-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmWWu9EACgkQu+CwddJF
iJpXvQf/aGL7uEY57VpTm0t4gPwoZ9r2P89HxI/nQs9XgVzDcBmVp/cC0LDvSdcm
t91kJO538KeGjMgvlhLMTEuoShH5FlPs6cOwrGAYUoAGa4NwiOpGvliGky+nNHqY
w887ZgSzVLq0UOuSvn86N6enumMvewt4V+872+OWo6O1HWOJhC0SgHTIa8QPQtwb
yZ9BghO5IqMRXiZEsSIwyO+tQHcaU6l2G5huFXzgMFUhkQqAB9KTFc3h6rYI+i80
L4ppNXo2KNPGTDRb9dA8LNMWgvmfjhCb7chs8o1zSY2PwZlkzOix7EUBLCAIbc/2
EIaFC8AsZjfT47D1t72r8QpHB+C14Q==
=J+E7
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLUB: delayed freezing of CPU partial slabs (Chengming Zhou)
Freezing is an operation involving double_cmpxchg() that makes a slab
exclusive for a particular CPU. Chengming noticed that we use it also
in situations where we are not yet installing the slab as the CPU
slab, because freezing also indicates that the slab is not on the
shared list. This results in redundant freeze/unfreeze operation and
can be avoided by marking separately the shared list presence by
reusing the PG_workingset flag.
This approach neatly avoids the issues described in 9b1ea29bc0
("Revert "mm, slub: consider rest of partial list if acquire_slab()
fails"") as we can now grab a slab from the shared list in a quick
and guaranteed way without the cmpxchg_double() operation that
amplifies the lock contention and can fail.
As a result, lkp has reported 34.2% improvement of
stress-ng.rawudp.ops_per_sec
- SLAB removal and SLUB cleanups (Vlastimil Babka)
The SLAB allocator has been deprecated since 6.5 and nobody has
objected so far. We agreed at LSF/MM to wait until the next LTS,
which is 6.6, so we should be good to go now.
This doesn't yet erase all traces of SLAB outside of mm/ so some dead
code, comments or documentation remain, and will be cleaned up
gradually (some series are already in the works).
Removing the choice of allocators has already allowed to simplify and
optimize the code wiring up the kmalloc APIs to the SLUB
implementation.
* tag 'slab-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (34 commits)
mm/slub: free KFENCE objects in slab_free_hook()
mm/slub: handle bulk and single object freeing separately
mm/slub: introduce __kmem_cache_free_bulk() without free hooks
mm/slub: fix bulk alloc and free stats
mm/slub: optimize free fast path code layout
mm/slub: optimize alloc fastpath code layout
mm/slub: remove slab_alloc() and __kmem_cache_alloc_lru() wrappers
mm/slab: move kmalloc() functions from slab_common.c to slub.c
mm/slab: move kmalloc_slab() to mm/slab.h
mm/slab: move kfree() from slab_common.c to slub.c
mm/slab: move struct kmem_cache_node from slab.h to slub.c
mm/slab: move memcg related functions from slab.h to slub.c
mm/slab: move pre/post-alloc hooks from slab.h to slub.c
mm/slab: consolidate includes in the internal mm/slab.h
mm/slab: move the rest of slub_def.h to mm/slab.h
mm/slab: move struct kmem_cache_cpu declaration to slub.c
mm/slab: remove mm/slab.c and slab_def.h
mm/mempool/dmapool: remove CONFIG_DEBUG_SLAB ifdefs
mm/slab: remove CONFIG_SLAB code from slab common code
cpu/hotplug: remove CPUHP_SLAB_PREPARE hooks
...
The allocation request for swiotlb contiguous memory greater than
128*2KB cannot be fulfilled because it exceeds the maximum contiguous
memory limit. If the swiotlb memory we allocate is larger than 128*2KB,
swiotlb_find_slots() will still schedule the allocation of a new memory
pool, which will increase memory overhead.
Fix it by adding a check with alloc_size no more than 128*2KB before
scheduling the allocation of a new memory pool in swiotlb_find_slots().
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
- Yafang Shao added task_get_cgroup1() helper to enable a similar BPF helper
so that BPF progs can be more useful on cgroup1 hierarchies. While cgroup1
is mostly in maintenance mode, this addition is very small while having an
outsized usefulness for users who are still on cgroup1. Yafang also
optimized root cgroup list access by making it RCU protected in the
process.
- Waiman Long optimized rstat operation leading to substantially lower and
more consistent lock hold time while flushing the hierarchical statistics.
As the lock can be acquired briefly in various hot paths, this reduction
has cascading benefits.
- Waiman also improved the quality of isolation for cpuset's isolated
partitions. CPUs which are allocated to isolated partitions are now
excluded from running unbound work items and cpu_is_isolated() test which
is used by vmstat and memcg to reduce interference now includes cpuset
isolated CPUs. While it isn't there yet, the hope is eventually reaching
parity with the isolation level provided by the `isolcpus` boot param but
in a dynamic manner.
This involved a couple workqueue patches which were applied directly to
cgroup/for-6.8 rather than ping-ponged through the wq tree. This was
because the wq code change was small and the area is usually very static
and unlikely to cause conflicts. However, luck had it that there was a wq
bug fix in the area during the 6.7 cycle which caused a conflict. The
conflict is contextual but can be a bit confusing to resolve, so there is
one merge from wq/for-6.7-fixes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZYnuJg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGQ5kAP9nMMWqi+R1HeG7+hWROTVjQZ0OM9KRcpZ1TmjF
FNbkJgEAzt+sPnoWwYDTSI7pkNeZ/IM7x1qkkKGvENNtUXrz0Ac=
=PyYN
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Yafang Shao added task_get_cgroup1() helper to enable a similar BPF
helper so that BPF progs can be more useful on cgroup1 hierarchies.
While cgroup1 is mostly in maintenance mode, this addition is very
small while having an outsized usefulness for users who are still on
cgroup1. Yafang also optimized root cgroup list access by making it
RCU protected in the process.
- Waiman Long optimized rstat operation leading to substantially lower
and more consistent lock hold time while flushing the hierarchical
statistics. As the lock can be acquired briefly in various hot paths,
this reduction has cascading benefits.
- Waiman also improved the quality of isolation for cpuset's isolated
partitions. CPUs which are allocated to isolated partitions are now
excluded from running unbound work items and cpu_is_isolated() test
which is used by vmstat and memcg to reduce interference now includes
cpuset isolated CPUs. While it isn't there yet, the hope is
eventually reaching parity with the isolation level provided by the
`isolcpus` boot param but in a dynamic manner.
* tag 'cgroup-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Move rcu_head up near the top of cgroup_root
cgroup/cpuset: Include isolated cpuset CPUs in cpu_is_isolated() check
cgroup: Avoid false cacheline sharing of read mostly rstat_cpu
cgroup/rstat: Optimize cgroup_rstat_updated_list()
cgroup: Fix documentation for cpu.idle
cgroup/cpuset: Expose cpuset.cpus.isolated
workqueue: Move workqueue_set_unbound_cpumask() and its helpers inside CONFIG_SYSFS
cgroup/rstat: Reduce cpu_lock hold time in cgroup_rstat_flush_locked()
cgroup/cpuset: Take isolated CPUs out of workqueue unbound cpumask
cgroup/cpuset: Keep track of CPUs in isolated partitions
selftests/cgroup: Minor code cleanup and reorganization of test_cpuset_prs.sh
workqueue: Add workqueue_unbound_exclude_cpumask() to exclude CPUs from wq_unbound_cpumask
selftests: cgroup: Fixes a typo in a comment
cgroup: Add a new helper for cgroup1 hierarchy
cgroup: Add annotation for holding namespace_sem in current_cgns_cgroup_from_root()
cgroup: Eliminate the need for cgroup_mutex in proc_cgroup_show()
cgroup: Make operations on the cgroup root_list RCU safe
cgroup: Remove unnecessary list_empty()
- Energy scheduling:
- Consolidate how the max compute capacity is
used in the scheduler and how we calculate
the frequency for a level of utilization.
- Rework interface between the scheduler and
the schedutil governor
- Simplify the util_est logic
- Deadline scheduler:
- Work more towards reducing SCHED_DEADLINE
starvation of low priority tasks (e.g., SCHED_OTHER)
tasks when higher priority tasks monopolize CPU
cycles, via the introduction of 'deadline servers'
(nested/2-level scheduling).
"Fair servers" to make use of this facility are
not introduced yet.
- EEVDF:
- Introduce O(1) fastpath for EEVDF task selection
- NUMA balancing:
- Tune the NUMA-balancing vma scanning logic some more,
to better distribute the probability
of a particular vma getting scanned.
- Plus misc fixes, cleanups and updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=wTVh
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Energy scheduling:
- Consolidate how the max compute capacity is used in the scheduler
and how we calculate the frequency for a level of utilization.
- Rework interface between the scheduler and the schedutil governor
- Simplify the util_est logic
Deadline scheduler:
- Work more towards reducing SCHED_DEADLINE starvation of low
priority tasks (e.g., SCHED_OTHER) tasks when higher priority tasks
monopolize CPU cycles, via the introduction of 'deadline servers'
(nested/2-level scheduling).
"Fair servers" to make use of this facility are not introduced yet.
EEVDF:
- Introduce O(1) fastpath for EEVDF task selection
NUMA balancing:
- Tune the NUMA-balancing vma scanning logic some more, to better
distribute the probability of a particular vma getting scanned.
Plus misc fixes, cleanups and updates"
* tag 'sched-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
sched/fair: Fix tg->load when offlining a CPU
sched/fair: Remove unused 'next_buddy_marked' local variable in check_preempt_wakeup_fair()
sched/fair: Use all little CPUs for CPU-bound workloads
sched/fair: Simplify util_est
sched/fair: Remove SCHED_FEAT(UTIL_EST_FASTUP, true)
arm64/amu: Use capacity_ref_freq() to set AMU ratio
cpufreq/cppc: Set the frequency used for computing the capacity
cpufreq/cppc: Move and rename cppc_cpufreq_{perf_to_khz|khz_to_perf}()
energy_model: Use a fixed reference frequency
cpufreq/schedutil: Use a fixed reference frequency
cpufreq: Use the fixed and coherent frequency for scaling capacity
sched/topology: Add a new arch_scale_freq_ref() method
freezer,sched: Clean saved_state when restoring it during thaw
sched/fair: Update min_vruntime for reweight_entity() correctly
sched/doc: Update documentation after renames and synchronize Chinese version
sched/cpufreq: Rework iowait boost
sched/cpufreq: Rework schedutil governor performance estimation
sched/pelt: Avoid underestimation of task utilization
sched/timers: Explain why idle task schedules out on remote timer enqueue
sched/cpuidle: Comment about timers requirements VS idle handler
...
- Add branch stack counters ABI extension to better capture
the growing amount of information the PMU exposes via
branch stack sampling. There's matching tooling support.
- Fix race when creating the nr_addr_filters sysfs file
- Add Intel Sierra Forest and Grand Ridge intel/cstate
PMU support.
- Add Intel Granite Rapids, Sierra Forest and Grand Ridge
uncore PMU support.
- Misc cleanups & fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2O/5
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
- Add branch stack counters ABI extension to better capture the growing
amount of information the PMU exposes via branch stack sampling.
There's matching tooling support.
- Fix race when creating the nr_addr_filters sysfs file
- Add Intel Sierra Forest and Grand Ridge intel/cstate PMU support
- Add Intel Granite Rapids, Sierra Forest and Grand Ridge uncore PMU
support
- Misc cleanups & fixes
* tag 'perf-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Factor out topology_gidnid_map()
perf/x86/intel/uncore: Fix NULL pointer dereference issue in upi_fill_topology()
perf/x86/amd: Reject branch stack for IBS events
perf/x86/intel/uncore: Support Sierra Forest and Grand Ridge
perf/x86/intel/uncore: Support IIO free-running counters on GNR
perf/x86/intel/uncore: Support Granite Rapids
perf/x86/uncore: Use u64 to replace unsigned for the uncore offsets array
perf/x86/intel/uncore: Generic uncore_get_uncores and MMIO format of SPR
perf: Fix the nr_addr_filters fix
perf/x86/intel/cstate: Add Grand Ridge support
perf/x86/intel/cstate: Add Sierra Forest support
x86/smp: Export symbol cpu_clustergroup_mask()
perf/x86/intel/cstate: Cleanup duplicate attr_groups
perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file
perf/x86/intel: Support branch counters logging
perf/x86/intel: Reorganize attrs and is_visible
perf: Add branch_sample_call_stack
perf/x86: Add PERF_X86_EVENT_NEEDS_BRANCH_STACK flag
perf: Add branch stack counters
- Various preparatory cleanups & enhancements of the timer-wheel code,
in preparation for the WIP 'pull timers at expiry' timer migration model
series (which will replace the current 'push timers at enqueue' migration
model), by Anna-Maria Behnsen:
- Update comments and clean up confusing variable names
- Add debug check to warn about time travel
- Improve/expand timer-wheel tracepoints
- Optimize away unnecessary IPIs for deferrable timers
- Restructure & clean up next_expiry_recalc()
- Clean up forward_timer_base()
- Introduce __forward_timer_base() and use it to simplify
and micro-optimize get_next_timer_interrupt()
- Restructure the get_next_timer_interrupt()'s idle logic
for better readability and to enable a minor optimization.
- Fix the nextevt calculation when no timers are pending
- Fix the sysfs_get_uname() prototype declaration
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=n40J
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer subsystem updates from Ingo Molnar:
- Various preparatory cleanups & enhancements of the timer-wheel code,
in preparation for the WIP 'pull timers at expiry' timer migration
model series (which will replace the current 'push timers at enqueue'
migration model), by Anna-Maria Behnsen:
- Update comments and clean up confusing variable names
- Add debug check to warn about time travel
- Improve/expand timer-wheel tracepoints
- Optimize away unnecessary IPIs for deferrable timers
- Restructure & clean up next_expiry_recalc()
- Clean up forward_timer_base()
- Introduce __forward_timer_base() and use it to simplify and
micro-optimize get_next_timer_interrupt()
- Restructure the get_next_timer_interrupt()'s idle logic for better
readability and to enable a minor optimization.
- Fix the nextevt calculation when no timers are pending
- Fix the sysfs_get_uname() prototype declaration
* tag 'timers-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix nextevt calculation when no timers are pending
timers: Rework idle logic
timers: Use already existing function for forwarding timer base
timers: Split out forward timer base functionality
timers: Clarify check in forward_timer_base()
timers: Move store of next event into __next_timer_interrupt()
timers: Do not IPI for deferrable timers
tracing/timers: Add tracepoint for tracking timer base is_idle flag
tracing/timers: Enhance timer_start tracepoint
tick-sched: Warn when next tick seems to be in the past
tick/sched: Cleanup confusing variables
tick-sched: Fix function names in comments
time: Make sysfs_get_uname() function visible in header
and always-inline them, to improve syscall entry performance on s390 by ~11%.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmWbxQ4RHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1h5Cw//TEIlWPCLpIeiDsOCKb5g2e4U+AatNIGt
ysmCvTWsKOiBEItDbZpwdpcdv/Ed41UXkS7Zmwetw81P50rz/i+kIJZW4gdl9GiV
qhjj0gbhGQ43myQkGdYIcmdVaHl9fuyDGZSai6c17zgdOoL5CvCGGiL5Dn4Cn36x
skm8P66r9DuM9cLTnhqQHMKp7cf4HQAX+awhFeppCquhzh3M2I8GsUVrT7tZV+Jw
zOMLVjsI8Va4JyGsl07DoqWlyFWcoYvJ5ayzvDCaBxgeFIK9uZgwkKV0HT9q5tvg
RhsHQK4zbxgkaMMCgEt/WdT14YesO2+5+ml91Zkjp2NMud0O0gmd2YXZju1aOQQw
XCL3pm6DB4oN+IkW9lo6k3rqo9PEip9rt/FAfkNLeb50elHfSZSvE1ZxXSQwx5N4
pHDNMcK6SMsJhEdJInNotViKrpXX0Rjr7x1pY/2DA9bMP/jX/9+J3ODuGCDZrvjp
eq4JM15VSq6tVmg+LMcszThWz+9gIaLFAqQwFt3G082ANDkOvg0mK7T65gccDuyA
Gl6f/p3tAYHYxOI9KOBN6Daq3QAqlMT+M4YgNbbv8fanWYIzRd3U/Y+YrUCnryu8
Db+8FHlUkbJb/clUofJ5nj0Ene7xReJX/8m8XxA95Cc/UGYU8w0cachXDoPyKZUP
xtFW3xn8K4M=
=VHW9
-----END PGP SIGNATURE-----
Merge tag 'core-entry-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic syscall updates from Ingo Molnar:
"Move various entry functions from kernel/entry/common.c to a header
file, and always-inline them, to improve syscall entry performance
on s390 by ~11%"
* tag 'core-entry-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Move syscall_enter_from_user_mode() to header file
entry: Move enter_from_user_mode() to header file
entry: Move exit to usermode functions to header file
- lock guards:
- Use lock guards in the ptrace code
- Introduce conditional guards to extend to conditional lock
primitives like mutex_trylock()/mutex_lock_interruptible()/etc.
- lockdep:
- Optimize 'struct lock_class' to be smaller
- Update file patterns in MAINTAINERS
- mutexes: Document mutex lifetime rules a bit more
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fOTd
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molar:
"Lock guards:
- Use lock guards in the ptrace code
- Introduce conditional guards to extend to conditional lock
primitives like mutex_trylock()/mutex_lock_interruptible()/etc.
lockdep:
- Optimize 'struct lock_class' to be smaller
- Update file patterns in MAINTAINERS
mutexes:
- Document mutex lifetime rules a bit more"
* tag 'locking-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked
locking/mutex: Document that mutex_unlock() is non-atomic
ptrace: Convert ptrace_attach() to use lock guards
locking/lockdep: Slightly reorder 'struct lock_class' to save some memory
MAINTAINERS: Add include/linux/lockdep*.h
cleanup: Add conditional guard support
commit 23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
NR_PAGE_ORDERS defines the number of page orders supported by the page
allocator, ranging from 0 to MAX_ORDER, MAX_ORDER + 1 in total.
NR_PAGE_ORDERS assists in defining arrays of page orders and allows for
more natural iteration over them.
[kirill.shutemov@linux.intel.com: fixup for kerneldoc warning]
Link: https://lkml.kernel.org/r/20240101111512.7empzyifq7kxtzk3@box
Link: https://lkml.kernel.org/r/20231228144704.14033-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUzBQAKCRCRxhvAZXjc
ot+3AQCZw1PBD4azVxFMWH76qwlAGoVIFug4+ogKU/iUa4VLygEA2FJh1vLJw5iI
LpgBEIUTPVkwtzinAW94iJJo1Vr7NAI=
=p6PB
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iov_iter cleanups from Christian Brauner:
"This contains a minor cleanup. The patches drop an unused argument
from import_single_range() allowing to replace import_single_range()
with import_ubuf() and dropping import_single_range() completely"
* tag 'vfs-6.8.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: replace import_single_range() with import_ubuf()
iov_iter: remove unused 'iov' argument from import_single_range()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUxRQAKCRCRxhvAZXjc
ov/QAQDzvge3oQ9MEymmOiyzzcF+HhAXBr+9oEsYJjFc1p0TsgEA61gXjZo7F1jY
KBqd6znOZCR+Waj0kIVJRAo/ISRBqQc=
=0bRl
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Add Jan Kara as VFS reviewer
- Show correct device and inode numbers in proc/<pid>/maps for vma
files on stacked filesystems. This is now easily doable thanks to
the backing file work from the last cycles. This comes with
selftests
Cleanups:
- Remove a redundant might_sleep() from wait_on_inode()
- Initialize pointer with NULL, not 0
- Clarify comment on access_override_creds()
- Rework and simplify eventfd_signal() and eventfd_signal_mask()
helpers
- Process aio completions in batches to avoid needless wakeups
- Completely decouple struct mnt_idmap from namespaces. We now only
keep the actual idmapping around and don't stash references to
namespaces
- Reformat maintainer entries to indicate that a given subsystem
belongs to fs/
- Simplify fput() for files that were never opened
- Get rid of various pointless file helpers
- Rename various file helpers
- Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
last cycle
- Make relatime_need_update() return bool
- Use GFP_KERNEL instead of GFP_USER when allocating superblocks
- Replace deprecated ida_simple_*() calls with their current ida_*()
counterparts
Fixes:
- Fix comments on user namespace id mapping helpers. They aren't
kernel doc comments so they shouldn't be using /**
- s/Retuns/Returns/g in various places
- Add missing parameter documentation on can_move_mount_beneath()
- Rename i_mapping->private_data to i_mapping->i_private_data
- Fix a false-positive lockdep warning in pipe_write() for watch
queues
- Improve __fget_files_rcu() code generation to improve performance
- Only notify writer that pipe resizing has finished after setting
pipe->max_usage otherwise writers are never notified that the pipe
has been resized and hang
- Fix some kernel docs in hfsplus
- s/passs/pass/g in various places
- Fix kernel docs in ntfs
- Fix kcalloc() arguments order reported by gcc 14
- Fix uninitialized value in reiserfs"
* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
reiserfs: fix uninit-value in comp_keys
watch_queue: fix kcalloc() arguments order
ntfs: dir.c: fix kernel-doc function parameter warnings
fs: fix doc comment typo fs tree wide
selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
fs/proc: show correct device and inode numbers in /proc/pid/maps
eventfd: Remove usage of the deprecated ida_simple_xx() API
fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
fs/hfsplus: wrapper.c: fix kernel-doc warnings
fs: add Jan Kara as reviewer
fs/inode: Make relatime_need_update return bool
pipe: wakeup wr_wait after setting max_usage
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
...
The parse_actions() function uses 'len = str_has_prefix()' to test which
action is in the string being parsed. But then it goes and repeats the
logic for each different action. This logic can be simplified and
duplicate code can be removed as 'len' contains the length of the found
prefix which should be used for all actions.
Link: https://lore.kernel.org/all/20240107112044.6702cb66@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240107203258.37e26d2b@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andy Shevchenko <andy@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Merge system-wide power management updates for 6.8-rc1:
- Fix possible deadlocks in the core system-wide PM code that occur if
device-handling functions cannot be executed asynchronously during
resune from system-wide suspend (Rafael J. Wysocki).
- Clean up unnecessary local variable initializations in multiple
places in the hibernation code (Wang chaodong, Li zeming).
- Adjust core hibernation code to avoid missing wakeup events that
occur after saving an image to persistent storage (Chris Feng).
- Update hibernation code to enforce correct ordering during image
compression and decompression (Hongchen Zhang).
- Use kmap_local_page() instead of kmap_atomic() in copy_data_page()
during hibernation and restore (Chen Haonan).
- Adjust documentation and code comments to reflect recent task freezer
changes (Kevin Hao).
- Repair excess function parameter description warning in the
hibernation image-saving code (Randy Dunlap).
* pm-sleep:
PM: sleep: Fix possible deadlocks in core system-wide PM code
async: Introduce async_schedule_dev_nocall()
async: Split async_schedule_node_domain()
PM: hibernate: Repair excess function parameter description warning
PM: sleep: Remove obsolete comment from unlock_system_sleep()
Documentation: PM: Adjust freezing-of-tasks.rst to the freezer changes
PM: hibernate: Use kmap_local_page() in copy_data_page()
PM: hibernate: Enforce ordering during image compression/decompression
PM: hibernate: Avoid missing wakeup events during hibernation
PM: hibernate: Do not initialize error in snapshot_write_next()
PM: hibernate: Do not initialize error in swap_write_page()
PM: hibernate: Drop unnecessary local variable initialization
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZZgrfgAKCRDbK58LschI
g87JAQDu+oUG3aWnRJi+lJTK8vGnKRuBwUxgnI5Ze99N0tuPmAEAz1gpXLYP+fKE
eqRhZGGhujdHC9if3Le+nG6nvf8Gvw0=
=KPkZ
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-01-05
We've added 40 non-merge commits during the last 2 day(s) which contain
a total of 73 files changed, 1526 insertions(+), 951 deletions(-).
The main changes are:
1) Fix a memory leak when streaming AF_UNIX sockets were inserted
into multiple sockmap slots/maps, from John Fastabend.
2) Fix gotol in s390 BPF JIT with large offsets, from Ilya Leoshkevich.
3) Fix reattachment branch in bpf_tracing_prog_attach() and reject
the request if there is no valid attach_btf, from Jiri Olsa.
4) Remove deprecated bpfilter kernel leftovers given the project
is developed in user space (https://github.com/facebook/bpfilter),
from Quentin Deslandes.
5) Relax tracing BPF program recursive attach rules given right now
it is not possible to create tracing program call cycles,
from Dmitrii Dolgov.
6) Fix excessive memory consumption for the bpf_global_percpu_ma
for systems with a large number of CPUs, from Yonghong Song.
7) Small x86 BPF JIT cleanup to reuse emit_nops instead of open-coding
memcpy of x86_nops, from Leon Hwang.
8) Follow-up for libbpf to support __arg_ctx global function argument tag
semantics to complement the merged kernel side, from Andrii Nakryiko.
9) Introduce "volatile compare" macros for BPF selftests in order
to make the latter more robust against compiler optimization,
from Alexei Starovoitov.
10) Small simplification in verifier's size checking of helper accesses
along with additional selftests, from Andrei Matei.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (40 commits)
selftests/bpf: Test re-attachment fix for bpf_tracing_prog_attach
bpf: Fix re-attachment branch in bpf_tracing_prog_attach
selftests/bpf: Add test for recursive attachment of tracing progs
bpf: Relax tracing prog recursive attach rules
bpf, x86: Use emit_nops to replace memcpy x86_nops
selftests/bpf: Test gotol with large offsets
selftests/bpf: Double the size of test_loader log
s390/bpf: Fix gotol with large offsets
bpfilter: remove bpfilter
bpf: Remove unnecessary cpu == 0 check in memalloc
selftests/bpf: add __arg_ctx BTF rewrite test
selftests/bpf: add arg:ctx cases to test_global_funcs tests
libbpf: implement __arg_ctx fallback logic
libbpf: move BTF loading step after relocation step
libbpf: move exception callbacks assignment logic into relocation step
libbpf: use stable map placeholder FDs
libbpf: don't rely on map->fd as an indicator of map being created
libbpf: use explicit map reuse flag to skip map creation steps
libbpf: make uniform use of btf__fd() accessor inside libbpf
selftests/bpf: Add a selftest with > 512-byte percpu allocation size
...
====================
Link: https://lore.kernel.org/r/20240105170105.21070-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The purpose of crash_exclude_mem_range() is to remove all memory ranges
that overlap with [mstart-mend]. However, the current logic only removes
the first overlapping memory range.
Commit a2e9a95d21 ("kexec: Improve & fix crash_exclude_mem_range() to
handle overlapping ranges") attempted to address this issue, but it did
not fix all error cases.
Let's fix and simplify the logic of crash_exclude_mem_range().
Link: https://lkml.kernel.org/r/20240102144905.110047-4-ytcoode@gmail.com
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add CONFIG_LRU_GEN_WALKS_MMU such that if disabled, the code that
walks page tables to promote pages into the youngest generation will
not be built.
Also improves code readability by adding two helper functions
get_mm_state() and get_next_mm().
Link: https://lkml.kernel.org/r/20231227141205.2200125-3-kinseyho@google.com
Signed-off-by: Kinsey Ho <kinseyho@google.com>
Co-developed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Donet Tom <donettom@linux.vnet.ibm.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The following case can cause a crash due to missing attach_btf:
1) load rawtp program
2) load fentry program with rawtp as target_fd
3) create tracing link for fentry program with target_fd = 0
4) repeat 3
In the end we have:
- prog->aux->dst_trampoline == NULL
- tgt_prog == NULL (because we did not provide target_fd to link_create)
- prog->aux->attach_btf == NULL (the program was loaded with attach_prog_fd=X)
- the program was loaded for tgt_prog but we have no way to find out which one
BUG: kernel NULL pointer dereference, address: 0000000000000058
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x15b/0x430
? fixup_exception+0x22/0x330
? exc_page_fault+0x6f/0x170
? asm_exc_page_fault+0x22/0x30
? bpf_tracing_prog_attach+0x279/0x560
? btf_obj_id+0x5/0x10
bpf_tracing_prog_attach+0x439/0x560
__sys_bpf+0x1cf4/0x2de0
__x64_sys_bpf+0x1c/0x30
do_syscall_64+0x41/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Return -EINVAL in this situation.
Fixes: f3a9507554 ("bpf: Allow trampoline re-attach for tracing and lsm programs")
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20240103190559.14750-4-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, it's not allowed to attach an fentry/fexit prog to another
one fentry/fexit. At the same time it's not uncommon to see a tracing
program with lots of logic in use, and the attachment limitation
prevents usage of fentry/fexit for performance analysis (e.g. with
"bpftool prog profile" command) in this case. An example could be
falcosecurity libs project that uses tp_btf tracing programs.
Following the corresponding discussion [1], the reason for that is to
avoid tracing progs call cycles without introducing more complex
solutions. But currently it seems impossible to load and attach tracing
programs in a way that will form such a cycle. The limitation is coming
from the fact that attach_prog_fd is specified at the prog load (thus
making it impossible to attach to a program loaded after it in this
way), as well as tracing progs not implementing link_detach.
Replace "no same type" requirement with verification that no more than
one level of attachment nesting is allowed. In this way only one
fentry/fexit program could be attached to another fentry/fexit to cover
profiling use case, and still no cycle could be formed. To implement,
add a new field into bpf_prog_aux to track nested attachment for tracing
programs.
[1]: https://lore.kernel.org/bpf/20191108064039.2041889-16-ast@kernel.org/
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20240103190559.14750-2-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The driver core now can handle a const struct bus_type pointer, and the
dma_debug_add_bus() call just passes on the pointer give to it to the
driver core, so make this pointer const as well to allow everyone to use
read-only struct bus_type pointers going forward.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: <iommu@lists.linux.dev>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/2023121941-dejected-nugget-681e@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For percpu data structure allocation with bpf_global_percpu_ma,
the maximum data size is 4K. But for a system with large
number of cpus, bigger data size (e.g., 2K, 4K) might consume
a lot of memory. For example, the percpu memory consumption
with unit size 2K and 1024 cpus will be 2K * 1K * 1k = 2GB
memory.
We should discourage such usage. Let us limit the maximum data
size to be 512 for bpf_global_percpu_ma allocation.
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231222031801.1290841-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, refill low/high marks are set with the assumption
of normal non-percpu memory allocation. For example, for
an allocation size 256, for non-percpu memory allocation,
low mark is 32 and high mark is 96, resulting in the
batch allocation of 48 elements and the allocated memory
will be 48 * 256 = 12KB for this particular cpu.
Assuming an 128-cpu system, the total memory consumption
across all cpus will be 12K * 128 = 1.5MB memory.
This might be okay for non-percpu allocation, but may not be
good for percpu allocation, which will consume 1.5MB * 128 = 192MB
memory in the worst case if every cpu has a chance of memory
allocation.
In practice, percpu allocation is very rare compared to
non-percpu allocation. So let us have smaller low/high marks
which can avoid unnecessary memory consumption.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231222031755.1289671-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Typically for percpu map element or data structure, once allocated,
most operations are lookup or in-place update. Deletion are really
rare. Currently, for percpu data strcture, 4 elements will be
refilled if the size is <= 256. Let us just do with one element
for percpu data. For example, for size 256 and 128 cpus, the
potential saving will be 3 * 256 * 128 * 128 = 12MB.
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231222031750.1289290-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 41a5db8d81 ("Add support for non-fix-size percpu mem allocation")
added support for non-fix-size percpu memory allocation.
Such allocation will allocate percpu memory for all buckets on all
cpus and the memory consumption is in the order to quadratic.
For example, let us say, 4 cpus, unit size 16 bytes, so each
cpu has 16 * 4 = 64 bytes, with 4 cpus, total will be 64 * 4 = 256 bytes.
Then let us say, 8 cpus with the same unit size, each cpu
has 16 * 8 = 128 bytes, with 8 cpus, total will be 128 * 8 = 1024 bytes.
So if the number of cpus doubles, the number of memory consumption
will be 4 times. So for a system with large number of cpus, the
memory consumption goes up quickly with quadratic order.
For example, for 4KB percpu allocation, 128 cpus. The total memory
consumption will 4KB * 128 * 128 = 64MB. Things will become
worse if the number of cpus is bigger (e.g., 512, 1024, etc.)
In Commit 41a5db8d81, the non-fix-size percpu memory allocation is
done in boot time, so for system with large number of cpus, the initial
percpu memory consumption is very visible. For example, for 128 cpu
system, the total percpu memory allocation will be at least
(16 + 32 + 64 + 96 + 128 + 196 + 256 + 512 + 1024 + 2048 + 4096)
* 128 * 128 = ~138MB.
which is pretty big. It will be even bigger for larger number of cpus.
Note that the current prefill also allocates 4 entries if the unit size
is less than 256. So on top of 138MB memory consumption, this will
add more consumption with
3 * (16 + 32 + 64 + 96 + 128 + 196 + 256) * 128 * 128 = ~38MB.
Next patch will try to reduce this memory consumption.
Later on, Commit 1fda5bb66a ("bpf: Do not allocate percpu memory
at init stage") moved the non-fix-size percpu memory allocation
to bpf verificaiton stage. Once a particular bpf_percpu_obj_new()
is called by bpf program, the memory allocator will try to fill in
the cache with all sizes, causing the same amount of percpu memory
consumption as in the boot stage.
To reduce the initial percpu memory consumption for non-fix-size
percpu memory allocation, instead of filling the cache with all
supported allocation sizes, this patch intends to fill the cache
only for the requested size. As typically users will not use large
percpu data structure, this can save memory significantly.
For example, the allocation size is 64 bytes with 128 cpus.
Then total percpu memory amount will be 64 * 128 * 128 = 1MB,
much less than previous 138MB.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231222031745.1289082-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The objcg is a bpf_mem_alloc level property since all bpf_mem_cache's
are with the same objcg. This patch made such a property explicit.
The next patch will use this property to save and restore objcg
for percpu unit allocator.
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231222031739.1288590-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, for percpu memory allocation, say if the user
requests allocation size to be 32 bytes, the actually
calculated size will be 40 bytes and it further rounds
to 64 bytes, and eventually 64 bytes are allocated,
wasting 32-byte memory.
Change bpf_mem_alloc() to calculate the cache index
based on the user-provided allocation size so unnecessary
extra memory can be avoided.
Suggested-by: Hou Tao <houtao1@huawei.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231222031734.1288400-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch simplifies the verification of size arguments associated to
pointer arguments to helpers and kfuncs. Many helpers take a pointer
argument followed by the size of the memory access performed to be
performed through that pointer. Before this patch, the handling of the
size argument in check_mem_size_reg() was confusing and wasteful: if the
size register's lower bound was 0, then the verification was done twice:
once considering the size of the access to be the lower-bound of the
respective argument, and once considering the upper bound (even if the
two are the same). The upper bound checking is a super-set of the
lower-bound checking(*), except: the only point of the lower-bound check
is to handle the case where zero-sized-accesses are explicitly not
allowed and the lower-bound is zero. This static condition is now
checked explicitly, replacing a much more complex, expensive and
confusing verification call to check_helper_mem_access().
Error messages change in this patch. Before, messages about illegal
zero-size accesses depended on the type of the pointer and on other
conditions, and sometimes the message was plain wrong: in some tests
that changed you'll see that the old message was something like "R1 min
value is outside of the allowed memory range", where R1 is the pointer
register; the error was wrongly claiming that the pointer was bad
instead of the size being bad. Other times the information that the size
came for a register with a possible range of values was wrong, and the
error presented the size as a fixed zero. Now the errors refer to the
right register. However, the old error messages did contain useful
information about the pointer register which is now lost; recovering
this information was deemed not important enough.
(*) Besides standing to reason that the checks for a bigger size access
are a super-set of the checks for a smaller size access, I have also
mechanically verified this by reading the code for all types of
pointers. I could convince myself that it's true for all but
PTR_TO_BTF_ID (check_ptr_to_btf_access). There, simply looking
line-by-line does not immediately prove what we want. If anyone has any
qualms, let me know.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231221232225.568730-2-andreimatei1@gmail.com
In preparation for subsequent changes, introduce a specialized variant
of async_schedule_dev() that will not invoke the argument function
synchronously when it cannot be scheduled for asynchronous execution.
The new function, async_schedule_dev_nocall(), will be used for fixing
possible deadlocks in the system-wide power management core code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> for the series.
Tested-by: Youngmin Nam <youngmin.nam@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
In preparation for subsequent changes, split async_schedule_node_domain()
in two pieces so as to allow the bottom part of it to be called from a
somewhat different code path.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Tested-by: Youngmin Nam <youngmin.nam@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Introduce thermal_zone_device_critical_reboot() to trigger an
emergency reboot.
It is a counterpart of thermal_zone_device_critical() with the
difference that it will force a reboot instead of shutdown.
The motivation for doing this is to allow the thermal subystem
to trigger a reboot when the temperature reaches the critical
temperature.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231129124330.519423-3-festevam@gmail.com
Add some helper functions to make it easier introducing the support
for thermal reboot.
No functional change.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231129124330.519423-2-festevam@gmail.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZYVEqQAKCRDbK58LschI
gzH6AP9hVXLpHFTWMT0+2GK2lx69VX8zW1C0SmN7WHaxUbPN9QEAwzGnELfKk00P
0IKRHSl5abhVMX7JOM3sSOhCILeKjQg=
=wRLJ
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next-for-netdev
The following pull-request contains BPF updates for your *net-next* tree.
We've added 22 non-merge commits during the last 3 day(s) which contain
a total of 23 files changed, 652 insertions(+), 431 deletions(-).
The main changes are:
1) Add verifier support for annotating user's global BPF subprogram arguments
with few commonly requested annotations for a better developer experience,
from Andrii Nakryiko.
These tags are:
- Ability to annotate a special PTR_TO_CTX argument
- Ability to annotate a generic PTR_TO_MEM as non-NULL
2) Support BPF verifier tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like, from
Menglong Dong.
3) Fix a warning in bpf_mem_cache's check_obj_size() as reported by LKP, from Hou Tao.
4) Re-support uid/gid options when mounting bpffs which had to be reverted with
the prior token series revert to avoid conflicts, from Daniel Borkmann.
5) Fix a libbpf NULL pointer dereference in bpf_object__collect_prog_relos() found
from fuzzing the library with malformed ELF files, from Mingyi Zhang.
6) Skip DWARF sections in libbpf's linker sanity check given compiler options to
generate compressed debug sections can trigger a rejection due to misalignment,
from Alyssa Ross.
7) Fix an unnecessary use of the comma operator in BPF verifier, from Simon Horman.
8) Fix format specifier for unsigned long values in cpustat sample, from Colin Ian King.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix readers that are blocked on the ring buffer when buffer_percent is
100%. They are supposed to wake up when the buffer is full, but
because the sub-buffer that the writer is on is never considered
"dirty" in the calculation, dirty pages will never equal nr_pages.
Add +1 to the dirty count in order to count for the sub-buffer that
the writer is on.
- When a reader is blocked on the "snapshot_raw" file, it is to be
woken up when a snapshot is done and be able to read the snapshot
buffer. But because the snapshot swaps the buffers (the main one
with the snapshot one), and the snapshot reader is waiting on the
old snapshot buffer, it was not woken up (because it is now on
the main buffer after the swap). Worse yet, when it reads the buffer
after a snapshot, it's not reading the snapshot buffer, it's reading
the live active main buffer.
Fix this by forcing a wakeup of all readers on the snapshot buffer when
a new snapshot happens, and then update the buffer that the reader
is reading to be back on the snapshot buffer.
- Fix the modification of the direct_function hash. There was a race
when new functions were added to the direct_function hash as when
it moved function entries from the old hash to the new one, a direct
function trace could be hit and not see its entry.
This is fixed by allocating the new hash, copy all the old entries
onto it as well as the new entries, and then use rcu_assign_pointer()
to update the new direct_function hash with it.
This also fixes a memory leak in that code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZZAzTxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qs9IAP9e6wZ74aEjMED9nsbC49EpyCNTqa72
y0uDS/p9ppv52gD7Be+l+kJQzYNh6bZU0+B19hNC2QVn38jb7sOadfO/1Q8=
=NDkf
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix readers that are blocked on the ring buffer when buffer_percent
is 100%. They are supposed to wake up when the buffer is full, but
because the sub-buffer that the writer is on is never considered
"dirty" in the calculation, dirty pages will never equal nr_pages.
Add +1 to the dirty count in order to count for the sub-buffer that
the writer is on.
- When a reader is blocked on the "snapshot_raw" file, it is to be
woken up when a snapshot is done and be able to read the snapshot
buffer. But because the snapshot swaps the buffers (the main one with
the snapshot one), and the snapshot reader is waiting on the old
snapshot buffer, it was not woken up (because it is now on the main
buffer after the swap). Worse yet, when it reads the buffer after a
snapshot, it's not reading the snapshot buffer, it's reading the live
active main buffer.
Fix this by forcing a wakeup of all readers on the snapshot buffer
when a new snapshot happens, and then update the buffer that the
reader is reading to be back on the snapshot buffer.
- Fix the modification of the direct_function hash. There was a race
when new functions were added to the direct_function hash as when it
moved function entries from the old hash to the new one, a direct
function trace could be hit and not see its entry.
This is fixed by allocating the new hash, copy all the old entries
onto it as well as the new entries, and then use rcu_assign_pointer()
to update the new direct_function hash with it.
This also fixes a memory leak in that code.
- Fix eventfs ownership
* tag 'trace-v6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix modification of direct_function hash while in use
tracing: Fix blocked reader of snapshot buffer
ring-buffer: Fix wake ups when buffer_percent is set to 100
eventfs: Fix file and directory uid and gid ownership
Directly return NULL or 'next' instead of breaking out of the loop.
Signed-off-by: David Laight <david.laight@aculab.com>
[ Split original patch into two independent parts - Linus ]
Link: https://lore.kernel.org/lkml/7c8828aec72e42eeb841ca0ee3397e9a@AcuMS.aculab.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
osq_wait_next() is passed 'prev' from osq_lock() and NULL from
osq_unlock() but only needs the 'cpu' value to write to lock->tail.
Just pass prev->cpu or OSQ_UNLOCKED_VAL instead.
Should have no effect on the generated code since gcc manages to assume
that 'prev != NULL' due to an earlier dereference.
Signed-off-by: David Laight <david.laight@aculab.com>
[ Changed 'old' to 'old_cpu' by request from Waiman Long - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
struct optimistic_spin_node is private to the implementation.
Move it into the C file to ensure nothing is accessing it.
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masami Hiramatsu reported a memory leak in register_ftrace_direct() where
if the number of new entries are added is large enough to cause two
allocations in the loop:
for (i = 0; i < size; i++) {
hlist_for_each_entry(entry, &hash->buckets[i], hlist) {
new = ftrace_add_rec_direct(entry->ip, addr, &free_hash);
if (!new)
goto out_remove;
entry->direct = addr;
}
}
Where ftrace_add_rec_direct() has:
if (ftrace_hash_empty(direct_functions) ||
direct_functions->count > 2 * (1 << direct_functions->size_bits)) {
struct ftrace_hash *new_hash;
int size = ftrace_hash_empty(direct_functions) ? 0 :
direct_functions->count + 1;
if (size < 32)
size = 32;
new_hash = dup_hash(direct_functions, size);
if (!new_hash)
return NULL;
*free_hash = direct_functions;
direct_functions = new_hash;
}
The "*free_hash = direct_functions;" can happen twice, losing the previous
allocation of direct_functions.
But this also exposed a more serious bug.
The modification of direct_functions above is not safe. As
direct_functions can be referenced at any time to find what direct caller
it should call, the time between:
new_hash = dup_hash(direct_functions, size);
and
direct_functions = new_hash;
can have a race with another CPU (or even this one if it gets interrupted),
and the entries being moved to the new hash are not referenced.
That's because the "dup_hash()" is really misnamed and is really a
"move_hash()". It moves the entries from the old hash to the new one.
Now even if that was changed, this code is not proper as direct_functions
should not be updated until the end. That is the best way to handle
function reference changes, and is the way other parts of ftrace handles
this.
The following is done:
1. Change add_hash_entry() to return the entry it created and inserted
into the hash, and not just return success or not.
2. Replace ftrace_add_rec_direct() with add_hash_entry(), and remove
the former.
3. Allocate a "new_hash" at the start that is made for holding both the
new hash entries as well as the existing entries in direct_functions.
4. Copy (not move) the direct_function entries over to the new_hash.
5. Copy the entries of the added hash to the new_hash.
6. If everything succeeds, then use rcu_pointer_assign() to update the
direct_functions with the new_hash.
This simplifies the code and fixes both the memory leak as well as the
race condition mentioned above.
Link: https://lore.kernel.org/all/170368070504.42064.8960569647118388081.stgit@devnote2/
Link: https://lore.kernel.org/linux-trace-kernel/20231229115134.08dd5174@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 763e34e74b ("ftrace: Add register_ftrace_direct()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If, as part of handling a hardlockup or softlockup, we've already dumped
all CPUs and we're just about to panic, don't reenable dumping and give
some other CPU a chance to hop in there and add some confusing logs right
as the panic is happening.
Link: https://lkml.kernel.org/r/20231220131534.4.Id3a9c7ec2d7d83e4080da6f8662ba2226b40543f@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Li Zhe <lizhe.67@bytedance.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If two CPUs end up reporting a hardlockup at the same time then their logs
could get interleaved which is hard to read.
The interleaving problem was especially bad with the "perf" hardlockup
detector where the locked up CPU is always the same as the running CPU and
we end up in show_regs(). show_regs() has no inherent serialization so we
could mix together two crawls if two hardlockups happened at the same time
(and if we didn't have `sysctl_hardlockup_all_cpu_backtrace` set). With
this change we'll fully serialize hardlockups when using the "perf"
hardlockup detector.
The interleaving problem was less bad with the "buddy" hardlockup
detector. With "buddy" we always end up calling
`trigger_single_cpu_backtrace(cpu)` on some CPU other than the running
one. trigger_single_cpu_backtrace() always at least serializes the
individual stack crawls because it eventually uses
printk_cpu_sync_get_irqsave(). Unfortunately the fact that
trigger_single_cpu_backtrace() eventually calls
printk_cpu_sync_get_irqsave() (on a different CPU) means that we have to
drop the "lock" before calling it and we can't fully serialize all
printouts associated with a given hardlockup. However, we still do get
the advantage of serializing the output of print_modules() and
print_irqtrace_events().
Aside from serializing hardlockups from each other, this change also has
the advantage of serializing hardlockups and softlockups from each other
if they happen to happen at the same time since they are both using the
same "lock".
Even though nobody is expected to hang while holding the lock associated
with printk_cpu_sync_get_irqsave(), out of an abundance of caution, we
don't call printk_cpu_sync_get_irqsave() until after we print out about
the hardlockup. This makes extra sure that, even if
printk_cpu_sync_get_irqsave() somehow never runs we at least print that we
saw the hardlockup. This is different than the choice made for softlockup
because hardlockup is really our last resort.
Link: https://lkml.kernel.org/r/20231220131534.3.I6ff691b3b40f0379bc860f80c6e729a0485b5247@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Li Zhe <lizhe.67@bytedance.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of introducing a spinlock, use printk_cpu_sync_get_irqsave() and
printk_cpu_sync_put_irqrestore() to serialize softlockup reporting. Alone
this doesn't have any real advantage over the spinlock, but this will
allow us to use the same function in a future change to also serialize
hardlockup crawls.
NOTE: for the most part this serialization is important because we often
end up in the show_regs() path and that has no built-in serialization if
there are multiple callers at once. However, even in the case where we
end up in the dump_stack() path this still has some advantages because the
stack will be guaranteed to be together in the logs with the lockup
message with no interleaving.
NOTE: the fact that printk_cpu_sync_get_irqsave() is allowed to be called
multiple times on the same CPU is important here. Specifically we hold
the "lock" while calling dump_stack() which also gets the same "lock".
This is explicitly documented to be OK and means we don't need to
introduce a variant of dump_stack() that doesn't grab the lock.
Link: https://lkml.kernel.org/r/20231220131534.2.Ia5906525d440d8e8383cde31b7c61c2aadc8f907@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Li Zhe <lizhe.67@bytedance.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "watchdog: Better handling of concurrent lockups".
When we get multiple lockups at roughly the same time, the output in the
kernel logs can be very confusing since the reports about the lockups end
up interleaved in the logs. There is some code in the kernel to try to
handle this but it wasn't that complete.
Li Zhe recently made this a bit better for softlockups (specifically for
the case where `kernel.softlockup_all_cpu_backtrace` is not set) in commit
9d02330abd ("softlockup: serialized softlockup's log"), but that only
handled softlockup reports. Hardlockup reports still had similar issues.
This series also has a small fix to avoid dumping all stacks a second time
in the case of a panic. This is a bit unrelated to the interleaving fixes
but it does also improve the clarity of lockup reports.
This patch (of 4):
The hardlockup detector and softlockup detector both have the ability to
dump the stack of all CPUs (`kernel.hardlockup_all_cpu_backtrace` and
`kernel.softlockup_all_cpu_backtrace`). Both detectors also have some
logic to attempt to avoid interleaving printouts if two CPUs were trying
to do dumps of all CPUs at the same time. However:
- The hardlockup detector's logic still allowed interleaving some
information. Specifically another CPU could print modules and dump
the stack of the locked CPU at the same time we were dumping all
CPUs.
- In the case where `kernel.hardlockup_panic` was set in addition to
`kernel.hardlockup_all_cpu_backtrace`, when two CPUs both detected
hardlockups at the same time the second CPU could call panic() while
the first was still dumping stacks. This was especially bad if the
locked up CPU wasn't responding to the request for a backtrace since
the function nmi_trigger_cpumask_backtrace() can wait up to 10
seconds.
Let's resolve this by adopting the softlockup logic in the hardlockup
handler.
NOTES:
- As part of this, one might think that we should make a helper
function that both the hard and softlockup detectors call. This
turns out not to be super trivial since it would have to be
parameterized quite a bit since there are separate global variables
controlling each lockup detector and they print log messages that
are just different enough that it would be a pain. We probably don't
want to change the messages that are printed without good reason to
avoid throwing log parsers for a loop.
- One might also think that it would be a good idea to have the
hardlockup and softlockup detector use the same global variable to
prevent interleaving. This would make sure that softlockups and
hardlockups can't interleave each other. That _almost_ works but has
a dangerous flaw if `kernel.hardlockup_panic` is not the same as
`kernel.softlockup_panic` because we might skip a call to panic() if
one type of lockup was detected at the same time as another.
Link: https://lkml.kernel.org/r/20231220211640.2023645-1-dianders@chromium.org
Link: https://lkml.kernel.org/r/20231220131534.1.I4f35a69fbb124b5f0c71f75c631e11fabbe188ff@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Li Zhe <lizhe.67@bytedance.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
image->control_page represents the starting address for allocating the
next control page, while hole_end represents the address of the last valid
byte of the currently allocated control page.
This bug actually does not affect the correctness of allocating control
pages, because image->control_page is currently only used in
kimage_alloc_crash_control_pages(), and this function, when allocating
control pages, will first align image->control_page up to the nearest
`(1 << order) << PAGE_SHIFT` boundary, then use this value as the
starting address of the next control page. This ensures that the newly
allocated control page will use the correct starting address and not
overlap with previously allocated control pages.
Although it does not affect the correctness of the final result, it is
better for us to set image->control_page to the correct value, in case
it might be used elsewhere in the future, potentially causing errors.
Therefore, after successfully allocating a control page,
image->control_page should be updated to `hole_end + 1`, rather than
hole_end.
Link: https://lkml.kernel.org/r/20231221042308.11076-1-ytcoode@gmail.com
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Change @task to @tsk to prevent kernel-doc warnings:
kernel/stacktrace.c:138: warning: Excess function parameter 'task' description in 'stack_trace_save_tsk'
kernel/stacktrace.c:138: warning: Function parameter or member 'tsk' not described in 'stack_trace_save_tsk'
Link: https://lkml.kernel.org/r/20231220054945.17663-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Documentation/filesystems/relay.rst says to use
return debugfs_create_file(filename, mode, parent, buf,
&relay_file_operations);
and this is the only way relay_file_operations is used.
Thus: debugfs_create_file(&relay_file_operations)
-> __debugfs_create_file(&debugfs_full_proxy_file_operations,
&relay_file_operations)
-> dentry{inode: {i_fop: &debugfs_full_proxy_file_operations},
d_fsdata: &relay_file_operations
| DEBUGFS_FSDATA_IS_REAL_FOPS_BIT}
debugfs_full_proxy_file_operations.open is full_proxy_open, which extracts
the &relay_file_operations from the dentry, and allocates via
__full_proxy_fops_init() new fops, with trivial wrappers around release,
llseek, read, write, poll, and unlocked_ioctl, then replaces the fops on
the opened file therewith.
Naturally, all thusly-created debugfs files have .splice_read = NULL.
This was introduced in commit 49d200deaa ("debugfs: prevent access to
removed files' private data") from 2016-03-22.
AFAICT, relay_file_operations is the only struct file_operations used for
debugfs which defines a .splice_read callback. Hooking it up with
> diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
> index 5063434be0fc..952fcf5b2afa 100644
> --- a/fs/debugfs/file.c
> +++ b/fs/debugfs/file.c
> @@ -328,6 +328,11 @@ FULL_PROXY_FUNC(write, ssize_t, filp,
> loff_t *ppos),
> ARGS(filp, buf, size, ppos));
>
> +FULL_PROXY_FUNC(splice_read, long, in,
> + PROTO(struct file *in, loff_t *ppos, struct pipe_inode_info *pipe,
> + size_t len, unsigned int flags),
> + ARGS(in, ppos, pipe, len, flags));
> +
> FULL_PROXY_FUNC(unlocked_ioctl, long, filp,
> PROTO(struct file *filp, unsigned int cmd, unsigned long arg),
> ARGS(filp, cmd, arg));
> @@ -382,6 +387,8 @@ static void __full_proxy_fops_init(struct file_operations *proxy_fops,
> proxy_fops->write = full_proxy_write;
> if (real_fops->poll)
> proxy_fops->poll = full_proxy_poll;
> + if (real_fops->splice_read)
> + proxy_fops->splice_read = full_proxy_splice_read;
> if (real_fops->unlocked_ioctl)
> proxy_fops->unlocked_ioctl = full_proxy_unlocked_ioctl;
> }
shows it just doesn't work, and splicing always instantly returns empty
(subsequent reads actually return the contents).
No-one noticed it became dead code in 2016, who knows if it worked back
then. Clearly no-one cares; just delete it.
Link: https://lkml.kernel.org/r/dtexwpw6zcdx7dkx3xj5gyjp5syxmyretdcbcdtvrnukd4vvuh@tarta.nabijaczleweli.xyz
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Li kunyu <kunyu@nfschina.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zhang Zhengming <zhang.zhengming@h3c.com>
Cc: Zhao Lei <zhao_lei1@hoperun.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
temp_end represents the address of the last available byte. Therefore,
the starting address of the memory segment with temp_end as its last
available byte and a size of `kbuf->memsz`, that is, the value of
temp_start, should be `temp_end - kbuf->memsz + 1` instead of `temp_end -
kbuf->memsz`.
Additionally, use the ALIGN_DOWN macro instead of open-coding it directly
in locate_mem_hole_top_down() to improve code readability.
Link: https://lkml.kernel.org/r/20231217033528.303333-3-ytcoode@gmail.com
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The end parameter received by kimage_is_destination_range() should be the
last valid byte address of the target memory segment plus 1. However, in
the locate_mem_hole_bottom_up() and locate_mem_hole_top_down() functions,
the corresponding value passed to kimage_is_destination_range() is the
last valid byte address of the target memory segment, which is 1 less.
There are two ways to fix this bug. We can either correct the logic of
the locate_mem_hole_bottom_up() and locate_mem_hole_top_down() functions,
or we can fix kimage_is_destination_range() by making the end parameter
represent the last valid byte address of the target memory segment. Here,
we choose the second approach.
Due to the modification to kimage_is_destination_range(), we also need to
adjust its callers, such as kimage_alloc_normal_control_pages() and
kimage_alloc_page().
Link: https://lkml.kernel.org/r/20231217033528.303333-2-ytcoode@gmail.com
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We already have the folio in these functions, we just need to use it.
folio_add_new_anon_rmap() didn't exist at the time they were converted to
folios.
Link: https://lkml.kernel.org/r/20231211162214.2146080-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If an application blocks on the snapshot or snapshot_raw files, expecting
to be woken up when a snapshot occurs, it will not happen. Or it may
happen with an unexpected result.
That result is that the application will be reading the main buffer
instead of the snapshot buffer. That is because when the snapshot occurs,
the main and snapshot buffers are swapped. But the reader has a descriptor
still pointing to the buffer that it originally connected to.
This is fine for the main buffer readers, as they may be blocked waiting
for a watermark to be hit, and when a snapshot occurs, the data that the
main readers want is now on the snapshot buffer.
But for waiters of the snapshot buffer, they are waiting for an event to
occur that will trigger the snapshot and they can then consume it quickly
to save the snapshot before the next snapshot occurs. But to do this, they
need to read the new snapshot buffer, not the old one that is now
receiving new data.
Also, it does not make sense to have a watermark "buffer_percent" on the
snapshot buffer, as the snapshot buffer is static and does not receive new
data except all at once.
Link: https://lore.kernel.org/linux-trace-kernel/20231228095149.77f5b45d@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: debdd57f51 ("tracing: Make a snapshot feature available from userspace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The tracefs file "buffer_percent" is to allow user space to set a
water-mark on how much of the tracing ring buffer needs to be filled in
order to wake up a blocked reader.
0 - is to wait until any data is in the buffer
1 - is to wait for 1% of the sub buffers to be filled
50 - would be half of the sub buffers are filled with data
100 - is not to wake the waiter until the ring buffer is completely full
Unfortunately the test for being full was:
dirty = ring_buffer_nr_dirty_pages(buffer, cpu);
return (dirty * 100) > (full * nr_pages);
Where "full" is the value for "buffer_percent".
There is two issues with the above when full == 100.
1. dirty * 100 > 100 * nr_pages will never be true
That is, the above is basically saying that if the user sets
buffer_percent to 100, more pages need to be dirty than exist in the
ring buffer!
2. The page that the writer is on is never considered dirty, as dirty
pages are only those that are full. When the writer goes to a new
sub-buffer, it clears the contents of that sub-buffer.
That is, even if the check was ">=" it would still not be equal as the
most pages that can be considered "dirty" is nr_pages - 1.
To fix this, add one to dirty and use ">=" in the compare.
Link: https://lore.kernel.org/linux-trace-kernel/20231226125902.4a057f1d@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 03329f9939 ("tracing: Add tracefs file buffer_percentage")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When a CPU is taken offline, the contribution of its cfs_rqs to task_groups'
load may remain and will negatively impact the calculation of the share of
the online CPUs.
To fix this bug, clear the contribution of an offlining CPU to task groups'
load and skip its contribution while it is inactive.
Here's the reproducer of the anomaly, by Imran Khan:
"So far I have encountered only one rather lengthy way of reproducing this issue,
which is as follows:
1. Take a KVM guest (booted with 4 CPUs and can be scaled up to 124 CPUs) and
create 2 custom cgroups: /sys/fs/cgroup/cpu/test_group_1 and /sys/fs/cgroup/
cpu/test_group_2
2. Assign a CPU intensive workload to each of these cgroups and start the
workload.
For my tests I am using following app:
int main(int argc, char *argv[])
{
unsigned long count, i, val;
if (argc != 2) {
printf("usage: ./a.out <number of random nums to generate> \n");
return 0;
}
count = strtoul(argv[1], NULL, 10);
printf("Generating %lu random numbers \n", count);
for (i = 0; i < count; i++) {
val = rand();
val = val % 2;
//usleep(1);
}
printf("Generated %lu random numbers \n", count);
return 0;
}
Also since the system is booted with 4 CPUs, in order to completely load the
system I am also launching 4 instances of same test app under:
/sys/fs/cgroup/cpu/
3. We can see that both of the cgroups get similar CPU time:
# systemd-cgtop --depth 1
Path Tasks %CPU Memory Input/s Output/s
/ 659 - 5.5G - -
/system.slice - - 5.7G - -
/test_group_1 4 - - - -
/test_group_2 3 - - - -
/user.slice 31 - 56.5M - -
Path Tasks %CPU Memory Input/s Output/s
/ 659 394.6 5.5G - -
/test_group_2 3 65.7 - - -
/user.slice 29 55.1 48.0M - -
/test_group_1 4 47.3 - - -
/system.slice - 2.2 5.7G - -
Path Tasks %CPU Memory Input/s Output/s
/ 659 394.8 5.5G - -
/test_group_1 4 62.9 - - -
/user.slice 28 44.9 54.2M - -
/test_group_2 3 44.7 - - -
/system.slice - 0.9 5.7G - -
Path Tasks %CPU Memory Input/s Output/s
/ 659 394.4 5.5G - -
/test_group_2 3 58.8 - - -
/test_group_1 4 51.9 - - -
/user.slice 30 39.3 59.6M - -
/system.slice - 1.9 5.7G - -
Path Tasks %CPU Memory Input/s Output/s
/ 659 394.7 5.5G - -
/test_group_1 4 60.9 - - -
/test_group_2 3 57.9 - - -
/user.slice 28 43.5 36.9M - -
/system.slice - 3.0 5.7G - -
Path Tasks %CPU Memory Input/s Output/s
/ 659 395.0 5.5G - -
/test_group_1 4 66.8 - - -
/test_group_2 3 56.3 - - -
/user.slice 29 43.1 51.8M - -
/system.slice - 0.7 5.7G - -
4. Now move systemd-udevd to one of these test groups, say test_group_1, and
perform scale up to 124 CPUs followed by scale down back to 4 CPUs from the
host side.
5. Run the same workload i.e 4 instances of CPU hogger under /sys/fs/cgroup/cpu
and one instance of CPU hogger each in /sys/fs/cgroup/cpu/test_group_1 and
/sys/fs/cgroup/test_group_2.
It can be seen that test_group_1 (the one where systemd-udevd was moved) is getting
much less CPU time than the test_group_2, even though at this point of time both of
these groups have only CPU hogger running:
# systemd-cgtop --depth 1
Path Tasks %CPU Memory Input/s Output/s
/ 1219 - 5.4G - -
/system.slice - - 5.6G - -
/test_group_1 4 - - - -
/test_group_2 3 - - - -
/user.slice 26 - 91.3M - -
Path Tasks %CPU Memory Input/s Output/s
/ 1221 394.3 5.4G - -
/test_group_2 3 82.7 - - -
/test_group_1 4 14.3 - - -
/system.slice - 0.8 5.6G - -
/user.slice 26 0.4 91.2M - -
Path Tasks %CPU Memory Input/s Output/s
/ 1221 394.6 5.4G - -
/test_group_2 3 67.4 - - -
/system.slice - 24.6 5.6G - -
/test_group_1 4 12.5 - - -
/user.slice 26 0.4 91.2M - -
Path Tasks %CPU Memory Input/s Output/s
/ 1221 395.2 5.4G - -
/test_group_2 3 60.9 - - -
/system.slice - 27.9 5.6G - -
/test_group_1 4 12.2 - - -
/user.slice 26 0.4 91.2M - -
Path Tasks %CPU Memory Input/s Output/s
/ 1221 395.2 5.4G - -
/test_group_2 3 69.4 - - -
/test_group_1 4 13.9 - - -
/user.slice 28 1.6 92.0M - -
/system.slice - 1.0 5.6G - -
Path Tasks %CPU Memory Input/s Output/s
/ 1221 395.6 5.4G - -
/test_group_2 3 59.3 - - -
/test_group_1 4 14.1 - - -
/user.slice 28 1.3 92.2M - -
/system.slice - 0.7 5.6G - -
Path Tasks %CPU Memory Input/s Output/s
/ 1221 395.5 5.4G - -
/test_group_2 3 67.2 - - -
/test_group_1 4 11.5 - - -
/user.slice 28 1.3 92.5M - -
/system.slice - 0.6 5.6G - -
Path Tasks %CPU Memory Input/s Output/s
/ 1221 395.1 5.4G - -
/test_group_2 3 76.8 - - -
/test_group_1 4 12.9 - - -
/user.slice 28 1.3 92.8M - -
/system.slice - 1.2 5.6G - -
From sched_debug data it can be seen that in bad case the load.weight of per-CPU
sched entities corresponding to test_group_1 has reduced significantly and
also load_avg of test_group_1 remains much higher than that of test_group_2,
even though systemd-udevd stopped running long time back and at this point of
time both cgroups just have the CPU hogger app as running entity."
[ mingo: Added details from the original discussion, plus minor edits to the patch. ]
Reported-by: Imran Khan <imran.f.khan@oracle.com>
Tested-by: Imran Khan <imran.f.khan@oracle.com>
Tested-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Imran Khan <imran.f.khan@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lore.kernel.org/r/20231223111545.62135-1-vincent.guittot@linaro.org
are not considered backporting material.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZYys4AAKCRDdBJ7gKXxA
jtmaAQC+o04Ia7IfB8MIqp1p7dNZQo64x/EnGA8YjUnQ8N6IwQD+ImU7dHl9g9Oo
ROiiAbtMRBUfeJRsExX/Yzc1DV9E9QM=
=ZGcs
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues
or are not considered backporting material"
* tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add an old address for Naoya Horiguchi
mm/memory-failure: cast index to loff_t before shifting it
mm/memory-failure: check the mapcount of the precise page
mm/memory-failure: pass the folio and the page to collect_procs()
selftests: secretmem: floor the memory size to the multiple of page_size
mm: migrate high-order folios in swap cache correctly
maple_tree: do not preallocate nodes for slot stores
mm/filemap: avoid buffered read/write race to read inconsistent data
kunit: kasan_test: disable fortify string checker on kmalloc_oob_memset
kexec: select CRYPTO from KEXEC_FILE instead of depending on it
kexec: fix KEXEC_FILE dependencies
by moving cond_resched_rcu() to rcupdate_wait.h, we can kill another big
sched.h dependency.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're trying to get sched.h down to more or less just types only, not
code - rseq can live in its own header.
This helps us kill the dependency on preempt.h in sched.h.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Running N CPU-bound tasks on an N CPUs platform:
- with asymmetric CPU capacity
- not being a DynamIq system (i.e. having a PKG level sched domain
without the SD_SHARE_PKG_RESOURCES flag set)
.. might result in a task placement where two tasks run on a big CPU
and none on a little CPU. This placement could be more optimal by
using all CPUs.
Testing platform:
Juno-r2:
- 2 big CPUs (1-2), maximum capacity of 1024
- 4 little CPUs (0,3-5), maximum capacity of 383
Testing workload ([1]):
Spawn 6 CPU-bound tasks. During the first 100ms (step 1), each tasks
is affine to a CPU, except for:
- one little CPU which is left idle.
- one big CPU which has 2 tasks affine.
After the 100ms (step 2), remove the cpumask affinity.
Behavior before the patch:
During step 2, the load balancer running from the idle CPU tags sched
domains as:
- little CPUs: 'group_has_spare'. Cf. group_has_capacity() and
group_is_overloaded(), 3 CPU-bound tasks run on a 4 CPUs
sched-domain, and the idle CPU provides enough spare capacity
regarding the imbalance_pct
- big CPUs: 'group_overloaded'. Indeed, 3 tasks run on a 2 CPUs
sched-domain, so the following path is used:
group_is_overloaded()
\-if (sgs->sum_nr_running <= sgs->group_weight) return true;
The following path which would change the migration type to
'migrate_task' is not taken:
calculate_imbalance()
\-if (env->idle != CPU_NOT_IDLE && env->imbalance == 0)
as the local group has some spare capacity, so the imbalance
is not 0.
The migration type requested is 'migrate_util' and the busiest
runqueue is the big CPU's runqueue having 2 tasks (each having a
utilization of 512). The idle little CPU cannot pull one of these
task as its capacity is too small for the task. The following path
is used:
detach_tasks()
\-case migrate_util:
\-if (util > env->imbalance) goto next;
After the patch:
As the number of failed balancing attempts grows (with
'nr_balance_failed'), progressively make it easier to migrate
a big task to the idling little CPU. A similar mechanism is
used for the 'migrate_load' migration type.
Improvement:
Running the testing workload [1] with the step 2 representing
a ~10s load for a big CPU:
Before patch: ~19.3s
After patch: ~18s (-6.7%)
Similar issue reported at:
https://lore.kernel.org/lkml/20230716014125.139577-1-qyousef@layalina.io/
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Qais Yousef <qyousef@layalina.io>
Link: https://lore.kernel.org/r/20231206090043.634697-1-pierre.gondois@arm.com
With UTIL_EST_FASTUP now being permanent, we can take advantage of the
fact that the ewma jumps directly to a higher utilization at dequeue to
simplify util_est and remove the enqueued field.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Hongyan Xia <hongyan.xia2@arm.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20231201161652.1241695-3-vincent.guittot@linaro.org
sched_feat(UTIL_EST_FASTUP) has been added to easily disable the feature
in order to check for possibly related regressions. After 3 years, it has
never been used and no regression has been reported. Let's remove it
and make fast increase a permanent behavior.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Hongyan Xia <hongyan.xia2@arm.com>
Reviewed-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn> [for the Chinese translation]
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20231201161652.1241695-2-vincent.guittot@linaro.org
cpuinfo.max_freq can change at runtime because of boost as an example. This
implies that the value could be different than the one that has been
used when computing the capacity of a CPU.
The new arch_scale_freq_ref() returns a fixed and coherent reference
frequency that can be used when computing a frequency based on utilization.
Use this arch_scale_freq_ref() when available and fallback to
policy otherwise.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20231211104855.558096-4-vincent.guittot@linaro.org
Although it does not seem to have any untoward side-effects, the use
of ';' to separate to assignments seems more appropriate than ','.
Flagged by clang-17 -Wcomma
No functional change intended. Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20231221-bpf-verifier-comma-v1-1-cde2530912e9@kernel.org
- Fix another kerneldoc warning
- Fix eventfs files to inherit the ownership of its parent directory.
The dynamic creating of dentries in eventfs did not take into
account if the tracefs file system was mounted with a gid/uid,
and would still default to the gid/uid of root. This is a regression.
- Fix warning when synthetic event testing is enabled along with
startup event tracing testing is enabled
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZYRYjhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qs0aAQCXWcBeDEWsi8VxAOBU5Q6isvXn2koM
+xSX6LJPh6hFVAD+Pc3oLgvyE5IyqNUM9RYtpwPVMhpAsyE9FIz3TWarEww=
=LY0i
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.7-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix another kerneldoc warning
- Fix eventfs files to inherit the ownership of its parent directory.
The dynamic creation of dentries in eventfs did not take into account
if the tracefs file system was mounted with a gid/uid, and would
still default to the gid/uid of root. This is a regression.
- Fix warning when synthetic event testing is enabled along with
startup event tracing testing is enabled
* tag 'trace-v6.7-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing / synthetic: Disable events after testing in synth_event_gen_test_init()
eventfs: Have event files and directories default to parent uid and gid
tracing/synthetic: fix kernel-doc warnings
The comparisons to PAGE_SIZE were all converted to use the
buffer->subbuf_order, but the use of PAGE_MASK was missed.
Convert all the PAGE_MASK usages over to:
(PAGE_SIZE << cpu_buffer->buffer->subbuf_order) - 1
Link: https://lore.kernel.org/linux-trace-kernel/20231219173800.66eefb7a@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Fixes: 139f840021 ("ring-buffer: Page size per ring buffer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Using page order for deciding what the size of the ring buffer sub buffers
are is exposing a bit too much of the implementation. Although the sub
buffers are only allocated in orders of pages, allow the user to specify
the minimum size of each sub-buffer via kilobytes like they can with the
buffer size itself.
If the user specifies 3 via:
echo 3 > buffer_subbuf_size_kb
Then the sub-buffer size will round up to 4kb (on a 4kb page size system).
If they specify:
echo 6 > buffer_subbuf_size_kb
The sub-buffer size will become 8kb.
and so on.
Link: https://lore.kernel.org/linux-trace-kernel/20231219185631.809766769@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ring_buffer_subbuf_order_set() was creating ring_buffer_per_cpu
cpu_buffers with the new subbuffers with the updated order, and if they
all successfully were created, then they the ring_buffer's per_cpu buffers
would be freed and replaced by them.
The problem is that the freed per_cpu buffers contains state that would be
lost. Running the following commands:
1. # echo 3 > /sys/kernel/tracing/buffer_subbuf_order
2. # echo 0 > /sys/kernel/tracing/tracing_cpumask
3. # echo 1 > /sys/kernel/tracing/snapshot
4. # echo ff > /sys/kernel/tracing/tracing_cpumask
5. # echo test > /sys/kernel/tracing/trace_marker
Would result in:
-bash: echo: write error: Bad file descriptor
That's because the state of the per_cpu buffers of the snapshot buffer is
lost when the order is changed (the order of a freed snapshot buffer goes
to 0 to save memory, and when the snapshot buffer is allocated again, it
goes back to what the main buffer is).
In operation 2, the snapshot buffers were set to "disable" (as all the
ring buffers CPUs were disabled).
In operation 3, the snapshot is allocated and a call to
ring_buffer_subbuf_order_set() replaced the per_cpu buffers losing the
"record_disable" count.
When it was enabled again, the atomic_dec(&cpu_buffer->record_disable) was
decrementing a zero, setting it to -1. Writing 1 into the snapshot would
swap the snapshot buffer with the main buffer, so now the main buffer is
"disabled", and nothing can write to the ring buffer anymore.
Instead of creating new per_cpu buffers and losing the state of the old
buffers, basically do what the resize does and just allocate new subbuf
pages into the new_pages link list of the per_cpu buffer and if they all
succeed, then replace the old sub buffers with the new ones. This keeps
the per_cpu buffer descriptor in tact and by doing so, keeps its state.
Link: https://lore.kernel.org/linux-trace-kernel/20231219185630.944104939@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Fixes: f9b94daa54 ("ring-buffer: Set new size of the ring buffer sub page")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function ring_buffer_subbuf_order_set() just updated the sub-buffers
to the new size, but this also changes the size of the buffer in doing so.
As the size is determined by nr_pages * subbuf_size. If the subbuf_size is
increased without decreasing the nr_pages, this causes the total size of
the buffer to increase.
This broke the latency tracers as the snapshot needs to be the same size
as the main buffer. The size of the snapshot buffer is only expanded when
needed, and because the order is still the same, the size becomes out of
sync with the main buffer, as the main buffer increased in size without
the tracing system knowing.
Calculate the nr_pages to allocate with the new subbuf_size to be
buffer_size / new_subbuf_size.
Link: https://lore.kernel.org/linux-trace-kernel/20231219185630.649397785@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Fixes: f9b94daa54 ("ring-buffer: Set new size of the ring buffer sub page")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Because the main buffer and the snapshot buffer need to be the same for
some tracers, otherwise it will fail and disable all tracing, the tracers
need to be stopped while updating the sub buffer sizes so that the tracers
see the main and snapshot buffers with the same sub buffer size.
Link: https://lore.kernel.org/linux-trace-kernel/20231219185630.353222794@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Fixes: 2808e31ec1 ("ring-buffer: Add interface for configuring trace sub buffer size")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When updating the order of the sub buffers for the main buffer, make sure
that if the snapshot buffer exists, that it gets its order updated as
well.
Link: https://lore.kernel.org/linux-trace-kernel/20231219185630.054668186@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that the ring buffer specifies the size of its sub buffers, they all
need to be the same size. When doing a read, a swap is done with a spare
page. Make sure they are the same size before doing the swap, otherwise
the read will fail.
Link: https://lore.kernel.org/linux-trace-kernel/20231219185629.763664788@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
As all the subbuffer order (subbuffer sizes) must be the same throughout
the ring buffer, check the order of the buffers that are doing a CPU
buffer swap in ring_buffer_swap_cpu() to make sure they are the same.
If the are not the same, then fail to do the swap, otherwise the ring
buffer will think the CPU buffer has a specific subbuffer size when it
does not.
Link: https://lore.kernel.org/linux-trace-kernel/20231219185629.467894710@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
On failure to allocate ring buffer pages, the pointer to the CPU buffer
pages is freed, but the pages that were allocated previously were not.
Make sure they are freed too.
Link: https://lore.kernel.org/linux-trace-kernel/20231219185629.179352802@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Fixes: f9b94daa54 ("tracing: Set new size of the ring buffer sub page")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The synth_event_gen_test module can be built in, if someone wants to run
the tests at boot up and not have to load them.
The synth_event_gen_test_init() function creates and enables the synthetic
events and runs its tests.
The synth_event_gen_test_exit() disables the events it created and
destroys the events.
If the module is builtin, the events are never disabled. The issue is, the
events should be disable after the tests are run. This could be an issue
if the rest of the boot up tests are enabled, as they expect the events to
be in a known state before testing. That known state happens to be
disabled.
When CONFIG_SYNTH_EVENT_GEN_TEST=y and CONFIG_EVENT_TRACE_STARTUP_TEST=y
a warning will trigger:
Running tests on trace events:
Testing event create_synth_test:
Enabled event during self test!
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1 at kernel/trace/trace_events.c:4150 event_trace_self_tests+0x1c2/0x480
Modules linked in:
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-test-00031-gb803d7c664d5-dirty #276
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:event_trace_self_tests+0x1c2/0x480
Code: bb e8 a2 ab 5d fc 48 8d 7b 48 e8 f9 3d 99 fc 48 8b 73 48 40 f6 c6 01 0f 84 d6 fe ff ff 48 c7 c7 20 b6 ad bb e8 7f ab 5d fc 90 <0f> 0b 90 48 89 df e8 d3 3d 99 fc 48 8b 1b 4c 39 f3 0f 85 2c ff ff
RSP: 0000:ffffc9000001fdc0 EFLAGS: 00010246
RAX: 0000000000000029 RBX: ffff88810399ca80 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffffb9f19478 RDI: ffff88823c734e64
RBP: ffff88810399f300 R08: 0000000000000000 R09: fffffbfff79eb32a
R10: ffffffffbcf59957 R11: 0000000000000001 R12: ffff888104068090
R13: ffffffffbc89f0a0 R14: ffffffffbc8a0f08 R15: 0000000000000078
FS: 0000000000000000(0000) GS:ffff88823c700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000001f6282001 CR4: 0000000000170ef0
Call Trace:
<TASK>
? __warn+0xa5/0x200
? event_trace_self_tests+0x1c2/0x480
? report_bug+0x1f6/0x220
? handle_bug+0x6f/0x90
? exc_invalid_op+0x17/0x50
? asm_exc_invalid_op+0x1a/0x20
? tracer_preempt_on+0x78/0x1c0
? event_trace_self_tests+0x1c2/0x480
? __pfx_event_trace_self_tests_init+0x10/0x10
event_trace_self_tests_init+0x27/0xe0
do_one_initcall+0xd6/0x3c0
? __pfx_do_one_initcall+0x10/0x10
? kasan_set_track+0x25/0x30
? rcu_is_watching+0x38/0x60
kernel_init_freeable+0x324/0x450
? __pfx_kernel_init+0x10/0x10
kernel_init+0x1f/0x1e0
? _raw_spin_unlock_irq+0x33/0x50
ret_from_fork+0x34/0x60
? __pfx_kernel_init+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
This is because the synth_event_gen_test_init() left the synthetic events
that it created enabled. By having it disable them after testing, the
other selftests will run fine.
Link: https://lore.kernel.org/linux-trace-kernel/20231220111525.2f0f49b0@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 9fe41efaca ("tracing: Add synth event generation test module")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Alexander Graf <graf@amazon.com>
Tested-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
For a clean, conflict-free revert of the token-related patches in commit
d17aff807f ("Revert BPF token-related functionality"), the bpf fs commit
750e785796 ("bpf: Support uid and gid when mounting bpffs") was undone
temporarily as well.
This patch manually re-adds the functionality from the original one back
in 750e785796, no other functional changes intended.
Testing:
# mount -t bpf -o uid=65534,gid=65534 bpffs ./foo
# ls -la . | grep foo
drwxrwxrwt 2 nobody nogroup 0 Dec 20 13:16 foo
# mount -t bpf
bpffs on /root/foo type bpf (rw,relatime,uid=65534,gid=65534)
Also, passing invalid arguments for uid/gid are properly rejected as expected.
Fixes: d17aff807f ("Revert BPF token-related functionality")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Cc: Jie Jiang <jiejiang@chromium.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/bpf/20231220133805.20953-1-daniel@iogearbox.net
Bring in the changes to the file infrastructure for this cycle. Mostly
cleanups and some performance tweaks.
* file: remove __receive_fd()
* file: stop exposing receive_fd_user()
* fs: replace f_rcuhead with f_task_work
* file: remove pointless wrapper
* file: s/close_fd_get_file()/file_close_fd()/g
* Improve __fget_files_rcu() code generation (and thus __fget_light())
* file: massage cleanup of files that failed to open
Signed-off-by: Christian Brauner <brauner@kernel.org>
When compiling with gcc version 14.0.0 20231220 (experimental)
and W=1, I've noticed the following warning:
kernel/watch_queue.c: In function 'watch_queue_set_size':
kernel/watch_queue.c:273:32: warning: 'kcalloc' sizes specified with 'sizeof'
in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
273 | pages = kcalloc(sizeof(struct page *), nr_pages, GFP_KERNEL);
| ^~~~~~
Since 'n' and 'size' arguments of 'kcalloc()' are multiplied to
calculate the final size, their actual order doesn't affect the
result and so this is not a bug. But it's still worth to fix it.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231221090139.12579-1-dmantipov@yandex.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
Only the posix timer system calls use this (when the posix timer support
is disabled, which does not actually happen in any normal case), because
they had debug code to print out a warning about missing system calls.
Get rid of that special case, and just use the standard COND_SYSCALL
interface that creates weak system call stubs that return -ENOSYS for
when the system call does not exist.
This fixes a kCFI issue with the SYS_NI() hackery:
CFI failure at int80_emulation+0x67/0xb0 (target: sys_ni_posix_timers+0x0/0x70; expected type: 0xb02b34d9)
WARNING: CPU: 0 PID: 48 at int80_emulation+0x67/0xb0
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's really no overlap between uapi/linux/wait.h and linux/wait.h.
There are two files which rely on the uapi file being implcitly included,
so explicitly include it there and remove it from the main header file.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reviewed-by: Christian Brauner <brauner@kernel.org>
This is needed for killing the sched.h dependency on rcupdate.h, and
pid.h is a better place for this code anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Moving these stub functions to a .c file means we can kill a sched.h
dependency on printk.h.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Remove second include of linux/kexec.h
Link: https://lkml.kernel.org/r/202312151654+0800-wangjinchao@xfusion.com
Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use ALIGN macro instead of open-coding it to improve code readability.
Link: https://lkml.kernel.org/r/20231212142706.25149-1-ytcoode@gmail.com
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
TASK_KILLABLE already includes TASK_UNINTERRUPTIBLE, so there is no
need to add a separate TASK_UNINTERRUPTIBLE.
Link: https://lkml.kernel.org/r/20231208084115.1973285-1-haokexin@gmail.com
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Then when specifying '-d' for kexec_file_load interface, loaded locations
of kernel/initrd/cmdline etc can be printed out to help debug.
Here replace pr_debug() with the newly added kexec_dprintk() in kexec_file
loading related codes.
And also print out type/start/head of kimage and flags to help debug.
Link: https://lkml.kernel.org/r/20231213055747.61826-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kexec_file: print out debugging message if required", v4.
Currently, specifying '-d' on kexec command will print a lot of debugging
informationabout kexec/kdump loading with kexec_load interface.
However, kexec_file_load prints nothing even though '-d' is specified.
It's very inconvenient to debug or analyze the kexec/kdump loading when
something wrong happened with kexec/kdump itself or develper want to check
the kexec/kdump loading.
In this patchset, a kexec_file flag is KEXEC_FILE_DEBUG added and checked
in code. If it's passed in, debugging message of kexec_file code will be
printed out and can be seen from console and dmesg. Otherwise, the
debugging message is printed like beofre when pr_debug() is taken.
Note:
****
=====
1) The code in kexec-tools utility also need be changed to support
passing KEXEC_FILE_DEBUG to kernel when 'kexec -s -d' is specified.
The patch link is here:
=========
[PATCH] kexec_file: add kexec_file flag to support debug printing
http://lists.infradead.org/pipermail/kexec/2023-November/028505.html
2) s390 also has kexec_file code, while I am not sure what debugging
information is necessary. So leave it to s390 developer.
Test:
****
====
Testing was done in v1 on x86_64 and arm64. For v4, tested on x86_64
again. And on x86_64, the printed messages look like below:
--------------------------------------------------------------
kexec measurement buffer for the loaded kernel at 0x207fffe000.
Loaded purgatory at 0x207fff9000
Loaded boot_param, command line and misc at 0x207fff3000 bufsz=0x1180 memsz=0x1180
Loaded 64bit kernel at 0x207c000000 bufsz=0xc88200 memsz=0x3c4a000
Loaded initrd at 0x2079e79000 bufsz=0x2186280 memsz=0x2186280
Final command line is: root=/dev/mapper/fedora_intel--knightslanding--lb--02-root ro
rd.lvm.lv=fedora_intel-knightslanding-lb-02/root console=ttyS0,115200N81 crashkernel=256M
E820 memmap:
0000000000000000-000000000009a3ff (1)
000000000009a400-000000000009ffff (2)
00000000000e0000-00000000000fffff (2)
0000000000100000-000000006ff83fff (1)
000000006ff84000-000000007ac50fff (2)
......
000000207fff6150-000000207fff615f (128)
000000207fff6160-000000207fff714f (1)
000000207fff7150-000000207fff715f (128)
000000207fff7160-000000207fff814f (1)
000000207fff8150-000000207fff815f (128)
000000207fff8160-000000207fffffff (1)
nr_segments = 5
segment[0]: buf=0x000000004e5ece74 bufsz=0x211 mem=0x207fffe000 memsz=0x1000
segment[1]: buf=0x000000009e871498 bufsz=0x4000 mem=0x207fff9000 memsz=0x5000
segment[2]: buf=0x00000000d879f1fe bufsz=0x1180 mem=0x207fff3000 memsz=0x2000
segment[3]: buf=0x000000001101cd86 bufsz=0xc88200 mem=0x207c000000 memsz=0x3c4a000
segment[4]: buf=0x00000000c6e38ac7 bufsz=0x2186280 mem=0x2079e79000 memsz=0x2187000
kexec_file_load: type:0, start:0x207fff91a0 head:0x109e004002 flags:0x8
---------------------------------------------------------------------------
This patch (of 7):
When specifying 'kexec -c -d', kexec_load interface will print loading
information, e.g the regions where kernel/initrd/purgatory/cmdline are
put, the memmap passed to 2nd kernel taken as system RAM ranges, and
printing all contents of struct kexec_segment, etc. These are very
helpful for analyzing or positioning what's happening when kexec/kdump
itself failed. The debugging printing for kexec_load interface is made in
user space utility kexec-tools.
Whereas, with kexec_file_load interface, 'kexec -s -d' print nothing.
Because kexec_file code is mostly implemented in kernel space, and the
debugging printing functionality is missed. It's not convenient when
debugging kexec/kdump loading and jumping with kexec_file_load interface.
Now add KEXEC_FILE_DEBUG to kexec_file flag to control the debugging
message printing. And add global variable kexec_file_dbg_print and macro
kexec_dprintk() to facilitate the printing.
This is a preparation, later kexec_dprintk() will be used to replace the
existing pr_debug(). Once 'kexec -s -d' is specified, it will print out
kexec/kdump loading information. If '-d' is not specified, it regresses
to pr_debug().
Link: https://lkml.kernel.org/r/20231213055747.61826-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20231213055747.61826-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All other users of crypto code use 'select' instead of 'depends on', so do
the same thing with KEXEC_FILE for consistency.
In practice this makes very little difference as kernels with kexec
support are very likely to also include some other feature that already
selects both crypto and crypto_sha256, but being consistent here helps for
usability as well as to avoid potential circular dependencies.
This reverts the dependency back to what it was originally before commit
74ca317c26 ("kexec: create a new config option CONFIG_KEXEC_FILE for
new syscall"), which changed changed it with the comment "This should be
safer as "select" is not recursive", but that appears to have been done in
error, as "select" is indeed recursive, and there are no other
dependencies that prevent CRYPTO_SHA256 from being selected here.
Link: https://lkml.kernel.org/r/20231023110308.1202042-2-arnd@kernel.org
Fixes: 74ca317c26 ("kexec: create a new config option CONFIG_KEXEC_FILE for new syscall")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The cleanup for the CONFIG_KEXEC Kconfig logic accidentally changed the
'depends on CRYPTO=y' dependency to a plain 'depends on CRYPTO', which
causes a link failure when all the crypto support is in a loadable module
and kexec_file support is built-in:
x86_64-linux-ld: vmlinux.o: in function `__x64_sys_kexec_file_load':
(.text+0x32e30a): undefined reference to `crypto_alloc_shash'
x86_64-linux-ld: (.text+0x32e58e): undefined reference to `crypto_shash_update'
x86_64-linux-ld: (.text+0x32e6ee): undefined reference to `crypto_shash_final'
Both s390 and x86 have this problem, while ppc64 and riscv have the
correct dependency already. On riscv, the dependency is only used for the
purgatory, not for the kexec_file code itself, which may be a bit
surprising as it means that with CONFIG_CRYPTO=m, it is possible to enable
KEXEC_FILE but then the purgatory code is silently left out.
Move this into the common Kconfig.kexec file in a way that is correct
everywhere, using the dependency on CRYPTO_SHA256=y only when the
purgatory code is available. This requires reversing the dependency
between ARCH_SUPPORTS_KEXEC_PURGATORY and KEXEC_FILE, but the effect
remains the same, other than making riscv behave like the other ones.
On s390, there is an additional dependency on CRYPTO_SHA256_S390, which
should technically not be required but gives better performance. Remove
this dependency here, noting that it was not present in the initial
Kconfig code but was brought in without an explanation in commit
71406883fd ("s390/kexec_file: Add kexec_file_load system call").
[arnd@arndb.de: fix riscv build]
Link: https://lkml.kernel.org/r/67ddd260-d424-4229-a815-e3fcfb864a77@app.fastmail.com
Link: https://lkml.kernel.org/r/20231023110308.1202042-1-arnd@kernel.org
Fixes: 6af5138083 ("x86/kexec: refactor for kernel/Kconfig.kexec")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
At present, bpf memory allocator uses check_obj_size() to ensure that
ksize() of allocated pointer is equal with the unit_size of used
bpf_mem_cache. Its purpose is to prevent bpf_mem_free() from selecting
a bpf_mem_cache which has different unit_size compared with the
bpf_mem_cache used for allocation. But as reported by lkp, the return
value of ksize() or kmalloc_size_roundup() may change due to slab merge
and it will lead to the warning report in check_obj_size().
The reported warning happened as follows:
(1) in bpf_mem_cache_adjust_size(), kmalloc_size_roundup(96) returns the
object_size of kmalloc-96 instead of kmalloc-cg-96. The object_size of
kmalloc-96 is 96, so size_index for 96 is not adjusted accordingly.
(2) the object_size of kmalloc-cg-96 is adjust from 96 to 128 due to
slab merge in __kmem_cache_alias(). For SLAB, SLAB_HWCACHE_ALIGN is
enabled by default for kmalloc slab, so align is 64 and size is 128 for
kmalloc-cg-96. SLUB has a similar merge logic, but its object_size will
not be changed, because its align is 8 under x86-64.
(3) when unit_alloc() does kmalloc_node(96, __GFP_ACCOUNT, node),
ksize() returns 128 instead of 96 for the returned pointer.
(4) the warning in check_obj_size() is triggered.
Considering the slab merge can happen in anytime (e.g, a slab created in
a new module), the following case is also possible: during the
initialization of bpf_global_ma, there is no slab merge and ksize() for
a 96-bytes object returns 96. But after that a new slab created by a
kernel module is merged to kmalloc-cg-96 and the object_size of
kmalloc-cg-96 is adjust from 96 to 128 (which is possible for x86-64 +
CONFIG_SLAB, because its alignment requirement is 64 for 96-bytes slab).
So soon or later, when bpf_global_ma frees a 96-byte-sized pointer
which is allocated from bpf_mem_cache with unit_size=96, bpf_mem_free()
will free the pointer through a bpf_mem_cache in which unit_size is 128,
because the return value of ksize() changes. The warning for the
mismatch will be triggered again.
A feasible fix is introducing similar APIs compared with ksize() and
kmalloc_size_roundup() to return the actually-allocated size instead of
size which may change due to slab merge, but it will introduce
unnecessary dependency on the implementation details of mm subsystem.
As for now the pointer of bpf_mem_cache is saved in the 8-bytes area
(or 4-bytes under 32-bit host) above the returned pointer, using
unit_size in the saved bpf_mem_cache to select the target cache instead
of inferring the size from the pointer itself. Beside no extra
dependency on mm subsystem, the performance for bpf_mem_free_rcu() is
also improved as shown below.
Before applying the patch, the performances of bpf_mem_alloc() and
bpf_mem_free_rcu() on 8-CPUs VM with one producer are as follows:
kmalloc : alloc 11.69 ± 0.28M/s free 29.58 ± 0.93M/s
percpu : alloc 14.11 ± 0.52M/s free 14.29 ± 0.99M/s
After apply the patch, the performance for bpf_mem_free_rcu() increases
9% and 146% for kmalloc memory and per-cpu memory respectively:
kmalloc: alloc 11.01 ± 0.03M/s free 32.42 ± 0.48M/s
percpu: alloc 12.84 ± 0.12M/s free 35.24 ± 0.23M/s
After the fixes, there is no need to adjust size_index to fix the
mismatch between allocation and free, so remove it as well. Also return
NULL instead of ZERO_SIZE_PTR for zero-sized alloc in bpf_mem_alloc(),
because there is no bpf_mem_cache pointer saved above ZERO_SIZE_PTR.
Fixes: 9077fc228f ("bpf: Use kmalloc_size_roundup() to adjust size_index")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/bpf/202310302113.9f8fe705-oliver.sang@intel.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231216131052.27621-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Function swsusp_close() does not have any parameters, so remove the
description of parameter @exclusive to prevent this warning.
swap.c:1573: warning: Excess function parameter 'exclusive' description in 'swsusp_close'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
