Commit Graph

29 Commits

Author SHA1 Message Date
Zeng Tao
f3c1948182 cpu-topology: Don't error on more than CONFIG_NR_CPUS CPUs in device tree
When the kernel is configured with CONFIG_NR_CPUS smaller than the
number of CPU nodes in the device tree(DT), all the CPU nodes parsing
done to fetch topology information will fail. This is not reasonable
as it is legal to have all the physical CPUs in the system in the DT.

Let us just skip such CPU DT nodes that are not used in the kernel
rather than returning an error.

Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Link: https://lore.kernel.org/r/1579225973-32423-1-git-send-email-prime.zeng@hisilicon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17 15:21:49 +01:00
Linus Torvalds
77dcfe2b9e Power management updates for 5.4-rc1
- Rework the main suspend-to-idle control flow to avoid repeating
    "noirq" device resume and suspend operations in case of spurious
    wakeups from the ACPI EC and decouple the ACPI EC wakeups support
    from the LPS0 _DSM support (Rafael Wysocki).
 
  - Extend the wakeup sources framework to expose wakeup sources as
    device objects in sysfs (Tri Vo, Stephen Boyd).
 
  - Expose system suspend statistics in sysfs (Kalesh Singh).
 
  - Introduce a new haltpoll cpuidle driver and a new matching
    governor for virtualized guests wanting to do guest-side polling
    in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li,
    Stephen Rothwell).
 
  - Fix the menu and teo cpuidle governors to allow the scheduler tick
    to be stopped if PM QoS is used to limit the CPU idle state exit
    latency in some cases (Rafael Wysocki).
 
  - Increase the resolution of the play_idle() argument to microseconds
    for more fine-grained injection of CPU idle cycles (Daniel Lezcano).
 
  - Switch over some users of cpuidle notifiers to the new QoS-based
    frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
    policy notifier events (Viresh Kumar).
 
  - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).
 
  - Add support for MT8183 and MT8516 to the mediatek cpufreq driver
    (Andrew-sh.Cheng, Fabien Parent).
 
  - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
    Huang).
 
  - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).
 
  - Update the qcom cpufreq driver (among other things, to make it
    easier to extend and to use kryo cpufreq for other nvmem-based
    SoCs) and add qcs404 support to it  (Niklas Cassel, Douglas
    RAILLARD, Sibi Sankar, Sricharan R).
 
  - Fix assorted issues and make assorted minor improvements in the
    cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
    Gustavo Silva, Hariprasad Kelam).
 
  - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
    Bergmann).
 
  - Add new Exynos PPMU events to devfreq events and extend that
    mechanism (Lukasz Luba).
 
  - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).
 
  - Improve devfreq documentation and governor code, fix spelling
    typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard
    Crestez, MyungJoo Ham, Gaël PORTAY).
 
  - Add regulators enable and disable to the OPP (operating performance
    points) framework (Kamil Konieczny).
 
  - Update the OPP framework to support multiple opp-suspend properties
    (Anson Huang).
 
  - Fix assorted issues and make assorted minor improvements in the OPP
    code (Niklas Cassel, Viresh Kumar, Yue Hu).
 
  - Clean up the generic power domains (genpd) framework (Ulf Hansson).
 
  - Clean up assorted pieces of power management code and documentation
    (Akinobu Mita, Amit Kucheria, Chuhong Yuan).
 
  - Update the pm-graph tool to version 5.5 including multiple fixes
    and improvements (Todd Brandt).
 
  - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
    Sébastien Szymanski).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl2ArZ4SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxgfYQAK80hs43vWQDmp7XKrN4pQe8+qYULAGO
 fBfrFl+NG9y/cnuqnt3NtA8MoyNsMMkMLkpkEDMfSbYqqH5ehEzX5+uGJWiWx8+Y
 oH5KU8MH7Tj/utYaalGzDt0AHfHZDIGC0NCUNQJVtE/4mOANFabwsCwscp4MrD5Q
 WjFN8U4BrsmWgJdZ/U9QIWcDZ0I+1etCF+rZG2yxSv31FMq2Zk/Qm4YyobqCvQFl
 TR9rxl08wqUmIYIz5cDjt/3AKH7NLLDqOTstbCL7cmufM5XPFc1yox69xc89UrIa
 4AMgmDp7SMwFG/gdUPof0WQNmx7qxmiRAPleAOYBOZW/8jPNZk2y+RhM5NeF72m7
 AFqYiuxqatkSb4IsT8fLzH9IUZOdYr8uSmoMQECw+MHdApaKFjFV8Lb/qx5+AwkD
 y7pwys8dZSamAjAf62eUzJDWcEwkNrujIisGrIXrVHb7ISbweskMOmdAYn9p4KgP
 dfRzpJBJ45IaMIdbaVXNpg3rP7Apfs7X1X+/ZhG6f+zHH3zYwr8Y81WPqX8WaZJ4
 qoVCyxiVWzMYjY2/1lzjaAdqWojPWHQ3or3eBaK52DouyG3jY6hCDTLwU7iuqcCX
 jzAtrnqrNIKufvaObEmqcmYlIIOFT7QaJCtGUSRFQLfSon8fsVSR7LLeXoAMUJKT
 JWQenuNaJngK
 =TBDQ
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These include a rework of the main suspend-to-idle code flow (related
  to the handling of spurious wakeups), a switch over of several users
  of cpufreq notifiers to QoS-based limits, a new devfreq driver for
  Tegra20, a new cpuidle driver and governor for virtualized guests, an
  extension of the wakeup sources framework to expose wakeup sources as
  device objects in sysfs, and more.

  Specifics:

   - Rework the main suspend-to-idle control flow to avoid repeating
     "noirq" device resume and suspend operations in case of spurious
     wakeups from the ACPI EC and decouple the ACPI EC wakeups support
     from the LPS0 _DSM support (Rafael Wysocki).

   - Extend the wakeup sources framework to expose wakeup sources as
     device objects in sysfs (Tri Vo, Stephen Boyd).

   - Expose system suspend statistics in sysfs (Kalesh Singh).

   - Introduce a new haltpoll cpuidle driver and a new matching governor
     for virtualized guests wanting to do guest-side polling in the idle
     loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell).

   - Fix the menu and teo cpuidle governors to allow the scheduler tick
     to be stopped if PM QoS is used to limit the CPU idle state exit
     latency in some cases (Rafael Wysocki).

   - Increase the resolution of the play_idle() argument to microseconds
     for more fine-grained injection of CPU idle cycles (Daniel
     Lezcano).

   - Switch over some users of cpuidle notifiers to the new QoS-based
     frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
     policy notifier events (Viresh Kumar).

   - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).

   - Add support for MT8183 and MT8516 to the mediatek cpufreq driver
     (Andrew-sh.Cheng, Fabien Parent).

   - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
     Huang).

   - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).

   - Update the qcom cpufreq driver (among other things, to make it
     easier to extend and to use kryo cpufreq for other nvmem-based
     SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
     RAILLARD, Sibi Sankar, Sricharan R).

   - Fix assorted issues and make assorted minor improvements in the
     cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
     Gustavo Silva, Hariprasad Kelam).

   - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
     Bergmann).

   - Add new Exynos PPMU events to devfreq events and extend that
     mechanism (Lukasz Luba).

   - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).

   - Improve devfreq documentation and governor code, fix spelling typos
     in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez,
     MyungJoo Ham, Gaël PORTAY).

   - Add regulators enable and disable to the OPP (operating performance
     points) framework (Kamil Konieczny).

   - Update the OPP framework to support multiple opp-suspend properties
     (Anson Huang).

   - Fix assorted issues and make assorted minor improvements in the OPP
     code (Niklas Cassel, Viresh Kumar, Yue Hu).

   - Clean up the generic power domains (genpd) framework (Ulf Hansson).

   - Clean up assorted pieces of power management code and documentation
     (Akinobu Mita, Amit Kucheria, Chuhong Yuan).

   - Update the pm-graph tool to version 5.5 including multiple fixes
     and improvements (Todd Brandt).

   - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
     Sébastien Szymanski)"

* tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits)
  cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available
  cpuidle-haltpoll: do not set an owner to allow modunload
  cpuidle-haltpoll: return -ENODEV on modinit failure
  cpuidle-haltpoll: set haltpoll as preferred governor
  cpuidle: allow governor switch on cpuidle_register_driver()
  PM: runtime: Documentation: add runtime_status ABI document
  pm-graph: make setVal unbuffered again for python2 and python3
  powercap: idle_inject: Use higher resolution for idle injection
  cpuidle: play_idle: Increase the resolution to usec
  cpuidle-haltpoll: vcpu hotplug support
  cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
  cpufreq: qcom: Add support for qcs404 on nvmem driver
  cpufreq: qcom: Refactor the driver to make it easier to extend
  cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
  dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
  Documentation: cpufreq: Update policy notifier documentation
  cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
  PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
  PM / Domains: Simplify genpd_lookup_dev()
  ...
2019-09-17 19:15:14 -07:00
Viresh Kumar
40f0fc2a41 arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY
CPUFREQ_NOTIFY is going to get removed soon, lets use
CPUFREQ_CREATE_POLICY instead of that here. CPUFREQ_CREATE_POLICY is
called only once (which is exactly what we want here) for each cpufreq
policy when it is first created.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-26 10:02:02 +02:00
Atish Patra
ca74b316df arm: Use common cpu_topology structure and functions.
Currently, ARM32 and ARM64 uses different data structures to represent
their cpu topologies. Since, we are moving the ARM64 topology to common
code to be used by other architectures, we can reuse that for ARM32 as
well.

Take this opprtunity to remove the redundant functions from ARM32 and
reuse the common code instead.

To: Russell King <linux@armlinux.org.uk>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com> (on TC2)
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-07-22 09:36:18 -07:00
Atish Patra
60c1b220d8 cpu-topology: Move cpu topology code to common code.
Both RISC-V & ARM64 are using cpu-map device tree to describe
their cpu topology. It's better to move the relevant code to
a common place instead of duplicate code.

To: Will Deacon <will.deacon@arm.com>
To: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
[Tested on QDF2400]
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
[Tested on Juno and other embedded platforms.]
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-07-22 09:36:06 -07:00
Linus Torvalds
f632a8170a Driver Core and debugfs changes for 5.3-rc1
Here is the "big" driver core and debugfs changes for 5.3-rc1
 
 It's a lot of different patches, all across the tree due to some api
 changes and lots of debugfs cleanups.  Because of this, there is going
 to be some merge issues with your tree at the moment, I'll follow up
 with the expected resolutions to make it easier for you.
 
 Other than the debugfs cleanups, in this set of changes we have:
 	- bus iteration function cleanups (will cause build warnings
 	  with s390 and coresight drivers in your tree)
 	- scripts/get_abi.pl tool to display and parse Documentation/ABI
 	  entries in a simple way
 	- cleanups to Documenatation/ABI/ entries to make them parse
 	  easier due to typos and other minor things
 	- default_attrs use for some ktype users
 	- driver model documentation file conversions to .rst
 	- compressed firmware file loading
 	- deferred probe fixes
 
 All of these have been in linux-next for a while, with a bunch of merge
 issues that Stephen has been patient with me for.  Other than the merge
 issues, functionality is working properly in linux-next :)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
 LpRyb3zX29oChFaZkc5a
 =XrEZ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and debugfs updates from Greg KH:
 "Here is the "big" driver core and debugfs changes for 5.3-rc1

  It's a lot of different patches, all across the tree due to some api
  changes and lots of debugfs cleanups.

  Other than the debugfs cleanups, in this set of changes we have:

   - bus iteration function cleanups

   - scripts/get_abi.pl tool to display and parse Documentation/ABI
     entries in a simple way

   - cleanups to Documenatation/ABI/ entries to make them parse easier
     due to typos and other minor things

   - default_attrs use for some ktype users

   - driver model documentation file conversions to .rst

   - compressed firmware file loading

   - deferred probe fixes

  All of these have been in linux-next for a while, with a bunch of
  merge issues that Stephen has been patient with me for"

* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
  debugfs: make error message a bit more verbose
  orangefs: fix build warning from debugfs cleanup patch
  ubifs: fix build warning after debugfs cleanup patch
  driver: core: Allow subsystems to continue deferring probe
  drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
  arch_topology: Remove error messages on out-of-memory conditions
  lib: notifier-error-inject: no need to check return value of debugfs_create functions
  swiotlb: no need to check return value of debugfs_create functions
  ceph: no need to check return value of debugfs_create functions
  sunrpc: no need to check return value of debugfs_create functions
  ubifs: no need to check return value of debugfs_create functions
  orangefs: no need to check return value of debugfs_create functions
  nfsd: no need to check return value of debugfs_create functions
  lib: 842: no need to check return value of debugfs_create functions
  debugfs: provide pr_fmt() macro
  debugfs: log errors when something goes wrong
  drivers: s390/cio: Fix compilation warning about const qualifiers
  drivers: Add generic helper to match by of_node
  driver_find_device: Unify the match function with class_find_device()
  bus_find_device: Unify the match callback with class_find_device
  ...
2019-07-12 12:24:03 -07:00
Geert Uytterhoeven
0fd33116c1 arch_topology: Remove error messages on out-of-memory conditions
There is no need to print error messages if kcalloc() or
alloc_cpumask_var() fail, as the memory allocation core already takes
care of that.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20190527122703.6303-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03 20:10:18 +02:00
Vincent Guittot
8ec59c0f5f sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity()
The 'struct sched_domain *sd' parameter to arch_scale_cpu_capacity() is
unused since commit:

  765d0af19f ("sched/topology: Remove the ::smt_gain field from 'struct sched_domain'")

Remove it.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: gregkh@linuxfoundation.org
Cc: linux@armlinux.org.uk
Cc: quentin.perret@arm.com
Cc: rafael@kernel.org
Link: https://lkml.kernel.org/r/1560783617-5827-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24 19:23:39 +02:00
Lingutla Chandrasekhar
5d777b185f arch_topology: Make cpu_capacity sysfs node as read-only
If user updates any cpu's cpu_capacity, then the new value is going to
be applied to all its online sibling cpus. But this need not to be correct
always, as sibling cpus (in ARM, same micro architecture cpus) would have
different cpu_capacity with different performance characteristics.
So, updating the user supplied cpu_capacity to all cpu siblings
is not correct.

And another problem is, current code assumes that 'all cpus in a cluster
or with same package_id (core_siblings), would have same cpu_capacity'.
But with commit '5bdd2b3f0f8 ("arm64: topology: add support to remove
cpu topology sibling masks")', when a cpu hotplugged out, the cpu
information gets cleared in its sibling cpus. So, user supplied
cpu_capacity would be applied to only online sibling cpus at the time.
After that, if any cpu hotplugged in, it would have different cpu_capacity
than its siblings, which breaks the above assumption.

So, instead of mucking around the core sibling mask for user supplied
value, use device-tree to set cpu capacity. And make the cpu_capacity
node as read-only to know the asymmetry between cpus in the system.
While at it, remove cpu_scale_mutex usage, which used for sysfs write
protection.

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Quentin Perret <quentin.perret@arm.com>
Reviewed-by: Quentin Perret <quentin.perret@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 18:41:21 +02:00
Morten Rasmussen
bb1fbdd3c3 sched/topology, drivers/base/arch_topology: Rebuild the sched_domain hierarchy when capacities change
The setting of SD_ASYM_CPUCAPACITY depends on the per-CPU capacities.
These might not have their final values when the hierarchy is initially
built as the values depend on cpufreq to be initialized or the values
being set through sysfs. To ensure that the flags are set correctly we
need to rebuild the sched_domain hierarchy whenever the reported per-CPU
capacity (arch_scale_cpu_capacity()) changes.

This patch ensure that a full sched_domain rebuild happens when CPU
capacity changes occur.

Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1532093554-30504-3-git-send-email-morten.rasmussen@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-10 11:05:47 +02:00
Gaku Inami
9de9a44948 Revert "base: arch_topology: fix section mismatch build warnings"
This reverts commit 452562abb5 ("base: arch_topology: fix section
mismatch build warnings"). It causes the notifier call hangs in some
use-cases.

In some cases with using maxcpus, some of cpus are booted first and
then the remaining cpus are booted. As an example, some users who want
to realize fast boot up often use the following procedure.

  1) Define all CPUs on device tree (CA57x4 + CA53x4)
  2) Add "maxcpus=4" in bootargs
  3) Kernel boot up with CA57x4
  4) After kernel boot up, CA53x4 is booted from user

When kernel init was finished, CPUFREQ_POLICY_NOTIFIER was not still
unregisterd. This means that "__init init_cpu_capacity_callback()"
will be called after kernel init sequence. To avoid this problem,
it needs to remove __init{,data} annotations by reverting this commit.

Also, this commit was needed to fix kernel compile issue below.
However, this issue was also fixed by another patch: commit 82d8ba717c
("arch_topology: Fix section miss match warning due to
free_raw_capacity()") in v4.15 as well.
Whereas commit 452562abb5 added all the missing __init annotations,
commit 82d8ba717c removed it from free_raw_capacity().

WARNING: vmlinux.o(.text+0x548f24): Section mismatch in reference
from the function init_cpu_capacity_callback() to the variable
.init.text:$x
The function init_cpu_capacity_callback() references
the variable __init $x.
This is often because init_cpu_capacity_callback lacks a __init
annotation or the annotation of $x is wrong.

Fixes: 82d8ba717c ("arch_topology: Fix section miss match warning due to free_raw_capacity()")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Gaku Inami <gaku.inami.xh@renesas.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15 14:36:20 +01:00
Greg Kroah-Hartman
6ee97d357c drivers: core: arch_topology.c: move SPDX tag to top of the file
arch_topology.c had a SPDX tag in it, so move it to the top of the file
like the rest of the kernel files have it.

Also remove the redundant license text as it is not needed if the SPDX
tag is in the file, as the tag identifies the license in a specific and
legally-defined manner.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.  And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-07 18:36:43 +01:00
Linus Torvalds
b9743042b3 Driver core patches for 4.15-rc1
Here is the set of driver core / debugfs patches for 4.15-rc1.
 
 Not many here, mostly all are debugfs fixes to resolve some
 long-reported problems with files going away with references to them in
 userspace.  There's also some SPDX cleanups for the debugfs code, as
 well as a few other minor driver core changes for issues reported by
 people.
 
 All of these have been in linux-next for a week or more with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWg2NCA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymUNgCfYq434CFh+YtwITBNYdqkFYFf0ZAAn3qfhh2+
 M3rmZzwk2MKBvNQ2npvt
 =/8+Y
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the set of driver core / debugfs patches for 4.15-rc1.

  Not many here, mostly all are debugfs fixes to resolve some
  long-reported problems with files going away with references to them
  in userspace. There's also some SPDX cleanups for the debugfs code, as
  well as a few other minor driver core changes for issues reported by
  people.

  All of these have been in linux-next for a week or more with no
  reported issues"

* tag 'driver-core-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Fix device link deferred probe
  debugfs: Remove redundant license text
  debugfs: add SPDX identifiers to all debugfs files
  debugfs: defer debugfs_fsdata allocation to first usage
  debugfs: call debugfs_real_fops() only after debugfs_file_get()
  debugfs: purge obsolete SRCU based removal protection
  IB/hfi1: convert to debugfs_file_get() and -put()
  debugfs: convert to debugfs_file_get() and -put()
  debugfs: debugfs_real_fops(): drop __must_hold sparse annotation
  debugfs: implement per-file removal protection
  debugfs: add support for more elaborate ->d_fsdata
  driver core: Move device_links_purge() after bus_remove_device()
  arch_topology: Fix section miss match warning due to free_raw_capacity()
  driver-core: pr_err() strings should end with newlines
2017-11-16 08:55:30 -08:00
Rafael J. Wysocki
60af981c78 Merge branch 'pm-cpufreq'
* pm-cpufreq: (22 commits)
  cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE
  cpufreq: arm_big_little: make cpufreq_arm_bL_ops structures const
  cpufreq: arm_big_little: make function arguments and structure pointer const
  cpufreq: pxa: convert to clock API
  cpufreq: speedstep-lib: mark expected switch fall-through
  cpufreq: ti-cpufreq: add missing of_node_put()
  cpufreq: dt: Remove support for Exynos4212 SoCs
  cpufreq: imx6q: Move speed grading check to cpufreq driver
  cpufreq: ti-cpufreq: kfree opp_data when failure
  cpufreq: SPEAr: pr_err() strings should end with newlines
  cpufreq: powernow-k8: pr_err() strings should end with newlines
  cpufreq: dt-platdev: drop socionext,uniphier-ld6b from whitelist
  arm64: wire cpu-invariant accounting support up to the task scheduler
  arm64: wire frequency-invariant accounting support up to the task scheduler
  arm: wire cpu-invariant accounting support up to the task scheduler
  arm: wire frequency-invariant accounting support up to the task scheduler
  drivers base/arch_topology: allow inlining cpu-invariant accounting support
  drivers base/arch_topology: provide frequency-invariant accounting support
  cpufreq: dt: invoke frequency-invariance setter function
  cpufreq: arm_big_little: invoke frequency-invariance setter function
  ...
2017-11-13 01:34:49 +01:00
Prasad Sodagudi
82d8ba717c arch_topology: Fix section miss match warning due to free_raw_capacity()
Remove the __init annotation from free_raw_capacity() to avoid
the following warning.

The function init_cpu_capacity_callback() references the
function __init free_raw_capacity().
WARNING: vmlinux.o(.text+0x425cc0): Section mismatch in reference
from the function init_cpu_capacity_callback() to the function
.init.text:free_raw_capacity().

Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20 16:32:39 +02:00
Dietmar Eggemann
8216f588b5 drivers base/arch_topology: allow inlining cpu-invariant accounting support
Allow inlining of topology_get_cpu_scale() into the task
scheduler fast path (e.g. __update_load_avg_se()) by coding it as a
static inline function in the arch topology header file.

Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-03 02:37:54 +02:00
Dietmar Eggemann
0e27c567d1 drivers base/arch_topology: provide frequency-invariant accounting support
Implements the arch-specific (arm and arm64) frequency-invariance setter
function arch_set_freq_scale() which provides the following frequency
scaling factor:

  current_freq(cpu) << SCHED_CAPACITY_SHIFT / max_supported_freq(cpu)

One possible consumer of the frequency-invariance getter function
topology_get_freq_scale() is the Per-Entity Load Tracking (PELT)
mechanism of the task scheduler.

Allow inlining of topology_get_freq_scale() into the task scheduler
fast path (e.g. __update_load_avg_se()) by coding it as a static inline
function in the arch topology header file.

Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-03 02:37:53 +02:00
Dietmar Eggemann
5408211a8f drivers base/arch_topology: free cpumask cpus_to_visit
Free cpumask cpus_to_visit in case registering
init_cpu_capacity_notifier has failed or the parsing of the cpu
capacity-dmips-mhz property is done. The cpumask cpus_to_visit is
only used inside the notifier call init_cpu_capacity_callback.

Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Juri Lelli <juri.lelli@arm.com>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-03 02:37:52 +02:00
Sudeep Holla
452562abb5 base: arch_topology: fix section mismatch build warnings
Commit 2ef7a2953c ("arm, arm64: factorize common cpu capacity default code")
introduced init_cpu_capacity_callback and init_cpu_capacity_notifier
which are referenced from initcall and are missing __init{,data}
annotations resulting the below section mismatch build warnings.

"WARNING: vmlinux.o(.text+0xbab790): Section mismatch in reference from
the function init_cpu_capacity_callback() to the variable .init.text:$x
The function init_cpu_capacity_callback() references the variable
__init $x. This is often because init_cpu_capacity_callback lacks a
__init annotation or the annotation of $x is wrong."

This patch fixes the above build warnings by adding the required annotations.

Fixes: 2ef7a2953c ("arm, arm64: factorize common cpu capacity default code")
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18 17:05:07 +02:00
Rob Herring
6ef2541f26 base: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:47:55 +02:00
Viresh Kumar
d8bcf4db92 arch_topology: Get rid of cap_parsing_done
There is no need to check for cap_parsing_done flag anymore as
!raw_capacity flag alone is enough for us. Remove the (now) useless flag
cap_parsing_done.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Tested-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17 17:32:05 +02:00
Viresh Kumar
62de1161e2 arch_topology: Localize cap_parsing_failed to topology_parse_cpu_capacity()
cap_parsing_failed is only required in topology_parse_cpu_capacity() to
know if we have already tried to allocate raw_capacity and failed, or if
at least one of the cpu_node didn't had the required
"capacity-dmips-mhz" property.

All other users can use raw_capacity instead of cap_parsing_failed.

Make sure we set raw_capacity to NULL after we free it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Tested-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17 17:32:05 +02:00
Viresh Kumar
805df2966f arch_topology: Change return type of topology_parse_cpu_capacity() to bool
topology_parse_cpu_capacity() returns 1 on success and 0 on errors. Make
it return bool instead of int as that suits the purpose better.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Tested-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17 17:32:05 +02:00
Viresh Kumar
93a57081d2 arch_topology: Convert switch block to if block
We only need to take care of one case here (CPUFREQ_NOTIFY) and there is
no need to add an extra level of indentation to the case specific code
by using a switch block. Use an if block instead.

Also add some blank lines to make the code look better.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Tested-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17 17:32:05 +02:00
Viresh Kumar
3eeba1a28e arch_topology: Don't break lines unnecessarily
There is no need of line break at few places, avoid them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Tested-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17 17:32:05 +02:00
Juri Lelli
4ca4f26a9c arm,arm64,drivers: add a prefix to drivers arch_topology interfaces
Now that some functions that deal with arch topology information live
under drivers, there is a clash of naming that might create confusion.

Tidy things up by creating a topology namespace for interfaces used by
arch code; achieve this by prepending a 'topology_' prefix to driver
interfaces.

Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 19:10:09 +09:00
Juri Lelli
615ffd6314 arm,arm64,drivers: move externs in a new header file
Create a new header file (include/linux/arch_topology.h) and put there
declarations of interfaces used by arm, arm64 and drivers code.

Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 19:10:09 +09:00
Juri Lelli
c105aa3118 arm,arm64,drivers: reduce scope of cap_parsing_failed
Reduce the scope of cap_parsing_failed (making it static in
drivers/base/arch_topology.c) by slightly changing {arm,arm64} DT
parsing code.

For arm checking for !cap_parsing_failed before calling normalize_
cpu_capacity() is superfluous, as returning an error from parse_
cpu_capacity() (above) means cap_from _dt is set to false.

For arm64 we can simply check if raw_capacity points to something,
which is not if capacity parsing has failed.

Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 19:10:09 +09:00
Juri Lelli
2ef7a2953c arm, arm64: factorize common cpu capacity default code
arm and arm64 share lot of code relative to parsing CPU capacity
information from DT, using that information for appropriate scaling and
exposing a sysfs interface for chaging such values at runtime.

Factorize such code in a common place (driver/base/arch_topology.c) in
preparation for further additions.

Suggested-by: Will Deacon <will.deacon@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 19:10:09 +09:00