Now that the retrieval operation may be disposed of by fscache_put_operation()
before we actually set the context, the retrieval-specific cleanup operation
can produce a NULL-pointer dereference when it tries to unconditionally clean
up the netfs context.
Given that it is expected that we'll get at least as far as the place where we
currently set the context pointer and it is unlikely we'll go through the
error handling paths prior to that point, retain the context right from the
point that the retrieval op is allocated.
Concomitant to this, we need to retain the cookie pointer in the retrieval op
also so that we can call the netfs to release its context in the release
method.
In addition, we might now get into fscache_release_retrieval_op() with the op
only initialised. To this end, set the operation to DEAD only after the
release method has been called and skip the n_pages test upon cleanup if the
op is still in the INITIALISED state.
Without these changes, the following oops might be seen:
BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8
...
RIP: 0010:[<ffffffffa0089c98>] fscache_release_retrieval_op+0xae/0x100
...
Call Trace:
[<ffffffffa0088560>] fscache_put_operation+0x117/0x2e0
[<ffffffffa008b8f5>] __fscache_read_or_alloc_pages+0x351/0x3ac
[<ffffffffa00b761f>] __nfs_readpages_from_fscache+0x59/0xbf [nfs]
[<ffffffffa00b06c5>] nfs_readpages+0x10c/0x185 [nfs]
[<ffffffff81124925>] ? alloc_pages_current+0x119/0x13e
[<ffffffff810ee5fd>] ? __page_cache_alloc+0xfb/0x10a
[<ffffffff810f87f8>] __do_page_cache_readahead+0x188/0x22c
[<ffffffff810f8b3a>] ondemand_readahead+0x29e/0x2af
[<ffffffff810f8c92>] page_cache_sync_readahead+0x38/0x3a
[<ffffffff810ef337>] generic_file_read_iter+0x1a2/0x55a
[<ffffffffa00a9dff>] ? nfs_revalidate_mapping+0xd6/0x288 [nfs]
[<ffffffffa00a6a23>] nfs_file_read+0x49/0x70 [nfs]
[<ffffffff811363be>] new_sync_read+0x78/0x9c
[<ffffffff81137164>] __vfs_read+0x13/0x38
[<ffffffff8113721e>] vfs_read+0x95/0x121
[<ffffffff811372f6>] SyS_read+0x4c/0x8a
[<ffffffff81557a52>] system_call_fastpath+0x12/0x17
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
Any time an incomplete operation is cancelled, the operation cancellation
function needs to be called to clean up. This is currently being passed
directly to some of the functions that might want to call it, but not all.
Instead, pass the cancellation method pointer to the fscache_operation_init()
and have that cache it in the operation struct. Further, plug in a dummy
cancellation handler if the caller declines to set one as this allows us to
call the function unconditionally (the extra overhead isn't worth bothering
about as we don't expect to be calling this typically).
The cancellation method must thence be called everywhere the CANCELLED state
is set. Note that we call it *before* setting the CANCELLED state such that
the method can use the old state value to guide its operation.
fscache_do_cancel_retrieval() needs moving higher up in the sources so that
the init function can use it now.
Without this, the following oops may be seen:
FS-Cache: Assertion failed
FS-Cache: 3 == 0 is false
------------[ cut here ]------------
kernel BUG at ../fs/fscache/page.c:261!
...
RIP: 0010:[<ffffffffa0089c1b>] fscache_release_retrieval_op+0x77/0x100
[<ffffffffa008853d>] fscache_put_operation+0x114/0x2da
[<ffffffffa008b8c2>] __fscache_read_or_alloc_pages+0x358/0x3b3
[<ffffffffa00b761f>] __nfs_readpages_from_fscache+0x59/0xbf [nfs]
[<ffffffffa00b06c5>] nfs_readpages+0x10c/0x185 [nfs]
[<ffffffff81124925>] ? alloc_pages_current+0x119/0x13e
[<ffffffff810ee5fd>] ? __page_cache_alloc+0xfb/0x10a
[<ffffffff810f87f8>] __do_page_cache_readahead+0x188/0x22c
[<ffffffff810f8b3a>] ondemand_readahead+0x29e/0x2af
[<ffffffff810f8c92>] page_cache_sync_readahead+0x38/0x3a
[<ffffffff810ef337>] generic_file_read_iter+0x1a2/0x55a
[<ffffffffa00a9dff>] ? nfs_revalidate_mapping+0xd6/0x288 [nfs]
[<ffffffffa00a6a23>] nfs_file_read+0x49/0x70 [nfs]
[<ffffffff811363be>] new_sync_read+0x78/0x9c
[<ffffffff81137164>] __vfs_read+0x13/0x38
[<ffffffff8113721e>] vfs_read+0x95/0x121
[<ffffffff811372f6>] SyS_read+0x4c/0x8a
[<ffffffff81557a52>] system_call_fastpath+0x12/0x17
The assertion is showing that the remaining number of pages (n_pages) is not 0
when the operation is being released.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
Call fscache_put_operation() or a wrapper on any op that has gone through
fscache_operation_init() so that the accounting shown in /proc is done
correctly, specifically fscache_n_op_release.
fscache_put_operation() therefore now allows an op in the INITIALISED state as
well as in the CANCELLED and COMPLETE states.
Note that this means that an operation can get put that doesn't have its
->object pointer filled in, so anything that depends on the object needs to be
conditional in fscache_put_operation().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
Cancellation of an in-progress operation needs to update the relevant counters
and start any operations that are pending waiting on this one.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
Count and display through /proc/fs/fscache/stats the number of initialised
operations.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
Out of line fscache_operation_init() so that it can access internal FS-Cache
features, such as stats, in a later commit.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
Currently, fscache_cancel_op() only cancels pending operations - attempts to
cancel in-progress operations are ignored. This leads to a problem in
fscache_wait_for_operation_activation() whereby the wait is terminated, but
the object has been killed.
The check at the end of the function now triggers because it's no longer
contingent on the cache having produced an I/O error since the commit that
fixed the logic error in fscache_object_is_dead().
The result of the check is that it tries to cancel the operation - but since
the object may not be pending by this point, the cancellation request may be
ignored - with the result that the the object is just put by the caller and
fscache_put_operation has an assertion failure because the operation isn't in
either the COMPLETE or the CANCELLED states.
To fix this, we permit in-progress ops to be cancelled under some
circumstances.
The bug results in an oops that looks something like this:
FS-Cache: fscache_wait_for_operation_activation() = -ENOBUFS [obj dead 3]
FS-Cache:
FS-Cache: Assertion failed
FS-Cache: 3 == 5 is false
------------[ cut here ]------------
kernel BUG at ../fs/fscache/operation.c:432!
...
RIP: 0010:[<ffffffffa0088574>] fscache_put_operation+0xf2/0x2cd
Call Trace:
[<ffffffffa008b92a>] __fscache_read_or_alloc_pages+0x2ec/0x3b3
[<ffffffffa00b761f>] __nfs_readpages_from_fscache+0x59/0xbf [nfs]
[<ffffffffa00b06c5>] nfs_readpages+0x10c/0x185 [nfs]
[<ffffffff81124925>] ? alloc_pages_current+0x119/0x13e
[<ffffffff810ee5fd>] ? __page_cache_alloc+0xfb/0x10a
[<ffffffff810f87f8>] __do_page_cache_readahead+0x188/0x22c
[<ffffffff810f8b3a>] ondemand_readahead+0x29e/0x2af
[<ffffffff810f8c92>] page_cache_sync_readahead+0x38/0x3a
[<ffffffff810ef337>] generic_file_read_iter+0x1a2/0x55a
[<ffffffffa00a9dff>] ? nfs_revalidate_mapping+0xd6/0x288 [nfs]
[<ffffffffa00a6a23>] nfs_file_read+0x49/0x70 [nfs]
[<ffffffff811363be>] new_sync_read+0x78/0x9c
[<ffffffff81137164>] __vfs_read+0x13/0x38
[<ffffffff8113721e>] vfs_read+0x95/0x121
[<ffffffff811372f6>] SyS_read+0x4c/0x8a
[<ffffffff81557a52>] system_call_fastpath+0x12/0x17
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
fscache_object_is_dead() returns true only if the object is marked dead and
the cache got an I/O error. This should be a logical OR instead. Since two
of the callers got split up into handling for separate subcases, expand the
other callers and kill the function. This is probably the right thing to do
anyway since one of the subcases isn't about the object at all, but rather
about the cache.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
When an object is being marked as no longer live, do this under the object
spinlock to prevent a race with operation submission targeted on that object.
The problem occurs due to the following pair of intertwined sequences when the
cache tries to create an object that would take it over the hard available
space limit:
NETFS INTERFACE
===============
(A) The netfs calls fscache_acquire_cookie(). object creation is deferred to
the object state machine and the netfs is allowed to continue.
OBJECT STATE MACHINE KTHREAD
============================
(1) The object is looked up on disk by fscache_look_up_object()
calling cachefiles_walk_to_object(). The latter finds that the
object is not yet represented on disk and calls
fscache_object_lookup_negative().
(2) fscache_object_lookup_negative() sets FSCACHE_COOKIE_NO_DATA_YET
and clears FSCACHE_COOKIE_LOOKING_UP, thus allowing the netfs to
start queuing read operations.
(B) The netfs calls fscache_read_or_alloc_pages(). This calls
fscache_wait_for_deferred_lookup() which sees FSCACHE_COOKIE_LOOKING_UP
become clear, allowing the read to begin.
(C) A read operation is set up and passed to fscache_submit_op() to deal
with.
(3) cachefiles_walk_to_object() calls cachefiles_has_space(), which
fails (or one of the file operations to create stuff fails).
cachefiles returns an error to fscache.
(4) fscache_look_up_object() transits to the LOOKUP_FAILURE state,
(5) fscache_lookup_failure() sets FSCACHE_OBJECT_LOOKED_UP and
FSCACHE_COOKIE_UNAVAILABLE and clears FSCACHE_COOKIE_LOOKING_UP
then transits to the KILL_OBJECT state.
(6) fscache_kill_object() clears FSCACHE_OBJECT_IS_LIVE in an attempt
to reject any further requests from the netfs.
(7) object->n_ops is examined and found to be 0.
fscache_kill_object() transits to the DROP_OBJECT state.
(D) fscache_submit_op() locks the object spinlock, sees if it can dispatch
the op immediately by calling fscache_object_is_active() - which fails
since FSCACHE_OBJECT_IS_AVAILABLE has not yet been set.
(E) fscache_submit_op() then tests FSCACHE_OBJECT_LOOKED_UP - which is set.
It then queues the object and increments object->n_ops.
(8) fscache_drop_object() releases the object and eventually
fscache_put_object() calls cachefiles_put_object() which suffers
an assertion failure here:
ASSERTCMP(object->fscache.n_ops, ==, 0);
Locking the object spinlock in step (6) around the clearance of
FSCACHE_OBJECT_IS_LIVE ensures that the the decision trees in
fscache_submit_op() and fscache_submit_exclusive_op() don't see the IS_LIVE
flag being cleared mid-decision: either the op is queued before step (7) - in
which case fscache_kill_object() will see n_ops>0 and will deal with the op -
or the op will be rejected.
This, combined with rejecting op submission if the target object is dying, fix
the problem.
The problem shows up as the following oops:
CacheFiles: Assertion failed
CacheFiles: 1 == 0 is false
------------[ cut here ]------------
kernel BUG at ../fs/cachefiles/interface.c:339!
...
RIP: 0010:[<ffffffffa014fd9c>] [<ffffffffa014fd9c>] cachefiles_put_object+0x2a4/0x301 [cachefiles]
...
Call Trace:
[<ffffffffa008674b>] fscache_put_object+0x18/0x21 [fscache]
[<ffffffffa00883e6>] fscache_object_work_func+0x3ba/0x3c9 [fscache]
[<ffffffff81054dad>] process_one_work+0x226/0x441
[<ffffffff81055d91>] worker_thread+0x273/0x36b
[<ffffffff81055b1e>] ? rescuer_thread+0x2e1/0x2e1
[<ffffffff81059b9d>] kthread+0x10e/0x116
[<ffffffff81059a8f>] ? kthread_create_on_node+0x1bb/0x1bb
[<ffffffff815579ac>] ret_from_fork+0x7c/0xb0
[<ffffffff81059a8f>] ? kthread_create_on_node+0x1bb/0x1bb
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
Reject new operations that are being submitted against an object if that
object has failed its lookup or creation states or has been killed by the
cache backend for some other reason, such as having been culled.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
When submitting an operation, prefer to cancel the operation immediately
rather than queuing it for later processing if the object is marked as dying
(ie. the object state machine has reached the KILL_OBJECT state).
Whilst we're at it, change the series of related test_bit() calls into a
READ_ONCE() and bitwise-AND operators to reduce the number of load
instructions (test_bit() has a volatile address).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
Move fscache_report_unexpected_submission() up within operation.c so that it
can be called from fscache_submit_exclusive_op() too.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
Count the number of objects that get culled by the cache backend and the
number of objects that the cache backend declines to instantiate due to lack
of space in the cache.
These numbers are made available through /proc/fs/fscache/stats
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Gn2o
-----END PGP SIGNATURE-----
Merge tag 'locks-v3.20-2' of git://git.samba.org/jlayton/linux
Pull file locking fixes from Jeff Layton:
"A small set of patches to fix problems with the recent file locking
changes that we discussed earlier this week"
"
* tag 'locks-v3.20-2' of git://git.samba.org/jlayton/linux:
locks: fix list insertion when lock is split in two
locks: remove conditional lock release in middle of flock_lock_file
locks: only remove leases associated with the file being closed
Revert "locks: keep a count of locks on the flctx lists"
Like in 3.19, I once more have a multi-stage cleanup for one asm-generic
header file, this time the work was done by Michael Tsirkin and cleans
up the uaccess.h file in asm-generic, as well as all architectures for
which the respective maintainers did not pick up his patches directly.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=LROx
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic uaccess.h cleanup from Arnd Bergmann:
"Like in 3.19, I once more have a multi-stage cleanup for one
asm-generic header file, this time the work was done by Michael
Tsirkin and cleans up the uaccess.h file in asm-generic, as well as
all architectures for which the respective maintainers did not pick up
his patches directly"
* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (37 commits)
sparc32: nocheck uaccess coding style tweaks
sparc64: nocheck uaccess coding style tweaks
xtensa: macro whitespace fixes
sh: macro whitespace fixes
parisc: macro whitespace fixes
m68k: macro whitespace fixes
m32r: macro whitespace fixes
frv: macro whitespace fixes
cris: macro whitespace fixes
avr32: macro whitespace fixes
arm64: macro whitespace fixes
arm: macro whitespace fixes
alpha: macro whitespace fixes
blackfin: macro whitespace fixes
sparc64: uaccess_64 macro whitespace fixes
sparc32: uaccess_32 macro whitespace fixes
avr32: whitespace fix
sh: fix put_user sparse errors
metag: fix put_user sparse errors
ia64: fix put_user sparse errors
...
On top of tht is the major rework of lguest, to use PCI and virtio 1.0, to
double-check the implementation.
Then comes the inevitable fixes and cleanups from that work.
Thanks,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ivCe
-----END PGP SIGNATURE-----
Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio updates from Rusty Russell:
"OK, this has the big virtio 1.0 implementation, as specified by OASIS.
On top of tht is the major rework of lguest, to use PCI and virtio
1.0, to double-check the implementation.
Then comes the inevitable fixes and cleanups from that work"
* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (80 commits)
virtio: don't set VIRTIO_CONFIG_S_DRIVER_OK twice.
virtio_net: unconditionally define struct virtio_net_hdr_v1.
tools/lguest: don't use legacy definitions for net device in example launcher.
virtio: Don't expose legacy net features when VIRTIO_NET_NO_LEGACY defined.
tools/lguest: use common error macros in the example launcher.
tools/lguest: give virtqueues names for better error messages
tools/lguest: more documentation and checking of virtio 1.0 compliance.
lguest: don't look in console features to find emerg_wr.
tools/lguest: don't start devices until DRIVER_OK status set.
tools/lguest: handle indirect partway through chain.
tools/lguest: insert driver references from the 1.0 spec (4.1 Virtio Over PCI)
tools/lguest: insert device references from the 1.0 spec (4.1 Virtio Over PCI)
tools/lguest: rename virtio_pci_cfg_cap field to match spec.
tools/lguest: fix features_accepted logic in example launcher.
tools/lguest: handle device reset correctly in example launcher.
virtual: Documentation: simplify and generalize paravirt_ops.txt
lguest: remove NOTIFY call and eventfd facility.
lguest: remove NOTIFY facility from demonstration launcher.
lguest: use the PCI console device's emerg_wr for early boot messages.
lguest: always put console in PCI slot #1.
...
This contains two new drivers, one for Allwinner SoCs and the other for
Imagination Technologies' Pistachio SoC.
Complementing this are a couple of fixes to the Atmel HLCDC PWM and STi
PWM drivers as well as minor cleanups to the core and the Tegra driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3uQb
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains two new drivers, one for Allwinner SoCs and the other
for Imagination Technologies' Pistachio SoC.
Complementing this are a couple of fixes to the Atmel HLCDC PWM and
STi PWM drivers as well as minor cleanups to the core and the Tegra
driver"
* tag 'pwm/for-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: tegra: Use NSEC_PER_SEC
pwm: Remove unnecessary check before of_node_put()
pwm: Add device tree binding document for IMG PWM DAC
pwm: Imagination Technologies PWM DAC driver
pwm: sti: Maintain a bitmap of configured devices
pwm: sunxi: document OF bindings
pwm: Add Allwinner SoC support
pwm: atmel-hlcdc: Prevent division by zero
pwm: atmel-hlcdc: Depend on HAVE_CLK
Pull dmaengine updates from Vinod Koul:
"This update brings:
- the big cleanup up by Maxime for device control and slave
capabilities. This makes the API much cleaner.
- new IMG MDC driver by Andrew
- new Renesas R-Car Gen2 DMA Controller driver by Laurent along with
bunch of fixes on rcar drivers
- odd fixes and updates spread over driver"
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits)
dmaengine: pl330: add DMA_PAUSE feature
dmaengine: pl330: improve pl330_tx_status() function
dmaengine: rcar-dmac: Disable channel 0 when using IOMMU
dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata
dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device
dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR
dmaengine: rcar-dmac: Fix spinlock issues in interrupt
dmaenegine: edma: fix sparse warnings
dmaengine: rcar-dmac: Fix uninitialized variable usage
dmaengine: shdmac: extend PM methods
dmaengine: shdmac: use SET_RUNTIME_PM_OPS()
dmaengine: pl330: fix bug that cause start the same descs in cyclic
dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers
dmaengine: at_xdmac: simplify channel configuration stuff
dmaengine: at_xdmac: introduce save_cc field
dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel
ioat: fail self-test if wait_for_completion times out
dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
dmaengine: dw: amend description of dma_dev field
dmatest: move src_off, dst_off, len inside loop
...
Pull watchdog updates from Wim Van Sebroeck:
"This adds the following new drivers:
- ImgTec PDC Watchdog Timer Driver,
- Mediatek SoC integrated watchdog
Add support for BCM5301X, IT8783, NCT6791 and NCT6792 WDT's
Add bcm47xx_wdt and da9063 restart handlers and contains overall
improvements and fixes"
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: bcm47xx_wdt.c: allow enabling on BCM5301X arch
watchdog: jz4740: Add DT support
dt: watchdog: Add DT binding documentation for jz4740 watchdog timer
watchdog: dw_wdt: Try to get a 30 second watchdog by default
watchdog: dw_wdt: pat the watchdog before enabling it
watchdog: w83627hf_wdt: Add support for NCT6791 and NCT6792
watchdog: bcm47xx_wdt.c: add restart handler support
watchdog: gpio_wdt: Add "always_running" feature to GPIO watchdog
watchdog: da9063: Add restart handler support
ARM: mediatek: dts: Add bindings for watchdog
watchdog: Add driver for Mediatek watchdog
watchdog: Fix omap watchdogs to enable the magic close bit
watchdog: rt2880_wdt: minor clean up
watchdog: hpwdt: Fix initialization message in hpwdt.c
watchdog: it87_wdt: add IT8783 ID
watchdog: imx2: Constify struct regmap_config and watchdog_ops
DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
watchdog: ImgTec PDC Watchdog Timer Driver
- Replace made-up, unallocated Vendor and Model values of firewire-core's
Configuration ROM register root directory by properly registered IDs.
(These IDs are visible to peer nodes on the bus and locally via sysfs,
but they are not involved in protocol matching or driver matching, nor
are they used in stock udev rules.)
- Remove some unneccessary code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=qJGA
-----END PGP SIGNATURE-----
Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull fireware updates from Stefan Richter:
"IEEE 1394 subsystem updates:
- Replace made-up, unallocated Vendor and Model values of
firewire-core's Configuration ROM register root directory by
properly registered IDs. (These IDs are visible to peer nodes on
the bus and locally via sysfs, but they are not involved in
protocol matching or driver matching, nor are they used in stock
udev rules)
- Remove some unneccessary code"
* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: use correct vendor/model IDs
firewire: sbp2: remove redundant check for bidi command
firewire: ohci: Remove unused function
NAND:
* Add new Hisilicon NAND driver for Hip04
* Add default reboot handler, to ensure all outstanding erase transactions
complete in time
* jz4740: convert to use GPIO descriptor API
* Atmel: add support for sama5d4
* Change default bitflip threshold to 75% of correction strength
* Miscellaneous cleanups and bugfixes
SPI NOR:
* Freescale QuadSPI:
- Fix a few probe() and remove() issues
- Add a MAINTAINERS entry for this driver
- Tweak transfer size to increase read performance
- Add suspend/resume support
* Add Micron quad I/O support
* ST FSM SPI: miscellaneous fixes
JFFS2:
* gracefully handle corrupted 'offset' field found on flash
Other:
* bcm47xxpart: add tweaks for a few new devices
* mtdconcat: set return lengths properly for mtd_write_oob()
* map_ram: enable use with mtdoops
* maps: support fallback to ROM/UBI for write-protected NOR flash
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+nRk
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"NAND:
- Add new Hisilicon NAND driver for Hip04
- Add default reboot handler, to ensure all outstanding erase
transactions complete in time
- jz4740: convert to use GPIO descriptor API
- Atmel: add support for sama5d4
- Change default bitflip threshold to 75% of correction strength
- Miscellaneous cleanups and bugfixes
SPI NOR:
- Freescale QuadSPI:
- Fix a few probe() and remove() issues
- Add a MAINTAINERS entry for this driver
- Tweak transfer size to increase read performance
- Add suspend/resume support
- Add Micron quad I/O support
- ST FSM SPI: miscellaneous fixes
JFFS2:
- gracefully handle corrupted 'offset' field found on flash
Other:
- bcm47xxpart: add tweaks for a few new devices
- mtdconcat: set return lengths properly for mtd_write_oob()
- map_ram: enable use with mtdoops
- maps: support fallback to ROM/UBI for write-protected NOR flash"
* tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits)
mtd: hisilicon: && vs & typo
jffs2: fix handling of corrupted summary length
mtd: hisilicon: add device tree binding documentation
mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc
mtd: avoid registering reboot notifier twice
mtd: concat: set the return lengths properly
mtd: kconfig: replace PPC_OF with PPC
mtd: denali: remove unnecessary stubs
mtd: nand: remove redundant local variable
MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver
mtd: fsl-quadspi: improve read performance by increase AHB transfer size
mtd: fsl-quadspi: Remove unnecessary 'map_failed' label
mtd: fsl-quadspi: Remove unneeded success/error messages
mtd: fsl-quadspi: Fix the error paths
mtd: nand: omap: drop condition with no effect
mtd: nand: jz4740: Convert to GPIO descriptor API
mtd: nand: Request strength instead of bytes for soft BCH
mtd: nand: default bitflip-reporting threshold to 75% of correction strength
mtd: atmel_nand: introduce a new compatible string for sama5d4 chip
mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction()
...
Instead of using the literal value for the number of nanoseconds per
second, use the macro instead to increase readability.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Pull networking updates from David Miller:
1) Missing netlink attribute validation in nft_lookup, from Patrick
McHardy.
2) Restrict ipv6 partial checksum handling to UDP, since that's the
only case it works for. From Vlad Yasevich.
3) Clear out silly device table sentinal macros used by SSB and BCMA
drivers. From Joe Perches.
4) Make sure the remote checksum code never creates a situation where
the remote checksum is applied yet the tunneling metadata describing
the remote checksum transformation is still present. Otherwise an
external entity might see this and apply the checksum again. From
Tom Herbert.
5) Use msecs_to_jiffies() where applicable, from Nicholas Mc Guire.
6) Don't explicitly initialize timer struct fields, use setup_timer()
and mod_timer() instead. From Vaishali Thakkar.
7) Don't invoke tg3_halt() without the tp->lock held, from Jun'ichi
Nomura.
8) Missing __percpu annotation in ipvlan driver, from Eric Dumazet.
9) Don't potentially perform skb_get() on shared skbs, also from Eric
Dumazet.
10) Fix COW'ing of metrics for non-DST_HOST routes in ipv6, from Martin
KaFai Lau.
11) Fix merge resolution error between the iov_iter changes in vhost and
some bug fixes that occurred at the same time. From Jason Wang.
12) If rtnl_configure_link() fails we have to perform a call to
->dellink() before unregistering the device. From WANG Cong.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (39 commits)
net: dsa: Set valid phy interface type
rtnetlink: call ->dellink on failure when ->newlink exists
com20020-pci: add support for eae single card
vhost_net: fix wrong iter offset when setting number of buffers
net: spelling fixes
net/core: Fix warning while make xmldocs caused by dev.c
net: phy: micrel: disable NAND-tree for KSZ8021, KSZ8031, KSZ8051, KSZ8081
ipv6: fix ipv6_cow_metrics for non DST_HOST case
openvswitch: Fix key serialization.
r8152: restore hw settings
hso: fix rx parsing logic when skb allocation fails
tcp: make sure skb is not shared before using skb_get()
bridge: netfilter: Move sysctl-specific error code inside #ifdef
ipv6: fix possible deadlock in ip6_fl_purge / ip6_fl_gc
ipvlan: add a missing __percpu pcpu_stats
tg3: Hold tp->lock before calling tg3_halt() from tg3_init_one()
bgmac: fix device initialization on Northstar SoCs (condition typo)
qlcnic: Delete existing multicast MAC list before adding new
net/mlx5_core: Fix configuration of log_uar_page_sz
sunvnet: don't change gso data on clones
...
yet-another-livelock in raid5, and a problem with write errors
to 4K-block devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=1BWV
-----END PGP SIGNATURE-----
Merge tag 'md/3.20-fixes' of git://neil.brown.name/md
Pull md bugfixes from Neil Brown:
"Three bug md fixes for 3.20
yet-another-livelock in raid5, and a problem with write errors to
4K-block devices"
* tag 'md/3.20-fixes' of git://neil.brown.name/md:
md/raid5: Fix livelock when array is both resyncing and degraded.
md/raid10: round up to bdev_logical_block_size in narrow_write_error.
md/raid1: round up to bdev_logical_block_size in narrow_write_error
not be able to decide that an event should not be logged
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJU47aGAAoJEKurIx+X31iBiX4P+wfq7uUKwQ4riD2jFppvhrcm
W2Qx/iIv9QN77ZIw5I45VqGbDKXmlThl41ISem9BlKd8jKaldY3lUlQMfrPC5V11
9bl/7LsZoQLlbuwYR6uiLdKqW9wd6d5Y1mczdSDM5wCtfMw/s+C/ETzuRVHsQZjF
1LTB0rb0NPouX+y3D8aDrvk9Os5ozZsz3N/y6e3TsI/wV8d3rqwH8C8x3RjB2Evx
3WRSwoSOq9kHEbeg1r7PMKYKWAoJs97Kwo4EgJELqn8fxYMWnSsoDZGr9P2PX8oT
TKgSFPnhgCLw+qlWy81MM8hutnHKnN6oXcJKzE0nHtD8JlJ/M/HdDAPIg8G9aLIn
ABxPg6OORs/4YJQYGFA8ixx3TfIMspMU2m9KGoCcerpGaHCHhrlylJyheUvhRkPP
u8pjGz+31d3bVVRzCLJt1eqo3H/y0wcURWaemk23lcUIsdDqisjZDzZrZxyZuWaH
eDTKmHsZB/I4wnOs4Ke+U7oo/u+NtBzPmBSJcshgKSONLPd7bSJtjckLoa3wSf5I
q5DkZgxrUYkO6tIoAAi/N2tc/2qkjTOug79BP9YKN3elmv3nxW4gieSaUb5p16bd
ORpZLt3SDKEPv+79a/1e7ZyR7ik9Evhzc+/72M1IZvmdr3uOjj+xkuE1uRU7vuvX
44Jmx6mEtPK1mVBfwkdG
=jAUs
-----END PGP SIGNATURE-----
Merge tag 'please-pull-fixmcelog' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull mcelog regression fix from Tony Luck:
"Fix regression - functions on the mce notifier chain should not be
able to decide that an event should not be logged"
* tag 'please-pull-fixmcelog' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
x86/mce: Fix regression. All error records should report via /dev/mcelog
the staging tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CA9p
-----END PGP SIGNATURE-----
Merge tag 'docs-fix' of git://git.lwn.net/linux-2.6
Pull DocBook build fix from Jonathan Corbet:
"Fix the DocBook build failure caused by the move of the i2o subsystem
to the staging tree"
* tag 'docs-fix' of git://git.lwn.net/linux-2.6:
Fix docs build failure caused by i2o removal
Pull nfsd bugfixes from Bruce Fields:
"These are fixes for two bugs introduced during the merge window"
* 'for-3.20' of git://linux-nfs.org/~bfields/linux:
nfsd4: fix v3-less build
nfsd: fix comparison in fh_fsid_match()
Commit a7854487cd:
md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write.
Causes an RCW cycle to be forced even when the array is degraded.
A degraded array cannot support RCW as that requires reading all data
blocks, and one may be missing.
Forcing an RCW when it is not possible causes a live-lock and the code
spins, repeatedly deciding to do something that cannot succeed.
So change the condition to only force RCW on non-degraded arrays.
Reported-by: Manibalan P <pmanibalan@amiindia.co.in>
Bisected-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Tested-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: a7854487cd
Cc: stable@vger.kernel.org (v3.7+)
Pull lazytime mount option support from Al Viro:
"Lazytime stuff from tytso"
* 'lazytime' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ext4: add optimization for the lazytime mount option
vfs: add find_inode_nowait() function
vfs: add support for a lazytime mount option
Pull iov_iter updates from Al Viro:
"More iov_iter work - missing counterpart of iov_iter_init() for
bvec-backed ones and vfs_read_iter()/vfs_write_iter() - wrappers for
sync calls of ->read_iter()/->write_iter()"
* 'iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: add vfs_iter_{read,write} helpers
new helper: iov_iter_bvec()
Pull getname/putname updates from Al Viro:
"Rework of getname/getname_kernel/etc., mostly from Paul Moore. Gets
rid of quite a pile of kludges between namei and audit..."
* 'getname2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
audit: replace getname()/putname() hacks with reference counters
audit: fix filename matching in __audit_inode() and __audit_inode_child()
audit: enable filename recording via getname_kernel()
simpler calling conventions for filename_mountpoint()
fs: create proper filename objects using getname_kernel()
fs: rework getname_kernel to handle up to PATH_MAX sized filenames
cut down the number of do_path_lookup() callers
Pull debugfs patches from Al Viro:
"debugfs patches, mostly to make it possible for something like tracefs
to be transparently automounted on given directory in debugfs.
New primitive in there is debugfs_create_automount(name, parent, func,
arg), which creates a directory and makes its ->d_automount() return
func(arg). Another missing primitive was debugfs_create_file_size() -
open-coded in quite a few places. Dave's patch adds it and converts
the open-code instances to calling it"
* 'debugfs_automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
debugfs: Provide a file creation function that also takes an initial size
new primitive: debugfs_create_automount()
debugfs: split end_creating() into success and failure cases
debugfs: take mode-dependent parts of debugfs_get_inode() into callers
fold debugfs_mknod() into callers
fold debugfs_create() into caller
fold debugfs_mkdir() into caller
debugfs_mknod(): get rid useless arguments
fold debugfs_link() into caller
debugfs: kill __create_file()
debugfs: split the beginning and the end of __create_file() off
debugfs_{mkdir,create,link}(): get rid of redundant argument
Pull misc VFS updates from Al Viro:
"This cycle a lot of stuff sits on topical branches, so I'll be sending
more or less one pull request per branch.
This is the first pile; more to follow in a few. In this one are
several misc commits from early in the cycle (before I went for
separate branches), plus the rework of mntput/dput ordering on umount,
switching to use of fs_pin instead of convoluted games in
namespace_unlock()"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch the IO-triggering parts of umount to fs_pin
new fs_pin killing logics
allow attaching fs_pin to a group not associated with some superblock
get rid of the second argument of acct_kill()
take count and rcu_head out of fs_pin
dcache: let the dentry count go down to zero without taking d_lock
pull bumping refcount into ->kill()
kill pin_put()
mode_t whack-a-mole: chelsio
file->f_path.dentry is pinned down for as long as the file is open...
get rid of lustre_dump_dentry()
gut proc_register() a bit
kill d_validate()
ncpfs: get rid of d_validate() nonsense
selinuxfs: don't open-code d_genocide()
Merge yet more updates from Andrew Morton:
- a pile of minor fs fixes and cleanups
- kexec updates
- random misc fixes in various places: vmcore, rbtree, eventfd, ipc, seccomp.
- a series of python-based kgdb helper scripts
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits)
seccomp: cap SECCOMP_RET_ERRNO data to MAX_ERRNO
samples/seccomp: improve label helper
ipc,sem: use current->state helpers
scripts/gdb: disable pagination while printing from breakpoint handler
scripts/gdb: define maintainer
scripts/gdb: convert CpuList to generator function
scripts/gdb: convert ModuleList to generator function
scripts/gdb: use a generator instead of iterator for task list
scripts/gdb: ignore byte-compiled python files
scripts/gdb: port to python3 / gdb7.7
scripts/gdb: add basic documentation
scripts/gdb: add lx-lsmod command
scripts/gdb: add class to iterate over CPU masks
scripts/gdb: add lx_current convenience function
scripts/gdb: add internal helper and convenience function for per-cpu lookup
scripts/gdb: add get_gdbserver_type helper
scripts/gdb: add internal helper and convenience function to retrieve thread_info
scripts/gdb: add is_target_arch helper
scripts/gdb: add helper and convenience function to look up tasks
scripts/gdb: add task iteration class
...
The value resulting from the SECCOMP_RET_DATA mask could exceed MAX_ERRNO
when setting errno during a SECCOMP_RET_ERRNO filter action. This makes
sure we have a reliable value being set, so that an invalid errno will not
be ignored by userspace.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Dmitry V. Levin <ldv@altlinux.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Call __set_current_state() instead of assigning the new state directly.
These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments, keeping
track of who changed the state.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While reporting the (refreshed) list of modules on automatic updates we
may hit the page boundary of the output console and cause a stop if
pagination is enabled. However, gdb does not accept user input while
running over the breakpoint handler. So we get stuck, and the user is
forced to interrupt gdb.
Resolve this by disabling pagination during automatic symbol updates. We
restore the user's configuration once done.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'm proposing myself for keeping an eye on these scripts and integrating
contributions.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Analogously to the task list, convert the module list to a generator
function. It noticeably simplifies the code.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The iterator does not return any task_struct from the thread_group list
because the first condition in the 'if not t or ...' will only be the
first time None.
Instead of keeping track of the state ourself in the next() function, we
fall back using Python's generator.
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using the gdb scripts leaves byte-compiled python files in the scripts/
directory. These should be ignored by git.
[jan.kiszka@siemens.com: drop redundant mrproper rule as suggested by Michal]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I tried to use these scripts in an ubuntu 14.04 host (gdb 7.7 compiled
against python 3.3) but there were several errors.
I believe this patch fixes these issues so that the commands now work (I
tested lx-symbols, lx-dmesg, lx-lsmod).
Main issues that needed to be resolved:
* In python 2 iterators have a "next()" method. In python 3 it is
__next__() instead (so let's just add both).
* In older python versions there was an implicit conversion
in object.__format__() (used when an object is in string.format())
where it was converting the object to str first and then
calling str's __format__(). This has now been removed so
we must explicitly convert to str the objects for which
we need to keep this behavior.
* In dmesg.py: in python 3 log_buf is now a "memoryview" object
which needs to be converted to a string in order to use string
methods like "splitlines()". Luckily memoryview exists in
python 2.7.6 as well, so we can convert log_buf to memoryview
and use the same code in both python 2 and python 3.
This version of the patch has now been tested with gdb 7.7 and both python
3.4 and python 2.7.6 (I think asking for at least python 2.7.6 is a
reasonable requirement instead of complicating the code with version
checks etc).
Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a lsmod-like command to list all currently loaded modules of the
target.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Will be used first to count module references. It is optimized to read
the mask only once per stop.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a shorthand for *$lx_per_cpu("current_task"), i.e. a convenience
function to retrieve the currently running task of the active context.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
