Commit Graph

251 Commits

Author SHA1 Message Date
Stephen Hemminger
b4d7f0a46b bluetooth: driver API update
Convert to net_device_ops and use internal net_device_stats in bnep
device. 

Note: no need for bnep_net_ioctl since if ioctl is not set, then
dev_ifsioc handles it by returning -EOPNOTSUPP

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-07 17:23:17 -08:00
David S. Miller
6332178d91 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/ppp_generic.c
2008-12-23 17:56:23 -08:00
Wei Yongjun
1b08534e56 net: Fix module refcount leak in kernel_accept()
The kernel_accept() does not hold the module refcount of newsock->ops->owner,
so we need __module_get(newsock->ops->owner) code after call kernel_accept()
by hand.
In sunrpc, the module refcount is missing to hold. So this cause kernel panic.

Used following script to reproduct:

while [ 1 ];
do
    mount -t nfs4 192.168.0.19:/ /mnt
    touch /mnt/file
    umount /mnt
    lsmod | grep ipv6
done

This patch fixed the problem by add __module_get(newsock->ops->owner) to
kernel_accept(). So we do not need to used __module_get(newsock->ops->owner)
in every place when used kernel_accept().

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-18 19:35:10 -08:00
Ilpo Järvinen
037322abe6 bt/rfcomm/tty: join error paths
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-14 23:18:00 -08:00
David S. Miller
e19caae717 bluetooth: Fix unused var warning properly in rfcomm_sock_ioctl().
As Stephen Rothwell points out, we don't want 'sock' here but
rather we really do want 'sk'.

This local var is protected by all sorts of bluetooth debugging
kconfig vars, but BT_DBG() is just a straight pr_debug() call
which is unconditional.

pr_debug() evaluates it's args only if either DEBUG or
CONFIG_DYNAMIC_PRINTK_DEBUG is defined.

Solving this inside of the BT_DBG() macro is non-trivial since
it's varargs.  And these ifdefs are ugly.

So, just mark this 'sk' thing __maybe_unused and kill the ifdefs.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09 01:04:27 -08:00
David S. Miller
6cf1a0f856 bluetooth: Fix rfcomm_sock_ioctl() build failure with debugging enabled.
It's 'sock' not 'sk'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09 00:01:53 -08:00
Marcel Holtmann
9a5df92374 Bluetooth: Fix RFCOMM release oops when device is still in use
It turns out that the following sequence of actions will reproduce the
oops:

  1. Create a new RFCOMM device (using RFCOMMCREATEDEV ioctl)
  2. (Try to) open the device
  3. Release the RFCOMM device (using RFCOMMRELEASEDEV ioctl)

At this point, the "/dev/rfcomm*" device is still in use, but it is gone
from the internal list, so the device id can be reused.

  4. Create a new RFCOMM device with the same device id as before

And now kobject will complain that the TTY already exists.

(See http://lkml.org/lkml/2008/7/13/89 for a reproducible test-case.)

This patch attempts to correct this by only removing the device from the
internal list of devices at the final unregister stage, so that the id
won't get reused until the device has been completely destructed.

This should be safe as the RFCOMM_TTY_RELEASED bit will be set for the
device and prevent the device from being reopened after it has been
released.

Based on a report from Vegard Nossum <vegard.nossum@gmail.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:29 +01:00
Marcel Holtmann
2e792995e4 Bluetooth: Fix format arguments warning
Newer GCC versions are a little bit picky about how to deal with format
arguments:

net/bluetooth/hci_sysfs.c: In function ‘hci_register_sysfs’:
net/bluetooth/hci_sysfs.c:418: warning: format not a string literal and no format arguments

It is simple enough to fix and makes the compiler happy.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:29 +01:00
Marcel Holtmann
a418b893a6 Bluetooth: Enable per-module dynamic debug messages
With the introduction of CONFIG_DYNAMIC_PRINTK_DEBUG it is possible to
allow debugging without having to recompile the kernel. This patch turns
all BT_DBG() calls into pr_debug() to support dynamic debug messages.

As a side effect all CONFIG_BT_*_DEBUG statements are now removed and
some broken debug entries have been fixed.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:28 +01:00
Marcel Holtmann
7a9d402053 Bluetooth: Send HCI Reset command by default on device initialization
The Bluetooth subsystem was not using the HCI Reset command when doing
device initialization. The Bluetooth 1.0b specification was ambiguous
on how the device firmware was suppose to handle it. Almost every device
was triggering a transport reset at the same time. In case of USB this
ended up in disconnects from the bus.

All modern Bluetooth dongles handle this perfectly fine and a lot of
them actually require that HCI Reset is sent. If not then they are
either stuck in their HID Proxy mode or their internal structures for
inquiry and paging are not correctly setup.

To handle old and new devices smoothly the Bluetooth subsystem contains
a quirk to force the HCI Reset on initialization. However maintaining
such a quirk becomes more and more complicated. This patch turns the
logic around and lets the old devices disable the HCI Reset command.

The only device where the HCI_QUIRK_NO_RESET is still needed are the
original Digianswer devices and dongles with an early CSR firmware.

CSR reported that they fixed this for version 12 firmware. The last
official release of version 11 firmware is build ID 115. The first
version 12 candidate was build ID 117.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:26 +01:00
Marcel Holtmann
db7aa1c203 Bluetooth: Fix warnings for bt_key_strings and bt_slock_key_strings
After adding proper lockdep annotations for Bluetooth protocols the case
when lockdep is disabled produced two compiler warnings:

net/bluetooth/af_bluetooth.c:60: warning: ‘bt_key_strings’ defined but not used
net/bluetooth/af_bluetooth.c:71: warning: ‘bt_slock_key_strings’ defined but not used

Fix both of them by adding a CONFIG_DEBUG_LOCK_ALLOC conditional around
them and re-arranging the code a little bit.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:19 +01:00
Vegard Nossum
c6bf514c6e Bluetooth: Fix leak of uninitialized data to userspace
struct hci_dev_list_req {
            __u16  dev_num;
            struct hci_dev_req dev_req[0];  /* hci_dev_req structures */
    };

sizeof(struct hci_dev_list_req) == 4, so the two bytes immediately
following "dev_num" will never be initialized. When this structure
is copied to userspace, these uninitialized bytes are leaked.

Fix by using kzalloc() instead of kmalloc(). Found using kmemcheck.

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:19 +01:00
Ingo Molnar
45555c0ed4 bluetooth: fix warning in net/bluetooth/rfcomm/sock.c
fix this warning:

  net/bluetooth/rfcomm/sock.c: In function ‘rfcomm_sock_ioctl’:
  net/bluetooth/rfcomm/sock.c:795: warning: unused variable ‘sk’

perhaps BT_DEBUG() should be improved to do printf format checking
instead of the #ifdef, but that looks quite intrusive: each bluetooth
.c file undefines the macro.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 16:59:21 -08:00
Wang Chen
524ad0a791 netdevice: safe convert to netdev_priv() #part-4
We have some reasons to kill netdev->priv:
1. netdev->priv is equal to netdev_priv().
2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously
   netdev_priv() is more flexible than netdev->priv.
But we cann't kill netdev->priv, because so many drivers reference to it
directly.

This patch is a safe convert for netdev->priv to netdev_priv(netdev).
Since all of the netdev->priv is only for read.
But it is too big to be sent in one mail.
I split it to 4 parts and make every part smaller than 100,000 bytes,
which is max size allowed by vger.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 23:39:10 -08:00
Kay Sievers
fb28ad3590 net: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-10 13:55:14 -08:00
David S. Miller
d2ad3ca88d net/: Kill now superfluous ->last_rx stores.
The generic packet receive code takes care of setting
netdev->last_rx when necessary, for the sake of the
bonding ARP monitor.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03 22:01:07 -08:00
Linus Torvalds
b225ee5bed Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely)
  ipv4: Add a missing rcu_assign_pointer() in routing cache.
  [netdrvr] ibmtr: PCMCIA IBMTR is ok on 64bit
  xen-netfront: Avoid unaligned accesses to IP header
  lmc: copy_*_user under spinlock
  [netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA
2008-10-17 08:58:52 -07:00
Johannes Berg
95a5afca4a net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely)
Some code here depends on CONFIG_KMOD to not try to load
protocol modules or similar, replace by CONFIG_MODULES
where more than just request_module depends on CONFIG_KMOD
and and also use try_then_request_module in ebtables.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-16 15:24:51 -07:00
Jiri Slaby
93c10132a7 HID: move connect quirks
Move connecting from usbhid to the hid layer and fix also hidp in
that manner.
This removes all the ignore/force hidinput/hiddev connecting quirks.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:56 +02:00
Jiri Slaby
8c19a51591 HID: move apple quirks
Move them from the core code to a separate driver.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:49 +02:00
Jiri Slaby
d458a9dfc4 HID: move ignore quirks
Move ignore quirks from usbhid-quirks into hid-core code. Also don't output
warning when ENODEV is error code in usbhid and try ordinal input in hidp
when that error is returned.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:49 +02:00
Jiri Slaby
c500c97140 HID: hid, make parsing event driven
Next step for complete hid bus, this patch includes:
- call parser either from probe or from hid-core if there is no probe.
- add ll_driver structure and centralize some stuff there (open, close...)
- split and merge usb_hid_configure and hid_probe into several functions
  to allow hooks/fixes between them

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:48 +02:00
Jiri Slaby
85cdaf524b HID: make a bus from hid code
Make a bus from hid core. This is the first step for converting all the
quirks and separate almost-drivers into real drivers attached to this bus.

It's implemented to change behaviour in very tiny manner, so that no driver
needs to be changed this time.

Also add generic drivers for both usb and bt into usbhid or hidp
respectively which will bind all non-blacklisted device. Those blacklisted
will be either grabbed by special drivers or by nobody if they are broken at
the very rude base.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:48 +02:00
Marcel Holtmann
7c6a329e44 [Bluetooth] Fix regression from using default link policy
To speed up the Simple Pairing connection setup, the support for the
default link policy has been enabled. This is in contrast to settings
the link policy on every connection setup. Using the default link policy
is the preferred way since there is no need to dynamically change it for
every connection.

For backward compatibility reason and to support old userspace the
HCISETLINKPOL ioctl has been switched over to using hci_request() to
issue the HCI command for setting the default link policy instead of
just storing it in the HCI device structure.

However the hci_request() can only be issued when the device is
brought up. If used on a device that is registered, but still down
it will timeout and fail. This is problematic since the command is
put on the TX queue and the Bluetooth core tries to submit it to
hardware that is not ready yet. The timeout for these requests is
10 seconds and this causes a significant regression when setting up
a new device.

The userspace can perfectly handle a failure of the HCISETLINKPOL
ioctl and will re-submit it later, but the 10 seconds delay causes
a problem. So in case hci_request() is called on a device that is
still down, just fail it with ENETDOWN to indicate what happens.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-12 03:11:54 +02:00
Marcel Holtmann
e7c29cb16c [Bluetooth] Reject L2CAP connections on an insecure ACL link
The Security Mode 4 of the Bluetooth 2.1 specification has strict
authentication and encryption requirements. It is the initiators job
to create a secure ACL link. However in case of malicious devices, the
acceptor has to make sure that the ACL is encrypted before allowing
any kind of L2CAP connection. The only exception here is the PSM 1 for
the service discovery protocol, because that is allowed to run on an
insecure ACL link.

Previously it was enough to reject a L2CAP connection during the
connection setup phase, but with Bluetooth 2.1 it is forbidden to
do any L2CAP protocol exchange on an insecure link (except SDP).

The new hci_conn_check_link_mode() function can be used to check the
integrity of an ACL link. This functions also takes care of the cases
where Security Mode 4 is disabled or one of the devices is based on
an older specification.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-09 07:19:20 +02:00
Marcel Holtmann
09ab6f4c23 [Bluetooth] Enforce correct authentication requirements
With the introduction of Security Mode 4 and Simple Pairing from the
Bluetooth 2.1 specification it became mandatory that the initiator
requires authentication and encryption before any L2CAP channel can
be established. The only exception here is PSM 1 for the service
discovery protocol (SDP). It is meant to be used without any encryption
since it contains only public information. This is how Bluetooth 2.0
and before handle connections on PSM 1.

For Bluetooth 2.1 devices the pairing procedure differentiates between
no bonding, general bonding and dedicated bonding. The L2CAP layer
wrongly uses always general bonding when creating new connections, but it
should not do this for SDP connections. In this case the authentication
requirement should be no bonding and the just-works model should be used,
but in case of non-SDP connection it is required to use general bonding.

If the new connection requires man-in-the-middle (MITM) protection, it
also first wrongly creates an unauthenticated link key and then later on
requests an upgrade to an authenticated link key to provide full MITM
protection. With Simple Pairing the link key generation is an expensive
operation (compared to Bluetooth 2.0 and before) and doing this twice
during a connection setup causes a noticeable delay when establishing
a new connection. This should be avoided to not regress from the expected
Bluetooth 2.0 connection times. The authentication requirements are known
up-front and so enforce them.

To fulfill these requirements the hci_connect() function has been extended
with an authentication requirement parameter that will be stored inside
the connection information and can be retrieved by userspace at any
time. This allows the correct IO capabilities exchange and results in
the expected behavior.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-09 07:19:20 +02:00
Marcel Holtmann
f1c08ca559 [Bluetooth] Fix reference counting during ACL config stage
The ACL config stage keeps holding a reference count on incoming
connections when requesting the extended features. This results in
keeping an ACL link up without any users. The problem here is that
the Bluetooth specification doesn't define an ownership of the ACL
link and thus it can happen that the implementation on the initiator
side doesn't care about disconnecting unused links. In this case the
acceptor needs to take care of this.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-09 07:19:19 +02:00
Marcel Holtmann
63fbd24e51 [Bluetooth] Consolidate maintainers information
The Bluetooth entries for the MAINTAINERS file are a little bit too
much. Consolidate them into two entries. One for Bluetooth drivers and
another one for the Bluetooth subsystem.

Also the MODULE_AUTHOR should indicate the current maintainer of the
module and actually not the original author. Fix all Bluetooth modules
to provide current maintainer information.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-08-18 13:23:53 +02:00
Marcel Holtmann
90855d7b72 [Bluetooth] Fix userspace breakage due missing class links
The Bluetooth adapters and connections are best presented via a class
in sysfs. The removal of the links inside the Bluetooth class broke
assumptions by userspace programs on how to find attached adapters.

This patch creates adapters and connections as part of the Bluetooth
class, but it uses different device types to distinguish them. The
userspace programs can now easily navigate in the sysfs device tree.

The unused platform device and bus have been removed to keep the
code simple and clean.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-08-18 13:23:53 +02:00
Marcel Holtmann
28111eb2f5 [Bluetooth] Add parameters to control BNEP header compression
The Bluetooth qualification for PAN demands testing with BNEP header
compression disabled. This is actually pretty stupid and the Linux
implementation outsmarts the test system since it compresses whenever
possible. So to pass qualification two need parameters have been added
to control the compression of source and destination headers.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-08-07 22:26:54 +02:00
Greg Kroah-Hartman
16be63fd16 bluetooth: remove improper bluetooth class symlinks.
Don't create symlinks in a class to a device that is not owned by the
class.  If the bluetooth subsystem really wants to point to all of the
devices it controls, it needs to create real devices, not fake symlinks.

Cc: Maxim Krasnyansky <maxk@qualcomm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:51 -07:00
Linus Torvalds
db6d8c7a40 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (1232 commits)
  iucv: Fix bad merging.
  net_sched: Add size table for qdiscs
  net_sched: Add accessor function for packet length for qdiscs
  net_sched: Add qdisc_enqueue wrapper
  highmem: Export totalhigh_pages.
  ipv6 mcast: Omit redundant address family checks in ip6_mc_source().
  net: Use standard structures for generic socket address structures.
  ipv6 netns: Make several "global" sysctl variables namespace aware.
  netns: Use net_eq() to compare net-namespaces for optimization.
  ipv6: remove unused macros from net/ipv6.h
  ipv6: remove unused parameter from ip6_ra_control
  tcp: fix kernel panic with listening_get_next
  tcp: Remove redundant checks when setting eff_sacks
  tcp: options clean up
  tcp: Fix MD5 signatures for non-linear skbs
  sctp: Update sctp global memory limit allocations.
  sctp: remove unnecessary byteshifting, calculate directly in big-endian
  sctp: Allow only 1 listening socket with SO_REUSEADDR
  sctp: Do not leak memory on multiple listen() calls
  sctp: Support ipv6only AF_INET6 sockets.
  ...
2008-07-20 17:43:29 -07:00
Alan Cox
a352def21a tty: Ldisc revamp
Move the line disciplines towards a conventional ->ops arrangement.  For
the moment the actual 'tty_ldisc' struct in the tty is kept as part of
the tty struct but this can then be changed if it turns out that when it
all settles down we want to refcount ldiscs separately to the tty.

Pull the ldisc code out of /proc and put it with our ldisc code.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20 17:12:34 -07:00
David S. Miller
407d819cf0 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6 2008-07-19 00:30:39 -07:00
Marcel Holtmann
b1235d7961 [Bluetooth] Allow security for outgoing L2CAP connections
When requested the L2CAP layer will now enforce authentication and
encryption on outgoing connections. The usefulness of this feature
is kinda limited since it will not allow proper connection ownership
tracking until the authentication procedure has been finished. This
is a limitation of Bluetooth 2.0 and before and can only be fixed by
using Simple Pairing.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:54 +02:00
Marcel Holtmann
7cb127d5b0 [Bluetooth] Add option to disable eSCO connection creation
It has been reported that some eSCO capable headsets are not able to
connect properly. The real reason for this is unclear at the moment. So
for easier testing add a module parameter to disable eSCO connection
creation.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:53 +02:00
Marcel Holtmann
ec8dab36e0 [Bluetooth] Signal user-space for HIDP and BNEP socket errors
When using the HIDP or BNEP kernel support, the user-space needs to
know if the connection has been terminated for some reasons. Wake up
the application if that happens. Otherwise kernel and user-space are
no longer on the same page and weird behaviors can happen.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:53 +02:00
Marcel Holtmann
a0c22f2265 [Bluetooth] Move pending packets from RFCOMM socket to TTY
When an incoming RFCOMM socket connection gets converted into a TTY,
it can happen that packets are lost. This mainly happens with the
Handsfree profile where the remote side starts sending data right
away. The problem is that these packets are in the socket receive
queue. So when creating the TTY make sure to copy all pending packets
from the socket receive queue to a private queue inside the TTY.

To make this actually work, the flow control on the newly created TTY
will be disabled and only enabled again when the TTY is opened by an
application. And right before that, the pending packets will be put
into the TTY flip buffer.

Signed-off-by: Denis Kenzior <denis.kenzior@trolltech.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:52 +02:00
Marcel Holtmann
8b6b3da765 [Bluetooth] Store remote modem status for RFCOMM TTY
When switching a RFCOMM socket to a TTY, the remote modem status might
be needed later. Currently it is lost since the original configuration
is done via the socket interface. So store the modem status and reply
it when the socket has been converted to a TTY.

Signed-off-by: Denis Kenzior <denis.kenzior@trolltech.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:52 +02:00
Marcel Holtmann
ca37bdd53b [Bluetooth] Use non-canonical TTY by default for RFCOMM
While the RFCOMM TTY emulation can act like a real serial port, in
reality it is not used like this. So to not mess up stupid applications,
use the non-canonical mode by default.

Signed-off-by: Denis Kenzior <denis.kenzior@trolltech.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:52 +02:00
Marcel Holtmann
78c6a1744f [Bluetooth] Update Bluetooth core version number
With all the Bluetooth 2.1 changes and the support for Simple Pairing,
it is important to update the Bluetooth core version number.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:51 +02:00
Marcel Holtmann
7d0db0a373 [Bluetooth] Use a more unique bus name for connections
When attaching Bluetooth low-level connections to the bus, the bus name
is constructed from the remote address since at that time the connection
handle is not assigned yet. This has worked so far, but also caused a
lot of troubles. It is better to postpone the creation of the sysfs
entry to the time when the connection actually has been established
and then use its connection handle as unique identifier.

This also fixes the case where two different adapters try to connect
to the same remote device.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:51 +02:00
Marcel Holtmann
43cbeee9f9 [Bluetooth] Add support for TIOCOUTQ and TIOCINQ ioctls
Almost every protocol family supports the TIOCOUTQ and TIOCINQ ioctls
and even Bluetooth could make use of them. When implementing audio
streaming and integration with GStreamer or PulseAudio they will allow
a better timing and synchronization.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:51 +02:00
Marcel Holtmann
3241ad820d [Bluetooth] Add timestamp support to L2CAP, RFCOMM and SCO
Enable the common timestamp functionality that the network subsystem
provides for L2CAP, RFCOMM and SCO sockets. It is possible to either
use SO_TIMESTAMP or the IOCTLs to retrieve the timestamp of the
current packet.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:50 +02:00
Marcel Holtmann
40be492fe4 [Bluetooth] Export details about authentication requirements
With the Simple Pairing support, the authentication requirements are
an explicit setting during the bonding process. Track and enforce the
requirements and allow higher layers like L2CAP and RFCOMM to increase
them if needed.

This patch introduces a new IOCTL that allows to query the current
authentication requirements. It is also possible to detect Simple
Pairing support in the kernel this way.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:50 +02:00
Marcel Holtmann
f8558555f3 [Bluetooth] Initiate authentication during connection establishment
With Bluetooth 2.1 and Simple Pairing the requirement is that any new
connection needs to be authenticated and that encryption has been
switched on before allowing L2CAP to use it. So make sure that all
the requirements are fulfilled and otherwise drop the connection with
a minimal disconnect timeout of 10 milliseconds.

This change only affects Bluetooth 2.1 devices and Simple Pairing
needs to be enabled locally and in the remote host stack. The previous
changes made sure that these information are discovered before any
kind of authentication and encryption is triggered.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:49 +02:00
Marcel Holtmann
769be974d0 [Bluetooth] Use ACL config stage to retrieve remote features
The Bluetooth technology introduces new features on a regular basis
and for some of them it is important that the hardware on both sides
support them. For features like Simple Pairing it is important that
the host stacks on both sides have switched this feature on. To make
valid decisions, a config stage during ACL link establishment has been
introduced that retrieves remote features and if needed also the remote
extended features (known as remote host features) before signalling
this link as connected.

This change introduces full reference counting of incoming and outgoing
ACL links and the Bluetooth core will disconnect both if no owner of it
is present. To better handle interoperability during the pairing phase
the disconnect timeout for incoming connections has been increased to
10 seconds. This is five times more than for outgoing connections.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:49 +02:00
Marcel Holtmann
a8bd28baf2 [Bluetooth] Export remote Simple Pairing mode via sysfs
Since the remote Simple Pairing mode is stored together with the
inquiry cache, it makes sense to show it together with the other
information.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:49 +02:00
Marcel Holtmann
41a96212b3 [Bluetooth] Track status of remote Simple Pairing mode
The Simple Pairing process can only be used if both sides have the
support enabled in the host stack. The current Bluetooth specification
has three ways to detect this support.

If an Extended Inquiry Result has been sent during inquiry then it
is safe to assume that Simple Pairing is enabled. It is not allowed
to enable Extended Inquiry without Simple Pairing. During the remote
name request phase a notification with the remote host supported
features will be sent to indicate Simple Pairing support. Also the
second page of the remote extended features can indicate support for
Simple Pairing.

For all three cases the value of remote Simple Pairing mode is stored
in the inquiry cache for later use.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:48 +02:00
Marcel Holtmann
333140b57f [Bluetooth] Track status of Simple Pairing mode
The Simple Pairing feature is optional and needs to be enabled by the
host stack first. The Linux kernel relies on the Bluetooth daemon to
either enable or disable it, but at any time it needs to know the
current state of the Simple Pairing mode. So track any changes made
by external entities and store the current mode in the HCI device
structure.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:48 +02:00