Commit Graph

44 Commits

Author SHA1 Message Date
Masanari Iida
881b999e77 mips: Fix typo in bcm63xx/setup.c
Correct spelling "reseting" to "resetting" in
arch/mips/bcm63xx/setup.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-05 17:14:47 +01:00
Linus Torvalds
4964e0664c Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits)
  MIPS: Delete unused function add_temporary_entry.
  MIPS: Set default pci cache line size.
  MIPS: Flush huge TLB
  MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM.
  MIPS: Octeon: Add support for OCTEON II PCIe
  MIPS: Octeon: Update PCI Latency timer and enable more error reporting.
  MIPS: Alchemy: Update cpu-feature-overrides
  MIPS: Alchemy: db1200: Improve PB1200 detection.
  MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code.
  MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller
  MIPS: Alchemy: irq: register pm at irq init time
  MIPS: Alchemy: Touchscreen support on DB1100
  MIPS: Alchemy: Hook up IrDA on DB1000/DB1100
  net/irda: convert au1k_ir to platform driver.
  MIPS: Alchemy: remove unused board headers
  MTD: nand: make au1550nd.c a platform_driver
  MIPS: Netlogic: Mark Netlogic chips as SMT capable
  MIPS: Netlogic: Add support for XLP 3XX cores
  MIPS: Netlogic: Merge some of XLR/XLP wakup code
  MIPS: Netlogic: Add default XLP config.
  ...

Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c,
traps.c} and drivers/tty/serial/Makefile
2012-01-14 13:05:21 -08:00
Jonas Gorski
f4aa7adb8b MIPS: BCM63XX: use the new bcm63xxpart parser
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09 18:16:25 +00:00
Florian Fainelli
b15a6d62b5 MIPS: BCM63XX: generate WLAN MAC address after registering ethernet devices.
In case the MAC address pool is not big enough to also register a WLAN device
prefer registering the Ethernet devices.

[ralf@linux-mips.org: Fixed formatting as per Sergei's complaint.]

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3013/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:03:04 +00:00
Florian Fainelli
92d9ae2026 MIPS: BCM63xx: Fix GPIO set/get for BCM6345
On BCM6345, the register offsets for the set/get GPIO registers is wrong.
Use the same logic as the one present in arch/mips/bcm63xx/irq.c to
define the correct gpio_out_low_reg value when support for BCM6345
is compiled in.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3010/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:03:04 +00:00
Florian Fainelli
e1c96c8620 MIPS: BCM63xx: Remove BCM6345 hacks to read base boot address
Though BCM6345 does not technically have the same MPI register layout
than the other SoCs, reading the chip-select registers is done the same
way, and particularly for chip-select 0, which is the boot flash.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3009/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:03:04 +00:00
Florian Fainelli
d61fcfe2bb MIPS: BCM63xx: Fix SDRAM size computation for BCM6345
Instead of hardcoding the amount of available RAM, read the number of
effective multiples of 8MB from SDRAM_MBASE_REG.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3008/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:03:04 +00:00
Maxime Bizon
04712f3ff6 MIPS: BCM63XX: Add support for bcm6368 CPU.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2892/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:03:04 +00:00
Maxime Bizon
6224892c81 MIPS: BCM63XX: Add external irq support for non 6348 CPUs.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2899/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:03:04 +00:00
Maxime Bizon
71a43927b3 MIPS: BCM63XX: Handle 64 bits irq stat register in irq code.
bcm6368 has larger irq registers, prepare for this.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2898/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:03:03 +00:00
Maxime Bizon
37c42a741f MIPS: BCM63XX: Prepare irq code to handle different external irq hardware implementation.
External irq only works for 6348, change code to prepare support of
other CPUs.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2895/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:03:03 +00:00
Maxime Bizon
f61cced993 MIPS: BCM63XX: Change irq code to prepare for per-cpu peculiarity.
No functionnal change is introduced by this patch.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2894/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:03:03 +00:00
Maxime Bizon
ec68c5206a MIPS: BCM63XX: Cleanup cpu registers.
Use preprocessor when possible to avoid duplicated and error-prone
code.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2897/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:03:03 +00:00
Maxime Bizon
d64ed7ada2 MIPS: BCM63XX: Call board_register_device from device_initcall()
Some device registration (eg leds), expect subsystem initcall to be
run first, so move board device registration to device_initcall().

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2891/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:03:02 +00:00
Wu Zhangjin
5a4a4ad851 MIPS: Mark cascade and low level interrupts IRQF_NO_THREAD
Mark interrupts with no_action handler, cascade interrupts, low level
interrupts (bus error, halt ..) with IRQF_NO_THREAD to exclude them
from forced threading.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-21 17:52:15 +02:00
Hauke Mehrtens
b3ae52b6b0 SSB: Change fallback sprom to callback mechanism.
Some embedded devices like the Netgear WNDR3300 have two SSB based cards
without an own sprom on the pci bus. We have to provide two different
fallback sproms for these and this was not possible with the old solution.
In the bcm47xx architecture the sprom data is stored in the nvram in the
main flash storage. The architecture code will be able to fill the sprom
with the stored data based on the bus where the device was found.

The bcm63xx code should do the same thing as before, just using the new
API.

Acked-by: Michael Buesch <mb@bu3sch.de>
Cc: netdev@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2362/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:47 +01:00
Thomas Gleixner
e4ec7989b4 MIPS: Convert the irq functions to the new names
Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:07 +02:00
Thomas Gleixner
93f2936104 MIPS: bcm63xx: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2176/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25 18:45:15 +01:00
matt mooney
e3726304a2 mips: change to new flag variable
Replace EXTRA_CFLAGS with ccflags-y.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-03-17 14:02:56 +01:00
Kevin Cernekee
602977b0d6 MIPS: Decouple BMIPS CPU support from bcm47xx/bcm63xx SoC code
BMIPS processor cores are used in 50+ different chipsets spread across
5+ product lines.  In many cases the chipsets do not share the same
peripheral register layouts, the same register blocks, the same
interrupt controllers, the same memory maps, or much of anything else.

But, across radically different SoCs that share nothing more than the
same BMIPS CPU, a few things are still mostly constant:

SMP operations
Access to performance counters
DMA cache coherency quirks
Cache and memory bus configuration

So, it makes sense to treat each BMIPS processor type as a generic
"building block," rather than tying it to a specific SoC.  This makes it
easier to support a large number of BMIPS-based chipsets without
unnecessary duplication of code, and provides the infrastructure needed
to support BMIPS-proprietary features.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: mbizon@freebox.fr
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Florian Fainelli <ffainelli@freebox.fr>
Patchwork: https://patchwork.linux-mips.org/patch/1706/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2010-10-29 19:08:50 +01:00
David Howells
ca4d3e6746 MIPS: Add missing #inclusions of <linux/irq.h>
Add missing #inclusions of <linux/irq.h> to a whole bunch of files that should
really include it.  Note that this can replace #inclusions of <asm/irq.h>.

This is required for the patch to sort out irqflags handling function naming to
compile on MIPS.

The problem is that these files require access to things like setup_irq() -
which isn't available by #including <linux/interrupt.h>

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-07 14:08:54 +01:00
Ralf Baechle
f5e8abd6f1 MIPS: BCM63xx: Migrate to new platform makefile style.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05 13:25:54 +01:00
Florian Fainelli
7f13f65e61 MIPS: BCM63xx: Prevent second enet registration on BCM6338
This SoC has only one ethernet MAC, so prevent registration of a second one.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1482/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26 19:08:18 +01:00
Florian Fainelli
3e1bf29f73 MIPS: BCM63xx: Avoid namespace clash on GPIO_DIR_{IN,OUT}
This is too generic a name, so prefix it with BCM63XX_ to avoid potential
namespace clashes when including <asm/gpio.h>.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
To:     linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1171/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21 21:31:22 +01:00
Florian Fainelli
5e3644a95d MIPS: BCM63xx: Fix build failure in board_bcm963xx.c
Since 2083e8327aeeaf818b0e4522a9d2539835c60423, the SPROM is now registered
in the board_prom_init callback, but it references variables and functions
which are declared below.  Move the variables and functions above
board_prom_init.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1077/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:20 +01:00
Maxime Bizon
9538ca636f MIPS: BCM63xx: Initialize gpio_out_low & out_high to current value at boot.
To avoid a glitch during GPIO initialisation read GPIO output register
values left by the firmware.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/903/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:19 +01:00
Florian Fainelli
e23a90eb73 MIPS: BCM63xx: Register SSB SPROM fallback in board's first stage callback
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
To: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1017/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:18 +01:00
Maxime Bizon
524ef29cff MIPS: BCM63xx: Add support for second uart.
The BCm63xx SOC has two uarts.  Some boards use the second one for
bluetooth.  This patch changes platform device registration code to
handle this.  Changes to the UART driver were already merged in
6a2c7eabfd.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Patchwork: http://patchwork.linux-mips.org/patch/900/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:18 +01:00
Maxime Bizon
97befcf4f0 MIPS: BCM63xx: Fix double gpio registration.
bcm63xx_gpio_init is already called from prom_init to allow board to use
them early, so we can remove the unneeded arch_initcall.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Patchwork: http://patchwork.linux-mips.org/patch/899/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:17 +01:00
Florian Fainelli
f29b7cac19 MIPS: BCM63xx: Add DWVS0 board
The DWVS0 board is a BCM6358-based board with an on-board OHCI controler.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1015/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:17 +01:00
Florian Fainelli
2e6ad9a958 MIPS: BCM63xx: Add the RTA1025W-16 BCM6348-based board to suppported boards.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1014/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:17 +01:00
Ralf Baechle
d8d607d59e MIPS: BCM63xx: Convert timer locks to raw spinlocks.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27 12:53:35 +01:00
Ralf Baechle
e0e53dee69 MIPS: Nuke trailing blank lines
Recent git versions now warn about those and they've always been a bit of
an annoyance.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27 12:53:14 +01:00
Yoichi Yuasa
0622870a64 MIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE.
Builtin cmdline is copied by arch_mem_init().

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/812/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12 18:19:36 +01:00
Florian Fainelli
05c694681e MIPS: BCM63xx: Fix whitespace damaged board_bcm963xx.c
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12 18:19:30 +01:00
Florian Fainelli
2b5b9b786c MIPS: bcm63xx: Set the correct BCM3302 CPU name
For consistency with other BCM63xx SoC set the CPU name to "Broadcom
BCM6338" when actually running on that system.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-02 12:00:07 +01:00
Florian Fainelli
2cfac7f7f2 MIPS: BCM63xx: Prepare for watchdog support
This patch prepares the board code to register a bcm63xx_wdt
platform_device that we are going to use in a subsequent patch.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-02 12:00:03 +01:00
Florian Fainelli
6c1e7a5ad9 MIPS: BCM63xx: Make bcm63xx_uart_register an initfunc
This patch removes the calls to bcm63xx_uart_register in board_bcm963xx.c
and make bcm63xx_uart_register an initfunc.  Allows us to remove
bcm63xx_dev_uart.h which was there to make checkpatch.pl happy.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-02 12:00:03 +01:00
Florian Fainelli
e85d59df13 MIPS: BCM63xx: Fix soft-reset lockup on BCM6345
This patch fixes a lockup on BCM6345 where setting the PLL soft reset bit
will also lock the other blocks including UART.  Instead of setting only
the PLL soft reset bit in the software reset register, set this bit but do
not touch the others.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-02 12:00:03 +01:00
Maxime Bizon
553d6d5f5b MIPS: BCM63xx: Add PCMCIA & Cardbus support.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-30 21:47:01 +02:00
Maxime Bizon
9fcd66e572 MIPS: BCM63xx: Add serial driver for bcm63xx integrated UART.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-30 21:46:59 +02:00
Huang Weiyi
6fae5311a9 MIPS: BCM63xx: Remove duplicated #include
Remove duplicated #include in arch/mips/bcm63xx/boards/board_bcm963xx.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-30 21:46:58 +02:00
Maxime Bizon
9b1fc55a05 MIPS: BCM63xx: Add integrated ethernet mac support.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17 20:07:53 +02:00
Maxime Bizon
e7300d04bd MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17 20:07:52 +02:00