Commit Graph

2278 Commits

Author SHA1 Message Date
Nishanth Menon
38a7a73e8e rtc: ds1307: Use irq when available for wakeup-source device
With commit 8bc2a40730 ("rtc: ds1307: add support for the
DT property 'wakeup-source'") we lost the ability for rtc irq
functionality for devices that are actually hooked on a real IRQ
line and have capability to wakeup as well. This is not an expected
behavior. So, instead of just not requesting IRQ, skip the IRQ
requirement only if interrupts are not defined for the device.

Fixes: 8bc2a40730 ("rtc: ds1307: add support for the DT property 'wakeup-source'")
Reported-by: Tony Lindgren <tony@atomide.com>
Cc: Michael Lange <linuxstuff@milaw.biz>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-21 23:21:00 +02:00
Zhuang Yuyao
9a3dce62cc rtc: ds1307: ds3231 temperature s16 overflow
while retrieving temperature from ds3231, the result may be overflow
since s16 is too small for a multiplication with 250.

ie. if temp_buf[0] == 0x2d, the result (s16 temp) will be negative.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Tested-by: Michael Tatarinov <kukabu@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-21 23:20:59 +02:00
Linus Torvalds
8407ef4685 RTC for 4.6 #2
Drivers:
  - abx80x: handle both XT and RC oscillators, XT failure bit and autocalibration
  - m41t80: avoid out of range year values
  - rv8803: workaround an i2c HW issue
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJW9JdpAAoJEKbNnwlvZCyz9hYP/RU/8fJtdO2veoY+xLVta7UV
 mJahSrMn7CMkZeVh7vy/T8tIJDNB+G4TqkG6V8kT41yltzTZszn/Qm/t6vrEcwY3
 GXj11NtIiOeo6UgGeEKj0feM9Imy/OtHvCfXc7XmTV78f0DYE5MvH+7rTXmFzNm0
 qHE+aGPfp2CGYS8HhDYwedvXo9qphSCfbU3akm2PSdFfOkoCuIBndJgLkKsqdKXY
 St9hN0Z7xo3FayxtTbELftnW1xkvgsJiGcU19b3Uo89V3NS1L+5eJkhI7cx/kQxz
 bMlBBKkvpdmRwy2ng42NGipLXEXwTTOqx4ZlhKLjwhGAF1m4R9ThrCrrXrBT01LM
 8TwO5HNqUEViQYXMSK95UF2F5ldE5S+kfYUjopdoV1N6/04Uz+X03o9+zMAJq4JH
 ZWjcLIYXb1lvmt8KzUD847O69001NtWC0zVgHoQJ3CldguyGX11BYzkRCxRn/u9y
 OWEivF8K0hXYw0Dcmnls6/lrDP1xQc7s6BiFg00UTEjGAmlZVR3eSNBxCXXUneyR
 nsv1dlvB9+mcVFFpEQI/MFFNdoBBx3KLRIE+pFJIadQ4yaWkUhrOJpTW4Y646QAj
 1VMDV5Z6961sMqVkyqNMZqaqnVgrZY0DZWS9PMzYlNnrDSIXu3svu78xq+foBy0+
 OuOHjLcIIKxFSRysMZu7
 =PMVI
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull more RTC updates from Alexandre Belloni:
 "A second pull request for v4.6 with a few fixesi before -rc1.  The new
  features for abx80x actually make the RTC behave correctly.

  Drivers:
   - abx80x: handle both XT and RC oscillators, XT failure bit and
     autocalibration
   - m41t80: avoid out of range year values
   - rv8803: workaround an i2c HW issue"

* tag 'rtc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: abx80x: handle the oscillator failure bit
  rtc: abx80x: handle autocalibration
  rtc: rv8803: workaround i2c HW issue
  rtc: mcp795: add devicetree support
  rtc: asm9260: remove incorrect __init/__exit annotations
  rtc: m41t80: avoid out of range year values
  rtc: s3c: Don't print an error on probe deferral
  rtc: rv3029: stop mentioning rv3029c2
2016-03-24 22:49:08 -07:00
Mylène Josserand
ee08774424 rtc: abx80x: handle the oscillator failure bit
Handle the Oscillator Failure ('OF') bit from Oscillator Status register
(0x1D). This bit is cleared on set_time function and is read each time the
date/time is read, but only in case of XT Oscillator selection.
In RC mode, this bit is always set.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-25 02:41:13 +01:00
Mylène Josserand
59a8383adb rtc: abx80x: handle autocalibration
The autocalibration is separated in two bits to set in Oscillator
Control register (0x1c) :
 - OSEL bit to select the oscillator type (XT or RC).
 - ACAL bit to select the autocalibration type.

These functionnalities are exported in sysfs entries : "oscillator"
and "autocalibration". Respectively, the values are "xtal" for XT
oscillator and "rc" for RC oscillator and 0 to disable the
autocalibration cycle, 512 for a 512 seconds autocalibration cycle
and 1024 for a cycle of 1024 seconds.

Examples :
Set to XT Oscillator
echo xtal > /sys/class/rtc/rtc0/device/oscillator
Activate an autocalibration every 512 seconds
echo 512 > /sys/class/rtc/rtc0/device/autocalibration

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-25 02:41:13 +01:00
Alexandre Belloni
85062c9b99 rtc: rv8803: workaround i2c HW issue
The rv8803 has a 60µs window where it will not answer on the i2c bus.
It also means there will be no ack for the communication. Make sure
communication is tried multiple times when this happens (the i2c subsystem
mandates -ENXIO is that case but the number of retries is host specific).
The critical parts are the probe function and the alarm callback so make
sure we handle the failure there.

Cc: stable@vger.kernel.org # v4.4
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-25 02:38:59 +01:00
Emil Bartczak
7f8a58925b rtc: mcp795: add devicetree support
Add device tree support to the rtc-mcp795 driver.

Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-21 22:55:29 +01:00
Arnd Bergmann
15c6ea6f81 rtc: asm9260: remove incorrect __init/__exit annotations
The probe and remove callbacks of the platform driver are marked __init
and __exit, respectively. However, this is not a correct way to annotate
them, as it will result in those sections to be discarded at link time
or after boot, while we can actually call them again based on manual
unbinding, or deferred probing.

Kbuild warns about the problem:

WARNING: drivers/rtc/rtc-asm9260.o(.data+0x0): Section mismatch in reference from the variable asm9260_rtc_driver to the function .init.text:asm9260_rtc_probe()

This removes the annotations, so we no longer branch into missing
code and avoid the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 125e550fd2 ("rtc: add Alphascale asm9260 driver")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-19 00:02:55 +01:00
Stefan Christ
bcebd81d00 rtc: m41t80: avoid out of range year values
Avoid saving an out of range year value to the RTC. Reading that value
from the RTC again returns a totally wrong time value. For Example

    $ timedatectl set-ntp no
    $ timedatectl set-time "1990-01-01 12:12:00"
    # Reboot
    rtc-m41t80 0-0068: setting system clock to 2090-01-01 12:12:35 UTC (3786955955)

Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-19 00:00:59 +01:00
Javier Martinez Canillas
ae6e00b4c0 rtc: s3c: Don't print an error on probe deferral
The clock and source clock looked up by the driver may not be available
just because the clock controller driver was not probed yet so printing
an error in this case is not correct and only adds confusion to users.

However, knowing that a driver's probe was deferred may be useful so it
can be printed as a debug information.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-19 00:00:12 +01:00
Linus Torvalds
49dc2b7173 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  drivers/rtc: broken link fix
  drm/i915 Fix typos in i915_gem_fence.c
  Docs: fix missing word in REPORTING-BUGS
  lib+mm: fix few spelling mistakes
  MAINTAINERS: add git URL for APM driver
  treewide: Fix typo in printk
2016-03-17 21:38:27 -07:00
Alexandre Belloni
399221ccf4 rtc: rv3029: stop mentioning rv3029c2
rv3029c2 is actually rv3029. c2 denotes an option.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-15 00:29:33 +01:00
Akinobu Mita
cee2cc2155 rtc: pcf2127: add pcf2129 device id
There are only a few differences between PCF2127 and PCF2129 (PCF2127
has 512 bytes of general purpose SRAM and count-down timer).

The rtc-pcf2127 driver currently doesn't use the PCF2127 specific
functionality and Kconfig help text already says this driver supports
PCF2127/29, so we can simply add pcf2129 to device id list.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:41 +01:00
Akinobu Mita
9408ec1af8 rtc: pcf2127: add support for spi interface
pcf2127 has selectable I2C-bus and SPI-bus interface support.

This adds support for SPI interface.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:41 +01:00
Akinobu Mita
907b326258 rtc: pcf2127: convert to use regmap
pcf2127 has selectable I2C-bus and SPI-bus interface support.
Currently rtc-pcf2127 driver only supports I2C.

This is preparation for support for SPI interface.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:40 +01:00
Michael Büsch
a696b31e2f rtc: rv3029: Add thermometer hwmon support
This adds support to
- enable/disable the thermometer
- set the temperature scanning interval
- read the current temperature that is used for temp compensation.
via hwmon interface

Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:40 +01:00
Michael Büsch
39387dc2cf rtc: rv3029: Add update_bits helper for eeprom access
This simplifies the update of single bits in the eeprom.

Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:39 +01:00
Josh Poimboeuf
361c6ed6b1 rtc: ds1685: actually spin forever in poweroff error path
objtool reports the following warnings:

  drivers/rtc/rtc-ds1685.o: warning: objtool: ds1685_rtc_work_queue()+0x0: duplicate frame pointer save
  drivers/rtc/rtc-ds1685.o: warning: objtool: ds1685_rtc_work_queue()+0x3: duplicate frame pointer setup
  drivers/rtc/rtc-ds1685.o: warning: objtool: ds1685_rtc_work_queue()+0x0: frame pointer state mismatch

The warning message needs to be improved, but what it really means in
this case is that ds1685_rtc_poweroff() has a possible code path where
it can actually fall through to the next function in the object code,
ds1685_rtc_work_queue().

The bug is caused by the use of the unreachable() macro in a place which
is actually reachable.  That causes gcc to assume that the printk()
immediately before the unreachable() macro never returns, when in fact
it does.  So gcc places the printk() at the very end of the function's
object code.  When the printk() returns, the next function starts
executing.

The surrounding comment and printk message state that the code should
spin forever, which explains the unreachable() statement.  However the
actual spin code is missing.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:39 +01:00
Alexander Kochetkov
d586126221 rtc: hym8563: fix invalid year calculation
Year field must be in BCD format, according to
hym8563 datasheet.

Due to the bug year 2016 became 2010.

Fixes: dcaf038493 ("rtc: add hym8563 rtc-driver")
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:38 +01:00
Akinobu Mita
fc1dcb0b39 rtc: ds3232: use rtc->ops_lock to protect alarm operations
ds3232->mutex is used to protect for alarm operations which
need to access status and control registers.

But we can use rtc->ops_lock instead.  rtc->ops_lock is held when most
of rtc_class_ops methods are called, so we only need to explicitly
acquire it from irq handler in order to protect form concurrent
accesses.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:38 +01:00
Akinobu Mita
95c60c1c8f rtc: ds3232: fix issue when irq is shared several devices
ds3232-core requests irq with IRQF_SHARED, so irq can be shared by
several devices.  But the irq handler for ds3232 unconditionally
disables the irq at first and the irq is re-enabled only when the
interrupt source was the ds3232's alarm.  This behaviour breaks the
devices sharing the same irq in the various scenarios.

This converts to use threaded irq and remove outdated code in
suspend/resume paths.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Suggested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:37 +01:00
Akinobu Mita
7522297e16 rtc: ds3232: remove unused UIE code
UIE mode irqs are handled by the generic rtc core now.  But there are
remaining unused code fragments for it.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:37 +01:00
Akinobu Mita
7b4393a62f rtc: ds3232: add register access error checks
Add missing register access error checks and make it return error code
or print error message.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:36 +01:00
Akinobu Mita
dfc2532b55 rtc: ds3232: fix read on /dev/rtc after RTC_AIE_ON
The rtctest (tools/testing/selftests/timers/rtctest.c) found that
reading ds3232 rtc device immediately return the value 0x20 (RTC_AF)
without waiting alarm interrupt.

This is because alarm_irq_enable() of ds3232 driver changes RTC_AF
flag in rtc->irq_data.  So calling ioctl with RTC_AIE_ON generates
invalid value in rtc device.

The lower-level driver should not touch rtc->irq_data directly.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:36 +01:00
Akinobu Mita
080481f54e rtc: merge ds3232 and ds3234
According to "Feature Comparison of the DS323x Real-Time Clocks"
(http://pdfserv.maximintegrated.com/en/an/AN5143.pdf), DS3232 and
DS3234 are very similar.

This merges rtc-ds3232 and rtc-ds3234 with using regmap.
This change also enables to support alarm for ds3234.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Suggested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:35 +01:00
Akinobu Mita
370927c4b6 rtc: ds3232: convert to use regmap
This is preparation for merging rtc-ds3232 i2c driver and rtc-ds3234
spi driver.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Dennis Aberilla <denzzzhome@yahoo.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:35 +01:00
Alexandre Belloni
832315b05b rtc: pxa: fix Kconfig indentation
The pxa section is indented using spaces, use tabs.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:34 +01:00
Michael Büsch
e27e21603e rtc: rv3029: Add device tree property for trickle charger
The trickle charger resistor can be enabled via device tree
property trickle-resistor-ohms.

Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:34 +01:00
Michael Büsch
a7f6e28741 rtc: rv3029: Add functions for EEPROM access
This adds functions for access to the EEPROM memory on the rv3029.

Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:34 +01:00
Michael Büsch
2dca3d9e14 rtc: rv3029: Add i2c register update-bits helper
This simplifies mask/set operations on device I2C registers.

Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:33 +01:00
Michael Büsch
7697de35fa rtc: rv3029: Add missing register definitions
This adds all (according to the data sheet) missing register and bit
definitions.
It also fixes the definition of the trickle charger bit masks.

Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:33 +01:00
Michael Büsch
baba623f12 rtc: rv3029: Add "rv3029" I2C device id
The C2 suffix does not appear in the latest datasheet, so add
a device ID without it.

Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:32 +01:00
Michael Büsch
aba39d27bd rtc: rv3029: Remove all 'C2' suffixes from identifiers
The C2 suffix does not appear anymore in the latest device and
data sheet versions.

Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:32 +01:00
Alexandre Belloni
7a587eae2a rtc: enable COMPILE_TEST
There are several arch-specific RTC drivers that can be successfully
compiled on other platforms. Add a COMPILE_TEST dependency for those.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-03-14 17:08:31 +01:00
Arnd Bergmann
64232fc33a rtc: generic: allow building on all architectures
There are four architectures using this driver, but since we can
build it with COMPILE_TEST, we should try dealing with the absence
of the asm/rtc.h header file, to avoid getting a build error:

drivers/rtc/rtc-generic.c:12:21: fatal error: asm/rtc.h: No such file or directory

This creates an alternative use of the driver, allowing architectures
to pass a set of rtc_class_ops in platform data. We can convert the
four architectures to use this and then remove the original
code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:31 +01:00
Alexandre Belloni
ede44c908d rtc: pcf8523: properly handle oscillator stop bit
The time and date register of the pcf8223 are undefined after a power
reset. Properly handle the OS bit and return -EINVAL when that bit is set.

It is properly removed when setting the time.

This solves an issue where the time and date may be valid for
rtc_valid_tm() but is not the current time.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:30 +01:00
Alexandre Belloni
2da424af45 rtc: pcf85063: remove struct pcf85063
No members of struct pcf85063 are used anymore, remove the whole structure.

Reviewed-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:30 +01:00
Alexandre Belloni
a2892bf445 rtc: pcf85063: remove useless DRV_VERSION
Since the driver is mainlined there is no use for a separate version
number.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:29 +01:00
Alexandre Belloni
e0252ec77b rtc: always show I2C
Always show there is an I2C section, like the other sections.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:28 +01:00
Dan Carpenter
8c09b9fdec rtc: ds1685: passing bogus values to irq_restore
We call spin_lock_irqrestore with "flags" set to zero instead of to the
value from spin_lock_irqsave().

Fixes: aaaf5fbf56 ('rtc: add driver for DS1685 family of real time clocks')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:28 +01:00
Laxman Dewangan
7e84536cb9 rtc: max77686: Use REGMAP_IRQ_REG for regmap-rtc-irqs initialisation
Use macro REGMAP_IRQ_REG from regmap.h to initialise the
regmap irq table for max77686 to have better coding style
and improve readability.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:27 +01:00
Laxman Dewangan
726fe738bd rtc: max77686: Add support for MAX20024/MAX77620 RTC IP
Maxim Semiconductor's PMIC MAX77686 has RTC IP which is
reused in the MAX77620/MAX20024 PMICs.

Add support for these devices in MAX77686 RTC driver. This
device does not have RTC alarm pending status outside of
RTC IP. The RTC IP is having separate I2C address for its
register access.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:27 +01:00
Javier Martinez Canillas
582841a4f6 rtc: mt6397: Remove plaform module alias
The driver uses the MODULE_ALIAS() macro to export a platform module alias
to allow the module to be autoloaded if the device is registered using the
legacy platform registration mechanism but the driver is always used by OF
only machines so the alias is not needed and should just be removed.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:26 +01:00
Alexandre Belloni
ba270bbbf4 rtc: pcf85063: remove useless century handling
pcf85063_get_datetime() tries to handle a century bit but that bit is not
documented and the final value is never used anywhere else in the kernel.

Reviewed-by: Juergen Borleis <jbe@pengutronix.de>
Tested-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:26 +01:00
Geert Uytterhoeven
a25f4a95ec rtc: vr41xx: Wire up alarm_irq_enable
drivers/rtc/rtc-vr41xx.c:229: warning: ‘vr41xx_rtc_alarm_irq_enable’ defined but not used

Apparently the conversion to alarm_irq_enable forgot to wire up the
callback.

Fixes: 16380c153a ("RTC: Convert rtc drivers to use the alarm_irq_enable method")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:25 +01:00
Alexandre Belloni
d2c6b8743b rtc: rv3029: reword Kconfig option
The Kconfig option for rv3029 is not mentioning any part number, explicitly
show rv3029.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:25 +01:00
Grygorii Strashko
ddf7059ce5 rtc: as3722: Drop IRQF_EARLY_RESUME flag
as3722 RTC IRQ is nested threaded and wired to the as3722 inerrupt
controller. So, this flag is not required for nested irqs anymore,
since commit 3c646f2c6a ("genirq: Don't suspend nested_thread irqs
over system suspend") was merged.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Nishanth Menon <nm@ti.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:25 +01:00
Grygorii Strashko
ed214bec68 rtc: tps80031: Drop IRQF_EARLY_RESUME flag
tps80031 RTC IRQ is nested threaded and wired to the tps80031
inerrupt controller. So, this flag is not required for nested irqs
anymore, since commit 3c646f2c6a ("genirq: Don't suspend
nested_thread irqs over system suspend") was merged.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:24 +01:00
Grygorii Strashko
be563c9a27 rtc: tps65910: Drop IRQF_EARLY_RESUME flag
tps65910 RTC IRQ is nested threaded and wired to the tps65910 inerrupt
controller. So, this flag is not required for nested irqs anymore,
since commit 3c646f2c6a ("genirq: Don't suspend nested_thread irqs
over system suspend") was merged.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:23 +01:00
Grygorii Strashko
aa1e8069fc rtc: tps6586x: Drop IRQF_EARLY_RESUME flag
tps6586x RTC IRQ is nested threaded and wired to the tps6586x inerrupt
controller. So, this flag is not required for nested irqs anymore,
since commit 3c646f2c6a ("genirq: Don't suspend nested_thread irqs
over system suspend") was merged.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Nishanth Menon <nm@ti.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:23 +01:00