With certain kernel configurations, CPU offline consumes more than
100ms during S3.
It's a timing related issue: native_cpu_die() would occasionally fall
into a 100ms sleep when the CPU idle loop thread marked the CPU state
to DEAD too slowly.
What native_cpu_die() does is that it polls the CPU state and waits
for 100ms if CPU state hasn't been marked to DEAD. The 100ms sleep
doesn't make sense and is purely historic.
To avoid such long sleeping, this patch adds a 'struct completion'
to each CPU, waits for the completion in native_cpu_die() and wakes
up the completion when the CPU state is marked to DEAD.
Tested on an Intel Xeon server with 48 cores, Ivybridge and on
Haswell laptops. The CPU offlining cost on these machines is
reduced from more than 100ms to less than 5ms. The system
suspend time is reduced by 2.3s on the servers.
Borislav and Prarit also helped to test the patch on an AMD
machine and a few systems of various sizes and configurations
(multi-socket, single-socket, no hyper threading, etc.). No
issues were seen.
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: srostedt@redhat.com
Cc: toshi.kani@hp.com
Cc: imammedo@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1409039025-32310-1-git-send-email-tianyu.lan@intel.com
[ Improved a few minor details in the code, cleaned up the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch restructures the memory controller (IMC) uncore PMU support
for client SNB/IVB/HSW processors. The main change is that it can now
cope with more than one PCI device ID per processor model. There are
many flavors of memory controllers for each processor. They have
different PCI device ID, yet they behave the same w.r.t. the memory
controller PMU that we are interested in.
The patch now supports two distinct memory controllers for IVB
processors: one for mobile, one for desktop.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140917090616.GA11281@quad
Cc: ak@linux.intel.com
Cc: kan.liang@intel.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The PCU frequency band filters use 8 bit each in a register.
When setting up the value the shift value was not correctly
scaled, which resulted in all filters except for band 0 to
be zero. Fix the scaling.
This allows to correctly monitor multiple uncore frequency bands.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1409872109-31645-5-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The IvyBridge-EP uncore driver was missing three filter flags:
NC, ISOC, C6 which are useful in some cases. Support them in the same way
as the Haswell EP driver, by allowing to set them and exposing
them in the sysfs formats.
Also fix a typo in a define.
Relies on the Haswell EP driver to be applied earlier.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1409872109-31645-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Current code registers PMUs for all possible uncore pci devices.
This is not good because, on some machines, one or more uncore pci
devices can be missing. The missing pci device make corresponding
PMU unusable. Register the PMU only if the uncore device exists.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1409872109-31645-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The uncore subsystem in Haswell-EP is similar to Sandy/Ivy
Bridge-EP. There are some differences in config register
encoding and pci device IDs. The Haswell-EP uncore also
supports a few new events. Add the Haswell-EP driver to
the snbep split driver.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
[ Add missing break. Add imc events. Add cbox nc/isoc/c6. ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1409872109-31645-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the newly added Broadwell cache event list for Haswell too.
All Haswell and Broadwell events and offcore masks used in these lists
are identical.
However Haswell is very different from the Sandy Bridge
list that was used previously. That fixes a wide range of mis-counting
cache events.
The node events are now only for retired memory events, so prefetching
and speculative memory accesses are not included. They are PEBS
capable now, which makes it much easier to sample for them, plus it's
possible to create address maps with -d.
The prefetch events are gone now. They way the hardware counts
them is very misleading (some prefetches included, others not), so
it seemed best to leave them out.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1409683455-29168-5-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On Broadwell INST_RETIRED.ALL cannot be used with any period
that doesn't have the lowest 6 bits cleared. And the period
should not be smaller than 128.
Add a new callback to enforce this, and set it for Broadwell.
This is erratum BDM57 and BDM11.
How does this handle the case when an app requests a specific
period with some of the bottom bits set
The apps thinks it is sampling at X occurences per sample, when it is
in fact at X - 63 (worst case).
Short answer:
Any useful instruction sampling period needs to be 4-6 orders
of magnitude larger than 128, as an PMI every 128 instructions
would instantly overwhelm the system and be throttled.
So the +-64 error from this is really small compared to the
period, much smaller than normal system jitter.
Long answer:
<write up by Peter:>
IFF we guarantee perf_event_attr::sample_period >= 128.
Suppose we start out with sample_period=192; then we'll set period_left
to 192, we'll end up with left = 128 (we truncate the lower bits). We
get an interrupt, find that period_left = 64 (>0 so we return 0 and
don't get an overflow handler), up that to 128. Then we trigger again,
at n=256. Then we find period_left = -64 (<=0 so we return 1 and do get
an overflow). We increment with sample_period so we get left = 128. We
fire again, at n=384, period_left = 0 (<=0 so we return 1 and get an
overflow). And on and on.
So while the individual interrupts are 'wrong' we get then with
interval=256,128 in exactly the right ratio to average out at 192. And
this works for everything >=128.
So the num_samples*fixed_period thing is still entirely correct +- 127,
which is good enough I'd say, as you already have that error anyhow.
So no need to 'fix' the tools, al we need to do is refuse to create
INST_RETIRED:ALL events with sample_period < 128.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Cc: Mark Davies <junk@eslaf.co.uk>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1409683455-29168-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add Broadwell support for Broadwell Client to perf. This is very
similar to Haswell. It uses a new cache event table, because there
were various changes there.
The constraint list has one new event that needs to be handled over
Haswell.
The PEBS event list is the same, so we reuse Haswell's.
[fengguang.wu: make intel_bdw_event_constraints[] static]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1409683455-29168-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
71 is a Broadwell, not a Haswell. The model number was added
by mistake earlier.
Remove it for now, until it can be re-added later with
real Broadwell support.
In practice it does not cause a lot of issues because the Broadwell
PMU is very similar to Haswell, but some details were wrong,
and it's better to handle it correctly.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: http://lkml.kernel.org/r/1409683455-29168-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I'm getting the spew below when booting with Haswell (Xeon
E5-2699 v3) CPUs and the "Cluster-on-Die" (CoD) feature enabled
in the BIOS. It seems similar to the issue that some folks from
AMD ran in to on their systems and addressed in this commit:
161270fc1f ("x86/smp: Fix topology checks on AMD MCM CPUs")
Both these Intel and AMD systems break an assumption which is
being enforced by topology_sane(): a socket may not contain more
than one NUMA node.
AMD special-cased their system by looking for a cpuid flag. The
Intel mode is dependent on BIOS options and I do not know of a
way which it is enumerated other than the tables being parsed
during the CPU bringup process. In other words, we have to trust
the ACPI tables <shudder>.
This detects the situation where a NUMA node occurs at a place in
the middle of the "CPU" sched domains. It replaces the default
topology with one that relies on the NUMA information from the
firmware (SRAT table) for all levels of sched domains above the
hyperthreads.
This also fixes a sysfs bug. We used to freak out when we saw
the "mc" group cross a node boundary, so we stopped building the
MC group. MC gets exported as the 'core_siblings_list' in
/sys/devices/system/cpu/cpu*/topology/ and this caused CPUs with
the same 'physical_package_id' to not be listed together in
'core_siblings_list'. This violates a statement from
Documentation/ABI/testing/sysfs-devices-system-cpu:
core_siblings: internal kernel map of cpu#'s hardware threads
within the same physical_package_id.
core_siblings_list: human-readable list of the logical CPU
numbers within the same physical_package_id as cpu#.
The sysfs effects here cause an issue with the hwloc tool where
it gets confused and thinks there are more sockets than are
physically present.
Before this patch, there are two packages:
# cd /sys/devices/system/cpu/
# cat cpu*/topology/physical_package_id | sort | uniq -c
18 0
18 1
But 4 _sets_ of core siblings:
# cat cpu*/topology/core_siblings_list | sort | uniq -c
9 0-8
9 18-26
9 27-35
9 9-17
After this set, there are only 2 sets of core siblings, which
is what we expect for a 2-socket system.
# cat cpu*/topology/physical_package_id | sort | uniq -c
18 0
18 1
# cat cpu*/topology/core_siblings_list | sort | uniq -c
18 0-17
18 18-35
Example spew:
...
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2#3#4#5#6#7#8
.... node #1, CPUs: #9
------------[ cut here ]------------
WARNING: CPU: 9 PID: 0 at /home/ak/hle/linux-hle-2.6/arch/x86/kernel/smpboot.c:306 topology_sane.isra.2+0x74/0x90()
sched: CPU #9's mc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
Modules linked in:
CPU: 9 PID: 0 Comm: swapper/9 Not tainted 3.17.0-rc1-00293-g8e01c4d-dirty #631
Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS GRNDSDP1.86B.0036.R05.1407140519 07/14/2014
0000000000000009 ffff88046ddabe00 ffffffff8172e485 ffff88046ddabe48
ffff88046ddabe38 ffffffff8109691d 000000000000b001 0000000000000009
ffff88086fc12580 000000000000b020 0000000000000009 ffff88046ddabe98
Call Trace:
[<ffffffff8172e485>] dump_stack+0x45/0x56
[<ffffffff8109691d>] warn_slowpath_common+0x7d/0xa0
[<ffffffff8109698c>] warn_slowpath_fmt+0x4c/0x50
[<ffffffff81074f94>] topology_sane.isra.2+0x74/0x90
[<ffffffff8107530e>] set_cpu_sibling_map+0x31e/0x4f0
[<ffffffff8107568d>] start_secondary+0x1ad/0x240
---[ end trace 3fe5f587a9fcde61 ]---
#10#11#12#13#14#15#16#17
.... node #2, CPUs: #18#19#20#21#22#23#24#25#26
.... node #3, CPUs: #27#28#29#30#31#32#33#34#35
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
[ Added LLC domain and s/match_mc/match_die/ ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: brice.goglin@gmail.com
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/20140918193334.C065EBCE@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On x86_64, kernel text mappings are mapped read-only with CONFIG_DEBUG_RODATA.
In that case, KVM will fail to patch VMCALL instructions to VMMCALL
as required on AMD processors.
The failure mode is currently a divide-by-zero exception, which obviously
is a KVM bug that has to be fixed. However, picking the right instruction
between VMCALL and VMMCALL will be faster and will help if you cannot upgrade
the hypervisor.
Reported-by: Chris Webb <chris@arachsys.com>
Tested-by: Chris Webb <chris@arachsys.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the arch is found locally in __audit_syscall_entry(), there is no need to
pass it in as a parameter. Delete it from the parameter list.
x86* was the only arch to call __audit_syscall_entry() directly and did so from
assembly code.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-audit@redhat.com
Signed-off-by: Eric Paris <eparis@redhat.com>
---
As this patch relies on changes in the audit tree, I think it
appropriate to send it through my tree rather than the x86 tree.
Pull perf fixes from Ingo Molnar:
"Two kernel side fixes: a kprobes fix and a perf_remove_from_context()
fix (which does not yet fix the migration bug which is WIP)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix a race condition in perf_remove_from_context()
kprobes/x86: Free 'optinsn' cache when range check fails
Makes the IOSF sideband available through debugfs. Allows
developers to experiment with using the sideband to provide
debug and analytical tools for units on the SoC.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: http://lkml.kernel.org/r/1411017231-20807-4-git-send-email-david.e.box@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When compiling with CONFIG_DEBUG_FS=n, GCC emits an unused
variable warning for pmc_atom.c because "ret" is used only
within the CONFIG_DEBUG_FS block.
This patch adds a dummy #ifdef for pmc_dbgfs_register() when
CONFIG_DEBUG_FS=n to simplify the code and remove the warning.
Signed-off-by: Martin Kelly <martkell@amazon.com>
Acked-by: "Li, Aubrey" <aubrey.li@linux.intel.com>
Cc: vishwesh.m.rudramuni@intel.com
Link: http://lkml.kernel.org/r/1410963476-8360-1-git-send-email-martin@martingkelly.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
intel_init_thermal() is called from a) at the time of system initializing
and b) at the time of system resume to initialize thermal
monitoring.
In case when thermal monitoring is handled by SMI, we get to know it via
printk(). Currently it gives the message at both cases, but its okay if
we get it only once and no need to get the same message at every time
system resumes.
So, limit showing this message only at system boot time by avoid showing
at system resume and reduce abusing kernel log buffer.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1411068135.5121.10.camel@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Hang is observed on virtual machines during CPU hotplug,
especially in big guests with many CPUs. (It reproducible
more often if host is over-committed).
It happens because master CPU gives up waiting on
secondary CPU and allows it to run wild. As result
AP causes locking or crashing system. For example
as described here:
https://lkml.org/lkml/2014/3/6/257
If master CPU have sent STARTUP IPI successfully,
and AP signalled to master CPU that it's ready
to start initialization, make master CPU wait
indefinitely till AP is onlined.
To ensure that AP won't ever run wild, make it
wait at early startup till master CPU confirms its
intention to wait for AP. If AP doesn't respond in 10
seconds, the master CPU will timeout and cancel
AP onlining.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1403266991-12233-1-git-send-email-imammedo@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In arch/x86/kernel/setup.c::trim_bios_range(), the codes
introduced by 1b5576e6 (base on d8a9e6a5), it updates the first
4Kb of memory to be E820_RESERVED region. That's because it's a
BIOS owned area but generally not listed in the E820 table:
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000096fff] usable
BIOS-e820: [mem 0x0000000000097000-0x0000000000097fff] reserved
...
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
But the region of first 4Kb didn't register to nosave memory:
PM: Registered nosave memory: [mem 0x00097000-0x00097fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
The code in e820_mark_nosave_regions() assumes the first e820
area to be RAM, so it causes the first 4Kb E820_RESERVED region
ignored when register to nosave. This patch removed assumption
of the first e820 area.
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <len.brown@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: http://lkml.kernel.org/r/1410491038-17576-1-git-send-email-jlee@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As the Soekris net6501 and other e6xx based systems do not have
any ACPI implementation, HPET won't get enabled.
This patch enables HPET on such platforms.
[ 0.430149] pci 0000:00:01.0: Force enabled HPET at 0xfed00000
[ 0.644838] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Original patch by Peter Neubauer (http://www.mail-archive.com/soekris-tech@lists.soekris.com/msg06462.html)
slightly modified by Conrad Kostecki <ck@conrad-kostecki.de> and massaged
accoring to Thomas Gleixners <tglx@linutronix.de> by me.
Suggested-by: Conrad Kostecki <ck@conrad-kostecki.de>
Signed-off-by: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Cc: Peter Neubauer <pneubauer@bluerwhite.org>
Link: http://lkml.kernel.org/r/5412D3A5.2030909@lsexperts.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
x86 supports irq work self-IPIs when local apic is available. This is
partly known on runtime so lets implement arch_irq_work_has_interrupt()
accordingly.
This should be safely called after setup_arch().
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The original motivation for these patches was for an Intel CPU
feature called MPX. The patch to add a disabled feature for it
will go in with the other parts of the support.
But, in the meantime, there are a few other features than MPX
that we can make assumptions about at compile-time based on
compile options. Add them to disabled-features.h and check them
with cpu_feature_enabled().
Note that this gets rid of the last things that needed an #ifdef
CONFIG_X86_64 in cpufeature.h. Yay!
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140911211524.C0EC332A@viggo.jf.intel.com
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
cpu_has_pae is only referenced in one place: the X86_32 kexec
code (in a file not even built on 64-bit). It hardly warrants
its own macro, or the trouble we go to ensuring that it can't
be called in X86_64 code.
Axe the macro and replace it with a direct cpu feature check.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140911211511.AD76E774@viggo.jf.intel.com
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The new split Intel uncore driver code that recently went
into tip added a section mismatch, which the build process
complains about.
uncore_pmu_register() can be called from uncore_pci_probe,()
which is not __init and can be called from pci driver ->probe.
I'm not fully sure if it's actually possible to call the probe
function later, but it seems safer to mark uncore_pmu_register
not __init.
This also fixes the warning.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1409332858-29039-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A few of the initialization functions are missing the __init annotation.
Fix this and thereby allow ~680 additional bytes of code to be released
after initialization.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1409071785-26015-1-git-send-email-minipli@googlemail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A commit in linux-next was causing boot to fail and bisection
identified the patch 4ba2968420 ("percpu: Resolve ambiguities in
__get_cpu_var/cpumask_var_"). One of the changes in that patch looks
very suspicious. Reverting the full patch fixes boot as does this
fixlet.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
On KVM on my box, this reduces the overhead from an always-accept
seccomp filter from ~130ns to ~17ns. Most of that comes from
avoiding IRET on every syscall when seccomp is enabled.
In extremely approximate hacked-up benchmarking, just bypassing IRET
saves about 80ns, so there's another 43ns of savings here from
simplifying the seccomp path.
The diffstat is also rather nice :)
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/a3dbd267ee990110478d349f78cccfdac5497a84.1409954077.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
For slowpath syscalls, we initialize regs->ax to -ENOSYS and stick
the syscall number into regs->orig_ax prior to any possible tracing
and syscall execution. This is user-visible ABI used by ptrace
syscall emulation and seccomp.
For fastpath syscalls, there's no good reason not to do the same
thing. It's even slightly simpler than what we're currently doing.
It probably has no measureable performance impact. It should have
no user-visible effect.
The purpose of this patch is to prepare for two-phase syscall
tracing, in which the first phase might modify the saved RAX without
leaving the fast path. This change is just subtle enough that I'm
keeping it separate.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/01218b493f12ae2f98034b78c9ae085e38e94350.1409954077.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This splits syscall_trace_enter into syscall_trace_enter_phase1 and
syscall_trace_enter_phase2. Only phase 2 has full pt_regs, and only
phase 2 is permitted to modify any of pt_regs except for orig_ax.
The intent is that phase 1 can be called from the syscall fast path.
In this implementation, phase1 can handle any combination of
TIF_NOHZ (RCU context tracking), TIF_SECCOMP, and TIF_SYSCALL_AUDIT,
unless seccomp requests a ptrace event, in which case phase2 is
forced.
In principle, this could yield a big speedup for TIF_NOHZ as well as
for TIF_SECCOMP if syscall exit work were similarly split up.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/2df320a600020fda055fccf2b668145729dd0c04.1409954077.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The RCU context tracking code requires that arch code call
user_exit() on any entry into kernel code if TIF_NOHZ is set. This
patch adds a check for TIF_NOHZ and a comment to the syscall entry
tracing code.
The main purpose of this patch is to make the code easier to follow:
one can read the body of user_exit and of every function it calls
without finding any explanation of why it's called for traced
syscalls but not for untraced syscalls. This makes it clear when
user_exit() is necessary.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/0b13e0e24ec0307d67ab7a23b58764f6b1270116.1409954077.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
is_compat_task() is the wrong check for audit arch; the check should
be is_ia32_task(): x32 syscalls should be AUDIT_ARCH_X86_64, not
AUDIT_ARCH_I386.
CONFIG_AUDITSYSCALL is currently incompatible with x32, so this has
no visible effect.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/a0138ed8c709882aec06e4acc30bfa9b623b8717.1409954077.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The secure_computing function took a syscall number parameter, but
it only paid any attention to that parameter if seccomp mode 1 was
enabled. Rather than coming up with a kludge to get the parameter
to work in mode 2, just remove the parameter.
To avoid churn in arches that don't have seccomp filters (and may
not even support syscall_get_nr right now), this leaves the
parameter in secure_computing_strict, which is now a real function.
For ARM, this is a bit ugly due to the fact that ARM conditionally
supports seccomp filters. Fixing that would probably only be a
couple of lines of code, but it should be coordinated with the audit
maintainers.
This will be a slight slowdown on some arches. The right fix is to
pass in all of seccomp_data instead of trying to make just the
syscall nr part be fast.
This is a prerequisite for making two-phase seccomp work cleanly.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: x86@kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Both 32bit and 64bit versions of copy_thread() do memset(ptrace_bps)
twice for no reason, kill the 2nd memset().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175733.GA21676@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cosmetic, but I think thread.fpu_counter should be initialized in
arch_dup_task_struct() too, along with other "fpu" variables. And
probably it make sense to turn it into thread.fpu->counter.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175730.GA21669@redhat.com
Reviewed-by: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cosmetic, but imho memset(&dst->thread.fpu, 0) is not good simply
because it hides the (important) usage of ->has_fpu/etc from grep.
Change this code to initialize the members explicitly.
And note that ->last_cpu = 0 looks simply wrong, this can confuse
fpu_lazy_restore() if per_cpu(fpu_owner_task, 0) has already exited
and copy_process() re-allocated the same task_struct. Fortunately
this is not actually possible because child->fpu_counter == 0 and
thus fpu_lazy_restore() will not be called, but still this is not
clean/robust.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175727.GA21666@redhat.com
Reviewed-by: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
arch_dup_task_struct() copies thread.fpu if fpu_allocated(), this
looks suboptimal and misleading. Say, a forking process could use
FPU only once in a signal handler but now tsk_used_math(src) == F,
in this case the child gets a copy of fpu->state for no reason. The
child won't use the saved registers anyway even if it starts to use
FPU, this can only avoid fpu_alloc() in do_device_not_available().
Change this code to check tsk_used_math(current) instead. We still
need to clear fpu->has_fpu/state, we could do this memset(0) under
fpu_allocated() check but I think this doesn't make sense. See also
the next change.
use_eager_fpu() assumes that fpu_allocated() is always true, but a
forking task (and thus its child) must always have PF_USED_MATH set,
otherwise the child can either use FPU without used_math() (note that
switch_fpu_prepare() doesn't do stts() in this case), or it will be
killed by do_device_not_available()->BUG_ON(use_eager_fpu).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175723.GA21659@redhat.com
Reviewed-by: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Add preempt_disable() + preempt_enable() around math_state_restore() in
__restore_xstate_sig(). Otherwise __switch_to() after __thread_fpu_begin()
can overwrite fpu->state we are going to restore.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175717.GA21649@redhat.com
Cc: <stable@vger.kernel.org> # v3.7+
Reviewed-by: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Set the IRQCHIP_SKIP_SET_WAKE for IOAPIC IRQ chip objects so that
interrupts from them can work as wakeup interrupts for suspend-to-idle.
After this change, running enable_irq_wake() on one of the IRQs in
question will succeed and IRQD_WAKEUP_STATE will be set for it, so
all of the suspend-to-idle wakeup mechanics introduced previously
will work for it automatically.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull x86 fixes from Peter Anvin:
"One patch to avoid assigning interrupts we don't actually have on
non-PC platforms, and two patches that addresses bugs in the new
IOAPIC assignment code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, irq, PCI: Keep IRQ assignment for runtime power management
x86: irq: Fix bug in setting IOAPIC pin attributes
x86: Fix non-PC platform kernel crash on boot due to NULL dereference
Currently new system call kexec_file_load() and all the associated code
compiles if CONFIG_KEXEC=y. But new syscall also compiles purgatory
code which currently uses gcc option -mcmodel=large. This option seems
to be available only gcc 4.4 onwards.
Hiding new functionality behind a new config option will not break
existing users of old gcc. Those who wish to enable new functionality
will require new gcc. Having said that, I am trying to figure out how
can I move away from using -mcmodel=large but that can take a while.
I think there are other advantages of introducing this new config
option. As this option will be enabled only on x86_64, other arches
don't have to compile generic kexec code which will never be used. This
new code selects CRYPTO=y and CRYPTO_SHA256=y. And all other arches had
to do this for CONFIG_KEXEC. Now with introduction of new config
option, we can remove crypto dependency from other arches.
Now CONFIG_KEXEC_FILE is available only on x86_64. So whereever I had
CONFIG_X86_64 defined, I got rid of that.
For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to
"depends on CRYPTO=y". This should be safer as "select" is not
recursive.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Tested-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now IOAPIC driver dynamically allocates IRQ numbers for IOAPIC pins.
We need to keep IRQ assignment for PCI devices during runtime power
management, otherwise it may cause failure of device wakeups.
Commit 3eec595235 "x86, irq, PCI: Keep IRQ assignment for PCI
devices during suspend/hibernation" has fixed the issue for suspend/
hibernation, we also need the same fix for runtime device sleep too.
Fix: https://bugzilla.kernel.org/show_bug.cgi?id=83271
Reported-and-Tested-by: EmanueL Czirai <amanual@openmailbox.org>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: EmanueL Czirai <amanual@openmailbox.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Grant Likely <grant.likely@linaro.org>
Link: http://lkml.kernel.org/r/1409304383-18806-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
__get_cpu_var can paper over differences in the definitions of
cpumask_var_t and either use the address of the cpumask variable
directly or perform a fetch of the address of the struct cpumask
allocated elsewhere. This is important particularly when using per cpu
cpumask_var_t declarations because in one case we have an offset into
a per cpu area to handle and in the other case we need to fetch a
pointer from the offset.
This patch introduces a new macro
this_cpu_cpumask_var_ptr()
that is defined where cpumask_var_t is defined and performs the proper
actions. All use cases where __get_cpu_var is used with cpumask_var_t
are converted to the use of this_cpu_cpumask_var_ptr().
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch frees the 'optinsn' slot when we get a range check error,
to prevent memory leaks.
Before this patch, cache entry in kprobe_insn_cache() won't be freed
if kprobe optimizing fails due to range check failure.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Pei Feiyue <peifeiyue@huawei.com>
Link: http://lkml.kernel.org/r/1406550019-70935-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 15a3c7cc91 "x86, irq: Introduce two helper functions
to support irqdomain map operation" breaks LPSS ACPI enumerated
devices.
On startup, IOAPIC driver preallocates IRQ descriptors and programs
IOAPIC pins with default level and polarity attributes for all legacy
IRQs. Later legacy IRQ users may fail to set IOAPIC pin attributes
if the requested attributes conflicts with the default IOAPIC pin
attributes. So change mp_irqdomain_map() to allow the first legacy IRQ
user to reprogram IOAPIC pin with different attributes.
Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1409118795-17046-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Upstream commit:
95d76acc75 ("x86, irq: Count legacy IRQs by legacy_pic->nr_legacy_irqs instead of NR_IRQS_LEGACY")
removed reserved interrupts for the platforms that do not have a legacy IOAPIC.
Which breaks the boot on Intel MID platforms such as Medfield:
BUG: unable to handle kernel NULL pointer dereference at 0000003a
IP: [<c107079a>] setup_irq+0xf/0x4d [ 0.000000] *pdpt = 0000000000000000 *pde = 9bbf32453167e510
The culprit is an uncoditional setting of IRQ2 which is used
as cascade IRQ on legacy platforms. It seems we have to check
if we have enough legacy IRQs reserved before we can call
setup_irq().
The fix adds such check in native_init_IRQ() and in setup_default_timer_irq().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Link: http://lkml.kernel.org/r/1405931920-12871-1-git-send-email-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Swap it for the more canonical lockdep_assert_held() which always
does the right thing - Guenter Roeck
* Assign the correct value to efi.runtime_version on arm64 so that all
the runtime services can be invoked - Semen Protsenko
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=IUiu
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent
Pull EFI fixes from Matt Fleming:
* WARN_ON(!spin_is_locked()) always triggers on non-SMP machines.
Swap it for the more canonical lockdep_assert_held() which always
does the right thing - Guenter Roeck
* Assign the correct value to efi.runtime_version on arm64 so that all
the runtime services can be invoked - Semen Protsenko
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the file x2apic_uv_x.c, some code is compiled conditionally
depending on CONFIG_SMP. However, the file is only built, if
CONFIG_X86_UV is enabled.
CONFIG_X86_UV depends on CONFIG_NUMA, which itself depends on
CONFIG_SMP, so the #ifdef will always evaluate to true, if the
file is compiled. Thus, it is unnecessary and can be removed.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Hedi Berriche <hedi@sgi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Travis <travis@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Link: http://lkml.kernel.org/r/1408522561-23389-1-git-send-email-rupran@einserver.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The table mapping CPUID bits to human-readable strings takes up a
non-trivial amount of space, and only exists to support /proc/cpuinfo
and a couple of kernel messages. Since programs depend on the format of
/proc/cpuinfo, force inclusion of the table when building with /proc
support; otherwise, support omitting that table to save space, in which
case the kernel messages will print features numerically instead.
In addition to saving 1408 bytes out of vmlinux, this also saves 1373
bytes out of the uncompressed setup code, which contributes directly to
the size of bzImage.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
arch/x86/kernel/cpu/proc.c only exists to support files in /proc; omit that
file when compiling without CONFIG_PROC_FS.
Saves 645 additional bytes on 32-bit x86 when !CONFIG_PROC_FS:
add/remove: 0/5 grow/shrink: 0/0 up/down: 0/-645 (-645)
function old new delta
c_stop 1 - -1
c_next 11 - -11
cpuinfo_op 16 - -16
c_start 24 - -24
show_cpuinfo 593 - -593
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
commit 554086d85e "x86_32, entry: Do syscall exit work on badsys
(CVE-2014-4508)" introduced a new jump label (sysenter_badsys) but
somehow the END statements seem to have gone wrong (at least it
feels that way to me).
This does not seem to be a fatal problem, but just for the sake
of symmetry, change the second syscall_badsys to sysenter_badsys.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Link: http://lkml.kernel.org/r/1408093066-31021-1-git-send-email-stefan.bader@canonical.com
Acked-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Miscellaneous
- Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jJGu
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas:
"Part two of the PCI changes for v3.17:
- Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine)
It's a mechanical change that removes uses of the
DEFINE_PCI_DEVICE_TABLE macro. I waited until later in the merge
window to reduce conflicts, but it's possible you'll still see a few"
* tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
Pull x86/apic updates from Thomas Gleixner:
"This is a major overhaul to the x86 apic subsystem consisting of the
following parts:
- Remove obsolete APIC driver abstractions (David Rientjes)
- Use the irqdomain facilities to dynamically allocate IRQs for
IOAPICs. This is a prerequisite to enable IOAPIC hotplug support,
and it also frees up wasted vectors (Jiang Liu)
- Misc fixlets.
Despite the hickup in Ingos previous pull request - caused by the
missing fixup for the suspend/resume issue reported by Borislav - I
strongly recommend that this update finds its way into 3.17. Some
history for you:
This is preparatory work for physical IOAPIC hotplug. The first
attempt to support this was done by Yinghai and I shot it down because
it just added another layer of obscurity and complexity to the already
existing mess without tackling the underlying shortcomings of the
current implementation.
After quite some on- and offlist discussions, I requested that the
design of this functionality must use generic infrastructure, i.e.
irq domains, which provide all the mechanisms to dynamically map linux
interrupt numbers to physical interrupts.
Jiang picked up the idea and did a great job of consolidating the
existing interfaces to manage the x86 (IOAPIC) interrupt system by
utilizing irq domains.
The testing in tip, Linux-next and inside of Intel on various machines
did not unearth any oddities until Borislav exposed it to one of his
oddball machines. The issue was resolved quickly, but unfortunately
the fix fell through the cracks and did not hit the tip tree before
Ingo sent the pull request. Not entirely Ingos fault, I also assumed
that the fix was already merged when Ingo asked me whether he could
send it.
Nevertheless this work has a proper design, has undergone several
rounds of review and the final fallout after applying it to tip and
integrating it into Linux-next has been more than moderate. It's the
ground work not only for IOAPIC hotplug, it will also allow us to move
the lowlevel vector allocation into the irqdomain hierarchy, which
will benefit other architectures as well. Patches are posted already,
but they are on hold for two weeks, see below.
I really appreciate the competence and responsiveness Jiang has shown
in course of this endavour. So I'm sure that any fallout of this will
be addressed in a timely manner.
FYI, I'm vanishing for 2 weeks into my annual kids summer camp kitchen
duty^Wvacation, while you folks are drooling at KS/LinuxCon :) But HPA
will have a look at the hopefully zero fallout until I'm back"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation
x86/apic/vsmp: Make is_vsmp_box() static
x86, apic: Remove enable_apic_mode callback
x86, apic: Remove setup_portio_remap callback
x86, apic: Remove multi_timer_check callback
x86, apic: Replace noop_check_apicid_used
x86, apic: Remove check_apicid_present callback
x86, apic: Remove mps_oem_check callback
x86, apic: Remove smp_callin_clear_local_apic callback
x86, apic: Replace trampoline physical addresses with defaults
x86, apic: Remove x86_32_numa_cpu_node callback
x86: intel-mid: Use the new io_apic interfaces
x86, vsmp: Remove is_vsmp_box() from apic_is_clustered_box()
x86, irq: Clean up irqdomain transition code
x86, irq, devicetree: Release IOAPIC pin when PCI device is disabled
x86, irq, SFI: Release IOAPIC pin when PCI device is disabled
x86, irq, mpparse: Release IOAPIC pin when PCI device is disabled
x86, irq, ACPI: Release IOAPIC pin when PCI device is disabled
x86, irq: Introduce helper functions to release IOAPIC pin
x86, irq: Simplify the way to handle ISA IRQ
...
Pull x86/xsave changes from Peter Anvin:
"This is a patchset to support the XSAVES instruction required to
support context switch of supervisor-only features in upcoming
silicon.
This patchset missed the 3.16 merge window, which is why it is based
on 3.15-rc7"
* 'x86-xsave-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, xsave: Add forgotten inline annotation
x86/xsaves: Clean up code in xstate offsets computation in xsave area
x86/xsave: Make it clear that the XSAVE macros use (%edi)/(%rdi)
Define kernel API to get address of each state in xsave area
x86/xsaves: Enable xsaves/xrstors
x86/xsaves: Call booting time xsaves and xrstors in setup_init_fpu_buf
x86/xsaves: Save xstate to task's xsave area in __save_fpu during booting time
x86/xsaves: Add xsaves and xrstors support for booting time
x86/xsaves: Clear reserved bits in xsave header
x86/xsaves: Use xsave/xrstor for saving and restoring user space context
x86/xsaves: Use xsaves/xrstors for context switch
x86/xsaves: Use xsaves/xrstors to save and restore xsave area
x86/xsaves: Define a macro for handling xsave/xrstor instruction fault
x86/xsaves: Define macros for xsave instructions
x86/xsaves: Change compacted format xsave area header
x86/alternative: Add alternative_input_2 to support alternative with two features and input
x86/xsaves: Add a kernel parameter noxsaves to disable xsaves/xrstors
Keeping track of all the various CPU names is hard enough; adding extra
silly names for no reason is just not helping. If we know the base arch
name (IvyBridge) then we can do the client/server parts with the well
known {,EP,EX} postfixes, no need to remember endless amounts of
unrelated and pointless names for this.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-8559jke61dsyr7d0i74iutli@git.kernel.org
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch exposes two basic events for Ivytown IMC uncore PMU:
- cas_count_read: number of full-cache line reads to memory controller
- cas_count_write: number of full-cache line writes to memory controller
Those events use the same encoding as for SNB-EP, so reuse the same
event table. See specification in:
http://www.intel.com/content/dam/www/public/us/en/documents/manuals/xeon-e5-2600-v2-uncore-manual.pdf
By aggregating all the read and write events from all the memory controllers
of each processor socket, one can determine the total memory bandwidth utilization.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140812060031.GA25239@quad
Cc: zheng.z.yan@intel.com
Cc: ak@linux.intel.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch makes the code more readable. It also renames
precise_store_data_hsw() to precise_datala_hsw() because
the function is called for both loads and stores on HSW.
The patch also gets rid of the hardcoded store events
codes in that same function.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1407785233-32193-5-git-send-email-eranian@google.com
Cc: ak@linux.intel.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch fixes issues introuduce by Andi's previous patch 'Revamp PEBS'
series.
This patch fixes the following:
- precise_store_data_hsw() encode the mem op type whenever we can
- precise_store_data_hsw set the default data source correctly
- 0 is not a valid init value for data source. Define PERF_MEM_NA as the
default value
This bug was actually introduced by
commit 722e76e60f
Author: Stephane Eranian <eranian@google.com>
Date: Thu May 15 17:56:44 2014 +0200
fix Haswell precise store data source encoding
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1407785233-32193-4-git-send-email-eranian@google.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: ak@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Haswell supports reporting the data address for a range
of PEBS events, including:
UOPS_RETIRED.ALL
MEM_UOPS_RETIRED.STLB_MISS_LOADS
MEM_UOPS_RETIRED.STLB_MISS_STORES
MEM_UOPS_RETIRED.LOCK_LOADS
MEM_UOPS_RETIRED.SPLIT_LOADS
MEM_UOPS_RETIRED.SPLIT_STORES
MEM_UOPS_RETIRED.ALL_LOADS
MEM_UOPS_RETIRED.ALL_STORES
MEM_LOAD_UOPS_RETIRED.L1_HIT
MEM_LOAD_UOPS_RETIRED.L2_HIT
MEM_LOAD_UOPS_RETIRED.L3_HIT
MEM_LOAD_UOPS_RETIRED.L1_MISS
MEM_LOAD_UOPS_RETIRED.L2_MISS
MEM_LOAD_UOPS_RETIRED.L3_MISS
MEM_LOAD_UOPS_RETIRED.HIT_LFB
MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_MISS
MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HIT
MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HITM
MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_NONE
MEM_LOAD_UOPS_L3_MISS_RETIRED.LOCAL_DRAM
This facility was already enabled earlier with the original Haswell
perf changes.
However these addresses were always reports as stores by perf, which is wrong,
as they could be loads too. The hardware does not distinguish loads and stores
for these instructions, so there's no (cheap) way for the profiler
to find out.
Change the type to PERF_MEM_OP_NA instead.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: http://lkml.kernel.org/r/1407785233-32193-3-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The basic idea is that it does not make sense to list all PEBS
events individually. The list is very long, sometimes outdated
and the hardware doesn't need it. If an event does not support
PEBS it will just not count, there is no security issue.
We need to only list events that something special, like
supporting load or store addresses.
This vastly simplifies the PEBS event selection. It also
speeds up the scheduling because the scheduler doesn't
have to walk as many constraints.
Bugs fixed:
- We do not allow setting forbidden flags with PEBS anymore
(SDM 18.9.4), except for the special cycle event.
This is done using a new constraint macro that also
matches on the event flags.
- Correct DataLA and load/store/na flags reporting on Haswell
[Requires a followon patch]
- We did not allow all PEBS events on Haswell:
We were missing some valid subevents in d1-d2 (MEM_LOAD_UOPS_RETIRED.*,
MEM_LOAD_UOPS_RETIRED_L3_HIT_RETIRED.*)
This includes the changes proposed by Stephane earlier and obsoletes
his patchkit (except for some changes on pre Sandy Bridge/Silvermont
CPUs)
I only did Sandy Bridge and Silvermont and later so far, mostly because these
are the parts I could directly confirm the hardware behavior with hardware
architects. Also I do not believe the older CPUs have any
missing events in their PEBS list, so there's no pressing
need to change them.
I did not implement the flag proposed by Peter to allow
setting forbidden flags. If really needed this could
be implemented on to of this patch.
v2: Fix broken store events on SNB/IVB (Stephane Eranian)
v3: More fixes. Rename some arguments (Stephane Eranian)
v4: List most Haswell events individually again to report
memory operation type correctly.
Add new flags to describe load/store/na for datala.
Update description.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1407785233-32193-2-git-send-email-eranian@google.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Cc: Mark Davies <junk@eslaf.co.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This fixes a side effect of Kan's earlier patch to probe the LBRs at boot
time. Normally when the LBRs are disabled cycles:pp is disabled too.
So for example cycles:pp doesn't work.
However this is not needed with PEBSv2 and later (Haswell) because
it does not need LBRs to correct the IP-off-by-one.
So add an extra check for PEBSv2 that also allows :pp
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: kan.liang@intel.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: http://lkml.kernel.org/r/1407456534-15747-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
HSW-EP has a larger offcore mask than the client Haswell CPUs.
It is the same mask as on Sandy/IvyBridge-EP. All of
Haswell was using the client mask, so some bits were missing.
On the client parts some bits were also missing compared
to Sandy/IvyBridge, in particular the bits to match on a L4
cache hit.
The Haswell core in both client and server incarnations
accepts the same bits (but some are nops), so we can use
the same mask.
So use the snbep extended mask, which is a superset of the
client and the server, for all of Haswell.
This allows specifying a number of extra offcore events, like
for example for HSW-EP.
% perf stat -e cpu/event=0xb7,umask=0x1,offcore_rsp=0x3fffc00100,name=offcore_response_pf_l3_rfo_l3_miss_any_response/ true
which were <not supported> before.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: eranian@google.com
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: http://lkml.kernel.org/r/1406840722-25416-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The model number descriptions got a bit messy, clean them up.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-oo3xclxdoy8s7ubssn929vaj@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to
meet kernel coding style guidelines. This issue was reported by checkpatch.
A simplified version of the semantic patch that makes this change is as
follows (http://coccinelle.lip6.fr/):
// <smpl>
@@
identifier i;
declarer name DEFINE_PCI_DEVICE_TABLE;
initializer z;
@@
- DEFINE_PCI_DEVICE_TABLE(i)
+ const struct pci_device_id i[]
= z;
// </smpl>
[bhelgaas: add semantic patch]
Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This is the final piece of the puzzle of verifying kernel image signature
during kexec_file_load() syscall.
This patch calls into PE file routines to verify signature of bzImage. If
signature are valid, kexec_file_load() succeeds otherwise it fails.
Two new config options have been introduced. First one is
CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be
validly signed otherwise kernel load will fail. If this option is not
set, no signature verification will be done. Only exception will be when
secureboot is enabled. In that case signature verification should be
automatically enforced when secureboot is enabled. But that will happen
when secureboot patches are merged.
Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option
enables signature verification support on bzImage. If this option is not
set and previous one is set, kernel image loading will fail because kernel
does not have support to verify signature of bzImage.
I tested these patches with both "pesign" and "sbsign" signed bzImages.
I used signing_key.priv key and signing_key.x509 cert for signing as
generated during kernel build process (if module signing is enabled).
Used following method to sign bzImage.
pesign
======
- Convert DER format cert to PEM format cert
openssl x509 -in signing_key.x509 -inform DER -out signing_key.x509.PEM -outform
PEM
- Generate a .p12 file from existing cert and private key file
openssl pkcs12 -export -out kernel-key.p12 -inkey signing_key.priv -in
signing_key.x509.PEM
- Import .p12 file into pesign db
pk12util -i /tmp/kernel-key.p12 -d /etc/pki/pesign
- Sign bzImage
pesign -i /boot/vmlinuz-3.16.0-rc3+ -o /boot/vmlinuz-3.16.0-rc3+.signed.pesign
-c "Glacier signing key - Magrathea" -s
sbsign
======
sbsign --key signing_key.priv --cert signing_key.x509.PEM --output
/boot/vmlinuz-3.16.0-rc3+.signed.sbsign /boot/vmlinuz-3.16.0-rc3+
Patch details:
Well all the hard work is done in previous patches. Now bzImage loader
has just call into that code and verify whether bzImage signature are
valid or not.
Also create two config options. First one is CONFIG_KEXEC_VERIFY_SIG.
This option enforces that kernel has to be validly signed otherwise kernel
load will fail. If this option is not set, no signature verification will
be done. Only exception will be when secureboot is enabled. In that case
signature verification should be automatically enforced when secureboot is
enabled. But that will happen when secureboot patches are merged.
Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option
enables signature verification support on bzImage. If this option is not
set and previous one is set, kernel image loading will fail because kernel
does not have support to verify signature of bzImage.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch does two things. It passes EFI run time mappings to second
kernel in bootparams efi_info. Second kernel parse this info and create
new mappings in second kernel. That means mappings in first and second
kernel will be same. This paves the way to enable EFI in kexec kernel.
This patch also prepares and passes EFI setup data through bootparams.
This contains bunch of information about various tables and their
addresses.
These information gathering and passing has been written along the lines
of what current kexec-tools is doing to make kexec work with UEFI.
[akpm@linux-foundation.org: s/get_efi/efi_get/g, per Matt]
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds support for loading a kexec on panic (kdump) kernel usning
new system call.
It prepares ELF headers for memory areas to be dumped and for saved cpu
registers. Also prepares the memory map for second kernel and limits its
boot to reserved areas only.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is loader specific code which can load bzImage and set it up for
64bit entry. This does not take care of 32bit entry or real mode entry.
32bit mode entry can be implemented if somebody needs it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Load purgatory code in RAM and relocate it based on the location.
Relocation code has been inspired by module relocation code and purgatory
relocation code in kexec-tools.
Also compute the checksums of loaded kexec segments and store them in
purgatory.
Arch independent code provides this functionality so that arch dependent
bootloaders can make use of it.
Helper functions are provided to get/set symbol values in purgatory which
are used by bootloaders later to set things like stack and entry point of
second kernel etc.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previous patch provided the interface definition and this patch prvides
implementation of new syscall.
Previously segment list was prepared in user space. Now user space just
passes kernel fd, initrd fd and command line and kernel will create a
segment list internally.
This patch contains generic part of the code. Actual segment preparation
and loading is done by arch and image specific loader. Which comes in
next patch.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull timer and time updates from Thomas Gleixner:
"A rather large update of timers, timekeeping & co
- Core timekeeping code is year-2038 safe now for 32bit machines.
Now we just need to fix all in kernel users and the gazillion of
user space interfaces which rely on timespec/timeval :)
- Better cache layout for the timekeeping internal data structures.
- Proper nanosecond based interfaces for in kernel users.
- Tree wide cleanup of code which wants nanoseconds but does hoops
and loops to convert back and forth from timespecs. Some of it
definitely belongs into the ugly code museum.
- Consolidation of the timekeeping interface zoo.
- A fast NMI safe accessor to clock monotonic for tracing. This is a
long standing request to support correlated user/kernel space
traces. With proper NTP frequency correction it's also suitable
for correlation of traces accross separate machines.
- Checkpoint/restart support for timerfd.
- A few NOHZ[_FULL] improvements in the [hr]timer code.
- Code move from kernel to kernel/time of all time* related code.
- New clocksource/event drivers from the ARM universe. I'm really
impressed that despite an architected timer in the newer chips SoC
manufacturers insist on inventing new and differently broken SoC
specific timers.
[ Ed. "Impressed"? I don't think that word means what you think it means ]
- Another round of code move from arch to drivers. Looks like most
of the legacy mess in ARM regarding timers is sorted out except for
a few obnoxious strongholds.
- The usual updates and fixlets all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
timekeeping: Fixup typo in update_vsyscall_old definition
clocksource: document some basic timekeeping concepts
timekeeping: Use cached ntp_tick_length when accumulating error
timekeeping: Rework frequency adjustments to work better w/ nohz
timekeeping: Minor fixup for timespec64->timespec assignment
ftrace: Provide trace clocks monotonic
timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC
seqcount: Add raw_write_seqcount_latch()
seqcount: Provide raw_read_seqcount()
timekeeping: Use tk_read_base as argument for timekeeping_get_ns()
timekeeping: Create struct tk_read_base and use it in struct timekeeper
timekeeping: Restructure the timekeeper some more
clocksource: Get rid of cycle_last
clocksource: Move cycle_last validation to core code
clocksource: Make delta calculation a function
wireless: ath9k: Get rid of timespec conversions
drm: vmwgfx: Use nsec based interfaces
drm: i915: Use nsec based interfaces
timekeeping: Provide ktime_get_raw()
hangcheck-timer: Use ktime_get_ns()
...
Commit ea431643d6 ("x86/mce: Fix CMCI preemption bugs") breaks RT by
the completely unrelated conversion of the cmci_discover_lock to a
regular (non raw) spinlock. This lock was annotated in commit
59d958d2c7 ("locking, x86: mce: Annotate cmci_discover_lock as raw")
with a proper explanation why.
The argument for converting the lock back to a regular spinlock was:
- it does percpu ops without disabling preemption. Preemption is not
disabled due to the mistaken use of a raw spinlock.
Which is complete nonsense. The raw_spinlock is disabling preemption in
the same way as a regular spinlock. In mainline spinlock maps to
raw_spinlock, in RT spinlock becomes a "sleeping" lock.
raw_spinlock has on RT exactly the same semantics as in mainline. And
because this lock is taken in non preemptible context it must be raw on
RT.
Undo the locking brainfart.
Reported-by: Clark Williams <williams@redhat.com>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 vdso updates from Ingo Molnar:
"Further simplifications and improvements to the VDSO code, by Andy
Lutomirski"
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86_64/vsyscall: Fix warn_bad_vsyscall log output
x86/vdso: Set VM_MAYREAD for the vvar vma
x86, vdso: Get rid of the fake section mechanism
x86, vdso: Move the vvar area before the vdso text
Pull RAS updates from Ingo Molnar:
"The main changes in this cycle are:
- RAS tracing/events infrastructure, by Gong Chen.
- Various generalizations of the APEI code to make it available to
non-x86 architectures, by Tomasz Nowicki"
* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ras: Fix build warnings in <linux/aer.h>
acpi, apei, ghes: Factor out ioremap virtual memory for IRQ and NMI context.
acpi, apei, ghes: Make NMI error notification to be GHES architecture extension.
apei, mce: Factor out APEI architecture specific MCE calls.
RAS, extlog: Adjust init flow
trace, eMCA: Add a knob to adjust where to save event log
trace, RAS: Add eMCA trace event interface
RAS, debugfs: Add debugfs interface for RAS subsystem
CPER: Adjust code flow of some functions
x86, MCE: Robustify mcheck_init_device
trace, AER: Move trace into unified interface
trace, RAS: Add basic RAS trace event
x86, MCE: Kill CPU_POST_DEAD
Pull x86 platform updates from Ingo Molnar:
"The main changes in this cycle are:
- Intel SOC driver updates, by Aubrey Li.
- TS5500 platform updates, by Vivien Didelot"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pmc_atom: Silence shift wrapping warnings in pmc_sleep_tmr_show()
x86/pmc_atom: Expose PMC device state and platform sleep state
x86/pmc_atom: Eisable a few S0ix wake up events for S0ix residency
x86/platform: New Intel Atom SOC power management controller driver
x86/platform/ts5500: Add support for TS-5400 boards
x86/platform/ts5500: Add a 'name' sysfs attribute
x86/platform/ts5500: Use the DEVICE_ATTR_RO() macro
Pull x86 mm changes from Ingo Molnar:
"The main change in this cycle is the rework of the TLB range flushing
code, to simplify, fix and consolidate the code. By Dave Hansen"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Set TLB flush tunable to sane value (33)
x86/mm: New tunable for single vs full TLB flush
x86/mm: Add tracepoints for TLB flushes
x86/mm: Unify remote INVLPG code
x86/mm: Fix missed global TLB flush stat
x86/mm: Rip out complicated, out-of-date, buggy TLB flushing
x86/mm: Clean up the TLB flushing code
x86/smep: Be more informative when signalling an SMEP fault
Pull EFI changes from Ingo Molnar:
"Main changes in this cycle are:
- arm64 efi stub fixes, preservation of FP/SIMD registers across
firmware calls, and conversion of the EFI stub code into a static
library - Ard Biesheuvel
- Xen EFI support - Daniel Kiper
- Support for autoloading the efivars driver - Lee, Chun-Yi
- Use the PE/COFF headers in the x86 EFI boot stub to request that
the stub be loaded with CONFIG_PHYSICAL_ALIGN alignment - Michael
Brown
- Consolidate all the x86 EFI quirks into one file - Saurabh Tangri
- Additional error logging in x86 EFI boot stub - Ulf Winkelvos
- Support loading initrd above 4G in EFI boot stub - Yinghai Lu
- EFI reboot patches for ACPI hardware reduced platforms"
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
efi/arm64: Handle missing virtual mapping for UEFI System Table
arch/x86/xen: Silence compiler warnings
xen: Silence compiler warnings
x86/efi: Request desired alignment via the PE/COFF headers
x86/efi: Add better error logging to EFI boot stub
efi: Autoload efivars
efi: Update stale locking comment for struct efivars
arch/x86: Remove efi_set_rtc_mmss()
arch/x86: Replace plain strings with constants
xen: Put EFI machinery in place
xen: Define EFI related stuff
arch/x86: Remove redundant set_bit(EFI_MEMMAP) call
arch/x86: Remove redundant set_bit(EFI_SYSTEM_TABLES) call
efi: Introduce EFI_PARAVIRT flag
arch/x86: Do not access EFI memory map if it is not available
efi: Use early_mem*() instead of early_io*()
arch/ia64: Define early_memunmap()
x86/reboot: Add EFI reboot quirk for ACPI Hardware Reduced flag
efi/reboot: Allow powering off machines using EFI
efi/reboot: Add generic wrapper around EfiResetSystem()
...
Pull x86 cpufeature updates from Ingo Molnar:
"The main changes in this cycle were:
- Continued cleanups of CPU bugs mis-marked as 'missing features', by
Borislav Petkov.
- Detect the xsaves/xrstors feature and releated cleanup, by Fenghua
Yu"
* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, cpu: Kill cpu_has_mp
x86, amd: Cleanup init_amd
x86/cpufeature: Add bug flags to /proc/cpuinfo
x86, cpufeature: Convert more "features" to bugs
x86/xsaves: Detect xsaves/xrstors feature
x86/cpufeature.h: Reformat x86 feature macros
Pull x86 build/cleanup/debug updates from Ingo Molnar:
"Robustify the build process with a quirk to avoid GCC reordering
related bugs.
Two code cleanups.
Simplify entry_64.S CFI annotations, by Jan Beulich"
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, build: Change code16gcc.h from a C header to an assembly header
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Simplify __HAVE_ARCH_CMPXCHG tests
x86/tsc: Get rid of custom DIV_ROUND() macro
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/debug: Drop several unnecessary CFI annotations
Pull perf changes from Ingo Molnar:
"Kernel side changes:
- Consolidate the PMU interrupt-disabled code amongst architectures
(Vince Weaver)
- misc fixes
Tooling changes (new features, user visible changes):
- Add support for pagefault tracing in 'trace', please see multiple
examples in the changeset messages (Stanislav Fomichev).
- Add pagefault statistics in 'trace' (Stanislav Fomichev)
- Add header for columns in 'top' and 'report' TUI browsers (Jiri
Olsa)
- Add pagefault statistics in 'trace' (Stanislav Fomichev)
- Add IO mode into timechart command (Stanislav Fomichev)
- Fallback to syscalls:* when raw_syscalls:* is not available in the
perl and python perf scripts. (Daniel Bristot de Oliveira)
- Add --repeat global option to 'perf bench' to be used in benchmarks
such as the existing 'futex' one, that was modified to use it
instead of a local option. (Davidlohr Bueso)
- Fix fd -> pathname resolution in 'trace', be it using /proc or a
vfs_getname probe point. (Arnaldo Carvalho de Melo)
- Add suggestion of how to set perf_event_paranoid sysctl, to help
non-root users trying tools like 'trace' to get a working
environment. (Arnaldo Carvalho de Melo)
- Updates from trace-cmd for traceevent plugin_kvm plus args cleanup
(Steven Rostedt, Jan Kiszka)
- Support S/390 in 'perf kvm stat' (Alexander Yarygin)
Tooling infrastructure changes:
- Allow reserving a row for header purposes in the hists browser
(Arnaldo Carvalho de Melo)
- Various fixes and prep work related to supporting Intel PT (Adrian
Hunter)
- Introduce multiple debug variables control (Jiri Olsa)
- Add callchain and additional sample information for python scripts
(Joseph Schuchart)
- More prep work to support Intel PT: (Adrian Hunter)
- Polishing 'script' BTS output
- 'inject' can specify --kallsym
- VDSO is per machine, not a global var
- Expose data addr lookup functions previously private to 'script'
- Large mmap fixes in events processing
- Include standard stringify macros in power pc code (Sukadev
Bhattiprolu)
Tooling cleanups:
- Convert open coded equivalents to asprintf() (Andy Shevchenko)
- Remove needless reassignments in 'trace' (Arnaldo Carvalho de Melo)
- Cache the is_exit syscall test in 'trace) (Arnaldo Carvalho de
Melo)
- No need to reimplement err() in 'perf bench sched-messaging', drop
barf(). (Davidlohr Bueso).
- Remove ev_name argument from perf_evsel__hists_browse, can be
obtained from the other parameters. (Jiri Olsa)
Tooling fixes:
- Fix memory leak in the 'sched-messaging' perf bench test.
(Davidlohr Bueso)
- The -o and -n 'perf bench mem' options are mutually exclusive, emit
error when both are specified. (Davidlohr Bueso)
- Fix scrollbar refresh row index in the ui browser, problem exposed
now that headers will be added and will be allowed to be switched
on/off. (Jiri Olsa)
- Handle the num array type in python properly (Sebastian Andrzej
Siewior)
- Fix wrong condition for allocation failure (Jiri Olsa)
- Adjust callchain based on DWARF debug info on powerpc (Sukadev
Bhattiprolu)
- Fix a risk for doing free on uninitialized pointer in traceevent
lib (Rickard Strandqvist)
- Update attr test with PERF_FLAG_FD_CLOEXEC flag (Jiri Olsa)
- Enable close-on-exec flag on perf file descriptor (Yann Droneaud)
- Fix build on gcc 4.4.7 (Arnaldo Carvalho de Melo)
- Event ordering fixes (Jiri Olsa)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (123 commits)
Revert "perf tools: Fix jump label always changing during tracing"
perf tools: Fix perf usage string leftover
perf: Check permission only for parent tracepoint event
perf record: Store PERF_RECORD_FINISHED_ROUND only for nonempty rounds
perf record: Always force PERF_RECORD_FINISHED_ROUND event
perf inject: Add --kallsyms parameter
perf tools: Expose 'addr' functions so they can be reused
perf session: Fix accounting of ordered samples queue
perf powerpc: Include util/util.h and remove stringify macros
perf tools: Fix build on gcc 4.4.7
perf tools: Add thread parameter to vdso__dso_findnew()
perf tools: Add dso__type()
perf tools: Separate the VDSO map name from the VDSO dso name
perf tools: Add vdso__new()
perf machine: Fix the lifetime of the VDSO temporary file
perf tools: Group VDSO global variables into a structure
perf session: Add ability to skip 4GiB or more
perf session: Add ability to 'skip' a non-piped event stream
perf tools: Pass machine to vdso__dso_findnew()
perf tools: Add dso__data_size()
...
to the ftrace function callback infrastructure. It's introducing a
way to allow different functions to call directly different trampolines
instead of all calling the same "mcount" one.
The only user of this for now is the function graph tracer, which always
had a different trampoline, but the function tracer trampoline was called
and did basically nothing, and then the function graph tracer trampoline
was called. The difference now, is that the function graph tracer
trampoline can be called directly if a function is only being traced by
the function graph trampoline. If function tracing is also happening on
the same function, the old way is still done.
The accounting for this takes up more memory when function graph tracing
is activated, as it needs to keep track of which functions it uses.
I have a new way that wont take as much memory, but it's not ready yet
for this merge window, and will have to wait for the next one.
Another big change was the removal of the ftrace_start/stop() calls that
were used by the suspend/resume code that stopped function tracing when
entering into suspend and resume paths. The stop of ftrace was done
because there was some function that would crash the system if one called
smp_processor_id()! The stop/start was a big hammer to solve the issue
at the time, which was when ftrace was first introduced into Linux.
Now ftrace has better infrastructure to debug such issues, and I found
the problem function and labeled it with "notrace" and function tracing
can now safely be activated all the way down into the guts of suspend
and resume.
Other changes include clean ups of uprobe code.
Clean up of the trace_seq() code.
And other various small fixes and clean ups to ftrace and tracing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT35zXAAoJEKQekfcNnQGuOz0H/38zqM0nLFhrgvz3EPk2UOjn
xqpX8qyb2V7TJZL+IqeXU2a5cQZl5ba0D4WtBGpxbTae3CJYiuQ87iKUNFoH0om5
FDpn80igb368k8V3qRdRsziKVCCf0XBd/NkHJXc0ZkfXGyzB2Ga4bBxALxp2gj9y
bnO+vKo6+tWYKG4hyQb4P3LRXUrK8/LWEsPr39cH2QH1Rdj69Lx9CgrCdUVJmwcb
Bj8hEiLXL/RYCFNn79A3wNTUvW0rG/AOIf4SLqXtasSRZ0ToaU0ZyDnrNv+0Ol47
rX8tSk+LfXchL9hpIvjCf1vlAYq3pO02favteR/jip3lx/dTjEDE4RJ9qtJzZ4Q=
=fwQY
-----END PGP SIGNATURE-----
Merge tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This pull request has a lot of work done. The main thing is the
changes to the ftrace function callback infrastructure. It's
introducing a way to allow different functions to call directly
different trampolines instead of all calling the same "mcount" one.
The only user of this for now is the function graph tracer, which
always had a different trampoline, but the function tracer trampoline
was called and did basically nothing, and then the function graph
tracer trampoline was called. The difference now, is that the
function graph tracer trampoline can be called directly if a function
is only being traced by the function graph trampoline. If function
tracing is also happening on the same function, the old way is still
done.
The accounting for this takes up more memory when function graph
tracing is activated, as it needs to keep track of which functions it
uses. I have a new way that wont take as much memory, but it's not
ready yet for this merge window, and will have to wait for the next
one.
Another big change was the removal of the ftrace_start/stop() calls
that were used by the suspend/resume code that stopped function
tracing when entering into suspend and resume paths. The stop of
ftrace was done because there was some function that would crash the
system if one called smp_processor_id()! The stop/start was a big
hammer to solve the issue at the time, which was when ftrace was first
introduced into Linux. Now ftrace has better infrastructure to debug
such issues, and I found the problem function and labeled it with
"notrace" and function tracing can now safely be activated all the way
down into the guts of suspend and resume
Other changes include clean ups of uprobe code, clean up of the
trace_seq() code, and other various small fixes and clean ups to
ftrace and tracing"
* tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
ftrace: Add warning if tramp hash does not match nr_trampolines
ftrace: Fix trampoline hash update check on rec->flags
ring-buffer: Use rb_page_size() instead of open coded head_page size
ftrace: Rename ftrace_ops field from trampolines to nr_trampolines
tracing: Convert local function_graph functions to static
ftrace: Do not copy old hash when resetting
tracing: let user specify tracing_thresh after selecting function_graph
ring-buffer: Always run per-cpu ring buffer resize with schedule_work_on()
tracing: Remove function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST
s390/ftrace: remove check of obsolete variable function_trace_stop
arm64, ftrace: Remove check of obsolete variable function_trace_stop
Blackfin: ftrace: Remove check of obsolete variable function_trace_stop
metag: ftrace: Remove check of obsolete variable function_trace_stop
microblaze: ftrace: Remove check of obsolete variable function_trace_stop
MIPS: ftrace: Remove check of obsolete variable function_trace_stop
parisc: ftrace: Remove check of obsolete variable function_trace_stop
sh: ftrace: Remove check of obsolete variable function_trace_stop
sparc64,ftrace: Remove check of obsolete variable function_trace_stop
tile: ftrace: Remove check of obsolete variable function_trace_stop
ftrace: x86: Remove check of obsolete variable function_trace_stop
...
I don't know if we really need 64 bits here but these variables are
declared as u64 and it can't hurt to cast this so we prevent any shift
wrapping.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Aubrey Li <aubrey.li@linux.intel.com>
Link: http://lkml.kernel.org/r/20140801082715.GE28869@mwanda
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Since checkin
411cf9ee29 x86, vsmp: Remove is_vsmp_box() from apic_is_clustered_box()
... is_vsmp_box() is only used in vsmp_64.c and does not have any
header file declaring it, so make it explicitly static.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Shai Fultheim <shai@scalemp.com>
Cc: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1404036068-11674-1-git-send-email-oren@scalemp.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
I think the flush_tlb_mm_range() code that tries to tune the
flush sizes based on the CPU needs to get ripped out for
several reasons:
1. It is obviously buggy. It uses mm->total_vm to judge the
task's footprint in the TLB. It should certainly be using
some measure of RSS, *NOT* ->total_vm since only resident
memory can populate the TLB.
2. Haswell, and several other CPUs are missing from the
intel_tlb_flushall_shift_set() function. Thus, it has been
demonstrated to bitrot quickly in practice.
3. It is plain wrong in my vm:
[ 0.037444] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.037444] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.037444] tlb_flushall_shift: 6
Which leads to it to never use invlpg.
4. The assumptions about TLB refill costs are wrong:
http://lkml.kernel.org/r/1337782555-8088-3-git-send-email-alex.shi@intel.com
(more on this in later patches)
5. I can not reproduce the original data: https://lkml.org/lkml/2012/5/17/59
I believe the sample times were too short. Running the
benchmark in a loop yields times that vary quite a bit.
Note that this leaves us with a static ceiling of 1 page. This
is a conservative, dumb setting, and will be revised in a later
patch.
This also removes the code which attempts to predict whether we
are flushing data or instructions. We expect instruction flushes
to be relatively rare and not worth tuning for explicitly.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140731154055.ABC88E89@viggo.jf.intel.com
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
