When building the Surface Aggregator Module (SAM) core, registry, and
other SAM client drivers as builtin modules (=y), proper initialization
order is not guaranteed. Due to this, client driver registration
(triggered by device registration in the registry) races against bus
initialization in the core.
If any attempt is made at registering the device driver before the bus
has been initialized (i.e. if bus initialization fails this race) driver
registration will fail with a message similar to:
Driver surface_battery was unable to register with bus_type surface_aggregator because the bus was not initialized
Switch from module_init() to subsys_initcall() to resolve this issue.
Note that the serdev subsystem uses postcore_initcall() so we are still
able to safely register the serdev device driver for the core.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Reported-by: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220429195738.535751-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The new Surface Pro 8 uses GPEs for lid events as well. Add an entry for
that so that the lid can be used to wake the device. Note that this is a
device with a keyboard type-cover, where this acts as the "lid".
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220429180049.1282447-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There was an issue with the dual fan probe whereby the probe was
failing as it assuming that second_fan support was not available.
Corrected the logic so the probe works correctly. Cleaned up so
quirks only used if 2nd fan not detected.
Tested on X1 Carbon 10 (2 fans), X1 Carbon 9 (2 fans) and T490 (1 fan)
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220502191200.63470-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Lenovo laptops that contain NVME SSDs across a variety of generations have
trouble resuming from suspend to idle when the IOMMU translation layer is
active for the NVME storage device.
This generally manifests as a large resume delay or page faults. These
delays and page faults occur as a result of a Lenovo BIOS specific SMI
that runs during the D3->D0 transition on NVME devices.
This SMI occurs because of a flag that is set during resume by Lenovo
firmware:
```
OperationRegion (PM80, SystemMemory, 0xFED80380, 0x10)
Field (PM80, AnyAcc, NoLock, Preserve)
{
SI3R, 1
}
Method (_ON, 0, NotSerialized) // _ON_: Power On
{
TPST (0x60D0)
If ((DAS3 == 0x00))
{
If (SI3R)
{
TPST (0x60E0)
M020 (NBRI, 0x00, 0x00, 0x04, (NCMD | 0x06))
M020 (NBRI, 0x00, 0x00, 0x10, NBAR)
APMC = HDSI /* \HDSI */
SLPS = 0x01
SI3R = 0x00
TPST (0x60E1)
}
D0NV = 0x01
}
}
```
Create a quirk that will run early in the resume process to prevent this
SMI from running. As any of these machines are fixed, they can be peeled
back from this quirk or narrowed down to individual firmware versions.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1910
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1689
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mark Pearson <markpearson@lenvo.com>
Link: https://lore.kernel.org/r/20220429030501.1909-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
DMI matching in thinkpad_acpi happens local to a function meaning
quirks can only match that function.
Future changes to thinkpad_acpi may need to quirk other code, so
change this to use a quirk infrastructure.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mark Pearson <markpearson@lenvo.com>
Link: https://lore.kernel.org/r/20220429030501.1909-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Sparse reports this issue
core.c: note: in included file:
core.h:239:12: warning: symbol 'pmc_lpm_modes' was not declared. Should it be static?
Global variables should not be defined in headers. This only works
because core.h is only included by core.c. Single file use
variables should be static, so change its storage-class specifier
to static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220423123048.591405-1-trix@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix bug that added an offset to the mailbox addr during multi-packet
reads. Did not affect current ABI since it doesn't support multi-packet
transactions.
Fixes: 2546c60004 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-4-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Due to change in firmware flow, update mailbox writes to poll on ready bit
instead of run_busy bit. This change makes the polling method consistent
for both writes and reads, which also uses the ready bit.
Fixes: 2546c60004 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-3-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
To prevent an agent from indefinitely holding the mailbox firmware has
implemented a leaky bucket algorithm. Repeated access to the mailbox may
now incur a delay of up to 2.1 seconds. Add a retry loop that tries for
up to 2.5 seconds to acquire the mailbox.
Fixes: 2546c60004 ("platform/x86: Add Intel Software Defined Silicon driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220420155622.1763633-2-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Loading this driver in guests results in unchecked MSR access error for
MSR 0x620.
There is no use of reading and modifying package/die scope uncore MSRs
in guests. So check for CPU feature X86_FEATURE_HYPERVISOR to prevent
loading of this driver in guests.
Fixes: dbce412a77 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215870
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220427100304.2562990-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This works on my system.
Signed-off-by: Darryn Anton Jordan <darrynjordan@icloud.com>
Acked-by: Thomas Weißschuh <thomas@weissschuh.net>
Link: https://lore.kernel.org/r/Ylguq87YG+9L3foV@hark
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Latitude 7520 supports AC timeouts, but it has no KBD_LED_AC_TOKEN
and so changes to stop_timeout appear to have no effect if the laptop
is plugged in.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20220426120827.12363-1-gabriele.mzt@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Before this commit fan_curve_check_present() was trying to not cause
the probe to fail on devices without fan curve control by testing for
known error codes returned by asus_wmi_evaluate_method_buf().
Checking for ENODATA or ENODEV, with the latter being returned by this
function when an ACPI integer with a value of ASUS_WMI_UNSUPPORTED_METHOD
is returned. But for other ACPI integer returns this function just returns
them as is, including the ASUS_WMI_DSTS_UNKNOWN_BIT value of 2.
On the Asus U36SD ASUS_WMI_DSTS_UNKNOWN_BIT gets returned, leading to:
asus-nb-wmi: probe of asus-nb-wmi failed with error 2
Instead of playing whack a mole with error codes here, simply treat all
errors as there not being any fan curves, fixing the driver no longer
loading on the Asus U36SD laptop.
Fixes: e3d13da7f7 ("platform/x86: asus-wmi: Fix regression when probing for fan curve control")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2079125
Cc: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220427114956.332919-1-hdegoede@redhat.com
This code tests for if the obj->buffer.length is larger than the buffer
but then it just does the memcpy() anyway.
Fixes: 0f0ac158d2 ("platform/x86: asus-wmi: Add support for custom fan curves")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220413073744.GB8812@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Build of intel-speed-select will fail if you run:
$ LDFLAGS="-Wl,--as-needed" /usr/bin/make V=1
...
gcc -O2 -Wall -g -D_GNU_SOURCE -Iinclude -I/usr/include/libnl3 -Wl,--as-needed -lnl-genl-3 -lnl-3 intel-speed-select-in.o -o intel-speed-select
/usr/bin/ld: intel-speed-select-in.o: in function `handle_event':
(...)/linux/tools/power/x86/intel-speed-select/hfi-events.c:189: undefined reference to `nlmsg_hdr'
...
In this case the problem is that order when linking matters when using
the flag -Wl,--as-needed, symbols not used at that point are discarded.
So since intel-speed-select-in.o comes after, at that point the
libraries/symbols are already discarded and then missing/undefined
references are reported.
To fix this, make sure we specify LDFLAGS after the object file.
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Link: https://lore.kernel.org/r/20220404210525.725611-1-herton@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since commit b1f66033cd ("platform/x86: amd-pmc: Move to later in the
suspend process") amd-pmc doesn't use traditional suspend resume
callback anymore but relies on functions only created declared when
CONFIG_SUSPEND is set.
Check for CONFIG_SUSPEND and only use those functions in those
circumstances.
Fixes: commit b1f66033cd ("platform/x86: amd-pmc: Move to later in the suspend process")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220402231122.3877-1-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since there is already a generic function strstarts() that check if a
string starts with a given prefix, cleanup str_starts_with().
Signed-off-by: Wei Li <liwei391@huawei.com>
Acked-by: Peter Kästle <peter@piie.net>
Link: https://lore.kernel.org/r/20220326020249.3266561-1-liwei391@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix the following warnings from "make htmldocs":
Documentation/ABI/testing/sysfs-class-firmware-attributes:130:
ERROR: Unexpected indentation.
ERROR: Unexpected indentation.
ERROR: Unexpected indentation.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220324164737.21765-3-hdegoede@redhat.com
Fix the following warnings from "make htmldocs":
Documentation/ABI/testing/sysfs-driver-intel_sdsi:2:
WARNING: Unexpected indentation.
WARNING: Block quote ends without a blank line; unexpected unindent.
WARNING: Definition list ends without a blank line; unexpected unindent.
By turning the error-code table into a proper ReST table. While at it
also fix the error-code table mixing tab and spaces for indentation
(switch to all tabs).
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220324164737.21765-2-hdegoede@redhat.com
Clean up the following includecheck warning:
drivers/platform/x86/barco-p50-gpio.c: linux/io.h is included more than once.
No functional change.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Link: https://lore.kernel.org/r/1648021825-6182-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Eliminate the follow smatch warnings:
drivers/platform/x86/samsung-laptop.c:1124 kbd_led_set() warn: unsigned
'value' is never less than zero.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220322061830.105579-1-jiapeng.chong@linux.alibaba.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Complete some clean-ups as reqested from the last review as follow-ups
- Remove certificate from structure as no need to store it any more
- Clean up return code handling
- Moved freeing of signature to before admin object released (issue
seen in testing when unloading module)
- Minor code flow improvements
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220321180624.4761-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- Rename the staging files to give them some meaning.
Just stage1,stag2,etc, does not show what they are for
- Check for NULL from allocation in bootconfig
- Hold event mutex for dyn_event call in user events
- Mark user events to broken (to work on the API)
- Remove eBPF updates from user events
- Remove user events from uapi header to keep it from being installed.
- Move ftrace_graph_is_dead() into inline as it is called from hot paths
and also convert it into a static branch.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYkmyIBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qutfAQD90gbUgFMFe2akF5sKhonF5T6mm0+w
BsWqNlBEKBxmfwD+Krfpxql/PKp/gCufcIUUkYC4E6Wl9akf3eO1qQel1Ao=
=ZTn1
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
- Rename the staging files to give them some meaning. Just
stage1,stag2,etc, does not show what they are for
- Check for NULL from allocation in bootconfig
- Hold event mutex for dyn_event call in user events
- Mark user events to broken (to work on the API)
- Remove eBPF updates from user events
- Remove user events from uapi header to keep it from being installed.
- Move ftrace_graph_is_dead() into inline as it is called from hot
paths and also convert it into a static branch.
* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Move user_events.h temporarily out of include/uapi
ftrace: Make ftrace_graph_is_dead() a static branch
tracing: Set user_events to BROKEN
tracing/user_events: Remove eBPF interfaces
tracing/user_events: Hold event_mutex during dyn_event_add
proc: bootconfig: Add null pointer check
tracing: Rename the staging files for trace_events
dropping rate range requests. It's best to keep various systems booting
so we'll kick this out and try again next time.
-----BEGIN PGP SIGNATURE-----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=OJT3
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"A single revert to fix a boot regression seen when clk_put() started
dropping rate range requests. It's best to keep various systems
booting so we'll kick this out and try again next time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Revert "clk: Drop the rate range on clk_put()"
- Make the prctl() for enabling dynamic XSTATE components correct so it
adds the newly requested feature to the permission bitmap instead of
overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor cannot
emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it takes
the feature set of the fpstate buffer into account. The feature sets
can differ between host and guest buffers. Guest buffers do not contain
supervisor states. So far this was not an issue, but with enabling
PASID it needs to be handled in the buffer offset calculation and in
the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the values
early in the FPU/XSTATE code.
- Enable CONFIG_WERROR for X86.
- Make the X86 defconfigs more useful by adapting them to Y2022 reality.
-----BEGIN PGP SIGNATURE-----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=GK27
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
generalized.
-----BEGIN PGP SIGNATURE-----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=mJKF
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RT signal fix from Thomas Gleixner:
"Revert the RT related signal changes. They need to be reworked and
generalized"
* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
- fix a regression in dma remap handling vs AMD memory encryption (me)
- finally kill off the legacy PCI DMA API (Christophe JAILLET)
-----BEGIN PGP SIGNATURE-----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=q+vI
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping
Pull more dma-mapping updates from Christoph Hellwig:
- fix a regression in dma remap handling vs AMD memory encryption (me)
- finally kill off the legacy PCI DMA API (Christophe JAILLET)
* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: move pgprot_decrypted out of dma_pgprot
PCI/doc: cleanup references to the legacy PCI DMA API
PCI: Remove the deprecated "pci-dma-compat.h" API
This reverts commit 7dabfa2bc4. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com
Cc: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
- Avoid SEGV if core.cpus isn't set in 'perf stat'.
- Stop depending on .git files for building PERF-VERSION-FILE, used in
'perf --version', fixing some perf tools build scenarios.
- Convert tracepoint.py example to python3.
- Update UAPI header copies from the kernel sources:
socket, mman-common, msr-index, KVM, i915 and cpufeatures.
- Update copy of libbpf's hashmap.c.
- Directly return instead of using local ret variable in
evlist__create_syswide_maps(), found by coccinelle.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYkhUwgAKCRCyPKLppCJ+
JyjjAQCSTOHqJfrxCvt+VeZvAlZv5FVYosGBUXQTwZuWLV4LtAEA7+Q3VApPDskc
Izd4hgtR+g5ukHH5G1pgPZpCbTGnrgg=
=/yvf
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Avoid SEGV if core.cpus isn't set in 'perf stat'.
- Stop depending on .git files for building PERF-VERSION-FILE, used in
'perf --version', fixing some perf tools build scenarios.
- Convert tracepoint.py example to python3.
- Update UAPI header copies from the kernel sources: socket,
mman-common, msr-index, KVM, i915 and cpufeatures.
- Update copy of libbpf's hashmap.c.
- Directly return instead of using local ret variable in
evlist__create_syswide_maps(), found by coccinelle.
* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf python: Convert tracepoint.py example to python3
perf evlist: Directly return instead of using local ret variable
perf cpumap: More cpu map reuse by merge.
perf cpumap: Add is_subset function
perf evlist: Rename cpus to user_requested_cpus
perf tools: Stop depending on .git files for building PERF-VERSION-FILE
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools kvm headers arm64: Update KVM headers from the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf beauty: Update copy of linux/socket.h with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
perf stat: Avoid SEGV if core.cpus isn't set
* Documentation improvements
* Prevent module exit until all VMs are freed
* PMU Virtualization fixes
* Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
* Other miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJIGV8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO5FQgAhls4+Nu+NqId/yvvyNxr3vXq0dHI
hLlHtvzgGzZisZ7y2bNeyIpJVBDT5LCbrptPD/5eTvchVswDh0+kCVC0Uni5ugGT
tLT/Pv9Oq9e0X7aGdHRyuHIivIFDC20zIZO2DV48Lrj/+r6DafB2Fghq2XQLlBxN
p8KislvuqAAos543BPC1+Lk3dhOLuZ8qcFD8wGRlcCwjNwYaitrQ16rO04cLfUur
OwIks1I6TdI2JpLBhm6oWYVG/YnRsoo4bQE8cjdQ6yNSbwWtRpV33q7X6onw8x8K
BEeESoTnMqfaxIF/6mPl6bnDblVHFp6Xhld/vJcgeWQTdajFtuFE/K4sCA==
=xnQ6
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
- Documentation improvements
- Prevent module exit until all VMs are freed
- PMU Virtualization fixes
- Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
- Other miscellaneous bugfixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: fix sending PV IPI
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
KVM: x86: Remove redundant vm_entry_controls_clearbit() call
KVM: x86: cleanup enter_rmode()
KVM: x86: SVM: fix tsc scaling when the host doesn't support it
kvm: x86: SVM: remove unused defines
KVM: x86: SVM: move tsc ratio definitions to svm.h
KVM: x86: SVM: fix avic spec based definitions again
KVM: MIPS: remove reference to trap&emulate virtualization
KVM: x86: document limitations of MSR filtering
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
KVM: x86: Trace all APICv inhibit changes and capture overall status
KVM: x86: Add wrappers for setting/clearing APICv inhibits
KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
KVM: X86: Handle implicit supervisor access with SMAP
KVM: X86: Rename variable smap to not_smap in permission_fault()
...
This log message was accidentally chopped off.
I was wondering why this happened, but checking the ML log, Mark
precisely followed my suggestion [1].
I just used "..." because I was too lazy to type the sentence fully.
Sorry for the confusion.
[1]: https://lore.kernel.org/all/CAK7LNAR6bXXk9-ZzZYpTqzFqdYbQsZHmiWspu27rtsFxvfRuVA@mail.gmail.com/
Fixes: 4a6795933a ("kbuild: modpost: Explicitly warn about unprototyped symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
-----BEGIN PGP SIGNATURE-----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=F9xx
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block
Pull block driver fix from Jens Axboe:
"Got two reports on nbd spewing warnings on load now, which is a
regression from a commit that went into your tree yesterday.
Revert the problematic change for now"
* tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block:
Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"
cros_ec_typec:
* platform/chrome: cros_ec_typec: Check for EC device - Fix a crash when using
the cros_ec_typec driver on older hardware not capable of typec commands.
* Make try power role optional.
* Mux configuration reorganization series from Prashant.
cros_ec_debugfs:
* Fix use after free. Thanks Tzung-bi.
sensorhub:
* cros_ec_sensorhub fixup - Split trace include file
misc:
* Add new mailing list for chrome-platform development.
chrome-platform@lists.linux.dev. Now with patchwork!
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCYkZBeAAKCRBzbaomhzOw
wuUbAP9GaC3906dMf4zucME+icojYFQSeQFMJfS0kMdKBtJROAEArsEilx5aFf7Q
PlyoaaJ7aWpLO3pnUdUNwQM0hJPLGwo=
=me9M
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Check for EC device - Fix a crash when using the cros_ec_typec
driver on older hardware not capable of typec commands
- Make try power role optional
- Mux configuration reorganization series from Prashant
cros_ec_debugfs:
- Fix use after free. Thanks Tzung-bi
sensorhub:
- cros_ec_sensorhub fixup - Split trace include file
misc:
- Add new mailing list for chrome-platform development:
chrome-platform@lists.linux.dev
Now with patchwork!"
* tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_debugfs: detach log reader wq from devm
platform: chrome: Split trace include file
platform/chrome: cros_ec_typec: Update mux flags during partner removal
platform/chrome: cros_ec_typec: Configure muxes at start of port update
platform/chrome: cros_ec_typec: Get mux state inside configure_mux
platform/chrome: cros_ec_typec: Move mux flag checks
platform/chrome: cros_ec_typec: Check for EC device
platform/chrome: cros_ec_typec: Make try power role optional
MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
This reverts commit 6d35d04a9e.
Both Gabriel and Borislav report that this commit casues a regression
with nbd:
sysfs: cannot create duplicate filename '/dev/block/43:0'
Revert it before 5.18-rc1 and we'll investigage this separately in
due time.
Link: https://lore.kernel.org/all/YkiJTnFOt9bTv6A2@zn.tnic/
Reported-by: Gabriel L. Somlo <somlo@cmu.edu>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After being merged, user_events become more visible to a wider audience
that have concerns with the current API.
It is too late to fix this for this release, but instead of a full
revert, just mark it as BROKEN (which prevents it from being selected in
make config). Then we can work finding a better API. If that fails,
then it will need to be completely reverted.
To not have the code silently bitrot, still allow building it with
COMPILE_TEST.
And to prevent the uapi header from being installed, then later changed,
and then have an old distro user space see the old version, move the
header file out of the uapi directory.
Surround the include with CONFIG_COMPILE_TEST to the current location,
but when the BROKEN tag is taken off, it will use the uapi directory,
and fail to compile. This is a good way to remind us to move the header
back.
Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home
Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While user_events API is under development and has been marked for broken
to not let the API become fixed, move the header file out of the uapi
directory. This is to prevent it from being installed, then later changed,
and then have an old distro user space update with a new kernel, where
applications see the user_events being available, but the old header is in
place, and then they get compiled incorrectly.
Also, surround the include with CONFIG_COMPILE_TEST to the current
location, but when the BROKEN tag is taken off, it will use the uapi
directory, and fail to compile. This is a good way to remind us to move
the header back.
Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home
Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com
Link: https://lkml.kernel.org/r/20220401143903.188384f3@gandalf.local.home
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
ftrace_graph_is_dead() is used on hot paths, it just reads a variable
in memory and is not worth suffering function call constraints.
For instance, at entry of prepare_ftrace_return(), inlining it avoids
saving prepare_ftrace_return() parameters to stack and restoring them
after calling ftrace_graph_is_dead().
While at it using a static branch is even more performant and is
rather well adapted considering that the returned value will almost
never change.
Inline ftrace_graph_is_dead() and replace 'kill_ftrace_graph' bool
by a static branch.
The performance improvement is noticeable.
Link: https://lkml.kernel.org/r/e0411a6a0ed3eafff0ad2bc9cd4b0e202b4617df.1648623570.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make sure the event_mutex is properly held during dyn_event_add call.
This is required when adding dynamic events.
Link: https://lkml.kernel.org/r/20220328223225.1992-1-beaub@linux.microsoft.com
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
kzalloc is a memory allocation function which can return NULL when some
internal memory errors happen. It is safer to add null pointer check.
Link: https://lkml.kernel.org/r/20220329104004.2376879-1-lv.ruyi@zte.com.cn
Cc: stable@vger.kernel.org
Fixes: c1a3c36017 ("proc: bootconfig: Add /proc/bootconfig to show boot config list")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When looking for implementation of different phases of the creation of the
TRACE_EVENT() macro, it is pretty useless when all helper macro
redefinitions are in files labeled "stageX_defines.h". Rename them to
state which phase the files are for. For instance, when looking for the
defines that are used to create the event fields, seeing
"stage4_event_fields.h" gives the developer a good idea that the defines
are in that file.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
