Set spec->en_3kpull_low default to true.
Then fillback ALC236 and ALC257 to false.
Additional note: this addresses a regression caused by the previous
fix 69ea4c9d02 ("ALSA: hda/realtek - remove 3k pull low procedure").
The previous workaround was applied too widely without necessity,
which resulted in the pop noise at PM again. This patch corrects the
condition and restores the old behavior for the devices that don't
suffer from the original problem.
Fixes: 69ea4c9d02 ("ALSA: hda/realtek - remove 3k pull low procedure")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217732
Link: https://lore.kernel.org/r/01e212a538fc407ca6edd10b81ff7b05@realtek.com
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some systems using CS35L41 with HDA were released without some
required _DSD properties in ACPI. To support these special cases,
add an api to configure the correct properties for systems with
this issue.
This initial commit moves the no _DSD support for Lenovo
Legion Laptops (CLSA0100, CLSA0101) into a new framework which
can be extended to support additional laptops in the future.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230815161033.3519-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All I2C Dell Oasis models using CS35L41 have been changed to use SPI.
In addition, System 10280cc5 is no longer required.
Fixes: de90f5165b ("ALSA: hda/realtek: Add support for DELL Oasis 13/14/16 laptops")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230809142957.675933-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These HP G11 laptops use Realtek HDA codec combined with
2xCS35L41 Amplifiers using SPI or I2C with External Boost.
Laptop 103c8c26 has been removed as this has been replaced
by this new series of laptops.
Fixes: 3e10f6ca76 ("ALSA: hda/realtek: Add quirk for HP EliteBook G10 laptops")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230809142957.675933-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ the case for `strncpy`!
It should be noted that the current implementation is unlikely to have a
bug because `drv_name` is a string literal with a size of 9 while
`card->driver` has a size of 16. However, it is probably worthwhile to
switch to a more robust and less ambiguous interface.
[1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
[2]: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20230807-sound-pci-hda-v1-1-6d9cdcd085ca@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Print amp configuration information to be able to confirm ACPI
_DSD information (and other useful info) for each amp on each
system using CS35L41, without having to get the acpidump.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230802121235.467358-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ACPI nodes for CS35L56 can contain an extra I2CSerialBusV2 that
is not a real device, it is an alias address.
This alias address will not be in the cirrus,dev-index array, so reject
any instantions with a device address not found in the array.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230731165726.7940-10-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A tuning patch is always needed to enable the ASP audio port.
If the BIOS did not patch the firmware, then it is mandatory to
have a .bin file.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230731165726.7940-9-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A RAM firmware can only be downloaded if the CS35L56 is currently
running from ROM firmware. The driver must not try to overwrite
the RAM if the CS35L56 is already running from that RAM.
Firmware can be downloaded in these two cases:
- The BIOS has already patched the firmware (secured mode).
In this case the firmware files will only contain tunings that
are safe to overwrite.
- The CS35L56 is running the built-in ROM firmware.
After a RAM firmware has been downloaded it can only be cleared by
hard resetting CS35L56. Some systems only hard-reset during
power-on and do not give the driver control of hard reset.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230731165726.7940-8-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If cs35l56_hda_fw_load() successfully called cs_dsp_power_up() the error
path must balance that with a call to cs_dsp_power_down().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230731165726.7940-7-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In cs35l56_hda_unbind() cs_dsp_power_down() must be called to cleanup
before calling cs_dsp_remove cs_dsp_remove().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230731165726.7940-6-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Always call cs_dsp_power_up() and cs_dsp_run() in
cs35l56_hda_fw_load() even if there aren't any firmware files
to download. Also, if there aren't any firmware files to
download there is no need to do cs35l56_firmware_shutdown() and
cs35l56_system_reset().
If there aren't any firmware files there's no need to write
anything to the CS35L56 registers to make it work - it will
already be running the ROM firmware. So it's not strictly
necessary to start cs_dsp.
But it's perfectly ok to call cs_dsp_power_up() and
cs_dsp_run() without downloading any firmware. This avoids
having to support a state where audio is playing but cs_dsp
is not running.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230731165726.7940-5-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When firmware is reloaded after a system resume cs_dsp_power_down() should
be called before calling cs_dsp_power_up().
The fw_patched flag should also be cleared and only set again if the
firmware download succeeded.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230731165726.7940-4-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Only call regcache_mark_dirty() in cs35l56_hda_fw_load() if
the CS35L56 was SYSTEM_RESET.
recache_mark_dirty() changes the behaviour of regcache_sync()
to write out cache values that are not the default value, and
skip cache values that are the default.
AUDIO_REINIT does not reset the registers. regcache_mark_dirty()
after AUDIO_REINIT could cause the regcache_sync() to sync
registers incorrectly because it will assume that all registers
have reset to default.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230731165726.7940-3-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move the call to cs_dsp_run() in cs35l56_hda_fw_load() so that it
is after the CS35L56 has been reset/reinit'd and the regmap
cache has been synced.
cs_dsp_run() syncs up ALSA control cache values with the DSP memory
so this must not be done until the firmware has reinitialized.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230731165726.7940-2-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Smatch complains that this return should be a goto:
sound/pci/hda/cs35l56_hda.c:910 cs35l56_hda_common_probe()
warn: missing unwind goto?
The goto error disables cansleep so that seems reasonable.
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/465160f4-b7cf-41d5-931e-d6c9e68fa3c7@moroto.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This laptop has CS35L41 amp connected via I2C.
With this patch speakers begin to work if the
missing _DSD properties are added to ACPI tables.
Signed-off-by: Pavel Asyutchenko <svenpavel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230726223732.20775-1-svenpavel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This HP Notebook used ALC236 codec with COEF 0x07 idx 1 controlling
the mute LED. Enable already existing quirk for this device.
Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230725111509.623773-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here's an initial batch of updates for ASoC for this release cycle.
We've got a bunch of new drivers in here, a bit of core work from
Morimoto-san and quite a lot of janitorial work. There's several
updates that pull in changes from other subsystems in order to build
on them:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes.
- Create a library function for intlog10() and use it in the NAU8825
driver.
- Include the ASoC tests, including the topology tests, in the default
KUnit full test coverage. This also involves enabling UML builds of
ALSA since that's the default KUnit test environment which pulls in
the addition of some stubs to the driver.
- More factoring out from Morimoto-san.
- Convert a lot of drivers to use the more modern maple tree register
cache.
- Support for AMD machines with MAX98388 and NAU8821, Cirrus Logic
CS35L36, Intel AVS machines with ES8336 and RT5663 and NXP i.MX93.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmS/t9MACgkQJNaLcl1U
h9Dg4wf+Njvy5zphgUJlSJ7vNj7GtzgldnWwfQrb+19BOtv5HHIYg4e/Yr4eWdgc
rg5DGIGvr8sxYQ44TCA59sXdTuakkNF/ejDoj8AwNsr/J3sD6S+FTkV8qLFcgQ3r
+0ElZ26I2kd6gfvDlwHfa5rJVPCa7vrg3o6EHccqRX9CSyPJRlwRqRRj+w8ftZtV
rZ7Gapz3E4A3mBo7VIO/kEgI1uSmaShM8d4HoVmxJEKJ6lbyX8SIXMBzZVq5z/iX
DcnRaMPAMhgzytmdDJ7SjJuxL0EOd6p8Lnk0jILvO6U30Z7aTunzMuK/o0GHqFkm
eHveoHIU4gbt3YqDFgPosPlxi4OCgw==
=KJZq
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.6-early' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.6
Here's an initial batch of updates for ASoC for this release cycle.
We've got a bunch of new drivers in here, a bit of core work from
Morimoto-san and quite a lot of janitorial work. There's several
updates that pull in changes from other subsystems in order to build
on them:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes.
- Create a library function for intlog10() and use it in the NAU8825
driver.
- Include the ASoC tests, including the topology tests, in the default
KUnit full test coverage. This also involves enabling UML builds of
ALSA since that's the default KUnit test environment which pulls in
the addition of some stubs to the driver.
- More factoring out from Morimoto-san.
- Convert a lot of drivers to use the more modern maple tree register
cache.
- Support for AMD machines with MAX98388 and NAU8821, Cirrus Logic
CS35L36, Intel AVS machines with ES8336 and RT5663 and NXP i.MX93.
Currently we only mute after playback has finished, and unmute
prior to setting global enable. To prevent any possible pops
and clicks, mute at probe, and then only unmute after global
enable is set.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-12-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To ensure consistency between the HDA core and the CS35L41 HDA
driver, add a device_link between them. This ensures that the
HDA core will suspend first, and resume second, meaning the
amp driver will not miss any events from the playback hook from
the HDA core during system suspend and resume.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-11-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In order to correctly pause audio on suspend, amps using external boost
require parts of the pause sequence to be called for all amps before moving
on to the next steps.
For example, as part of pausing the audio, the VSPK GPIO must be disabled,
but since this GPIO is controlled by one amp, but controls the boost for
all amps, it is required to separate the calls.
During playback this is achieved by using the pre and post playback hooks,
however during system suspend, this is not possible, so to separate the
calls, we use both the .prepare and .suspend calls to pause the audio.
Currently, for this reason, we do not restart audio on system resume.
However, we can support this by relying on the playback hook to resume
playback after system suspend.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-10-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use new hooks to ensure separation between play/pause actions,
as required by external boost.
External Boost on CS35L41 requires the amp to go through a
particular sequence of steps. One of these steps involes
the setting of a GPIO. This GPIO is connected to one or
more of the amps, and it may control the boost for all of
the amps. To ensure that the GPIO is set when it is safe
to do so, and to ensure that boost is ready for the rest of
the sequence to be able to continue, we must ensure that
the each part of the sequence is executed for each amp
before moving on to the next part of the sequence.
Some of the Play and Pause actions have moved from Open to
Prepare. This is because Open is not guaranteed to be called
again on system resume, whereas Prepare should.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-9-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These hooks can be used to add callbacks that would be run before and after
the main playback hooks. These hooks would be called for all amps, before
moving on to the next hook, i.e. pre_playback_hook would be called for
all amps, before the playback_hook is called for all amps, then finally
the post_playback_hook is called for all amps.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-8-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are several steps required to put the system into system suspend.
Some of these steps may fail, so the driver should pass up the errors
if they occur.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-6-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In order to properly system suspend, it is necessary to unload the firmware
and ensure the chip is ready for shutdown (if necessary). If the system
is currently in runtime suspend, it is necessary to wake up the device,
and then make it ready. Currently, the wake does not correctly resync
the device, which may mean it cannot suspend correctly. Fix this by
performaing a resync.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-5-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, we do not check the return status of the pause command,
immediately after we load firmware. If the pause has failed,
the firmware is not running.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To enable the speaker output in external boost mode, 2 registers must
be set, one after another. The longer the time between the writes of
the two registers, the more likely, and more loudly a pop may occur.
To minimize this, an mbox command can be used to allow the firmware
to perform this action, minimizing any delay between write, thus
minimizing any pop or click as a result. The old method will remain
when running without firmware.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a driver for the Cirrus Logic CS35L56 amplifier. This uses the same
component binding API as the CS35L41 driver. This is not a standalone
HDA device; it provides control of the CS35L56 for systems that use a
combination of an HDA codec and CS35L56 amplifiers with audio routed
through the HDA codec.
The CS35L56 combines a high-performance mono audio amplifier, Class-H
tracking inductive boost converter, Halo Core(TM) DSP and a DC-DC boost
converter supporting Class-H tracking.
Control interfaces are I2C or SPI through the standard Linux I2C or SPI
bus framework.
Most chip functionality is controlled by on-board ROM firmware that is
always running. Firmware patches can be applied by the driver in the form
of a .wmfw file (firmware patch) and/or a .bin file (system tuning).
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230721132120.5523-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add #includes of dependencies into hda_auto_parser.h and hda_generic.h
hda_auto_parser.h uses definitions in hda_local.h.
hda_generic.h uses definitions in hda_local.h and hda_auto_parser.h.
It also references struct hda_jack_callback, but only as a pointer.
This has been forward-declared so hda_jack.h only needs to be
included in source that actually uses it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230721132120.5523-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch order of Intel MTL and RPL codec entries to keep the codec device
id list nicely ordered. Also use the opportunity to fix the naming
to the convention used elsewhere in the drivers.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230721135722.31288-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of open-code, use the new standard helper to manage vmaster
stuff for code simplification.
Also, handle the errors from the helper more properly instead of
silently ignoring.
The code changes the call order of snd_ctl_add() of the vmaster object
and its followers for avoiding the possible memory leaks at error
path. But there should be no difference in the functionality.
Link: https://lore.kernel.org/r/20230721071643.3631-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of open-code, use the new standard helper to manage vmaster
stuff for code simplification.
Also, handle the errors from the helper more properly instead of
silently ignoring.
Link: https://lore.kernel.org/r/20230721071643.3631-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of open-code, use the new standard helper to manage vmaster
stuff for code simplification.
Except for a debug print, there should be no functional change.
Link: https://lore.kernel.org/r/20230721071643.3631-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace an open code with the new snd_ctl_find_id_mixer().
There is no functional change.
Also, add the missing NULL checks in psc724_set_jack_state() to deal
with error cases.
Link: https://lore.kernel.org/r/20230720082108.31346-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adding support for new Dell laptops using Cirrus Logic CS35L41
smart amplifiers with Realtek codec.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230720082022.13033-2-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Generic fixup for CS35L41 amplifies should not have vendor specific
chained fixup. For ThinkPad laptops with led issue, we can just add
specific fixup.
Fixes: a6ac60b36d (ALSA: hda/realtek: Fix mute led issue on thinkpad with cs35l41 s-codec)
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230720082022.13033-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few ALSA control API helpers like snd_ctl_rename(), snd_ctl_remove()
and snd_ctl_find_*() suppose the callers taking card->controls_rwsem.
But it's error-prone and fragile. This patch set tries to change
those API functions to take the card->controls>rwsem internally by
themselves, so that the drivers don't need to take care of lockings.
After applying this patch set, only a couple of places still touch
card->controls_rwsem (which are OK-ish as they need for traversing the
control linked list).
Link: https://lore.kernel.org/r/20230718141304.1032-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=V5+5
-----END PGP SIGNATURE-----
Merge tag 'tags/ctl-lock-fixes-6.6' into for-next
ALSA: Make control API taking controls_rwsem consistently
A few ALSA control API helpers like snd_ctl_rename(), snd_ctl_remove()
and snd_ctl_find_*() suppose the callers taking card->controls_rwsem.
But it's error-prone and fragile. This patch set tries to change
those API functions to take the card->controls>rwsem internally by
themselves, so that the drivers don't need to take care of lockings.
After applying this patch set, only a couple of places still touch
card->controls_rwsem (which are OK-ish as they need for traversing the
control linked list).
Link: https://lore.kernel.org/r/20230718141304.1032-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that snd_ctl_find_id() takes the locking itself, we can get rid of
the messy locking in the caller side in snd_emu10k1_verify_controls().
Link: https://lore.kernel.org/r/20230718141304.1032-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For reducing the unnecessary use of controls_rwsem in the drivers,
this patch adds a new variant for snd_ctl_find_*() helpers:
snd_ctl_find_id_locked() and snd_ctl_find_numid_locked() look for a
kctl element inside the card->controls_rwsem -- that is, doing the
very same as what snd_ctl_find_id() and snd_ctl_find_numid() did until
now. snd_ctl_find_id() and snd_ctl_find_numid() remain same,
i.e. still unlocked version, but they will be switched to locked
version once after all callers are replaced.
The patch also replaces the calls of snd_ctl_find_id() and
snd_ctl_find_numid() in a few places; all of those are places where we
know that the functions are called properly with controls_rwsem held.
All others are without rwsem (although they should have been).
After this patch, we'll turn on the locking in snd_ctl_find_id() and
snd_ctl_find_numid() to be more race-free.
Link: https://lore.kernel.org/r/20230718141304.1032-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, snd_ctl_remove() requires its caller to take
card->controls_rwsem manually before the call for avoiding possible
races. However, many callers don't care and miss the locking.
Basically it's cumbersome and error-prone to enforce it to each
caller. Moreover, card->controls_rwsem is a field that should be used
only by internal or proper helpers, and it's not to be touched at
random external places.
This patch is an attempt to make those calls more consistent: now
snd_ctl_remove() takes the card->controls_rwsem internally, just like
other API functions for kctls. Since a few callers already take the
controls_rwsem locks, the patch removes those locks at the same time,
too.
Link: https://lore.kernel.org/r/20230718141304.1032-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP Laptop 15s-eq2xxx uses ALC236 codec and controls the mute LED using
COEF 0x07 index 1. No existing quirk covers this configuration.
Adds a new quirk and enables it for the device.
Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230718161241.393181-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use PCI device IDs from pci_ids.h header and while at it to simplify
declarations change to using PCI_DEVICE_DATA() macro for Intel IDs and
PCI_VDEVICE() for all other that have defined vendor.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-11-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of using local macro to match PCI device, use global one. As
Apollolake is Broxton-P successor that made it to the market, be precise
and use APL shortcut.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current code references 0x1a98 which is BXT-M (not -T as it is
commented) and it's an RVP, BXT-M B0 to be specific. From what we know
no BXT is available on market.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230717114511.484999-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Remove the "log-like" parts, following the same logic as the previous
commit
- Unify format
- Add missing major contributors, including myself
- Sort entries in order of first contribution (Creative comes last for
optical reasons; they don't appear to have directly contributed
anyway)
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230715160839.326978-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Empty BUGS and TODO sections don't really help anyone, so remove them.
Version information is chronically outdated, and not really useful in a
git world anyway, so remove it as well.
Also remove duplicated (and outdated, of course) status section from
p16v.h (the one in p16v.c is in better shape).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230715160839.326978-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
85;95;0c
This uses IRQs to track spontaneous changes to the word clock source
register.
FWIW, that this can happen in the first place is the reason why it is
futile to lock the clock source mixer setting while the device is open -
we can't consistently control the rate anyway. Though arguably, we
should reset any open streams when that happens, as they become
corrupted anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230715160738.326832-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714175109.4066599-1-robh@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This was the ALC283 depop procedure.
Maybe this procedure wasn't suitable with new codec.
So, let us remove it. But HP 15z-fc000 must do 3k pull low. If it
reboot with plugged headset,
it will have errors show don't find codec error messages. Run 3k pull
low will solve issues.
So, let AMD chipset will run this for workarround.
Fixes: 5aec989130 ("ALSA: hda/realtek - ALC236 headset MIC recording issue")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Reported-by: Joseph C. Sible <josephcsible@gmail.com>
Closes: https://lore.kernel.org/r/CABpewhE4REgn9RJZduuEU6Z_ijXNeQWnrxO1tg70Gkw=F8qNYg@mail.gmail.com/
Link: https://lore.kernel.org/r/4678992299664babac4403d9978e7ba7@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mixer, PCM prepare, MIDI, synth driver, and procfs callbacks are all
always invoked with IRQs enabled, so there is no point in saving the
state.
snd_emu1010_load_firmware_entry() is called from emu1010_firmware_work()
and snd_emu10k1_emu1010_init(); the latter from snd_emu10k1_create() and
snd_emu10k1_resume(), all of which have IRQs enabled.
The voice and memory functions are called from mixed contexts, so they
keep the state saving.
The low-level functions all keep the state saving, because it's not
feasible to keep track of what is called where.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230712145750.125086-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GZ301V series which uses an SPI connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230706223323.30871-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG G614J series which uses an SPI connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-5-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GA402X series which uses an I2C connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-3-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GV601V series which uses an I2C connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These models use NSIWAY amplifiers for internal speaker, but cannot put
sound outside from these amplifiers. So eapd verbs are needed to initialize
the amplifiers. They can be added during boot to get working sound out
of internal speaker.
Signed-off-by: dengxiang <dengxiang@nfschina.com>
Link: https://lore.kernel.org/r/20230703021751.2945750-1-dengxiang@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This applies a SND_PCI_QUIRK(...) to the Clevo NPx0SNx barebones fixing the
microphone not being detected on the headset combo port.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230628155434.584159-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A fairly quiet release from a core and framework point of view, but a
very big one from the point of view of new drivers:
- More refectoring from Morimoto-san, this time mainly around DAI
links and how we control the ordering of trigger() callbacks.
- Convert a lot of drivers to use maple tree based caches.
- Lots of work on the x86 driver stack.
- Compressed audio support for Qualcomm.
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Longsoon platforms,
Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with
NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSZjIQACgkQJNaLcl1U
h9Dm0wf/X1q4n6KSXLvSyoSUxS/RWzWgyDDX7a4iLcFiov3ehHpVwzhwI/+1xSzs
SGhg6q2rud05SejFBh+2L7HMZfdXWSfW9ukaGz3UsCdqw3/7zAUFgY1RGtjZO4lA
eH50vEME9RbkIDgyxzYe9eViaKGh2fNxIbQ2d9hx6+nIVNfuuSikvGz4K/9PD0DN
2tBgzuIWwrPIbvMV2zHDCycmVG0lqScMWjIrdpDFxa63aPTr920YqYWSoQfOUR1s
j9zlZWnclTjrqRl1GZHxnM8N70vmutZWXAB1WFjal6mmMd6lUG71CyYHvA5h5D0V
ygNpn9B5REYlHBVzI43uT3nog+iS4Q==
=dbjW
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.5
A fairly quiet release from a core and framework point of view, but a
very big one from the point of view of new drivers:
- More refectoring from Morimoto-san, this time mainly around DAI
links and how we control the ordering of trigger() callbacks.
- Convert a lot of drivers to use maple tree based caches.
- Lots of work on the x86 driver stack.
- Compressed audio support for Qualcomm.
- Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
Ingenic X1000, Intel systems with various CODECs, Longsoon platforms,
Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with
NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781.
On HP EliteBook 835/845/845W G10, the audio LEDs can be enabled by
ALC285_FIXUP_HP_MUTE_LED. So use it accordingly.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Fixes: 3e10f6ca76 ("ALSA: hda/realtek: Add quirk for HP EliteBook G10 laptops")
Link: https://lore.kernel.org/r/20230626130301.301712-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GV601V series.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230621085715.5382-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG G634Z series.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230619060320.1336455-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
smatch error:
sound/pci/ac97/ac97_codec.c:2354 snd_ac97_mixer() error:
we previously assumed 'rac97' could be null (see line 2072)
remove redundant assignment, return error if rac97 is NULL.
Fixes: da3cec35dd ("ALSA: Kill snd_assert() in sound/pci/*")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20230615021732.1972194-1-suhui@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The file is called spdif-in, but we abused it to show only sample rates
from various sources. Rectify it as far as possible (the FPGA doesn't
give us a lot of information).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-10-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is only a very partial fix - the frequency-dependent envelope & LFO
register values aren't adjusted.
But I'm not sure they were even correct at 48 kHz to start with, as most
of them are precalculated by common code which assumes an EMU8K-specific
44.1 kHz word clock, and it seems somewhat unlikely that the hardware's
register interpretation was adjusted to compensate for the different
word clock.
In any case I'm not going to spend time on fixing that, as this code is
unlikely to be actually used by anyone today.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that we know the actual word clock, we can:
- Put the resulting rate into the hardware info
- At 44.1 kHz word clock shift the rate for the pitch calculations,
which presume a 48 kHz word clock
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The value isn't used yet; the subsequent commits will do that.
This ignores the existence of rates above 48 kHz, which is fine, as the
hardware will just switch to the fallback clock source when fed with a
rate which is incompatible with the base clock multiplier, which
currently is always x1.
The sample rate display in /proc spdif-in is adjusted to reflect our
understanding of the input rates.
This is tested only with an 0404b card without sync card, so there is a
lot of room for improvement.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The actually available clock sources depend on the available audio input
ports and dedicated clock input ports.
This includes refactoring the code to be data-driven to remain
manageable.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, we set the fallback as a side effect of setting the source. But
the fallback makes no sense at all when an internal clock is selected.
Defaulting to 48k for S/PDIF & ADAT makes sense, but as that is the
global default and we're not changing it automatically any more, it's
just fine to leave it entirely to the explicit setting.
This changes the name of the pre-existing control to something more
appropriate (regardless of the split), so users will need to adjust
their mixer settings.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On loongson controller, the value of WALLCLK register
is always 0, which is meaningless, so we return directly.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/185df71ef413ab190460eb377703214ee7288aeb.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On loongson controller, after calling snd_hdac_stream_updateb()
to enable DMA engine, the SDnCTL.STRM will become to zero. We
need to access SDnCTL in dword to keep SDnCTL.STRM is not changed.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/27aeddf5ebbe7c69631cec0e489c1b264be94990.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On loongson controller, RIRBSTS.RINTFL cannot be cleared,
azx_interrupt() is called all the time. We disable RIRB
interrupt, and use polling mode by default.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/d309a75424d438b958d90d797b4f1ba45468e090.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the commit 7bb6234095 ("ALSA: hda/realtek: fix speaker, mute/micmute
LEDs not work on a HP platform"), speakers and LEDs are fixed but only 2
CS35L41 amplifiers on SPI bus connected to Realtek codec are enabled. Need
the ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED to get all amplifiers working.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Fixes: 7bb6234095 ("ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP platform")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230606145747.135966-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ensure Firmware Load control and Firmware Type control
returns 1 when the value changes.
Remove fw_mutex from firmware load control put, since it is
unnecessary, and prevents any possibility of mutex inversion.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230606103436.455348-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HD-audio core code replaces the kctl->id.index of SPDIF-related
controls after assigning via snd_ctl_add(). This doesn't work any
longer with the new Xarray lookup change. The change of the kctl->id
content has to be done via snd_ctl_rename_id() helper, instead.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606093855.14685-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
cmipci driver replaces the kctl->id.device after assigning the kctl
via snd_ctl_add(). This doesn't work any longer with the new Xarray
lookup change. It has to be set before snd_ctl_add() call instead.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606093855.14685-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ymfpci driver replaces the kctl->id.device after assigning the kctl
via snd_ctl_add(). This doesn't work any longer with the new Xarray
lookup change. It has to be set before snd_ctl_add() call instead.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606093855.14685-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The new xarray lookup code requires to know complete kcontrol->id before
snd_ctl_add() call. Reorder the code to make the initialization properly.
Cc: stable@kernel.org # v5.19+
Reported-by: Martin Zidek <zidek@master.cz>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606073122.597491-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Headset microphone on this platform does not work without
ALC897_FIXUP_HEADSET_MIC_PIN fixup.
Signed-off-by: RenHai <kean0048@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230602003604.975892-1-kean0048@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Include the FX bus map, without which the already present send routing
info would require looking up the documentation.
- Include the physical I/O channels as known to the driver
- Make the multi-channel capture map actually name the mapped input
channels rather than "FXBUS" (Audigy) or even "???" (SbLive)
- The latter two are omitted for E-MU cards, as their physical I/O is
routed through the FPGA
- While at it, make the "Card" field somewhat more useful
This includes de-duplicating the label tables between emuproc and emufx,
updating/improving the FX bus label table, and making the SB Live! 5.1
multi-track capture channel mapping hack data-driven.
Tested-by: Jonathan Dowland <jon@dow.land>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Include the routing information, which can be actually read back.
Somewhat as a drive-by, make the register dump format less obscure - the
previous one made no sense at all.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems to make little sense to include the FX send routing, but not
the amounts.
This also simplifies the code somewhat, and lines up the output.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The limits were appropriate only for the 2nd set.
FWIW, the channel count 4 for the 2nd set is suspicious as well - at
least P17V_PLAYBACK_FIFO_PTR actually has 8 channels, and comments on
HCFG2 hint at that as well. But all bitmasks are documented only for 4
channels. Anyway, rectifying that is out of scope for this patch.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 2nd register set belongs to the P16V chip (or embedded P17V module),
so there is nothing to show when no such part is present. Gen2 E-MU
cards have a P17V, but it's entirely unused, so we hide it there as
well.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230526101659.437969-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20230525203640.677826-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series handles a few issues related to the ES8316 audio
codec, discovered while doing some testing on the Rock 5B board.
Lenovo M70/M90 Gen4 are equipped with ALC897, and they need
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
The previous quirk for M70/M90 is for Gen3.
Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230524113755.1346928-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On SB cards the number of captured channels is derived from the voice
mask mixer control. But for E-MU cards this wasn't actually "wired up",
so changing the mask would simply mess up the recording.
We could fix that, but the channel routing through the FPGA makes the
masking redundant. So instead we hide the control, and let the user
specify the PCM channel count the traditional way.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236059-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hardware can deal with primes up to 7 and power-of-two multiples
thereof; the limitation is reflected by the possible buffer sizes.
Note that setting the voice mask will not allow more than 16 channels
even on Sound Blaster Audigy anymore, as 32 seems a bit excessive (the
code overall appears to think so, just not in this case).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236059-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need to specify that the hardware supports non-standard rates, as
otherwise the sound core creates a constraint which limits the rate to
the specified standard rates. That also made the rate constraint we were
already adding meaningless.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236059-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The buffer size register sets the size of the whole buffer, not just one
period. We actually handled it like that, except that the constraint was
set on the wrong parameter. The period size is implicitly constrained by
the buffer size and the fixed period count of 2.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236059-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We use independent voices for the channels, so we need to make an effort
to ensure that they are actually in sync.
The hardware doesn't provide atomicity, so we may need to retry a few
times, due to NMIs, PCI contention, and the wrong phase of the moon.
Solution inspired by kX-project.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236023-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For unclear reasons, the extra voice was set up with half the buffer
size instead of the period size. Commit 27ae958cf6 ("emu10k1 driver -
add multichannel device hw:x,3 [2-8/8]") mentions half-loop interrupts,
so maybe this was an artifact of an earlier iteration of the patch.
While at it, also fix periods_min of the regular playback - one period
makes just no sense.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523200709.236023-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Do not include pm_runtime.h header in files where APIs exported by
pm_runtime.h are not used.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> # for omap-mcbsp-st.c
Link: https://lore.kernel.org/r/20230517094903.2895238-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
... instead of passing in a high-level mixer struct. Let the
higher-level functions handle the differences between the voice types.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523104612.198884-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds snd_emu10k1_pcm_init_{voices,extra_voice}() and
snd_emu10k1_playback_{un,}mute_voices() to slightly abstract by voice
function and potential stereo property.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230523104612.198884-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230522105049.1467313-33-schnelle@linux.ibm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. However, in this case it seems those one-element
arrays have never actually been used as fake flexible arrays.
See this code that dates from Linux-2.6.12-rc2 initial git repository build
(commit 1da177e4c3 ("Linux-2.6.12-rc2")):
sound/pci/mixart/mixart_core.h:
215 struct mixart_stream_state_req
216 {
217 u32 delayed;
218 u64 scheduler;
219 u32 reserved4np[3];
220 u32 stream_count; /* set to 1 for instance */
221 struct mixart_flow_info stream_info; /* could be an array[stream_count] */
222 } __attribute__((packed));
sound/pci/mixart/mixart.c:
388
389 memset(&stream_state_req, 0, sizeof(stream_state_req));
390 stream_state_req.stream_count = 1;
391 stream_state_req.stream_info.stream_desc.uid_pipe = stream->pipe->group_uid;
392 stream_state_req.stream_info.stream_desc.stream_idx = stream->substream->number;
393
So, taking the code above as example, replace multiple one-element
arrays with simple object declarations, and refactor the rest of the
code, accordingly.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
This results in no differences in binary output.
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/296
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZGfiFjcL8+r3mayq@work
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of separate voices, we now allocate non-interleaved channels,
which may in turn contain two interleaved voices each. The higher-level
code keeps only one pointer per channel. The channels are not allocated
in one block any more, as there is no reason to do that. As a
consequence of that, and because it is cleaner regardless, we now let
the allocator store these pointers at a specified location, rather than
returning only the first one and having the calling code deduce the
remaining ones.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-8-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The voice allocator clearly knows about the field (it resets it), so
it's more consistent (and leads to less duplicated code) to have the
constructor take it as a parameter.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This allows us to drop the code that tries to preserve already allocated
voices upon repeated hw_param callback invocations. Getting it right for
multi-channel voices would otherwise get a bit hairy.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Eliminate the MIDI type, as there is no such thing - the MPU401 port
doesn't have anything to do with voices.
For clarity, differentiate between regular and extra voices.
Don't atomize the enum into bits in the table display.
Simplify/optimize the storage.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The subsequent allocation may still fail after freeing some voices, so
we shouldn't leave them in their programmed state.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On Audigy, the send amounts are merely targets, presumably to avoid
sound distortion due to sudden changes, which the EMU8K docu explicitly
warns about.
However, that "soft-start" would prevent bit-for-bit reproduction, so
we now force the current send amounts to their final values at PCM
playback init.
One might want to do that for the MIDI synthesizer as well, though it
seems mostly pointless due to the attack phase each note has anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140339.3722279-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CPF_CURRENTPITCH starts swerving towards PTRX_PITCHTARGET as soon as
that is set. In practice this means that CPF_FRACADDRESS may acquire a
non-zero value before we manage to force CPF_CURRENTPITCH to the final
value, which would prevent bit-for-bit reproduction.
To avoid that this state persists, we now reset CPF_FRACADDRESS when
setting CPF_CURRENTPITCH, and to (mostly) avoid that it progresses too
far in the first place (possibly even reaching CCCA_CURRADDR), we write
PTRX and CPF in one critical section (though NMIs, etc. still make this
unreliable).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140339.3722279-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make terminate_voice() actually do at all what it's supposed to do:
instantly and completely shut down the note.
The bogus behavior was mostly harmless, as usually the voice is freed
right afterwards, which implicitly terminates it anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140339.3722308-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Compensate for the cache delay, and actually populate the cache.
Without these, the playback would start with garbage (which would be
(mostly?) masqueraded by the attack phase).
Unlike for the PCM voices, this doesn't try to compensate for the
interpolator read-ahead, because it's pointless to be super-exact here.
Note that this code is probably still broken for particularly short
samples, because we ignore the loop-related parts of CCR. But I'm not
going to reverse-engineer that now ...
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140339.3722308-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
smatch reports
sound/pci/emu10k1/emumixer.c:519:39: warning: symbol
'emu1010_routing_info' was not declared. Should it be static?
sound/pci/emu10k1/emumixer.c:859:36: warning: symbol
'emu1010_pads_info' was not declared. Should it be static?
These variables are only used in their defining file, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518123826.925752-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While this nicely denoises the code, the real intent is being able to
write many registers pseudo-atomically, which will come in handy later.
Idea stolen from kX-project.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518093134.3697955-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We'd try to iterate the voices twice without resetting the pointer.
This went unnoticed, because the code isn't actually in use.
Amends commit 27ae958cf6 ("emu10k1 driver - add multichannel device
hw:x,3 [2-8/8]").
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518093047.3697887-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Handle the "timeout" (actually the retry counter) such that it's more
obvious and causes less cost in the normal case.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518093047.3697887-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove weird INTE_* clearing code. The bits were a subset of the
actually handled interrupts, which kind of contradicted the stated
purpose. I suppose it would make sense to complete the set and negate
it, but interrupts being enabled out of the blue is neither something
that happens a lot, nor should it result in just one error message, IMO.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518093047.3697887-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
IPR_CHANNELNUMBERMASK cannot be non-zero when IPR_CHANNELLOOP is unset,
so join marking them as handled.
This logically reverts part of commit f453e20d8a0 ("ALSA update
0.9.3a"), which made the inverse change with no explanation.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518093047.3697887-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The period_bytes_min parameter and the buffer_bytes minimum constraint
made no sense at all, as they didn't reflect any hardware limitation.
Instead, apply a frame-based period_size minimum constraint, which is
derived from the cache size (it would be actually possible to go below
that, but it would require special handling, and it would be practically
impossible to keep up with the IRQ rate anyway).
Sync up the constraints of the EFX playback with those of the regular
playback, as there is no reason for them to diverge.
N.b., the maximum buffer size is actually arbitrary - the hardware could
go waay beyond 128 KiB.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518092224.3696958-9-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull the special handling of extra voices out of
snd_emu10k1_pcm_init_voice(), simplify snd_emu10k1_playback_pointer(),
and make the logic overall clearer. Also, add verbose comments.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-9-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rename snd_emu10k1_playback_invalidate_cache() to the more apt
snd_emu10k1_playback_fill_cache(), and factor out
snd_emu10k1_playback_prepare_voices(), which calls the former for all
channels.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-8-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Originally, there was a 1:1 relationship between the PCM streams' and
the low-level voices' parameters. The addition of multi-channel playback
partially invalidated that, but didn't introduce proper layering, so
things kept working only by virtue of the multi-channel device never
having two channels (yet). The upcoming addition of 32-bit playback
would complete upending the relationships.
So this patch detaches the low-level parameters from the high-level
ones: we pass pre-calculated bit width and stereo flags to the low-level
manipulation functions instead of calculating them in-place from the
stream parameters.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The cache causes a fixed delay regardless of stream parameters.
Consequently, all that "cache invalidate size" calculation stuff was
garbage (which can be traced right back to Creative's OSS driver).
This also removes the definitions of registers CD1..CDF, because they
are accessed only relative to CD0 anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Given that the data is going to be ignored anyway, and that the cache
does not influence interrupt timing (which is the purpose of the extra
voices), it's pointless to pre-fill the cache.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The idea is to make the extra voice lag behind the "real" voices, but
moving the buffer address around doesn't contribute to that, as the CCCA
write below uses the same address. The exact address is unimportant, as
the data is discarded anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This workaround fails to address the underlying problem, which is
actually wholly self-made. Subsequent patches will fix it.
This reverts commit 56385a12d9.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230517174256.3657060-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Shrink the {in,out}put_source arrays and their data type to what is
actually necessary.
To be still on the safe side, add some static asserts.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-11-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unlike the other models, this is actually a distinct card, rather than
an E-MU 1010 with different "dongles". It is stereo only, and supports
no ADAT (there is no trace of ADAT in the manual, switching the output
mode to ADAT has no effect, and switching the input mode to ADAT just
breaks input (presumably ... my only ADAT source is the card's output)).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-10-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The more card models are handled separately, the more code duplication
this saves.
add_emu1010_source_mixers() is factored out the save duplication in a
later commit.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-8-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
... and move it to the mixer init, as it's logically part of it.
As a side effect, this fixes the initial values of the input destination
mixer controls, which would have previously remained at "Silent" despite
different defaults. This didn't really matter, though, as ALSA state
restoration would hide that bug beyond first use.
Note that this completely does away with clearing the output routing
registers, as it was rather pointless - we just programmed the FPGA
(resetting it first if necessary), so everything is zeroed anyway
(that's documented by Xilinx, and as further evidence, some of the loops
terminated too early, and we didn't bother clearing the high channels of
the input routes at all, all with no observed adverse effects).
As a drive-by, this also fixes some capture channel defaults - any
EMU_SRC_*2 isn't a sensible value in 1x clock mode.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of hard-coding the card-specific arrays and their sizes in each
function, use a more data-driven approach.
As a drive-by, also hide the unavailable I2S input destinations on the
1616 cardbus card.
Also as a drive-by, use more assignments at variable declaration for
brevity. This also removes the pointless masking of kctl.private_value.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Define arrays of strings instead of snd_kcontrol_new.
While at it, move the E-MU source & destination enum defs next to their
hardware defs, which is a lot more logical and will come in handy in a
followup commit. And add some static asserts to verify that the array
sizes match.
This also applies the compactization from the previous commit to the
destination registers.
While reshuffling the arrays anyway, switch the order of the HAMOA_DAC
& HANA_SPDIF output destinations for the 1010 card, so they follow a
more regular pattern. This should have no functional impact.
The code is somewhat de-duplicated by the extraction of add_ctls().
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use macros to avoid duplication. Arguably, this is somewhat less
legible, but future additions would grow this part of the file to
completely unmanageable dimensions.
The EMU*_COMMON_TEXTS macros will save duplication in a future commit;
I pulled them ahead to reduce churn.
While rewriting the tables anyway, rearrange them such that each card's
strings and registers are adjacent.
Also, add some static asserts to verify that the array sizes match.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many registers are meaningless for stereo slaves and the extra voices.
This patch cleans up these unnecessary register writes.
snd_emu10k1_playback_{trigger,stop}_voice() is not called for stereo
slaves any more.
snd_emu10k1_playback_prepare_voice() is renamed to
snd_emu10k1_playback_unmute_voice(), as this better reflects its
remaining function. It's not called for the extra voices any more.
Accordingly, snd_emu10k1_playback_mute_voice() is factored out from
snd_emu10k1_playback_stop_voice(), and is called selectively as well.
This doesn't add conditionals which would avoid initializing
sub-registers, as that wouldn't pull its weight.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536451-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We now enable ints even before triggering, and disable them only after
stopping - otherwise there is a race condition we may plausibly run into
when we pause/resume near the end of the buffer.
Updating the epcm->running flag is moved the same way, as it affects the
*_pointer() functions, which are called by the interrupt handler.
Also, factor these out to own functions, for clarity.
For multi-channel, the extra voice is now triggered after all regular
voices - we wouldn't want to receive an int before all channels have
passed the period boundary.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536451-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We initialize them at card init and don't touch them later, so there is
no need to reset them again at voice start.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536451-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We (rightfully) don't enable the envelope engine for PCM voices, so any
related setup is entirely pointless - the EMU8K documentation makes that
very clear, and the fact that the various open drivers all use different
values to no observable detriment pretty much confirms it.
The remaining initializations are regrouped for clarity.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536451-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mixer structures were filled in two places: on driver init, and when
the devices are opened. The latter made the former pointless, so we
remove the former. This implies that mixer dumps may now return all
zeroes, which is OK, as restoring them is meaningless as well.
Things were even weirder for the (generally unused) secondary sends:
Some of the initialization loops were forgotten when support for Audigy
was added, thus creating the technically illegal state of multiple sends
being routed to the same FX accumulator (though it apparently doesn't
matter when the amount is zero).
The global multi-channel init used some rather bizarre values for the
secondary sends, and the init on open actually forgot to re-initialize
them. We now use a not really more useful, but simpler formula.
The direct register init was also bogus. This doesn't really matter, as
the value is overwritten when a voice comes into use, but still.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536451-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These IDs are for AD102, AD103, AD104, AD106, and AD107 gpus with
audio functions that are largely similar to the existing ones.
Tested audio using gnome-settings, over HDMI, DP-SST and DP-MST
connections on AD106 gpu.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230517090736.15088-1-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_cs46xx_download_image() was originally called from dsp_spos.c, but
is now local to cs46xx_lib.c. Mark it as 'static' to avoid a warning
about it lacking a declaration, and '__maybe_unused' to avoid a warning
about it being unused when CONFIG_SND_CS46XX_NEW_DSP is disabled:
sound/pci/cs46xx/cs46xx_lib.c:534:5: error: no previous prototype for 'snd_cs46xx_download_image'
Fixes: 89f157d9e6 ("[ALSA] cs46xx - Fix PM resume")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516195046.550584-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
get_line_out_pfx() may trigger an Oops by overflowing the static array
with more than 8 channels. This was reported for MacBookPro 12,1 with
Cirrus codec.
As a workaround, extend for the 9.1 channels and also fix the
potential Oops by unifying the code paths accessing the same array
with the proper size check.
Reported-by: Olliver Schinagl <oliver@schinagl.nl>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/64d95eb0-dbdb-cff8-a8b1-988dc22b24cd@schinagl.nl
Link: https://lore.kernel.org/r/20230516184412.24078-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The voice volume is a raw fractional multiplier that can't actually
represent 1.0. To still enable real pass-through, we now set the volume
to 0.5 (which results in no loss of precision, as the FX bus provides
fractional values) and scale up the samples in DSP code.
To maintain backwards compatibility with existing configuration files,
we rescale the values in the mixer controls. The range is extended
upwards from 0xffff to 0x1fffd, which actually introduces the
possibility of specifying an amplification.
There is still a minor incompatibility with user space, namely if
someone loaded custom DSP code. They'll just get half the volume, so
this doesn't seem like a big deal.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230514170323.3408834-8-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fractional multiplication with the maximal value 2^31-1 causes some tiny
distortion. Instead, we want to multiply with the full 2^31. The catch
is of course that this cannot be represented in the DSP's signed 32 bit
registers.
One way to deal with this is to encode 1.0 as a negative number and
special-case it. As a matter of fact, the SbLive! code path already
contained such code, though the controls never actually exercised it.
A more efficient approach is to use negative values, which actually
extend to -2^31. Accordingly, for all the volume adjustments we now use
the MAC1 instruction which negates the X operand.
The range of the controls in highres mode is extended downwards, so -1
is the new zero/mute. At maximal excursion, real zero is not mute any
more, but I don't think anyone will notice this behavior change. ;-)
That also required making the min/max/values in the control structs
signed. This technically changes the user space interface, but it seems
implausible that someone would notice - the numbers were actually
treated as if they were signed anyway (and in the actual mixer iface
they _are_). And without this change, the min value didn't even make
sense in the first place (and no-one noticed, because it was always 0).
Tested-by: Jonathan Dowland <jon@dow.land>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230514170323.3408834-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The microphone capture device is a feature of the AC97 codec, so its
availability should be coupled to the presence of that codec.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230514170323.3408834-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The E-MU cards don't try very hard to be Sound Blasters. All sound I/O
goes through the Hana FPGA, thus making the regular extin/out controls
useless. Still showing them just serves to clutter up the interface and
confuse the user.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230514170323.3408834-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
User space could pass arbitrary ranges, which were uncritically
accepted. This could lead to table lookups out of range.
I don't think that this is a security issue, as it only allowed someone
with CAP_SYS_ADMIN to crash the kernel, but still.
Setting an invalid translation mode will also be rejected now. That did
no harm, but it's still better to detect errors.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230514170323.3408834-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Pull ahead all fixed allocations, so we don't rely on the semi-
dynamic ones not crossing the arbitrarily determined limit
- Use an enum for the fixed allocations
- Stop arbitrarily wasting registers on unexplained "reservations"
- Don't reserve two regs for the master volume control - it's mono
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230514170323.3408834-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rather than applying masks to the provided values, make assertions
about them being valid - otherwise we'd just try to paper over bugs.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230514170323.3408798-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There's yet another laptop that needs the fixup to enable mute and
micmute LEDs. So do it accordingly.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230512083417.157127-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Pavilion 15 line has B&O top speakers similar to the x360 and
applying the same profile produces good sound. Without this, the
sound would be tinny and underpowered without either applying
model=alc295-hp-x360 or booting another OS first.
Signed-off-by: Ryan Underwood <nemesis@icequake.net>
Fixes: 563785edfc ("ALSA: hda/realtek - Add quirk entry for HP Pavilion 15")
Link: https://lore.kernel.org/r/ZF0mpcMz3ezP9KQw@icequake.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of using lots of instructions to mix wet and dry signals,
simply skip over the whole code block if tone control is disabled.
This also allows us doing away with the "shadow" playback channels.
Tested-by: Jonathan Dowland <jon@dow.land>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230510173917.3073107-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Evidently, the channel delay bug exists in all E-MU cards; it's in the
Hana FPGA program, and was never fixed.
Note that the implementation is somewhat lazy - to localize the code
paths, we actually waste a GPR and a DSP instruction by keeping two
delay registers for the same physical source.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230510173917.3073107-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of spending lots of instructions on masking and transplanting
the sign bit, sidestep the issue by replacing the last bit shift with
a wrapping addition to self.
Solution stolen from kX-project, after I pondered other ideas first.
Also, the function really doesn't need to return a constant int value.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230510173917.3073107-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Presumably, JDC added the seemingly superfluous indirection over the
temporary register because without it he'd get only zero readings.
However, switching the X and Y operands (or using EMU32 as the A
operand in the temporary load) works just fine. Presumably a DSP bug?
The original code was also actually buggy, though: both channels used
the left volume control.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230510173917.3073107-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It controls the whole surround set, so stereo can't work. As a
consequence, only the left channel was paid attention to.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230510173917.3073107-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These models use 2 CS35L41 amplifiers using SPI for down-facing
speakers.
alc285_fixup_speaker2_to_dac1 is needed to fix volume control of the
down-facing speakers.
Pin configs are needed to enable headset mic detection.
Note that these models lack the ACPI _DSD properties needed to
initialize the amplifiers. They can be added during boot to get working
sound out of the speakers:
https://gist.github.com/lamperez/862763881c0e1c812392b5574727f6ff
Signed-off-by: Alexandru Sorodoc <ealex95@gmail.com>
Link: https://lore.kernel.org/r/20230511161510.315170-1-ealex95@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for HP EliteBook 835/845/845W/865 G10 laptops
with CS35L41 amplifiers on I2C/SPI bus connected to Realtek codec.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230510142227.32945-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Fix mixer source port names. These will require some users to
re-adjust their mixer settings, which seems acceptable:
- The S/PDIF port is on the main 1010 card, not the 0202 daughter card
- The 1616m CardBus card has all inputs on the dock, so there is
no point in specifying it
- Conversely, the 1010 card has "dispersed" inputs, so say where the
ADAT port is, consistently with the S/PDIF port
- The 1616m CardBus card is actually named E-MU 02 (due to the headphone
output jack it has)
- Fix capitalization of "E-MU"
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230428095941.1706335-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit 5bbb1ab5bd ("control: use counting semaphore as write lock
for ELEM_WRITE operation"), mixer values have been fully read-write
locked. This means that it is now unnecessary to apply any additional
locks to values that are accessed solely by mixer callbacks. Values that
are read outside mixer callbacks still need write locking. There are no
cases of mixer values being written outside mixer callbacks, so no read
locks remain in mixer callbacks.
Note that the removed locks refer only to the emu data structure, not
the card's registers as the lock's name suggests.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230428095941.1706278-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The function does read-modify-write cycles on the card's registers, and
doesn't access mutable members of the emu data structure.
I suppose this might have been a mixup due to the lock names being
logically swapped.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230428095941.1706278-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Contrary to its name, reg_lock locks the emu data structure, not the
registers. As the functions access only data which is set once at card
initialization, there is no point in locking it.
Actually locking the registers would be pointless as well, as
snd_emu10k1_intr_{en,dis}able() does its own locking, and TIMER is
accessed only in this one place.
Locking snd_emu10k1_timer_{start,stop}() against each other also
wouldn't buy us anything; the functions interleaving their I/O accesses
wouldn't introduce new problems.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230428095941.1706278-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here are collections of small fixes for rc1.
The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most
of it was merely a code shuffling.
Another significant change here is for ALSA PCM core; it received a
revert and a series of fixes for PCM auto-silencing where it caused
a regression in the previous PR for rc1.
Others are all small: ASoC Intel fixes, various quirks for ASoC AMD,
HD-audio and USB-audio, the continued legacy emu10k1 code cleanup,
and some documentation updates.
-----BEGIN PGP SIGNATURE-----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=jd8l
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for rc1.
The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most of
it was merely a code shuffling.
Another significant change here is for ALSA PCM core; it received a
revert and a series of fixes for PCM auto-silencing where it caused a
regression in the previous PR for rc1.
Others are all small: ASoC Intel fixes, various quirks for ASoC AMD,
HD-audio and USB-audio, the continued legacy emu10k1 code cleanup, and
some documentation updates"
* tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: pcm: use exit controlled loop in snd_pcm_playback_silence()
ALSA: pcm: simplify top-up mode init in snd_pcm_playback_silence()
ALSA: pcm: playback silence - move silence variable updates to separate function
ALSA: pcm: playback silence - remove extra code
ALSA: pcm: fix playback silence - correct incremental silencing
ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the threshold mode
ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()"
ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop
ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init`
ALSA: usb-audio: Add quirk for Pioneer DDJ-800
ALSA: hda/realtek: support HP Pavilion Aero 13-be0xxx Mute LED
ASoC: Intel: soc-acpi-cht: Add quirk for Nextbook Ares 8A tablet
ASoC: amd: yc: Add Asus VivoBook Pro 14 OLED M6400RC to the quirks list for acp6x
ASoC: codecs: wcd938x: fix accessing regmap on unattached devices
ALSA: docs: Fix code block indentation in ALSA driver example
ALSA: docs: Extend module parameters description
ALSA: hda/realtek: Add quirk for ASUS UM3402YAR using CS35L41
ALSA: emu10k1: use more existing defines instead of open-coded numbers
ASoC: amd: yc: Add ASUS M3402RA into DMI table
ALSA: hda/realtek: Add quirk for ThinkPad P1 Gen 6
...
There's another laptop that needs the fixup to enable mute and micmute
LEDs. So do it accordingly.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230505125925.543601-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds support for the mute LED on the HP Pavilion Aero Laptop
13-be0xxx. The current behavior is that the LED does not turn on at any
time and does not indicate to the user whether the sound is muted.
The solution is to add a PCI quirk to properly recognize and support the
LED on this device.
This change has been tested on the device in question using modified
versions of kernels 6.0.7-6.2.12 on Arch Linux.
Signed-off-by: Caleb Harper <calebharp2005@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230503175026.6796-1-calebharp2005@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This Asus Zenbook laptop uses Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with External Boost.
Signed-off-by: Mark Asselstine <asselsm@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230501231346.54979-1-asselsm@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Using the *_MASK defines for "maximal value" is debatable. I got the
idea from FreeBSD, and it sorta makes sense to me.
Some hunks look a bit incomplete, because code that is going to be
subsequently removed is not touched here.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230428080732.1697695-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A fairly standard release for SPI with the exception of a change to the
API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily for
a while. There's also a new API to allow us to TPM chips on half duplex
controllers.
There's three commits in here that were mangled by a bad interaction
between the alsa-devel mailing list software and b4, I didn't notice
until there were merges on top with it being SPI not ALSA. It seemed
clear enough to not be worth going back and fixing.
- Refactoring in preparation for supporting multiple chip selects for a
single device, needed by some flash devices, which required a change
in the SPI device API visible throughout the tree.
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI.
- Optimisation for large transfers on fsl-cpm devices.
- Cleanups around device property use which fix some sisues with
fwnode.
- Use of both void remove() and devm_platform_.*ioremap_resource().
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI.
The final commit converting to DEV_PM_OPS() was applied late to fix a
warning that was introduced by some of the earlier work.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRIFQgACgkQJNaLcl1U
h9BJOwf+JF2RySdn5g1LsyTndPZhLfw4iJgTHaMlnv5tiPHvYVYMM/mNMbMr5Znh
Y2T0OUkzuRfOK273C+hItC1bTYFTa2cEbDb5dpmKBOZdQ3hjGsZQBvuH2bScUQ+a
H7UgD3FYOJST6k6rRgZQxVMPePFrXAOaO1gmFWTR3v1EcEr2JeQnjZsmymFXcTnc
CtPg9N3RvhVnq5aXuxSgQeyyKIjo4LJh/eZ2mexPIu0DeUq3MftaWwSwCXFIoeNC
DMLA4mZWTgf/yt6JUALwLr+bIiJjb4qGjp3xGZ2wmX7zn73f9QQvuunKb1V4zbNF
EdXLo2VjA9cZjsihenBaKeHnkfgNfA==
=IRqY
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A fairly standard release for SPI with the exception of a change to
the API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily
for a while.
There's also a new API to allow us to support TPM chips on half duplex
controllers.
Summary:
- Refactoring in preparation for supporting multiple chip selects for
a single device, needed by some flash devices, which required a
change in the SPI device API visible throughout the tree
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI
- Optimisation for large transfers on fsl-cpm devices
- Cleanups around device property use which fix some sisues with
fwnode
- Use of both void remove() and devm_platform_.*ioremap_resource()
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI"
* tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits)
spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: tegra210-quad: Enable TPM wait polling
spi: Add TPM HW flow flag
spi: bcm63xx: remove PM_SLEEP based conditional compilation
spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: spi-cadence: Add support for Slave mode
spi: spi-cadence: Switch to spi_controller structure
spi: cadence-quadspi: fix suspend-resume implementations
spi: dw: Add support for AMD Pensando Elba SoC
spi: dw: Add AMD Pensando Elba SoC SPI Controller
spi: cadence-quadspi: Disable the SPI before reconfiguring
spi: cadence-quadspi: Update the read timeout based on the length
spi: spi-loopback-test: Add module param for iteration length
spi: add support for Amlogic A1 SPI Flash Controller
dt-bindings: spi: add Amlogic A1 SPI controller
spi: fsl-spi: No need to check transfer length versus word size
spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void
spi: fsl-cpm: Use 16 bit mode for large transfers with even size
spi: fsl-spi: Re-organise transfer bits_per_word adaptation
spi: fsl-spi: Fix CPM/QE mode Litte Endian
...
At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmRJBkcOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE8S/Q/+If1MEW+XXYushYU6VcWbHevwsRwmUZPtIJzT
Nx4PE4Ia8rX++GbsH5Iqt6tmldbb/vMbwy7TGbn/Q4ju2cO5qGT4/qgWdC2TuUX6
icWRHslJ//TffSd/yh1g6JIKBlcCmQeYcw5KoaLzBE/qO3iRP0IQUc17gkLKYNni
u1XOGrU9zuh3uwz+UQFfUhB8NlKhD3HVYjwrbd3gwcDsE/0G+q76A/wWghfA+RAb
0ruDhIDtJoem6PKQTwC05UgDpmwd7XFAIgcbOu7E7t/lr4YKwQZhQmJI0IexCR9i
aLPqg3Q/6S+WFKpcPcGCHNljqRNp9lUlIXak+NsbCZ7mXKE6tALywAtuB57sZ0sO
QM1YrmUAsi0RaD7foPcT64CAq8IVQ6aLWusXwvcxzzvJuHvJdeiBKiI5gmF0GqMu
ZLpAMGCoKxft4Il2r+BPTbLHe57uHmp1fKMWUK4NfyIUW7jEdKmf7ALSSJmvcqwU
+R0PXikc0lOo1GH9ZQojpVNFwV8XLOd2CWaNfoPl85A0+ngYhTY3ZRQ3qbYWHlU6
zXAu06IUOef5phsn3zerJ1orV729Xdjf+JUbL0uxJvANsX6R93CQWw0tgrUI62EZ
0vhoOp3PPZUKmDKvUo/NtIyuvSGREg3wDug5tiDOb53Qwfr2VIThJa999kNzH76c
lHUfrv4=
=7XGG
-----END PGP SIGNATURE-----
Merge tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including
addition of a no-DSP mode for bringup, HDA MLink and extensions to
the IPC4 protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas
R-Car Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements"
* tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits)
ALSA: emu10k1: use high-level I/O in set_filterQ()
ALSA: emu10k1: use high-level I/O functions also during init
ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()
ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx()
ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP
ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards
ALSA: emu10k1: fixup DSP defines
ALSA: emu10k1: pull in some register definitions from kX-project
ALSA: emu10k1: remove some bogus defines
ALSA: emu10k1: eliminate some unused defines
ALSA: emu10k1: fix lineup of EMU_HANA_* defines
ALSA: emu10k1: comment updates
ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards
ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field
ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()
ALSA: emu10k1: minor optimizations
ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()
ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads
ALSA: emu10k1: remove apparently pointless FPGA reads
ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()
...
Add a set of HD Audio PCI IDS, and the HDMI codec vendor IDs for
Glenfly Gpus.
- In default_bdl_pos_adj, set bdl to 128 as Glenfly Gpus have hardware
limitation, need to increase hdac interrupt interval.
- In azx_first_init, enable polling mode for Glenfly Gpu. When the codec
complete the command, it sends interrupt and writes response entries to
memory, howerver, the write requests sometimes are not actually
synchronized to memory when driver handle hdac interrupt on Glenfly Gpus.
If the RIRB status is not updated in the interrupt handler,
azx_rirb_get_response keeps trying to recevie a response from rirb until
1s timeout. Enabling polling mode for Glenfly Gpu can fix the issue.
- In patch_gf_hdmi, set Glenlfy Gpu Codec's no_sticky_stream as it need
driver to do actual clean-ups for the linked codec when switch from one
codec to another.
Signed-off-by: jasontao <jasontao@glenfly.com>
Signed-off-by: Reaper Li <reaperlioc@glenfly.com>
Link: https://lore.kernel.org/r/20230426013059.4329-1-reaperlioc@glenfly.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The bulk of the commits here are for the conversion of drivers to use
void remove callbacks but there's a reasonable amount of other stuff
going on, the pace of development with the SOF code continues to be high
and there's a bunch of new drivers too:
- More core cleanups from Morimto-san.
- Update drivers to have remove() callbacks returning void, mostly
mechanical with some substantial changes.
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol.
- Hibernation support for CS35L45.
- More DT binding conversions.
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRGdEsACgkQJNaLcl1U
h9BNVAf+Ijupg3dhAl6847v1PRYXkYK6YjAayhNd0xRoRePKnnv1zkrsXSBzxZUM
8KHpQDUJyfQbPnE2JRmr1WfHSoNDl/NXdJl+lefPBgol5bzxRji68hDPGjA0645o
R6vzrqLNw8mh3jwptXfEpQfKH8tIvwOeMeLkncDvsm0ZCUR2GhYnjB1g82ih0ssx
lvh36PdCRF0e/ruHxkiVn9b/riID65oTRkN6IxJqoPnqJZVyCiqmiJcfWePpaPir
4R9Dyk+REos/aCLdne1g6H21Tgi0td+blv6empqwdEXG41VSdRMTrOZb1ZISKmpF
ggPbKsk9BjJFBCewllHXJ0YEcBp9/g==
=TVxt
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.4
The bulk of the commits here are for the conversion of drivers to use
void remove callbacks but there's a reasonable amount of other stuff
going on, the pace of development with the SOF code continues to be high
and there's a bunch of new drivers too:
- More core cleanups from Morimto-san.
- Update drivers to have remove() callbacks returning void, mostly
mechanical with some substantial changes.
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol.
- Hibernation support for CS35L45.
- More DT binding conversions.
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733.
These functions don't actually touch the DSP until they poke the code
into it, at which point it's temporarily stopped anyway. And fx8010.dbg
is already zero anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1144004-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Use correct address limit for Audigy
- Use the right constant to actually make a step on Audigy
- Don't store *_DBG_STEP and the address in emu->fx8010.dbg, as
otherwise unrelated operations would make steps, too
This is untested. as10k1 was never ported to Audigy anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1144004-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The rev2 cards use CA0108, but the embedded P17V goes entirely unused.
Also, A_IOCTL (which is really the GPIO port) is actually the FPGA
control port, so messing with it is no good idea.
The hacks are actually mutually exclusive, so make that explicit while
we're at it.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143888-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For documentation purposes and later use.
Some pre-existing but (mostly) unused definitions were renamed for
consistency.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Firstly, remove the FXWC_* defines - the comment on FXWC implies that
the relevant defines are the (A_)EXTOUT_* ones. It's unclear where this
came from - it was in the initial ALSA import, but neither the driver
from Creative nor kX-project have these defines.
Secondly, remove A_HR, which made plain no sense (was unused, and
clashed with FXRT). Amends commit cbb7d8f9b7 ("emu10k1: Update
registers defines for the Audigy 2/emu10k2.5").
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move comments to better locations, de-duplicate, fix/remove incorrect/
outdated ones, add new ones, and unify spacing somewhat.
While at it, also add testing credits for Jonathan Dowland (SB Live!
Platinum) and myself (E-MU 0404b).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unlike the Alice2 chips used on 1st generation E-MU cards, the
Tina/Tina2 chips used on the 2nd gen cards have only six GPIN pins,
which means that we need to use a smaller mask. Failure to do so would
falsify the read data if the FPGA tried to raise an IRQ right at that
moment. This wasn't a problem so far, as we didn't actually enable FPGA
IRQs, but that's going to change soon.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422132430.1057490-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- In snd_emu10k1_look_for_ctl(), evaluate the cheap condition first
- In _snd_emu10k1_{audigy_,}init_efx(), don't use expensive bit setting
loops to fill arrays
- In snd_emu_proc_ptr_reg_read(), remove useless condition - iobase can
be only 0 or 0x20
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422121519.1052813-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These seem to be another instance of cargo-culting from the Windows
driver. It presumably queries the register to decide about the followup
actions, but we don't do that.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These seem to be simply cargo-culted from the Windows driver's behavior.
However, the original reason were presumably read-modify-write cycles,
which we don't do.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This doesn't do anything snd_emu10k1_init() wouldn't do later, and none
of the things it does seem relevant for the function itself (which is
pretty much about setting up the FPGA). It was probably a Windows
driver behavior cargo-culting artifact.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As the register definition clearly states, this is a 16-bit register,
yet we did all accesses as 32-bit. The writes in particular would have
the potential to clear the TIMER register (depending on how the bus/card
actually handles the too long writes).
This commit also introduces a separate define A_GPIO which aliases
A_IOCFG, which better reflects the distinct usage on E-MU cards.
This is done in the same commit to keep the churn down, as we're
touching all involved lines anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Assert the validity of the registers and values, as them being out of
range would indicate an error in the driver. Consequently, don't bother
returning error codes; they were ignored everywhere anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Detach it better from the main PCM driver, which it really doesn't have
much in common with.
In particular, this moves the interrupt handler implementation into
p16v.c, and makes it access the substream runtime status more directly,
so it doesn't need to abuse structs snd_emu10k1_pcm and
snd_emu10k1_voice any more.
We don't need private pcm runtime data at all, as the only thing it was
used for (except the back-link to the substream) was the `running` flag.
So store that directly in runtime->private_data.
This somewhat radical strip-down shows that this driver contains some
complexity that was never actually utilized. I suppose the right way to
fully utilize the hardware in a simple way would be introducing more
substreams. This wouldn't require any of the removed code.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005452-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
extin_mask and extout_mask are used only by the SbLive! microcode, so
they have no effect on Audigy.
Eliminate fxbus_mask entirely, as it wasn't actually used for anything.
As a drive-by, remove the pointless pad1 field from struct
snd_emu10k1_fx8010 - it is not visible to user space, so it has no
binary compatibility constraints.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005509-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP ProBook 455 G10 which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230420035942.66817-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unfortunately, the tester gave a weak feedback (working/non-working) for
this case. After the double confirmation, this change is not really required.
The standard code with alc269_fallback_pin_fixup_tbl should work on this
hardware.
Fixes: 5911d78fab ("ALSA: hda/realtek: Improve support for Dell Precision 3260")
Fixes: 5f4efc9dfc ("ALSA: hda/realtek: Fix support for Dell Precision 3260")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230419081121.304846-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These Lenovo laptops use Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with External Boost.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230412160531.182007-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The newer E-MU cards weren't mentioned at all.
The "partially supported" is removed ahead of it becoming mostly untrue.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230405201220.2197908-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It could have never worked, as snd_emu10k1_fx8010_playback_prepare() and
snd_emu10k1_fx8010_playback_hw_free() assume the emu10k1 offset for the
ETRAM, and the default DSP code includes no handler for it. It also
wouldn't make a lot of sense to make it work, as Audigy has an own, much
simpler, pass-through mechanism. So just skip creation of the device.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197938-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Due to two copy/pastos, closing the MIC or EFX capture device would
make a running ADC capture hang due to unsetting its interrupt handler.
In principle, this would have also allowed dereferencing dangling
pointers, but we're actually rather thorough at disabling and flushing
the ints.
While it may sound like one, this actually wasn't a hypothetical bug:
PortAudio will open a capture stream at startup (and close it right
away) even if not asked to. If the first device is busy, it will just
proceed with the next one ... thus killing a concurrent capture.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197923-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The BIOS botches this one completely - it says the 2nd S/PDIF output is
used, while in fact it's the 1st one. This is tested on DP45SG, but I'm
assuming it's valid for the other boards in the series as well.
Also add some comments regarding the pins.
FWIW, the codec is apparently still sold by Tempo Semiconductor, Inc.,
where one can download the documentation.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the other boards from the D*45* series, this one sets up the
outputs not quite correctly.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a DRM driver turns on or off the screen with the audio
capability, it notifies the ELD to HD-audio HDMI codec driver via
component ops. HDMI codec driver, in turn, attaches or detaches the
PCM stream for the given port on the fly.
The problem is that, since the recent code change, the HDMI driver
always treats the PCM stream assignment dynamically; this ended up the
confusion of the PCM device appearance. e.g. when a screen goes once
off and on again, it may appear on a different PCM device before the
screen-off. Although the application should treat such a change, it
doesn't seem working gracefully with the current pipewire (maybe
PulseAudio, too).
As a workaround, this patch changes the HDMI codec driver behavior
slightly to be more consistent. Now it remembers the previous PCM
slot for the given port and try to assign to it. That is, if a port
is re-enabled, the driver tries to use the same PCM slot that was
assigned to that port previously. If it conflicts, a new slot is
searched and used like before, instead.
Note that multiple monitor connections are the only typical case where
the PCM slot preservation is effective. As long as only a single
monitor is connected, the behavior isn't changed, and the first PCM
slot is still assigned always.
Fixes: ef6f5494fa ("ALSA: hda/hdmi: Use only dynamic PCM device allocation")
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217259
Link: https://lore.kernel.org/r/20230331142217.19791-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP ProBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230331083242.58416-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
clang with W=1 reports
sound/pci/asihpi/hpi6000.c:1256:6: error: variable
'loop_count' set but not used [-Werror,-Wunused-but-set-variable]
u32 loop_count = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230326205712.1358918-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There's no need to switch between unsigned short and u16, especially since
all the functions that end up using old_legacy_ctrl specify u16 anyway.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329043627.178899-1-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
YMF744 and newer store the base IO ports in separate PCI config registers.
Since these registers were not restored, when set to a non-default value,
features that rely on them (FM, MPU401, gameport) were not functional
after restore, as their respective IO ports were reset to their defaults.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329041440.177363-5-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for storing more than two legacy PCI registers, the
existing ones are moved into a new array.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329041440.177363-4-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The registers were previously allocated when CONFIG_PM_SLEEP was set,
however this only saved an insignificant amount of memory otherwise.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329041440.177363-3-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit 1a3c7bb088 ("PM: core: Add new *_PM_OPS macros, deprecate
old ones") SIMPLE_DEV_PM_OPS has been marked deprecated.
The intent is to remove CONFIG_PM_SLEEP guards for PM callbacks. As such
the ifdefs are now removed.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329041440.177363-2-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As an end user, it can be confusing to request an arbitrary IO port be
used only to find out that it doesn't work without an obvious reason,
especially since /sys/module/snd_ymfpci/parameters/{fm,joystick,mpu}_port
indicate 0 after the module has been loaded.
In my case, I was unaware that the YMF724 did not support such usage, and
thus ended up spending time attempting to debug the issue.
Now, when a user attempts to request an IO port that isn't supported by
the hardware, the following message is printed:
[ 25.549530] snd_ymfpci 0000:06:05.0: The Yamaha DS-1 (YMF724F) does not support arbitrary IO ports for FM (requested 0x1234)
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329034204.171901-1-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
clang with W=1 reports
sound/pci/rme9652/hdspm.c:6149:19: error: unused function
'copy_u32_le' [-Werror,-Wunused-function]
static inline int copy_u32_le(void __user *dest, void __iomem *src)
^
This function is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230323202713.2637150-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unfortunately, in commit 5911d78fab a wrong codec patch was selected.
The model=alc283-dac-wcaps is equivalent to ALC283_FIXUP_CHROME_BOOK not
ALC295_FIXUP_CHROME_BOOK.
Fixes: 5911d78fab ("ALSA: hda/realtek: Improve support for Dell Precision 3260")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230322153404.386473-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent commit f83bb25924 ("ALSA: hda/conexant: Add quirk for
LENOVO 20149 Notebook model") introduced a quirk for the device with
17aa:3977, but this caused a regression on another model (Lenovo
Ideadpad U31) with the very same PCI SSID. And, through skimming over
the net, it seems that this PCI SSID is used for multiple different
models, so it's no good idea to apply the quirk with the SSID.
Although we may take a different ID check (e.g. the codec SSID instead
of the PCI SSID), unfortunately, the original patch author couldn't
identify the hardware details any longer as the machine was returned,
and we can't develop the further proper fix.
In this patch, instead, we partially revert the change so that the
quirk won't be applied as default for addressing the regression.
Meanwhile, the quirk function itself is kept, and it's now made to be
applicable via the explicit model=lenovo-20149 option.
Fixes: f83bb25924 ("ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model")
Reported-by: Jetro Jormalainen <jje-lxkl@jetro.fi>
Link: https://lore.kernel.org/r/20230308215009.4d3e58a6@mopti
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230320140954.31154-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
clang with W=1 reports
sound/pci/ymfpci/ymfpci_main.c:34:18: error:
unused function 'snd_ymfpci_readb' [-Werror,-Wunused-function]
static inline u8 snd_ymfpci_readb(struct snd_ymfpci *chip, u32 offset)
^
This static function is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230318132708.1684504-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
tuning_ctl_set() might have buffer overrun at (X) if it didn't break
from loop by matching (A).
static int tuning_ctl_set(...)
{
for (i = 0; i < TUNING_CTLS_COUNT; i++)
(A) if (nid == ca0132_tuning_ctls[i].nid)
break;
snd_hda_power_up(...);
(X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...);
snd_hda_power_down(...); ^
return 1;
}
We will get below error by cppcheck
sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12
for (i = 0; i < TUNING_CTLS_COUNT; i++)
^
sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds
dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20,
^
This patch cares non match case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfe9eap7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://lore.kernel.org/r/20230310173217.3429788-9-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
CONTROLLER_IN_GPU() is clearly intended to match only Intel devices, but
previously it checked only the PCI Device ID, not the Vendor ID, so it
could match devices from other vendors that happened to use the same Device
ID.
Update CONTROLLER_IN_GPU() so it matches only Intel devices.
Fixes: 535115b5ff ("ALSA: hda - Abort the probe without i915 binding for HSW/B")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307214054.886721-1-helgaas@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Samsung Galaxy Book2 Pro (13" 2022 NP930XED-KA1DE) with codec SSID
144d:c868 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 code.
Signed-off-by: Hamidreza H. Fard <nitocris@posteo.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230307163741.3878-1-nitocris@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP platform needs ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED quirk to
make mic-mute/audio-mute/speaker working.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230307135317.37621-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Shared boost allows two amplifiers to share a single boost circuit by
communicating on the MDSYNC bus.
The passive amplifier does not control the boost and receives data from
the active amplifier.
Shared Boost is not supported in HDA Systems.
Based on David Rhodes shared boost patches.
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Link: https://lore.kernel.org/r/20230223084324.9076-4-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of various small fixes that have been gathered since
the last PR. The majority of changes are for ASoC, and there is
a small change in ASoC PCM core, but the rest are all for driver-
specific fixes / quirks / updates.
-----BEGIN PGP SIGNATURE-----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=88Cc
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of various small fixes that have been gathered since the
last PR.
The majority of changes are for ASoC, and there is a small change in
ASoC PCM core, but the rest are all for driver- specific fixes /
quirks / updates"
* tag 'sound-fix-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits)
ALSA: ice1712: Delete unreachable code in aureon_add_controls()
ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls()
ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC
ALSA: hda/realtek: Improve support for Dell Precision 3260
ASoC: mediatek: mt8195: add missing initialization
ASoC: mediatek: mt8188: add missing initialization
ASoC: amd: yc: Add DMI entries to support HP OMEN 16-n0xxx (8A43)
ASoC: zl38060 add gpiolib dependency
ASoC: sam9g20ek: Disable capture unless building with microphone input
ASoC: mt8192: Fix range for sidetone positive gain
ASoC: mt8192: Report an error if when an invalid sidetone gain is written
ASoC: mt8192: Fix event generation for controls
ASoC: mt8192: Remove spammy log messages
ASoC: mchp-pdmc: fix poc noise at capture startup
ASoC: dt-bindings: sama7g5-pdmc: add microchip,startup-delay-us binding
ASoC: soc-pcm: add option to start DMA after DAI
ASoC: mt8183: Fix event generation for I2S DAI operations
ASoC: mt8183: Remove spammy logging from I2S DAI driver
ASoC: mt6358: Remove undefined HPx Mux enumeration values
ASoC: mt6358: Validate Wake on Voice 2 writes
...
If the check (id != 0x41) fails, then id == 0x41 and
the other check in 'else' branch also
fails: id & 0x0F = 0b01000001 & 0b00001111 = 0b00000001.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Fomin <fomindmitriyfoma@mail.ru>
Link: https://lore.kernel.org/r/20230225184322.6286-2-fomindmitriyfoma@mail.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If snd_ctl_add() fails in aureon_add_controls(), it immediately returns
and leaves ice->gpio_mutex locked. ice->gpio_mutex locks in
snd_ice1712_save_gpio_status and unlocks in
snd_ice1712_restore_gpio_status(ice).
It seems that the mutex is required only for aureon_cs8415_get(),
so snd_ice1712_restore_gpio_status(ice) can be placed
just after that. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Fomin <fomindmitriyfoma@mail.ru>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230225184322.6286-1-fomindmitriyfoma@mail.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The headset jack works better with model=alc283-dac-wcaps. Without this
option, the headset insertion (separate physical jack) may not be handled
correctly (re-insertion is required).
It seems that it follows the "Intel Reference Board" defaults.
Reported-by: steven_wu2@dell.com
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230221102157.515852-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The majority of works in this cycle are about ASoC spread over trees.
Most of them are for new devices and cleanups / refactoring works,
and not much significant changes are seen in the core side.
Below are some highlights:
ASoC:
- Continued refactoring to move into common helper functions
- Lots of DT schema conversons and stylistic nits
- Continued work on building out the new SOF IPC4 scheme
- Continued work for Intel AVS
- New drivers for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1
ALSA:
- A few cleanups to make the remove callbacks to void returns
- FireWire refactoring and enhancements
- PCM kselftest enhancements
-----BEGIN PGP SIGNATURE-----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=9s9c
-----END PGP SIGNATURE-----
Merge tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of works in this cycle are about ASoC spread over trees.
Most of them are for new devices and cleanups / refactoring works, and
not much significant changes are seen in the core side.
Below are some highlights:
ASoC:
- Continued refactoring to move into common helper functions
- Lots of DT schema conversons and stylistic nits
- Continued work on building out the new SOF IPC4 scheme
- Continued work for Intel AVS
- New drivers for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1
ALSA:
- A few cleanups to make the remove callbacks to void returns
- FireWire refactoring and enhancements
- PCM kselftest enhancements"
* tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (398 commits)
ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks
ASoC: soc-ac97: Return correct error codes
ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared
ASoC: cs35l45: Remove separate namespace for tables
ASoC: cs35l45: Remove separate tables module
ASoC: soc-ac97: Convert to agnostic GPIO API
ASoC: dt-bindings: renesas,rsnd.yaml: drop "dmas/dma-names" from "rcar_sound,ssi"
ALSA: hda: cs35l41: Enable Amp High Pass Filter
ALSA: hda: cs35l41: Ensure firmware/tuning pairs are always loaded
ALSA: hda: cs35l41: Correct error condition handling
ASoC: codecs: wcd934x: Use min macro for comparison and assignment
ASoC: Intel: Skylake: Fix struct definition
ASoC: tlv320adcx140: extend list of supported samplerates
ASoC: imx-pcm-rpmsg: Remove unused variable
SoC: rt5682s: Disable jack detection interrupt during suspend
ASoC: SOF: Intel: hda-dsp: Set streaming flag for d0i3
ASoC: SOF: Intel: Enable d0i3 work for ipc4
ASoC: SOF: ipc4: Wake up dsp core before sending ipc msg
ASoC: SOF: Intel: hda-dsp: use set_pm_gate according to ipc version
ASoC: SOF: Introduce a new set_pm_gate() IPC PM op
...
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate subsystem
trees, but the majority is in the same branch, in order to better handle
dependencies between the patches and avoid breaking bisection.
Unfortunately that leads to merge conflicts against other changes in the
subsystem trees, but they should all be trivial to resolve by removing
the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed. The
only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users.
-----BEGIN PGP SIGNATURE-----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=WejQ
-----END PGP SIGNATURE-----
Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
Commit 586bc4aab8 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for
AMD") caused only AMD gpu's with PX to have their audio component register
with vga_switcheroo. This meant that Apple Macbooks with apple-gmux as the
gpu switcher no longer had the audio client registering, so when the gpu is
powered off by vga_switcheroo snd_hda_intel is unaware that it should have
suspended the device:
amdgpu: switched off
snd_hda_intel 0000:03:00.1:
Unable to change power state from D3hot to D0, device inaccessible
snd_hda_intel 0000:03:00.1: CORB reset timeout#2, CORBRP = 65535
To resolve this, we use apple_gmux_detect() and register a
vga_switcheroo audio client when apple-gmux is detected.
Fixes: 586bc4aab8 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD")
Link: https://lore.kernel.org/all/20230210044826.9834-9-orlandoch.dev@gmail.com/
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20230216103450.12925-1-orlandoch.dev@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On HP Laptops, requires the ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED quirk to
make its audio LEDs and speaker work.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230214140432.39654-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To ensure firmware for cs35l41 is correctly running, it is necessary
that a corresponding tuning file is also loaded. Without both,
the firmware may not be performing correctly
Ensure that if we load the firmware, we have also loaded the correct
tuning file. Otherwise, fall back to default firmware and tuning.
If default tuning is also missing, then disable DSP firmware.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230213145008.1215849-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Function cs_dsp_coeff_write_ctrl() can return 3 possible values:
0 - no change, 1 - value has changed and -1 - error, so positive value
is not an error.
Fixes: 7406bdbc4f ("ASoC: wm_adsp: Return whether changed when writing controls")
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230213145008.1215849-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP platform needs ALC236_FIXUP_HP_GPIO_LED quirk to
make mic-mute/audio-mute working.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230214035853.31217-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GPIO2 PIN use for output. Mask Dir and Data need to assign for 0x4. Not 0x3.
This fixed was for Lenovo Desktop(0x17aa1056). GPIO2 use for AMP enable.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/8d02bb9ac8134f878cd08607fdf088fd@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit f2bd1c5ae2 ("ALSA: hda: Fix page fault in
snd_hda_codec_shutdown()") relocated initialization of several codec
device fields. Due to differences between codec_exec_verb() and
snd_hdac_bus_exec_bus() in how they handle VERB execution - the latter
does not touch PM - assigning ->exec_verb to codec_exec_verb() causes PM
to be engaged before it is configured for the device. Configuration of
PM for the ASoC HDAudio sound card is done with snd_hda_set_power_save()
during skl_hda_audio_probe() whereas the assignment happens early, in
snd_hda_codec_device_init().
Revert to previous behavior to avoid problems caused by too early PM
manipulation.
Suggested-by: Jason Montleon <jmontleo@redhat.com>
Link: https://lore.kernel.org/regressions/CALFERdzKUodLsm6=Ub3g2+PxpNpPtPq3bGBLbff=eZr9_S=YVA@mail.gmail.com
Fixes: f2bd1c5ae2 ("ALSA: hda: Fix page fault in snd_hda_codec_shutdown()")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230210165541.3543604-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This 2nd variables are all set as true in treewide. So I think
it can be removed for easy understanding.
Signed-off-by: Zhang Yiqun <zhangyiqun@phytium.com.cn>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230209121723.14328-1-zhangyiqun@phytium.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP platform needs ALC236_FIXUP_HP_GPIO_LED quirk to
make mic-mute/audio-mute working.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207083011.100189-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This Asus Zenbook laptop use Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with External Boost.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230206150019.3825120-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP Elitebook 645 G9 laptop (with motherboard model 89D2) uses the
ALC236 codec and requires the alc236_fixup_hp_mute_led_micmute_vref
fixup in order to enable mute/micmute LEDs.
Note: the alc236_fixup_hp_gpio_led fixup, which is used by the Elitebook
640 G9, does not work with the 645 G9.
[ rearranged the entry in SSID order -- tiwai ]
Signed-off-by: Elvis Angelaccio <elvis.angelaccio@kde.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4055cb48-e228-8a13-524d-afbb7aaafebe@kde.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some motherboards have multiple HDA codecs connected to the serial bus.
The current code may create multiple mixer controls with the almost
identical identification.
The current code use id.device field from the control element structure
to store the codec address to avoid such clashes for multiple codecs.
Unfortunately, the user space do not handle this correctly. For mixer
controls, only name and index are used for the identifiers.
This patch fixes this problem to compose the index using the codec
address as an offset in case, when the control already exists. It is
really unlikely that one codec will create 10 similar controls.
This patch adds new kernel module parameter 'ctl_dev_id' to allow
select the old behaviour, too. The CONFIG_SND_HDA_CTL_DEV_ID Kconfig
option sets the default value.
BugLink: https://github.com/alsa-project/alsa-lib/issues/294
BugLink: https://github.com/alsa-project/alsa-lib/issues/205
Fixes: 54d1740315 ("[ALSA] hda-codec - Fix connection list parsing")
Fixes: 1afe206ab6 ("ALSA: hda - Try to find an empty control index when it's occupied")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230202092013.4066998-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ucb1400 MFD driver and its gpio and touchscreen child
drivers were only used on a few PXA machines that were unused
for a while and are now removed.
Removing these leaves the AC97 support as ALSA specific,
no other drivers are now connected through this interface.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Marek Vasut <marex@denx.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung Galaxy Book2 Pro 360 (13" 2022 NP930QED-KA1FR) with codec SSID
144d:ca03 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 codec.
Cc: <stable@vger.kernel.org>
Signed-off-by: Guillaume Pinot <texitoi@texitoi.eu>
Link: https://lore.kernel.org/r/20230129171338.17249-1-texitoi@texitoi.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This loop accidentally reuses the "i" iterator for both the inside and
the outside loop. The value of MAX_STREAM_BUFFER is 5. I believe that
chip->rmh.stat_len is in the 2-12 range. If the value of .stat_len is
4 or more then it will loop exactly one time, but if it's less then it
is a forever loop.
It looks like it was supposed to combined into one loop where
conditions are checked.
Fixes: 8e6320064c ("ALSA: lx_core: Remove useless #if 0 .. #endif")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y9jnJTis/mRFJAQp@kili
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Several functions that take part in codec's initialization and removal
are re-used by ASoC codec drivers implementations. Drivers mimic the
behavior of hda_codec_driver_probe/remove() found in
sound/pci/hda/hda_bind.c with their component->probe/remove() instead.
One of the reasons for that is the expectation of
snd_hda_codec_device_new() to receive a valid pointer to an instance of
struct snd_card. This expectation can be met only once sound card
components probing commences.
As ASoC sound card may be unbound without codec device being actually
removed from the system, unsetting ->preset in
snd_hda_codec_cleanup_for_unbind() interferes with module unload -> load
scenario causing null-ptr-deref. Preset is assigned only once, during
device/driver matching whereas ASoC codec driver's module reloading may
occur several times throughout the lifetime of an audio stack.
Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230119143235.1159814-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hda_get_connections() can return a negative error code.
It may lead to accessing 'conn' array at a negative index.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Artemii Karasev <karasev@ispras.ru>
Fixes: 30b4503378 ("ALSA: hda - Expose secret DAC-AA connection of some VIA codecs")
Link: https://lore.kernel.org/r/20230119082259.3634-1-karasev@ispras.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP platform needs ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED quirk to
make mic-mute/audio-mute/speaker working.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230118115446.14902-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the "dma_chan" pointer occupies more or equal space compared
to "*dma_chan", the allocation size should use the size of variable
itself.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 01ef7dbffb ("ALSA: hda - Update CA0132 codec to load DSP firmware binary")
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Link: https://lore.kernel.org/r/20230117111522.GA15213@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP Spectre x360 13-aw0xxx devices use the ALC285 codec with GPIO 0x04
controlling the micmute LED and COEF 0x0b index 8 controlling the mute LED.
A quirk was added to make these work as well as a fixup.
Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230110202514.2792-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the 'HP Engage Flex Mini' device to the force connect list to
enable audio through HDMI.
Signed-off-by: Adrian Chan <adchan@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230109210520.16060-1-adchan@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The runtime PM core checks with runtime_idle callback whether it can
goes to the runtime suspend or not, and we can put the boost type
check there instead of runtime_suspend and _resume calls. This will
reduce the unnecessary runtime_suspend() calls.
Fixes: 1873ebd30c ("ALSA: hda: cs35l41: Support Hibernation during Suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230105093531.16960-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent commit to support the system suspend for CS35L41 caused a
regression on the models with CS35L41_EXT_BOOST_NO_VSPK_SWITC boost
type, as the suspend/resume callbacks just return -EINVAL. This is
eventually handled as a fatal error and blocks the whole system
suspend/resume.
For avoiding the problem, this patch corrects the return code from
cs35l41_system_suspend() and _resume() to 0, and replace dev_err()
with dev_err_once() for stop spamming too much.
Fixes: 88672826e2 ("ALSA: hda: cs35l41: Support System Suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/e6751ac2-34f3-d13f-13db-8174fade8308@pm.me
Link: https://lore.kernel.org/r/20230105093531.16960-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP platform uses ALC236 codec which using GPIO2 to control
mute LED and GPIO1 to control micmute LED.
Thus, add a quirk to make them work.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230105044154.8242-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is another Dell Latitude laptop (1028:0c03) with Realtek
codec ALC3254 which needs the ALC269_FIXUP_DELL4_MIC_NO_PRESENCE
instead of the default matched ALC269_FIXUP_DELL1_MIC_NO_PRESENCE.
Apply correct fixup for this particular model to enable headset mic.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230103095332.730677-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Turn on power early to avoid wrong state for power relation register.
This can earlier update JD state when resume back.
Signed-off-by: Yuchi Yang <yangyuchi66@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/e35d8f4fa18f4448a2315cc7d4a3715f@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent code refactoring for HD-audio HDMI codec driver caused a
regression on AMD/ATI HDMI codecs; namely, PulseAudioand pipewire
don't recognize HDMI outputs any longer while the direct output via
ALSA raw access still works.
The problem turned out that, after the code refactoring, the driver
assumes only the dynamic PCM assignment, and when a PCM stream that
still isn't assigned to any pin gets opened, the driver tries to
assign any free converter to the PCM stream. This behavior is OK for
Intel and other codecs, as they have arbitrary connections between
pins and converters. OTOH, on AMD chips that have a 1:1 mapping
between pins and converters, this may end up with blocking the open of
the next PCM stream for the pin that is tied with the formerly taken
converter.
Also, with the code refactoring, more PCM streams are exposed than
necessary as we assume all converters can be used, while this isn't
true for AMD case. This may change the PCM stream assignment and
confuse users as well.
This patch fixes those problems by:
- Introducing a flag spec->static_pcm_mapping, and if it's set, the
driver applies the static mapping between pins and converters at the
probe time
- Limiting the number of PCM streams per pins, too; this avoids the
superfluous PCM streams
Fixes: ef6f5494fa ("ALSA: hda/hdmi: Use only dynamic PCM device allocation")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216836
Co-developed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20221228125714.16329-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Dell Latiture 3340/3440/3540 laptops with Realtek ALC3204 have
dual codecs and need the ALC1220_FIXUP_GB_DUAL_CODECS to fix the
conflicts of Master controls. The existing headset mic fixup for
Dell is also required to enable the jack sense and the headset mic.
Introduce a new fixup to fix the dual codec and headset mic issues
for particular Dell laptops since other old Dell laptops with the
same codec configuration are already well handled by the fixup in
alc269_fallback_pin_fixup_tbl[].
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221226114303.4027500-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the new style KAE keep-alive implementation is used on compatible
Intel hardware, the clocks are maintained when codec is in D3. The
generic code in hda_cleanup_all_streams() can however interfere with
generation of audio samples in this mode, by setting the stream and
channel ids to zero.
To get full benefit of the keepalive, set the new
no_stream_clean_at_suspend quirk bit on affected Intel hardware. When
this bit is set, stream cleanup is skipped in hda_call_codec_suspend().
Special handling is needed for the case when system goes to suspend. The
stream id programming can be lost in this case. This will also cause
codec->cvt_setups to be out of sync. Handle this by implementing custom
suspend/resume handlers. If keep-alive is active for any converter, set
the quirk flags no_stream_clean_at_suspend and forced_resume. Upon
resume, keepalive programming is restored if needed.
Fixes: 15175a4f2b ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221209101822.3893675-4-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the stream-id is zero, the keep-alive (KAE) will only ensure clock is
generated, but no audio samples are sent over display link. This happens
before first real audio stream is played out to a newly connected
receiver.
Reuse the code in silent_stream_enable() to set up stream parameters
to sane defaults values, also when using the newer keep-alive flow.
Fixes: 15175a4f2b ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20221209101822.3893675-3-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The i915 display codec may not successfully transition to
normal audio streaming mode, if the stream id is programmed
while codec is actively transmitting data. This can happen
when silent stream is enabled in KAE mode.
Fix the issue by implementing a i915 specific programming
flow, where the silent streaming is temporarily stopped,
a small delay is applied to ensure display codec becomes
idle, and then proceed with reprogramming the stream ID.
Fixes: 15175a4f2b ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7353
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20221209101822.3893675-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HDMI audio is not working on the HP EliteDesk 800 G6 because the pin is
unconnected. This issue can be resolved by using the 'hdajackretask'
tool to override the unconnected pin to force it to connect.
Signed-off-by: Jiao Zhou <jiaozhou@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221206185311.3669950-1-jiaozhou@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:
- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588
There's more cross tree updates than usual, though all fairly minor:
- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.
Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOOO08ACgkQJNaLcl1U
h9BiIAf+O8zqcxtokSTS3wsoFHDp2zprTTUk3RZbxaYMFTmFrALbQVUx5EdJ179X
Dr9rL9T2iNBN7YGhDvmzoVvLrDncJEerMk7cgbc88a5tkB7ZipI7E9QliZt92QaP
ihrXAyD7ekLC6QLXrHFNmzwUeFspgtsBkT3MakcfcucuMN53UQbFwD1r0ziCJOMZ
gFnkZKBemUDsURxWR+LCveB/WYKNrZ6Bjokdg8HY1yenACMiXaoWedmIFJ2SxId3
NNS8vqUDUSEFhDaeJVBo1Ow9m8fe+dZBUeVk9Ej7bGEXxYptwtu3aODXknySa8Eb
YVlalR9qQPvaI1688WRleRWp+oyL4Q==
=x1AC
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.2
This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:
- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588
There's more cross tree updates than usual, though all fairly minor:
- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.
Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.
The Dell Inspiron Plus 16, in both laptop and 2in1 form factor, has top
speakers connected on NID 0x17, which the codec reports as unconnected.
These speakers should be connected to the DAC on NID 0x03.
Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Link: https://lore.kernel.org/r/20221205163713.7476-1-p.jungkamp@gmx.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
New HW platforms with multiple CS42L42 parts, faster CPU and i2c
requre some extra delay to allow PLL to settle and lock. Adding
extra 10ms delay.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221205145713.23852-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Mark Brown <broonie@kernel.org>:
The recently added pcm-test selftest has pointed out that systems with
the tda998x driver end up advertising that they support capture when in
reality as far as I can see the tda998x devices are transmit only. The
DAIs registered through hdmi-codec are bidirectional, meaning that for
I2S systems when combined with a typical bidrectional CPU DAI the
overall capability of the PCM is bidirectional. In most cases the I2S
links will clock OK but no useful audio will be returned which isn't so
bad but we should still not advertise the useless capability, and some
systems may notice problems for example due to pinmux management.
This is happening due to the hdmi-codec helpers not providing any
mechanism for indicating unidirectional audio so add one and use it in
the tda998x driver. It is likely other hdmi-codec users are also
affected but I don't have those systems to hand.
Mark Brown (2):
ASoC: hdmi-codec: Allow playback and capture to be disabled
drm: tda99x: Don't advertise non-existent capture support
drivers/gpu/drm/i2c/tda998x_drv.c | 2 ++
include/sound/hdmi-codec.h | 4 ++++
sound/soc/codecs/hdmi-codec.c | 30 +++++++++++++++++++++++++-----
3 files changed, 31 insertions(+), 5 deletions(-)
base-commit: f0c4d9fc9c
--
2.30.2
There is a HP ProBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221128022849.13759-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
pci_disable_device() need be called while module exiting, switch to use
pcim_enable(), pci_disable_device() will be called in pcim_release().
Fixes: 3285ea10e9 ("ALSA: asihpi - Interrelated HPI tidy up.")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20221126021429.3029562-1-liushixin2@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move all the exports into a namespace.
This also adds the MODULE_IMPORT_NS to the 3 drivers that use the
exported functions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221124134556.3343784-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualify the KConfig symbol for cs_dsp by adding a FW_ prefix so that
it is more explicit what is being referred to. This is preparation for
using the symbol to namespace the exports.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221124134556.3343784-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are able to power down the GPU and audio via the GPU driver
so flag these asics as supporting runtime pm.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221108084746.583058-1-evan.quan@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 1f9d3d9869 ("ALSA: hda - set intel audio clock to a
proper value") added a number of misleading comments.
There is no ability to detect if an SCF value was set or not, what the
code does is prevent the use of the 6MHz audio clock represented by
the value 0 in LCTL.SCF. Changing the SCF settings does require the
link to be power-cycled, but in all other cases the link is powered
automatically when exiting reset. In other words, the power-cycle is
an exception to the rule that the HDaudio legacy driver does not need
to program SPA/CPA bits.
In addition, the SCF related changes are only relevant for the first
link.
No functionality change, only comment clarifications.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221031195505.249929-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This Asus Zenbook laptop use Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with Internal Boost.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221028102742.2588687-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. This fixes warnings like:
sound/pci/rme9652/hdsp.c:3953 hdsp_channel_buffer_location() warn: 'hdsp->channel_map[channel]' is unsigned
sound/pci/rme9652/hdsp.c:4153 snd_hdsp_channel_info() warn: impossible condition '(hdsp->channel_map[channel] < 0) => (0-255 < 0)'
sound/pci/rme9652/rme9652.c:1833 rme9652_channel_buffer_location() warn: 'rme9652->channel_map[channel]' is unsigned
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221025000313.546261-1-Jason@zx2c4.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. This fixes warnings like:
sound/pci/au88x0/au88x0_core.c:2029 vortex_adb_checkinout() warn: signedness bug returning '(-22)'
sound/pci/au88x0/au88x0_core.c:2046 vortex_adb_checkinout() warn: signedness bug returning '(-12)'
sound/pci/au88x0/au88x0_core.c:2125 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, (0), en, 0)' is unsigned
sound/pci/au88x0/au88x0_core.c:2170 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, stream->resources, en, 4)' is unsigned
As well, since one function returns errnos, return an `int` rather than
a `signed char`.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221024162929.536004-1-Jason@zx2c4.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Variable loops is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221024130803.2156295-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP ZBook Firefly 16 G9 (103c:896d) and HP ZBook Power 15.6 G9
(103c:89c0) require the same quirk for enabling CS35L41 speaker amps.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221022072107.3401-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the recent addition of hashed controls lookup it's not enough to just
update the control name field, the hash entries for the modified control
have to be updated too.
snd_ctl_rename() takes care of that, so use it instead of directly
modifying the control name.
While we are at it, check also that the new control name doesn't
accidentally overwrite the available buffer space.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/r/adb68bfa0885ba4a2583794b828f8e20d23f67c7.1666296963.git.maciej.szmigiero@oracle.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the recent addition of hashed controls lookup it's not enough to just
update the control name field, the hash entries for the modified control
have to be updated too.
snd_ctl_rename() takes care of that, so use it instead of directly
modifying the control name.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/r/bffee980a420f9b0eee5681d2f48d34a70cec0ce.1666296963.git.maciej.szmigiero@oracle.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the recent addition of hashed controls lookup it's not enough to just
update the control name field, the hash entries for the modified control
have to be updated too.
snd_ctl_rename() takes care of that, so use it instead of directly
modifying the control name.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/r/38b19f019f95ee78a6e4e59d39afb9e2c3379413.1666296963.git.maciej.szmigiero@oracle.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the recent addition of hashed controls lookup it's not enough to just
update the control name field, the hash entries for the modified control
have to be updated too.
snd_ctl_rename() takes care of that, so use it instead of directly
modifying the control name.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/r/37496bd80f91f373268148f877fd735917d97287.1666296963.git.maciej.szmigiero@oracle.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If device_register() fails in snd_ac97_dev_register(), it should
call put_device() to give up reference, or the name allocated in
dev_set_name() is leaked.
Fixes: 0ca06a00e2 ("[ALSA] AC97 bus interface for ad-hoc drivers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221019093025.1179475-1-yangyingliang@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This Asus Zenbook laptop use Realtek HDA codec combined with
2xCS35L41 Amplifiers using SPI with External Boost.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221018121506.2561397-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here are a few remaining patches for 6.1-rc1. The major changes
are the hibernation fixes for HD-audio CS35L41 codec and the
USB-audio small fixes against the last change. In addition, a
couple of HD-audio regression fixes and a couple of potential
mutex-deadlock fixes with OSS emulation in ALSA core side are seen.
-----BEGIN PGP SIGNATURE-----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=6PA4
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are a few remaining patches for 6.1-rc1.
The major changes are the hibernation fixes for HD-audio CS35L41 codec
and the USB-audio small fixes against the last change. In addition, a
couple of HD-audio regression fixes and a couple of potential
mutex-deadlock fixes with OSS emulation in ALSA core side are seen"
* tag 'sound-fix-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: cs35l41: Support System Suspend
ALSA: hda: cs35l41: Remove suspend/resume hda hooks
ALSA: hda/cs_dsp_ctl: Fix mutex inversion when creating controls
ALSA: hda: hda_cs_dsp_ctl: Ensure pwr_lock is held before reading/writing controls
ALSA: hda: hda_cs_dsp_ctl: Minor clean and redundant code removal
ALSA: oss: Fix potential deadlock at unregistration
ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free()
ALSA: hda/realtek: Add Intel Reference SSID to support headset keys
ALSA: hda/realtek: Add quirk for ASUS GV601R laptop
ALSA: hda/realtek: Correct pin configs for ASUS G533Z
ALSA: usb-audio: Avoid superfluous endpoint setup
ALSA: usb-audio: Correct the return code from snd_usb_endpoint_set_params()
ALSA: usb-audio: Apply mutex around snd_usb_endpoint_set_params()
ALSA: usb-audio: Avoid unnecessary interface change at EP close
ALSA: hda: Update register polling macros
ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530
Add support for system suspend into the CS35L41 HDA Driver.
Since S4 suspend may power off the system, it is required
that the driver ensure the part is safe to be shutdown before
system suspend, as well as ensuring that the firmware is
unloaded before shutdown. The part must then be restored
on system resume, including re-downloading the firmware.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221011143552.621792-6-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current code uses calls from the HDA Codec driver to
determine when to suspend/resume by calling hooks via the
hda_component binding.
However, this means the cs35l41 driver relies on the HDA
Codec driver to tell it when to suspend or resume,
creating an additional external dependency, and potentially
creating race conditions in the future. It is better for
the cs35l41 hda driver to decide for itself when the part
should be suspended or resumed.
This makes supporting system suspend easier.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221011143552.621792-5-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Redesign the creation of ALSA controls so that the cs_dsp
pwr_lock is not held when calling snd_ctl_add(). Instead of
creating the ALSA control from the cs_dsp control_add callback,
do it after cs_dsp_power_up() has completed. The existing
functions are changed to return void instead of passing errors
back - this duplicates the original behaviour, as cs_dsp does
not abort firmware load if creation of a control fails.
It is safe to walk the control list without taking any mutex
provided that the caller is not trying to load a new firmware
or remove the driver in parallel. There is no other situation
that the list can change. So the caller can trigger creation
of ALSA controls after cs_dsp_power_up() has returned. A cs_dsp
control will have a non-NULL priv pointer if we have created
an ALSA control.
With the previous code the ALSA controls were created from
the cs_dsp control_add callback. But this is called with
pwr_lock held (as it is part of the DSP power-up sequence).
The kernel lock checking will show a mutex inversion between
this and the control creation path:
control_add
pwr_lock held, takes controls_rwsem (in snd_ctl_add)
get/put
controls_rwsem held, takes pwr_lock to call cs_dsp.
This is not completely theoretical. Although the time window
is very small, it is possible for these to run in parallel
and deadlock the old implementation.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221011143552.621792-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The cs_dsp core will return an error if passed a NULL cs_dsp struct so
there is no need for the hda_cs_dsp_write|read_ctl functions to manually
check that. The cs_dsp core will also check the data is within bounds of
the control so the additional bounds check is redundant too. Simplify
things a bit by removing said code.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221011143552.621792-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes the issue with 3.5mm headset keys
on RPL-P platform.
[ Rearranged the entry in SSID order by tiwai ]
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Ninad Naik <ninad.naik@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011044916.2278867-1-saranya.gopal@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS ROG X16 (GV601R) series laptop has the same node-to-DAC pairs
as early models and the G14, this includes bass speakers which are by
default mapped incorrectly to the 0x06 node.
Add a quirk to use the same DAC pairs as the G14.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221010070347.36883-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The initial fix for ASUS G533Z was based on faulty information. This
fixes the pincfg to values that have been verified with no existing
module options or other hacks enabled.
Enables headphone jack, and 5.1 surround.
[ corrected the indent level by tiwai ]
Fixes: bc2c23549c ("ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221010065702.35190-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Majority of changes at this PR are ASoC drivers (SOF, Intel, AMD,
Mediatek, Qualcomm, TI, Apple Silicon, etc), while we see a few
small fixes in ALSA / ASoC core side, too.
Here are highlights:
Core:
- A new string helper parse_int_array_user() and cleanups with it
- Continued cleanup of memory allocation helpers
- PCM core optimization and hardening
- Continued ASoC core code cleanups
ASoC:
- Improvements to the SOF IPC4 code, especially around trace
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple
Silicon systems, Everest ES8326, Intel Sky Lake and Kaby Lake,
Mediatek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP,
SM8250 and SM8450 and Texas Instruments SRC4392
HD- and USB-audio:
- Cleanups for unification of hda-ext bus
- HD-audio HDMI codec driver cleanups
- Continued endpoint management fixes for USB-audio
- New quirks as usual
-----BEGIN PGP SIGNATURE-----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=EWRA
-----END PGP SIGNATURE-----
Merge tag 'sound-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes are ASoC drivers (SOF, Intel, AMD, Mediatek,
Qualcomm, TI, Apple Silicon, etc), while we see a few small fixes in
ALSA / ASoC core side, too.
Here are highlights:
Core:
- A new string helper parse_int_array_user() and cleanups with it
- Continued cleanup of memory allocation helpers
- PCM core optimization and hardening
- Continued ASoC core code cleanups
ASoC:
- Improvements to the SOF IPC4 code, especially around trace
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple
Silicon systems, Everest ES8326, Intel Sky Lake and Kaby Lake,
Mediatek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP,
SM8250 and SM8450 and Texas Instruments SRC4392
HD- and USB-audio:
- Cleanups for unification of hda-ext bus
- HD-audio HDMI codec driver cleanups
- Continued endpoint management fixes for USB-audio
- New quirks as usual"
* tag 'sound-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (422 commits)
ALSA: hda: Fix position reporting on Poulsbo
ALSA: hda/hdmi: Don't skip notification handling during PM operation
ASoC: rockchip: i2s: use regmap_read_poll_timeout_atomic to poll I2S_CLR
ASoC: dt-bindings: Document audio OF graph dai-tdm-slot-num dai-tdm-slot-width props
ASoC: qcom: fix unmet direct dependencies for SND_SOC_QDSP6
ALSA: usb-audio: Fix potential memory leaks
ALSA: usb-audio: Fix NULL dererence at error path
ASoC: mediatek: mt8192-mt6359: Set the driver name for the card
ALSA: hda/realtek: More robust component matching for CS35L41
ASoC: Intel: sof_rt5682: remove SOF_RT1015_SPEAKER_AMP_100FS flag
ASoC: nau8825: Add TDM support
ASoC: core: clarify the driver name initialization
ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe
ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe
ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe
ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe
ASoC: wcd-mbhc-v2: Revert "ASoC: wcd-mbhc-v2: use pm_runtime_resume_and_get()"
ASoC: mediatek: mt8186: Fix spelling mistake "slect" -> "select"
ALSA: hda/realtek: Add quirk for HP Zbook Firefly 14 G9 model
ALSA: asihpi - Remove unused struct hpi_subsys_response
...
After some feedback from users with Dell Precision 5530 machines, this
patch reverts the previous change to add ALC289_FIXUP_DUAL_SPK.
While it improved the speaker output quality, it caused the headphone
jack to have an audible "pop" sound when power saving was toggled.
Fixes: 1885ff13d4 ("ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop")
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Yz0uyN1zwZhnyRD6@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hans reported that his Sony VAIO VPX11S1E showed the broken sound
behavior at the start of the stream for a couple of seconds, and it
turned out that the position_fix=1 option fixes the issue. It implies
that the position reporting is inaccurate, and very likely hitting on
all Poulsbo devices.
The patch applies the workaround for Poulsbo generically to switch to
LPIB mode instead of the default position buffer.
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3e8697e1-87c6-7a7b-d2e8-b21f1d2f181b@redhat.com
Link: https://lore.kernel.org/r/20221001142124.7241-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HDMI driver skips the notification handling from the graphics
driver when the codec driver is being in the PM operation. This
behavior was introduced by the commit eb399d3c99 ("ALSA: hda - Skip
ELD notification during PM process"). This skip may cause a problem,
as we may miss the ELD update when the connection/disconnection
happens right at the runtime-PM operation of the audio codec.
Although this workaround was valid at that time, it's no longer true;
the fix was required just because the ELD update procedure needed to
wake up the audio codec, which had lead to a runtime-resume during a
runtime-suspend. Meanwhile, the ELD update procedure doesn't need a
codec wake up any longer since the commit 788d441a16 ("ALSA: hda -
Use component ops for i915 HDMI/DP audio jack handling"); i.e. there
is no much reason for skipping the notification.
Let's drop those checks for addressing the missing notification.
Fixes: 788d441a16 ("ALSA: hda - Use component ops for i915 HDMI/DP audio jack handling")
Reported-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20220927135807.4097052-1-brent.lu@intel.com
Link: https://lore.kernel.org/r/20221001074809.7461-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As the previous commit implies, a system may have a different SPI bus
number that is embedded in the device string. And, assuming the fixed
bus number is rather fragile; it may be assigned differently depending
on the configuration or on the boot environment. Once when a bus
number change happens, the binding fails, resulting in the silence.
This patch tries to make the matching a bit more relaxed, allowing to
bind with a different bus number (or without it). So the previous
fix, the introduction of ALC245_FIXUP_CS35L41_SPI1_2 fixup became
superfluous, and this is unified to ALC245_FIXUP_CS35L41_SPI_2.
Fixes: 225f6e1bc1 ("ALSA: hda/realtek: Add quirk for HP Zbook Firefly 14 G9 model")
Link: https://lore.kernel.org/r/20220930084810.10435-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Zbook Firefly 14 G9 model (103c:8abb) requires yet another binding
with CS35L41 codec, but with a slightly different configuration. It's
over spi1 instead of spi0. Create a new fixup entry for that.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220929061455.13355-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After commit 3285ea10e9b0("ALSA: asihpi - Interrelated HPI tidy up."),
struct hpi_subsys_response is not used any more and can be removed as well.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20220928084833.61131-1-yuancan@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change in ALSA core allows drivers to get the current PCM
state directly from runtime object. Replace the calls accordingly.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220926135558.26580-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current hardware has up to 4 converters. Save little space.
The limit 8 is enough even for a more improved hardware.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220923082236.61024-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Per discussion on the alsa-devel mailing list [1], the legacy PIN to PCM
device mapping is obsolete nowadays. The maximum number of the simultaneously
usable PCM devices is equal to the HDMI codec converters.
Remove the extra PCM devices (beyond the detected converters) and force
the use of the dynamic PCM device allocation. The legacy code is removed.
I believe that all HDMI codecs have the jack sensing feature. Move the check
to the codec probe function and print a warning, if a codec without this
feature is detected.
[1] https://lore.kernel.org/alsa-devel/2f37e0b2-1e82-8c0b-2bbd-1e5038d6ecc6@perex.cz/
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220922084017.25925-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Return the value dsp_allocate_ports() directly instead of storing it in
another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220922112846.236987-1-ye.xingchen@zte.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It is useful for the debugging to print also the used HDA codec NIDs
used for the given HDMI device. With the dynamic converter assignment
the converter NID is changed dynamically.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220921093349.82680-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Track the converters handling the silent stream using a new
variable to avoid mixing of the open/close and silent stream
use. This change ensures the proper allocation of the converters.
Fixes: 5f80d6bd2b ("ALSA: hda/hdmi: Fix the converter reuse for the silent stream")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919135444.3554982-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Similair to the HP OMEN 15, the HP OMEN 16 also needs
ALC285_FIXUP_HP_MUTE_LED for the mute LED to work.
[ Rearranged the entry in PCI SSID order by tiwai ]
Signed-off-by: Daniel Houldsworth <dhould3@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220918171300.24693-1-dhould3@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the user space pcm stream uses the silent stream converter,
it is no longer allocated for the silent stream. Clear the appropriate
flag in the hdmi_pcm_open() function. The silent stream setup may
be applied in hdmi_pcm_close() (and the error path - open fcn) again.
If the flag is not cleared, the reuse conditions for the silent
stream converter in hdmi_choose_cvt() may improperly share
this converter.
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220913070216.3233974-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS G15 2022 (GA503R) series laptop has the same node-to-DAC pairs
as early models and the G14, this includes bass speakers which are by
default mapped incorrectly to the 0x06 node.
Add a quirk to use the same DAC pairs as the G14.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-4-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes up the pincfg for ASUS ROG Strix G15 (G533Z) headphone combo jack
[ Fixed the position in the quirk table by tiwai ]
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-3-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes up the pincfg for ASUS ROG Strix G513 headphone and mic combo jack
[ Fixed the position in the quirk table by tiwai ]
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few entries have been mistakenly inserted in wrong positions without
considering the SSID ordering. Place them at right positions.
Fixes: b7557267c2 ("ALSA: hda/realtek: Add quirk for ASUS GA402")
Fixes: 94db9cc8f8 ("ALSA: hda/realtek: Add quirk for ASUS GU603")
Fixes: 739d0959fb ("ALSA: hda: Add quirk for ASUS Flow x13")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915154724.31634-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just as with the 5570 (and the other Dell laptops), this enables the two
subwoofer speakers on the Dell Precision 5530 together with the main
ones, significantly increasing the audio quality. I've tested this
myself on a 5530 and can confirm it's working as expected.
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YyMjQO3mhyXlMbCf@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Dell Precision 5570 uses the same 4-speakers-on-ALC289 just like the
previous Precision 5560. I replicated that patch onto this one, and can
confirm that the audio is much better (the woofers are now working);
I've tested it on my Dell Precision 5570.
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YyGbWM5wEoFMbW2v@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This change converts the assigned value from int type to
the bool type to retain consistency with other structure
members like 'setup', 'non_pcm' etc.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220913070307.3234038-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Nvidia HDA HW expects infoframe data bytes order same for both
HDMI and DP i.e infoframe data starts from 5th bytes offset. As
dp infoframe structure has 4th byte as valid infoframe data, use
hdmi infoframe structure for nvidia dp infoframe to match HW behvaior.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220913065818.13015-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We fixed the potential deadlock at dynamic unbinding the HD-audio
codec at the commit 7206998f57 ("ALSA: hda: Fix potential deadlock
at codec unbinding"), but ironically, this caused another potential
deadlock. The current code uses refcount_dec() and waits for the
pending task with wait_event for dropping the refcount to 0. This
works fine when PCMs are assigned and actually waiting for the
refcount drop.
Meanwhile, when there was no PCM assigned, the refcount_dec() call
itself was supposed to drop to zero -- alas, it doesn't in reality;
refcount_dec() complains, spews kernel warning and it saturates
instead of dropping to 0, due to the nature of refcount_dec()
implementation. This eventually blocks the wait_event() wakeup and
the code get stuck there.
For avoiding the problem, we call refcount_dec_and_test() and skips
the sync-wait if it already reaches to zero.
The patch does a slight code reshuffling to make sure to invoke other
disconnect calls before the sync-wait, too.
Fixes: 7206998f57 ("ALSA: hda: Fix potential deadlock at codec unbinding")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YxtflWQnslMHVlU7@intel.com
Link: https://lore.kernel.org/r/20220910142550.28494-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The voice allocator sometimes begins allocating from near the end of the
array and then wraps around, however snd_emu10k1_pcm_channel_alloc()
accesses the newly allocated voices as if it never wrapped around.
This results in out of bounds access if the first voice has a high enough
index so that first_voice + requested_voice_count > NUM_G (64).
The more voices are requested, the more likely it is for this to occur.
This was initially discovered using PipeWire, however it can be reproduced
by calling aplay multiple times with 16 channels:
aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero
UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40
index 65 is out of range for type 'snd_emu10k1_voice [64]'
CPU: 1 PID: 31977 Comm: aplay Tainted: G W IOE 6.0.0-rc2-emu10k1+ #7
Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x3f
__ubsan_handle_out_of_bounds.cold+0x44/0x49
snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1]
snd_pcm_hw_params+0x29f/0x600 [snd_pcm]
snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm]
? exit_to_user_mode_prepare+0x35/0x170
? do_syscall_64+0x69/0x90
? syscall_exit_to_user_mode+0x26/0x50
? do_syscall_64+0x69/0x90
? exit_to_user_mode_prepare+0x35/0x170
snd_pcm_ioctl+0x27/0x40 [snd_pcm]
__x64_sys_ioctl+0x95/0xd0
do_syscall_64+0x5c/0x90
? do_syscall_64+0x69/0x90
? do_syscall_64+0x69/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3707dcab-320a-62ff-63c0-73fc201ef756@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When put_device() is called in another function it's hard to realize
that and easy to "fix" the code in a wrong way. Instead, move
put_device() to be in the same scope as get_device(), so we prevent
appearance of any attempts to "fix" the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220905165826.35979-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent fix for IDT codecs to keep the power up while the beep is
enabled can be better integrated into the beep helper code.
This patch cleans up the code with refactoring.
Fixes: 414d38ba87 ("ALSA: hda/sigmatel: Keep power up while beep is enabled")
Link: https://lore.kernel.org/r/20220906092306.26183-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The last fix for trying to recover the regression on AMD platforms,
unfortunately, leaded to yet another regression: it turned out that
IOMMUs don't like the usage of raw page allocations.
This is yet another attempt for addressing the log saga; at this time,
we re-use the existing buffer allocation mechanism with SG-pages
although we require only single pages. The SG buffer allocation
itself was confirmed to work for stream buffers, so it's relatively
easy to adapt for other places.
The only problem is: although the HD-audio code is accessing the
address directly via dmab->address field, SG-pages don't set up it.
For the ease of adaption, we now set up the dmab->addr field from the
address of the first page as default, so that it can run with the
HD-audio driver code as-is without the excessive call of
snd_sgbuf_get_addr() multiple times; that's the only change in the
memalloc helper side. The rest is nothing but a flip of the dma_type
field in the HD-audio side.
Fixes: a8d302a0b7 ("ALSA: memalloc: Revive x86-specific WC page allocations again")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CABXGCsO+kB2t5QyHY-rUe76npr1m0-5JOtt8g8SiHUo34ur7Ww@mail.gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216112
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216363
Link: https://lore.kernel.org/r/20220906090319.23358-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AZA HW may send a burst read/write request crossing 4K memory boundary.
The 4KB boundary is not guaranteed by Tegra HDA HW. Make SW change to
include the flag AZX_DCAPS_4K_BDLE_BOUNDARY to align BDLE to 4K
boundary.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220905172420.3801-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The newly added stac_check_power_status() caused a compile warning
when CONFIG_SND_HDA_INPUT_BEEP is disabled. Fix it.
Fixes: 414d38ba87 ("ALSA: hda/sigmatel: Keep power up while beep is enabled")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220905130630.2845-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hpi_meter_get_peak() function contains the expression
"hm.obj_index = hm.obj_index", which does not carry any semantic load.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 719f82d398 ("ALSA: Add support of AudioScience ASI boards")
Signed-off-by: Valentina Goncharenko <goncharenko.vp@ispras.ru>
Link: https://lore.kernel.org/r/20220901102814.131855-1-goncharenko.vp@ispras.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace zero-length array
declaration in union audio_infoframe with the new DECLARE_FLEX_ARRAY()
helper macro.
This helper allows for a flexible-array member in a union.
Link: https://github.com/KSPP/linux/issues/193
Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/Yw01A+TvF1FWQ588@work
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For some reason two masks are used without the AZX prefix, and the
pattern MLCLT should be ML_LCTL for consistency.
Pure rename, no functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220822190044.170495-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since it was introduced around v2.6.30 it was never used. Also HDA
specification does not mention any limitation on number of PIN
configurations.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220818141517.109280-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If early probe of HDAudio bus driver fails e.g.: due to missing
firmware file, snd_hda_codec_shutdown() ends in manipulating
uninitialized codec->pcm_list_head causing page fault.
Initialization of HDAudio codec in ASoC is split in two:
- snd_hda_codec_device_init()
- snd_hda_codec_device_new()
snd_hda_codec_device_init() is called during probe_codecs() by HDAudio
bus driver while snd_hda_codec_device_new() is called by
codec-component's ->probe(). The second call will not happen until all
components required by related sound card are present within the ASoC
framework. With firmware failing to load during the PCI's deferred
initialization i.e.: probe_work(), no platform components are ever
registered. HDAudio codec enumeration is done at that point though, so
the codec components became registered to ASoC framework, calling
snd_hda_codec_device_init() in the process.
Now, during platform reboot snd_hda_codec_shutdown() is called for every
codec found on the HDAudio bus causing oops if any of them has not
completed both of their initialization steps. Relocating field
initialization fixes the issue.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220816111727.3218543-7-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With all HDAudio drivers aligned to make use of the same constructor,
have codec freed on the device release regardless of its type.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220816111727.3218543-5-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For devices which use HID CSC3551, correct ACPI _DSD properties are
required to be able support those systems.
Add error message to clarify this.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220815162906.463108-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
With jackpoll_in_suspend flag set, there is a possibility that
jack poll worker thread will run even after system suspend was
completed. Any register access after system pm callback flow
will result in kernel crash as still jack poll worker thread
tries to access registers.
To fix the crash issue during system flow, cancel the jack poll
worker thread during system pm prepare callback and cancel the
worker thread at start of runtime suspend callback and re-schedule
at last to avoid any unwarranted access of register by worker thread
during suspend flow.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Fixes: b33115bd05 ("ALSA: hda: Jack detection poll in suspend state")
Link: https://lore.kernel.org/r/20220811052704.2944-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 12,1 model requires the same configuration as the 12,2 model
to enable headphones but has a different codec SSID. Adds
12,1 SSID for matching quirk.
[ re-sorted in SSID order by tiwai ]
Signed-off-by: Allen Ballway <ballway@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220810152701.1.I902c2e591bbf8de9acb649d1322fa1f291849266@changeid
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Board ID 8786 seems to be another variant of the Omen 15 that needs
ALC285_FIXUP_HP_MUTE_LED for working mute LED.
Signed-off-by: Bedant Patnaik <bedant.patnaik@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220809142455.6473-1-bedant.patnaik@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is another LENOVO 20149 (Type1Sku0) Notebook model with
CX20590, the device PCI SSID is 17aa:3977, which headphones are
not responding, that requires the quirk CXT_PINCFG_LENOVO_NOTEBOOK.
Add the corresponding entry to the quirk table.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220808073406.19460-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The variable new is initialized with a value but it is never read. It is
being re-assigned a new value in every case path in the following switch
statement. The assignment is redundant and can be removed.
Cleans up clang scan build warning:
sound/pci/ice1712/quartet.c:569:8: warning: Although the value stored
to 'new' is used in the enclosing expression, the value is never actually
read from 'new' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220805120439.2341600-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is another Asus K42JZ model with the PCI SSID 1043:1313
that requires the quirk ALC269VB_FIXUP_ASUS_MIC_NO_PRESENCE.
Add the corresponding entry to the quirk table.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220805074534.20003-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes speaker output on HP Spectre x360 15-eb0xxx
[ re-sorted in SSID order by tiwai ]
Signed-off-by: Ivan Hasenkampf <ivan.hasenkampf@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220803164001.290394-1-ivan.hasenkampf@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co. This patch replaces those usages
straightforwardly with new helpers, sysfs_emit() and sysfs_emit_at().
Link: https://lore.kernel.org/r/20220801165639.26030-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Lenovo Yoga 9 14IAP7 is set up similarly to the Thinkpad X1 7th and
8th Gen. It also has the speakers attached to NID 0x14 and the bass
speakers to NID 0x17, but here the codec misreports the NID 0x17 as
unconnected.
The pincfg and hda verbs connect and activate the bass speaker
amplifiers, but the generic driver will connect them to NID 0x06 which
has no volume control. Set connection list/preferred connections is
required to gain volume control.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555
Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220729162103.6062-1-p.jungkamp@gmx.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two more HP laptops that use cs35l41 AMP for speaker and GPIO for mute
LEDs.
So use the existing quirk to enable them accordingly.
[ Sort the entries at the SSID order by tiwai ]
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220719142015.244426-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If CONFIG_PM_SLEEP is not set,
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-, will be failed, like this:
sound/pci/hda/cs35l41_hda.c:583:12: error: ‘cs35l41_runtime_resume’ defined but not used [-Werror=unused-function]
static int cs35l41_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~
sound/pci/hda/cs35l41_hda.c:565:12: error: ‘cs35l41_runtime_suspend’ defined but not used [-Werror=unused-function]
static int cs35l41_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[3]: *** [sound/pci/hda/cs35l41_hda.o] Error 1
commit 1a3c7bb088 ("PM: core: Add new *_PM_OPS macros,
deprecate old ones"), add new marco RUNTIME_PM_OPS to fix this unused-function problem.
Fixes: 1873ebd30c ("ALSA: hda: cs35l41: Support Hibernation during Suspend")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Link: https://lore.kernel.org/r/20220725023611.57055-1-renzhijie2@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the recent change in CS35L41 codec requires the reference of
acpi_dev handle, the current Kconfig may lead to a build breakage.
Revert the Kconfig change and re-introduce the hard dependency on
CONFIG_ACPI again as a temporary workaround.
Fixes: eef3759602 ("ALSA: hda: cs35l41: Support reading subsystem id from ACPI")
Link: https://lore.kernel.org/r/20220715182427.18891-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When codec is unbound but not yet removed, in the eyes of
snd_hdac_bus_process_unsol_events() it is still a valid target to
delegate work to. Such behaviour may lead to use-after-free errors.
Address by verifying if codec is actually registered.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-6-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
By default, the driver will automatically load DSP firmware
for the amps, if available. Adding this option allows the
autoload to be optional, which allows for different configurations.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-15-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is required to support CS35L41 calibration.
By default, speaker protection firmware will be loaded, if
available. However, different firmware is required to run
the calibration sequence, so it is necessary to add support
to be able to unload, switch and reload firmware.
This patch adds 2 ALSA Controls for each amp:
"DSP1 Firmware Load"
"DSP1 Firmware Type"
"DSP1 Firmware Load" can be used to unload and
load the firmware.
"DSP1 Firmware Type" can be used to switch the
target firmware to be loaded by "DSP1 Firmware Load"
Since loading firmware can add new ALSA controls, it is
necessary to ensure the firmware loading is run asynchronously
from the ALSA control itself to prevent deadlocks.
Note: When switching between firmwares, an ALSA control is
only added if it has not previously existed. If it had existed
previously, it will be re-enabled instead.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-14-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The config sequences for running with and without firmware and DSP
are different. The original behavior assumed that we would only
run without DSP only in the case where firmware load failed.
This meant the non-firmware sequence was written with the assumtion
that various registers would be set to their default value.
However, to support the ability to unload the firmware, the
non-firmware register sequence must be updated to update all
required registers, including values that would be defaulted,
in case the firmware sequence, which could have already run,
has changed their value.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-13-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Speaker Calibration data, specific to an individual speaker is
stored inside UEFI variables during calibration, and can be
used by the DSP.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-11-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CS35L41 supports hibernation during suspend when using
DSP firmware.
When the driver suspends it will hibernate the part, if
firmware is running, and resume will wake from hibernation.
CS35L41 driver will suspend/resume when requested by
hda driver.
Note that suspend/resume and hibernation is only supported
when firmware is running.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-10-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a big release thus far and there will probably be more changes
to come, it's a combination of a larger than usual crop of new drivers
and some subsysetm wide cleanups from Charles rather than anything
structural. The SOF and Intel DSP code both also continue to be very
actively developed.
- Restructing of the set_fmt() callbacks to be specified in terms of
the device rather than with semantics depending on if the device is
supposed to be a CODEC or SoC, making things clearer in situations
like CODEC to CODEC links.
- Clean up of the way we flag which DAI naming scheme we use to reflect
the progress that's been made modernising things.
- Merge of more of the Intel AVS driver stack, including some board
integrations.
- New version 4 mechanism for communication with SOF DSPs.
- Suppoort for dynamically selecting the PLL to use at runtime on i.MX
platforms.
- Improvements for CODEC to CODEC support in the generic cards.
- Support for AMD Jadeite and various machines, Intel MetorLake DSPs,
Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP
TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments
TAS2780.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmLRa6sACgkQJNaLcl1U
h9Bkvwf9HJRDLQ513AIAg8QJVZ4a+vAX4dirPUkpsyxRJ9WUdaOVdYiRIwDfMKQl
Y9gH8xN3/JcLThKDuCxbyndgXEbfhu+s55VerrJ1/KAlnxZoYXcCuc+PKr78ZNCq
goMQT3EcKiJXPEXcxZVMGMsK0XaoWNycKHm/wQ+27OF8kiFs58iRvnFk27HLgd6z
ucVF7Zmj+vABIS2eou+pAvAT2Ln9OraCdwjH26nSSZ3J8z4SIvsaJXJ5Fsasevpa
ExL+RIBXTG4Xs5MH60P0P6qNV3zIuiRkLTN2BZabr7R3OHE8eW4Vz6p2QQ70eZ9R
UdusEjJONjfHwoF9jD+QIk/zv9T/BA==
=oiKM
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.20' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v5.20
This is a big release thus far and there will probably be more changes
to come, it's a combination of a larger than usual crop of new drivers
and some subsysetm wide cleanups from Charles rather than anything
structural. The SOF and Intel DSP code both also continue to be very
actively developed.
- Restructing of the set_fmt() callbacks to be specified in terms of
the device rather than with semantics depending on if the device is
supposed to be a CODEC or SoC, making things clearer in situations
like CODEC to CODEC links.
- Clean up of the way we flag which DAI naming scheme we use to reflect
the progress that's been made modernising things.
- Merge of more of the Intel AVS driver stack, including some board
integrations.
- New version 4 mechanism for communication with SOF DSPs.
- Suppoort for dynamically selecting the PLL to use at runtime on i.MX
platforms.
- Improvements for CODEC to CODEC support in the generic cards.
- Support for AMD Jadeite and various machines, Intel MetorLake DSPs,
Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP
TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments
TAS2780.
Some Laptops use a number of gpios to define which vendor is
used for a particular laptop.
Different coefficient files are used for different vendors.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-9-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To be able to support different firmwares and tuning
for different models, the driver needs to be able to
load a different firmware and coefficient file based
on its Subsystem ID.
The driver attempts to load the firmware in the
following order:
/lib/firmware/cirrus/cs35l41-dsp1-<fw-type>-<ssid>-dev<#>.wmfw
/lib/firmware/cirrus/cs35l41-dsp1-<fw-type>-<ssid>.wmfw
/lib/firmware/cirrus/cs35l41-dsp1-<fw-type>.wmfw
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-8-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On some laptop models, the ACPI contains the unique
Subsystem ID, and this value should be preferred
over the value from the HDA driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-7-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Subsystem ID is read from the HDA driver, and will
be used by the CS35L41 driver to be able to uniquely
identify the laptop, which is required to be able to
define firmware to be used by specific models.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-6-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds support for the CS35L41 DSP.
The DSP allows for extra features, such as running
speaker protection algorithms and hibernations.
To utilize these features, the driver must load
firmware into the DSP, as well as various tuning
files which allow for customization for specific
models.
[ Slightly simplified Kconfig changes by tiwai ]
Signed-off-by: Vitaly Rodionov <vitaly.rodionov@cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-5-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DSP controls are exposed as ALSA controls, however,
some of these controls are required to be accessed by
the driver. Add apis which allow read/write of these
controls. The write api will also notify the ALSA control
on value change.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-3-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The cs35l41 part contains a DSP which is able to run firmware.
The cs_dsp library can be used to control the DSP.
These controls can be exposed to userspace using ALSA controls.
This library adds apis to be able to interface between
cs_dsp and hda drivers and expose the relevant controls as
ALSA controls.
[ Note: the dependency of CONFIG_SND_HDA_CS_DSP_CONTROLS Kconfig is
corrected. Also, this Kconfig isn't enabled now but will be
actually enabled in a later patch -- tiwai ]
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-2-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The headset on this machine is not defined, after applying the quirk
ALC256_FIXUP_ASUS_HEADSET_MIC, the headset-mic works well
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713094133.9894-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On a HP 288 Pro G2 MT (X9W02AV), the front mic could not be detected.
In order to get it working, the pin configuration needs to be set
correctly, and the ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE fixup needs
to be applied.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713063332.30095-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP ProBook 440/450 G9 and EliteBook 640/650 G9 have multiple
motherboard design and they are using different subsystem ID of audio
codec. Add the same quirk for other MBs.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713022706.22892-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Selections can be propagated via selections, while dependencies are not.
Hence, consolidate selections under the SND_HDA_SCODEC_CS35L41 option.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220712153519.35692-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.
Instead of adding ifdeffery or attribute here and there, drop ACPI_PTR().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220712153519.35692-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On a HP 288 Pro G6, the front mic could not be detected.In order to
get it working, the pin configuration needs to be set correctly, and
the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220712092222.21738-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The comments are inconsistent and point to the wrong driver name.
The initially named i2c-multi-instantiate it was renamed to the
serial-multi-instantiate exactly due to support of the platforms
with multiple CS35L41 codecs.
Fix comments accordingly.
While at it, drop file names from the files.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220711100129.37326-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Another Dell model, another fixup entry: Latitude E5430 needs the same
fixup as other Latitude E series as workaround for noise problems.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220712060005.20176-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is another HP ProDesk 600 G3 model with the PCI SSID 103c:82b4
that requires the quirk HP_MIC_NO_PRESENCE. Add the corresponding
entry to the quirk table.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220711101744.25189-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The issue on Acer SWIFT SF313-51 is that headset microphone
doesn't work. The following quirk fixed headset microphone issue.
Note that the fixup of SF314-54/55 (ALC256_FIXUP_ACER_HEADSET_MIC)
was not successful on my SF313-51.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220711081527.6254-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If early probe of HDAudio bus driver fails e.g.: due to missing
firmware file, snd_hda_codec_shutdown() ends in manipulating
uninitialized codec->pcm_list_head causing page fault.
Iinitialization of HDAudio codec in ASoC is split in two:
- snd_hda_codec_device_init()
- snd_hda_codec_device_new()
snd_hda_codec_device_init() is called during probe_codecs() by HDAudio
bus driver while snd_hda_codec_device_new() is called by
codec-component's ->probe(). The second call will not happen until all
components required by related sound card are present within the ASoC
framework. With firmware failing to load during the PCI's deferred
initialization i.e.: probe_work(), no platform components are ever
registered. HDAudio codec enumeration is done at that point though, so
the codec components became registered to ASoC framework, calling
snd_hda_codec_device_init() in the process.
Now, during platform reboot snd_hda_codec_shutdown() is called for every
codec found on the HDAudio bus causing oops if any of them has not
completed both of their initialization steps. Relocating field
initialization fixes the issue.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-7-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AVS HDAudio bus driver does not tie with codec drivers tighly. Codec
device and its respective driver cleanup procedures are split and may
not occur one after the other. Device cleanup is performed only on
snd_hdac_ext_bus_device_remove() i.e. it's the bus driver's
responsibility. If codec component probing fails, put_device() found in
snd_hda_codec_device_new() may lead to page fault. Relocate it to
snd_hda_codec_new() to address the problem on ASoC side while keeping
status quo for snd_hda_intel.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-5-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AVS HDAudio bus driver does not tie with codec drivers tighly and
snd_hda_codec_device_new() can be called after codec's module reload. In
such case, rpm is forbidden and invoking pm_runtime_forbid()
unconditionally causes device's usage_count to become unbalanced. This
is later caught by WARN_ON() found in sound/soc/hda.c. Detect such
circumstance and bump the usage_count instead.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If snd_hda_hdmi_codec module is denylisted and any event causes i915
enumeration to fail, is_likely_hdmi_codec() ends in null-ptr-deref.
As snd_soc_hda is an ASoC-based driver, its initialization is delayed
until all the necessary components appear in the system - allowing
actual sound card to enumerate. snd_hda_codec_configure() gets called by
the avs-driver core during probe_codecs() but the
snd_hda_codec_device_new(), necessary to complete codecs initialization,
happens only when codec-component of hda sound card is being probed.
Denylisting snd_hda_codec_hdmi module causes snd_hda_codec_configure()
to reach: codec_bind_generic() -> is_likely_hdmi_codec() which makes use
of ->wcaps and at this point the it isn't initialized yet - again,
requires completion of snd_hda_codec_device_new().
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-3-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous cleanup with devres may lead to the incorrect release
orders at the probe error handling due to the devres's nature. Until
we register the card, snd_card_free() has to be called at first for
releasing the stuff properly when the driver tries to manage and
release the stuff via card->private_free().
This patch fixes it by calling snd_card_free() manually on the error
from the probe callback.
Fixes: 5bff69b364 ("ALSA: cs46xx: Allocate resources with device-managed APIs")
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Jan Engelhardt <jengelh@inai.de>
Link: https://lore.kernel.org/r/p2p1s96o-746-74p4-s95-61qo1p7782pn@vanv.qr
Link: https://lore.kernel.org/r/20220705152336.350-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
sparse reports
sound/pci/hda/patch_cs8409-tables.c:79:25: warning: symbol 'cs8409_cs42l42_pincfgs_no_dmic' was not declared. Should it be static?
cs8409_cs42l42_pincfgs_no_dmic is only used by cs8409_fixups table as an
initializer for the hda_fixup element v.pins. Both are defined in the
patch_cs8408-table.c file but only cs8409_fixups is used externally in
patch_cs8409.c. So cs8409_cs42l42_pincfgs_no_dmic should have a static
storage class specifier.
The other v.pins initializers in cs8409_fixups table, though declared
extern in patch_cs8409.h are also only used in patch_cs8409-tables.c.
So change all the v.pins initializers to static.
Fixes: 9e7647b507 ("ALSA: hda/cs8409: Move arrays of configuration to a new file")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220704142836.636204-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The alsa-project documentation is now part of the kernel docs,
the original links are long dead, update links.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220628165807.152191-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the Conexant codec driver sets up the beep NID after calling
snd_hda_gen_parse_auto_config(). It turned out that this results in
the insufficient setup for the beep control, as the generic parser
handles the fake path in snd_hda_gen_parse_auto_config() only if the
beep_nid is set up beforehand.
For dealing with the beep widget properly, call cx_auto_parse_beep()
before snd_hda_gen_parse_auto_config() call.
Fixes: 51e19ca5f7 ("ALSA: hda/conexant - Clean up beep code")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152
Link: https://lore.kernel.org/r/20220620104008.1994-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It turned out that Lenovo shipped two completely different products
with the very same PCI SSID, where both require different quirks;
namely, Lenovo C940 has already the fixup for its speaker
(ALC298_FIXUP_LENOVO_SPK_VOLUME) with the PCI SSID 17aa:3818, while
Yoga Duet 7 has also the very same PCI SSID but requires a different
quirk, ALC287_FIXUP_YOGA7_14TIL_SPEAKERS.
Fortunately, both are with different codecs (C940 with ALC298 and Duet
7 with ALC287), hence we can apply different fixes by checking the
codec ID. This patch implements that special fixup function.
For easier handling, the internal function for applying a specific
fixup entry is exported as __snd_hda_apply_fixup(), so that it can be
called from the codec driver. The rest is simply calling it with a
different fixup ID depending on the codec ID.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: nikitashvets@flyium.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5ca147d1-3a2d-60c6-c491-8aa844183222@redhat.com
Link: https://lore.kernel.org/r/20220614054831.14648-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is not have Headset Mic verb table in BIOS default.
So, it will have recording issue from headset MIC.
Add the verb table value without jack detect. It will turn on Headset Mic.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/719133a27d8844a890002cb817001dfa@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP Omen 15 laptop needs a quirk to toggle the mute LED. It already is implemented for a different variant of the HP Omen laptop so a fixup entry is needed for this variant.
Signed-off-by: Soham Sen <contact@sohamsen.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220609181919.45535-1-contact@sohamsen.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enables the audio mute LEDs and limits the mic boost to avoid picking up
noise.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220608140111.23170-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added the support of new Huawei codec HW8326. The HW8326 is developed
by Huawei with Realtek's IP Core, and it's compatible with ALC256.
Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Link: https://lore.kernel.org/r/20220608082357.26898-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add HD Audio PCI ID for Intel Meteorlake platform.
[ corrected the hex number to lower letters by tiwai ]
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220606204232.144296-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Set microphone pins 0x18 (rear) and 0x19 (front) to VREF_50 to fix the
microphone noise on ASUS TUF B550M-PLUS which uses the ALCS1200A codec.
The initial value was VREF_80.
The same issue is also present on Windows using both the default Windows
driver and all tested Realtek drivers before version 6.0.9049.1. Comparing
Realtek driver 6.0.9049.1 (the first one without the microphone noise) to
Realtek driver 6.0.9047.1 (the last one with the microphone noise)
revealed that the fix is the result of setting pins 0x18 and 0x19 to
VREF_50.
This fix may also work for other boards that have been reported to have
the same microphone issue and use the ALC1150 and ALCS1200A codecs, since
these codecs are similar and the fix in the Realtek driver on Windows is
common for both. However, it is currently enabled only for ASUS TUF
B550M-PLUS as this is the only board that could be tested.
Signed-off-by: Marios Levogiannis <marios.levogiannis@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220530074131.12258-1-marios.levogiannis@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
