Zstd used an array of length 1 to mean a flexible array for C89
compatibility. Switch to a C99 flexible array to fix the UBSAN warning.
Tested locally by booting the kernel and writing to and reading from a
BtrFS filesystem with zstd compression enabled. I was unable to reproduce
the issue before the fix, however it is a trivial change.
Link: https://lkml.kernel.org/r/20231012213428.1390905-1-nickrterrell@gmail.com
Reported-by: syzbot+1f2eb3e8cd123ffce499@syzkaller.appspotmail.com
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
assert(x) should emit a warning if x is false. WARN_ON(x) emits a
warning if x is true. Thus, assert(x) should be defined as WARN_ON(!x)
rather than WARN_ON(x).
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Backport the relevant part of upstream commit 5b266196 [0].
This fixes in-place decompression for x86-64 kernel decompression. It
uses a bound of 131072 + (uncompressed_size >> 8), which can be violated
after upstream commit 6a7ede3d [1], as zstd can use part of the output
buffer as temporary storage, and without this patch needs a bound of
~262144.
The fix is for zstd to detect that the input and output buffers overlap,
so that zstd knows it can't use the overlapping portion of the output
buffer as tempoary storage. If the margin is not large enough, this will
ensure that zstd will fail the decompression, rather than overwriting
part of the input data, and causing corruption.
This fix has been landed upstream and is in release v1.5.4. That commit
also adds unit and fuzz tests to verify that the margin we use is
respected, and correct. That means that the fix is well tested upstream.
I have not been able to reproduce the potential bug in x86-64 kernel
decompression locally, nor have I recieved reports of failures to
decompress the kernel. It is possible that compression saves enough
space to make it very hard for the issue to appear.
I've boot tested the zstd compressed kernel on x86-64 and i386 with this
patch, which uses in-place decompression, and sanity tested zstd compression
in btrfs / squashfs to make sure that we don't see any issues, but other
uses of zstd shouldn't be affected, because they don't use in-place
decompression.
Thanks to Vasily Gorbik <gor@linux.ibm.com> for debugging a related issue
on s390, which was triggered by the same commit, but was a bug in how
__decompress() was called [2]. And to Sasha Levin <sashal@kernel.org>
for the CC alerting me of the issue.
[0] 5b266196a4
[1] 6a7ede3dfc
[2] https://lore.kernel.org/r/patch-1.thread-41c676.git-41c676c2d153.your-ad-here.call-01675030179-ext-9637@work.hours
CC: Vasily Gorbik <gor@linux.ibm.com>
CC: Heiko Carstens <hca@linux.ibm.com>
CC: Sasha Levin <sashal@kernel.org>
CC: Yann Collet <cyan@fb.com>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Fix the following -Wstringop-overflow warning when building with GCC 11+:
lib/zstd/decompress/huf_decompress.c: In function ‘HUF_readDTableX2_wksp’:
lib/zstd/decompress/huf_decompress.c:700:5: warning: ‘HUF_fillDTableX2.constprop’ accessing 624 bytes in a region of size 52 [-Wstringop-overflow=]
700 | HUF_fillDTableX2(dt, maxTableLog,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
701 | wksp->sortedSymbol, sizeOfSort,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
702 | wksp->rankStart0, wksp->rankVal, maxW,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
703 | tableLog+1,
| ~~~~~~~~~~~
704 | wksp->calleeWksp, sizeof(wksp->calleeWksp) / sizeof(U32));
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/zstd/decompress/huf_decompress.c:700:5: note: referencing argument 6 of type ‘U32 (*)[13]’ {aka ‘unsigned int (*)[13]’}
lib/zstd/decompress/huf_decompress.c:571:13: note: in a call to function ‘HUF_fillDTableX2.constprop’
571 | static void HUF_fillDTableX2(HUF_DEltX2* DTable, const U32 targetLog,
| ^~~~~~~~~~~~~~~~
by using pointer notation instead of array notation.
This is one of the last remaining warnings to be fixed before globally
enabling -Wstringop-overflow.
Co-developed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Updates the kernel's zstd library to v1.5.2, the latest zstd release.
The upstream tag it is updated to is `v1.5.2-kernel`, which contains
several cherry-picked commits on top of the v1.5.2 release which are
required for the kernel update. I will create this tag once the PR is
ready to merge, until then reference the temporary upstream branch
`v1.5.2-kernel-cherrypicks`.
I plan to submit this patch as part of the v6.2 merge window.
I've done basic build testing & testing on x86-64, i386, and aarch64.
I'm merging these patches into my `zstd-next` branch, which is pulled
into `linux-next` for further testing.
I've benchmarked BtrFS with zstd compression on a x86-64 machine, and
saw these results. Decompression speed is a small win across the board.
The lower compression levels 1-4 see both compression speed and
compression ratio wins. The higher compression levels see a small
compression speed loss and about neutral ratio. I expect the lower
compression levels to be used much more heavily than the high
compression levels, so this should be a net win.
Level CTime DTime Ratio
1 -2.95% -1.1% -0.7%
3 -3.5% -1.2% -0.5%
5 +3.7% -1.0% +0.0%
7 +3.2% -0.9% +0.0%
9 -4.3% -0.8% +0.1%
Signed-off-by: Nick Terrell <terrelln@fb.com>
The zstd codebase is imported from the upstream zstd repo, and is over-written on
every update. Upstream keeps the kernel specific code separate from the main
library. So the module definition is moved into the zstd_common_module.c file.
This matches the pattern followed by the zstd-compress and zstd-decompress files.
I've done build and boot testing on x86-64, i386, and aarch64. I've
verified that zstd built both as modules and built-in build and boot.
Signed-off-by: Nick Terrell <terrelln@fb.com>
With CONFIG_ZSTD_COMPRESS=m and CONFIG_ZSTD_DECOMPRESS=y we end up in
a situation when files from lib/zstd/common/ are compiled once to be
linked later for ZSTD_DECOMPRESS (build-in) and ZSTD_COMPRESS (module)
even though CFLAGS are different for builtins and modules.
So far somehow this was not a problem but enabling LLVM LTO exposes
the problem as:
ld.lld: error: linking module flags 'Code Model': IDs have conflicting values in 'lib/built-in.a(zstd_common.o at 5868)' and 'ld-temp.o'
This particular conflict is caused by KBUILD_CFLAGS=-mcmodel=medium vs.
KBUILD_CFLAGS_MODULE=-mcmodel=large , modules use the large model on
POWERPC as explained at
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/powerpc/Makefile?h=v5.18-rc4#n127
but the current use of common files is wrong anyway.
This works around the issue by introducing a zstd_common module with
shared code.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
After the update to zstd-1.4.10 passing -O3 is no longer necessary to
get good performance from zstd. Using the default optimization level -O2
is sufficient to get good performance.
I've measured no significant change to compression speed, and a ~1%
decompression speed loss, which is acceptable.
This fixes the reported parisc -Wframe-larger-than=1536 errors [0]. The
gcc-8-hppa-linux-gnu compiler performed very poorly with -O3, generating
stacks that are ~3KB. With -O2 these same functions generate stacks in
the < 100B, completely fixing the problem. Function size deltas are
listed below:
ZSTD_compressBlock_fast_extDict_generic: 3800 -> 68
ZSTD_compressBlock_fast: 2216 -> 40
ZSTD_compressBlock_fast_dictMatchState: 1848 -> 64
ZSTD_compressBlock_doubleFast_extDict_generic: 3744 -> 76
ZSTD_fillDoubleHashTable: 3252 -> 0
ZSTD_compressBlock_doubleFast: 5856 -> 36
ZSTD_compressBlock_doubleFast_dictMatchState: 5380 -> 84
ZSTD_copmressBlock_lazy2: 2420 -> 72
Additionally, this improves the reported code bloat [1]. With gcc-11
bloat-o-meter shows an 80KB code size improvement:
```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 31/8 grow/shrink: 24/155 up/down: 25734/-107924 (-82190)
Total: Before=6418562, After=6336372, chg -1.28%
```
Compared to before the zstd-1.4.10 update we see a total code size
regression of 105KB, down from 374KB at v5.16-rc1:
```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 292/62 grow/shrink: 56/88 up/down: 235009/-127487 (107522)
Total: Before=6228850, After=6336372, chg +1.73%
```
[0] https://lkml.org/lkml/2021/11/15/710
[1] https://lkml.org/lkml/2021/11/14/189
Link: https://lore.kernel.org/r/20211117014949.1169186-4-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-4-nickrterrell@gmail.com/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
`zstd_opt.c` contains the match finder for the highest compression
levels. These levels are already very slow, and are unlikely to be used
in the kernel. If they are used, they shouldn't be used in latency
sensitive workloads, so slowing them down shouldn't be a big deal.
This saves 188 KB of the 288 KB regression reported by Geert Uytterhoeven [0].
I've also opened an issue upstream [1] so that we can properly tackle
the code size issue in `zstd_opt.c` for all users, and can hopefully
remove this hack in the next zstd version we import.
Bloat-o-meter output on x86-64:
```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 6/5 grow/shrink: 1/9 up/down: 16673/-209939 (-193266)
Function old new delta
ZSTD_compressBlock_opt_generic.constprop - 7559 +7559
ZSTD_insertBtAndGetAllMatches - 6304 +6304
ZSTD_insertBt1 - 1731 +1731
ZSTD_storeSeq - 693 +693
ZSTD_BtGetAllMatches - 255 +255
ZSTD_updateRep - 128 +128
ZSTD_updateTree 96 99 +3
ZSTD_insertAndFindFirstIndexHash3 81 - -81
ZSTD_setBasePrices.constprop 98 - -98
ZSTD_litLengthPrice.constprop 138 - -138
ZSTD_count 362 181 -181
ZSTD_count_2segments 1407 938 -469
ZSTD_insertBt1.constprop 2689 - -2689
ZSTD_compressBlock_btultra2 19990 423 -19567
ZSTD_compressBlock_btultra 19633 15 -19618
ZSTD_initStats_ultra 19825 - -19825
ZSTD_compressBlock_btopt 20374 12 -20362
ZSTD_compressBlock_btopt_extDict 29984 12 -29972
ZSTD_compressBlock_btultra_extDict 30718 15 -30703
ZSTD_compressBlock_btopt_dictMatchState 32689 12 -32677
ZSTD_compressBlock_btultra_dictMatchState 33574 15 -33559
Total: Before=6611828, After=6418562, chg -2.92%
```
[0] https://lkml.org/lkml/2021/11/14/189
[1] https://github.com/facebook/zstd/issues/2862
Link: https://lore.kernel.org/r/20211117014949.1169186-3-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-3-nickrterrell@gmail.com/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
The variable `litLengthSum` is only used by an `assert()`, so when
asserts are disabled the compiler doesn't see any usage and warns.
This issue is already fixed upstream by PR #2838 [0]. It was reported
by the Kernel test robot in [1].
Another approach would be to change zstd's disabled `assert()`
definition to use the argument in a disabled branch, instead of
ignoring the argument. I've avoided this approach because there are
some small changes necessary to get zstd to build, and I would
want to thoroughly re-test for performance, since that is slightly
changing the code in every function in zstd. It seems like a
trivial change, but some functions are pretty sensitive to small
changes. However, I think it is a valid approach that I would
like to see upstream take, so I've opened Issue #2868 to attempt
this upstream.
Lastly, I've chosen not to use __maybe_unused because all code
in lib/zstd/ must eventually be upstreamed. Upstream zstd can't
use __maybe_unused because it isn't portable across all compilers.
[0] https://github.com/facebook/zstd/pull/2838
[1] https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/
[2] https://github.com/facebook/zstd/issues/2868
Link: https://lore.kernel.org/r/20211117014949.1169186-2-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-2-nickrterrell@gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nick Terrell <terrelln@fb.com>
A new warning in clang warns that there is an instance where boolean
expressions are being used with bitwise operators instead of logical
ones:
lib/zstd/decompress/huf_decompress.c:890:25: warning: use of bitwise '&' with boolean operands [-Wbitwise-instead-of-logical]
(BIT_reloadDStreamFast(&bitD1) == BIT_DStream_unfinished)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
zstd does this frequently to help with performance, as logical operators
have branches whereas bitwise ones do not.
To fix this warning in other cases, the expressions were placed on
separate lines with the '&=' operator; however, this particular instance
was moved away from that so that it could be surrounded by LIKELY, which
is a macro for __builtin_expect(), to help with a performance
regression, according to upstream zstd pull #1973.
Aside from switching to logical operators, which is likely undesirable
in this instance, or disabling the warning outright, the solution is
casting one of the expressions to an integer type to make it clear to
clang that the author knows what they are doing. Add a cast to U32 to
silence the warning. The first U32 cast is to silence an instance of
-Wshorten-64-to-32 because __builtin_expect() returns long so it cannot
be moved.
Link: https://github.com/ClangBuiltLinux/linux/issues/1486
Link: https://github.com/facebook/zstd/pull/1973
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Upgrade to the latest upstream zstd version 1.4.10.
This patch is 100% generated from upstream zstd commit 20821a46f412 [0].
This patch is very large because it is transitioning from the custom
kernel zstd to using upstream directly. The new zstd follows upstreams
file structure which is different. Future update patches will be much
smaller because they will only contain the changes from one upstream
zstd release.
As an aid for review I've created a commit [1] that shows the diff
between upstream zstd as-is (which doesn't compile), and the zstd
code imported in this patch. The verion of zstd in this patch is
generated from upstream with changes applied by automation to replace
upstreams libc dependencies, remove unnecessary portability macros,
replace `/**` comments with `/*` comments, and use the kernel's xxhash
instead of bundling it.
The benefits of this patch are as follows:
1. Using upstream directly with automated script to generate kernel
code. This allows us to update the kernel every upstream release, so
the kernel gets the latest bug fixes and performance improvements,
and doesn't get 3 years out of date again. The automation and the
translated code are tested every upstream commit to ensure it
continues to work.
2. Upgrades from a custom zstd based on 1.3.1 to 1.4.10, getting 3 years
of performance improvements and bug fixes. On x86_64 I've measured
15% faster BtrFS and SquashFS decompression+read speeds, 35% faster
kernel decompression, and 30% faster ZRAM decompression+read speeds.
3. Zstd-1.4.10 supports negative compression levels, which allow zstd to
match or subsume lzo's performance.
4. Maintains the same kernel-specific wrapper API, so no callers have to
be modified with zstd version updates.
One concern that was brought up was stack usage. Upstream zstd had
already removed most of its heavy stack usage functions, but I just
removed the last functions that allocate arrays on the stack. I've
measured the high water mark for both compression and decompression
before and after this patch. Decompression is approximately neutral,
using about 1.2KB of stack space. Compression levels up to 3 regressed
from 1.4KB -> 1.6KB, and higher compression levels regressed from 1.5KB
-> 2KB. We've added unit tests upstream to prevent further regression.
I believe that this is a reasonable increase, and if it does end up
causing problems, this commit can be cleanly reverted, because it only
touches zstd.
I chose the bulk update instead of replaying upstream commits because
there have been ~3500 upstream commits since the 1.3.1 release, zstd
wasn't ready to be used in the kernel as-is before a month ago, and not
all upstream zstd commits build. The bulk update preserves bisectablity
because bugs can be bisected to the zstd version update. At that point
the update can be reverted, and we can work with upstream to find and
fix the bug.
Note that upstream zstd release 1.4.10 doesn't exist yet. I have cut a
staging branch at 20821a46f412 [0] and will apply any changes requested
to the staging branch. Once we're ready to merge this update I will cut
a zstd release at the commit we merge, so we have a known zstd release
in the kernel.
The implementation of the kernel API is contained in
zstd_compress_module.c and zstd_decompress_module.c.
[0] 20821a46f4
[1] e0fa481d0e
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
Adds decompress_sources.h which includes every .c file necessary for
zstd decompression. This is used in decompress_unzstd.c so the internal
structure of the library isn't exposed.
This allows us to upgrade the zstd library version without modifying any
callers. Instead we just need to update decompress_sources.h.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
This patch:
- Moves `include/linux/zstd.h` -> `include/linux/zstd_lib.h`
- Updates modified zstd headers to yearless copyright
- Adds a new API in `include/linux/zstd.h` that is functionally
equivalent to the in-use subset of the current API. Functions are
renamed to avoid symbol collisions with zstd, to make it clear it is
not the upstream zstd API, and to follow the kernel style guide.
- Updates all callers to use the new API.
There are no functional changes in this patch. Since there are no
functional change, I felt it was okay to update all the callers in a
single patch. Once the API is approved, the callers are mechanically
changed.
This patch is preparing for the 3rd patch in this series, which updates
zstd to version 1.4.10. Since the upstream zstd API is no longer exposed
to callers, the update can happen transparently.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of
letting the code fall through to the next case, and by replacing a
number of /* fall through */ comments with the new pseudo-keyword
macro fallthrough.
Notice that Clang doesn't recognize /* Fall through */ comments as
implicit fall-through markings.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
This reverts commit 6a9dc5fd61 ("lib: Revert use of fallthrough
pseudo-keyword in lib/")
Now that we can build arch/powerpc/boot/ free of -Wimplicit-fallthrough,
re-enable these fixes for lib/.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/236
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
The following build error for powerpc64 was reported by Nathan Chancellor:
"$ scripts/config --file arch/powerpc/configs/powernv_defconfig -e KERNEL_XZ
$ make -skj"$(nproc)" ARCH=powerpc CROSS_COMPILE=powerpc64le-linux- distclean powernv_defconfig zImage
...
In file included from arch/powerpc/boot/../../../lib/decompress_unxz.c:234,
from arch/powerpc/boot/decompress.c:38:
arch/powerpc/boot/../../../lib/xz/xz_dec_stream.c: In function 'dec_main':
arch/powerpc/boot/../../../lib/xz/xz_dec_stream.c:586:4: error: 'fallthrough' undeclared (first use in this function)
586 | fallthrough;
| ^~~~~~~~~~~
This will end up affecting distribution configurations such as Debian
and OpenSUSE according to my testing. I am not sure what the solution
is, the PowerPC wrapper does not set -D__KERNEL__ so I am not sure
that compiler_attributes.h can be safely included."
In order to avoid these sort of problems, it seems that the best
solution is to use /* fall through */ comments instead of the
fallthrough pseudo-keyword macro in lib/, for now.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Fixes: df561f6688 ("treewide: Use fallthrough pseudo-keyword")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These changes are necessary to get the build to work in the preboot
environment, and to get reasonable performance:
- Remove a double definition of the CHECK_F macro when the zstd
library is amalgamated.
- Switch ZSTD_copy8() to __builtin_memcpy(), because in the preboot
environment on x86 gcc can't inline `memcpy()` otherwise.
- Limit the gcc hack in ZSTD_wildcopy() to the broken gcc version. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81388.
ZSTD_copy8() and ZSTD_wildcopy() are in the core of the zstd hot loop.
So outlining these calls to memcpy(), and having an extra branch are very
detrimental to performance.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-2-nickrterrell@gmail.com
Currently, compiler_types.h #defines __inline as inline (and further
#defines inline to automatically attach some attributes), so this does
not change functionality. It serves as preparation for removing the
#define of __inline.
While at it, also remove the __attribute__((unused)) - it's already
included in the definition of the inline macro, and "open-coded"
__attribute__(()) should be avoided.
Since commit a95b37e20d (kbuild: get <linux/compiler_types.h> out of
<linux/kconfig.h>), compiler_types.h is automatically included by all
kernel C code - i.e., the definition of inline including the unused
attribute is guaranteed to be in effect whenever ZSTD_STATIC is
expanded.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
lib/zstd/bitstream.h:261:30: warning: this statement may fall through [-Wimplicit-fallthrough=]
lib/zstd/bitstream.h:262:30: warning: this statement may fall through [-Wimplicit-fallthrough=]
lib/zstd/bitstream.h:263:30: warning: this statement may fall through [-Wimplicit-fallthrough=]
lib/zstd/bitstream.h:264:30: warning: this statement may fall through [-Wimplicit-fallthrough=]
lib/zstd/bitstream.h:265:30: warning: this statement may fall through [-Wimplicit-fallthrough=]
lib/zstd/compress.c:3183:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
lib/zstd/decompress.c:1770:18: warning: this statement may fall through [-Wimplicit-fallthrough=]
lib/zstd/decompress.c:2376:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
lib/zstd/decompress.c:2404:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
lib/zstd/decompress.c:2435:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
lib/zstd/huf_compress.c: In function ‘HUF_compress1X_usingCTable’:
lib/zstd/huf_compress.c:535:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (sizeof((stream)->bitContainer) * 8 < HUF_TABLELOG_MAX * 4 + 7) \
^
lib/zstd/huf_compress.c:558:54: note: in expansion of macro ‘HUF_FLUSHBITS_2’
case 3: HUF_encodeSymbol(&bitC, ip[n + 2], CTable); HUF_FLUSHBITS_2(&bitC);
^~~~~~~~~~~~~~~
lib/zstd/huf_compress.c:559:2: note: here
case 2: HUF_encodeSymbol(&bitC, ip[n + 1], CTable); HUF_FLUSHBITS_1(&bitC);
^~~~
lib/zstd/huf_compress.c:531:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (sizeof((stream)->bitContainer) * 8 < HUF_TABLELOG_MAX * 2 + 7) \
^
lib/zstd/huf_compress.c:559:54: note: in expansion of macro ‘HUF_FLUSHBITS_1’
case 2: HUF_encodeSymbol(&bitC, ip[n + 1], CTable); HUF_FLUSHBITS_1(&bitC);
^~~~~~~~~~~~~~~
lib/zstd/huf_compress.c:560:2: note: here
case 1: HUF_encodeSymbol(&bitC, ip[n + 0], CTable); HUF_FLUSHBITS(&bitC);
^~~~
AR lib/zstd//built-in.a
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Now, Kbuild nicely handles composite objects to avoid multiple
definition.
Makefiles can simply add the same objects multiple times across
composite objects.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add zstd compression and decompression kernel modules.
zstd offers a wide varity of compression speed and quality trade-offs.
It can compress at speeds approaching lz4, and quality approaching lzma.
zstd decompressions at speeds more than twice as fast as zlib, and
decompression speed remains roughly the same across all compression levels.
The code was ported from the upstream zstd source repository. The
`linux/zstd.h` header was modified to match linux kernel style.
The cross-platform and allocation code was stripped out. Instead zstd
requires the caller to pass a preallocated workspace. The source files
were clang-formatted [1] to match the Linux Kernel style as much as
possible. Otherwise, the code was unmodified. We would like to avoid
as much further manual modification to the source code as possible, so it
will be easier to keep the kernel zstd up to date.
I benchmarked zstd compression as a special character device. I ran zstd
and zlib compression at several levels, as well as performing no
compression, which measure the time spent copying the data to kernel space.
Data is passed to the compresser 4096 B at a time. The benchmark file is
located in the upstream zstd source repository under
`contrib/linux-kernel/zstd_compress_test.c` [2].
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD. I benchmarked using `silesia.tar` [3], which is
211,988,480 B large. Run the following commands for the benchmark:
sudo modprobe zstd_compress_test
sudo mknod zstd_compress_test c 245 0
sudo cp silesia.tar zstd_compress_test
The time is reported by the time of the userland `cp`.
The MB/s is computed with
1,536,217,008 B / time(buffer size, hash)
which includes the time to copy from userland.
The Adjusted MB/s is computed with
1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)).
The memory reported is the amount of memory the compressor requests.
| Method | Size (B) | Time (s) | Ratio | MB/s | Adj MB/s | Mem (MB) |
|----------|----------|----------|-------|---------|----------|----------|
| none | 11988480 | 0.100 | 1 | 2119.88 | - | - |
| zstd -1 | 73645762 | 1.044 | 2.878 | 203.05 | 224.56 | 1.23 |
| zstd -3 | 66988878 | 1.761 | 3.165 | 120.38 | 127.63 | 2.47 |
| zstd -5 | 65001259 | 2.563 | 3.261 | 82.71 | 86.07 | 2.86 |
| zstd -10 | 60165346 | 13.242 | 3.523 | 16.01 | 16.13 | 13.22 |
| zstd -15 | 58009756 | 47.601 | 3.654 | 4.45 | 4.46 | 21.61 |
| zstd -19 | 54014593 | 102.835 | 3.925 | 2.06 | 2.06 | 60.15 |
| zlib -1 | 77260026 | 2.895 | 2.744 | 73.23 | 75.85 | 0.27 |
| zlib -3 | 72972206 | 4.116 | 2.905 | 51.50 | 52.79 | 0.27 |
| zlib -6 | 68190360 | 9.633 | 3.109 | 22.01 | 22.24 | 0.27 |
| zlib -9 | 67613382 | 22.554 | 3.135 | 9.40 | 9.44 | 0.27 |
I benchmarked zstd decompression using the same method on the same machine.
The benchmark file is located in the upstream zstd repo under
`contrib/linux-kernel/zstd_decompress_test.c` [4]. The memory reported is
the amount of memory required to decompress data compressed with the given
compression level. If you know the maximum size of your input, you can
reduce the memory usage of decompression irrespective of the compression
level.
| Method | Time (s) | MB/s | Adjusted MB/s | Memory (MB) |
|----------|----------|---------|---------------|-------------|
| none | 0.025 | 8479.54 | - | - |
| zstd -1 | 0.358 | 592.15 | 636.60 | 0.84 |
| zstd -3 | 0.396 | 535.32 | 571.40 | 1.46 |
| zstd -5 | 0.396 | 535.32 | 571.40 | 1.46 |
| zstd -10 | 0.374 | 566.81 | 607.42 | 2.51 |
| zstd -15 | 0.379 | 559.34 | 598.84 | 4.61 |
| zstd -19 | 0.412 | 514.54 | 547.77 | 8.80 |
| zlib -1 | 0.940 | 225.52 | 231.68 | 0.04 |
| zlib -3 | 0.883 | 240.08 | 247.07 | 0.04 |
| zlib -6 | 0.844 | 251.17 | 258.84 | 0.04 |
| zlib -9 | 0.837 | 253.27 | 287.64 | 0.04 |
Tested in userland using the test-suite in the zstd repo under
`contrib/linux-kernel/test/UserlandTest.cpp` [5] by mocking the kernel
functions. Fuzz tested using libfuzzer [6] with the fuzz harnesses under
`contrib/linux-kernel/test/{RoundTripCrash.c,DecompressCrash.c}` [7] [8]
with ASAN, UBSAN, and MSAN. Additionaly, it was tested while testing the
BtrFS and SquashFS patches coming next.
[1] https://clang.llvm.org/docs/ClangFormat.html
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/zstd_compress_test.c
[3] http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia
[4] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/zstd_decompress_test.c
[5] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/UserlandTest.cpp
[6] http://llvm.org/docs/LibFuzzer.html
[7] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/RoundTripCrash.c
[8] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/DecompressCrash.c
zstd source repository: https://github.com/facebook/zstd
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
