Link: https://lore.kernel.org/bpf/20200318222746.173648-1-maskray@google.com
Add uevent support to MHI bus so that the client drivers can be autoloaded
by udev when the MHI devices gets created. The client drivers are
expected to provide MODULE_DEVICE_TABLE with the MHI id_table struct so
that the alias can be exported.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Link: https://lore.kernel.org/r/20200220095854.4804-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(uint16_t) st_shndx is limited to 65535(i.e. SHN_XINDEX) so sym_get_data() gets
wrong section index by st_shndx if requested symbol contains extended section
index that is more than 65535. In this case, we need to get proper section index
by .symtab_shndx section.
Module.symvers generated by building kernel with "-ffunction-sections -fdata-sections"
shows the issue.
Fixes: 56067812d5 ("kbuild: modversions: add infrastructure for emitting relative CRCs")
Fixes: e84f9fbbec ("modpost: refactor namespace_from_kstrtabns() to not hard-code section name")
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently kconfig does not have a feature that allows to detect if the
used assembler supports a specific compilation option.
Introduce 'as-option' to serve this purpose in the context of Kconfig:
config X
def_bool $(as-option,...)
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In order to preserve backwards compatability with kmod tools, we have to
move the namespace field in Module.symvers last, as the depmod -e -E
option looks at the first three fields in Module.symvers to check symbol
versions (and it's expected they stay in the original order of crc,
symbol, module).
In addition, update an ancient comment above read_dump() in modpost that
suggested that the export type field in Module.symvers was optional. I
suspect that there were historical reasons behind that comment that are
no longer accurate. We have been unconditionally printing the export
type since 2.6.18 (commit bd5cbcedf4), which is over a decade ago now.
Fix up read_dump() to treat each field as non-optional. I suspect the
original read_dump() code treated the export field as optional in order
to support pre <= 2.6.18 Module.symvers (which did not have the export
type field). Note that although symbol namespaces are optional, the
field will not be omitted from Module.symvers if a symbol does not have
a namespace. In this case, the field will simply be empty and the next
delimiter or end of line will follow.
Cc: stable@vger.kernel.org
Fixes: cb9b55d21f ("modpost: add support for symbol namespaces")
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-03-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 86 non-merge commits during the last 12 day(s) which contain
a total of 107 files changed, 5771 insertions(+), 1700 deletions(-).
The main changes are:
1) Add modify_return attach type which allows to attach to a function via
BPF trampoline and is run after the fentry and before the fexit programs
and can pass a return code to the original caller, from KP Singh.
2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher
objects to be visible in /proc/kallsyms so they can be annotated in
stack traces, from Jiri Olsa.
3) Extend BPF sockmap to allow for UDP next to existing TCP support in order
in order to enable this for BPF based socket dispatch, from Lorenz Bauer.
4) Introduce a new bpftool 'prog profile' command which attaches to existing
BPF programs via fentry and fexit hooks and reads out hardware counters
during that period, from Song Liu. Example usage:
bpftool prog profile id 337 duration 3 cycles instructions llc_misses
4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)
5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition
of a new bpf_link abstraction to keep in particular BPF tracing programs
attached even when the applicaion owning them exits, from Andrii Nakryiko.
6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering
and which returns the PID as seen by the init namespace, from Carlos Neira.
7) Refactor of RISC-V JIT code to move out common pieces and addition of a
new RV32G BPF JIT compiler, from Luke Nelson.
8) Add gso_size context member to __sk_buff in order to be able to know whether
a given skb is GSO or not, from Willem de Bruijn.
9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output
implementation but can be called from tracepoint programs, from Eelco Chaudron.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When compiling bpftool the following warning is found: "declaration of
'struct bpf_pidns_info' will not be visible outside of this function."
This patch adds struct bpf_pidns_info to type_fwds array to fix this.
Fixes: b4490c5c4e ("bpf: Added new helper bpf_get_ns_current_pid_tgid")
Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313154650.13366-1-cneirabustos@gmail.com
This adds the following commits from upstream:
87a656ae5ff9 check: Inform about missing ranges
73d6e9ecb417 libfdt: fix undefined behaviour in fdt_splice_()
2525da3dba9b Bump version to v1.6.0
62cb4ad286ff Execute tests on FreeBSD with Cirrus CI
1f9a41750883 tests: Allow running the testsuite on already installed binary / libraries
c5995ddf4c20 tests: Honour NO_YAML make variable
e4ce227e89d7 tests: Properly clean up .bak file from tests
9b75292c335c tests: Honour $(NO_PYTHON) flag from Makefile in run_tests.sh
6c253afd07d4 Encode $(NO_PYTHON) consistently with other variables
95ec8ef706bd tests: No need to explicitly pass $PYTHON from Make to run_tests.sh
2b5f62d109a2 tests: Let run_tests.sh run Python tests without Makefile assistance
76b43dcbd18a checks: Add 'dma-ranges' check
e5c92a4780c6 libfdt: Use VALID_INPUT for FDT_ERR_BADSTATE checks
e5cc26b68bc0 libfdt: Add support for disabling internal checks
28fd7590aad2 libfdt: Improve comments in some of the assumptions
fc207c32341b libfdt: Fix a few typos
0f61c72dedc4 libfdt: Allow exclusion of fdt_check_full()
f270f45fd5d2 libfdt: Add support for disabling ordering check/fixup
c18bae9a4c96 libfdt: Add support for disabling version checks
fc03c4a2e04e libfdt: Add support for disabling rollback handling
77563ae72b7c libfdt: Add support for disabling sanity checks
57bc6327b80b libfdt: Add support for disabling dtb checks
464962489dcc Add a way to control the level of checks in the code
0c5326cb2845 libfdt: De-inline fdt_header_size()
cc6a5a071504 Revert "yamltree: Ensure consistent bracketing of properties with phandles"
0e9225eb0dfe Remove redundant YYLOC global declaration
cab09eedd644 Move -DNO_VALGRIND into CPPFLAGS
0eb1cb0b531e Makefile: pass $(CFLAGS) also during dependency generation
Signed-off-by: Rob Herring <robh@kernel.org>
The Makefile.dtc and Makefile.libfdt fragments from upstream dtc aren't
used by the kernel build, so let's remove them and stop syncing them.
Signed-off-by: Rob Herring <robh@kernel.org>
The 'imply' statement may create unmet direct dependency when the
implied symbol depends on m.
[Test Code]
config FOO
tristate "foo"
imply BAZ
config BAZ
tristate "baz"
depends on BAR
config BAR
def_tristate m
config MODULES
def_bool y
option modules
If you set FOO=y, BAZ is also promoted to y, which results in the
following .config file:
CONFIG_FOO=y
CONFIG_BAZ=y
CONFIG_BAR=m
CONFIG_MODULES=y
This does not meet the dependency 'BAZ depends on BAR'.
Unlike 'select', what is worse, Kconfig never shows the
'WARNING: unmet direct dependencies detected for ...' for this case.
Because 'imply' is considered to be weaker than 'depends on', Kconfig
should take the direct dependency into account.
For clarification, describe this case in kconfig-language.rst too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
The 'imply' keyword restricts a symbol to y or n, excluding m
when it is implied by y. This is the original behavior since
commit 237e3ad0f1 ("Kconfig: Introduce the "imply" keyword").
However, the author of this feature, Nicolas Pitre, stated that
the 'imply' keyword should not impose any restrictions.
(https://lkml.org/lkml/2020/2/19/714)
I agree, and want to get rid of this tricky behavior.
Suggested-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Currently when CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n, modpost
only warns when a module is missing namespace imports. Under this
configuration, such a module cannot be loaded into the kernel anyway, as
the module loader would reject it. We might as well return a build
error when a module is missing namespace imports under
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n, so that the build
warning does not go ignored/unnoticed.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Rework modpost's logging interface by consolidating merror(), warn(), and
fatal() to use a single function, modpost_log(). Introduce different
logging levels (WARN, ERROR, FATAL) as well. The purpose of this cleanup is
to reduce code duplication when deciding whether or not to warn or error
out based on a condition.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The dt_binding_check target is located outside of the
'ifneq ($(dtstree),) ... endif' block.
So, you can run 'make dt_binding_check' on any architecture.
This makes a perfect sense because the dt-schema is arch-agnostic.
The only one problem I see is that scripts/dtc/dtc is not always built.
For example, ARCH=x86 defconfig does not define CONFIG_DTC. Kbuild
descends into scripts/dtc/ with doing nothing. Then, it fails to build
*.example.dt.yaml files.
Let's build scripts/dtc/dtc forcibly when running dt_binding_check.
The dt-schema does not depend on any CONFIG option either, so you
should be able to run dt_binding_check without the .config file.
Going forward, you can directly run 'make dt_binding_check' in a
pristine source tree.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
New bpf helper bpf_get_ns_current_pid_tgid,
This helper will return pid and tgid from current task
which namespace matches dev_t and inode number provided,
this will allows us to instrument a process inside a container.
Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200304204157.58695-3-cneirabustos@gmail.com
When a compiler supports multiple architectures, some compiler features
can be dependent on the target architecture.
This is typical for Clang, which supports multiple LLVM backends.
Even for GCC, we need to take care of biarch compiler cases.
It is not a problem when we evaluate cc-option in Makefiles because
cc-option is tested against the flag in question + $(KBUILD_CFLAGS).
The cc-option in Kconfig, on the other hand, does not accumulate
tested flags. Due to this simplification, it could potentially test
cc-option against a different target.
At first, Kconfig always evaluated cc-option against the host
architecture.
Since commit e8de12fb7c ("kbuild: Check for unknown options with
cc-option usage in Kconfig and clang"), in case of cross-compiling
with Clang, the target triple is correctly passed to Kconfig.
The case with biarch GCC (and native build with Clang) is still not
handled properly. We need to pass some flags to specify the target
machine bit.
Due to the design, all the macros in Kconfig are expanded in the
parse stage, where we do not know the target bit size yet.
For example, arch/x86/Kconfig allows a user to toggle CONFIG_64BIT.
If a compiler flag -foo depends on the machine bit, it must be tested
twice, one with -m32 and the other with -m64.
However, -m32/-m64 are not always recognized. So, this commits adds
m64-flag and m32-flag macros. They expand to -m32, -m64, respectively
if supported. Or, they expand to an empty string if unsupported.
The typical usage is like this:
config FOO
bool
default $(cc-option,$(m64-flag) -foo) if 64BIT
default $(cc-option,$(m32-flag) -foo)
This is clumsy, but there is no elegant way to handle this in the
current static macro expansion.
There was discussion for static functions vs dynamic functions.
The consensus was to go as far as possible with the static functions.
(https://lkml.org/lkml/2018/3/2/22)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: George Spelvin <lkml@sdf.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Information about GCC plugins is relevant to kernel building, so move this
document to the kbuild manual.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This makes the script more convenient to run.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_DEBUG_INFO is enabled, the two kallsyms linking steps spend
time collecting and writing the dwarf sections to the temporary output
files. kallsyms does not need this information, and leaving it off
halves their linking time. This is especially noticeable without
CONFIG_DEBUG_INFO_REDUCED. The BTF linking stage, however, does still
need those details.
Refactor the BTF and kallsyms generation stages slightly for more
regularized temporary names. Skip debug during kallsyms links.
Additionally move "info BTF" to the correct place since commit
8959e39272 ("kbuild: Parameterize kallsyms generation and correct
reporting"), which added "info LD ..." to vmlinux_link calls.
For a full debug info build with BTF, my link time goes from 1m06s to
0m54s, saving about 12 seconds, or 18%.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/202003031814.4AEA3351@keescook
Most folks only run dt_binding_check on the single schema they care about
by setting DT_SCHEMA_FILES. That means example is only checked against
that one schema which is not always sufficient.
Let's address this by splitting processed-schema.yaml into 2 files: one
that's always all schemas for the examples and one that's just the schema
in DT_SCHEMA_FILES for dtbs.
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When doing a cold build, autoksyms.h starts empty, and is updated late
in the build process to have visibility over the symbols used by in-tree
drivers. But since the symbol whitelist is known upfront, it can be used
to pre-populate autoksyms.h and maximize the amount of code that can be
compiled to its final state in a single pass, hence reducing build time.
Do this by using gen_autoksyms.sh to initialize autoksyms.h instead of
creating an empty file.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In order to prepare the ground for a build-time optimization, split
adjust_autoksyms.sh into two scripts: one that generates autoksyms.h
based on all currently available information (whitelist, and .mod
files), and the other to inspect the diff between two versions of
autoksyms.h and trigger appropriate rebuilds.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
CONFIG_TRIM_UNUSED_KSYMS currently removes all unused exported symbols
from ksymtab. This works really well when using in-tree drivers, but
cannot be used in its current form if some of them are out-of-tree.
Indeed, even if the list of symbols required by out-of-tree drivers is
known at compile time, the only solution today to guarantee these don't
get trimmed is to set CONFIG_TRIM_UNUSED_KSYMS=n. This not only wastes
space, but also makes it difficult to control the ABI usable by vendor
modules in distribution kernels such as Android. Being able to control
the kernel ABI surface is particularly useful to ship a unique Generic
Kernel Image (GKI) for all vendors, which is a first step in the
direction of getting all vendors to contribute their code upstream.
As such, attempt to improve the situation by enabling users to specify a
symbol 'whitelist' at compile time. Any symbol specified in this
whitelist will be kept exported when CONFIG_TRIM_UNUSED_KSYMS is set,
even if it has no in-tree user. The whitelist is defined as a simple
text file, listing symbols, one per line.
Acked-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Most of the Kconfig commands (except defconfig and all*config) read
the .config file as a base set of CONFIG options.
When it does not exist, the files in DEFCONFIG_LIST are searched in
this order and loaded if found.
I do not see much sense in the last two lines in DEFCONFIG_LIST.
[1] ARCH_DEFCONFIG
The entry for DEFCONFIG_LIST is guarded by 'depends on !UML'. So, the
ARCH_DEFCONFIG definition in arch/x86/um/Kconfig is meaningless.
arch/{sh,sparc,x86}/Kconfig define ARCH_DEFCONFIG depending on 32 or
64 bit variant symbols. This is a little bit strange; ARCH_DEFCONFIG
should be a fixed string because the base config file is loaded before
the symbol evaluation stage.
Using KBUILD_DEFCONFIG makes more sense because it is fixed before
Kconfig is invoked. Fortunately, arch/{sh,sparc,x86}/Makefile define it
in the same way, and it works as expected. Hence, replace ARCH_DEFCONFIG
with "arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)".
[2] arch/$(ARCH)/defconfig
This file path is no longer valid. The defconfig files are always located
in the arch configs/ directories.
$ find arch -name defconfig | sort
arch/alpha/configs/defconfig
arch/arm64/configs/defconfig
arch/csky/configs/defconfig
arch/nds32/configs/defconfig
arch/riscv/configs/defconfig
arch/s390/configs/defconfig
arch/unicore32/configs/defconfig
The path arch/*/configs/defconfig is already covered by
"arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG)". So, this file path is
not necessary.
I moved the default KBUILD_DEFCONFIG to the top Makefile. Otherwise,
the 7 architectures listed above would end up with endless loop of
syncconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
With Ubuntu 16.04 (and presumably Debian distros of the same age),
the instructions for setting up a python virtual environment should
do so with the python 3 interpreter. On these older distros, the
default python (and virtualenv command) might be python2 based.
Some of the packages that sphinx relies on are now only available
for python3. If you don't specify the python3 interpreter for
the virtualenv, you get errors when doing the pip installs for
various packages
Fix this by adding '-p python3' to the virtualenv recommendation
line.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Link: https://lore.kernel.org/r/1582594481-23221-1-git-send-email-tim.bird@sony.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
If *q is '\0', the condition (isalnum(*q) || *q == '_') is false anyway.
It is redundant to ensure non-zero *q.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is probably stale code. In old days (~ Linux 2.5.59), Kbuild made
genksyms generate include/linux/modules/*.ver files.
The currenct Kbuild does not generate *.ver files at all.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts a very old commit, which dates back to the pre-git era:
|commit 5d1cfb5b12f72145d30ba0f53c9f238144b122b8
|Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
|Date: Sat Jul 27 02:53:19 2002 -0500
|
| kbuild: Fix compiling/installing as different users
|
| "make bzImage && sudo make install" had the problem that during
| the "sudo make install" the build system would notice that the information
| in include/linux/compile.h is not accurate (it says "compiled by <user>",
| but we are root), thus causing compile.h to be updated and leading to
| some recompiles.
|
| We now only update "compile.h" if the current user is the owner of
| include/linux/autoconf.h, i.e. the user who did the "make *config". So the
| above sequence will correctly state "compiled by <user>".
|
|diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
|index 6313db96172..cd956380978 100755
|--- a/scripts/mkcompile_h
|+++ b/scripts/mkcompile_h
|@@ -3,6 +3,17 @@ ARCH=$2
| SMP=$3
| CC=$4
|
|+# If compile.h exists already and we don't own autoconf.h
|+# (i.e. we're not the same user who did make *config), don't
|+# modify compile.h
|+# So "sudo make install" won't change the "compiled by <user>"
|+# do "compiled by root"
|+
|+if [ -r $TARGET -a ! -O ../include/linux/autoconf.h ]; then
|+ echo ' (not modified)'
|+ exit 0
|+fi
|+
| if [ -r ../.version ]; then
| VERSION=`cat ../.version`
| else
The 'make bzImage && sudo make install' problem no longer happens
because commit 1648e4f805 ("x86, kbuild: make "make install" not
depend on vmlinux") fixed the root cause.
Commit 19514fc665 ("arm, kbuild: make "make install" not depend on
vmlinux") fixed the similar issue on ARM, with detailed explanation.
So, the rule is that the installation targets should never trigger
the builds of any build artifact. By following it, this check is
unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-02-28
The following pull-request contains BPF updates for your *net-next* tree.
We've added 41 non-merge commits during the last 7 day(s) which contain
a total of 49 files changed, 1383 insertions(+), 499 deletions(-).
The main changes are:
1) BPF and Real-Time nicely co-exist.
2) bpftool feature improvements.
3) retrieve bpf_sk_storage via INET_DIAG.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove initial SIDs that have never been used or are no longer used by
the kernel from its string table, which is also used to generate the
SECINITSID_* symbols referenced in code. Update the code to
gracefully handle the fact that these can now be NULL. Stop treating
it as an error if a policy defines additional initial SIDs unknown to
the kernel. Do not load unused initial SID contexts into the sidtab.
Fix the incorrect usage of the name from the ocontext in error
messages when loading initial SIDs since these are not presently
written to the kernel policy and are therefore always NULL.
After this change, it is possible to safely reclaim and reuse some of
the unused initial SIDs without compatibility issues. Specifically,
unused initial SIDs that were being assigned the same context as the
unlabeled initial SID in policies can be reclaimed and reused for
another purpose, with existing policies still treating them as having
the unlabeled context and future policies having the option of mapping
them to a more specific context. For example, this could have been
used when the infiniband labeling support was introduced to define
initial SIDs for the default pkey and endport SIDs similar to the
handling of port/netif/node SIDs rather than always using
SECINITSID_UNLABELED as the default.
The set of safely reclaimable unused initial SIDs across all known
policies is igmp_packet (13), icmp_socket (14), tcp_socket (15), kmod
(24), policy (25), and scmp_packet (26); these initial SIDs were
assigned the same context as unlabeled in all known policies including
mls. If only considering non-mls policies (i.e. assuming that mls
users always upgrade policy with their kernels), the set of safely
reclaimable unused initial SIDs further includes file_labels (6), init
(7), sysctl_modprobe (16), and sysctl_fs (18) through sysctl_dev (23).
Adding new initial SIDs beyond SECINITSID_NUM to policy unfortunately
became a fatal error in commit 24ed7fdae6 ("selinux: use separate
table for initial SID lookup") and even before that it could cause
problems on a policy reload (collision between the new initial SID and
one allocated at runtime) ever since commit 42596eafdd ("selinux:
load the initial SIDs upon every policy load") so we cannot safely
start adding new initial SIDs to policies beyond SECINITSID_NUM (27)
until such a time as all such kernels do not need to be supported and
only those that include this commit are relevant. That is not a big
deal since we haven't added a new initial SID since 2004 (v2.6.7) and
we have plenty of unused ones we can reclaim if we truly need one.
If we want to avoid the wasted storage in initial_sid_to_string[]
and/or sidtab->isids[] for the unused initial SIDs, we could introduce
an indirection between the kernel initial SID values and the policy
initial SID values and just map the policy SID values in the ocontexts
to the kernel values during policy_load_isids(). Originally I thought
we'd do this by preserving the initial SID names in the kernel policy
and creating a mapping at load time like we do for the security
classes and permissions but that would require a new kernel policy
format version and associated changes to libsepol/checkpolicy and I'm
not sure it is justified. Simpler approach is just to create a fixed
mapping table in the kernel from the existing fixed policy values to
the kernel values. Less flexible but probably sufficient.
A separate selinux userspace change was applied in
8677ce5e8f
to enable removal of most of the unused initial SID contexts from
policies, but there is no dependency between that change and this one.
That change permits removing all of the unused initial SID contexts
from policy except for the fs and sysctl SID contexts. The initial
SID declarations themselves would remain in policy to preserve the
values of subsequent ones but the contexts can be dropped. If/when
the kernel decides to reuse one of them, future policies can change
the name and start assigning a context again without breaking
compatibility.
Here is how I would envision staging changes to the initial SIDs in a
compatible manner after this commit is applied:
1. At any time after this commit is applied, the kernel could choose
to reclaim one of the safely reclaimable unused initial SIDs listed
above for a new purpose (i.e. replace its NULL entry in the
initial_sid_to_string[] table with a new name and start using the
newly generated SECINITSID_name symbol in code), and refpolicy could
at that time rename its declaration of that initial SID to reflect its
new purpose and start assigning it a context going
forward. Existing/old policies would map the reclaimed initial SID to
the unlabeled context, so that would be the initial default behavior
until policies are updated. This doesn't depend on the selinux
userspace change; it will work with existing policies and userspace.
2. In 6 months or so we'll have another SELinux userspace release that
will include the libsepol/checkpolicy support for omitting unused
initial SID contexts.
3. At any time after that release, refpolicy can make that release its
minimum build requirement and drop the sid context statements (but not
the sid declarations) for all of the unused initial SIDs except for
fs and sysctl, which must remain for compatibility on policy
reload with old kernels and for compatibility with kernels that were
still using SECINITSID_SYSCTL (< 2.6.39). This doesn't depend on this
kernel commit; it will work with previous kernels as well.
4. After N years for some value of N, refpolicy decides that it no
longer cares about policy reload compatibility for kernels that
predate this kernel commit, and refpolicy drops the fs and sysctl
SID contexts from policy too (but retains the declarations).
5. After M years for some value of M, the kernel decides that it no
longer cares about compatibility with refpolicies that predate step 4
(dropping the fs and sysctl SIDs), and those two SIDs also become
safely reclaimable. This step is optional and need not ever occur unless
we decide that the need to reclaim those two SIDs outweighs the
compatibility cost.
6. After O years for some value of O, refpolicy decides that it no
longer cares about policy load (not just reload) compatibility for
kernels that predate this kernel commit, and both kernel and refpolicy
can then start adding and using new initial SIDs beyond 27. This does
not depend on the previous change (step 5) and can occur independent
of it.
Fixes: https://github.com/SELinuxProject/selinux-kernel/issues/12
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This if_change_rule is not working properly; it cannot detect any
command line change.
The reason is because cmd-check in scripts/Kbuild.include compares
$(cmd_$@) and $(cmd_$1), but cmd_dtc_dt_yaml does not exist here.
For if_change_rule to work properly, the stem part of cmd_* and rule_*
must match. Because this cmd_and_fixdep invokes cmd_dtc, this rule must
be named rule_dtc.
Fixes: 4f0e3a57d6 ("kbuild: Add support for DT binding schema checks")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Change "/usr/bin/python3" to "/usr/bin/env python3" for
more portable solution in bpf_helpers_doc.py.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200225205426.6975-1-scott.branden@broadcom.com
This script allows sysctl documentation to be checked against the
kernel source code, to identify missing or obsolete entries. Running
it against 5.5 shows for example that sysctl/kernel.rst has two
obsolete entries and is missing 52 entries.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There are some issues at the script with regards to :doc:
tags:
- It doesn't escape files under Documentation/sphinx,
leading to false positives;
- It doesn't handle root URLs, like :doc:`/x86/boot`;
- It doesn't output the file with a bad reference.
Address those things, in order to remove false positives
from the list of problems.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Recently, I found that get_maintainer was causing me to send emails to
the old addresses for maintainers. Since I usually just trust the
output of get_maintainer to know the right email address, I didn't even
look carefully and fired off two patch series that went to the wrong
place. Oops.
The problem was introduced recently when trying to add signatures from
Fixes. The problem was that these email addresses were added too early
in the process of compiling our list of places to send. Things added to
the list earlier are considered more canonical and when we later added
maintainer entries we ended up deduplicating to the old address.
Here are two examples using mainline commits (to make it easier to
replicate) for the two maintainers that I messed up recently:
$ git format-patch d8549bcd0529~..d8549bcd0529
$ ./scripts/get_maintainer.pl 0001-clk-Add-clk_hw*.patch | grep Boyd
Stephen Boyd <sboyd@codeaurora.org>...
$ git format-patch 6d1238aa3395~..6d1238aa3395
$ ./scripts/get_maintainer.pl 0001-arm64-dts-qcom-qcs404*.patch | grep Andy
Andy Gross <andy.gross@linaro.org>
Let's move the adding of addresses from Fixes: to the end since the
email addresses from these are much more likely to be older.
After this patch the above examples get the right addresses for the two
examples.
Link: http://lkml.kernel.org/r/20200127095001.1.I41fba9f33590bfd92cd01960161d8384268c6569@changeid
Fixes: 2f5bd34369 ("scripts/get_maintainer.pl: add signatures from Fixes: <badcommit> lines in commit message")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 1ca84ed642 ("MAINTAINERS: Reclaim the P: tag for Maintainer
Entry Profile") changed the use of the "P:" tag from "Person" to
"Profile (ie: special subsystem coding styles and characteristics)"
Change how get_maintainer.pl parses the "P:" tag to match.
Link: http://lkml.kernel.org/r/ca53823fc5d25c0be32ad937d0207a0589c08643.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Dan Williams <dan.j.william@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Query ld cache for versions of both libc and libcpp run-time, instead
of querying /proc/self/maps for libc run-time, and ld cache for libcpp
run-time, thus reducing code size and complexity.
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Link: https://lore.kernel.org/r/20200209140057.20181-1-alexander.kapshuk@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 56d5893615 ("kbuild: do not create orphan built-in.a or
obj-y objects"), scripts/link-vmlinux.sh does nothing when descending
into init/.
Once the version number becomes out of sync between .version and
include/generated/compile.h, it is not self-healing.
[How to reproduce]
$ echo 100 > .version
$ make
You will see the number in the .version is always bigger than that in
compile.h by one. After this, every time you run 'make', the vmlinux is
re-linked even when none of source files is updated.
Fixes: 56d5893615 ("kbuild: do not create orphan built-in.a or obj-y objects")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
memcpy() writes one more byte than allocated.
Fixes: 8d60526999 ("scripts/kallsyms: change table to store (strcut sym_entry *)")
Reported-by: youling257 <youling257@gmail.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are
more natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
-----BEGIN PGP SIGNATURE-----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=sv4U
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are more
natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: make multiple directory targets work
kconfig: Invalidate all symbols after changing to y or m.
kallsyms: fix type of kallsyms_token_table[]
scripts/kallsyms: change table to store (strcut sym_entry *)
scripts/kallsyms: rename local variables in read_symbol()
kbuild: rename hostprogs-y/always to hostprogs/always-y
kbuild: fix the document to use extra-y for vmlinux.lds
kconfig: fix broken dependency in randconfig-generated .config
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl49mtYPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y/5sH+wX3mdrcC7pX2XALDvl35P+QB5CFy0v1bkMY
KAi/Ulxd6aicnowsBx6wdqSZO01Bh0E/nc9x42WIbHBR9/J5ZlitpKj5pGi0JYE/
vguMEFgAPQb1dx3EGJ56dxKqJ/+zICVLhf7pawP82QqE6z4Kuonp9AXR1UMRvWej
/b1qobQB++skh+nfGYqt7c7D6MQjaSb+5+TkU6xbHfoeMHDJkNdBHiiM5IbVE/s2
KgAngM7cTYeu4el4h6ue1ZJjbU2iOi1FJU95r2ufMYEt6EEfP2zkzCYXju/xyIbO
2NsdY3xUHhr9H32xkopPMoYrnzuzoTv8xi1xkhsnbOPZzZQMPls=
=zx2k
-----END PGP SIGNATURE-----
Merge tag 'docs-5.6-2' of git://git.lwn.net/linux
Pull Documentation fixes from Jonathan Corbet:
"A handful of small documentation fixes that wandered in"
* tag 'docs-5.6-2' of git://git.lwn.net/linux:
Allow git builds of Sphinx
Documentation: changes.rst: update several outdated project URLs
Documentation: build warnings related to missing blank lines after explicit markups has been fixed
mailmap: add entry for Tiezhu Yang
Documentation/ko_KR/howto: Update a broken link
Documentation/ko_KR/howto: Update broken web addresses
docs/locking: Fix outdated section names
When using a non-release version of Sphinx, from a local build (with
improvements for kernel doc handling, why not),
sphinx-build --version
reports versions of the form
sphinx-build 3.0.0+/4703d9119972
i.e. base version, a plus symbol, slash, and the start of the git hash
of whatever repository the command is run in (no, not the hash that
was used to build Sphinx!).
This patch fixes the installation check in sphinx-pre-install to
recognise such version output.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200124183316.1719218-1-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Since commit 89b9060987 ("kconfig: Add yes2modconfig and
mod2yesconfig targets.") forgot to clear SYMBOL_VALID bit after
changing to y or m, these targets did not save the changes.
Call sym_clear_all_valid() so that all symbols are revalidated.
Fixes: 89b9060987 ("kconfig: Add yes2modconfig and mod2yesconfig targets.")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since 5.5-rc1 the last user of this function is gone, so remove the
functionality.
See commit
2ad9d7747c ("netfilter: conntrack: free extension area immediately")
for details.
Link: http://lkml.kernel.org/r/20191212223442.22141-1-fw@strlen.de
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The symbol table is extended every 10000 addition by using realloc(),
where data copy might occur to the new buffer.
To decrease the amount of possible data copy, let's change the table
to store the pointer.
The symbol type + symbol name part is appended at the end of
(struct sym_entry), and allocated together with the struct body.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I will use 'sym' for the point to struce sym_entry in the next commit.
Rename 'sym', 'stype' to 'name', 'type', which are more intuitive.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Running randconfig on arm64 using KCONFIG_SEED=0x40C5E904 (e.g. on v5.5)
produces the .config with CONFIG_EFI=y and CONFIG_CPU_BIG_ENDIAN=y,
which does not meet the !CONFIG_CPU_BIG_ENDIAN dependency.
This is because the user choice for CONFIG_CPU_LITTLE_ENDIAN vs
CONFIG_CPU_BIG_ENDIAN is set by randomize_choice_values() after the
value of CONFIG_EFI is calculated.
When this happens, the has_changed flag should be set.
Currently, it takes the result from the last iteration. It should
accumulate all the results of the loop.
Fixes: 3b9a19e089 ("kconfig: loop as long as we changed some symbols in randconfig")
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- add 'yes2modconfig' and 'mod2yesconfig' targets
- sanitize help text
- various code cleanups
-----BEGIN PGP SIGNATURE-----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=FgLk
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- add 'yes2modconfig' and 'mod2yesconfig' targets (useful mainly for
turning syzbot configs into more modular ones as a step to minimizing
the result)
- sanitize help text
- various code cleanups
* tag 'kconfig-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix documentation typos
kconfig: fix an "implicit declaration of function" warning
kconfig: fix nesting of symbol help text
kconfig: distinguish between dependencies and visibility in help text
kconfig: list all definitions of a symbol in help text
kconfig: Add yes2modconfig and mod2yesconfig targets.
kconfig: use $(PERL) in Makefile
kconfig: fix too deep indentation in Makefile
kconfig: localmodconfig: fix indentation for closing brace
kconfig: localmodconfig: remove unused $config
kconfig: squash prop_alloc() into menu_add_prop()
kconfig: remove sym from struct property
kconfig: remove 'prompt' argument from menu_add_prop()
kconfig: move prompt handling to menu_add_prompt() from menu_add_prop()
kconfig: remove 'prompt' symbol
kconfig: drop T_WORD from the RHS of 'prompt' symbol
kconfig: use parent->dep as the parentdep of 'menu'
kconfig: remove the rootmenu check in menu_add_prop()
- detect missing include guard in UAPI headers
- do not create orphan built-in.a or obj-y objects
- generate modules.builtin more simply, and drop tristate.conf
- simplify built-in initramfs creation
- make linux-headers deb package thinner
- optimize the deb package build script
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=i/xZ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- detect missing include guard in UAPI headers
- do not create orphan built-in.a or obj-y objects
- generate modules.builtin more simply, and drop tristate.conf
- simplify built-in initramfs creation
- make linux-headers deb package thinner
- optimize the deb package build script
- misc cleanups
* tag 'kbuild-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
builddeb: split libc headers deployment out into a function
builddeb: split kernel headers deployment out into a function
builddeb: remove redundant make for ARCH=um
builddeb: avoid invoking sub-shells where possible
builddeb: remove redundant $objtree/
builddeb: match temporary directory name to the package name
builddeb: remove unneeded files in hdrobjfiles for headers package
kbuild: use -S instead of -E for precise cc-option test in Kconfig
builddeb: allow selection of .deb compressor
kbuild: remove 'Building modules, stage 2.' log
kbuild: remove *.tmp file when filechk fails
kbuild: remove PYTHON2 variable
modpost: assume STT_SPARC_REGISTER is defined
gen_initramfs.sh: remove intermediate cpio_list on errors
initramfs: refactor the initramfs build rules
gen_initramfs.sh: always output cpio even without -o option
initramfs: add default_cpio_list, and delete -d option support
initramfs: generate dependency list and cpio at the same time
initramfs: specify $(src)/gen_initramfs.sh as a prerequisite in Makefile
initramfs: make initramfs compression choice non-optional
...
Pull updates from Andrew Morton:
"Most of -mm and quite a number of other subsystems: hotfixes, scripts,
ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov.
MM is fairly quiet this time. Holidays, I assume"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
kcov: ignore fault-inject and stacktrace
include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc()
execve: warn if process starts with executable stack
reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()
init/main.c: fix misleading "This architecture does not have kernel memory protection" message
init/main.c: fix quoted value handling in unknown_bootoption
init/main.c: remove unnecessary repair_env_string in do_initcall_level
init/main.c: log arguments and environment passed to init
fs/binfmt_elf.c: coredump: allow process with empty address space to coredump
fs/binfmt_elf.c: coredump: delete duplicated overflow check
fs/binfmt_elf.c: coredump: allocate core ELF header on stack
fs/binfmt_elf.c: make BAD_ADDR() unlikely
fs/binfmt_elf.c: better codegen around current->mm
fs/binfmt_elf.c: don't copy ELF header around
fs/binfmt_elf.c: fix ->start_code calculation
fs/binfmt_elf.c: smaller code generation around auxv vector fill
lib/find_bit.c: uninline helper _find_next_bit()
lib/find_bit.c: join _find_next_bit{_le}
uapi: rename ext2_swab() to swab() and share globally in swab.h
lib/scatterlist.c: adjust indentation in __sg_alloc_table
...
Here are some of the common spelling mistakes and typos that I've found
while fixing up spelling mistakes in the kernel. Most of them still
exist in more than two source files.
Link: http://lkml.kernel.org/r/20191229143626.51238-1-xndchn@gmail.com
Signed-off-by: Xiong <xndchn@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
couple of things of note:
- Conversion of the NFS documentation to RST
- A new document on how to help with documentation (and a maintainer
profile entry too)
Plus the usual collection of typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl4wnWwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YFPIH/069z5bJMrT3QRzENu8A9Elz76IXoy7pJOmJ
53Ml5+c4sYpvV3o6d9n5TSvdy1pH0Shw73FbJzUIMj0ZCcHysWVO1eBDlcj8soJQ
UonCXbKc+30AJBoKZqAC3jjFw0/fXwD1x+GzQo+l0LMQDOc0i0Luv8/riR5c9hEO
5TOXB2GyhHnbSFxzcN9afmBsuNz1cPa/fg5q6zL+5Q/fUUOJ6IcYwq165P2EwZdm
KRah299VU/XhrYlHJX7OZX3ck9+PaYURSpv4KH81J4jhmoBWAw5jPt77Qw8aN3w9
LcNip+qgpx9wC7OgBiqdJkKcvsNy76pfDhUOj+XarGisA8031d0=
=9m/7
-----END PGP SIGNATURE-----
Merge tag 'docs-5.6' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively quiet cycle for documentation, but there's
still a couple of things of note:
- Conversion of the NFS documentation to RST
- A new document on how to help with documentation (and a maintainer
profile entry too)
Plus the usual collection of typo fixes, etc"
* tag 'docs-5.6' of git://git.lwn.net/linux: (40 commits)
docs: filesystems: add overlayfs to index.rst
docs: usb: remove some broken references
scripts/find-unused-docs: Fix massive false positives
docs: nvdimm: use ReST notation for subsection
zram: correct documentation about sysfs node of huge page writeback
Documentation: zram: various fixes in zram.rst
Add a maintainer entry profile for documentation
Add a document on how to contribute to the documentation
docs: Keep up with the location of NoUri
Documentation: Call out example SYM_FUNC_* usage as x86-specific
Documentation: nfs: fault_injection: convert to ReST
Documentation: nfs: pnfs-scsi-server: convert to ReST
Documentation: nfs: convert pnfs-block-server to ReST
Documentation: nfs: idmapper: convert to ReST
Documentation: convert nfsd-admin-interfaces to ReST
Documentation: nfs-rdma: convert to ReST
Documentation: nfsroot.rst: COSMETIC: refill a paragraph
Documentation: nfsroot.txt: convert to ReST
Documentation: convert nfs.txt to ReST
Documentation: filesystems: convert vfat.txt to RST
...
Here are the big set of tty and serial driver updates for 5.6-rc1
Included in here are:
- dummy_con cleanups (touches lots of arch code)
- sysrq logic cleanups (touches lots of serial drivers)
- samsung driver fixes (wasn't really being built)
- conmakeshash move to tty subdir out of scripts
- lots of small tty/serial driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFRBg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn2VACgkge7vTeUNeZFc+6F4NWphAQ5tCQAoK/MMbU6
0O8ef7PjFwCU4s227UTv
=6m40
-----END PGP SIGNATURE-----
Merge tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here are the big set of tty and serial driver updates for 5.6-rc1
Included in here are:
- dummy_con cleanups (touches lots of arch code)
- sysrq logic cleanups (touches lots of serial drivers)
- samsung driver fixes (wasn't really being built)
- conmakeshash move to tty subdir out of scripts
- lots of small tty/serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
tty: n_hdlc: Use flexible-array member and struct_size() helper
tty: baudrate: SPARC supports few more baud rates
tty: baudrate: Synchronise baud_table[] and baud_bits[]
tty: serial: meson_uart: Add support for kernel debugger
serial: imx: fix a race condition in receive path
serial: 8250_bcm2835aux: Document struct bcm2835aux_data
serial: 8250_bcm2835aux: Use generic remapping code
serial: 8250_bcm2835aux: Allocate uart_8250_port on stack
serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Fix line mismatch on driver unbind
serial_core: Remove unused member in uart_port
vt: Correct comment documenting do_take_over_console()
vt: Delete comment referencing non-existent unbind_con_driver()
arch/xtensa/setup: Drop dummy_con initialization
arch/x86/setup: Drop dummy_con initialization
arch/unicore32/setup: Drop dummy_con initialization
arch/sparc/setup: Drop dummy_con initialization
arch/sh/setup: Drop dummy_con initialization
arch/s390/setup: Drop dummy_con initialization
...
Pull networking updates from David Miller:
1) Add WireGuard
2) Add HE and TWT support to ath11k driver, from John Crispin.
3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.
4) Add variable window congestion control to TIPC, from Jon Maloy.
5) Add BCM84881 PHY driver, from Russell King.
6) Start adding netlink support for ethtool operations, from Michal
Kubecek.
7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.
8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.
9) Add BPF dynamic program extensions, from Alexei Starovoitov.
10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.
11) Add support for macsec HW offloading, from Antoine Tenart.
12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.
13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...
The commands surrounded by ( ... ) is run in a sub-shell, but you do
not have to spawn a sub-shell for every single line.
Use just one ( ... ) for creating debian/hdrsrcfiles.
For tar, use -C option instead.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This script works only when it is invoked in the $objtree, that is,
it is already relying on $objtree is '.'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The temporary directory names, debian/hdrtmp (linux-headers package)
vs debian/headertmp (linux-libc-dev package), are confusing.
Matching the directory name to the package name is clearer, IMHO.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- We do not need tools/objtool/fixdep or tools/objtool/sync-check.sh
for building external modules. Including tools/objtool/objtool is
enough.
- gcc-common.h is a check-in file. I do not see any point to search
for it in objtree.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull objtool updates from Ingo Molnar:
"The main changes are to move the ORC unwind table sorting from early
init to build-time - this speeds up booting.
No change in functionality intended"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix !CONFIG_MODULES build warning
x86/unwind/orc: Remove boot-time ORC unwind tables sorting
scripts/sorttable: Implement build-time ORC unwind table sorting
scripts/sorttable: Rename 'sortextable' to 'sorttable'
scripts/sortextable: Refactor the do_func() function
scripts/sortextable: Remove dead code
scripts/sortextable: Clean up the code to meet the kernel coding style better
scripts/sortextable: Rewrite error/success handling
This reverts upstream commit 18d7b2f4ee45fec422b7d82bab0b3c762ee907e4. A
revert in upstream dtc is pending.
This commit didn't work for properties such as 'interrupt-map' that have
phandle in the middle of an entry. It would also not work for a 0 or -1
phandle value that acts as a NULL.
Signed-off-by: Rob Herring <robh@kernel.org>
scripts/find-unused-docs.sh invokes scripts/kernel-doc to find out if a
source file contains kerneldoc or not.
However, as it passes the no longer supported "-text" option to
scripts/kernel-doc, the latter prints out its help text, causing all
files to be considered containing kerneldoc.
Get rid of these false positives by removing the no longer supported
"-text" option from the scripts/kernel-doc invocation.
Cc: stable@vger.kernel.org # 4.16+
Fixes: b051426753 ("scripts: kernel-doc: get rid of unused output formats")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200127093107.26401-1-geert+renesas@glider.be
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- remove ioremap_nocache given that is is equivalent to
ioremap everywhere
-----BEGIN PGP SIGNATURE-----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=TUCJ
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap
Pull ioremap updates from Christoph Hellwig:
"Remove the ioremap_nocache API (plus wrappers) that are always
identical to ioremap"
* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
remove ioremap_nocache and devm_ioremap_nocache
MIPS: define ioremap_nocache to ioremap
- New architecture features
* Support for Armv8.5 E0PD, which benefits KASLR in the same way as
KPTI but without the overhead. This allows KPTI to be disabled on
CPUs that are not affected by Meltdown, even is KASLR is enabled.
* Initial support for the Armv8.5 RNG instructions, which claim to
provide access to a high bandwidth, cryptographically secure hardware
random number generator. As well as exposing these to userspace, we
also use them as part of the KASLR seed and to seed the crng once
all CPUs have come online.
* Advertise a bunch of new instructions to userspace, including support
for Data Gathering Hint, Matrix Multiply and 16-bit floating point.
- Kexec
* Cleanups in preparation for relocating with the MMU enabled
* Support for loading crash dump kernels with kexec_file_load()
- Perf and PMU drivers
* Cleanups and non-critical fixes for a couple of system PMU drivers
- FPU-less (aka broken) CPU support
* Considerable fixes to support CPUs without the FP/SIMD extensions,
including their presence in heterogeneous systems. Good luck finding
a 64-bit userspace that handles this.
- Modern assembly function annotations
* Start migrating our use of ENTRY() and ENDPROC() over to the
new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended to
aid debuggers
- Kbuild
* Cleanup detection of LSE support in the assembler by introducing
'as-instr'
* Remove compressed Image files when building clean targets
- IP checksumming
* Implement optimised IPv4 checksumming routine when hardware offload
is not in use. An IPv6 version is in the works, pending testing.
- Hardware errata
* Work around Cortex-A55 erratum #1530923
- Shadow call stack
* Work around some issues with Clang's integrated assembler not liking
our perfectly reasonable assembly code
* Avoid allocating the X18 register, so that it can be used to hold the
shadow call stack pointer in future
- ACPI
* Fix ID count checking in IORT code. This may regress broken firmware
that happened to work with the old implementation, in which case we'll
have to revert it and try something else
* Fix DAIF corruption on return from GHES handler with pseudo-NMIs
- Miscellaneous
* Whitelist some CPUs that are unaffected by Spectre-v2
* Reduce frequency of ASID rollover when KPTI is compiled in but
inactive
* Reserve a couple of arch-specific PROT flags that are already used by
Sparc and PowerPC and are planned for later use with BTI on arm64
* Preparatory cleanup of our entry assembly code in preparation for
moving more of it into C later on
* Refactoring and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl4oY+IQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNNfRB/4p3vax0hqaOnLRvmJPRXF31B8oPlivnr2u
6HCA9LkdU5IlrgaTNOJ/sQEqJAPOPCU7v49Ol0iYw0iKL1suUE7Ikui5VB6Uybqt
YbfF5UNzfXAMs2A86TF/hzqhxw+W+lpnZX8NVTuQeAODfHEGUB1HhTLfRi9INsER
wKEAuoZyuSUibxTFvji+DAq7nVRniXX7CM7tE385pxDisCMuu/7E5wOl+3EZYXWz
DTGzTbHXuVFL+UFCANFEUlAtmr3dQvPFIqAwVl/CxjRJjJ7a+/G3cYLsHFPrQCjj
qYX4kfhAeeBtqmHL7YFNWFwFs5WaT5UcQquFO665/+uCTWSJpORY
=AIh/
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The changes are a real mixed bag this time around.
The only scary looking one from the diffstat is the uapi change to
asm-generic/mman-common.h, but this has been acked by Arnd and is
actually just adding a pair of comments in an attempt to prevent
allocation of some PROT values which tend to get used for
arch-specific purposes. We'll be using them for Branch Target
Identification (a CFI-like hardening feature), which is currently
under review on the mailing list.
New architecture features:
- Support for Armv8.5 E0PD, which benefits KASLR in the same way as
KPTI but without the overhead. This allows KPTI to be disabled on
CPUs that are not affected by Meltdown, even is KASLR is enabled.
- Initial support for the Armv8.5 RNG instructions, which claim to
provide access to a high bandwidth, cryptographically secure
hardware random number generator. As well as exposing these to
userspace, we also use them as part of the KASLR seed and to seed
the crng once all CPUs have come online.
- Advertise a bunch of new instructions to userspace, including
support for Data Gathering Hint, Matrix Multiply and 16-bit
floating point.
Kexec:
- Cleanups in preparation for relocating with the MMU enabled
- Support for loading crash dump kernels with kexec_file_load()
Perf and PMU drivers:
- Cleanups and non-critical fixes for a couple of system PMU drivers
FPU-less (aka broken) CPU support:
- Considerable fixes to support CPUs without the FP/SIMD extensions,
including their presence in heterogeneous systems. Good luck
finding a 64-bit userspace that handles this.
Modern assembly function annotations:
- Start migrating our use of ENTRY() and ENDPROC() over to the
new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended
to aid debuggers
Kbuild:
- Cleanup detection of LSE support in the assembler by introducing
'as-instr'
- Remove compressed Image files when building clean targets
IP checksumming:
- Implement optimised IPv4 checksumming routine when hardware offload
is not in use. An IPv6 version is in the works, pending testing.
Hardware errata:
- Work around Cortex-A55 erratum #1530923
Shadow call stack:
- Work around some issues with Clang's integrated assembler not
liking our perfectly reasonable assembly code
- Avoid allocating the X18 register, so that it can be used to hold
the shadow call stack pointer in future
ACPI:
- Fix ID count checking in IORT code. This may regress broken
firmware that happened to work with the old implementation, in
which case we'll have to revert it and try something else
- Fix DAIF corruption on return from GHES handler with pseudo-NMIs
Miscellaneous:
- Whitelist some CPUs that are unaffected by Spectre-v2
- Reduce frequency of ASID rollover when KPTI is compiled in but
inactive
- Reserve a couple of arch-specific PROT flags that are already used
by Sparc and PowerPC and are planned for later use with BTI on
arm64
- Preparatory cleanup of our entry assembly code in preparation for
moving more of it into C later on
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (73 commits)
arm64: acpi: fix DAIF manipulation with pNMI
arm64: kconfig: Fix alignment of E0PD help text
arm64: Use v8.5-RNG entropy for KASLR seed
arm64: Implement archrandom.h for ARMv8.5-RNG
arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'
arm64: entry: Avoid empty alternatives entries
arm64: Kconfig: select HAVE_FUTEX_CMPXCHG
arm64: csum: Fix pathological zero-length calls
arm64: entry: cleanup sp_el0 manipulation
arm64: entry: cleanup el0 svc handler naming
arm64: entry: mark all entry code as notrace
arm64: assembler: remove smp_dmb macro
arm64: assembler: remove inherit_daif macro
ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()
mm: Reserve asm-generic prot flags 0x10 and 0x20 for arch use
arm64: Use macros instead of hard-coded constants for MAIR_EL1
arm64: Add KRYO{3,4}XX CPU cores to spectre-v2 safe list
arm64: kernel: avoid x18 in __cpu_soft_restart
arm64: kvm: stop treating register x18 as caller save
arm64/lib: copy_page: avoid x18 register in assembler code
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-01-22
The following pull-request contains BPF updates for your *net-next* tree.
We've added 92 non-merge commits during the last 16 day(s) which contain
a total of 320 files changed, 7532 insertions(+), 1448 deletions(-).
The main changes are:
1) function by function verification and program extensions from Alexei.
2) massive cleanup of selftests/bpf from Toke and Andrii.
3) batched bpf map operations from Brian and Yonghong.
4) tcp congestion control in bpf from Martin.
5) bulking for non-map xdp_redirect form Toke.
6) bpf_send_signal_thread helper from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When trying to compile with CONFIG_DEBUG_INFO_BTF enabled, I got this
error:
% make -s
Failed to generate BTF for vmlinux
Try to disable CONFIG_DEBUG_INFO_BTF
make[3]: *** [vmlinux] Error 1
Compiling again without -s shows the true error (that pahole is
missing), but since this is fatal, we should show the error
unconditionally on stderr as well, not silence it using the `info`
function. With this patch:
% make -s
BTF: .tmp_vmlinux.btf: pahole (pahole) is not available
Failed to generate BTF for vmlinux
Try to disable CONFIG_DEBUG_INFO_BTF
make[3]: *** [vmlinux] Error 1
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200122000110.GA310073@chrisdown.name
Currently, -E (stop after the preprocessing stage) is used to check
whether the given compiler flag is supported.
While it is faster than -S (or -c), it can be false-positive. You need
to run the compilation proper to check the flag more precisely.
For example, -E and -S disagree about the support of
"--param asan-instrument-allocas=1".
$ gcc -Werror --param asan-instrument-allocas=1 -E -x c /dev/null -o /dev/null
$ echo $?
0
$ gcc -Werror --param asan-instrument-allocas=1 -S -x c /dev/null -o /dev/null
cc1: error: invalid --param name ‘asan-instrument-allocas’; did you mean ‘asan-instrument-writes’?
$ echo $?
1
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Select deb compression using KDEB_COMPRESS make variable. This allows to
use gzip compression for local or test builds, and that's way faster
than now-default xz compression.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Scenario 1, ARMv7
=================
If code in arch/arm/kernel/ftrace.c would operate on mcount() pointer
the following may be generated:
00000230 <prealloc_fixed_plts>:
230: b5f8 push {r3, r4, r5, r6, r7, lr}
232: b500 push {lr}
234: f7ff fffe bl 0 <__gnu_mcount_nc>
234: R_ARM_THM_CALL __gnu_mcount_nc
238: f240 0600 movw r6, #0
238: R_ARM_THM_MOVW_ABS_NC __gnu_mcount_nc
23c: f8d0 1180 ldr.w r1, [r0, #384] ; 0x180
FTRACE currently is not able to deal with it:
WARNING: CPU: 0 PID: 0 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1ad/0x230()
...
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.116-... #1
...
[<c0314e3d>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c051a7f1>] (dump_stack+0x81/0xa8)
[<c051a7f1>] (dump_stack) from [<c0321c5d>] (warn_slowpath_common+0x69/0x90)
[<c0321c5d>] (warn_slowpath_common) from [<c0321cf3>] (warn_slowpath_null+0x17/0x1c)
[<c0321cf3>] (warn_slowpath_null) from [<c038ee9d>] (ftrace_bug+0x1ad/0x230)
[<c038ee9d>] (ftrace_bug) from [<c038f1f9>] (ftrace_process_locs+0x27d/0x444)
[<c038f1f9>] (ftrace_process_locs) from [<c08915bd>] (ftrace_init+0x91/0xe8)
[<c08915bd>] (ftrace_init) from [<c0885a67>] (start_kernel+0x34b/0x358)
[<c0885a67>] (start_kernel) from [<00308095>] (0x308095)
---[ end trace cb88537fdc8fa200 ]---
ftrace failed to modify [<c031266c>] prealloc_fixed_plts+0x8/0x60
actual: 44:f2:e1:36
ftrace record flags: 0
(0) expected tramp: c03143e9
Scenario 2, ARMv4T
==================
ftrace: allocating 14435 entries in 43 pages
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2029 ftrace_bug+0x204/0x310
CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.5 #1
Hardware name: Cirrus Logic EDB9302 Evaluation Board
[<c0010a24>] (unwind_backtrace) from [<c000ecb0>] (show_stack+0x20/0x2c)
[<c000ecb0>] (show_stack) from [<c03c72e8>] (dump_stack+0x20/0x30)
[<c03c72e8>] (dump_stack) from [<c0021c18>] (__warn+0xdc/0x104)
[<c0021c18>] (__warn) from [<c0021d7c>] (warn_slowpath_null+0x4c/0x5c)
[<c0021d7c>] (warn_slowpath_null) from [<c0095360>] (ftrace_bug+0x204/0x310)
[<c0095360>] (ftrace_bug) from [<c04dabac>] (ftrace_init+0x3b4/0x4d4)
[<c04dabac>] (ftrace_init) from [<c04cef4c>] (start_kernel+0x20c/0x410)
[<c04cef4c>] (start_kernel) from [<00000000>] ( (null))
---[ end trace 0506a2f5dae6b341 ]---
ftrace failed to modify
[<c000c350>] perf_trace_sys_exit+0x5c/0xe8
actual: 1e:ff:2f:e1
Initializing ftrace call sites
ftrace record flags: 0
(0)
expected tramp: c000fb24
The analysis for this problem has been already performed previously,
refer to the link below.
Fix the above problems by allowing only selected reloc types in
__mcount_loc. The list itself comes from the legacy recordmcount.pl
script.
Link: https://lore.kernel.org/lkml/56961010.6000806@pengutronix.de/
Cc: stable@vger.kernel.org
Fixes: ed60453fa8 ("ARM: 6511/1: ftrace: add ARM support for C version of recordmcount")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Bartosz Golaszewski reports that when "make {menu,n,g,x}config" fails
due to missing packages, a temporary file is left over, which is not
ignored by git.
For example, if GTK+ is not installed:
$ make gconfig
*
* Unable to find the GTK+ installation. Please make sure that
* the GTK+ 2.0 development package is correctly installed.
* You need gtk+-2.0 gmodule-2.0 libglade-2.0
*
scripts/kconfig/Makefile:208: recipe for target 'scripts/kconfig/gconf-cfg' failed
make[1]: *** [scripts/kconfig/gconf-cfg] Error 1
Makefile:567: recipe for target 'gconfig' failed
make: *** [gconfig] Error 2
$ git status
HEAD detached at v5.4
Untracked files:
(use "git add <file>..." to include in what will be committed)
scripts/kconfig/gconf-cfg.tmp
nothing added to commit but untracked files present (use "git add" to track)
This is because the check scripts are run with filechk, which misses
to clean up the temporary file on failure.
When the line
{ $(filechk_$(1)); } > $@.tmp;
... fails, it exits immediately due to the 'set -e'. Use trap to make
sure to delete the temporary file on exit.
For extra safety, I replaced $@.tmp with $(dot-target).tmp to make it
a hidden file.
Reported-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 8d5290149e ("[SPARC]: Deal with glibc changing macro names in
modpost.c") was more than 14 years ago. STT_SPARC_REGISTER is hopefully
defined in elf.h of recent C libraries.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Similar to 'cc-option' or 'ld-option', it is occasionally necessary to
check whether the assembler supports certain ISA extensions. In the
arm64 code we currently do this in Makefile with an additional define:
lseinstr := $(call as-instr,.arch_extension lse,-DCONFIG_AS_LSE=1)
Add the 'as-instr' option so that it can be used in Kconfig directly:
def_bool $(as-instr,.arch_extension lse)
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
bpf_helpers_doc.py script, used to generate bpf_helper_defs.h, unconditionally
emits one informational message to stderr. Remove it and preserve stderr to
contain only relevant errors. Also make sure script invocations command is
muted by default in libbpf's Makefile.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200113073143.1779940-3-andriin@fb.com
Remove a bunch of files not used during external module builds:
- foreign architecture headers
- subtree Makefiles
- Kconfig files
- perl scripts
On amd64 system this looses a third of the resulting .deb size.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
strncasecmp() & strcasecmp() functions are declared in strings.h, not
string.h. On most environments the former is implicitly included by
the latter but on some setups, building menuconfig results in the
following warning:
HOSTCC scripts/kconfig/mconf.o
scripts/kconfig/mconf.c: In function ‘search_conf’:
scripts/kconfig/mconf.c:423:6: warning: implicit declaration of function ‘strncasecmp’ [-Wimplicit-function-declaration]
if (strncasecmp(dialog_input_result, CONFIG_, strlen(CONFIG_)) == 0)
^~~~~~~~~~~
scripts/kconfig/mconf.c: In function ‘main’:
scripts/kconfig/mconf.c:1021:8: warning: implicit declaration of function ‘strcasecmp’ [-Wimplicit-function-declaration]
if (!strcasecmp(mode, "single_menu"))
^~~~~~~~~~
Fix it by explicitly including strings.h.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use __always_inline for atomic fallback wrappers. When building for size
(CC_OPTIMIZE_FOR_SIZE), some compilers appear to be less inclined to
inline even relatively small static inline functions that are assumed to
be inlinable such as atomic ops. This can cause problems, for example in
UACCESS regions.
While the fallback wrappers aren't pure wrappers, they are trivial
nonetheless, and the function they wrap should determine the final
inlining policy.
For x86 tinyconfig we observe:
- vmlinux baseline: 1315988
- vmlinux with patch: 1315928 (-60 bytes)
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Prefer __always_inline for atomic wrappers. When building for size
(CC_OPTIMIZE_FOR_SIZE), some compilers appear to be less inclined to
inline even relatively small static inline functions that are assumed to
be inlinable such as atomic ops. This can cause problems, for example in
UACCESS regions.
By using __always_inline, we let the real implementation and not the
wrapper determine the final inlining preference.
For x86 tinyconfig we observe:
- vmlinux baseline: 1316204
- vmlinux with patch: 1315988 (-216 bytes)
This came up when addressing UACCESS warnings with CC_OPTIMIZE_FOR_SIZE
in the KCSAN runtime:
http://lkml.kernel.org/r/58708908-84a0-0a81-a836-ad97e33dbb62@infradead.org
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When we generate the help text of a symbol (e.g. when a user presses '?'
in menuconfig), we do two things:
1. We iterate through every prompt that belongs to that symbol,
printing its text and its location in the menu tree.
2. We print symbol-wide information that's not linked to a particular
prompt, such as what it selects/is selected by and what it
implies/is implied by.
Each prompt we print for 1 starts with a line that's not indented
indicating where the prompt is defined, then continues with indented
lines that describe properties of that particular definition.
Once we get to 2, however, we print all the global data indented as
well! Visually, this makes it look like the symbol-wide data is
associated with the last prompt we happened to print rather than
the symbol as a whole.
Fix this by removing the indentation for symbol-wide information.
Before:
Symbol: CPU_FREQ [=n]
Type : bool
Defined at drivers/cpufreq/Kconfig:4
Prompt: CPU Frequency scaling
Location:
-> CPU Power Management
-> CPU Frequency scaling
Selects: SRCU [=n]
Selected by [n]:
- ARCH_SA1100 [=n] && <choice>
After:
Symbol: CPU_FREQ [=n]
Type : bool
Defined at drivers/cpufreq/Kconfig:4
Prompt: CPU Frequency scaling
Location:
-> CPU Power Management
-> CPU Frequency scaling
Selects: SRCU [=n]
Selected by [n]:
- ARCH_SA1100 [=n] && <choice>
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Kconfig makes a distinction between dependencies (defined by "depends
on" expressions and enclosing "if" blocks) and visibility (which
includes all dependencies, but also includes inline "if" expressions of
individual properties as well as, for prompts, "visible if" expressions
of enclosing menus).
Before commit bcdedcc1af ("menuconfig: print more info for symbol
without prompts"), the "Depends on" lines of a symbol's help text
indicated the visibility of the prompt property they appeared under.
After bcdedcc1af, there was always only a single "Depends on" line,
which indicated the visibility of the first P_SYMBOL property of the
symbol. Since P_SYMBOLs never have inline if expressions, this was in
effect the same as the dependencies of the menu item that the P_SYMBOL
was attached to.
Neither of these situations accurately conveyed the dependencies of a
symbol--the first because it was actually the visibility, and the second
because it only showed the dependencies from a single definition.
With this series, we are back to printing separate dependencies for each
definition, but we print the actual dependencies (rather than the
visibility) in the "Depends on" line. However, it can still be useful to
know the visibility of a prompt, so this patch adds a "Visible if" line
that shows the visibility only if the visibility is different from the
dependencies (which it isn't for most prompts in Linux).
Before:
Symbol: THUMB2_KERNEL [=n]
Type : bool
Defined at arch/arm/Kconfig:1417
Prompt: Compile the kernel in Thumb-2 mode
Depends on: (CPU_V7 [=y] || CPU_V7M [=n]) && !CPU_V6 [=n] && !CPU_V6K [=n]
Location:
-> Kernel Features
Selects: ARM_UNWIND [=n]
After:
Symbol: THUMB2_KERNEL [=n]
Type : bool
Defined at arch/arm/Kconfig:1417
Prompt: Compile the kernel in Thumb-2 mode
Depends on: (CPU_V7 [=y] || CPU_V7M [=n]) && !CPU_V6 [=n] && !CPU_V6K [=n]
Visible if: (CPU_V7 [=y] || CPU_V7M [=n]) && !CPU_V6 [=n] && !CPU_V6K [=n] && !CPU_THUMBONLY [=n]
Location:
-> Kernel Features
Selects: ARM_UNWIND [=n]
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In Kconfig, each symbol (representing a config option) can be defined in
multiple places. Each definition may or may not have a prompt, which
allows the option to be set via an interface like menuconfig. Each
definition has a set of dependencies, which determine whether its prompt
is visible and whether other pieces of the definition, like a default
value, take effect.
Historically, a symbol's help text (i.e. what's shown when a user
presses '?' in menuconfig) contained some symbol-wide information not
tied to any particular definition (e.g. what other symbols it selects)
as well as the location (file name and line number) and dependencies of
each prompt. Notably, the help text did not show the location or
dependencies of definitions without prompts.
Because this made it hard to reason about symbols that had no prompts,
commit bcdedcc1af ("menuconfig: print more info for symbol without
prompts") changed the help text so that, instead of containing the
location and dependencies of each prompt, it contained the location and
dependencies of the symbol's first definition, regardless of whether or
not that definition had a prompt.
For symbols with only one definition, that change makes sense. However,
it breaks down for symbols with multiple definitions: each definition
has its own set of dependencies (the `dep` field of `struct menu`), and
those dependencies are ORed together to get the symbol's dependency list
(the `dir_dep` field of `struct symbol`). By printing only the
dependencies of the first definition, the help text misleads users into
believing that an option is more narrowly-applicable than it actually
is.
For an extreme example of this, we can look at the SYS_TEXT_BASE symbol
in the Das U-Boot project (version 2019.10), which also uses Kconfig. (I
unfortunately could not find an illustrative example in Linux.) This
config option specifies the load address of the built binary and, as
such, is applicable to basically every configuration possible. And yet,
without this patch, its help text is as follows:
Symbol: SYS_TEXT_BASE [=]
Type : hex
Prompt: U-Boot base address
Location:
-> ARM architecture
Prompt: Text Base
Location:
-> Boot images
Defined at arch/arm/mach-aspeed/Kconfig:9
Depends on: ARM [=n] && ARCH_ASPEED [=n]
The help text indicates that the option is applicable only for a
specific unselected architecture (aspeed), because that architecture's
promptless definition (which just sets a default value), happens to be
the first one seen. No definition or dependency information is printed
for either of the two prompts listed.
Because source locations and dependencies are fundamentally properties
of definitions and not of symbols, we should treat them as such. This
patch brings back the pre-bcdedcc1afd6 behavior for definitions with
prompts but also separately prints the location and dependencies of
those without prompts, solving the original problem in a different way.
With this change, our SYS_TEXT_BASE example becomes
Symbol: SYS_TEXT_BASE [=]
Type : hex
Defined at arch/arm/mach-stm32mp/Kconfig:83
Prompt: U-Boot base address
Depends on: ARM [=n] && ARCH_STM32MP [=n]
Location:
-> ARM architecture
Defined at Kconfig:532
Prompt: Text Base
Depends on: !NIOS2 [=n] && !XTENSA [=n] && !EFI_APP [=n]
Location:
-> Boot images
Defined at arch/arm/mach-aspeed/Kconfig:9
Depends on: ARM [=n] && ARCH_ASPEED [=n]
Defined at arch/arm/mach-socfpga/Kconfig:25
Depends on: ARM [=n] && ARCH_SOCFPGA [=n]
<snip>
Defined at board/sifive/fu540/Kconfig:15
Depends on: RISCV [=n] && TARGET_SIFIVE_FU540 [=n]
which is a much more accurate representation.
Note that there is one notable difference between what gets printed for
prompts after this change and what got printed before bcdedcc1af: the
"Depends on" line now accurately represents the prompt's dependencies
instead of conflating those with the prompt's visibility (which can
include extra conditions). See the patch later in this series titled
"kconfig: distinguish between dependencies and visibility in help text"
for more details and better handling of that nuance.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since kernel configs provided by syzbot are close to "make allyesconfig",
it takes long time to rebuild. This is especially waste of time when we
need to rebuild for many times (e.g. doing manual printk() inspection,
bisect operations).
We can save time if we can exclude modules which are irrelevant to each
problem. But "make localmodconfig" cannot exclude modules which are built
into vmlinux because /sbin/lsmod output is used as the source of modules.
Therefore, this patch adds "make yes2modconfig" which converts from =y
to =m if possible. After confirming that the interested problem is still
reproducible, we can try "make localmodconfig" (and/or manually tune
based on "Modules linked in:" line) in order to exclude modules which are
irrelevant to the interested problem. While we are at it, this patch also
adds "make mod2yesconfig" which converts from =m to =y in case someone
wants to convert from =m to =y after "make localmodconfig".
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The top Makefile defines and exports the variable 'PERL'. Use it in
case somebody wants to specify a particular version of perl from the
command line.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is unused since commit cdfc47950a ("kconfig: search for a config
to base the local(mod|yes)config on").
Having unused $config is confusing because $config is used as a local
variable in various sub-routines.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
struct property can reference to the symbol that it is associated with
by prop->menu->sym.
Fix up the one usage of prop->sym, and remove sym from struct property.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
menu_add_prompt() is the only function that calls menu_add_prop() with
non-NULL prompt.
So, the code inside the if-conditional block of menu_add_prop() can be
moved to menu_add_prompt().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now that 'prompt' is only reduced from T_WORD_QUOTE without any action,
use T_WORD_QUOTE directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 8636a1f967 ("treewide: surround Kconfig file paths with double
quotes") killed use-cases to reduce an unquoted string into the 'prompt'
symbol.
Kconfig still allows to use an unquoted string in the context of menu,
source, or prompt.
So, you can omit quoting if the prompt is a single word:
bool foo
..., but I do not think this is so useful.
Let's require quoting:
bool "foo"
All the Kconfig files in the kernel are written in this way.
Remove the T_WORD from the right-hand side of the symbol 'prompt'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In menu_finalize(), the dependency of a menu entry is propagated
downwards.
For the 'menu', parent->dep and parent->prompt->visible.expr have
the same expression. Both accumulate the 'depends on' of itself and
upper menu entries.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit ba6ff60d5e ("kconfig: don't emit warning upon
rootmenu's prompt redefinition").
At that time, rootmenu.prompt was always set first, then it was set
again if a "mainmenu" statement was specified in the Kconfig file.
This is no longer the case since commit 0724a7c32a ("kconfig: Don't
leak main menus during parsing"). Remove the unneeded check.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit bc081dd6e9 ("kbuild: generate modules.builtin") added
infrastructure to generate modules.builtin, the list of all
builtin modules.
Basically, it works like this:
- Kconfig generates include/config/tristate.conf, the list of
tristate CONFIG options with a value in a capital letter.
- scripts/Makefile.modbuiltin makes Kbuild descend into
directories to collect the information of builtin modules.
I am not a big fan of it because Kbuild ends up with traversing
the source tree twice.
I am not sure how perfectly it should work, but this approach cannot
avoid false positives; even if the relevant CONFIG option is tristate,
some Makefiles forces obj-m to obj-y.
Some examples are:
arch/powerpc/platforms/powermac/Makefile:
obj-$(CONFIG_NVRAM:m=y) += nvram.o
net/ipv6/Makefile:
obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o
net/netlabel/Makefile:
obj-$(subst m,y,$(CONFIG_IPV6)) += netlabel_calipso.o
Nobody has complained about (or noticed) it, so it is probably fine to
have false positives in modules.builtin.
This commit simplifies the implementation. Let's exploit the fact
that every module has MODULE_LICENSE(). (modpost shows a warning if
MODULE_LICENSE is missing. If so, 0-day bot would already have blocked
such a module.)
I added MODULE_FILE to <linux/module.h>. When the code is being compiled
as builtin, it will be filled with the file path of the module, and
collected into modules.builtin.info. Then, scripts/link-vmlinux.sh
extracts the list of builtin modules out of it.
This new approach fixes the false-positives above, but adds another
type of false-positives; non-modular code may have MODULE_LICENSE()
by mistake. This is not a big deal, it is just the code is always
orphan. We can clean it up if we like. You can see cleanup examples by:
$ git log --grep='make.* explicitly non-modular'
To sum up, this commits deletes lots of code, but still produces almost
equivalent results. Please note it does not increase the vmlinux size at
all. As you can see in include/asm-generic/vmlinux.lds.h, the .modinfo
section is discarded in the link stage.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When compiling, Kbuild passes KBUILD_BASENAME (basename of the object)
and KBUILD_MODNAME (basename of the module).
This commit adds another one, KBUILD_MODFILE, which is the path of
the module. (or, the path of the module it would end up in if it were
compiled as a module.)
The next commit will use this to generate modules.builtin without
tristate.conf.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The built-in.a in a sub-directory is created by descending into that
directory. It does not depend on the other sub-directories. Loosen
the dependency.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Both 'obj-y += foo/' and 'obj-m += foo/' request Kbuild to visit the
sub-directory foo/, but the difference is that only the former combines
foo/built-in.a into the built-in.a of the current directory because
everything in sub-directories visited by obj-m is supposed to be modular.
So, it makes sense to create built-in.a only if that sub-directory is
reachable by the chain of obj-y. Otherwise, built-in.a will not be
linked into vmlinux anyway. For the same reason, it is pointless to
compile obj-y objects in the directory visited by obj-m.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cross compiling the x86 kernel on a non-x86 build machine produces
the following error when CONFIG_UNWINDER_ORC is enabled, regardless
of whether libelf-dev is installed or not.
dpkg-checkbuilddeps: error: Unmet build dependencies: libelf-dev
dpkg-buildpackage: warning: build dependencies/conflicts unsatisfied; aborting
dpkg-buildpackage: warning: (Use -d flag to override.)
Since this is a build time dependency for a build tool, we need to
depend on the native version of libelf-dev so add the appropriate
annotation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I noticed that randconfig builds with gcc no longer produce a lot of
ccache hits, unlike with clang, and traced this back to plugins
now being enabled unconditionally if they are supported.
I am now working around this by adding
export CCACHE_COMPILERCHECK=/usr/bin/size -A %compiler%
to my top-level Makefile. This changes the heuristic that ccache uses
to determine whether the plugins are the same after a 'make clean'.
However, it also seems that being able to just turn off the plugins is
generally useful, at least for build testing it adds noticeable overhead
but does not find a lot of bugs additional bugs, and may be easier for
ccache users than my workaround.
Fixes: 9f671e5815 ("security: Create "kernel hardening" config area")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20191211133951.401933-1-arnd@arndb.de
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
This adds the following commits from upstream:
c40aeb60b47a travis.yml: Run tests on the non-x86 builders, too
9f86aff444f4 Add .cirrus.yml for FreeBSD build
34c82275bae6 Avoid gnu_printf attribute when using Clang
743000931bc9 tests: default to 'cc' if CC not set
adcd676491cc Add test-case for trailing zero
d9c55f855b65 Remove trailing zero from the overlay path
7a22132c79ec pylibfdt: Adjust for deprecated test methods
dbe80d577ee2 tests: add extension to sed -i for GNU/BSD sed compatibility
af57d440d887 libfdt: Correct prototype for fdt_ro_probe_()
6ce585ac153b Use correct inttypes.h format specifier
715028622547 support byacc in addition to bison
fdf3f6d897ab pylibfdt: Correct the type for fdt_property_stub()
430419c28100 tests: fix some python warnings
588a29ff2e4e util: use gnu_printf format attribute
bc876708ab1d fstree: replace lstat with stat
4c3c4ccb9916 dumptrees: pass outputdir as first argument
aa522da9fff6 tests: allow out-of-tree test run
0d0d0fa51b1f fdtoverlay: Return non-zero exit code if overlays can't be applied
4605eb047b38 Add .editorconfig
18d7b2f4ee45 yamltree: Ensure consistent bracketing of properties with phandles
67f790c1adcc libfdt.h: add explicit cast from void* to uint8_t* in fdt(32|64)_st
b111122ea5eb pylibfdt: use python3 shebang
60e0db3d65a1 Ignore phandle properties in /aliases
95ce19c14064 README: update for Python 3
5345db19f615 livetree: simplify condition in get_node_by_path
b8d6eca78210 libfdt: Allow #size-cells of 0
184f51099471 Makefile: Add EXTRA_CFLAGS variable
812b1956a076 libfdt: Tweak data handling to satisfy Coverity
5c715a44776a fdtoverlay: Ignore symbols in overlays which don't apply to the target tree
b99353474850 fdtoverlay: Allow adding labels to __overlay__ nodes in overlays
d6de81b81b68 pylibfdt: Add support for fdt_get_alias()
1c17714dbb3a pylibfdt: Correct the FdtSw example
ad57e4574a37 tests: Add a failed test case for 'fdtoverlay' with long target path
bbe3b36f542b fdtoverlay: Rework output allocation
6c2e61f08396 fdtoverlay: Improve error messages
297f5abb362e fdtoverlay: Check for truncated overlay blobs
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Rob Herring <robh@kernel.org>
- fix warning in out-of-tree 'make clean'
- add READELF variable to the top Makefile
- fix broken builds when LINUX_COMPILE_BY contains a backslash
- fix build warning in kallsyms
- fix NULL pointer access in expr_eq() in Kconfig
- fix missing dependency on rsync in deb-pkg build
- remove ---help--- from documentation
- fix misleading documentation about directory descending
-----BEGIN PGP SIGNATURE-----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=OKOu
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix warning in out-of-tree 'make clean'
- add READELF variable to the top Makefile
- fix broken builds when LINUX_COMPILE_BY contains a backslash
- fix build warning in kallsyms
- fix NULL pointer access in expr_eq() in Kconfig
- fix missing dependency on rsync in deb-pkg build
- remove ---help--- from documentation
- fix misleading documentation about directory descending
* tag 'kbuild-fixes-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: clarify the difference between obj-y and obj-m w.r.t. descending
kconfig: remove ---help--- from documentation
scripts: package: mkdebian: add missing rsync dependency
kconfig: don't crash on NULL expressions in expr_eq()
scripts/kallsyms: fix offset overflow of kallsyms_relative_base
mkcompile_h: use printf for LINUX_COMPILE_BY
mkcompile_h: git rid of UTS_TRUNCATE from LINUX_COMPILE_{BY,HOST}
x86/boot: kbuild: allow readelf executable to be specified
kbuild: fix 'No such file or directory' warning when cleaning
scripts/conmakehash is only used for generating
drivers/tty/vt/consolemap_deftbl.c
Move it to the related directory.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20191217110633.8796-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We've missed the dependency to rsync, so build fails on
minimal containers.
Fixes: 59b2bd05f5 ("kbuild: add 'headers' target to build up uapi headers in usr/include")
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
NULL expressions are taken to always be true, as implemented by the
expr_is_yes() macro and by several other functions in expr.c. As such,
they ought to be valid inputs to expr_eq(), which compares two
expressions.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 5e5c4fa787 ("scripts/kallsyms: shrink table before
sorting it"), kallsyms_relative_base can be larger than _text, which
causes overflow when building the 32-bit kernel.
https://lkml.org/lkml/2019/12/7/156
This is because _text is, unless --all-symbols is specified, now
trimmed from the symbol table before record_relative_base() is called.
Handle the offset signedness also for kallsyms_relative_base. Introduce
a new helper, output_address(), to reduce the code duplication.
Fixes: 5e5c4fa787 ("scripts/kallsyms: shrink table before sorting it")
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 858805b336 ("kbuild: add $(BASH) to run scripts with
bash-extension") shed light on portability issues. Here is another one.
Since commit f07726048d ("Fix handling of backlash character in
LINUX_COMPILE_BY name"), we must escape a backslash contained in
LINUX_COMPILE_BY. This is not working on such distros as Ubuntu.
As the POSIX spec [1] says, if any of the operands contain a backslash
( '\' ) character, the results are implementation-defined.
The actual shell of /bin/sh could be bash, dash, etc. depending on
distros, and the behavior of builtin echo command is different among
them.
The bash builtin echo, unless -e is given, copies the arguments to
stdout without expanding escape sequences (BSD-like behavior).
The dash builtin echo, in contrast, adopts System V behavior, which
does expand escape sequences without any option given.
Even non-builtin /bin/echo behaves differently depending on the system.
Due to these variations, echo is considered as a non-portable command.
Using printf is the common solution to avoid the portability issue.
[1] https://pubs.opengroup.org/onlinepubs/009695399/utilities/echo.html
Fixes: 858805b336 ("kbuild: add $(BASH) to run scripts with bash-extension")
Reported-by: XXing Wei <xxing.wei@unisoc.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
UTS_VERSION is set to struct uts_namespace, hence a too long string
should be truncated so it fits in 64 characters.
On the other hand, LINUX_COMPILE_BY/HOST are not set to uts_namespace.
They are just used in the banners, which do not have specific length
limitation.
I dug into the git history, but I could not find the reason why
these two strings must fit in 64 characters. Remove them.
Now that UTS_VERSION is the only user of UTS_TRUNCATE, I squashed it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now that the orc_unwind and orc_unwind_ip tables are sorted at build time,
remove the boot time sorting pass.
No change in functionality.
[ mingo: Rewrote the changelog and code comments. ]
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kbuild@vger.kernel.org
Link: https://lkml.kernel.org/r/20191204004633.88660-8-shile.zhang@linux.alibaba.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The ORC unwinder has two tables: .orc_unwind_ip and .orc_unwind, which
need to be sorted for binary search. Previously this sorting was done
during bootup.
Sort them at build time to speed up booting.
Add the ORC tables sorting in a parallel build process to speed up the build.
[ mingo: Rewrote the changelog and fixed some comments. ]
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Link: https://lkml.kernel.org/r/20191204004633.88660-7-shile.zhang@linux.alibaba.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use a more generic name for additional table sorting usecases,
such as the upcoming ORC table sorting feature. This tool is
not tied to exception table sorting anymore.
No functional changes intended.
[ mingo: Rewrote the changelog. ]
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Link: https://lkml.kernel.org/r/20191204004633.88660-6-shile.zhang@linux.alibaba.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Refine the loop, naming and code structure, make the code more readable
and extendable. No functional changes intended.
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Link: https://lkml.kernel.org/r/20191204004633.88660-5-shile.zhang@linux.alibaba.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The scripts/sortextable.c code has originally copied some code from
scripts/recordmount.c, which used the same setjmp/longjmp method to
manage control flow.
Meanwhile recordmcount has improved its error handling via:
3f1df12019 ("recordmcount: Rewrite error/success handling").
So rewrite this part of sortextable as well to get rid of the setjmp/longjmp
kludges, with additional refactoring, to make it more readable and
easier to extend.
No functional changes intended.
[ mingo: Rewrote the changelog. ]
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Link: https://lkml.kernel.org/r/20191204004633.88660-2-shile.zhang@linux.alibaba.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAl3uHtsACgkQUqAMR0iA
lPKN3g/9HG6k7NIVtArCy/0kdxLOCr1JZp0EhOCexvCFLSOXInJ82izQVblOA+XE
+1AceBqF5Akg23u/oLH9tSXBjMULemTyhm7Pnnopn1+bX/bfF+nN6027ltH8ncPY
25oOP22ulUko3smI2yj2/gmRG5J6z/bUxe/4BMBATsj5YKJs3XGOHtfj2rgVd2qc
HzPPirH82uOj8sBYxTMeq/+QpCzfJ5HdXXkcJGDuzEW078vb8eRgpcXIqscTBB5Z
pTsG+Io5/RzfKIDWLs7Eqgg9qSzcGrpXZxPsWpCXXL9nArdeA78ZBLIreDSZIpEt
QBQMT8Yxy34oW1npw1tFgulxZFjF6np2eg+3a6VX3vqo7DIIAU0gqlTRCde30tNW
RedFSZIKrlfKfVUJXcBV9sNU57vUx7WwURPnlQxyMmbp0ryf6vhxT3ybPhf8yFXk
WIKf7PngxLxMRtkRL5rZRDAA6z3/SPg6WkWFzDa/jZKCRRob/uM/35GxWzBk4xR0
MhCesVDCpM1oB+qgJkJRhyHhddzu3nafxtpjBnrKOUHke+qF5u36BXFDSZZHUSkz
VXshmaaPcWfHOl2DBGL8SJmYartr/ASvd5TPUbfnqYM1h7+wkB1gZkX8MgSHzc9b
EYPfmipWh9LsZ1OjSJoFkMIB5bOIaYefOdSUyPDlJwhRuliboWE=
=d5HL
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.5-pr-warning-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull pr_warning() removal from Petr Mladek.
- Final removal of the unused pr_warning() alias.
You're supposed to use just "pr_warn()" in the kernel.
* tag 'printk-for-5.5-pr-warning-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
checkpatch: Drop pr_warning check
printk: Drop pr_warning definition
Fix up for "printk: Drop pr_warning definition"
workqueue: Use pr_warn instead of pr_warning
Pull networking fixes from David Miller:
1) More jumbo frame fixes in r8169, from Heiner Kallweit.
2) Fix bpf build in minimal configuration, from Alexei Starovoitov.
3) Use after free in slcan driver, from Jouni Hogander.
4) Flower classifier port ranges don't work properly in the HW offload
case, from Yoshiki Komachi.
5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.
6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.
7) Fix flow dissection in dsa TX path, from Alexander Lobakin.
8) Stale syncookie timestampe fixes from Guillaume Nault.
[ Did an evil merge to silence a warning introduced by this pull - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
r8169: fix rtl_hw_jumbo_disable for RTL8168evl
net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
r8169: add missing RX enabling for WoL on RTL8125
vhost/vsock: accept only packets with the right dst_cid
net: phy: dp83867: fix hfs boot in rgmii mode
net: ethernet: ti: cpsw: fix extra rx interrupt
inet: protect against too small mtu values.
gre: refetch erspan header from skb->data after pskb_may_pull()
pppoe: remove redundant BUG_ON() check in pppoe_pernet
tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
tcp: tighten acceptance of ACKs not matching a child socket
tcp: fix rejected syncookies due to stale timestamps
lpc_eth: kernel BUG on remove
tcp: md5: fix potential overestimation of TCP option space
net: sched: allow indirect blocks to bind to clsact in TC
net: core: rename indirect block ingress cb function
net-sysfs: Call dev_hold always in netdev_queue_add_kobject
net: dsa: fix flow dissection on Tx path
net/tls: Fix return values to avoid ENOTSUPP
net: avoid an indirect call in ____sys_recvmsg()
...
The is_maintained_obsolete function can be called twice using the same
filename. This function spawns a process using get_maintainer.pl.
Store the status of each filename when spawned and use the stored result
to eliminate the spawning of unnecessary duplicate child processes.
Example:
old:
$ time ./scripts/checkpatch.pl hp100-Move-to-staging.patch > /dev/null
real 0m1.767s
user 0m1.634s
sys 0m0.141s
new:
$ time ./scripts/checkpatch.pl hp100-Move-to-staging.patch > /dev/null
real 0m1.184s
user 0m1.085s
sys 0m0.103s
Link: http://lkml.kernel.org/r/b982566a2b9b4825badce36fdfc3032bd0005151.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ignore all upper-case variants before and after SI units like mA, mV and
uV so uses like RANGE_mA do not emit a CAMELCASE message.
Link: http://lkml.kernel.org/r/5ce6f9131327fd2e12d7a0e20a55f588448de090.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jules Irenge <jbi.octave@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A Fixes: lines in a commit message generally indicate that a previous
commit was inadequate for whatever reason.
The signers of the previous inadequate commit should also be cc'd on
this new commit so update get_maintainer to find the old commit and add
the original signers.
Link: http://lkml.kernel.org/r/33605b9fc0e0f711236951ae84185a6218acff4f.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- remove unneeded asm headers from hexagon, ia64
- add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving
- add 'helpnewconfig' target, which shows help for new CONFIG options
- support 'make nsdeps' for external modules
- make rebuilds faster by deleting $(wildcard $^) checks
- remove compile tests for kernel-space headers
- refactor modpost to simplify modversion handling
- make single target builds faster
- optimize and clean up scripts/kallsyms.c
- refactor various Makefiles and scripts
-----BEGIN PGP SIGNATURE-----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=zUaB
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- remove unneeded asm headers from hexagon, ia64
- add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving
- add 'helpnewconfig' target, which shows help for new CONFIG options
- support 'make nsdeps' for external modules
- make rebuilds faster by deleting $(wildcard $^) checks
- remove compile tests for kernel-space headers
- refactor modpost to simplify modversion handling
- make single target builds faster
- optimize and clean up scripts/kallsyms.c
- refactor various Makefiles and scripts
* tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (59 commits)
MAINTAINERS: update Kbuild/Kconfig maintainer's email address
scripts/kallsyms: remove redundant initializers
scripts/kallsyms: put check_symbol_range() calls close together
scripts/kallsyms: make check_symbol_range() void function
scripts/kallsyms: move ignored symbol types to is_ignored_symbol()
scripts/kallsyms: move more patterns to the ignored_prefixes array
scripts/kallsyms: skip ignored symbols very early
scripts/kallsyms: add const qualifiers where possible
scripts/kallsyms: make find_token() return (unsigned char *)
scripts/kallsyms: replace prefix_underscores_count() with strspn()
scripts/kallsyms: add sym_name() to mitigate cast ugliness
scripts/kallsyms: remove unneeded length check for prefix matching
scripts/kallsyms: remove redundant is_arm_mapping_symbol()
scripts/kallsyms: set relative_base more effectively
scripts/kallsyms: shrink table before sorting it
scripts/kallsyms: fix definitely-lost memory leak
scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE
kbuild: make single target builds even faster
modpost: respect the previous export when 'exported twice' is warned
modpost: do not set ->preloaded for symbols from Module.symvers
...
- Various kerneldoc script enhancements.
- More RST conversions; those are slowing down as we run out of things to
convert, but we're a ways from done still.
- Dan's "maintainer profile entry" work landed at last. Now we just need
to get maintainers to fill in the profiles...
- A reworking of the parallel build setup to work better with a variety of
systems (and to not take over huge systems entirely in particular).
- The MAINTAINERS file is now converted to RST during the build.
Hopefully nobody ever tries to print this thing, or they will need to
load a lot of paper.
- A script and documentation making it easy for maintainers to add Link:
tags at commit time.
Also included is the removal of a bunch of spurious CR characters.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl3j5B0PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YtBcH/jIN2cO8/0YW2rjVT+1G6ytSdFUKx5WJ/lpf
5uBeCvuCeYhtCB6+BgnXvjykJ7jDW11/NJNjWqz/gsvD5l5FJK1rXarI/oz2Klyi
kcPtDmBF/ki4wz9qXzEpa0vg8LXdjeys50S1vE75qCzxZoPP7YjuRbPnLrlIJukv
JbDVi4p9kxgeHfRB4+BHOe5rFwA3mMmaxKNIX34Y+UUO2KZ0g/yUi1bAaQwQAdt+
PsORmkVQ8Puh3K9xRIr7dYlcWBlBiPqzYdvDgTVxSjrxdK6wjYjSgVk2VjC5MBUN
mTSTWgyfsIcD/76/s8tq7ZRl2fw+SkCSkFo79Rb/hJwDTb7Vnng=
=LPBr
-----END PGP SIGNATURE-----
Merge tag 'docs-5.5a' of git://git.lwn.net/linux
Pull Documentation updates from Jonathan Corbet:
"Here are the main documentation changes for 5.5:
- Various kerneldoc script enhancements.
- More RST conversions; those are slowing down as we run out of
things to convert, but we're a ways from done still.
- Dan's "maintainer profile entry" work landed at last. Now we just
need to get maintainers to fill in the profiles...
- A reworking of the parallel build setup to work better with a
variety of systems (and to not take over huge systems entirely in
particular).
- The MAINTAINERS file is now converted to RST during the build.
Hopefully nobody ever tries to print this thing, or they will need
to load a lot of paper.
- A script and documentation making it easy for maintainers to add
Link: tags at commit time.
Also included is the removal of a bunch of spurious CR characters"
* tag 'docs-5.5a' of git://git.lwn.net/linux: (91 commits)
docs: remove a bunch of stray CRs
docs: fix up the maintainer profile document
libnvdimm, MAINTAINERS: Maintainer Entry Profile
Maintainer Handbook: Maintainer Entry Profile
MAINTAINERS: Reclaim the P: tag for Maintainer Entry Profile
docs, parallelism: Rearrange how jobserver reservations are made
docs, parallelism: Do not leak blocking mode to other readers
docs, parallelism: Fix failure path and add comment
Documentation: Remove bootmem_debug from kernel-parameters.txt
Documentation: security: core.rst: fix warnings
Documentation/process/howto/kokr: Update for 4.x -> 5.x versioning
Documentation/translation: Use Korean for Korean translation title
docs/memory-barriers.txt: Remove remaining references to mmiowb()
docs/memory-barriers.txt/kokr: Update I/O section to be clearer about CPU vs thread
docs/memory-barriers.txt/kokr: Fix style, spacing and grammar in I/O section
Documentation/kokr: Kill all references to mmiowb()
docs/memory-barriers.txt/kokr: Rewrite "KERNEL I/O BARRIER EFFECTS" section
docs: Add initial documentation for devfreq
Documentation: Document how to get links with git am
docs: Add request_irq() documentation
...
- DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404 interconnect,
Unisoc/Spreadtrum SoCs and UART
- Convert a bunch of Samsung bindings to DT schema
- Convert a bunch of ST stm32 bindings to DT schema
- Realtek and Exynos additions to Arm Mali bindings
- Fix schema errors in RiscV CPU schema
- Various schema fixes from improved meta-schema checks
- Improve the handling of 'dma-ranges' and in particular fix DMA mask
setup on PCI bridges
- Fix a memory leak in add_changeset_property() and DT unit tests.
- Several documentation improvements for schema validation
- Rework build rules to improve schema validation errors
- Color output for dtx_diff
-----BEGIN PGP SIGNATURE-----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=L6uq
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
- DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404
interconnect, Unisoc/Spreadtrum SoCs and UART
- Convert a bunch of Samsung bindings to DT schema
- Convert a bunch of ST stm32 bindings to DT schema
- Realtek and Exynos additions to Arm Mali bindings
- Fix schema errors in RiscV CPU schema
- Various schema fixes from improved meta-schema checks
- Improve the handling of 'dma-ranges' and in particular fix DMA mask
setup on PCI bridges
- Fix a memory leak in add_changeset_property() and DT unit tests.
- Several documentation improvements for schema validation
- Rework build rules to improve schema validation errors
- Color output for dtx_diff
* tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits)
libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
dt-bindings: arm: Remove leftover axentia.txt
of: unittest: fix memory leak in attach_node_and_children
of: overlay: add_changeset_property() memory leak
dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes
dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems
dt-bindings: power: Rename back power_domain.txt bindings to fix references
dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
dt-bindings: remoteproc: convert stm32-rproc to json-schema
dt-bindings: mailbox: convert stm32-ipcc to json-schema
dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
dt-bindings: crypto: Convert stm32 HASH bindings to json-schema
dt-bindings: rng: Convert stm32 RNG bindings to json-schema
dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
dt-bindings: pwm: Convert PWM bindings to json-schema
dt-bindings: serial: Add a new compatible string for SC9863A
dt-bindings: serial: Convert sprd-uart to json-schema
dt-bindings: arm: Add bindings for Unisoc SC9863A
...
Daniel Borkmann says:
====================
pull-request: bpf 2019-12-02
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 6 day(s) which contain
a total of 10 files changed, 60 insertions(+), 51 deletions(-).
The main changes are:
1) Fix vmlinux BTF generation for binutils pre v2.25, from Stanislav Fomichev.
2) Fix libbpf global variable relocation to take symbol's st_value offset
into account, from Andrii Nakryiko.
3) Fix libbpf build on powerpc where check_abi target fails due to different
readelf output format, from Aurelien Jarno.
4) Don't set BPF insns RO for the case when they are JITed in order to avoid
fragmenting the direct map, from Daniel Borkmann.
5) Fix static checker warning in btf_distill_func_proto() as well as a build
error due to empty enum when BPF is compiled out, from Alexei Starovoitov.
6) Fix up generation of bpf_helper_defs.h for perf, from Arnaldo Carvalho de Melo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are some of the more common spelling mistakes and typos that I've
found while fixing up spelling mistakes in the kernel since July 2019.
Link: http://lkml.kernel.org/r/20191112092142.97989-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While trying to figure out why fentry_fexit selftest doesn't pass for me
(old pahole, broken BTF), I found out that my latest patch can break vmlinux
.BTF generation. objcopy preserves section start when doing --only-section,
so there is a chance (depending on where pahole inserts .BTF section) to
have leading empty zeroes. Let's explicitly force section offset to zero.
Before:
$ objcopy --set-section-flags .BTF=alloc -O binary \
--only-section=.BTF vmlinux .btf.vmlinux.bin
$ xxd .btf.vmlinux.bin | head -n1
00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
After:
$ objcopy --change-section-address .BTF=0 \
--set-section-flags .BTF=alloc -O binary \
--only-section=.BTF vmlinux .btf.vmlinux.bin
$ xxd .btf.vmlinux.bin | head -n1
00000000: 9feb 0100 1800 0000 0000 0000 80e1 1c00 ................
^BTF magic
As part of this change, I'm also dropping '2>/dev/null' from objcopy
invocation to be able to catch possible other issues (objcopy doesn't
produce any warnings for me anymore, it did before with --dump-section).
Fixes: da5fb18225 ("bpf: Support pre-2.25-binutils objcopy for vmlinux BTF")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191127225759.39923-1-sdf@google.com
If vmlinux BTF generation fails, but CONFIG_DEBUG_INFO_BTF is set,
.BTF section of vmlinux is empty and kernel will prohibit
BPF loading and return "in-kernel BTF is malformed".
--dump-section argument to binutils' objcopy was added in version 2.25.
When using pre-2.25 binutils, BTF generation silently fails. Convert
to --only-section which is present on pre-2.25 binutils.
Documentation/process/changes.rst states that binutils 2.21+
is supported, not sure those standards apply to BPF subsystem.
v2:
* exit and print an error if gen_btf fails (John Fastabend)
v3:
* resend with Andrii's Acked-by/Tested-by tags
Fixes: 341dfcf8d7 ("btf: expose BTF info through sysfs")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191127161410.57327-1-sdf@google.com
Add support for printing fwnode names using a new conversion
specifier "%pfw" (Sakari Ailus), clean up the software node and
efi/apple-properties code in preparation for improved software node
reference properties handling (Dmitry Torokhov) and fix the struct
fwnode_operations description (Heikki Krogerus).
-----BEGIN PGP SIGNATURE-----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=VcCH
-----END PGP SIGNATURE-----
Merge tag 'devprop-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"Add support for printing fwnode names using a new conversion specifier
"%pfw" (Sakari Ailus), clean up the software node and
efi/apple-properties code in preparation for improved software node
reference properties handling (Dmitry Torokhov) and fix the struct
fwnode_operations description (Heikki Krogerus)"
* tag 'devprop-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
software node: simplify property_entry_read_string_array()
software node: unify PROPERTY_ENTRY_XXX macros
software node: remove property_entry_read_uNN_array functions
software node: get rid of property_set_pointer()
software node: clean up property_copy_string_array()
software node: mark internal macros with double underscores
efi/apple-properties: use PROPERTY_ENTRY_U8_ARRAY_LEN
software node: introduce PROPERTY_ENTRY_XXX_ARRAY_LEN()
software node: remove DEV_PROP_MAX
device property: Fix the description of struct fwnode_operations
lib/test_printf: Add tests for %pfw printk modifier
lib/vsprintf: Add %pfw conversion specifier for printing fwnode names
lib/vsprintf: OF nodes are first and foremost, struct device_nodes
lib/vsprintf: Make use of fwnode API to obtain node names and separators
lib/vsprintf: Add a note on re-using %pf or %pF
lib/vsprintf: Remove support for %pF and %pf in favour of %pS and %ps
device property: Add a function to obtain a node's prefix
device property: Add fwnode_get_name for returning the name of a node
device property: Add functions for accessing node's parents
device property: Move fwnode_get_parent() up
...
Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:
1) Support alternative names for network devices, from Jiri Pirko.
2) Introduce per-netns netdev notifiers, also from Jiri Pirko.
3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
Larsen.
4) Allow compiling out the TLS TOE code, from Jakub Kicinski.
5) Add several new tracepoints to the kTLS code, also from Jakub.
6) Support set channels ethtool callback in ena driver, from Sameeh
Jubran.
7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.
8) Add XDP support to mvneta driver, from Lorenzo Bianconi.
9) Lots of netfilter hw offload fixes, cleanups and enhancements,
from Pablo Neira Ayuso.
10) PTP support for aquantia chips, from Egor Pomozov.
11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
Josh Hunt.
12) Add smart nagle to tipc, from Jon Maloy.
13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
Duvvuru.
14) Add a flow mask cache to OVS, from Tonghao Zhang.
15) Add XDP support to ice driver, from Maciej Fijalkowski.
16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.
17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.
18) Support it in stmmac driver too, from Jose Abreu.
19) Support TIPC encryption and auth, from Tuong Lien.
20) Introduce BPF trampolines, from Alexei Starovoitov.
21) Make page_pool API more numa friendly, from Saeed Mahameed.
22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.
23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
libbpf: Fix usage of u32 in userspace code
mm: Implement no-MMU variant of vmalloc_user_node_flags
slip: Fix use-after-free Read in slip_open
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
macvlan: schedule bc_work even if error
enetc: add support Credit Based Shaper(CBS) for hardware offload
net: phy: add helpers phy_(un)lock_mdio_bus
mdio_bus: don't use managed reset-controller
ax88179_178a: add ethtool_op_get_ts_info()
mlxsw: spectrum_router: Fix use of uninitialized adjacency index
mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
bpf: Simplify __bpf_arch_text_poke poke type handling
bpf: Introduce BPF_TRACE_x helper for the tracing tests
bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
bpf, testing: Add various tail call test cases
bpf, x86: Emit patchable direct jump as tail call
bpf: Constant map key tracking for prog array pokes
bpf: Add poke dependency tracking for prog array maps
bpf: Add initial poke descriptor table for jit images
bpf: Move owner type, jited info into array auxiliary data
...
-----BEGIN PGP SIGNATURE-----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=QCEy
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow to print symbolic error names via new %pe modifier.
- Use pr_warn() instead of the remaining pr_warning() calls. Fix
formatting of the related lines.
- Add VSPRINTF entry to MAINTAINERS.
* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
checkpatch: don't warn about new vsprintf pointer extension '%pe'
MAINTAINERS: Add VSPRINTF
tools lib api: Renaming pr_warning to pr_warn
ASoC: samsung: Use pr_warn instead of pr_warning
lib: cpu_rmap: Use pr_warn instead of pr_warning
trace: Use pr_warn instead of pr_warning
dma-debug: Use pr_warn instead of pr_warning
vgacon: Use pr_warn instead of pr_warning
fs: afs: Use pr_warn instead of pr_warning
sh/intc: Use pr_warn instead of pr_warning
scsi: Use pr_warn instead of pr_warning
platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
platform/x86: asus-laptop: Use pr_warn instead of pr_warning
platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
oprofile: Use pr_warn instead of pr_warning
of: Use pr_warn instead of pr_warning
macintosh: Use pr_warn instead of pr_warning
idsn: Use pr_warn instead of pr_warning
ide: Use pr_warn instead of pr_warning
crypto: n2: Use pr_warn instead of pr_warning
...
Unless the address range matters, symbols can be ignored earlier,
which avoids unneeded memory allocation.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The callers of this function expect (unsigned char *). I do not see
a good reason to make this function return (void *).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
You can do equivalent things with strspn(). I do not see noticeable
performance difference.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
sym_entry::sym is (unsigned char *) instead of (char *) because
kallsyms exploits the MSB for compression, and the characters are
used as the index of token_profit array.
However, it requires casting (unsigned char *) to (char *) in some
places since standard library functions such as strcmp(), strlen()
expect (char *).
Introduce a new helper, sym_name(), which advances the given pointer
by 1 and casts it to (char *).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit 6f00df24ee ("[PATCH] Strip local symbols from kallsyms"),
all symbols starting '$' are ignored.
is_arm_mapping_symbol() particularly ignores $a, $t, etc. but it is
redundant.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, record_relative_base() iterates over the entire table to
find the minimum address, but it is not efficient because we sort
the table anyway.
After sort_symbol(), the table is sorted by address. (kallsyms parses
the 'nm -n' output, so the data is already sorted by address, but this
commit does not rely on it.)
Move record_relative_base() after sort_symbols(), and take the first
non-absolute symbol value.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, build_initial_tok_table() trims unused symbols, but it is
called after sort_symbols().
It is not efficient to sort the huge table that contains unused entries.
Shrink the table before sorting it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
build_initial_tok_table() overwrites unused sym_entry to shrink the
table size. Before the entry is overwritten, table[i].sym must be freed
since it is malloc'ed data.
This fixes the 'definitely lost' report from valgrind. I ran valgrind
against x86_64_defconfig of v5.4-rc8 kernel, and here is the summary:
[Before the fix]
LEAK SUMMARY:
definitely lost: 53,184 bytes in 2,874 blocks
[After the fix]
LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When 'exported twice' is warned, let sym_add_exported() return without
updating the symbol info. This respects the previous export, which is
ordered first in modules.order
This simplifies the code too.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Now that there is no overwrap between symbols from ELF files and
ones from Module.symvers.
So, the 'exported twice' warning should be reported irrespective
of where the symbol in question came from.
The exceptional case is external module; in some cases, we build
an external module to provide a different version/variant of the
corresponding in-kernel module, overriding the same set of exported
symbols.
You can see this use-case in upstream; tools/testing/nvdimm/libnvdimm.ko
replaces drivers/nvdimm/libnvdimm.ko in order to link it against mocked
version of core kernel symbols.
So, let's relax the 'exported twice' warning when building external
modules. The multiple export from external modules is warned only
when the previous one is from vmlinux or itself.
With this refactoring, the ugly preloading goes away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is complicated to add mocked-up symbols for pre-handling CRC.
Handle CRC after all the export symbols in the relevant module
are registered.
Call handle_modversion() after the handle_symbol() iteration.
In some cases, I see atand-alone __crc_* without __ksymtab_*.
For example, ARCH=arm allyesconfig produces __crc_ccitt_veneer and
__crc_itu_t_veneer. I guess they come from crc_ccitt, crc_itu_t,
respectively. Since __*_veneer are auto-generated symbols, just
ignore them.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This function handles not only modversions, but also unresolved
symbols, export symbols, etc.
Rename it to a more proper function name.
While I was here, I also added the 'const' qualifier to *sym.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, namespace_from_kstrtabns() relies on the fact that
namespace strings are recorded in the __ksymtab_strings section.
Actually, it is coded in include/linux/export.h, but modpost does
not need to hard-code the section name.
Elf_Sym::st_shndx holds the index of the relevant section. Using it is
a more portable way to get the namespace string.
Make namespace_from_kstrtabns() simply call sym_get_data(), and delete
the info->ksymtab_strings .
While I was here, I added more 'const' qualifiers to pointers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When CONFIG_MODULE_REL_CRCS is enabled, the value of __crc_* is not
an absolute value, but the address to the CRC data embedded in the
.rodata section.
Getting the data pointed by the symbol value is somewhat complex.
Split it out into a new helper, sym_get_data().
I will reuse it to refactor namespace_from_kstrtabns() in the next
commit.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Rasmus correctly observed that the existing jobserver reservation only
worked if no other build targets were specified. The correct approach
is to hold the jobserver slots until sphinx has finished. To fix this,
the following changes are made:
- refactor (and rename) scripts/jobserver-exec to set an environment
variable for the maximally reserved jobserver slots and exec a
child, to release the slots on exit.
- create Documentation/scripts/parallel-wrapper.sh which examines both
$PARALLELISM and the detected "-jauto" logic from Documentation/Makefile
to decide sphinx's final -j argument.
- chain these together in Documentation/Makefile
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/lkml/eb25959a-9ec4-3530-2031-d9d716b40b20@rasmusvillemoes.dk
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20191121205929.40371-4-keescook@chromium.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This adds KCSAN instrumentation to atomic-instrumented.h.
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Kernel Concurrency Sanitizer (KCSAN) is a dynamic data-race detector for
kernel space. KCSAN is a sampling watchpoint-based data-race detector.
See the included Documentation/dev-tools/kcsan.rst for more details.
This patch adds basic infrastructure, but does not yet enable KCSAN for
any architecture.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
- Handle CC variables containing quotes in tools-support-relr.sh script
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl3OiRAACgkQt6xw3ITB
YzQMhwgAgZl+QQPLhEMLQHvqaDtLb3l08vPPrLCDWHon5IaHMz1HCGB+/5CMaCG5
9X9tEiy2xg5X9aHSyI7T7qmjqUGkXTKn1OzeSNxHJh8IUsvFN30UKm2lEewoRq1V
WR8HfC/h1Ff+b2502/gg96KZxWBnzbN2XmZ3cEtLCHsj8OrRq6mFeqMxgnD8xE3D
DceJ3v48ziYV2LUOM8/ZLJ8CzwWcSiNYIqJghjgbC2q83+czxne6KRGwx/4muWaX
OpMa5tvbeVirMOThr3BGpuDe/JTkygVXFfw7jS/mNbV6ALwf9E8neinnoTFNp7Tq
7tpBkRHxB3vB6tLnnBJIjNfl1KbaJA==
=YqcT
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"One trivial fix for -rc8/final that ensures that the script used to
detect RELR relocation support in the toolchain works correctly when
$CC contains quotes. Although it fails safely (by failing to detect
the support when it exists), it would be nice to have this fixed in
5.4 given that it was only introduced in the last merge window.
Summary:
- Handle CC variables containing quotes in tools-support-relr.sh
script"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
scripts/tools-support-relr.sh: un-quote variables
Currently, some sanity checks for uapi headers are done by
scripts/headers_check.pl, which is wired up to the 'headers_check'
target in the top Makefile.
It is true compiling headers has better test coverage, but there
are still several headers excluded from the compile test. I like
to keep headers_check.pl for a while, but we can delete a lot of
code by moving the build rule to usr/include/Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There are both positive and negative options about this feature.
At first, I thought it was a good idea, but actually Linus stated a
negative opinion (https://lkml.org/lkml/2019/9/29/227). I admit it
is ugly and annoying.
The baseline I'd like to keep is the compile-test of uapi headers.
(Otherwise, kernel developers have no way to ensure the correctness
of the exported headers.)
I will maintain a small build rule in usr/include/Makefile.
Remove the other header test functionality.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This extension was introduced in commit 57f5677e53 ("printf: add
support for printing symbolic error names").
Link: http://lkml.kernel.org/r/20191114100416.23928-1-u.kleine-koenig@pengutronix.de
To: Andy Whitcroft <apw@canonical.com>
To: Joe Perches <joe@perches.com>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: kernel@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
[pmladek@suse.com: Switched the ordering: eE -> Ee]
Signed-off-by: Petr Mladek <pmladek@suse.com>
When the CC variable contains quotes, e.g. when using
ccache (make CC="ccache <compiler>"), this script always
fails, so CONFIG_RELR is never enabled, even when the
toolchain supports this feature. Removing the /dev/null
redirect and invoking the script manually shows the issue:
$ CC='/usr/bin/ccache clang' ./scripts/tools-support-relr.sh
./scripts/tools-support-relr.sh: 7: ./scripts/tools-support-relr.sh: /usr/bin/ccache clang: not found
Fix this by un-quoting the variables.
Before:
$ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \
NM=llvm-nm OBJCOPY=llvm-objcopy defconfig
$ grep RELR .config
CONFIG_ARCH_HAS_RELR=y
With this change:
$ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \
NM=llvm-nm OBJCOPY=llvm-objcopy defconfig
$ grep RELR .config
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_ARCH_HAS_RELR=y
CONFIG_RELR=y
Fixes: 5cf896fb6b ("arm64: Add support for relocating the kernel with RELR relocations")
Reported-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/769
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
GNU Make manual says:
$?
The names of all the prerequisites that are newer than the target,
with spaces between them.
To reflect this, rename any-prereq to newer-prereqs, which is clearer
and more intuitive.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The incremental build of Linux kernel is pretty slow when lots of
objects are compiled. The rebuild of allmodconfig may take a few
minutes even when none of the objects needs to be rebuilt.
The time-consuming part in the incremental build is the evaluation of
if_changed* macros since they are used in the recipes to compile C and
assembly source files into objects.
I notice the following code in if_changed* is expensive:
$(filter-out $(PHONY) $(wildcard $^),$^)
In the incremental build, every object has its .*.cmd file, which
contains the auto-generated list of included headers. So, $^ are
expanded into the long list of the source file + included headers,
and $(wildcard $^) checks whether they exist.
It may not be clear why this check exists there.
Here is the record of my research.
[1] The first code addition into Kbuild
This code dates back to 2002. It is the pre-git era. So, I copy-pasted
it from the historical git tree.
| commit 4a6db0791528c220655b063cf13fefc8470dbfee (HEAD)
| Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
| Date: Mon Jun 17 00:22:37 2002 -0500
|
| kbuild: Handle removed headers
|
| New and old way to handle dependencies would choke when a file
| #include'd by other files was removed, since the dependency on it was
| still recorded, but since it was gone, make has no idea what to do about
| it (and would complain with "No rule to make <file> ...")
|
| We now add targets for all the previously included files, so make will
| just ignore them if they disappear.
|
| diff --git a/Rules.make b/Rules.make
| index 6ef827d3df39..7db5301ea7db 100644
| --- a/Rules.make
| +++ b/Rules.make
| @@ -446,7 +446,7 @@ if_changed = $(if $(strip $? \
| # execute the command and also postprocess generated .d dependencies
| # file
|
| -if_changed_dep = $(if $(strip $? \
| +if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
| $(filter-out $(cmd_$(1)),$(cmd_$@))\
| $(filter-out $(cmd_$@),$(cmd_$(1)))),\
| @set -e; \
| diff --git a/scripts/fixdep.c b/scripts/fixdep.c
| index b5d7bee8efc7..db45bd1888c0 100644
| --- a/scripts/fixdep.c
| +++ b/scripts/fixdep.c
| @@ -292,7 +292,7 @@ void parse_dep_file(void *map, size_t len)
| exit(1);
| }
| memcpy(s, m, p-m); s[p-m] = 0;
| - printf("%s: \\\n", target);
| + printf("deps_%s := \\\n", target);
| m = p+1;
|
| clear_config();
| @@ -314,7 +314,8 @@ void parse_dep_file(void *map, size_t len)
| }
| m = p + 1;
| }
| - printf("\n");
| + printf("\n%s: $(deps_%s)\n\n", target, target);
| + printf("$(deps_%s):\n", target);
| }
|
| void print_deps(void)
The "No rule to make <file> ..." error can be solved by passing -MP to
the compiler, but I think the detection of header removal is a good
feature. When a header is removed, all source files that previously
included it should be re-compiled. This makes sure we has correctly
got rid of #include directives of it.
This is also related with the behavior of $?. The GNU Make manual says:
$?
The names of all the prerequisites that are newer than the target,
with spaces between them.
This does not explain whether a non-existent prerequisite is considered
to be newer than the target.
At this point of time, GNU Make 3.7x was used, where the $? did not
include non-existent prerequisites. Therefore,
$(filter-out FORCE $(wildcard $^),$^)
was useful to detect the header removal, and to rebuild the related
objects if it is the case.
[2] Change of $? behavior
Later, the behavior of $? was changed (fixed) to include prerequisites
that did not exist.
First, GNU Make commit 64e16d6c00a5 ("Various changes getting ready for
the release of 3.81.") changed it, but in the release test of 3.81, it
turned out to break the kernel build.
See these:
- http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html
- https://savannah.gnu.org/bugs/?16002
- https://savannah.gnu.org/bugs/?16051
Then, GNU Make commit 6d8d9b74d9c5 ("Numerous updates to tests for
issues found on Cygwin and Windows.") reverted it for the 3.81 release
to give Linux kernel time to adjust to the new behavior.
After the 3.81 release, GNU Make commit 7595f38f62af ("Fixed a number
of documentation bugs, plus some build/install issues:") re-added it.
[3] Adjustment to the new $? behavior on Kbuild side
Meanwhile, the kernel build was changed by commit 4f1933620f ("kbuild:
change kbuild to not rely on incorrect GNU make behavior") to adjust to
the new $? behavior.
[4] GNU Make 3.82 released in 2010
GNU Make 3.82 was the first release that integrated the correct $?
behavior. At this point, Kbuild dealt with GNU Make versions with
different $? behaviors.
3.81 or older:
$? does not contain any non-existent prerequisite.
$(filter-out $(PHONY) $(wildcard $^),$^) was useful to detect
removed include headers.
3.82 or newer:
$? contains non-existent prerequisites. When a header is removed,
it appears in $?. $(filter-out $(PHONY) $(wildcard $^),$^) became
a redundant check.
With the correct $? behavior, we could have dropped the expensive
check for 3.82 or later, but we did not. (Maybe nobody noticed this
optimization.)
[5] The .SECONDARY special target trips up $?
Some time later, I noticed $? did not work as expected under some
circumstances. As above, $? should contain non-existent prerequisites,
but the ones specified as SECONDARY do not appear in $?.
I asked this in GNU Make ML, and it seems a bug:
https://lists.gnu.org/archive/html/bug-make/2019-01/msg00001.html
Since commit 8e9b61b293 ("kbuild: move .SECONDARY special target to
Kbuild.include"), all files, including headers listed in .*.cmd files,
are treated as secondary.
So, we are back into the incorrect $? behavior.
If we Kbuild want to react to the header removal, we need to keep
$(filter-out $(PHONY) $(wildcard $^),$^) but this makes the rebuild
so slow.
[Summary]
- I believe noticing the header removal and recompiling related objects
is a nice feature for the build system.
- If $? worked correctly, $(filter-out $(PHONY),$?) would be enough
to detect the header removal.
- Currently, $? does not work correctly when used with .SECONDARY,
and Kbuild is hit by this bug.
- I filed a bug report for this, but not fixed yet as of writing.
- Currently, the header removal is detected by the following expensive
code:
$(filter-out $(PHONY) $(wildcard $^),$^)
- I do not want to revert commit 8e9b61b293 ("kbuild: move
.SECONDARY special target to Kbuild.include"). Specifying
.SECONDARY globally is clean, and it matches to the Kbuild policy.
This commit proactively removes the expensive check since it makes the
incremental build faster. A downside is Kbuild will no longer be able
to notice the header removal.
You can confirm it by the full-build followed by a header removal, and
then re-build.
$ make defconfig all
[ full build ]
$ rm include/linux/device.h
$ make
CALL scripts/checksyscalls.sh
CALL scripts/atomic/check-atomics.sh
DESCEND objtool
CHK include/generated/compile.h
Kernel: arch/x86/boot/bzImage is ready (#11)
Building modules, stage 2.
MODPOST 12 modules
Previously, Kbuild noticed a missing header and emits a build error.
Now, Kbuild is fine with it. This is an unusual corner-case, not a big
deal. Once the $? bug is fixed in GNU Make, everything will work fine.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The local variable, ns_entry, is unneeded.
While I was here, I also cleaned up the comparison with NULL or 0.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
scripts/nsdeps is written to take care of only in-tree modules.
Perhaps, this is not a bug, but just a design. At least,
Documentation/core-api/symbol-namespaces.rst focuses on in-tree modules.
Having said that, some people already tried nsdeps for external modules.
So, it would be nice to support it.
Reported-by: Steve French <smfrench@gmail.com>
Reported-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
The modpost, with the -d option given, generates per-module .ns_deps
files.
Kbuild generates per-module .mod files to carry module information.
This is convenient because Make handles multiple jobs in parallel
when the -j option is given.
On the other hand, the modpost always runs as a single thread.
I do not see a strong reason to produce separate .ns_deps files.
This commit changes the modpost to generate just one file,
modules.nsdeps, each line of which has the following format:
<module_name>: <list of missing namespaces>
Please note it contains *missing* namespaces instead of required ones.
So, modules.nsdeps is empty if the namespace dependency is all good.
This will work more efficiently because spatch will no longer process
already imported namespaces. I removed the '(if needed)' from the
nsdeps log since spatch is invoked only when needed.
This also solves the stale .ns_deps problem reported by Jessica Yu:
https://lkml.org/lkml/2019/10/28/467
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
'make nsdeps' invokes the modpost three times at most; before linking
vmlinux, before building modules, and finally for generating .ns_deps
files. Running the modpost again and again is not efficient.
The last two can be unified. When the -d option is given, the modpost
still does the usual job, and in addition, generates .ns_deps files.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
If ncurses is installed, but at a non-default location, the previous
error message was not helpful in resolving the situation. Now it will
suggest that pkg-config might need to be installed in addition to
ncurses.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
make listnewconfig will list the individual options that need to be set.
This is useful but there's no easy way to get the help text associated
with the options at the same time. Introduce a new targe
'make helpnewconfig' which lists the full help text of all the
new options as well. This makes it easier to automatically generate
changes that are easy for humans to review. This command also adds
markers between each option for easier parsing.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add a 'dir-pkg' target which just creates the same directory structures
as in tar-pkg, but doesn't package anything.
Useful when the user wants to copy the kernel tree on a machine using
ssh, rsync or whatever.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Some "make help" text lines extend beyond 80 characters.
Wrap them before an opening parenthesis, or before 80 characters.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit 394053f4a4 ("kbuild: make single targets work more
correctly"), building single targets is really slow.
Speed it up by not descending into unrelated directories.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
KBUILD_SINGLE_TARGETS does not need to contain all the targets.
Change it to keep track the targets only from the current directory
and its subdirectories.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit 040fcc819a ("kbuild: improved modversioning support for
external modules"), the external module build reads Module.symvers in
the directory of the module itself, then dumps symbols back into it.
It accumulates stale symbols in the file when you build an external
module incrementally.
The idea behind it was, as the commit log explained, you can copy
Modules.symvers from one module to another when you need to pass symbol
information between two modules. However, the manual copy of the file
sounds questionable to me, and containing stale symbols is a downside.
Some time later, commit 0d96fb20b7 ("kbuild: Add new Kbuild variable
KBUILD_EXTRA_SYMBOLS") introduced a saner approach.
So, this commit removes the former one. Going forward, the external
module build dumps symbols into Module.symvers to be carried via
KBUILD_EXTRA_SYMBOLS, but never reads it automatically.
With the -I option removed, there is no one to set the external_module
flag unless KBUILD_EXTRA_SYMBOLS is passed. Now the -i option does it
instead.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When building external modules, $(objtree)/Module.symvers is scanned
for symbol information of vmlinux and in-tree modules.
Additionally, vmlinux is parsed if it exists in $(objtree)/.
This is totally redundant since all the necessary information is
contained in $(objtree)/Module.symvers.
Do not parse vmlinux at all for external module builds. This makes
sense because vmlinux is deleted by 'make clean'.
'make clean' leaves all the build artifacts for building external
modules. vmlinux is unneeded for that.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The comment line "When building external modules ..." explains
the same thing as "Include the module's Makefile ..." a few lines
below.
The comment "they may be used when building the .mod.c file" is no
longer true; .mod.c file is compiled in scripts/Makefile.modfinal
since commit 9b9a3f20cb ("kbuild: split final module linking out
into Makefile.modfinal"). I still keep the code in case $(obj) or
$(src) is used in the external module Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
util.c exists both in scripts/kconfig/ and scripts/kconfig/lxdialog.
Prior to commit 54b8ae66ae ("kbuild: change *FLAGS_<basetarget>.o
to take the path relative to $(obj)"), Kbuild could not pass different
flags to source files with the same basename. Now that this issue
was solved, you can split util.c out of parser.y and compile them
independently of each other.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This tool is only used by drivers/video/logo/Makefile. No reason to
keep it in scripts/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
One conflict in the BPF samples Makefile, some fixes in 'net' whilst
we were converting over to Makefile.target rules in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix `make nsdeps` for modules composed of multiple source files. Since
$mod_source_files is not in quotes in the call to generate_deps_for_ns(), not
all the source files for a module were being passed to spatch.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9XXQ
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fix from Jessica Yu:
"Fix `make nsdeps` for modules composed of multiple source files.
Since $mod_source_files was not in quotes in the call to
generate_deps_for_ns(), not all the source files for a module were
being passed to spatch"
* tag 'modules-for-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
scripts/nsdeps: make sure to pass all module source files to spatch
On Arch Linux, latexmk is installed in the texlive-core package.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Currently, when kernel-doc encounters a macro with a named variable
argument[1], such as this:
#define hlist_for_each_entry_rcu(pos, head, member, cond...)
... it expects the variable argument to be documented as `cond...`,
rather than `cond`. This is semantically wrong, because the name (as
used in the macro body) is actually `cond`.
With this patch, kernel-doc will accept the name without dots (`cond`
in the example above) in doc comments, and warn if the name with dots
(`cond...`) is used and verbose mode[2] is enabled.
The support for the `cond...` syntax can be removed later, when the
documentation of all such macros has been switched to the new syntax.
Testing this patch on top of v5.4-rc6, `make htmldocs` shows a few
changes in log output and HTML output:
1) The following warnings[3] are eliminated:
./include/linux/rculist.h:374: warning:
Excess function parameter 'cond' description in 'list_for_each_entry_rcu'
./include/linux/rculist.h:651: warning:
Excess function parameter 'cond' description in 'hlist_for_each_entry_rcu'
2) For list_for_each_entry_rcu and hlist_for_each_entry_rcu, the
correct description is shown
3) Named variable arguments are shown without dots
[1]: https://gcc.gnu.org/onlinedocs/cpp/Variadic-Macros.html
[2]: scripts/kernel-doc -v
[3]: See also https://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git/commit/?h=dev&id=5bc4bc0d6153617eabde275285b7b5a8137fdf3c
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
gcc's -freorder-blocks-and-partition option makes it group frequently
and infrequently used code in .text.hot and .text.unlikely sections
respectively. At least when building modules on s390, this option is
used by default.
gdb assumes that all code is located in .text section, and that .text
section is located at module load address. With such modules this is no
longer the case: there is code in .text.hot and .text.unlikely, and
either of them might precede .text.
Fix by explicitly telling gdb the addresses of code sections.
It might be tempting to do this for all sections, not only the ones in
the white list. Unfortunately, gdb appears to have an issue, when
telling it about e.g. loadable .note.gnu.build-id section causes it to
think that non-loadable .note.Linux section is loaded at address 0,
which in turn causes NULL pointers to be resolved to bogus symbols. So
keep using the white list approach for the time being.
Link: http://lkml.kernel.org/r/20191028152734.13065-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The nsdeps script passes a list of the module source files to
generate_deps_for_ns() as a space delimited string named $mod_source_files,
which then passes it to spatch. But since $mod_source_files is not encased
in quotes, each source file in that string is treated as a separate shell
function argument (as $2, $3, $4, etc.). However, the spatch invocation
only refers to $2, so only the first file out of $mod_source_files is
processed by spatch.
This causes problems (namely, the MODULE_IMPORT_NS() statement doesn't
get inserted) when a module is composed of many source files and the
"main" module file containing the MODULE_LICENSE() statement is not the
first file listed in $mod_source_files. Fix this by encasing
$mod_source_files in quotes so that the entirety of the string is
treated as a single argument and can be referred to as $2.
In addition, put quotes in the variable assignment of mod_source_files
to prevent any shell interpretation and field splitting.
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Using Makefile's wildcard with absolute path to detect
the presence of libyaml results in false-positive
detection when cross-compiling e.g. in yocto environment.
The latter results in build error:
| scripts/dtc/yamltree.o: In function `yaml_propval_int':
| yamltree.c: undefined reference to `yaml_sequence_start_event_initialize'
| yamltree.c: undefined reference to `yaml_emitter_emit'
| yamltree.c: undefined reference to `yaml_scalar_event_initialize'
...
Use pkg-config to locate libyaml to address this scenario.
Signed-off-by: Pavel Modilaynen <pavel.modilaynen@axis.com>
[robh: silence stderr]
Signed-off-by: Rob Herring <robh@kernel.org>
Add new -c/--color options, to enhance the diff output with color, and
improve the user's experience.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The only slightly tricky merge conflict was the netdevsim because the
mutex locking fix overlapped a lot of driver reload reorganization.
The rest were (relatively) trivial in nature.
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl2su/AeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvm4H/1jkheCrvB/GJS69
wd18vizAg+eFmNCzxlGVhpQTKGymNRy+g6clnoli3cNJ3pSVKcYgVyB3oXaONIhp
g/ANudnBjTdjqYgJzfLij5AGecrGwDpF3YL0kuKrCB63s2I/HwQGYy/aPrYY8emy
gAYdaf1DGRu5/DIIB6soTo/TnpKoAyTE+XY5MaPSug++t/Flov19tlU40IZxXW94
bjTXbm0yklrsIx+LL5mYYGGnygSTCF66JjFg1qhDCBQaS2MZ21h1ZgaOtGZTwZcc
WgEiqLC5S1Iyj96zir1t78RcVQ4RzgvDbhUOgIqUFsYAO2wOicvxyFE3Hj8rPOKd
uGgVPRM=
=xgZa
-----END PGP SIGNATURE-----
Merge tag 'v5.4-rc4' into docs-next
I need to pick up the independent changes made to
Documentation/core-api/memory-allocation.rst to be able to merge further
work without creating a total mess.
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-10-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 52 non-merge commits during the last 11 day(s) which contain
a total of 65 files changed, 2604 insertions(+), 1100 deletions(-).
The main changes are:
1) Revolutionize BPF tracing by using in-kernel BTF to type check BPF
assembly code. The work here teaches BPF verifier to recognize
kfree_skb()'s first argument as 'struct sk_buff *' in tracepoints
such that verifier allows direct use of bpf_skb_event_output() helper
used in tc BPF et al (w/o probing memory access) that dumps skb data
into perf ring buffer. Also add direct loads to probe memory in order
to speed up/replace bpf_probe_read() calls, from Alexei Starovoitov.
2) Big batch of changes to improve libbpf and BPF kselftests. Besides
others: generalization of libbpf's CO-RE relocation support to now
also include field existence relocations, revamp the BPF kselftest
Makefile to add test runner concept allowing to exercise various
ways to build BPF programs, and teach bpf_object__open() and friends
to automatically derive BPF program type/expected attach type from
section names to ease their use, from Andrii Nakryiko.
3) Fix deadlock in stackmap's build-id lookup on rq_lock(), from Song Liu.
4) Allow to read BTF as raw data from bpftool. Most notable use case
is to dump /sys/kernel/btf/vmlinux through this, from Jiri Olsa.
5) Use bpf_redirect_map() helper in libbpf's AF_XDP helper prog which
manages to improve "rx_drop" performance by ~4%., from Björn Töpel.
6) Fix to restore the flow dissector after reattach BPF test and also
fix error handling in bpf_helper_defs.h generation, from Jakub Sitnicki.
7) Improve verifier's BTF ctx access for use outside of raw_tp, from
Martin KaFai Lau.
8) Improve documentation for AF_XDP with new sections and to reflect
latest features, from Magnus Karlsson.
9) Add back 'version' section parsing to libbpf for old kernels, from
John Fastabend.
10) Fix strncat bounds error in libbpf's libbpf_prog_type_by_name(),
from KP Singh.
11) Turn on -mattr=+alu32 in LLVM by default for BPF kselftests in order
to improve insn coverage for built BPF progs, from Yonghong Song.
12) Misc minor cleanups and fixes, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Revert __ksymtab_$namespace.$symbol naming scheme back to
__ksymtab_$symbol, as it was causing issues with depmod. Instead,
have modpost extract a symbol's namespace from __kstrtabns and
__ksymtab_strings.
- Fix `make nsdeps` for out of tree kernel builds (make O=...) caused by
unescaped '/'. Use a different sed delimiter to avoid this problem.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ge3Z
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fixes from Jessica Yu:
- Revert __ksymtab_$namespace.$symbol naming scheme back to
__ksymtab_$symbol, as it was causing issues with depmod.
Instead, have modpost extract a symbol's namespace from __kstrtabns
and __ksymtab_strings.
- Fix `make nsdeps` for out of tree kernel builds (make O=...) caused
by unescaped '/'.
Use a different sed delimiter to avoid this problem.
* tag 'modules-for-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
scripts/nsdeps: use alternative sed delimiter
symbol namespaces: revert to previous __ksymtab name scheme
modpost: make updating the symbol namespace explicit
modpost: delegate updating namespaces to separate function
When doing an out of tree build with O=, the nsdeps script constructs
the absolute pathname of the module source file so that it can insert
MODULE_IMPORT_NS statements in the right place. However, ${srctree}
contains an unescaped path to the source tree, which, when used in a sed
substitution, makes sed complain:
++ sed 's/[^ ]* *//home/jeyu/jeyu-linux\/&/g'
sed: -e expression #1, char 12: unknown option to `s'
The sed substitution command 's' ends prematurely with the forward
slashes in the pathname, and sed errors out when it encounters the 'h',
which is an invalid sed substitution option. To avoid escaping forward
slashes ${srctree}, we can use '|' as an alternative delimiter for
sed instead to avoid this error.
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Don't generate a broken bpf_helper_defs.h header if the helper script needs
updating because it doesn't recognize a newly added type. Instead print an
error that explains why the build is failing, clean up the partially
generated header and stop.
v1->v2:
- Switched from temporary file to .DELETE_ON_ERROR.
Fixes: 456a513bb5 ("scripts/bpf: Emit an #error directive known types list needs updating")
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191020112344.19395-1-jakub@cloudflare.com
- fix a bashism of setlocalversion
- do not use the too new --sort option of tar
-----BEGIN PGP SIGNATURE-----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=KNWF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild fixes from Masahiro Yamada:
- fix a bashism of setlocalversion
- do not use the too new --sort option of tar
* tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: substituting --sort in archive creation
scripts: setlocalversion: fix a bashism
kbuild: update comment about KBUILD_ALLDIRS
Currently lx-symbols assumes that module text is always located at
module->core_layout->base, but s390 uses the following layout:
+------+ <- module->core_layout->base
| GOT |
+------+ <- module->core_layout->base + module->arch->plt_offset
| PLT |
+------+ <- module->core_layout->base + module->arch->plt_offset +
| TEXT | module->arch->plt_size
+------+
Therefore, when trying to debug modules on s390, all the symbol
addresses are skewed by plt_offset + plt_size.
Fix by adding plt_offset + plt_size to module_addr in
load_module_symbols().
Link: http://lkml.kernel.org/r/20191017085917.81791-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_PRINTK_CALLER is set, struct printk_log contains an
additional member caller_id. This affects the offset of the log text.
Account for this by using the type information from gdb to determine all
the offsets instead of using hardcoded values.
This fixes following error:
(gdb) lx-dmesg
Python Exception <class 'ValueError'> embedded null character:
Error occurred in Python command: embedded null character
The read_u* utility functions now take an offset argument to make them
easier to use.
Link: http://lkml.kernel.org/r/20191011142500.2339-1-joel.colledge@linbit.com
Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The introduction of Symbol Namespaces changed the naming schema of the
__ksymtab entries from __kysmtab__symbol to __ksymtab_NAMESPACE.symbol.
That caused some breakages in tools that depend on the name layout in
either the binaries(vmlinux,*.ko) or in System.map. E.g. kmod's depmod
would not be able to read System.map without a patch to support symbol
namespaces. A warning reported by depmod for namespaced symbols would
look like
depmod: WARNING: [...]/uas.ko needs unknown symbol usb_stor_adjust_quirks
In order to address this issue, revert to the original naming scheme and
rather read the __kstrtabns_<symbol> entries and their corresponding
values from __ksymtab_strings to update the namespace values for
symbols. After having read all symbols and handled them in
handle_modversions(), the symbols are created. In a second pass, read
the __kstrtabns_ entries and update the namespaces accordingly.
Fixes: 8651ec01da ("module: add support for symbol namespaces.")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Setting the symbol namespace of a symbol within sym_add_exported feels
displaced and lead to issues in the current implementation of symbol
namespaces. This patch makes updating the namespace an explicit call to
decouple it from adding a symbol to the export list.
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Let the function 'sym_update_namespace' take care of updating the
namespace for a symbol. While this currently only replaces one single
location where namespaces are updated, in a following patch, this
function will get more call sites.
The function signature is intentionally close to sym_update_crc and
taking the name by char* seems like unnecessary work as the symbol has
to be looked up again. In a later patch of this series, this concern
will be addressed.
This function ensures that symbol::namespace is either NULL or has a
valid non-empty value. Previously, the empty string was considered 'no
namespace' as well and this lead to confusion.
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
While it is useful for new drivers to use devm_platform_ioremap_resource,
this script is currently used to spam maintainers, often updating very
old drivers. The net benefit is the removal of 2 lines of code in the
driver but the review load for the maintainers is huge. As of now, more
that 560 patches have been sent, some of them obviously broken, as in:
https://lore.kernel.org/lkml/9bbcce19c777583815c92ce3c2ff2586@www.loen.fr/
Remove the script to reduce the spam.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make the compiler report a clear error when bpf_helpers_doc.py needs
updating rather than rely on the fact that Clang fails to compile
English:
../../../lib/bpf/bpf_helper_defs.h:2707:1: error: unknown type name 'Unrecognized'
Unrecognized type 'struct bpf_inet_lookup', please add it to known types!
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191016085811.11700-1-jakub@cloudflare.com
Fix bashism reported by checkbashisms by using only one '=':
possible bashism in scripts/setlocalversion line 96 (should be 'b = a'):
if [ "`hg log -r . --template '{latesttagdistance}'`" == "1" ]; then
Fixes: 38b3439d84 ("setlocalversion: update mercurial tag parsing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Crowe <mcrowe@zipitwireless.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-10-14
The following pull-request contains BPF updates for your *net-next* tree.
12 days of development and
85 files changed, 1889 insertions(+), 1020 deletions(-)
The main changes are:
1) auto-generation of bpf_helper_defs.h, from Andrii.
2) split of bpf_helpers.h into bpf_{helpers, helper_defs, endian, tracing}.h
and move into libbpf, from Andrii.
3) Track contents of read-only maps as scalars in the verifier, from Andrii.
4) small x86 JIT optimization, from Daniel.
5) cross compilation support, from Ivan.
6) bpf flow_dissector enhancements, from Jakub and Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Removed locked down from tracefs itself and moved it to the trace
directory. Having the open functions there do the lockdown checks.
- Fixed a few races with opening an instance file and the instance being
deleted (Discovered during the locked down updates). Kept separate
from the clean up code such that they can be backported to stable
easier.
- Cleaned up and consolidated the checks done when opening a trace
file, as there were multiple checks that need to be done, and it
did not make sense having them done in each open instance.
- Fixed a regression in the record mcount code.
- Small hw_lat detector tracer fixes.
- A trace_pipe read fix due to not initializing trace_seq.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXaNhphQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quDIAP4v08ARNdIh+r+c4AOBm3xsOuE/d9GB
I56ydnskm+x2JQD6Ap9ivXe9yDBIErFeHNtCoq7pM8YDI4YoYIB30N0GfwM=
=7oAu
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few tracing fixes:
- Remove lockdown from tracefs itself and moved it to the trace
directory. Have the open functions there do the lockdown checks.
- Fix a few races with opening an instance file and the instance
being deleted (Discovered during the lockdown updates). Kept
separate from the clean up code such that they can be backported to
stable easier.
- Clean up and consolidated the checks done when opening a trace
file, as there were multiple checks that need to be done, and it
did not make sense having them done in each open instance.
- Fix a regression in the record mcount code.
- Small hw_lat detector tracer fixes.
- A trace_pipe read fix due to not initializing trace_seq"
* tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Initialize iter->seq after zeroing in tracing_read_pipe()
tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency
tracing/hwlat: Report total time spent in all NMIs during the sample
recordmcount: Fix nop_mcount() function
tracing: Do not create tracefs files if tracefs lockdown is in effect
tracing: Add locked_down checks to the open calls of files created for tracefs
tracing: Add tracing_check_open_get_tr()
tracing: Have trace events system open call tracing_open_generic_tr()
tracing: Get trace_array reference for available_tracers files
ftrace: Get a reference counter for the trace_array on filter files
tracefs: Revert ccbd54ff54 ("tracefs: Restrict tracefs when the kernel is locked down")
The removal of the longjmp code in recordmcount.c mistakenly made the return
of make_nop() being negative an exit of nop_mcount(). It should not exit the
routine, but instead just not process that part of the code. By exiting with
an error code, it would cause the update of recordmcount to fail some files
which would fail the build if ftrace function tracing was enabled.
Link: http://lkml.kernel.org/r/20191009110538.5909fec6@gandalf.local.home
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 3f1df12019 ("recordmcount: Rewrite error/success handling")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
DT bindings are moving to using a json-schema based schema format
instead of freeform text. Add a checkpatch.pl check to encourage using
the schema for new bindings. It's not yet a requirement, but is
progressively being required by some maintainers.
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Rob Herring <robh@kernel.org>
- Fix broken external module builds due to a modpost bug in read_dump(),
where the namespace was not being strdup'd and sym->namespace would be
set to bogus data.
- Various namespace-related kbuild fixes and cleanups thanks to
Masahiro Yamada.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ebck
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module fixes from Jessica Yu:
"Code cleanups and kbuild/namespace related fixups from Masahiro.
Most importantly, it fixes a namespace-related modpost issue for
external module builds
- Fix broken external module builds due to a modpost bug in
read_dump(), where the namespace was not being strdup'd and
sym->namespace would be set to bogus data.
- Various namespace-related kbuild fixes and cleanups thanks to
Masahiro Yamada"
* tag 'modules-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
doc: move namespaces.rst from kbuild/ to core-api/
nsdeps: make generated patches independent of locale
nsdeps: fix hashbang of scripts/nsdeps
kbuild: fix build error of 'make nsdeps' in clean tree
module: rename __kstrtab_ns_* to __kstrtabns_* to avoid symbol conflict
modpost: fix broken sym->namespace for external module builds
module: swap the order of symbol.namespace
scripts: add_namespace: Fix coccicheck failed
Add support for %pfw conversion specifier (with "f" and "P" modifiers) to
support printing full path of the node, including its name ("f") and only
the node's name ("P") in the printk family of functions. The two flags
have equivalent functionality to existing %pOF with the same two modifiers
("f" and "P") on OF based systems. The ability to do the same on ACPI
based systems is added by this patch.
On ACPI based systems the resulting strings look like
\_SB.PCI0.CIO2.port@1.endpoint@0
where the nodes are separated by a dot (".") and the first three are
ACPI device nodes and the latter two ACPI data nodes.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
