Commit Graph

203 Commits

Author SHA1 Message Date
Sven Wegener
6af4f55c31 leds: Add leds-wrap default-trigger
The power led is normally lit after boot, let's use the default-on
trigger as the default trigger for it.  This gets the initial brightness
value right and being on is the default behaviour we expect for a power
led.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-20 22:36:03 +01:00
Rodolfo Giometti
132e9306be leds: Add backlight LED trigger
This allows LEDs to be controlled as a backlight device where
they turn off and on when the display is blanked and unblanked.
This is useful where you need various key backlight LEDs to
dim at the same time as the backlight.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-20 22:34:12 +01:00
Mike Rapoport
9e84561c8c leds: da903x: Add support for LEDs found on DA9030/DA9034
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-20 22:34:11 +01:00
Linus Torvalds
72558dde73 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (36 commits)
  ide: re-add TRM290 fix lost during ide_build_dmatable() cleanup
  scc_pata: kill unused variables
  sgiioc4: kill duplicate ioremap()
  sgiioc4: kill useless address checks
  delkin_cb: add PM support
  ide: remove broken hpt34x driver
  ide-floppy: remove idefloppy_floppy_t typedef
  sgiioc4: remove maskproc() method
  hpt366: cleanup maskproc() method
  ide: mask interrupt in ide_config_drive_speed()
  hpt366: fix compile warning
  ide: remove unused macros from <asm-parisc/ide.h>
  ide: remove M68K_IDE_SWAPW define from <asm-m68k/ide.h>
  ide: remove dead <asm-arm/arch-sa1100/ide.h>
  ide: fix support for IDE PCI controllers using MMIO on frv
  ide-cd: remove stale comment
  ide-cd: small drive type print fix
  ide-cd: debug log enhancements
  ide: add generic ATA/ATAPI disk driver
  ide: allow device drivers to specify per-device type /proc settings
  ...
2008-10-20 13:12:39 -07:00
Paul Mundt
7639a4541f sh: Migrate common board headers to mach-common/.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 13:02:48 +09:00
Bartlomiej Zolnierkiewicz
806f80a6fc ide: add generic ATA/ATAPI disk driver
* Add struct ide_disk_ops containing protocol specific methods.

* Add 'struct ide_disk_ops *' to ide_drive_t.

* Convert ide-{disk,floppy} drivers to use struct ide_disk_ops.

* Merge ide-{disk,floppy} drivers into generic ide-gd driver.

While at it:
- ide_disk_init_capacity() -> ide_disk_get_capacity()

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:14 +02:00
Greg Kroah-Hartman
a9b12619f7 device create: misc: convert device_create_drvdata to device_create
Now that device_create() has been audited, rename things back to the
original call to be sane.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:43 -07:00
David S. Miller
56c5d900db Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	sound/core/memalloc.c
2008-10-11 12:39:35 -07:00
Linus Torvalds
7cc4e87f91 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits)
  [ARM] 5300/1: fixup spitz reset during boot
  [ARM] 5295/1: make ZONE_DMA optional
  [ARM] 5239/1: Palm Zire 72 power management support
  [ARM] 5298/1: Drop desc_handle_irq()
  [ARM] 5297/1: [KS8695] Fix two compile-time warnings
  [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores.
  [ARM] pxa: allow multi-machine PCMCIA builds
  [ARM] pxa: add preliminary CPUFREQ support for PXA3xx
  [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h
  [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c
  [ARM] pxa/zylonite: add support for USB OHCI
  [ARM] ohci-pxa27x: use ioremap() and offset for register access
  [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph()
  [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource
  [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver
  [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
  [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c
  [ARM] pxa: simplify DMA register definitions
  [ARM] pxa: make additional DCSR bits valid for PXA3xx
  [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c
  ...

Fixed up conflicts in
	arch/arm/mach-versatile/core.c
	sound/soc/pxa/pxa2xx-ac97.c
	sound/soc/pxa/pxa2xx-i2s.c
manually.
2008-10-11 10:09:45 -07:00
Sven Wegener
95bf14bff5 leds-pca955x: add proper error handling and fix bogus memory handling
Check the return value of led_classdev_register and unregister all
registered devices, if registering one device fails.  Also the dynamic
memory handling is totally bogus.  You can't allocate multiple chunks via
kzalloc() and expect them to be in order later.  I wonder how this ever
worked.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Acked-by: Nate Case <ncase@xes-inc.com>
Tested-by: Nate Case <ncase@xes-inc.com>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-03 18:22:18 -07:00
Sven Wegener
07f696c777 leds-fsg: change order of initialization and deinitialization
On initialization, we first do the ioremap and then register the led devices.
On deinitialization, we do it in reverse order. This prevents someone calling
into the brightness_set functions with an invalid latch_address.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Acked-by: Rod Whitby <rod@whitby.id.au>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-03 18:22:18 -07:00
Eric Miao
4fe3224fff [ARM] pxa/spitz: use leds-gpio for led driving and drop leds-spitz
Now as the scoop pins are covered by the generic gpio API,
we can use leds-gpio driver instead of special leds-spitz

Drop leds-spitz.c and the declarations of now un-referenced
spitzscoop_device, spitzscoop2_device.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23 22:04:40 +01:00
Eric Miao
60cf711d47 [ARM] pxa/corgi: use leds-gpio for led driving and drop leds-corgi
Now as the scoop pins are covered by the generic gpio API,
we can use leds-gpio driver instead of special leds-corgi

Drop leds-corgi.c and remove the declaration of now un-referenced
corgiscoop_device.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23 22:04:39 +01:00
David S. Miller
5843492ccc leds: Add driver for Sunfire UltraSPARC server LEDs.
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-31 20:26:48 -07:00
Russell King
a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Russell King
be50972935 [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:08 +01:00
Russell King
0f8469a54f [ARM] Eliminate useless includes of asm/mach-types.h
There are 43 includes of asm/mach-types.h by files that don't
reference anything from that file.  Remove these unnecessary
includes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:04 +01:00
Dmitry Baryshkov
fe3025b55c leds: Ensure led->trigger is set earlier
Make sure led->trigger is valid before calling trigger->activate

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-07-23 09:49:56 +01:00
Nate Case
f46e9203d9 leds: Add support for Philips PCA955x I2C LED drivers
This driver supports the PCA9550, PCA9551, PCA9552, and PCA9553
LED driver chips.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-07-23 09:49:56 +01:00
Ben Dooks
dd1160dc18 leds: Fix sparse warnings in leds-h1940 driver
Fixes the following sparse errors:
drivers/leds/leds-h1940.c:26:6: warning: symbol 'h1940_greenled_set' was not declared. Should it be static?
drivers/leds/leds-h1940.c:55:6: warning: symbol 'h1940_redled_set' was not declared. Should it be static?
drivers/leds/leds-h1940.c:85:6: warning: symbol 'h1940_blueled_set' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-07-23 09:49:56 +01:00
Li Zefan
e49575f46c leds: fix unsigned value overflow in atmel pwm driver
Fix an unsigned value overflow in the error handling code in the
Atmel PWM driver.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-07-23 09:49:56 +01:00
Riku Voipio
e14fa82439 leds: Add pca9532 led driver
NXP pca9532 is a LED dimmer/controller attached to i2c bus.  It allows
attaching upto 16 leds which can either be on, off or dimmed and/or blinked
with the two PWM modulators available.

This driver is a "new-style" i2c driver that adheres to the driver model and
implements the led framework api.  Since the leds connected to the driver are
platform specific, it is only useful when platform data is passed to the
driver to define what leds are connected to which pins.

Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-07-23 09:49:56 +01:00
Greg Kroah-Hartman
0b00fc5851 LEDS: fix race in device_create
There is a race from when a device is created with device_create() and
then the drvdata is set with a call to dev_set_drvdata() in which a
sysfs file could be open, yet the drvdata will be NULL, causing all
sorts of bad things to happen.

This patch fixes the problem by using the new function,
device_create_drvdata().

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-20 13:31:55 -07:00
Hirofumi Nakagawa
801678c5a3 Remove duplicated unlikely() in IS_ERR()
Some drivers have duplicated unlikely() macros.  IS_ERR() already has
unlikely() in itself.

This patch cleans up such pointless code.

Signed-off-by: Hirofumi Nakagawa <hnakagawa@miraclelinux.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:25 -07:00
Nick Forbes
060856c799 leds: Add default-on trigger
Add a trigger which allows LEDs to default to the full
brightness state.

Signed-off-by: Nick Forbes <Nick.Forbes@huntsworth.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-25 00:06:52 +01:00
Rod Whitby
3b2e46f8c4 leds: Add new driver for the LEDs on the Freecom FSG-3
The LEDs on the Freecom FSG-3 are connected to an external
memory-mapped latch on the ixp4xx expansion bus, and therefore cannot
be supported by any of the existing LEDs drivers.

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24 23:43:09 +01:00
Henrique de Moraes Holschuh
29d76dfa29 leds: Add support to leds with readable status
Some led hardware allows drivers to query the led state, and this patch
adds a hook to let the led class take advantage of that information when
available.

Without this functionality, when access to the led hardware is not
exclusive (i.e. firmware or hardware might change its state behind the
kernel's back), reality goes out of sync with the led class' idea of what
the led is doing, which is annoying at best.

Behaviour for drivers that do not or cannot read the led status is
unchanged.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24 23:37:42 +01:00
Herbert Valerio Riedel
ca3259b360 leds: enable support for blink_set() platform hook in leds-gpio
Enhance leds-gpio to provide hardware-based led flashing by passing
through the blink_set() call to a optionally set platform-specific
function pointer.

Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24 23:37:42 +01:00
Németh Márton
4d404fd5c5 leds: Cleanup various whitespace and code style issues
Break the lines which were more than 80 characters into more
lines; replace SPACEs with TABs; correct ident at switch-case;
change character encoding from ISO-8859-2 to UTF-8.

The order of the functions in led-triggers.c changed in order
the similar functions can still be together under titles
"Used by LED Class", "LED Trigger Interface" and "Simple
LED Tigger Interface" as was grouped before when exported
with EXPORT_SYMBOL.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24 23:37:42 +01:00
Németh Márton
0013b23d66 leds: disable triggers on brightness set
Disable any active triggers when the brightness attribute is
set to zero.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24 23:34:18 +01:00
Mrton Nmeth
b3ba31f84e leds: Add mail LED support for "Clevo D400P"
The leds-clevo-mail module also works with model "Clevo D400P",
add this model to the white list.

Signed-off-by: Mrton Nmeth <nm127@freemail.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24 23:34:18 +01:00
Linus Torvalds
b0d19a378a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  iwlwifi: Fix built-in compilation of iwlcore
  net: Unexport move_addr_to_{kernel,user}
  rt2x00: Select LEDS_CLASS.
  iwlwifi: Select LEDS_CLASS.
  leds: Do not guard NEW_LEDS with HAS_IOMEM
  [IPSEC]: Fix catch-22 with algorithm IDs above 31
  time: Export set_normalized_timespec.
  tcp: Make use of before macro in tcp_input.c
  hamradio: Remove unneeded and deprecated cli()/sti() calls in dmascc.c
  [NETNS]: Remove empty ->init callback.
  [DCCP]: Convert do_gettimeofday() to getnstimeofday().
  [NETNS]: Don't initialize err variable twice.
  [NETNS]: The ip6_fib_timer can work with garbage on net namespace stop.
  [IPV4]: Convert do_gettimeofday() to getnstimeofday().
  [IPV4]: Make icmp_sk_init() static.
  [IPV6]: Make struct ip6_prohibit_entry_template static.
  tcp: Trivial fix to correct function name in a comment in net/ipv4/tcp.c
  [NET]: Expose netdevice dev_id through sysfs
  skbuff: fix missing kernel-doc notation
  [ROSE]: Fix soft lockup wrt. rose_node_list_lock
2008-04-23 12:23:45 -07:00
David S. Miller
00713e224e leds: Do not guard NEW_LEDS with HAS_IOMEM
The LEDS infrastructure itself does not require anything
that a platform dependant upon HAS_IOMEM.

The individual drivers do, but they are properly guarded
with the necessary platform dependencies.

One can even imagine a hypervisor based LED driver that
a platform without HAS_IOMEM might have.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-23 03:33:32 -07:00
Linus Torvalds
e80ab411e5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits)
  SCSI: convert struct class_device to struct device
  DRM: remove unused dev_class
  IB: rename "dev" to "srp_dev" in srp_host structure
  IB: convert struct class_device to struct device
  memstick: convert struct class_device to struct device
  driver core: replace remaining __FUNCTION__ occurrences
  sysfs: refill attribute buffer when reading from offset 0
  PM: Remove destroy_suspended_device()
  Firmware: add iSCSI iBFT Support
  PM: Remove legacy PM (fix)
  Kobject: Replace list_for_each() with list_for_each_entry().
  SYSFS: Explicitly include required header file slab.h.
  Driver core: make device_is_registered() work for class devices
  PM: Convert wakeup flag accessors to inline functions
  PM: Make wakeup flags available whenever CONFIG_PM is set
  PM: Fix misuse of wakeup flag accessors in serial core
  Driver core: Call device_pm_add() after bus_add_device() in device_add()
  PM: Handle device registrations during suspend/resume
  block: send disk "change" event for rescan_partitions()
  sysdev: detect multiple driver registrations
  ...

Fixed trivial conflict in include/linux/memory.h due to semaphore header
file change (made irrelevant by the change to mutex).
2008-04-21 15:49:58 -07:00
Rafael J. Wysocki
b844eba292 PM: Remove destroy_suspended_device()
After 2.6.24 there was a plan to make the PM core acquire all device
semaphores during a suspend/hibernation to protect itself from
concurrent operations involving device objects.  That proved to be
too heavy-handed and we found a better way to achieve the goal, but
before it happened, we had introduced the functions
device_pm_schedule_removal() and destroy_suspended_device() to allow
drivers to "safely" destroy a suspended device and we had adapted some
drivers to use them.  Now that these functions are no longer necessary,
it seems reasonable to remove them and modify their users to use the
normal device unregistration instead.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:28 -07:00
Russell King
cf816ecb53 Merge branch 'merge-fixes' into devel 2008-04-19 17:17:34 +01:00
Russell King
adf6d34e46 Merge branch 'omap2-upstream' into devel 2008-04-19 17:17:29 +01:00
Dmitry Baryshkov
507012f0a5 [ARM] 4974/1: Drop unused leds-tosa.
As now tosa uses leds-gpio, drop leds-tosa driver.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:09 +01:00
Russell King
15f7d677cc [ARM] Remove leds-tosa.c
See f99ee0b99214cf5329e711859e3f5fd02c820a24

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 10:14:31 +01:00
Kay Sievers
3c4ded9715 leds: fix platform driver hotplug/coldplug
Since 43cc71eed1, the platform
modalias is prefixed with "platform:". Add MODULE_ALIAS() to the
hotpluggable platform LED drivers, to re-enable auto loading.

[dbrownell@users.sourceforge.net: more drivers, registration fixes]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-15 19:35:40 -07:00
David Brownell
306dd85c1d leds: Remove incorrect use of preempt_count() from leds-gpio
It appears that we can't just check to see if we're in a task
context ... so instead of trying that, just make the relevant
leds always schedule a little worklet.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-03-31 23:31:13 +01:00
Uwe Kleine-König
d95cbe6158 leds: Fix potential leds-gpio oops
Call gpio_cansleep only after gpio_request succeeded avoiding an
oops.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-03-31 23:31:13 +01:00
David Brownell
de5c9edee7 PWM LED driver
This is a LED driver using the PWM on newer SOCs from Atmel; brightness is
controlled by changing the PWM duty cycle.  So for example if you've set up
two leds labeled "pwm0" and "pwm1":

	echo 0 > /sys/class/leds/pwm2/brightness	# off (0%)
	echo 80 > /sys/class/leds/pwm2/brightness
	echo 255 > /sys/class/leds/pwm2/brightness	# on (100%)

Note that "brightness" here isn't linear; maybe that should change.  Going
from 4 to 8 probably doubles perceived brightness, while 244 to 248 is
imperceptible.

This is mostly intended to be a simple example of PWM, although it's
realistic since LCD backlights are often driven with PWM to conserve
battery power (and offer brightness options).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:38 -08:00
Kristoffer Ericson
d39a7a63eb leds: Add HP Jornada 6xx driver
Add support for the LEDs on the HP Jornada 620/660/680/690 devices.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 10:10:28 +00:00
Rod Whitby
8fe217e7b6 leds: Remove the now uneeded ixp4xx driver
All boards using the IXP4XX-GPIO-LED driver have been updated to use
the generic leds-gpio driver instead.

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 10:02:39 +00:00
Michael Loeffler
f5506a2f71 leds: Add power LED to the wrap driver
The 3rd LED on this board is something like a power-led, it is on all the
time. With this change to the leds-wrap driver it is possible to use this
LED too.

Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 09:52:03 +00:00
Raphael Assenat
2b7f1b8c8f leds: Fix led-gpio active_low default brightness
When gpio_direction_output() is called, led_dat->active_low is used
as default value. This means that the led will always be off by
default. cdev.brightness should really have been set to LED_OFF
unconditionally to reflect this behavior.

Signed-off-by: Raphael Assenat <raph@8d.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 09:52:02 +00:00
Márton Németh
92e015cb31 leds: hw acceleration for Clevo mail LED driver
Add support for hardware accelerated LED blinking for the mail LED
commonly found on Clevo notebooks.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 09:52:02 +00:00
Márton Németh
4c79141d28 leds: Add support for hardware accelerated LED flashing
Extends the leds subsystem with a blink_set() callback function which can
be optionally implemented by a LED driver. If implemented, the driver can use
the hardware acceleration for blinking a LED.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 09:49:38 +00:00
Richard Purdie
6c152beefb leds: Standardise LED naming scheme
As discussed on LKML some notion of 'function' is needed in
LED naming. This patch adds this to the documentation and
standardises existing LED drivers.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 09:47:00 +00:00
Márton Németh
cec035de82 leds: Add clevo notebook LED driver
The driver supports the mail LED commonly found on different Clevo notebooks.
The driver access the LED through the i8042 hardware which is handled by
the input subsystem.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 09:22:17 +00:00
Rafael J. Wysocki
fa23f5cce8 leds: add possibility to remove leds classdevs during suspend/resume
Make it possible to unregister a led classdev object in a safe way during a
suspend/resume cycle.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Michael Buesch <mb@bu3sch.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:23 -08:00
Richard Purdie
8f115cd580 leds: Fix locomo LED driver oops
Fix locomo-leds to use the correct struct device to prevent an oops.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-12-31 23:11:11 +00:00
Richard Purdie
72f8da329e leds: Fix leds_list_lock locking issues
Covert leds_list_lock to a rw_sempahore to match previous LED trigger
locking fixes, fixing lock ordering.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-12-31 23:09:44 +00:00
Richard Purdie
dc47206e55 leds: Fix led trigger locking bugs
Convert part of the led trigger core from rw spinlocks to rw
semaphores. We're calling functions which can sleep from invalid
contexts otherwise. Fixes bug #9264.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-12-07 09:06:53 +00:00
David Brownell
199fb21d52 leds: bugfixes for leds-gpio
Three bugfixes to the leds-gpio driver, plus minor whitespace tweaks:

 - Do the INIT_WORK() before registering each LED, so if its trigger
   becomes immediately active it can schedule work without oopsing..

 - Use normal registration, not platform_driver_probe(), so that
   devices appearing "late" (hotplug type) can still be bound.

 - Mark the driver remove code as "__devexit", preventing oopses
   when the underlying device is removed.

These issues came up when using this driver with some GPIO expanders
living on serial busses, which act unlike "normal" platform devices:
they can appear and vanish along with the serial bus driver.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-11-05 21:54:41 +00:00
Uwe Kleine-König
4a739d55c2 fix typo "sort" -> "short"
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 01:55:58 +02:00
Linus Torvalds
821f3eff7c Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (40 commits)
  kbuild: introduce ccflags-y, asflags-y and ldflags-y
  kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP
  kbuild: enable use of AFLAGS and CFLAGS on commandline
  kbuild: enable 'make AFLAGS=...' to add additional options to AS
  kbuild: fix AFLAGS use in h8300 and m68knommu
  kbuild: check for wrong use of CFLAGS
  kbuild: enable 'make CFLAGS=...' to add additional options to CC
  kbuild: fix up CFLAGS usage
  kbuild: make modpost detect unterminated device id lists
  kbuild: call export_report from the Makefile
  kbuild: move Kai Germaschewski to CREDITS
  kconfig/menuconfig: distinguish between selected-by-another options and comments
  kconfig: tristate choices with mixed tristate and boolean values
  include/linux/Kbuild: remove duplicate entries
  kbuild: kill backward compatibility checks
  kbuild: kill EXTRA_ARFLAGS
  kbuild: fix documentation in makefiles.txt
  kbuild: call make once for all targets when O=.. is used
  kbuild: pass -g to assembler under CONFIG_DEBUG_INFO
  kbuild: update _shipped files for kconfig syntax cleanup
  ...

Fix up conflicts in arch/um/sys-{x86_64,i386}/Makefile manually.
2007-10-16 11:23:06 -07:00
Mike Rapoport
3696a8a426 [ARM] 4576/1: CM-X270 machine support
This patch provides core support for CM-X270 platform.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15 18:53:57 +01:00
Adrian Bunk
247537b9a2 kconfig: syntax cleanup - drop support for "depends/requires/def_boolean"
Remove the following redundant and never or rarely used kconfig syntax:

- "def_boolean" (same as "def_bool")
- "requires" (same as "depends on")
- "depends" (same as "depends on")

This patch contains the code changes and Kconfig updates.
The shipped files are in next patch to let actual codechange stand out.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:32 +02:00
Yoichi Yuasa
4276fd7349 leds: Update Cobalt Qube series front LED support
Update Cobalt Qube series front LED support.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11 22:24:00 +01:00
Yoichi Yuasa
97da7aaf46 leds: Add Cobalt Raq series LEDs support
Add Cobalt Raq series LEDs support.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11 22:24:00 +01:00
Yoichi Yuasa
f3b6b6cd00 leds: Rename leds-cobalt driver
The leds-cobalt driver only supports the Coable Qube series
(not included in Cobalt Raq series).
Rename the driver and update Kconfig/Makefile.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11 22:24:00 +01:00
Richard Purdie
f8a7c6fe14 leds: Convert from struct class_device to struct device
Convert the LEDs class from struct class_device to struct device
since class_device is scheduled for removal.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-16 01:15:51 +01:00
Richard Purdie
e3986f6380 leds: Add warning printks in error paths
Add warning printks if led_trigger_register_simple() fails.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-07-16 01:15:51 +01:00
Richard Purdie
3593a6d64d leds: Fix trigger unregister_simple if register_simple fails
Fix led_trigger_unregister_simple to handle the case where
led_trigger_register_simple fails, avoiding a NULL pointer
dereference.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-07-16 01:15:50 +01:00
Jan Engelhardt
66242f7ec5 leds: Use menuconfig objects II - LED
Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-07-16 01:15:50 +01:00
David Brownell
00852279af leds: Teach leds-gpio to handle timer-unsafe GPIOs
Teach the new leds-gpio driver that some GPIOs can't be accessed from
timer callbacks ... which is how all today's standard triggers use them.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-07-16 01:15:50 +01:00
Raphael Assenat
22e03f3b58 leds: Add generic GPIO LED driver
This patch adds support for GPIO connected leds via the new GPIO framework.

Information about leds (gpio, polarity, name, default trigger) is passed
to the driver via platform_data.

Signed-off-by: Raphael Assenat <raph@8d.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-07-16 01:15:50 +01:00
Martin Schwidefsky
e25df1205f [S390] Kconfig: menus with depends on HAS_IOMEM.
Add "depends on HAS_IOMEM" to a number of menus to make them
disappear for s390 which does not have I/O memory.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10 15:46:07 +02:00
Uwe Kleine-König
5886269962 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:58:16 +02:00
Florian Fainelli
2fea6f35c3 leds: Add support for Cobalt Server front LED
Add support for Cobalt Server front LED (MIPS)

Signed-off-by: Florian Fainell <florian.fainelli@int-evry.fr>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-15 21:37:29 +00:00
Arnaud Patard
bd4009af48 leds: Add IPAQ h1940 LEDs support
This patch adds the support for the IPAQ h1940 leds.

In order to create the amber led (used for the battery charging), the red and
green leds are set to the same default trigger. Due to hardware limitations,
the blue led can only be set in blinking mode.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-15 21:36:19 +00:00
Richard Purdie
34f1ca5406 [PATCH] Fix leds-s3c24xx hardware.h reference
Russell King recently reminded us that one shouldn't use
asm/arch/hardware.h but one should use asm/hardware.h
(http://lkml.org/lkml/2006/12/23/26).  Unfortunately, the leds-s3c24xx
driver is using the wrong header.  This patch is fixing that.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05 23:55:21 -08:00
Robert P. J. Day
bef1f40261 kconfig: Standardize "depends" -> "depends on" in Kconfig files
Standardize the miniscule percentage of occurrences of "depends" in
Kconfig files to "depends on", and update kconfig-language.txt to
reflect that.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12 20:04:19 +01:00
Kristian Kielhofner
0d75565f1e [PATCH] PCEngines WRAP LED Support
A driver for the PCEngines WRAP boards (http://www.pcengines.ch), which are
very similar to the Soekris net4801 (same NS SC1100 geode reference
design).

The LEDs on the WRAP are on different GPIO lines and I have modified and
copied the net48xx error led support for this.  It also includes support
for an "extra" led (in addition to error).  The three LEDs on the WRAP are
at GPIO lines 2,3,18 (WRAP LEDs from left to right).  This driver gives
access to the second and third LEDs by twiddling GPIO lines 3 & 18.

Because these boards are so similar to the net48xx, I basically sed-ed that
driver to form the basis for leds-wrap.c.  The only changes from
leds-net48xx.c are:

 - #define WRAP_EXTRA_LED_GPIO

 - name changes

 - duplicate relevant sections to provide support for the "extra" led

 - reverse the various *_led_set values.  The WRAP is "backwards" from the
   net48xx, and these needed to be updated for that.

[akpm@osdl.org: build fix]
Signed-off-by: Kristian Kielhofner <kris@krisk.org>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:36 -08:00
Al Viro
f6a570333e [PATCH] severing module.h->sched.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-12-04 02:00:22 -05:00
Jeff Garzik
12fda16814 [PATCH] drivers/led: handle sysfs errors
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 08:18:46 -07:00
Dave Jones
038b0a6d8d Remove all inclusions of <linux/config.h>
kbuild explicitly includes this at build time.

Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-04 03:38:54 -04:00
Henrik Kretzschmar
70d63ccc71 kerneldoc-typo in led-class.c
Fixes a typo in led-class.c kerneldoc.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:31:30 +02:00
Uwe Zeisberger
f30c226954 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:01:26 +02:00
Paul Collins
e3e5fc91d9 [PATCH] leds: turn LED off when changing triggers
I was playing with LED triggers when I noticed that changing from heartbeat
(or ide-disk) to "none" at the right moment would leave the LED stuck on.
This is easy to reproduce by doing "find / >/dev/null" with the ide-disk
trigger enabled and then switching to "none".

Here is a patch that fixes the problem by explicitly turning the LED off
after removing the existing trigger.

Signed-off-by: Paul Collins <paul@ondioline.org>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:21 -07:00
Chris Boot
cfedc920a7 [PATCH] Make net48xx-led use scx200_gpio_ops
Make the next48xx LED code use scx200_gpio_ops instead of raw SCx200 GPIO
accesses.

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 09:18:06 -07:00
Chris Boot
bca3bffec9 [PATCH] net48xx LED cleanups
Add the DRVNAME define to remove the two separate references of the driver
name by string, and move the .driver.owner into the existing .driver
sub-structure.

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14 21:53:54 -07:00
Chris Boot
1a87d9425e [PATCH] LED Class support for Soekris net48xx
Add LED Class device support for the Soekris net48xx Error LED.  Tested
only on a net4801, but should work on a net4826 as well.  I'd love to find
a way of detecting a Soekris net48xx device but there is no DMI or any
Soekris-specific PCI devices.

[akpm@osdl.org: fixlets, cleanups]
Signed-off-by: Chris Boot <bootc@bootc.net>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:26 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Ingo Molnar
34af946a22 [PATCH] spin/rwlock init cleanups
locking init cleanups:

 - convert " = SPIN_LOCK_UNLOCKED" to spin_lock_init() or DEFINE_SPINLOCK()
 - convert rwlocks in a similar manner

this patch was generated automatically.

Motivation:

 - cleanliness
 - lockdep needs control of lock initialization, which the open-coded
   variants do not give
 - it's also useful for -rt and for lock debugging in general

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:39 -07:00
Atsushi Nemoto
891c668b90 [PATCH] LED: add LED heartbeat trigger
Add an LED trigger acts like a heart beat.  This can be used as a
replacement of CONFIG_HEARTBEAT code exists in some arch's timer code.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Cc: "Nish Aravamudan" <nish.aravamudan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:23 -07:00
Jonathan McDowell
9becde79d2 [PATCH] leds: Amstrad Delta LED support
Use the new LED infrastructure to support the 6 LEDs present on the Amstrad
Delta.

[akpm@osdl.org: cleanup]
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Ackde-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Ben Dooks <ben@fluff.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:05 -07:00
Richard Purdie
b7408aff2d [ARM] 3563/1: LED: Set the LOCOMO LED driver default triggers
Patch from Richard Purdie

Set the default triggers for the LOCOMO LED driver.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 13:08:39 +01:00
Richard Purdie
3dc7b82ea7 [PATCH] LED: Fix sysfs store function error handling
Fix the error handling of some LED _store functions.  This corrects them to
return -EINVAL if the value is not numeric with an optional byte of trailing
whitespace.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15 11:20:56 -07:00
Richard Purdie
a8d2e7d952 [PATCH] LED: Improve Kconfig information
Improve the NEW_LEDS Kconfig information to say what it does as well as what
it doesn't.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15 11:20:56 -07:00
Ben Dooks
24f51e8174 [PATCH] leds: reorganise Kconfig
Reorganise the drivers/leds Kconfig file to have the LED trigger enable
with the triggers themselves.

Also add comments to divide up the sections into the drivers and triggers

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:40 -07:00
Ben Dooks
baa351eaf3 [PATCH] leds: fix IDE disk trigger name
The IDE Disk LED trigger has the same name as the timer trigger.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:40 -07:00
Ben Dooks
54bdc47010 [PATCH] S3C24XX GPIO LED support
GPIO LED support for Samsung S3C24XX SoC series processors.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:40 -07:00
Richard Purdie
2bfb646cdf [PATCH] LED: Add IDE disk activity LED trigger
Add an LED trigger for IDE disk activity to the ide-disk driver.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Dirk Opfer
6d0cf3e048 [PATCH] LED: add device support for tosa
Adds LED drivers for LEDs found on the Sharp Zaurus c6000 model (tosa).

Signed-off-by: Dirk Opfer <dirk@opfer-online.de>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
John Bowler
6a0c51bfce [PATCH] LED: add LED device support for ixp4xx devices
NEW_LEDS support for ixp4xx boards where LEDs are connected to the GPIO lines.

This includes a new generic ixp4xx driver (leds-ixp4xx-gpio.c name
"IXP4XX-GPIO-LED")

Signed-off-by: John Bowler <jbowler@acm.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Richard Purdie
4d3cb35476 [PATCH] LED: add LED device support for locomo devices
Adds an LED driver for LEDs exported by the Sharp LOCOMO chip as found on some
models of Sharp Zaurus.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Richard Purdie
3179108daa [PATCH] LED: add LED device support for the zaurus corgi and spitz models
Adds LED drivers for LEDs found on the Sharp Zaurus c7x0 (corgi, shepherd,
husky) and cxx00 (akita, spitz, borzoi) models.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Richard Purdie
6655c6fe57 [PATCH] LED: add LED timer trigger
Add an example of a complex LED trigger in the form of a generic timer which
triggers the LED its attached to at a user specified frequency and duty cycle.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Richard Purdie
c3bc9956ec [PATCH] LED: add LED trigger tupport
Add support for LED triggers to the LED subsystem.  "Triggers" are events
which change the state of an LED.  Two kinds of trigger are available, simple
ones which can be added to exising code with minimum disruption and complex
ones for implementing new or more complex functionality.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:56 -08:00
Richard Purdie
c72a1d608d [PATCH] LED: add LED class
Add the foundations of a new LEDs subsystem.  This patch adds a class which
presents LED devices within sysfs and allows their brightness to be
controlled.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:56 -08:00