Commit Graph

11 Commits

Author SHA1 Message Date
Damien Le Moal
c96b817552 block: Remove blk_set_runtime_active()
The function blk_set_runtime_active() is called only from
blk_post_runtime_resume(), so there is no need for that function to be
exported. Open-code this function directly in blk_post_runtime_resume()
and remove it.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20231120070611.33951-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-20 10:22:40 -07:00
Christoph Hellwig
90110e04f2 blk-mq: include <linux/blk-mq.h> in block/blk-mq.h
block/blk-mq.h needs various definitions from <linux/blk-mq.h>,
include it there instead of relying on the source files to include
both.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 06:52:29 -06:00
Christoph Hellwig
bebe84ebee blk-mq: remove blk-mq-tag.h
blk-mq-tag.h is always included by blk-mq.h, and causes recursive
inclusion hell with further changes.  Just merge it into blk-mq.h
instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230413064057.707578-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-13 06:52:29 -06:00
Alan Stern
6e1fcab00a scsi: block: pm: Always set request queue runtime active in blk_post_runtime_resume()
John Garry reported a deadlock that occurs when trying to access a
runtime-suspended SATA device.  For obscure reasons, the rescan procedure
causes the link to be hard-reset, which disconnects the device.

The rescan tries to carry out a runtime resume when accessing the device.
scsi_rescan_device() holds the SCSI device lock and won't release it until
it can put commands onto the device's block queue.  This can't happen until
the queue is successfully runtime-resumed or the device is unregistered.
But the runtime resume fails because the device is disconnected, and
__scsi_remove_device() can't do the unregistration because it can't get the
device lock.

The best way to resolve this deadlock appears to be to allow the block
queue to start running again even after an unsuccessful runtime resume.
The idea is that the driver or the SCSI error handler will need to be able
to use the queue to resolve the runtime resume failure.

This patch removes the err argument to blk_post_runtime_resume() and makes
the routine act as though the resume was successful always.  This fixes the
deadlock.

Link: https://lore.kernel.org/r/1639999298-244569-4-git-send-email-chenxiang66@hisilicon.com
Fixes: e27829dc92 ("scsi: serialize ->rescan against ->remove")
Reported-and-tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22 23:38:29 -05:00
Bart Van Assche
fa4d0f1992 scsi: block: Fix a race in the runtime power management code
With the current implementation the following race can happen:

 * blk_pre_runtime_suspend() calls blk_freeze_queue_start() and
   blk_mq_unfreeze_queue().

 * blk_queue_enter() calls blk_queue_pm_only() and that function returns
   true.

 * blk_queue_enter() calls blk_pm_request_resume() and that function does
   not call pm_request_resume() because the queue runtime status is
   RPM_ACTIVE.

 * blk_pre_runtime_suspend() changes the queue status into RPM_SUSPENDING.

Fix this race by changing the queue runtime status into RPM_SUSPENDING
before switching q_usage_counter to atomic mode.

Link: https://lore.kernel.org/r/20201209052951.16136-2-bvanassche@acm.org
Fixes: 986d413b7c ("blk-mq: Enable support for runtime power management")
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Stanley Chu <stanley.chu@mediatek.com>
Co-developed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09 11:41:41 -05:00
Alan Stern
8f38f8e0a3 scsi: block: pm: Simplify resume handling
Commit 05d18ae1cc ("scsi: pm: Balance pm_only counter of request queue
during system resume") fixed a problem in the block layer's runtime-PM
code: blk_set_runtime_active() failed to call blk_clear_pm_only().
However, the commit's implementation was awkward; it forced the SCSI
system-resume handler to choose whether to call blk_post_runtime_resume()
or blk_set_runtime_active(), depending on whether or not the SCSI device
had previously been runtime suspended.

This patch simplifies the situation considerably by adding the missing
function call directly into blk_set_runtime_active() (under the condition
that the queue is not already in the RPM_ACTIVE state).  This allows the
SCSI routine to revert back to its original form.  Furthermore, making this
change reveals that blk_post_runtime_resume() (in its success pathway) does
exactly the same thing as blk_set_runtime_active().  The duplicate code is
easily removed by making one routine call the other.

No functional changes are intended.

Link: https://lore.kernel.org/r/20200706151436.GA702867@rowland.harvard.edu
CC: Can Guo <cang@codeaurora.org>
CC: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24 22:09:55 -04:00
Stanley Chu
8a15b4d7cd block: bypass blk_set_runtime_active for uninitialized q->dev
Some devices may skip blk_pm_runtime_init() and have null pointer
in its request_queue->dev. For example, SCSI devices of UFS Well-Known
LUNs.

Currently the null pointer is checked by the user of
blk_set_runtime_active(), i.e., scsi_dev_type_resume(). It is better to
check it by blk_set_runtime_active() itself instead of by its users.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-12 07:11:56 -06:00
Christoph Hellwig
0d945c1f96 block: remove the queue_lock indirection
With the legacy request path gone there is no good reason to keep
queue_lock as a pointer, we can always use the embedded lock now.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Fixed floppy and blk-cgroup missing conversions and half done edits.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:17:28 -07:00
Bart Van Assche
986d413b7c blk-mq: Enable support for runtime power management
Now that the blk-mq core processes power management requests
(marked with RQF_PREEMPT) in other states than RPM_ACTIVE, enable
runtime power management for blk-mq.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-26 15:11:29 -06:00
Bart Van Assche
7cedffec8e block: Make blk_get_request() block for non-PM requests while suspended
Instead of allowing requests that are not power management requests
to enter the queue in runtime suspended status (RPM_SUSPENDED), make
the blk_get_request() caller block. This change fixes a starvation
issue: it is now guaranteed that power management requests will be
executed no matter how many blk_get_request() callers are waiting.
For blk-mq, instead of maintaining the q->nr_pending counter, rely
on q->q_usage_counter. Call pm_runtime_mark_last_busy() every time a
request finishes instead of only if the queue depth drops to zero.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-26 15:11:29 -06:00
Bart Van Assche
bca6b067b0 block: Move power management code into a new source file
Move the code for runtime power management from blk-core.c into the
new source file blk-pm.c. Move the corresponding declarations from
<linux/blkdev.h> into <linux/blk-pm.h>. For CONFIG_PM=n, leave out
the declarations of the functions that are not used in that mode.
This patch not only reduces the number of #ifdefs in the block layer
core code but also reduces the size of header file <linux/blkdev.h>
and hence should help to reduce the build time of the Linux kernel
if CONFIG_PM is not defined.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-26 15:11:28 -06:00