Commit Graph

95 Commits

Author SHA1 Message Date
Daeho Jeong
b47820edd1 ext4: avoid modifying checksum fields directly during checksum verification
We temporally change checksum fields in buffers of some types of
metadata into '0' for verifying the checksum values. By doing this
without locking the buffer, some metadata's checksums, which are
being committed or written back to the storage, could be damaged.
In our test, several metadata blocks were found with damaged metadata
checksum value during recovery process. When we only verify the
checksum value, we have to avoid modifying checksum fields directly.

Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2016-07-03 17:51:39 -04:00
Theodore Ts'o
9e92f48c34 ext4: check if in-inode xattr is corrupted in ext4_expand_extra_isize_ea()
We aren't checking to see if the in-inode extended attribute is
corrupted before we try to expand the inode's extra isize fields.

This can lead to potential crashes caused by the BUG_ON() check in
ext4_xattr_shift_entries().

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-03-22 16:13:15 -04:00
Andreas Gruenbacher
6048c64b26 mbcache: add reusable flag to cache entries
To reduce amount of damage caused by single bad block, we limit number
of inodes sharing an xattr block to 1024. Thus there can be more xattr
blocks with the same contents when there are lots of files with the same
extended attributes. These xattr blocks naturally result in hash
collisions and can form long hash chains and we unnecessarily check each
such block only to find out we cannot use it because it is already
shared by too many inodes.

Add a reusable flag to cache entries which is cleared when a cache entry
has reached its maximum refcount.  Cache entries which are not marked
reusable are skipped by mb_cache_entry_find_{first,next}. This
significantly speeds up mbcache when there are many same xattr blocks.
For example for xattr-bench with 5 values and each process handling
20000 files, the run for 64 processes is 25x faster with this patch.
Even for 8 processes the speedup is almost 3x. We have also verified
that for situations where there is only one xattr block of each kind,
the patch doesn't have a measurable cost.

[JK: Remove handling of setting the same value since it is not needed
anymore, check for races in e_reusable setting, improve changelog,
add measurements]

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22 22:44:04 -05:00
Jan Kara
3fd164629d ext4: shortcut setting of xattr to the same value
When someone tried to set xattr to the same value (i.e., not changing
anything) we did all the work of removing original xattr, possibly
breaking references to shared xattr block, inserting new xattr, and
merging xattr blocks again. Since this is not so rare operation and it
is relatively cheap for us to detect this case, check for this and
shortcut xattr setting in that case.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22 22:43:04 -05:00
Jan Kara
7a2508e1b6 mbcache2: rename to mbcache
Since old mbcache code is gone, let's rename new code to mbcache since
number 2 is now meaningless. This is just a mechanical replacement.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22 22:35:22 -05:00
Jan Kara
82939d7999 ext4: convert to mbcache2
The conversion is generally straightforward. The only tricky part is
that xattr block corresponding to found mbcache entry can get freed
before we get buffer lock for that block. So we have to check whether
the entry is still valid after getting buffer lock.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-22 11:50:13 -05:00
Linus Torvalds
33caf82acf Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
 "All kinds of stuff.  That probably should've been 5 or 6 separate
  branches, but by the time I'd realized how large and mixed that bag
  had become it had been too close to -final to play with rebasing.

  Some fs/namei.c cleanups there, memdup_user_nul() introduction and
  switching open-coded instances, burying long-dead code, whack-a-mole
  of various kinds, several new helpers for ->llseek(), assorted
  cleanups and fixes from various people, etc.

  One piece probably deserves special mention - Neil's
  lookup_one_len_unlocked().  Similar to lookup_one_len(), but gets
  called without ->i_mutex and tries to avoid ever taking it.  That, of
  course, means that it's not useful for any directory modifications,
  but things like getting inode attributes in nfds readdirplus are fine
  with that.  I really should've asked for moratorium on lookup-related
  changes this cycle, but since I hadn't done that early enough...  I
  *am* asking for that for the coming cycle, though - I'm going to try
  and get conversion of i_mutex to rwsem with ->lookup() done under lock
  taken shared.

  There will be a patch closer to the end of the window, along the lines
  of the one Linus had posted last May - mechanical conversion of
  ->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
  inode_is_locked()/inode_lock_nested().  To quote Linus back then:

    -----
    |    This is an automated patch using
    |
    |        sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
    |        sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
    |        sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[     ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
    |        sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
    |        sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
    |
    |    with a very few manual fixups
    -----

  I'm going to send that once the ->i_mutex-affecting stuff in -next
  gets mostly merged (or when Linus says he's about to stop taking
  merges)"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  nfsd: don't hold i_mutex over userspace upcalls
  fs:affs:Replace time_t with time64_t
  fs/9p: use fscache mutex rather than spinlock
  proc: add a reschedule point in proc_readfd_common()
  logfs: constify logfs_block_ops structures
  fcntl: allow to set O_DIRECT flag on pipe
  fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
  fs: xattr: Use kvfree()
  [s390] page_to_phys() always returns a multiple of PAGE_SIZE
  nbd: use ->compat_ioctl()
  fs: use block_device name vsprintf helper
  lib/vsprintf: add %*pg format specifier
  fs: use gendisk->disk_name where possible
  poll: plug an unused argument to do_poll
  amdkfd: don't open-code memdup_user()
  cdrom: don't open-code memdup_user()
  rsxx: don't open-code memdup_user()
  mtip32xx: don't open-code memdup_user()
  [um] mconsole: don't open-code memdup_user_nul()
  [um] hostaudio: don't open-code memdup_user()
  ...
2016-01-12 17:11:47 -08:00
Dmitry Monakhov
a1c6f05733 fs: use block_device name vsprintf helper
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-06 13:03:18 -05:00
Andreas Gruenbacher
764a5c6b1f xattr handlers: Simplify list operation
Change the list operation to only return whether or not an attribute
should be listed.  Copying the attribute names into the buffer is moved
to the callers.

Since the result only depends on the dentry and not on the attribute
name, we do not pass the attribute name to list operations.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-13 19:46:12 -05:00
Andreas Gruenbacher
d9a82a0403 xattr handlers: Pass handler to operations instead of flags
The xattr_handler operations are currently all passed a file system
specific flags value which the operations can use to disambiguate between
different handlers; some file systems use that to distinguish the xattr
namespace, for example.  In some oprations, it would be useful to also have
access to the handler prefix.  To allow that, pass a pointer to the handler
to operations instead of the flags value alone.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13 20:34:32 -05:00
Darrick J. Wong
e2b911c535 ext4: clean up feature test macros with predicate functions
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros.  Furthermore, clean out the
places where we open-coded feature tests.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2015-10-17 16:18:43 -04:00
Darrick J. Wong
6a797d2737 ext4: call out CRC and corruption errors with specific error codes
Instead of overloading EIO for CRC errors and corrupt structures,
return the same error codes that XFS returns for the same issues.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-10-17 16:16:04 -04:00
Linus Torvalds
9ec3a646fe Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fourth vfs update from Al Viro:
 "d_inode() annotations from David Howells (sat in for-next since before
  the beginning of merge window) + four assorted fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RCU pathwalk breakage when running into a symlink overmounting something
  fix I_DIO_WAKEUP definition
  direct-io: only inc/dec inode->i_dio_count for file systems
  fs/9p: fix readdir()
  VFS: assorted d_backing_inode() annotations
  VFS: fs/inode.c helpers: d_inode() annotations
  VFS: fs/cachefiles: d_backing_inode() annotations
  VFS: fs library helpers: d_inode() annotations
  VFS: assorted weird filesystems: d_inode() annotations
  VFS: normal filesystems (and lustre): d_inode() annotations
  VFS: security/: d_inode() annotations
  VFS: security/: d_backing_inode() annotations
  VFS: net/: d_inode() annotations
  VFS: net/unix: d_backing_inode() annotations
  VFS: kernel/: d_inode() annotations
  VFS: audit: d_backing_inode() annotations
  VFS: Fix up some ->d_inode accesses in the chelsio driver
  VFS: Cachefiles should perform fs modifications on the top layer only
  VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-26 17:22:07 -07:00
David Howells
2b0143b5c9 VFS: normal filesystems (and lustre): d_inode() annotations
that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:57 -04:00
Wei Yuan
5f80f62ada ext4: remove useless condition in if statement.
In this if statement, the previous condition is useless, the later one
has covered it.

Signed-off-by: Weiyuan <weiyuan.wei@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2015-04-02 23:50:48 -04:00
Sheng Yong
72b8e0f9fa ext4: remove unused header files
Remove unused header files and header files which are included in
ext4.h.

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-04-02 23:47:42 -04:00
Dmitry Monakhov
9aa5d32ba2 ext4: Replace open coded mdata csum feature to helper function
Besides the fact that this replacement improves code readability
it also protects from errors caused direct EXT4_S(sb)->s_es manipulation
which may result attempt to use uninitialized  csum machinery.

#Testcase_BEGIN
IMG=/dev/ram0
MNT=/mnt
mkfs.ext4 $IMG
mount $IMG $MNT
#Enable feature directly on disk, on mounted fs
tune2fs -O metadata_csum  $IMG
# Provoke metadata update, likey result in OOPS
touch $MNT/test
umount $MNT
#Testcase_END

# Replacement script
@@
expression E;
@@
- EXT4_HAS_RO_COMPAT_FEATURE(E, EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)
+ ext4_has_metadata_csum(E)

https://bugzilla.kernel.org/show_bug.cgi?id=82201

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-10-13 03:36:16 -04:00
Darrick J. Wong
a0626e7595 ext4: check EA value offset when loading
When loading extended attributes, check each entry's value offset to
make sure it doesn't collide with the entries.

Without this check it is easy to crash the kernel by mounting a
malicious FS containing a file with an EA wherein e_value_offs = 0 and
e_value_size > 0 and then deleting the EA, which corrupts the name
list.

(See the f_ea_value_crash test's FS image in e2fsprogs for an example.)

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-09-16 14:34:59 -04:00
Theodore Ts'o
e3cf5d5d9a ext4: prepare to drop EXT4_STATE_DELALLOC_RESERVED
The EXT4_STATE_DELALLOC_RESERVED flag was originally implemented
because it was too hard to make sure the mballoc and get_block flags
could be reliably passed down through all of the codepaths that end up
calling ext4_mb_new_blocks().

Since then, we have mb_flags passed down through most of the code
paths, so getting rid of EXT4_STATE_DELALLOC_RESERVED isn't as tricky
as it used to.

This commit plumbs in the last of what is required, and then adds a
WARN_ON check to make sure we haven't missed anything.  If this passes
a full regression test run, we can then drop
EXT4_STATE_DELALLOC_RESERVED.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2014-09-04 18:07:25 -04:00
liang xie
5d60125530 ext4: add missing BUFFER_TRACE before ext4_journal_get_write_access
Make them more consistently

Signed-off-by: xieliang <xieliang@xiaomi.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 22:06:43 -04:00
Lukas Czerner
c8b459f492 ext4: remove unnecessary double parentheses
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 12:55:07 -04:00
Zhang Zhen
230b8c1a7b ext4: avoid unneeded lookup when xattr name is invalid
In ext4_xattr_set_handle() we have checked the xattr name's length. So
we should also check it in ext4_xattr_get() to avoid unneeded lookup
caused by invalid name.

Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 09:57:59 -04:00
Jan Kara
ec4cb1aa2b ext4: fix jbd2 warning under heavy xattr load
When heavily exercising xattr code the assertion that
jbd2_journal_dirty_metadata() shouldn't return error was triggered:

WARNING: at /srv/autobuild-ceph/gitbuilder.git/build/fs/jbd2/transaction.c:1237
jbd2_journal_dirty_metadata+0x1ba/0x260()

CPU: 0 PID: 8877 Comm: ceph-osd Tainted: G    W 3.10.0-ceph-00049-g68d04c9 #1
Hardware name: Dell Inc. PowerEdge R410/01V648, BIOS 1.6.3 02/07/2011
 ffffffff81a1d3c8 ffff880214469928 ffffffff816311b0 ffff880214469968
 ffffffff8103fae0 ffff880214469958 ffff880170a9dc30 ffff8802240fbe80
 0000000000000000 ffff88020b366000 ffff8802256e7510 ffff880214469978
Call Trace:
 [<ffffffff816311b0>] dump_stack+0x19/0x1b
 [<ffffffff8103fae0>] warn_slowpath_common+0x70/0xa0
 [<ffffffff8103fb2a>] warn_slowpath_null+0x1a/0x20
 [<ffffffff81267c2a>] jbd2_journal_dirty_metadata+0x1ba/0x260
 [<ffffffff81245093>] __ext4_handle_dirty_metadata+0xa3/0x140
 [<ffffffff812561f3>] ext4_xattr_release_block+0x103/0x1f0
 [<ffffffff81256680>] ext4_xattr_block_set+0x1e0/0x910
 [<ffffffff8125795b>] ext4_xattr_set_handle+0x38b/0x4a0
 [<ffffffff810a319d>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff81257b32>] ext4_xattr_set+0xc2/0x140
 [<ffffffff81258547>] ext4_xattr_user_set+0x47/0x50
 [<ffffffff811935ce>] generic_setxattr+0x6e/0x90
 [<ffffffff81193ecb>] __vfs_setxattr_noperm+0x7b/0x1c0
 [<ffffffff811940d4>] vfs_setxattr+0xc4/0xd0
 [<ffffffff8119421e>] setxattr+0x13e/0x1e0
 [<ffffffff811719c7>] ? __sb_start_write+0xe7/0x1b0
 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60
 [<ffffffff8118c65c>] ? fget_light+0x3c/0x130
 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60
 [<ffffffff8118f1f8>] ? __mnt_want_write+0x58/0x70
 [<ffffffff811946be>] SyS_fsetxattr+0xbe/0x100
 [<ffffffff816407c2>] system_call_fastpath+0x16/0x1b

The reason for the warning is that buffer_head passed into
jbd2_journal_dirty_metadata() didn't have journal_head attached. This is
caused by the following race of two ext4_xattr_release_block() calls:

CPU1                                CPU2
ext4_xattr_release_block()          ext4_xattr_release_block()
lock_buffer(bh);
/* False */
if (BHDR(bh)->h_refcount == cpu_to_le32(1))
} else {
  le32_add_cpu(&BHDR(bh)->h_refcount, -1);
  unlock_buffer(bh);
                                    lock_buffer(bh);
                                    /* True */
                                    if (BHDR(bh)->h_refcount == cpu_to_le32(1))
                                      get_bh(bh);
                                      ext4_free_blocks()
                                        ...
                                        jbd2_journal_forget()
                                          jbd2_journal_unfile_buffer()
                                          -> JH is gone
  error = ext4_handle_dirty_xattr_block(handle, inode, bh);
  -> triggers the warning

We fix the problem by moving ext4_handle_dirty_xattr_block() under the
buffer lock. Sadly this cannot be done in nojournal mode as that
function can call sync_dirty_buffer() which would deadlock. Luckily in
nojournal mode the race is harmless (we only dirty already freed buffer)
and thus for nojournal mode we leave the dirtying outside of the buffer
lock.

Reported-by: Sage Weil <sage@inktank.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-04-07 10:54:21 -04:00
T Makphaibulchoke
9c191f701c ext4: each filesystem creates and uses its own mb_cache
This patch adds new interfaces to create and destory cache,
ext4_xattr_create_cache() and ext4_xattr_destroy_cache(), and remove
the cache creation and destory calls from ex4_init_xattr() and
ext4_exitxattr() in fs/ext4/xattr.c.

fs/ext4/super.c has been changed so that when a filesystem is mounted
a cache is allocated and attched to its ext4_sb_info structure.

fs/mbcache.c has been changed so that only one slab allocator is
allocated and used by all mbcache structures.

Signed-off-by: T. Makphaibulchoke <tmac@hp.com>
2014-03-18 19:24:49 -04:00
Theodore Ts'o
7b1b2c1b9c ext4: don't calculate total xattr header size unless needed
The function ext4_expand_extra_isize_ea() doesn't need the size of all
of the extended attribute headers.  So if we don't calculate it when
it is unneeded, it we can skip some undeeded memory references, and as
a bonus, we eliminate some kvetching by static code analysis tools.

Addresses-Coverity-Id: #741291

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-02-19 20:15:21 -05:00
Christoph Hellwig
64e178a711 ext2/3/4: use generic posix ACL infrastructure
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-25 23:58:19 -05:00
Theodore Ts'o
dcb9917ba0 ext4: avoid bh leak in retry path of ext4_expand_extra_isize_ea()
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2013-10-31 23:00:24 -04:00
Dave Jones
6e4ea8e33b ext4: fix memory leak in xattr
If we take the 2nd retry path in ext4_expand_extra_isize_ea, we
potentionally return from the function without having freed these
allocations.  If we don't do the return, we over-write the previous
allocation pointers, so we leak either way.

Spotted with Coverity.

[ Fixed by tytso to set is and bs to NULL after freeing these
  pointers, in case in the retry loop we later end up triggering an
  error causing a jump to cleanup, at which point we could have a double
  free bug. -- Ted ]

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable@vger.kernel.org
2013-10-12 14:39:49 -04:00
Theodore Ts'o
d6a771056b ext4: fix miscellaneous big endian warnings
None of these result in any bug, but they makes sparse complain.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-09 23:59:55 -04:00
Lukas Czerner
1231b3a1eb ext4: fix xattr block allocation/release with bigalloc
Currently when new xattr block is created or released we we would call
dquot_free_block() or dquot_alloc_block() respectively, among the else
decrementing or incrementing the number of blocks assigned to the
inode by one block.

This however does not work for bigalloc file system because we always
allocate/free the whole cluster so we have to count with that in
dquot_free_block() and dquot_alloc_block() as well.

Use the clusters-to-blocks conversion EXT4_C2B() when passing number of
blocks to the dquot_alloc/free functions to fix the problem.

The problem has been revealed by xfstests #117 (and possibly others).

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable@vger.kernel.org
2013-02-18 12:12:07 -05:00
Theodore Ts'o
95eaefbdec ext4: fix the number of credits needed for acl ops with inline data
Operations which modify extended attributes may need extra journal
credits if inline data is used, since there is a chance that some
extended attributes may need to get pushed to an external attribute
block.

Changes to reflect this was made in xattr.c, but they were missed in
fs/ext4/acl.c.  To fix this, abstract the calculation of the number of
credits needed for xattr operations to an inline function defined in
ext4_jbd2.h, and use it in acl.c and xattr.c.

Also move the function declarations used in inline.c from xattr.h
(where they are non-obviously hidden, and caused problems since
ext4_jbd2.h needs to use the function ext4_has_inline_data), and move
them to ext4.h.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Tao Ma <boyu.mt@taobao.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2013-02-09 15:23:03 -05:00
Theodore Ts'o
9924a92a8c ext4: pass context information to jbd2__journal_start()
So we can better understand what bits of ext4 are responsible for
long-running jbd2 handles, use jbd2__journal_start() so we can pass
context information for logging purposes.

The recommended way for finding the longer-running handles is:

   T=/sys/kernel/debug/tracing
   EVENT=$T/events/jbd2/jbd2_handle_stats
   echo "interval > 5" > $EVENT/filter
   echo 1 > $EVENT/enable

   ./run-my-fs-benchmark

   cat $T/trace > /tmp/problem-handles

This will list handles that were active for longer than 20ms.  Having
longer-running handles is bad, because a commit started at the wrong
time could stall for those 20+ milliseconds, which could delay an
fsync() or an O_SYNC operation.  Here is an example line from the
trace file describing a handle which lived on for 311 jiffies, or over
1.2 seconds:

postmark-2917  [000] ....   196.435786: jbd2_handle_stats: dev 254,32 
   tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1
   dirtied_blocks 0

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-08 21:59:22 -05:00
Wang Shilong
aebf02430d ext4: use unlikely to improve the efficiency of the kernel
Because the function 'sb_getblk' seldomly fails to return NULL
value,it will be better to use 'unlikely' to optimize it.

Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-01-12 16:28:47 -05:00
Theodore Ts'o
860d21e2c5 ext4: return ENOMEM if sb_getblk() fails
The only reason for sb_getblk() failing is if it can't allocate the
buffer_head.  So ENOMEM is more appropriate than EIO.  In addition,
make sure that the file system is marked as being inconsistent if
sb_getblk() fails.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2013-01-12 16:19:36 -05:00
Theodore Ts'o
bd9926e803 ext4: zero out inline data using memset() instead of empty_zero_page
Not all architectures (in particular, sparc64) have empty_zero_page.
So instead of copying from empty_zero_page, use memset to clear the
inline data by signalling to ext4_xattr_set_entry() via a magic
pointer value, EXT4_ZERO_ATTR_VALUE, which is defined by casting -1 to
a pointer.

This fixes a build failure on sparc64, and the memset() should be more
efficient than using memcpy() anyway.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-11 03:31:49 -05:00
Tao Ma
0d812f77b3 ext4: evict inline data out if we need to strore xattr in inode
Now we that store data in the inode, in case we need to store some
xattrs and inode doesn't have enough space, Andreas suggested that we
should keep the xattr(metadata) in and data should be pushed out.  So
this patch does the work.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
Tao Ma
879b38257b ext4: export inline xattr functions
The inline data feature will need some inline xattr functions, so
export them from fs/ext4/xattr.c so that inline.c can use them.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-05 10:28:46 -05:00
Eric Sandeen
37be2f59d3 ext4: remove ext4_handle_release_buffer()
ext4_handle_release_buffer() was intended to remove journal
write access from a buffer, but it doesn't actually do anything
at all other than add a BUFFER_TRACE point, but it's not reliably
used for that either.  Remove all the associated dead code.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2012-11-08 11:22:46 -05:00
Tao Ma
41eb70dde4 ext4: use s_csum_seed instead of i_csum_seed for xattr block
In xattr block operation, we use h_refcount to indicate whether the
xattr block is shared among many inodes. And xattr block csum uses
s_csum_seed if it is shared and i_csum_seed if it belongs to
one inode. But this has a problem. So consider the block is shared
first bewteen inode A and B, and B has some xattr update and CoW
the xattr block. When it updates the *old* xattr block(because
of the h_refcount change) and calls ext4_xattr_release_block, we
has no idea that inode A is the real owner of the *old* xattr
block and we can't use the i_csum_seed of inode A either in xattr
block csum calculation. And I don't think we have an easy way to
find inode A.

So this patch just removes the tricky i_csum_seed and we now uses
s_csum_seed every time for the xattr block csum. The corresponding
patch for the e2fsprogs will be sent in another patch.

This is spotted by xfstests 117.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Darrick J. Wong <djwong@us.ibm.com>
2012-07-09 16:29:27 -04:00
Darrick J. Wong
cc8e94fd12 ext4: Calculate and verify checksums of extended attribute blocks
Calculate and verify the checksums of extended attribute blocks.  This
only applies to separate EA blocks that are pointed to by
inode->i_file_acl (i.e.  external EA blocks); the checksum lives in
the EA header.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-04-29 18:43:10 -04:00
Joe Perches
ace36ad431 ext4: add no_printk argument validation, fix fallout
Add argument validation to debug functions.
Use ##__VA_ARGS__.

Fix format and argument mismatches.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-19 23:11:43 -04:00
Eric Sandeen
c1bb05a657 ext4: avoid deadlock on sync-mounted FS w/o journal
Processes hang forever on a sync-mounted ext2 file system that
is mounted with the ext4 module (default in Fedora 16).

I can reproduce this reliably by mounting an ext2 partition with
"-o sync" and opening a new file an that partition with vim. vim
will hang in "D" state forever.  The same happens on ext4 without
a journal.

I am attaching a small patch here that solves this issue for me.
In the sync mounted case without a journal,
ext4_handle_dirty_metadata() may call sync_dirty_buffer(), which
can't be called with buffer lock held.

Also move mb_cache_entry_release inside lock to avoid race
fixed previously by 8a2bfdcb ext[34]: EA block reference count racing fix
Note too that ext2 fixed this same problem in 2006 with
b2f49033 [PATCH] fix deadlock in ext2

Signed-off-by: Martin.Wilck@ts.fujitsu.com
[sandeen@redhat.com: move mb_cache_entry_release before unlock, edit commit msg]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-02-20 23:06:18 -05:00
Zheng Liu
f1b3a2a753 ext4: remove unneeded variable in ext4_xattr_check_block()
We could return directly from ext4_xattr_check_block(). Thus, we
shouldn't need to define a 'error' variable.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-02-20 17:53:05 -05:00
Eric Sandeen
6d6a435190 ext4: fix race in xattr block allocation path
Ceph users reported that when using Ceph on ext4, the filesystem
would often become corrupted, containing inodes with incorrect
i_blocks counters.

I managed to reproduce this with a very hacked-up "streamtest"
binary from the Ceph tree.

Ceph is doing a lot of xattr writes, to out-of-inode blocks.
There is also another thread which does sync_file_range and close,
of the same files.  The problem appears to happen due to this race:

sync/flush thread               xattr-set thread
-----------------               ----------------

do_writepages                   ext4_xattr_set
ext4_da_writepages              ext4_xattr_set_handle
mpage_da_map_blocks             ext4_xattr_block_set
        set DELALLOC_RESERVE
                                ext4_new_meta_blocks
                                        ext4_mb_new_blocks
                                                if (!i_delalloc_reserved_flag)
                                                        vfs_dq_alloc_block
ext4_get_blocks
	down_write(i_data_sem)
        set i_delalloc_reserved_flag
	...
	up_write(i_data_sem)
                                        if (i_delalloc_reserved_flag)
                                                vfs_dq_alloc_block_nofail


In other words, the sync/flush thread pops in and sets
i_delalloc_reserved_flag on the inode, which makes the xattr thread
think that it's in a delalloc path in ext4_new_meta_blocks(),
and add the block for a second time, after already having added
it once in the !i_delalloc_reserved_flag case in ext4_mb_new_blocks

The real problem is that we shouldn't be using the DELALLOC_RESERVED
state flag, and instead we should be passing
EXT4_GET_BLOCKS_DELALLOC_RESERVE down to ext4_map_blocks() instead of
using an inode state flag.  We'll fix this for now with using
i_data_sem to prevent this race, but this is really not the right way
to fix things.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2011-10-29 10:15:35 -04:00
Eric Sandeen
665436175c ext4: use ext4_reserve_inode_write in ext4_xattr_set_handle
ext4_mark_iloc_dirty() says:

 * The caller must have previously called ext4_reserve_inode_write().
 * Give this, we know that the caller already has write access to iloc->bh.

ext4_xattr_set_handle, however, just open-codes it.  May as well use
the helper function for consistency.

No bug here, just tidiness.

(Note: on cleanup path, ext4_reserve_inode_write sets
the bh to NULL if it returns an error, and brelse() of 
a null bh is handled gracefully).

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-26 03:32:07 -04:00
Allison Henderson
55f020db66 ext4: add flag to ext4_has_free_blocks
This patch adds an allocation request flag to the ext4_has_free_blocks
function which enables the use of reserved blocks.  This will allow a
punch hole to proceed even if the disk is full.  Punching a hole may
require additional blocks to first split the extents.

Because ext4_has_free_blocks is a low level function, the flag needs
to be passed down through several functions listed below:

ext4_ext_insert_extent
ext4_ext_create_new_leaf
ext4_ext_grow_indepth
ext4_ext_split
ext4_ext_new_meta_block
ext4_mb_new_blocks
ext4_claim_free_blocks
ext4_has_free_blocks

[ext4 punch hole patch series 1/5 v7]

Signed-off-by: Allison Henderson <achender@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
2011-05-25 07:41:26 -04:00
Amir Goldstein
537a03103c ext4: unify the ext4_handle_release_buffer() api
There are two wrapper functions which do exactly the same thing:
ext4_journal_release_buffer(), and ext4_handle_release_buffer().  In
addition, ext4_xattr_block_set() calls jbd2_journal_release_buffer()
directly.

Unify all of the code to use ext4_handle_release_buffer(), and get rid
of ext4_journal_release_buffer().

Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-03-20 22:57:02 -04:00
Peter Huewe
7dc576158d ext4: Fix sparse warning: Using plain integer as NULL pointer
This patch fixes the warning "Using plain integer as NULL pointer",
generated by sparse, by replacing the offending 0s with NULL.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-21 21:01:42 -05:00
Wang Sheng-Hui
6e9510b0e0 ext2,ext3,ext4: clarify comment for extN_xattr_set_handle
Signed-off-by: Wang Sheng-Hui <crosslonelyover@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10 12:10:30 -05:00
Theodore Ts'o
eaeef86718 ext4: clean up ext4_xattr_list()'s error code checking and return strategy
Any time you see code that tries to add error codes together, you
should want to claw your eyes out...

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10 12:10:07 -05:00