The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.
Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:
struct property *prop;
const __be32 *p;
u32 val;
of_property_for_each_u32(np, "xyz", prop, p, val) { ... }
to this:
u32 val;
of_property_for_each_u32(np, "xyz", val) { ... }
However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.
Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:
- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes
All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The current usage of memblock_reserve() in init_pvh_bootparams() is done before
the .bss is zeroed, and that used to be fine when
memblock_reserved_init_regions implicitly ended up in the .meminit.data
section. However after commit 73db3abdca memblock_reserved_init_regions
ends up in the .bss section, thus breaking it's usage before the .bss is
cleared.
Move and rename the call to xen_reserve_extra_memory() so it's done in the
x86_init.oem.arch_setup hook, which gets executed after the .bss has been
zeroed, but before calling e820__memory_setup().
Fixes: 73db3abdca ("init/modpost: conditionally check section mismatch to __meminit*")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240725073116.14626-3-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
In preparation for making the function static.
No functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240725073116.14626-2-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The 'Fixes' commit recently changed the behaviour of TCP by skipping the
processing of the 3rd ACK when a sk->sk_socket is set. The goal was to
skip tcp_ack_snd_check() in tcp_rcv_state_process() not to send an
unnecessary ACK in case of simultaneous connect(). Unfortunately, that
had an impact on TFO and MPTCP.
I started to look at the impact on MPTCP, because the MPTCP CI found
some issues with the MPTCP Packetdrill tests [1]. Then Paolo Abeni
suggested me to look at the impact on TFO with "plain" TCP.
For MPTCP, when receiving the 3rd ACK of a request adding a new path
(MP_JOIN), sk->sk_socket will be set, and point to the MPTCP sock that
has been created when the MPTCP connection got established before with
the first path. The newly added 'goto' will then skip the processing of
the segment text (step 7) and not go through tcp_data_queue() where the
MPTCP options are validated, and some actions are triggered, e.g.
sending the MPJ 4th ACK [2] as demonstrated by the new errors when
running a packetdrill test [3] establishing a second subflow.
This doesn't fully break MPTCP, mainly the 4th MPJ ACK that will be
delayed. Still, we don't want to have this behaviour as it delays the
switch to the fully established mode, and invalid MPTCP options in this
3rd ACK will not be caught any more. This modification also affects the
MPTCP + TFO feature as well, and being the reason why the selftests
started to be unstable the last few days [4].
For TFO, the existing 'basic-cookie-not-reqd' test [5] was no longer
passing: if the 3rd ACK contains data, and the connection is accept()ed
before receiving them, these data would no longer be processed, and thus
not ACKed.
One last thing about MPTCP, in case of simultaneous connect(), a
fallback to TCP will be done, which seems fine:
`../common/defaults.sh`
0 socket(..., SOCK_STREAM|SOCK_NONBLOCK, IPPROTO_MPTCP) = 3
+0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+0 > S 0:0(0) <mss 1460, sackOK, TS val 100 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey>
+0 < S 0:0(0) win 1000 <mss 1460, sackOK, TS val 407 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey>
+0 > S. 0:0(0) ack 1 <mss 1460, sackOK, TS val 330 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey>
+0 < S. 0:0(0) ack 1 win 65535 <mss 1460, sackOK, TS val 700 ecr 100, nop, wscale 8, mpcapable v1 flags[flag_h] key[skey=2]>
+0 > . 1:1(0) ack 1 <nop, nop, TS val 845707014 ecr 700, nop, nop, sack 0:1>
Simultaneous SYN-data crossing is also not supported by TFO, see [6].
Kuniyuki Iwashima suggested to restrict the processing to SYN+ACK only:
that's a more generic solution than the one initially proposed, and
also enough to fix the issues described above.
Later on, Eric Dumazet mentioned that an ACK should still be sent in
reaction to the second SYN+ACK that is received: not sending a DUPACK
here seems wrong and could hurt:
0 socket(..., SOCK_STREAM|SOCK_NONBLOCK, IPPROTO_TCP) = 3
+0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+0 > S 0:0(0) <mss 1460, sackOK, TS val 1000 ecr 0,nop,wscale 8>
+0 < S 0:0(0) win 1000 <mss 1000, sackOK, nop, nop>
+0 > S. 0:0(0) ack 1 <mss 1460, sackOK, TS val 3308134035 ecr 0,nop,wscale 8>
+0 < S. 0:0(0) ack 1 win 1000 <mss 1000, sackOK, nop, nop>
+0 > . 1:1(0) ack 1 <nop, nop, sack 0:1> // <== Here
So in this version, the 'goto consume' is dropped, to always send an ACK
when switching from TCP_SYN_RECV to TCP_ESTABLISHED. This ACK will be
seen as a DUPACK -- with DSACK if SACK has been negotiated -- in case of
simultaneous SYN crossing: that's what is expected here.
Link: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/9936227696 [1]
Link: https://datatracker.ietf.org/doc/html/rfc8684#fig_tokens [2]
Link: https://github.com/multipath-tcp/packetdrill/blob/mptcp-net-next/gtests/net/mptcp/syscalls/accept.pkt#L28 [3]
Link: https://netdev.bots.linux.dev/contest.html?executor=vmksft-mptcp-dbg&test=mptcp-connect-sh [4]
Link: https://github.com/google/packetdrill/blob/master/gtests/net/tcp/fastopen/server/basic-cookie-not-reqd.pkt#L21 [5]
Link: https://github.com/google/packetdrill/blob/master/gtests/net/tcp/fastopen/client/simultaneous-fast-open.pkt [6]
Fixes: 23e89e8ee7 ("tcp: Don't drop SYN+ACK for simultaneous connect().")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240724-upstream-net-next-20240716-tcp-3rd-ack-consume-sk_socket-v3-1-d48339764ce9@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Expanding on the previous commit, assuming that rbd_is_lock_owner()
always returns true (i.e. that we are either in RBD_LOCK_STATE_LOCKED
or RBD_LOCK_STATE_QUIESCING) if the mapping is exclusive is wrong too.
In case ceph_cls_set_cookie() fails, the lock would be temporarily
released even if the mapping is exclusive, meaning that we can end up
even in RBD_LOCK_STATE_UNLOCKED.
IOW, exclusive mappings are really "just" about disabling automatic
lock transitions (as documented in the man page), not about grabbing
the lock and holding on to it whatever it takes.
Cc: stable@vger.kernel.org
Fixes: 637cd06053 ("rbd: new exclusive lock wait/wake code")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Every time a watch is reestablished after getting lost, we need to
update the cookie which involves quiescing exclusive lock. For this,
we transition from RBD_LOCK_STATE_LOCKED to RBD_LOCK_STATE_QUIESCING
roughly for the duration of rbd_reacquire_lock() call. If the mapping
is exclusive and I/O happens to arrive in this time window, it's failed
with EROFS (later translated to EIO) based on the wrong assumption in
rbd_img_exclusive_lock() -- "lock got released?" check there stopped
making sense with commit a2b1da0979 ("rbd: lock should be quiesced on
reacquire").
To make it worse, any such I/O is added to the acquiring list before
EROFS is returned and this sets up for violating rbd_lock_del_request()
precondition that the request is either on the running list or not on
any list at all -- see commit ded080c86b ("rbd: don't move requests
to the running list on errors"). rbd_lock_del_request() ends up
processing these requests as if they were on the running list which
screws up quiescing_wait completion counter and ultimately leads to
rbd_assert(!completion_done(&rbd_dev->quiescing_wait));
being triggered on the next watch error.
Cc: stable@vger.kernel.org # 06ef84c4e9c4: rbd: rename RBD_LOCK_STATE_RELEASING and releasing_wait
Cc: stable@vger.kernel.org
Fixes: 637cd06053 ("rbd: new exclusive lock wait/wake code")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
... to RBD_LOCK_STATE_QUIESCING and quiescing_wait to recognize that
this state and the associated completion are backing rbd_quiesce_lock(),
which isn't specific to releasing the lock.
While exclusive lock does get quiesced before it's released, it also
gets quiesced before an attempt to update the cookie is made and there
the lock is not released as long as ceph_cls_set_cookie() succeeds.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
This flag is now required to use tx_metadata_len.
Fixes: 40808a237d ("selftests/bpf: Add TX side to xdp_metadata")
Reported-by: Julian Schindel <mail@arctic-alpaca.de>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240713015253.121248-3-sdf@fomichev.me
Julian reports that commit 341ac980ea ("xsk: Support tx_metadata_len")
can break existing use cases which don't zero-initialize xdp_umem_reg
padding. Introduce new XDP_UMEM_TX_METADATA_LEN to make sure we
interpret the padding as tx_metadata_len only when being explicitly
asked.
Fixes: 341ac980ea ("xsk: Support tx_metadata_len")
Reported-by: Julian Schindel <mail@arctic-alpaca.de>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240713015253.121248-2-sdf@fomichev.me
Clear VSC SDP if intel_dp_set_infoframes is called from post ddi disable
routine i.e with the variable of enable as false. This is to avoid
an infoframes.enable mismatch issue which is caused when pipe is
connected to eDp which has psr then connected to DPMST. In this case
eDp's post ddi disable routine does not clear infoframes.enable VSC
for the given pipe and DPMST does not recompute VSC SDP and write
infoframes.enable which causes a mismatch.
--v2
-Make the comment match the code [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240724163743.3668407-1-suraj.kandpal@intel.com
Move the freeing of the dummy net_device from mtk_free_dev() to
mtk_remove().
Previously, if alloc_netdev_dummy() failed in mtk_probe(),
eth->dummy_dev would be NULL. The error path would then call
mtk_free_dev(), which in turn called free_netdev() assuming dummy_dev
was allocated (but it was not), potentially causing a NULL pointer
dereference.
By moving free_netdev() to mtk_remove(), we ensure it's only called when
mtk_probe() has succeeded and dummy_dev is fully allocated. This
addresses a potential NULL pointer dereference detected by Smatch[1].
Fixes: b209bd6d0b ("net: mediatek: mtk_eth_sock: allocate dummy net_device dynamically")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/4160f4e0-cbef-4a22-8b5d-42c4d399e1f7@stanley.mountain/ [1]
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240724080524.2734499-1-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=49yO
-----END PGP SIGNATURE-----
Merge tag 'nf-24-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains a Netfilter fix for net:
Patch #1 if FPU is busy, then pipapo set backend falls back to standard
set element lookup. Moreover, disable bh while at this.
From Florian Westphal.
netfilter pull request 24-07-24
* tag 'nf-24-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_pipapo_avx2: disable softinterrupts
====================
Link: https://patch.msgid.link/20240724081305.3152-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Samsung Galaxy Book3 Pro 360 sends a large amount of data to the codec
through hda processing coefficients. This data was captured using a
modified version of QEMU, but the actual content of the data remains
opaque to me. Elliding any part of the data seems to cause sound to
not work.
Signed-off-by: Nick Weihs <nick.weihs@gmail.com>
Link: https://patch.msgid.link/20240725054722.42597-1-nick.weihs@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tony Nguyen says:
====================
This series contains updates to ice driver only.
Ahmed enforces the iavf per VF filter limit on ice (PF) driver to prevent
possible resource exhaustion.
Wojciech corrects assignment of l2 flags read from firmware.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix recipe read procedure
ice: Add a per-VF limit on number of FDIR filters
====================
Link: https://patch.msgid.link/20240723233242.3146628-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sometimes during hotplug scenario or suspend/resume scenario encoder is
not always initialized when intel_hdcp_get_capability add
a check to avoid kernel null pointer dereference.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722064451.3610512-2-suraj.kandpal@intel.com
[Why]
Page table of compute VM in the VRAM will lost after gpu reset.
VRAM won't be restored since compute VM has no shadows.
[How]
Use higher 32-bit of vm->generation to record a vram_lost_counter.
Reset the VM state machine when vm->genertaion is not equal to
the new generation token.
v2: Check vm->generation instead of calling drm_sched_entity_error
in amdgpu_vm_validate.
v3: Use new generation token instead of vram_lost_counter for check.
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(cherry picked from commit 47c0388b05)
The eeprom table is empty before initializing,
set eeprom table version first before initializing.
Changed from V1:
Reuse amdgpu_ras_set_eeprom_table_version function
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 015b8a2fdf)
The ras command shared memory is allocated from
VRAM and the response status of the command
buffer will not be zero due to gpu being in
fatal error state after ras UE error injection.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8284951a6e)
In the DML math_ceil2 function, there is one ASSERT if the significance
is equal to zero. However, significance might be equal to zero
sometimes, and this is not an issue for a ceil function, but the current
ASSERT will trigger warnings in those cases. This commit removes the
ASSERT if the significance is equal to zero to avoid unnecessary noise.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 332315885d)
[why & how]
Need to make sure plane_state is initialized
before accessing its members.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Xi (Alex) Liu <xi.liu@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 295d91cbc7)
For VCN/JPEG 4.0.3, use only the local addressing scheme.
- Mask bit higher than AID0 range
v2
remain the case for mmhub use master XCC
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit caaf576292)
VCN 4.0.3 does not HDP flush with RRMT enabled. Instead, mmsch
will do the HDP flush.
This change is necessary for VCN v4.0.3, no need for backward compatibility
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 49cfaebe48)
JPEG v4.0.3 doesn't support HDP flush when RRMT is enabled. Instead,
mmsch fw will do the flush.
This change is necessary for JPEG v4.0.3, no need for backward compatibility
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 585e3fdb36)
Return 0 to avoid returning an uninitialized variable r.
Cc: stable@vger.kernel.org
Fixes: 230dd6bb61 ("drm/amd/amdgpu: implement mode2 reset on smu_v13_0_10")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6472de66c0)
If PCIe supports atomics, configure register to prevent DF from
breaking atomics in separate load/store operations.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 666f14cab2)
We seem to have a case where SDMA will sometimes miss a doorbell
if GFX is entering the powergating state when the doorbell comes in.
To workaround this, we can update the wptr via MMIO, however,
this is only safe because we disallow gfxoff in begin_ring() for
SDMA 5.2 and then allow it again in end_ring().
Enable this workaround while we are root causing the issue with
the HW team.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/3440
Tested-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(cherry picked from commit f2ac526349)
- Simplification across subsystem using cleanup.h
- Support for debugfs to read/write commands
- Few Intel and Qualcomm driver updates
-----BEGIN PGP SIGNATURE-----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=FNSV
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Simplification across subsystem using cleanup.h
- Support for debugfs to read/write commands
- Few Intel and Qualcomm driver updates
* tag 'soundwire-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: debugfs: simplify with cleanup.h
soundwire: cadence: simplify with cleanup.h
soundwire: intel_ace2x: simplify with cleanup.h
soundwire: intel_ace2x: simplify return path in hw_params
soundwire: intel: simplify with cleanup.h
soundwire: intel: simplify return path in hw_params
soundwire: amd_init: simplify with cleanup.h
soundwire: amd: simplify with cleanup.h
soundwire: amd: simplify return path in hw_params
soundwire: intel_auxdevice: start the bus at default frequency
soundwire: intel_auxdevice: add cs42l43 codec to wake_capable_list
drivers:soundwire: qcom: cleanup port maask calculations
soundwire: bus: simplify by using local slave->prop
soundwire: generic_bandwidth_allocation: change port_bo parameter to pointer
soundwire: Intel: clarify Copyright information
soundwire: intel_ace2.x: add AC timing extensions for PantherLake
soundwire: bus: add stream refcount
soundwire: debugfs: add interface to read/write commands
New support:
- New dmaengine_prep_peripheral_dma_vec() to support transfers using dma
vectors and documentation and user in AXI dma
- STMicro STM32 DMA3 support and new capabilities of cyclic dma
Updates:
- Yaml conversion for Freescale imx dma and qdma bindings, sprd sc9860 dma
binding
- Altera msgdma updates for descriptor management
-----BEGIN PGP SIGNATURE-----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=h0hh
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- New dmaengine_prep_peripheral_dma_vec() to support transfers using
dma vectors and documentation and user in AXI dma
- STMicro STM32 DMA3 support and new capabilities of cyclic dma
Updates:
- Yaml conversion for Freescale imx dma and qdma bindings,
sprd sc9860 dma binding
- Altera msgdma updates for descriptor management"
* tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dt-bindings: fsl-qdma: fix interrupts 'if' check logic
dt-bindings: dma: sprd,sc9860-dma: convert to YAML
dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: add missing MODULE_DESCRIPTION() macros
dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro
dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels
dmaengine: sh: rz-dmac: Fix lockdep assert warning
dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan()
dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM
dmaengine: qcom: gpi: remove unused struct 'reg_info'
dmaengine: moxart-dma: remove unused struct 'moxart_filter_data'
dt-bindings: fsl-qdma: Convert to yaml format
dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan
dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated
dmaengine: stm32-dma3: defer channel registration to specify channel name
dmaengine: add channel device name to channel registration
dmaengine: stm32-dma3: improve residue granularity
dmaengine: stm32-dma3: add device_pause and device_resume ops
dmaengine: stm32-dma3: add DMA_MEMCPY capability
...
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Due to a bug in earlier userspaces, a transition table may be present
even when the dfa is not. Commit 7572fea31e
("apparmor: convert fperm lookup to use accept as an index") made the
verification check more rigourous regressing old userspaces with
the bug. For compatibility reasons allow the orphaned transition table
during unpack and discard.
Fixes: 7572fea31e ("apparmor: convert fperm lookup to use accept as an index")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
If the label is not stale (which is the common case), the fact that the
passed file object holds a reference can be leverged to avoid the
ref/unref cycle. Doing so reduces performance impact of apparmor on
parallel open() invocations.
When benchmarking on a 24-core vm using will-it-scale's open1_process
("Separate file open"), the results are (ops/s):
before: 6092196
after: 8309726 (+36%)
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in security/apparmor/apparmor_policy_unpack_test.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
A "nosymfollow" flag was added in commit
dab741e0e0 ("Add a "nosymfollow" mount option.")
While we don't need to implement any special logic on
the AppArmor kernel side to handle it, we should provide
user with a correct list of mount flags in audit logs.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
-----BEGIN PGP SIGNATURE-----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=P8aI
-----END PGP SIGNATURE-----
Merge tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This adds getrandom() support to the vDSO.
First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which
lets the kernel zero out pages anytime under memory pressure, which
enables allocating memory that never gets swapped to disk but also
doesn't count as being mlocked.
Then, the vDSO implementation of getrandom() is introduced in a
generic manner and hooked into random.c.
Next, this is implemented on x86. (Also, though it's not ready for
this pull, somebody has begun an arm64 implementation already)
Finally, two vDSO selftests are added.
There are also two housekeeping cleanup commits"
* tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
MAINTAINERS: add random.h headers to RNG subsection
random: note that RNDGETPOOL was removed in 2.6.9-rc2
selftests/vDSO: add tests for vgetrandom
x86: vdso: Wire up getrandom() vDSO implementation
random: introduce generic vDSO getrandom() implementation
mm: add MAP_DROPPABLE for designating always lazily freeable mappings
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZqDFUwAKCRCRxhvAZXjc
omD6APwJKlepwDYlu5XZptI6/1kmai6SqaYnifTX1+ELR/rQQAD/Z37aho42v2JZ
NYr+KFj02vj7ryKA5OWuSD8cw+6GlwQ=
=dfob
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.11-rc1.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"VFS:
- The new 64bit mount ids start after the old mount id, i.e., at the
first non-32 bit value. However, we started counting one id too
late and thus lost 4294967296 as the first valid id. Fix that.
- Update a few comments on some vfs_*() creation helpers.
- Move copying of the xattr name out from the locks required to start
a filesystem write.
- Extend the filelock lock UAF fix to the compat code as well.
- Now that we added the ability to look up an inode under RCU it's
possible that lockless hash lookup can find and lock an inode after
it gets I_FREEING set. It then waits until inode teardown in
evict() is finished.
The flag however is still set after evict() has woken up all
waiters. If the inode lock is taken late enough on the waiting side
after hash removal and wakeup happened the waiting thread will
never be woken.
Before RCU based lookup this was synchronized via the
inode_hash_lock. But since unhashing requires the inode lock as
well we can check whether the inode is unhashed while holding inode
lock even without holding inode_hash_lock.
pidfd:
- The nsproxy structure contains nearly all of the namespaces
associated with a task. When a namespace type isn't supported
nsproxy might contain a NULL pointer or always point to the initial
namespace type. The logic isn't consistent. So when deriving
namespace fds we need to ensure that the namespace type is
supported.
First, so that we don't risk dereferncing NULL pointers. The
correct bigger fix would be to change all namespaces to always set
a valid namespace pointer in struct nsproxy independent of whether
or not it is compiled in. But that requires quite a few changes.
Second, so that we don't allow deriving namespace fds when the
namespace type doesn't exist and thus when they couldn't also be
derived via /proc/self/ns/.
- Add missing selftests for the new pidfd ioctls to derive namespace
fds. This simply extends the already existing testsuite.
netfs:
- Fix debug logging and fix kconfig variable name so it actually
works.
- Fix writeback that goes both to the server and cache. The streams
are only activated once a subreq is added. When a server write
happens the subreq doesn't need to have finished by the time the
cache write is started. If the server write has already finished by
the time the cache write is about to start the cache write will
operate on a folio that might already have been reused. Fix this by
preactivating the cache write.
- Limit cachefiles subreq size for cache writes to MAX_RW_COUNT"
* tag 'vfs-6.11-rc1.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
inode: clarify what's locked
vfs: Fix potential circular locking through setxattr() and removexattr()
filelock: Fix fcntl/close race recovery compat path
fs: use all available ids
cachefiles: Set the max subreq size for cache writes to MAX_RW_COUNT
netfs: Fix writeback that needs to go to both server and cache
pidfs: add selftests for new namespace ioctls
pidfs: handle kernels without namespaces cleanly
pidfs: when time ns disabled add check for ioctl
vfs: correct the comments of vfs_*() helpers
vfs: handle __wait_on_freeing_inode() and evict() race
netfs: Rename CONFIG_FSCACHE_DEBUG to CONFIG_NETFS_DEBUG
netfs: Revert "netfs: Switch debug logging to pr_debug()"
Commit e3ec0fe944 ("hostfs: Convert hostfs_read_folio() to use a
folio") simplified hostfs_read_folio(), but in the process of converting
to using folios natively also mis-used the folio_zero_tail() function
due to the very confusing API of that function.
Very arguably it's folio_zero_tail() API itself that is buggy, since it
would make more sense (and the documentation kind of implies) that the
third argument would be the pointer to the beginning of the folio
buffer.
But no, the third argument to folio_zero_tail() is where we should start
zeroing the tail (even if we already also pass in the offset separately
as the second argument).
So fix the hostfs caller, and we can leave any folio_zero_tail() sanity
cleanup for later.
Reported-and-tested-by: Maciej Żenczykowski <maze@google.com>
Fixes: e3ec0fe944 ("hostfs: Convert hostfs_read_folio() to use a folio")
Link: https://lore.kernel.org/all/CANP3RGceNzwdb7w=vPf5=7BCid5HVQDmz1K5kC9JG42+HVAh_g@mail.gmail.com/
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adjust quirks for 0x3a20, 0x3a30, 0x3a50 to match the 0x3a60. This
set has now been confirmed to work with this patch.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Fixes: 811dd426a9 ("ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240723011224.115579-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In ublk_ctrl_uring_cmd(), ioctl command NR should be used for
matching _IOC_NR(cmd_op).
Fix it by adding one private macro, and this way is clean.
Fixes: 13fe8e6825 ("ublk: add UBLK_CMD_DEL_DEV_ASYNC")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240724143311.2646330-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a process' cred struct is replaced, this _almost_ always invokes
the cred_prepare LSM hook; but in one special case (when
KEYCTL_SESSION_TO_PARENT updates the parent's credentials), the
cred_transfer LSM hook is used instead. Landlock only implements the
cred_prepare hook, not cred_transfer, so KEYCTL_SESSION_TO_PARENT causes
all information on Landlock restrictions to be lost.
This basically means that a process with the ability to use the fork()
and keyctl() syscalls can get rid of all Landlock restrictions on
itself.
Fix it by adding a cred_transfer hook that does the same thing as the
existing cred_prepare hook. (Implemented by having hook_cred_prepare()
call hook_cred_transfer() so that the two functions are less likely to
accidentally diverge in the future.)
Cc: stable@kernel.org
Fixes: 385975dca5 ("landlock: Set up the security framework and manage credentials")
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240724-landlock-houdini-fix-v1-1-df89a4560ca3@google.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
After adding ACPI support to populate_cache_leaves(), RISC-V can build
cacheinfo through the ACPI PPTT table, thus enabling the ACPI_PPTT
configuration.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20240617131425.7526-3-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Before cacheinfo can be built correctly, we need to initialize level
and type. Since RISC-V currently does not have a register group that
describes cache-related attributes like ARM64, we cannot obtain them
directly, so now we obtain cache leaves from the ACPI PPTT table
(acpi_get_cache_info()) and set the cache type through split_levels.
Suggested-by: Jeremy Linton <jeremy.linton@arm.com>
Suggested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20240617131425.7526-2-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
