Add a .kunitconfig file, which provides a default, working config for
running the KCSAN tests. Note that it needs to run on an SMP machine, so
to run under kunit_tool, the --qemu_args option should be used (on a
supported architecture, like x86_64). For example:
./tools/testing/kunit/kunit.py run --arch=x86_64 --qemu_args='-smp 8'
--kunitconfig=kernel/kcsan
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It's possible that memory allocation for 'filtered' will fail, but for the
copy of the suite to succeed. In this case, the copy could be leaked.
Properly free 'copy' in the error case for the allocation of 'filtered'
failing.
Note that there may also have been a similar issue in
kunit_filter_subsuites, before it was removed in "kunit: flatten
kunit_suite*** to kunit_suite** in .kunit_test_suites".
This was reported by clang-analyzer via the kernel test robot, here:
https://lore.kernel.org/all/c8073b8e-7b9e-0830-4177-87c12f16349c@intel.com/
And by smatch via Dan Carpenter and the kernel test robot:
https://lore.kernel.org/all/202207101328.ASjx88yj-lkp@intel.com/
Fixes: a02353f491 ("kunit: bail out of test filtering logic quicker if OOM")
Reported-by: kernel test robot <yujie.liu@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
CONFIG_UML_PCI_OVER_VIRTIO=y is needed to enable CONFIG_PCI=y on UML.
However, this causes test failures when running the clk tests, i.e.
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk
A snippet of the particular error is:
> ok 1 - clk_gate_test_parent_rate
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 45 at lib/logic_iomem.c:141 __raw_readl+0x9f/0xd0
This is triggered by this cast in the test:
143 ctx->fake_mem = (void __force __iomem *)&ctx->fake_reg;
this seems to work except when logic iomem is enabled, i.e.
CONFIG_INDIRECT_IOMEM=y.
As a short-term fix, explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in
drivers/clk/.kunitconfig so we can enable it for everyone else by
default in kunit.py.
The long-term fix probably requires something more complicated, like
#ifdef CONFIG_INDIRECT_IOMEM
logic_iomem_add_region(...);
#endif
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reported-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kunit_test_suite() macro is no-longer incompatible with module_add,
so its use can be reinstated.
Since this fixes parsing with builtins and kunit_tool, also enable the
test by default when KUNIT_ALL_TESTS is enabled.
The test can now be run via kunit_tool with:
./tools/testing/kunit/kunit.py run --arch=x86_64 \
--kconfig_add CONFIG_OF=y --kconfig_add CONFIG_OF_ADDRESS=y \
--kconfig_add CONFIG_MMC=y --kconfig_add CONFIG_MMC_SDHCI=y \
--kconfig_add CONFIG_MMC_SDHCI_PLTFM=y \
--kconfig_add CONFIG_MMC_SDHCI_OF_ASPEED=y \
'sdhci-of-aspeed'
(It may be worth adding a .kunitconfig at some point, as there are
enough dependencies to make that command scarily long.)
Acked-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kunit_test_suite() macro previously conflicted with module_init,
making it unsuitable for use in the nitro_enclaves test. Now that it's
fixed, we can use it instead of a custom call into internal KUnit
functions to run the test.
As a side-effect, this means that the test results are properly included
with other suites when built-in. To celebrate, enable the test by
default when KUNIT_ALL_TESTS is set (and NITRO_ENCLAVES enabled).
The nitro_enclave tests can now be run via kunit_tool with:
./tools/testing/kunit/kunit.py run --arch=x86_64 \
--kconfig_add CONFIG_PCI=y --kconfig_add CONFIG_SMP=y \
--kconfig_add CONFIG_HOTPLUG_CPU=y \
--kconfig_add CONFIG_VIRT_DRIVERS=y \
--kconfig_add CONFIG_NITRO_ENCLAVES=y \
'ne_misc_dev_test'
(This is a pretty long command, so it may be worth adding a .kunitconfig
file at some point, instead.)
Reviewed-by: Andra Paraschiv <andraprs@amazon.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The new implementation of kunit_test_suite() for modules no longer
conflicts with module_init, so can now be used by the thunderbolt tests.
Also update the Kconfig entry to enable the test when KUNIT_ALL_TESTS is
enabled.
This means that kunit_tool can now successfully run and parse the test
results with, for example:
./tools/testing/kunit/kunit.py run --arch=x86_64 \
--kconfig_add CONFIG_PCI=y --kconfig_add CONFIG_USB4=y \
'thunderbolt'
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We currently store kunit suites in the .kunit_test_suites ELF section as
a `struct kunit_suite***` (modulo some `const`s).
For every test file, we store a struct kunit_suite** NULL-terminated array.
This adds quite a bit of complexity to the test filtering code in the
executor.
Instead, let's just make the .kunit_test_suites section contain a single
giant array of struct kunit_suite pointers, which can then be directly
manipulated. This array is not NULL-terminated, and so none of the test
filtering code needs to NULL-terminate anything.
Tested-by: Maíra Canal <maira.canal@usp.br>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, KUnit runs built-in tests and tests loaded from modules
differently. For built-in tests, the kunit_test_suite{,s}() macro adds a
list of suites in the .kunit_test_suites linker section. However, for
kernel modules, a module_init() function is used to run the test suites.
This causes problems if tests are included in a module which already
defines module_init/exit_module functions, as they'll conflict with the
kunit-provided ones.
This change removes the kunit-defined module inits, and instead parses
the kunit tests from their own section in the module. After module init,
we call __kunit_test_suites_init() on the contents of that section,
which prepares and runs the suite.
This essentially unifies the module- and non-module kunit init formats.
Tested-by: Maíra Canal <maira.canal@usp.br>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make any kselftest test module (using the kselftest_module framework)
taint the kernel with TAINT_TEST on module load.
Also mark the module as a test module using MODULE_INFO(test, "Y") so
that other tools can tell this is a test module. We can't rely solely
on this, though, as these test modules are also often built-in.
Finally, update the kselftest documentation to mention that the kernel
should be tainted, and how to do so manually (as below).
Note that several selftests use kernel modules which are not based on
the kselftest_module framework, and so will not automatically taint the
kernel.
This can be done in two ways:
- Moving the module to the tools/testing directory. All modules under
this directory will taint the kernel.
- Adding the 'test' module property with:
MODULE_INFO(test, "Y")
Similarly, selftests which do not load modules into the kernel generally
should not taint the kernel (or possibly should only do so on failure),
as it's assumed that testing from user-space should be safe. Regardless,
they can write to /proc/sys/kernel/tainted if required.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Taint the kernel with TAINT_TEST whenever a test module loads, by adding
a new "TEST" module property, and setting it for all modules in the
tools/testing directory. This property can also be set manually, for
tests which live outside the tools/testing directory with:
MODULE_INFO(test, "Y");
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Without the quoting, the example will mess up invocations like
$ run_kunit "Something with spaces"
Note: this example isn't valid, but if ever a usecase arises where a
flag argument might have spaces in it, it'll break.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The "Run Tests on qemu" section of run_wrapper.rst had a few issues left
over from the last big documentation refactor[1]:
- It referenced a non_uml.rst page, which was integrated into the other
pages (including run_wrapper.rst).
- It skimmed over the use of --arch= and --cross_compile= in favour of
using a custom --qemu_config. Since most users will want to use the
former, let's give examples.
Remove the reference to the non-existant page, and add a couple of
examples to encourage the use of --arch= and --cross_compile=.
With this change, there should be no more broken references in the KUnit
documentation (i.e., the one mentioned in [2] is gone).
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=46201d47d6c4be594c1d57b7f3251c371626a9c4
[2]: https://lore.kernel.org/linux-doc/cover.1656234456.git.mchehab@kernel.org/
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix this kernel-doc warning:
Documentation/dev-tools/kunit/api/test:9: ./include/kunit/test.h:323: WARNING: Inline interpreted text or phrase reference start-string without end-string.
Functions should use func_name() on kernel-doc markups, as
documented at:
Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There are several tests which depend on PCI, and hence need a bunch of
extra options to run under UML. This makes it awkward to give
configuration instructions (whether in documentation, or as part of a
.kunitconfig file), as two separate, incompatible sets of config options
are required for UML and "most other architectures".
For non-UML architectures, it's possible to add default kconfig options
via the qemu_config python files, but there's no equivalent for UML. Add
a new tools/testing/kunit/configs/arch_uml.config file containing extra
kconfig options to use on UML.
Tested-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It's come up a few times that it would be useful to have --kunitconfig
be repeatable [1][2].
This could be done before with a bit of shell-fu, e.g.
$ find fs/ -name '.kunitconfig' -exec cat {} + | \
./tools/testing/kunit/kunit.py run --kunitconfig=/dev/stdin
or equivalently:
$ cat fs/ext4/.kunitconfig fs/fat/.kunitconfig | \
./tools/testing/kunit/kunit.py run --kunitconfig=/dev/stdin
But this can be fairly clunky to use in practice.
And having explicit support in kunit.py opens the door to having more
config fragments of interest, e.g. options for PCI on UML [1], UML
coverage [2], variants of tests [3].
There's another argument to be made that users can just use multiple
--kconfig_add's, but this gets very clunky very fast (e.g. [2]).
Note: there's a big caveat here that some kconfig options might be
incompatible. We try to give a clearish error message in the simple case
where the same option appears multiple times with conflicting values,
but more subtle ones (e.g. mutually exclusive options) will be
potentially very confusing for the user. I don't know we can do better.
Note 2: if you want to combine a --kunitconfig with the default, you
either have to do to specify the current build_dir
> --kunitconfig=.kunit --kunitconfig=additional.config
or
> --kunitconfig=tools/testing/kunit/configs/default.config --kunitconifg=additional.config
each of which have their downsides (former depends on --build_dir,
doesn't work if you don't have a .kunitconfig yet), etc.
Example with conflicting values:
> $ ./tools/testing/kunit/kunit.py config --kunitconfig=lib/kunit --kunitconfig=/dev/stdin <<EOF
> CONFIG_KUNIT_TEST=n
> CONFIG_KUNIT=m
> EOF
> ...
> kunit_kernel.ConfigError: Multiple values specified for 2 options in kunitconfig:
> CONFIG_KUNIT=y
> vs from /dev/stdin
> CONFIG_KUNIT=m
>
> CONFIG_KUNIT_TEST=y
> vs from /dev/stdin
> # CONFIG_KUNIT_TEST is not set
[1] https://lists.freedesktop.org/archives/dri-devel/2022-June/357616.html
[2] https://lore.kernel.org/linux-kselftest/CAFd5g45f3X3xF2vz2BkTHRqOC4uW6GZxtUUMaP5mwwbK8uNVtA@mail.gmail.com/
[3] https://lore.kernel.org/linux-kselftest/CANpmjNOdSy6DuO6CYZ4UxhGxqhjzx4tn0sJMbRqo2xRFv9kX6Q@mail.gmail.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Now that kunit.py's --kunitconfig is repeatable, let's create a file to
hold the various options needed to enable coverage under UML.
This can be used like so:
$ ./tools/testing/kunit/kunit.py run \
--kunitconfig=tools/testing/kunit/configs/all_tests_uml.config \
--kunitconfig=tools/testing/kunit/configs/coverage_uml.config \
--make_options=CC=/usr/bin/gcc-6
which on my system is enough to get coverage working [1].
This is still a clunky command, but far better than before.
[1] at the time of this commit, I get:
Overall coverage rate:
lines......: 11.6% (34112 of 295033 lines)
functions..: 15.3% (3721 of 24368 functions)
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, you cannot ovewrwrite what's in your kunitconfig via
--kconfig_add.
Nor can you override something in a qemu_config via either means.
This patch makes it so we have this level of priority
* --kconfig_add
* kunitconfig file (the default or the one from --kunitconfig)
* qemu_config
The rationale for this order is that the more "dynamic" sources of
kconfig options should take priority.
--kconfig_add is obviously the most dynamic.
And for kunitconfig, users probably tweak the file manually or specify
--kunitconfig more often than they delve into qemu_config python files.
And internally, we convert the kconfigs from a python list into a set or
dict fairly often. We should just use a dict internally.
We exposed the set transform in the past since we didn't define __eq__,
so also take the chance to shore up the kunit_kconfig.Kconfig interface.
Example
=======
Let's consider the unrealistic example where someone would want to
disable CONFIG_KUNIT.
I.e. they run
$ ./tools/testing/kunit/kunit.py config --kconfig_add=CONFIG_KUNIT=n
Before
------
We'd write the following
> # CONFIG_KUNIT is not set
> CONFIG_KUNIT_ALL_TESTS=y
> CONFIG_KUNIT_TEST=y
> CONFIG_KUNIT=y
> CONFIG_KUNIT_EXAMPLE_TEST=y
And we'd error out with
> ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
> This is probably due to unsatisfied dependencies.
> Missing: # CONFIG_KUNIT is not set
After
-----
We'd write the following
> # CONFIG_KUNIT is not set
> CONFIG_KUNIT_TEST=y
> CONFIG_KUNIT_ALL_TESTS=y
> CONFIG_KUNIT_EXAMPLE_TEST=y
And we'd error out with
> ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
> This is probably due to unsatisfied dependencies.
> Missing: CONFIG_KUNIT_EXAMPLE_TEST=y, CONFIG_KUNIT_TEST=y, CONFIG_KUNIT_ALL_TESTS=y
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Example usage:
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 \
--kconfig_add=CONFIG_SMP=y --qemu_args='-smp 8'
Looking in the test.log, one can see
> smp: Bringing up secondary CPUs ...
> .... node #0, CPUs: #1#2#3#4#5#6#7
> smp: Brought up 1 node, 8 CPUs
This flag would allow people to make tweaks like this without having to
create custom qemu_config files.
For consistency with --kernel_args, we allow users to repeat this
argument, e.g. you can tack on a --qemu_args='-m 2048', or you could
just append it to the first string ('-smp 8 -m 2048').
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Drop get_source_tree_ops() and just call what used to be
get_source_tree_ops_from_qemu_config() in both cases.
Also rename the functions to have shorter names and add a "_" prefix to
note they're not meant to be used outside this function.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Context:
When using a non-UML arch, kunit.py will boot the test kernel with
options like these by default (this is x86_64):
> mem=1G console=tty kunit_shutdown=halt console=ttyS0 kunit_shutdown=reboot
The first three options are added unconditionally but are only intended
for UML.
1. 'mem=1G' is redundant with the '-m 1024' that we hard-code into the
qemu commandline.
2. We specify a 'console' for all tools/testing/kunit/qemu_configs/*.py
already, so 'console=tty' gets overwritten.
3. For QEMU, we need to use 'reboot', and for UML we need to use 'halt'.
If you switch them, kunit.py will hang until the --timeout expires.
This patch:
Having these duplicate options is a bit noisy.
Switch so we only add UML-specific options for UML.
I.e. we now get
UML: 'mem=1G console=tty kunit_shutdown=halt' (unchanged)
x86_64: 'console=ttyS0 kunit_shutdown=reboot'
Side effect: you can't overwrite these options on UML w/ --kernel_arg.
But you already couldn't for QEMU (console, kunit_shutdown), and why
would you want to?
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Context:
* kunit_kernel.py is importing kunit_parser.py just to use the
print_with_timestamp() function
* the parser is directly printing to stdout, which will become an issue
if we ever try to run multiple kernels in parallel
This patch introduces a kunit_printer.py file and migrates callers of
kunit_parser.print_with_timestamp() to call
kunit_printer.stdout.print_with_timestamp() instead.
Future changes:
If we want to support showing results for parallel runs, we could then
create new Printer's that don't directly write to stdout and refactor
the code to pass around these Printer objects.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Our main function currently has an optional `linux` argument which is
used to by our unit tests to inject a mock.
We currently have the same code copy-pasted several times to do
if not linux:
linux = MakeRealInstance(cli_args.foo, cli_args.bar, ...)
But in python, dependency injection isn't necessary or idiomatic when we
can just use mock.patch() to mock things out.
This change
1. adds a helper to create a LinuxSourceTree from the cli_args
2. drops the `linux` parameter in favor of mocking the __init__ func.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It's always set to true except in one test case.
And in that test case it can safely be set to true anyways.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kmemdup() is easier than kmalloc() + memcpy(), per lkp bot.
Also make the input `suite` as const since we're now always making
copies after commit a127b154a8 ("kunit: tool: allow filtering test
cases via glob").
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
With some of the stricter type checking in KUnit's EXPECT macros
removed, several casts in policy_unpack_test are no longer required.
Remove the unnecessary casts, making the conditions clearer.
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make KUnit trigger the new TAINT_TEST taint when any KUnit test is run.
Due to KUnit tests not being intended to run on production systems, and
potentially causing problems (or security issues like leaking kernel
addresses), the kernel's state should not be considered safe for
production use after KUnit tests are run.
This both marks KUnit modules as test modules using MODULE_INFO() and
manually taints the kernel when tests are run (which catches builtin
tests).
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Most in-kernel tests (such as KUnit tests) are not supposed to run on
production systems: they may do deliberately illegal things to trigger
errors, and have security implications (for example, KUnit assertions
will often deliberately leak kernel addresses).
Add a new taint type, TAINT_TEST to signal that a test has been run.
This will be printed as 'N' (originally for kuNit, as every other
sensible letter was taken.)
This should discourage people from running these tests on production
systems, and to make it easier to tell if tests have been run
accidentally (by loading the wrong configuration, etc.)
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYpz/IQAKCRBZ7Krx/gZQ
666mAPwKOC/voemjl2m+RpSruxAbdlRvKei3IY8YxLfyv+rmUQD9HKLJJtQX2VRF
QTFmQ3p7kx30ydwSbyY8Kpw3VMCDxgs=
=1ZKm
-----END PGP SIGNATURE-----
Merge tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull file descriptor fix from Al Viro:
"Fix for breakage in #work.fd this window"
* tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix the breakage in close_fd_get_file() calling conventions change
- fixes for material merged during this merge window
- cc:stable fixes for more longstanding issues
- minor mailmap and MAINTAINERS updates
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYpz1+QAKCRDdBJ7gKXxA
jrudAP9EvjTg4KhmXDoUpgJYc2oPg27nIhu1LWT8VFdsVQ6mPwEA//HPvPhjah8u
C1M183VxKL9trZf22DBn2BbD3kBDIAo=
=9LgC
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm hotfixes from Andrew Morton:
"Fixups for various recently-added and longer-term issues and a few
minor tweaks:
- fixes for material merged during this merge window
- cc:stable fixes for more longstanding issues
- minor mailmap and MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery
x86/kexec: fix memory leak of elf header buffer
mm/memremap: fix missing call to untrack_pfn() in pagemap_range()
mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock()
mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON
MAINTAINERS: add maintainer information for z3fold
mailmap: update Josh Poimboeuf's email
because,unusually, it has dependencies on both the mm-stable and
mm-nonmm-stable queues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYpz3SAAKCRDdBJ7gKXxA
jou6AP9bY89NifR7Tc8U59Xu4c9amphXS9rTJv7Ysj3GxBMoRwEAuXvvJTet6mEn
UdmytDdb4BtAlx7Itd7IKu4S9JD6mQw=
=bAU1
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull delay-accounting update from Andrew Morton:
"A single featurette for delay accounting.
Delayed a bit because, unusually, it had dependencies on both the
mm-stable and mm-nonmm-stable queues"
* tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
delayacct: track delays from write-protect copy
The bluetooth code uses our bitmap infrastructure for the two bits (!)
of connection setup flags, and in the process causes odd problems when
it converts between a bitmap and just the regular values of said bits.
It's completely pointless to do things like bitmap_to_arr32() to convert
a bitmap into a u32. It shoudln't have been a bitmap in the first
place. The reason to use bitmaps is if you have arbitrary number of
bits you want to manage (not two!), or if you rely on the atomicity
guarantees of the bitmap setting and clearing.
The code could use an "atomic_t" and use "atomic_or/andnot()" to set and
clear the bit values, but considering that it then copies the bitmaps
around with "bitmap_to_arr32()" and friends, there clearly cannot be a
lot of atomicity requirements.
So just use a regular integer.
In the process, this avoids the warnings about erroneous use of
bitmap_from_u64() which were triggered on 32-bit architectures when
conversion from a u64 would access two words (and, surprise, surprise,
only one word is needed - and indeed overkill - for a 2-bit bitmap).
That was always problematic, but the compiler seems to notice it and
warn about the invalid pattern only after commit 0a97953fd2 ("lib: add
bitmap_{from,to}_arr64") changed the exact implementation details of
'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell.
Fixes: fe92ee6425 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/
Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/
Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It used to grab an extra reference to struct file rather than
just transferring to caller the one it had removed from descriptor
table. New variant doesn't, and callers need to be adjusted.
Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com
Fixes: 6319194ec5 ("Unify the primitives for file descriptor closing")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
SGX enclave is accounted to the wrong memory control group.
-----BEGIN PGP SIGNATURE-----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=cuLD
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX fix from Thomas Gleixner:
"A single fix for x86/SGX to prevent that memory which is allocated for
an SGX enclave is accounted to the wrong memory control group"
* tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Set active memcg prior to shmem allocation
-----BEGIN PGP SIGNATURE-----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=KN22
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm cleanup from Thomas Gleixner:
"Use PAGE_ALIGNED() instead of open coding it in the x86/mm code"
* tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)
- Disable late microcode loading by default. Unless the HW people get
their act together and provide a required minimum version in the
microcode header for making a halfways informed decision its just
lottery and broken.
- Warn and taint the kernel when microcode is loaded late
- Remove the old unused microcode loader interface
- Remove a redundant perf callback from the microcode loader
-----BEGIN PGP SIGNATURE-----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=DQjr
-----END PGP SIGNATURE-----
Merge tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode updates from Thomas Gleixner:
- Disable late microcode loading by default. Unless the HW people get
their act together and provide a required minimum version in the
microcode header for making a halfways informed decision its just
lottery and broken.
- Warn and taint the kernel when microcode is loaded late
- Remove the old unused microcode loader interface
- Remove a redundant perf callback from the microcode loader
* tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Remove unnecessary perf callback
x86/microcode: Taint and warn on late loading
x86/microcode: Default-disable late loading
x86/microcode: Rip out the OLD_INTERFACE
- Remove unused headers in the IDT code
- Kconfig indendation and comment fixes
- Fix all 'the the' typos in one go instead of waiting for bots to fix
one at a time.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmKcdUsTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYofu/EACJEYM67sgOGX/OPxSI2QrcqIPajI/u
EMrNi69jR8XBgFUwnYRLC+eoC7nvYdpTaUHzQklS2xhE8lcZ4PcMejy9nHECe8MI
sYA38gXeGamM4pzFQgpsX0Eoq1OX3iH165dCnSgRfGg2Zv6YovmcGk2fkHtA0fXn
Sqp5fy33wK2U+ghY5MrJwVQ2SshbDp4p7SJ80iLCfdHvtKzQi02EH4CjrZ/guoJL
bjdiWXA+eIDrPXhoPiBkFQ3cG/vHPc/oj2SEAnBV5oC+hdgjFebiz6CNYbFw0QI9
MnJQlvhu/oe66J6sRGfqPABm4yh4omNSbjNjbWr9ahoVPvprH9gJ2EMBx6qOT3pe
sG6pluiQAZXBoOpRqR45vws4Ypq5onyv4OwMzEFNZVT9kzr1qrMJtsXIlffM/hHE
zgygCV1nqWznUueZKcI6XkXVtawte9wfpujDuZhCgoD/UaIixulW8zpK/0h9iUI5
03u0lXse20h7kEmJYZ+vgQwSci/6i10U1X7+VngIrBAt24gtzigdKd6FLljSPp0y
GOc9c79qNdm0Ayofko/m+XtwXw8UJ2Pbtkvku8qmyUR3ffUlBD+qcTPIZ6TZ8aPb
w17k64zxEMQRYlMm8uHRg8KVJXuWD8nO3BSzwpwPVyckpsL4CkEcgdij7HMN7dLO
+GCpzbvafupD6Q==
=vSDr
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Thomas Gleixner:
"A set of small x86 cleanups:
- Remove unused headers in the IDT code
- Kconfig indendation and comment fixes
- Fix all 'the the' typos in one go instead of waiting for bots to
fix one at a time"
* tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix all occurences of the "the the" typo
x86/idt: Remove unused headers
x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug
x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig
-----BEGIN PGP SIGNATURE-----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=gNpf
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot update from Thomas Gleixner:
"Use strlcpy() instead of strscpy() in arch_setup()"
* tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/setup: Use strscpy() to replace deprecated strlcpy()
- Device tree bindings for MT8186
- Tell the kernel that the RISC-V SBI timer stops in deeper power states
- Make device tree parsing in sp804 more robust
- Dead code removal and tiny fixes here and there
- Add the missing SPDX identifiers
-----BEGIN PGP SIGNATURE-----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=fIlH
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clockevent/clocksource updates from Thomas Gleixner:
- Device tree bindings for MT8186
- Tell the kernel that the RISC-V SBI timer stops in deeper power
states
- Make device tree parsing in sp804 more robust
- Dead code removal and tiny fixes here and there
- Add the missing SPDX identifiers
* tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check
clocksource/drivers/timer-sun5i: Convert to SPDX identifier
clocksource/drivers/timer-sun4i: Convert to SPDX identifier
clocksource/drivers/pistachio: Convert to SPDX identifier
clocksource/drivers/orion: Convert to SPDX identifier
clocksource/drivers/lpc32xx: Convert to SPDX identifier
clocksource/drivers/digicolor: Convert to SPDX identifier
clocksource/drivers/armada-370-xp: Convert to SPDX identifier
clocksource/drivers/mips-gic-timer: Convert to SPDX identifier
clocksource/drivers/jcore: Convert to SPDX identifier
clocksource/drivers/bcm_kona: Convert to SPDX identifier
clocksource/drivers/sp804: Avoid error on multiple instances
clocksource/drivers/riscv: Events are stopped during CPU suspend
clocksource/drivers/ixp4xx: Drop boardfile probe path
dt-bindings: timer: Add compatible for Mediatek MT8186
-----BEGIN PGP SIGNATURE-----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=arj3
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"Fix the fallout of sysctl code move which placed the init function
wrong"
* tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/autogroup: Fix sysctl move
- Make the ICL event constraints match reality
- Remove a unused local variable
-----BEGIN PGP SIGNATURE-----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=ZK+2
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
- Make the ICL event constraints match reality
- Remove a unused local variable
* tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Remove unused local variable
perf/x86/intel: Fix event constraints for ICL
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn.
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent escape
from non-instrumentable regions.
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions.
- Mark a few tiny inline as __always_inline to prevent GCC from bringing
them out of line and instrumenting them.
- Mark the empty stub context_tracking_enabled() as always inline as GCC
brings them out of line and instruments the empty shell.
- Annotate ex_handler_msr_mce() as dead end
-----BEGIN PGP SIGNATURE-----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=eNVp
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent
escape from non-instrumentable regions
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions
- Mark a few tiny inline as __always_inline to prevent GCC from
bringing them out of line and instrumenting them
- Mark the empty stub context_tracking_enabled() as always inline as
GCC brings them out of line and instruments the empty shell
- Annotate ex_handler_msr_mce() as dead end
* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Annotate ex_handler_msr_mce() as a dead end
context_tracking: Always inline empty stubs
x86: Always inline on_thread_stack() and current_top_of_stack()
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
x86/cpu: Elide KCSAN for cpu_has() and friends
objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
Mostly small bug fixes plus other trivial updates. The major change
of note is moving ufs out of scsi and a minor update to lpfc vmid
handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYptvayYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishb1rAPwJWSl1
kB9Qt1xPa1JK0Z7To2LRkrQ4uxYbAnpTLEP6UgEA3YuBccXRppcYQe5CXCrcZryz
BtTbtI3ApiV40xC/SRk=
=Uit3
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes plus other trivial updates.
The major change of note is moving ufs out of scsi and a minor update
to lpfc vmid handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
scsi: mpi3mr: Fix kernel-doc
scsi: lpfc: Add support for ATTO Fibre Channel devices
scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
scsi: sd_zbc: Prevent zone information memory leak
scsi: sd: Fix potential NULL pointer dereference
scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
scsi: myrb: Fix up null pointer access on myrb_cleanup()
scsi: core: Unexport scsi_bus_type
scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
scsi: ufs: ufshcd: Delete unnecessary NULL check
scsi: isci: Fix typo in comment
scsi: pmcraid: Fix typo in comment
scsi: smartpqi: Fix typo in comment
scsi: qedf: Fix typo in comment
scsi: esas2r: Fix typo in comment
scsi: storvsc: Fix typo in comment
scsi: ufs: Split the drivers/scsi/ufs directory
scsi: qla1280: Remove redundant variable
...
This contains the new HTE subsystem that has been in the works for a
couple of months now. The infrastructure provided allows for drivers to
register as hardware timestamp providers, while consumers will be able
to request events that they are interested in (such as GPIOs and IRQs)
to be timestamped by the hardware providers.
Note that this currently supports only one provider, but there seems to
be enough interest in this functionality and we expect to see more
drivers added once this is merged.
-----BEGIN PGP SIGNATURE-----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=sOJn
-----END PGP SIGNATURE-----
Merge tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux
Pull hardware timestamping subsystem from Thierry Reding:
"This contains the new HTE (hardware timestamping engine) subsystem
that has been in the works for a couple of months now.
The infrastructure provided allows for drivers to register as hardware
timestamp providers, while consumers will be able to request events
that they are interested in (such as GPIOs and IRQs) to be timestamped
by the hardware providers.
Note that this currently supports only one provider, but there seems
to be enough interest in this functionality and we expect to see more
drivers added once this is merged"
[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
platforms as another future timestamp provider ]
* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: timestamp: Correct id path
dt-bindings: Renamed hte directory to timestamp
hte: Uninitialized variable in hte_ts_get()
hte: Fix off by one in hte_push_ts_ns()
hte: Fix possible use-after-free in tegra_hte_test_remove()
hte: Remove unused including <linux/version.h>
MAINTAINERS: Add HTE Subsystem
hte: Add Tegra HTE test driver
tools: gpio: Add new hardware clock type
gpiolib: cdev: Add hardware timestamp clock type
gpio: tegra186: Add HTE support
gpiolib: Add HTE support
dt-bindings: Add HTE bindings
hte: Add Tegra194 HTE kernel provider
drivers: Add hardware timestamp engine (HTE) subsystem
Documentation: Add HTE subsystem guide
- Fix build regressions for parisc, csky, nios2, openrisc
- Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT
- Remove arch/parisc/nm, which was presumably a workaround for old tools
- Check the odd combination of EXPORT_SYMBOL and 'static' precisely
- Make external module builds robust against "too long argument error"
- Support j, k keys for moving the cursor in nconfig
-----BEGIN PGP SIGNATURE-----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=BaLT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Fix build regressions for parisc, csky, nios2, openrisc
- Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT
- Remove arch/parisc/nm, which was presumably a workaround for old
tools
- Check the odd combination of EXPORT_SYMBOL and 'static' precisely
- Make external module builds robust against "too long argument error"
- Support j, k keys for moving the cursor in nconfig
* tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: Allow to select bash in a modified environment
scripts: kconfig: nconf: make nconfig accept jk keybindings
modpost: use fnmatch() to simplify match()
modpost: simplify mod->name allocation
kbuild: factor out the common objtool arguments
kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
kbuild: clean .tmp_* pattern by make clean
kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
kbuild: rebuild multi-object modules when objtool is updated
kbuild: add cmd_and_savecmd macro
kbuild: make *.mod rule robust against too long argument error
kbuild: make built-in.a rule robust against too long argument error
kbuild: check static EXPORT_SYMBOL* by script instead of modpost
parisc: remove arch/parisc/nm
kbuild: do not create *.prelink.o for Clang LTO or IBT
kbuild: replace $(linked-object) with CONFIG options
kbuild: do not try to parse *.cmd files for objects provided by compiler
kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
modpost: squash if...else-if in find_elf_symbol2()
modpost: reuse ARRAY_SIZE() macro for section_mismatch()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYpvrrgAKCRBZ7Krx/gZQ
6+eZAP9r0c8E1UnUxRI32kQrzndJO2z9mKq6rI9D7GgJe+MtogEAlfynzklqbHzo
fFvczeD0tzLu4aDExtGn6GNGf5gSpw4=
=1blQ
-----END PGP SIGNATURE-----
Merge tag 'pull-18-rc1-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pathname updates from Al Viro:
"Several cleanups in fs/namei.c"
* tag 'pull-18-rc1-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
namei: cleanup double word in comment
get rid of dead code in legitimize_root()
fs/namei.c:reserve_stack(): tidy up the call of try_to_unlazy()
The fix is usermode_driver.c one - once you've done kern_mount(), you
must kern_unmount(); simple mntput() will end up with a leak. Several
failure exits in there messed up that way... In practice you won't
hit those particular failure exits without fault injection, though.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYpvrWQAKCRBZ7Krx/gZQ
6z29AP9EZVSyIvnwXleehpa2mEZhsp+KAKgV/ENaKHMn7jiH0wD/bfgnhxIDNuc5
108E2R5RWEYTynW5k7nnP5PsTsMq5Qc=
=b3Wc
-----END PGP SIGNATURE-----
Merge tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount handling updates from Al Viro:
"Cleanups (and one fix) around struct mount handling.
The fix is usermode_driver.c one - once you've done kern_mount(), you
must kern_unmount(); simple mntput() will end up with a leak. Several
failure exits in there messed up that way... In practice you won't hit
those particular failure exits without fault injection, though"
* tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move mount-related externs from fs.h to mount.h
blob_to_mnt(): kern_unmount() is needed to undo kern_mount()
m->mnt_root->d_inode->i_sb is a weird way to spell m->mnt_sb...
linux/mount.h: trim includes
uninline may_mount() and don't opencode it in fspick(2)/fsopen(2)
-----BEGIN PGP SIGNATURE-----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=Jhdy
-----END PGP SIGNATURE-----
Merge tag '5.19-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Nine cifs/smb3 client fixes.
Includes DFS fixes, some cleanup of leagcy SMB1 code, duplicated
message cleanup and a double free and deadlock fix"
* tag '5.19-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix uninitialized pointer in error case in dfs_cache_get_tgt_share
cifs: skip trailing separators of prefix paths
cifs: update internal module number
cifs: version operations for smb20 unneeded when legacy support disabled
cifs: do not build smb1ops if legacy support is disabled
cifs: fix potential deadlock in direct reclaim
cifs: when extending a file with falloc we should make files not-sparse
cifs: remove repeated debug message on cifs_put_smb_ses()
cifs: fix potential double free during failed mount
