A relocatable kernel will relocate itself to pref_address if it is
loaded below pref_address. This means a booted kernel may be relocating
itself to an area with reserved memory on modern systems, potentially
clobbering arbitrary data that may be important to the system.
This is often the case, as the default value of PHYSICAL_START is
0x1000000 and kernels are typically loaded at 0x100000 or above by
bootloaders like iPXE or kexec. GRUB behaves like the approach
implemented here.
Also fixes the documentation around pref_address and PHYSICAL_START to
be accurate.
[ dhansen: changelog tweak ]
Co-developed-by: Cloud Hsu <cloudhsu@google.com>
Signed-off-by: Cloud Hsu <cloudhsu@google.com>
Signed-off-by: Chris Koch <chrisko@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: https://lore.kernel.org/all/20231215190521.3796022-1-chrisko%40google.com
-----BEGIN PGP SIGNATURE-----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=1EJI
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"This contains the initial support for host-side TDX support so that
KVM can run TDX-protected guests. This does not include the actual
KVM-side support which will come from the KVM folks. The TDX host
interactions with kexec also needs to be ironed out before this is
ready for prime time, so this code is currently Kconfig'd off when
kexec is on.
The majority of the code here is the kernel telling the TDX module
which memory to protect and handing some additional memory over to it
to use to store TDX module metadata. That sounds pretty simple, but
the TDX architecture is rather flexible and it takes quite a bit of
back-and-forth to say, "just protect all memory, please."
There is also some code tacked on near the end of the series to handle
a hardware erratum. The erratum can make software bugs such as a
kernel write to TDX-protected memory cause a machine check and
masquerade as a real hardware failure. The erratum handling watches
out for these and tries to provide nicer user errors"
* tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/virt/tdx: Make TDX host depend on X86_MCE
x86/virt/tdx: Disable TDX host support when kexec is enabled
Documentation/x86: Add documentation for TDX host support
x86/mce: Differentiate real hardware #MCs from TDX erratum ones
x86/cpu: Detect TDX partial write machine check erratum
x86/virt/tdx: Handle TDX interaction with sleep and hibernation
x86/virt/tdx: Initialize all TDMRs
x86/virt/tdx: Configure global KeyID on all packages
x86/virt/tdx: Configure TDX module with the TDMRs and global KeyID
x86/virt/tdx: Designate reserved areas for all TDMRs
x86/virt/tdx: Allocate and set up PAMTs for TDMRs
x86/virt/tdx: Fill out TDMRs to cover all TDX memory regions
x86/virt/tdx: Add placeholder to construct TDMRs to cover all TDX memory regions
x86/virt/tdx: Get module global metadata for module initialization
x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory
x86/virt/tdx: Add skeleton to enable TDX on demand
x86/virt/tdx: Add SEAMCALL error printing for module initialization
x86/virt/tdx: Handle SEAMCALL no entropy error in common code
x86/virt/tdx: Make INTEL_TDX_HOST depend on X86_X2APIC
x86/virt/tdx: Define TDX supported page sizes as macros
...
- The minimum Sphinx requirement has been raised to 2.4.4, following a
warning that was added in 6.2.
- Some reworking of the Documentation/process front page to, hopefully,
make it more useful.
- Various kernel-doc tweaks to, for example, make it deal properly with
__counted_by annotations.
- We have also restored a warning for documentation of nonexistent
structure members that disappeared a while back. That had the delightful
consequence of adding some 600 warnings to the docs build. A sustained
effort by Randy, Vegard, and myself has addressed almost all of those,
bringing the documentation back into sync with the code. The fixes are
going through the appropriate maintainer trees.
- Various improvements to the HTML rendered docs, including automatic links
to Git revisions and a nice new pulldown to make translations easy to
access.
- Speaking of translations, more of those for Spanish and Chinese.
...plus the usual stream of documentation updates and typo fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmWcRKMPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YTKIH/AxBt/3iWt40dPf18arZHLU6tdUbmg01ttef
CNKWkniCmABGKc//KYDXvjZMRDt0YlrS0KgUzrb8nIQTBlZG40D+88EwjXE0HeGP
xt1Fk7OPOiJEqBZ3HEe0PDVfOiA+4yR6CmDKklCJuKg77X9atklneBwPUw/cOASk
CWj+BdbwPBiSNQv48Lp87rGusKwnH/g0MN2uS0z9MPr1DYjM1K8+ngZjGW24lZHt
qs5yhP43mlZGBF/lwNJXQp/xhnKAqJ9XwylBX9Wmaoxaz9yyzNVsADGvROMudgzi
9YB+Jdy7Z0JSrVoLIRhUuDOv7aW8vk+8qLmGJt2aTIsqehbQ6pk=
=fCtT
-----END PGP SIGNATURE-----
Merge tag 'docs-6.8' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet:
"Another moderately busy cycle for documentation, including:
- The minimum Sphinx requirement has been raised to 2.4.4, following
a warning that was added in 6.2
- Some reworking of the Documentation/process front page to,
hopefully, make it more useful
- Various kernel-doc tweaks to, for example, make it deal properly
with __counted_by annotations
- We have also restored a warning for documentation of nonexistent
structure members that disappeared a while back. That had the
delightful consequence of adding some 600 warnings to the docs
build. A sustained effort by Randy, Vegard, and myself has
addressed almost all of those, bringing the documentation back into
sync with the code. The fixes are going through the appropriate
maintainer trees
- Various improvements to the HTML rendered docs, including automatic
links to Git revisions and a nice new pulldown to make translations
easy to access
- Speaking of translations, more of those for Spanish and Chinese
... plus the usual stream of documentation updates and typo fixes"
* tag 'docs-6.8' of git://git.lwn.net/linux: (57 commits)
MAINTAINERS: use tabs for indent of CONFIDENTIAL COMPUTING THREAT MODEL
A reworked process/index.rst
ring-buffer/Documentation: Add documentation on buffer_percent file
Translated the RISC-V architecture boot documentation.
Docs: remove mentions of fdformat from util-linux
Docs/zh_CN: Fix the meaning of DEBUG to pr_debug()
Documentation: move driver-api/dcdbas to userspace-api/
Documentation: move driver-api/isapnp to userspace-api/
Documentation/core-api : fix typo in workqueue
Documentation/trace: Fixed typos in the ftrace FLAGS section
kernel-doc: handle a void function without producing a warning
scripts/get_abi.pl: ignore some temp files
docs: kernel_abi.py: fix command injection
scripts/get_abi: fix source path leak
CREDITS, MAINTAINERS, docs/process/howto: Update man-pages' maintainer
docs: translations: add translations links when they exist
kernel-doc: Align quick help and the code
MAINTAINERS: add reviewer for Spanish translations
docs: ignore __counted_by attribute in structure definitions
scripts: kernel-doc: Clarify missing struct member description
..
The kernel-feat directive passes its argument straight to the shell.
This is unfortunate and unnecessary.
Let's always use paths relative to $srctree/Documentation/ and use
subprocess.check_call() instead of subprocess.Popen(shell=True).
This also makes the code shorter.
This is analogous to commit 3231dd5862 ("docs: kernel_abi.py: fix
command injection") where we did exactly the same thing for
kernel_abi.py, somehow I completely missed this one.
Link: https://fosstodon.org/@jani/111676532203641247
Reported-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240110174758.3680506-1-vegard.nossum@oracle.com
- A micro-optimization got misplaced as a cleanup:
- Micro-optimize the asm code in secondary_startup_64_no_verify()
- Change global variables to local
- Add missing kernel-doc function parameter descriptions
- Remove unused parameter from a macro
- Remove obsolete Kconfig entry
- Fix comments
- Fix typos, mostly scripted, manually reviewed
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=kUav
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
- Change global variables to local
- Add missing kernel-doc function parameter descriptions
- Remove unused parameter from a macro
- Remove obsolete Kconfig entry
- Fix comments
- Fix typos, mostly scripted, manually reviewed
and a micro-optimization got misplaced as a cleanup:
- Micro-optimize the asm code in secondary_startup_64_no_verify()
* tag 'x86-cleanups-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arch/x86: Fix typos
x86/head_64: Use TESTB instead of TESTL in secondary_startup_64_no_verify()
x86/docs: Remove reference to syscall trampoline in PTI
x86/Kconfig: Remove obsolete config X86_32_SMP
x86/io: Remove the unused 'bw' parameter from the BUILDIO() macro
x86/mtrr: Document missing function parameters in kernel-doc
x86/setup: Make relocated_ramdisk a local variable of relocate_initrd()
been disabled on the cmdline
- Clarify in detail how /proc/cpuinfo is used on x86
- Fix a theoretical overflow in num_digits()
-----BEGIN PGP SIGNATURE-----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=lzR+
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- Add an informational message which gets issued when IA32 emulation
has been disabled on the cmdline
- Clarify in detail how /proc/cpuinfo is used on x86
- Fix a theoretical overflow in num_digits()
* tag 'x86_misc_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ia32: State that IA32 emulation is disabled
Documentation/x86: Document what /proc/cpuinfo is for
x86/lib: Fix overflow when counting digits
Add documentation for TDX host kernel support. There is already one
file Documentation/x86/tdx.rst containing documentation for TDX guest
internals. Also reuse it for TDX host kernel support.
Introduce a new level menu "TDX Guest Support" and move existing
materials under it, and add a new menu for TDX host kernel support.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20231208170740.53979-19-dave.hansen%40intel.com
Commit
bf904d2762 ("x86/pti/64: Remove the SYSCALL64 entry trampoline")
removed the syscall trampoline and instead opted to enable using the
default SYSCALL64 entry point by mapping the percpu TSS. Unfortunately,
the PTI documentation wasn't updated when the respective changes were
made, so bring the doc up to speed.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231102130204.41043-1-nik.borisov@suse.com
This has been long overdue. Write down what x86's version of
/proc/cpuinfo is and should be used for.
With improvements by dhansen.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129101700.28482-1-bp@alien8.de
- Fix a back-to-back signals handling scenario when shadow stack is in
use
- A documentation fix
- Add Kirill as TDX maintainer
-----BEGIN PGP SIGNATURE-----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=PGYO
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Ignore invalid x2APIC entries in order to not waste per-CPU data
- Fix a back-to-back signals handling scenario when shadow stack is in
use
- A documentation fix
- Add Kirill as TDX maintainer
* tag 'x86_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acpi: Ignore invalid x2APIC entries
x86/shstk: Delay signal entry SSP write until after user accesses
x86/Documentation: Indent 'note::' directive for protocol version number note
MAINTAINERS: Add Intel TDX entry
There aren't a ton of references to commits in the documentation, but
they do exist, and we can use automarkup to linkify them to make them
easier to follow.
Use something like this to find references to commits:
git grep -P 'commit.*[0-9a-f]{8,}' Documentation/
Also fix a few of these to standardize on the exact format that is
already used in changelogs.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231027115420.205279-1-vegard.nossum@oracle.com
The protocol version number note is between the protocol version table and
the memory layout section. As such, Sphinx renders the note directive not
only on the actual note, but until the end of doc.
Indent the directive so that only the actual protocol version number
note is rendered as such.
Fixes: 2c33c27fd6 ("x86/boot: Introduce kernel_info")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231106101206.76487-2-bagasdotme@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Highlights:
- asus-wmi: Support for screenpad and solve brightness key
press duplication
- int3472: Eliminate the last use of deprecated GPIO functions
- mlxbf-pmc: New HW support
- msi-ec: Support new EC configurations
- thinkpad_acpi: Support reading aux MAC address during passthrough
- wmi: Fixes & improvements
- x86-android-tablets: Detection fix and avoid use of GPIO private APIs
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- Remove void function return
amd/hsmp:
- add support for metrics tbl
- create plat specific struct
- Fix iomem handling
- improve the error log
amd/pmc:
- Add dump_custom_stb module parameter
- Add PMFW command id to support S2D force flush
- Handle overflow cases where the num_samples range is higher
- Use flex array when calling amd_pmc_stb_debugfs_open_v2()
asus-wireless:
- Replace open coded acpi_match_acpi_device()
asus-wmi:
- add support for ASUS screenpad
- Do not report brightness up/down keys when also reported by acpi_video
gpiolib: acpi:
- Add a ignore interrupt quirk for Peaq C1010
- Check if a GPIO is listed in ignore_interrupt earlier
hp-bioscfg:
- Annotate struct bios_args with __counted_by
inspur-platform-profile:
- Add platform profile support
int3472:
- Add new skl_int3472_fill_gpiod_lookup() helper
- Add new skl_int3472_gpiod_get_from_temp_lookup() helper
- Stop using gpiod_toggle_active_low()
- Switch to devm_get_gpiod()
intel: bytcrc_pwrsrc:
- Convert to platform remove callback returning void
intel/ifs:
- Add new CPU support
- Add new error code
- ARRAY BIST for Sierra Forest
- Gen2 scan image loading
- Gen2 Scan test support
- Metadata validation for start_chunk
- Refactor image loading code
- Store IFS generation number
- Validate image size
intel_speed_select_if:
- Remove hardcoded map size
- Use devm_ioremap_resource
intel/tpmi:
- Add debugfs support for read/write blocked
- Add defines to get version information
intel-uncore-freq:
- Ignore minor version change
ISST:
- Allow level 0 to be not present
- Ignore minor version change
- Use fuse enabled mask instead of allowed levels
mellanox:
- Fix misspelling error in routine name
- Rename some init()/exit() functions for consistent naming
mlxbf-bootctl:
- Convert to platform remove callback returning void
mlxbf-pmc:
- Add support for BlueField-3
mlxbf-tmfifo:
- Convert to platform remove callback returning void
mlx-Convert to platform remove callback returning void:
- mlx-Convert to platform remove callback returning void
mlxreg-hotplug:
- Convert to platform remove callback returning void
mlxreg-io:
- Convert to platform remove callback returning void
mlxreg-lc:
- Convert to platform remove callback returning void
msi-ec:
- Add more EC configs
- rename fn_super_swap
nvsw-sn2201:
- Convert to platform remove callback returning void
sel3350-Convert to platform remove callback returning void:
- sel3350-Convert to platform remove callback returning void
siemens: simatic-ipc-batt-apollolake:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt-elkhartlake:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt-f7188x:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt:
- Simplify simatic_ipc_batt_remove()
surface: acpi-notify:
- Convert to platform remove callback returning void
surface: aggregator:
- Annotate struct ssam_event with __counted_by
surface: aggregator-cdev:
- Convert to platform remove callback returning void
surface: aggregator-registry:
- Convert to platform remove callback returning void
surface: dtx:
- Convert to platform remove callback returning void
surface: gpe:
- Convert to platform remove callback returning void
surface: hotplug:
- Convert to platform remove callback returning void
surface: surface3-wmi:
- Convert to platform remove callback returning void
think-lmi:
- Add bulk save feature
- Replace kstrdup() + strreplace() with kstrdup_and_replace()
- Use strreplace() to replace a character by nul
thinkpad_acpi:
- Add battery quirk for Thinkpad X120e
- replace deprecated strncpy with memcpy
- sysfs interface to auxmac
tools/power/x86/intel-speed-select:
- Display error for core-power support
- Increase max CPUs in one request
- No TRL for non compute domains
- Sanitize integer arguments
- turbo-mode enable disable swapped
- Update help for TRL
- Use cgroup isolate for CPU 0
- v1.18 release
wmi:
- Decouple probe deferring from wmi_block_list
- Decouple WMI device removal from wmi_block_list
- Fix opening of char device
- Fix probe failure when failing to register WMI devices
- Fix refcounting of WMI devices in legacy functions
x86-android-tablets:
- Add a comment about x86_android_tablet_get_gpiod()
- Create a platform_device from module_init()
- Drop "linux,power-supply-name" from lenovo_yt3_bq25892_0_props[]
- Fix Lenovo Yoga Tablet 2 830F/L vs 1050F/L detection
- Remove invalid_aei_gpiochip from Peaq C1010
- Remove invalid_aei_gpiochip support
- Stop using gpiolib private APIs
- Use platform-device as gpio-keys parent
xo15-ebook:
- Replace open coded acpi_match_acpi_device()
Merges:
- Merge branch 'pdx86/platform-drivers-x86-int3472' into review-ilpo
- Merge branch 'pdx86/platform-drivers-x86-mellanox-init' into review-ilpo
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-ilpo
- Merge remote-tracking branch 'pdx86/platform-drivers-x86-android-tablets' into review-hans
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZT+lBwAKCRBZrE9hU+XO
Mck0AQCFU7dYLCF4d1CXtHf1eZhSXLpYdhcO+C08JGGoM+MqSgD+Jyb9KJHk4pxE
FvKG51I9neyAne9lvNrLodHRzxCYgAo=
=duM8
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- asus-wmi: Support for screenpad and solve brightness key press
duplication
- int3472: Eliminate the last use of deprecated GPIO functions
- mlxbf-pmc: New HW support
- msi-ec: Support new EC configurations
- thinkpad_acpi: Support reading aux MAC address during passthrough
- wmi: Fixes & improvements
- x86-android-tablets: Detection fix and avoid use of GPIO private APIs
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: inspur-platform-profile: Add platform profile support
platform/x86: thinkpad_acpi: Add battery quirk for Thinkpad X120e
platform/x86: wmi: Decouple WMI device removal from wmi_block_list
platform/x86: wmi: Fix opening of char device
platform/x86: wmi: Fix probe failure when failing to register WMI devices
platform/x86: wmi: Fix refcounting of WMI devices in legacy functions
platform/x86: wmi: Decouple probe deferring from wmi_block_list
platform/x86/amd/hsmp: Fix iomem handling
platform/x86: asus-wmi: Do not report brightness up/down keys when also reported by acpi_video
platform/x86: thinkpad_acpi: replace deprecated strncpy with memcpy
tools/power/x86/intel-speed-select: v1.18 release
tools/power/x86/intel-speed-select: Use cgroup isolate for CPU 0
tools/power/x86/intel-speed-select: Increase max CPUs in one request
tools/power/x86/intel-speed-select: Display error for core-power support
tools/power/x86/intel-speed-select: No TRL for non compute domains
tools/power/x86/intel-speed-select: turbo-mode enable disable swapped
tools/power/x86/intel-speed-select: Update help for TRL
tools/power/x86/intel-speed-select: Sanitize integer arguments
platform/x86: acer-wmi: Remove void function return
platform/x86/amd/pmc: Add dump_custom_stb module parameter
...
- Limit the hardcoded topology quirk for Hygon CPUs to those which have a
model ID less than 4. The newer models have the topology CPUID leaf 0xB
correctly implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By chance
a XEN/PV boot ends up with smp_num_siblings == 2, which makes the
hotplug control stay at its default value "enabled". So the mask is
never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core to
deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or even
non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned long
or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die
IDs. That's really not the right place simply because cpuinfo is
subject to be reinitialized when a CPU goes through an offline/online
cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmU+yX0THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoROUD/4vlvKEcpm9rbI5DzLcaq4DFHKbyEZF
cQtzuOSM/9vTc9DHnuoNNLl9TWSYxiVYnejf3E21evfsqspYlzbTH8bId9XBCUid
6B68AJW842M2erNuwj0b0HwF1z++zpDmBDyhGOty/KQhoM8pYOHMvntAmbzJbuso
Dgx6BLVFcboTy6RwlfRa0EE8f9W5V+JbmG/VBDpdyCInal7VrudoVFZmWQnPIft7
zwOJpAoehkp8OKq7geKDf79yWxu9a1sNPd62HtaVEvfHwehHqE6OaMLss1us+0vT
SJ/D6gmRQBOwcXaZL0wL1dG7Km9Et4AisOvzhXGvTa5b2D5oljVoqJ7V7FTf5g3u
y3aqWbeUJzERUbeJt1HoGVAKyA4GtZOvg+TNIysf6F1Z4khl9alfa9jiqjj4g1au
zgItq/ZMBEBmJ7X4FxQUEUVBG2CDsEidyNBDRcimWQUDfBakV/iCs0suD8uu8ZOD
K5jMx8Hi2+xFx7r1YqsfsyMBYOf/zUZw65RbNe+kI992JbJ9nhcODbnbo5MlAsyv
vcqlK5FwXgZ4YAC8dZHU/tyTiqAW7oaOSkqKwTP5gcyNEqsjQHV//q6v+uqtjfYn
1C4oUsRHT2vJiV9ktNJTA4GQHIYF4geGgpG8Ih2SjXsSzdGtUd3DtX1iq0YiLEOk
eHhYsnniqsYB5g==
=xrz8
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Thomas Gleixner:
- Limit the hardcoded topology quirk for Hygon CPUs to those which have
a model ID less than 4.
The newer models have the topology CPUID leaf 0xB correctly
implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By
chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes
the hotplug control stay at its default value "enabled". So the mask
is never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core
to deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or
even non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned
long or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die IDs.
That's really not the right place simply because cpuinfo is subject
to be reinitialized when a CPU goes through an offline/online cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
* tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too
x86/cpu: Provide debug interface
x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids
x86/apic: Use u32 for wakeup_secondary_cpu[_64]()
x86/apic: Use u32 for [gs]et_apic_id()
x86/apic: Use u32 for phys_pkg_id()
x86/apic: Use u32 for cpu_present_to_apicid()
x86/apic: Use u32 for check_apicid_used()
x86/apic: Use u32 for APIC IDs in global data
x86/apic: Use BAD_APICID consistently
x86/cpu: Move cpu_l[l2]c_id into topology info
x86/cpu: Move logical package and die IDs into topology info
x86/cpu: Remove pointless evaluation of x86_coreid_bits
x86/cpu: Move cu_id into topology info
x86/cpu: Move cpu_core_id into topology info
hwmon: (fam15h_power) Use topology_core_id()
scsi: lpfc: Use topology_core_id()
x86/cpu: Move cpu_die_id into topology info
x86/cpu: Move phys_proc_id into topology info
x86/cpu: Encapsulate topology information in cpuinfo_x86
...
- Add new NX-stack self-test
- Improve NUMA partial-CFMWS handling
- Fix #VC handler bugs resulting in SEV-SNP boot failures
- Drop the 4MB memory size restriction on minimal NUMA nodes
- Reorganize headers a bit, in preparation to header dependency reduction efforts
- Misc cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tT5F
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm handling updates from Ingo Molnar:
- Add new NX-stack self-test
- Improve NUMA partial-CFMWS handling
- Fix #VC handler bugs resulting in SEV-SNP boot failures
- Drop the 4MB memory size restriction on minimal NUMA nodes
- Reorganize headers a bit, in preparation to header dependency
reduction efforts
- Misc cleanups & fixes
* tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Drop the 4 MB restriction on minimal NUMA node memory size
selftests/x86/lam: Zero out buffer for readlink()
x86/sev: Drop unneeded #include
x86/sev: Move sev_setup_arch() to mem_encrypt.c
x86/tdx: Replace deprecated strncpy() with strtomem_pad()
selftests/x86/mm: Add new test that userspace stack is in fact NX
x86/sev: Make boot_ghcb_page[] static
x86/boot: Move x86_cache_alignment initialization to correct spot
x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach
x86/sev-es: Allow copy_from_kernel_nofault() in earlier boot
x86_64: Show CR4.PSE on auxiliaries like on BSP
x86/iommu/docs: Update AMD IOMMU specification document URL
x86/sev/docs: Update document URL in amd-memory-encryption.rst
x86/mm: Move arch_memory_failure() and arch_is_platform_page() definitions from <asm/processor.h> to <asm/pgtable.h>
ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window
x86/numa: Introduce numa_fill_memblks()
In x86, hardware uses RMID to identify a monitoring group. When a user
creates a monitor group these details are not visible. These details
can help resctrl debugging.
Add RMID(mon_hw_id) to the monitor groups display in the resctrl interface.
Users can see these details when resctrl is mounted with "-o debug" option.
Add RFTYPE_MON_BASE that complements existing RFTYPE_CTRL_BASE and
represents files belonging to monitoring groups.
Other architectures do not use "RMID". Use the name mon_hw_id to refer
to "RMID" in an effort to keep the naming generic.
For example:
$cat /sys/fs/resctrl/mon_groups/mon_grp1/mon_hw_id
3
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-10-babu.moger@amd.com
In x86, hardware uses CLOSID to identify a control group. When a user
creates a control group this information is not visible to the user. It
can help resctrl debugging.
Add CLOSID(ctrl_hw_id) to the control groups display in the resctrl
interface. Users can see this detail when resctrl is mounted with the
"-o debug" option.
Other architectures do not use "CLOSID". Use the names ctrl_hw_id to refer
to "CLOSID" in an effort to keep the naming generic.
For example:
$cat /sys/fs/resctrl/ctrl_grp1/ctrl_hw_id
1
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-8-babu.moger@amd.com
Add "-o debug" option to mount resctrl filesystem in debug mode. When
in debug mode resctrl displays files that have the new RFTYPE_DEBUG flag
to help resctrl debugging.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-7-babu.moger@amd.com
The resctrl task assignment for monitor or control group needs to be
done one at a time. For example:
$mount -t resctrl resctrl /sys/fs/resctrl/
$mkdir /sys/fs/resctrl/ctrl_grp1
$echo 123 > /sys/fs/resctrl/ctrl_grp1/tasks
$echo 456 > /sys/fs/resctrl/ctrl_grp1/tasks
$echo 789 > /sys/fs/resctrl/ctrl_grp1/tasks
This is not user-friendly when dealing with hundreds of tasks.
Support multiple task assignment in one command with tasks ids separated
by commas. For example:
$echo 123,456,789 > /sys/fs/resctrl/ctrl_grp1/tasks
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Link: https://lore.kernel.org/r/20231017002308.134480-2-babu.moger@amd.com
AMD MI300 MCM provides GET_METRICS_TABLE message to retrieve
all the system management information from SMU.
The metrics table is made available as hexadecimal sysfs binary file
under per socket sysfs directory created at
/sys/devices/platform/amd_hsmp/socket%d/metrics_bin
Metrics table definitions will be documented as part of Public PPR.
The same is defined in the amd_hsmp.h header.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20231010120310.3464066-2-suma.hegde@amd.com
[ij: lseek -> lseek(), dram -> DRAM in dev_err()]
[ij: added period to terminate a documentation sentence]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The documentation mentions that non-contiguous bit masks are not
supported in Intel Cache Allocation Technology (CAT).
Update the documentation on how to determine if sparse bit masks are
allowed in L2 and L3 CAT.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Link: https://lore.kernel.org/r/3e9610997164f648e15c5c2e90d4944ce36504fe.1696934091.git.maciej.wieczor-retman@intel.com
The topology IDs which identify the LLC and L2 domains clearly belong to
the per CPU topology information.
Move them into cpuinfo_x86::cpuinfo_topo and get rid of the extra per CPU
data and the related exports.
This also paves the way to do proper topology evaluation during early boot
because it removes the only per CPU dependency for that.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.803864641@linutronix.de
Yet another topology related data pair. Rename logical_proc_id to
logical_pkg_id so it fits the common naming conventions.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.745139505@linutronix.de
Rename it to pkg_id which is the terminology used in the kernel.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.329006989@linutronix.de
Convert IBT selftest to asm to fix objtool warning
-----BEGIN PGP SIGNATURE-----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=3UUm
-----END PGP SIGNATURE-----
Merge tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 shadow stack support from Dave Hansen:
"This is the long awaited x86 shadow stack support, part of Intel's
Control-flow Enforcement Technology (CET).
CET consists of two related security features: shadow stacks and
indirect branch tracking. This series implements just the shadow stack
part of this feature, and just for userspace.
The main use case for shadow stack is providing protection against
return oriented programming attacks. It works by maintaining a
secondary (shadow) stack using a special memory type that has
protections against modification. When executing a CALL instruction,
the processor pushes the return address to both the normal stack and
to the special permission shadow stack. Upon RET, the processor pops
the shadow stack copy and compares it to the normal stack copy.
For more information, refer to the links below for the earlier
versions of this patch set"
Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/
Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/
* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/shstk: Change order of __user in type
x86/ibt: Convert IBT selftest to asm
x86/shstk: Don't retry vm_munmap() on -EINTR
x86/kbuild: Fix Documentation/ reference
x86/shstk: Move arch detail comment out of core mm
x86/shstk: Add ARCH_SHSTK_STATUS
x86/shstk: Add ARCH_SHSTK_UNLOCK
x86: Add PTRACE interface for shadow stack
selftests/x86: Add shadow stack test
x86/cpufeatures: Enable CET CR4 bit for shadow stack
x86/shstk: Wire in shadow stack interface
x86: Expose thread features in /proc/$PID/status
x86/shstk: Support WRSS for userspace
x86/shstk: Introduce map_shadow_stack syscall
x86/shstk: Check that signal frame is shadow stack mem
x86/shstk: Check that SSP is aligned on sigreturn
x86/shstk: Handle signals for shadow stack
x86/shstk: Introduce routines modifying shstk
x86/shstk: Handle thread shadow stack
x86/shstk: Add user-mode shadow stack support
...
- Work from Carlos Bilbao to integrate rustdoc output into the generated
HTML documentation. This took some work to figure out how to do it
without slowing the docs build and without creating people who don't have
Rust installed, but Carlos got there.
- Move the loongarch and mips architecture documentation under
Documentation/arch/.
- Some more maintainer documentation from Jakub
...plus the usual assortment of updates, translations, and fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmTvqNkPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YgIgH/3drfLtlFtzLqDOzrzDXS8yGnE3pPdxw796b
/ZFzAK16wYKaKevYoIz8bVGGKaE1sEUW0mhlq4KGdfZuxLG8YnWS8URyCW4FDU2E
6qNL+8oJ8LZfID46f9Q8ZgfEz7yF/mhCqPk7MEswYtwbscs2ZTGCTGYB/5BHlBuT
LR+M89uLmHgr8S1o24v30OgiX+VvQFyu0xoxIhbiqUZvBd/XdfX2pgYd9BGzMj5q
C2ZP+V14g36c5pV0EO9TwhCXOF/WVrp7DbjbfWAsqBSLxvpXPydH2q1DUzGeQtP1
exujrBD1O8q3pPdaNA5R+h6cWlHmUZug9mE4BRLp9ErGrozwJsQ=
=C3Uv
-----END PGP SIGNATURE-----
Merge tag 'docs-6.6' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
Now that the EFI entry code in assembler is only used by the optional
and deprecated EFI handover protocol, and given that the EFI stub C code
no longer returns to it, most of it can simply be dropped.
While at it, clarify the symbol naming, by merging efi_main() and
efi_stub_entry(), making the latter the shared entry point for all
different boot modes that enter via the EFI stub.
The efi32_stub_entry() and efi64_stub_entry() names are referenced
explicitly by the tooling that populates the setup header, so these must
be retained, but can be emitted as aliases of efi_stub_entry() where
appropriate.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-5-ardb@kernel.org
CRIU and GDB need to get the current shadow stack and WRSS enablement
status. This information is already available via /proc/pid/status, but
this is inconvenient for CRIU because it involves parsing the text output
in an area of the code where this is difficult. Provide a status
arch_prctl(), ARCH_SHSTK_STATUS for retrieving the status. Have arg2 be a
userspace address, and make the new arch_prctl simply copy the features
out to userspace.
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/20230613001108.3040476-43-rick.p.edgecombe%40intel.com
Userspace loaders may lock features before a CRIU restore operation has
the chance to set them to whatever state is required by the process
being restored. Allow a way for CRIU to unlock features. Add it as an
arch_prctl() like the other shadow stack operations, but restrict it being
called by the ptrace arch_pctl() interface.
[Merged into recent API changes, added commit log and docs]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/20230613001108.3040476-42-rick.p.edgecombe%40intel.com
Describe new support for moving MON groups to a new parent CTRL_MON
group and its restrictions.
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20230419125015.693566-4-peternewman@google.com
translation that has been ready for some time but got applied late.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmRT2nkACgkQF0NaE2wM
flglRwf/fLxKnCmh/j6zVjXVjb00UWj9NV5ZmrrnFxU+ajyzejoiKeyYvXcdiKKp
R1PpVJPF9ZO2DQ43QEj01SAl3qyMKWbvbISg5L/btOQtV563h7zktyjULOai7UfF
6+svqWi2Cl0gqdix3AVICZryRYBNBY62PeIWcWka+VXmMGCijwLf/jRRXwNa/7kf
kye9C5UG01uGauAw2t4Ol/jbIsZa4ID9FiUHJI/aQfLCgqVVO9pVQXA1igDF743Y
vt4IGX4qsjKGsAAOMWfieFGozcCwQsc01hC2usa8yx36ov6EBT79hmoWMWHsLeHJ
NcLfF7LZCJNUD3g+c1hLhfjjYMufaw==
=dljY
-----END PGP SIGNATURE-----
Merge tag 'docs-6.4-2' of git://git.lwn.net/linux
Pull more documentation updates from Jonathan Corbet:
"A handful of late-arriving documentation fixes, plus one Spanish
translation that has been ready for some time but got applied late"
* tag 'docs-6.4-2' of git://git.lwn.net/linux:
docs/sp_SP: Add translation of process/adding-syscalls
CREDITS: Update email address for Mat Martineau
Documentation: update kernel stack for x86_64
docs: Remove unnecessary unicode character
docs: fix "Reviewd" typo
Documentation: timers: hrtimers: Make hybrid union historical
docs/admin-guide/mm/ksm.rst fix intraface -> interface typo
doc:it_IT: fix some typos
Commit 6538b8ea88 ("x86_64: expand kernel stack to 16K")
expanded kernel stack for x86_64 but left the wrong documentation,
update it.
Signed-off-by: Yan Yan <yanyan.yan@antgroup.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Link: https://lore.kernel.org/r/20230328072537.20188-1-yanyan.yan@antgroup.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Including:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=OvTo
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
* Explicitly make some hardware constants part of the uabi
-----BEGIN PGP SIGNATURE-----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=GlmS
-----END PGP SIGNATURE-----
Merge tag 'x86_fpu_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Dave Hansen:
"There's no _actual_ kernel functionality here.
This expands the documentation around AMX support including some code
examples. The example code also exposed the fact that hardware
architecture constants as part of the ABI, but there's no easy place
that they get defined for apps. Adding them to a uabi header will
eventually make life easier for consumers of the ABI.
Summary:
- Improve AMX documentation along with example code
- Explicitly make some hardware constants part of the uabi"
* tag 'x86_fpu_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Explain the state component permission for guests
Documentation/x86: Add the AMX enabling example
x86/arch_prctl: Add AMX feature numbers as ABI constants
Documentation/x86: Explain the purpose for dynamic features
Move the x86 documentation under Documentation/arch/ as a way of cleaning
up the top-level directory and making the structure of our docs more
closely match the structure of the source directories it describes.
All in-kernel references to the old paths have been updated.
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-arch@vger.kernel.org
Cc: x86@kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20230315211523.108836-1-corbet@lwn.net/
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
