Commit Graph

601 Commits

Author SHA1 Message Date
Michal Kazior
cf44012810 mac80211: fix unnecessary frame drops in mesh fwding
The ieee80211_queue_stopped() expects hw queue
number but it was given raw WMM AC number instead.

This could cause frame drops and problems with
traffic in some cases - most notably if driver
doesn't map AC numbers to queue numbers 1:1 and
uses ieee80211_stop_queues() and
ieee80211_wake_queue() only without ever calling
ieee80211_wake_queues().

On ath10k it was possible to hit this problem in
the following case:

  1. wlan0 uses queue 0
     (ath10k maps queues per vif)
  2. offchannel uses queue 15
  3. queues 1-14 are unused
  4. ieee80211_stop_queues()
  5. ieee80211_wake_queue(q=0)
  6. ieee80211_wake_queue(q=15)
     (other queues are not woken up because both
      driver and mac80211 know other queues are
      unused)
  7. ieee80211_rx_h_mesh_fwding()
  8. ieee80211_select_queue_80211() returns 2
  9. ieee80211_queue_stopped(q=2) returns true
 10. frame is dropped (oops!)

Fixes: d3c1597b8d ("mac80211: fix forwarded mesh frame queue mapping")
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24 09:04:26 +01:00
Grzegorz Bajorski
178830481e mac80211: allow drivers to report (non-)monitor frames
Some drivers offload some frames internally (e.g.
AddBa). Reporting such frames to mac80211 would
only confuse MLME. However it would be useful to
be able to pass such frames to monitor interfaces
for sniffing purposes, e.g. when running AP +
monitor.

To do that allow drivers to tell mac80211 whether
a given frame should be:
 - processed but not delivered to any monitor vif
 - not processed but delievered to monitor vifs
   only

Signed-off-by: Grzegorz Bajorski <grzegorz.bajorski@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24 09:04:19 +01:00
Sara Sharon
f9cfa5f354 mac80211: add flag for duplication check
Add an option for driver to check for packet duplication
by itself.
This is needed for example by the iwlwifi driver which
parallelizes the RX path and does the duplication check
per queue.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14 11:13:11 +01:00
Sara Sharon
23a1f8d44c mac80211: process and save VHT MU-MIMO group frame
The Group ID Management frame is an Action frame of
category VHT. It is transmitted by the AP to assign
or change the user position of a STA for one or more
group IDs.
Process and save the group membership data. Notify
underlying driver of changes.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14 11:13:10 +01:00
David S. Miller
b3e0d3d7ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/geneve.c

Here we had an overlapping change, where in 'net' the extraneous stats
bump was being removed whilst in 'net-next' the final argument to
udp_tunnel6_xmit_skb() was being changed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17 22:08:28 -05:00
Eyal Shapira
cf1e05c636 mac80211: handle width changes from opmode notification IE in beacon
An AP can send an operating channel width change in a beacon
opmode notification IE as long as there's a change in the nss as
well (See 802.11ac-2013 section 10.41).
So don't limit updating to nss only from an opmode notification IE.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-15 13:16:47 +01:00
Johannes Berg
441275e103 mac80211: remove string from unaligned packet warning
This really should never happen except very early in the process
of bringing up a new driver, at which point you'll have to add
more debugging in the driver and this string isn't useful. Remove
it and save some size (when it's even compiled in.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04 14:43:32 +01:00
Johannes Berg
e5a9f8d046 mac80211: move station statistics into sub-structs
Group station statistics by where they're (mostly) updated
(TX, RX and TX-status) and group them into sub-structs of
the struct sta_info.

Also rename the variables since the grouping now makes it
obvious where they belong.

This makes it easier to identify where the statistics are
updated in the code, and thus easier to think about them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-21 10:08:22 +02:00
Johannes Berg
a732fa7001 mac80211: clean up ieee80211_rx_h_check_dup code
Reduce indentation a bit to make the condition more readable.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-14 18:27:07 +02:00
Johannes Berg
40d9a38ad3 mac80211: use DECLARE_EWMA
Instead of using the out-of-line average calculation, use the new
DECLARE_EWMA() macro to declare a signal EWMA, and use that.

This actually *reduces* the code size slightly (on x86-64) while
also reducing the station info size by 80 bytes.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14 17:49:53 +02:00
Bertold Van den Bergh
cc11729893 mac80211: Only accept data frames in OCB mode
Currently OCB mode accepts frames with bssid==broadcast and type!=beacon.
Some non-data frames are sent matching this, for example probe responses.
This results in unnecessary creation of STA entries.

Signed-off-by: Bertold Van den Bergh <bertold.vandenbergh@esat.kuleuven.be>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14 17:49:49 +02:00
Arik Nemtsov
c8ff71e667 mac80211: TDLS: handle chan-switch in RTNL locked work
Move TDLS channel-switch Rx handling into an RTNL locked work. This is
required to add proper regulatory checking to incoming channel-switch
requests.
Queue incoming requests in a dedicated skb queue and handle the request
in a device-specific work to avoid deadlocking on interface removal.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:40:15 +02:00
Johannes Berg
e414eea77d mac80211: remove IEEE80211_RX_FRAGMENTED
There's a long-standing TODO item to use this flag in the cooked
monitor RX, but clearly it was never needed and now this hasn't
been used by userspace for a long time, so no userspace changes
could require it now.

Remove the unused flag.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:04 +02:00
Johannes Berg
77c96404a4 mac80211: remove key TX/RX counter
This counter is inherently racy (since it can be incremented by RX
as well as by concurrent TX) and only available in debugfs. Instead
of fixing it to be per-CPU or similar, remove it for now. If needed
it should be added without races and with proper nl80211, perhaps
even addressing the threshold reporting TODO item that's been there
since the code was originally added.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:01 +02:00
Johannes Berg
0c028b5fd1 mac80211: remove zero-length A-MPDU subframe reporting
As there's no driver using this capability and reporting zero-length
A-MPDU subframes for radiotap monitoring, remove the capability to
free up two RX flags.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:38:00 +02:00
Johannes Berg
af9f9b22be mac80211: don't store napi struct
When introducing multiple RX queues, a single NAPI struct will not
be sufficient. Instead of trying to store multiple, simply change
the API to have the NAPI struct passed to the RX function. This of
course means that drivers using rx_irqsafe() cannot use NAPI, but
that seems a reasonable trade-off, particularly since only two of
all drivers are currently using it at all.

While at it, we can now remove the IEEE80211_RX_REORDER_TIMER flag
again since this code path cannot have a napi struct anyway.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:37:59 +02:00
Johannes Berg
a682849329 mac80211: move ieee80211_get_bssid into RX file
This function is only used in the RX code, so moving it into
that file gives the compiler better optimisation possibilities
and also allows us to remove the check for short frames (which
in the RX path cannot happen, but as a generic utility needed
to be checked.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:37:57 +02:00
Johannes Berg
9ad8b21b74 mac80211: remove short frame test and counter
Short frames less than 16 octets are already blocked in the monitor
code by the should_drop_frame() function, and cannot get into the
regular RX path. Therefore, this check can never trigger and the
counter invariably stays zero. Remove the useless code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:37:55 +02:00
Johannes Berg
cf47161ad2 mac80211: rename 'sta_inf' variable to more common 'sta'
We typically use 'sta' for the station info struct, and if needed
'pubsta' for the public (driver-visible) portion thereof. Do this
in the ieee80211_sta_ps_transition() function.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17 15:37:53 +02:00
Johannes Berg
30686bf7f5 mac80211: convert HW flags to unsigned long bitmap
As we're running out of hardware capability flags pretty quickly,
convert them to use the regular test_bit() style unsigned long
bitmaps.

This introduces a number of helper functions/macros to set and to
test the bits, along with new debugfs code.

The occurrences of an explicit __clear_bit() are intentional, the
drivers were never supposed to change their supported bits on the
fly. We should investigate changing this to be a per-frame flag.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-10 16:05:36 +02:00
David S. Miller
dda922c831 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/phy/amd-xgbe-phy.c
	drivers/net/wireless/iwlwifi/Kconfig
	include/net/mac80211.h

iwlwifi/Kconfig and mac80211.h were both trivial overlapping
changes.

The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and
the bug fix that happened on the 'net' side is already integrated
into the rest of the amd-xgbe driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01 22:51:30 -07:00
Johannes Berg
22d3a3c829 mac80211: don't use napi_gro_receive() outside NAPI context
No matter how the driver manages its NAPI context, there's no way
sending frames to it from a timer can be correct, since it would
corrupt the internal GRO lists.

To avoid that, always use the non-NAPI path when releasing frames
from the timer.

Cc: stable@vger.kernel.org
Reported-by: Jean Trivelly <jean.trivelly@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-19 15:46:21 +02:00
Johannes Berg
c206ca6709 mac80211: move dot11 counters under MAC80211_DEBUG_COUNTERS
Since these counters can only be read through debugfs, there's
very little point in maintaining them all the time. However,
even just making them depend on debugfs is pointless - they're
not normally used. Additionally a number of them aren't even
concurrency safe.

Move them under MAC80211_DEBUG_COUNTERS so they're normally
not even compiled in.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-05 14:21:54 +02:00
Johannes Berg
f1160434c7 mac80211: clean up global debugfs statistics
The debugfs statistics macros are pointlessly verbose, so change
that macro to just have a single argument. While at it, remove
the unused counters and rename rx_expand_skb_head2 to the better
rx_expand_skb_head_defrag.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-05 14:21:54 +02:00
Emmanuel Grumbach
b497de63ad mac80211: notify the driver on reordering buffer timeout
When frames time out in the reordering buffer, it is a
good indication that something went wrong and the driver
may want to know about that to take action or trigger
debug flows.
It is pointless to notify the driver about each frame that
is released. Notify each time the timer fires.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 12:25:01 +02:00
Emmanuel Grumbach
6382246e89 mac80211: notify the driver upon BAR Rx
When we receive a BAR, this typically means that our peer
doesn't hear our Block-Acks or that we can't hear its
frames. Either way, it is a good indication that the link
is in a bad condition. This is why it can serve as a probe
to the driver.
Use the event_callback callback for this.
Since more events with the same data will be added in the
feature, the structure that describes the data attached to
the event is called in a generic name: ieee80211_ba_event.

This also means that from now on, the event_callback can't
sleep.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 12:25:00 +02:00
Johannes Berg
5a490510ba mac80211: use per-CPU TX/RX statistics
This isn't all that relevant for RX right now, but TX can be concurrent
due to multi-queue and the accounting is therefore broken.

Use the standard per-CPU statistics to avoid this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 11:16:11 +02:00
Johannes Berg
6fe3eac793 mac80211: OCB: remove pointless check for broadcast BSSID
The OCB input path already checked that the BSSID is the broadcast
address, so the later check can never fail.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 11:14:14 +02:00
Johannes Berg
a58fbe1a85 mac80211: clean up/rename prepare_for_handlers()
The function really shouldn't be called prepare_for_handlers(),
all it does is check if the frame should be dropped. Rename it
to ieee80211_accept_frame() and clean it up a bit.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 11:14:14 +02:00
Johannes Berg
5c90067c0f mac80211: remove IEEE80211_RX_RA_MATCH
With promisc support gone, only AP and P2P-Device type interfaces
still clear IEEE80211_RX_RA_MATCH. In both cases this isn't really
necessary though, so we can remove that flag and the code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 11:14:13 +02:00
Johannes Berg
df1404650c mac80211: remove support for IFF_PROMISC
This support is essentially useless as typically networks are encrypted,
frames will be filtered by hardware, and rate scaling will be done with
the intended recipient in mind. For real monitoring of the network, the
monitor mode support should be used instead.

Removing it removes a lot of corner cases.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24 11:14:13 +02:00
Johannes Berg
17c18bf880 mac80211: add TX fastpath
In order to speed up mac80211's TX path, add the "fast-xmit" cache
that will cache the data frame 802.11 header and other data to be
able to build the frame more quickly. This cache is rebuilt when
external triggers imply changes, but a lot of the checks done per
packet today are simplified away to the check for the cache.

There's also a more detailed description in the code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-22 10:02:25 +02:00
David S. Miller
4e78eb0dbf There isn't much left, but we have
* new mac80211 internal software queue to allow drivers to have
    shorter hardware queues and pull on-demand
  * use rhashtable for mac80211 station table
  * minstrel rate control debug improvements and some refactoring
  * fix noisy message about TX power reduction
  * fix continuous message printing and activity if CRDA doesn't respond
  * fix VHT-related capabilities with "iw connect" or "iwconfig ..."
  * fix Kconfig for cfg80211 wireless extensions compatibility
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJVJ7CPAAoJEDBSmw7B7bqr8+IQAKCAbUyd6PFRT5tcz9kW5GCW
 /ibb+n1e14yWKgNEe1gddUGKG/L3HGCBXNkCYzR2M8mlL7dLPqspaBcGHS4dx8F4
 D0AuikqvtXIxfAXi0zmU2uo7rH7u2X34R2LtS8AlKByD+jmFvxMiPPvxNFgzJu/7
 63UQm73p2pnu/KdXLW1OQEcpZtZJ9+N/uBiq9zbVdX3A8T84ME0oMyy+EAQqCZdK
 CcsTXHCnAgmmXWJlu1JRdopr1bd38mSGB70eXduFtPqDdmtQRnoaCQ9e+tJDA4j4
 svEw0yDmsc4WG1EKLKKCRd3uFOZsng+lcXrHfpm5wlSPpCOItfQ9BzT3x1u6Y5JU
 Z1WMOMkkEce+95U7/RLoXwC/2RS3XelUXTde4cGIRMvO5drOrU58P0gdn3J+yKbv
 6v+2GGKy/39tdXUOxIl3EZT/huIl+h1UNO8C2hyaEwdXK+X1zl31/u6kk1Ns18Wr
 YPEJixxHx0zR8jaZgDC7OlWLuqn4Ay+Ls9yCyIesdHzKpizJKqn83PntYnpJmxoA
 9hlIyRDWnqH44KxzB85ni1C2Qudec3mcCWIWV7M+UoSC1Cgs/LxDzH7kRejR2ZIl
 vRhg5pqyr53L0h2lq5DO4Cj4UzbXb7YioKJRxjyKloNOlRrCZtK/VEsHbdsKEcIp
 d/wHj1AyFZeQfuhk8Qqr
 =mtuo
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2015-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
There isn't much left, but we have
 * new mac80211 internal software queue to allow drivers to have
   shorter hardware queues and pull on-demand
 * use rhashtable for mac80211 station table
 * minstrel rate control debug improvements and some refactoring
 * fix noisy message about TX power reduction
 * fix continuous message printing and activity if CRDA doesn't respond
 * fix VHT-related capabilities with "iw connect" or "iwconfig ..."
 * fix Kconfig for cfg80211 wireless extensions compatibility
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-12 20:43:46 -04:00
David S. Miller
9f0d34bc34 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/usb/asix_common.c
	drivers/net/usb/sr9800.c
	drivers/net/usb/usbnet.c
	include/linux/usb/usbnet.h
	net/ipv4/tcp_ipv4.c
	net/ipv6/tcp_ipv6.c

The TCP conflicts were overlapping changes.  In 'net' we added a
READ_ONCE() to the socket cached RX route read, whilst in 'net-next'
Eric Dumazet touched the surrounding code dealing with how mini
sockets are handled.

With USB, it's a case of the same bug fix first going into net-next
and then I cherry picked it back into net.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02 16:16:53 -04:00
Felix Fietkau
ba8c3d6f16 mac80211: add an intermediate software queue implementation
This allows drivers to request per-vif and per-sta-tid queues from which
they can pull frames. This makes it easier to keep the hardware queues
short, and to improve fairness between clients and vifs.

The task of scheduling packet transmission is left up to the driver -
queueing is controlled by mac80211. Drivers can only dequeue packets by
calling ieee80211_tx_dequeue. This makes it possible to add active queue
management later without changing drivers using this code.

This can also be used as a starting point to implement A-MSDU
aggregation in a way that does not add artificially induced latency.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
[resolved minor context conflict, minor changes, endian annotations]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 20:44:34 +02:00
Johannes Berg
788211d81b mac80211: fix RX A-MPDU session reorder timer deletion
There's an issue with the way the RX A-MPDU reorder timer is
deleted that can cause a kernel crash like this:

 * tid_rx is removed - call_rcu(ieee80211_free_tid_rx)
 * station is destroyed
 * reorder timer fires before ieee80211_free_tid_rx() runs,
   accessing the station, thus potentially crashing due to
   the use-after-free

The station deletion is protected by synchronize_net(), but
that isn't enough -- ieee80211_free_tid_rx() need not have
run when that returns (it deletes the timer.) We could use
rcu_barrier() instead of synchronize_net(), but that's much
more expensive.

Instead, to fix this, add a field tracking that the session
is being deleted. In this case, the only re-arming of the
timer happens with the reorder spinlock held, so make that
code not rearm it if the session is being deleted and also
delete the timer after setting that field. This ensures the
timer cannot fire after ___ieee80211_stop_rx_ba_session()
returns, which fixes the problem.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 14:35:01 +02:00
Johannes Berg
7bedd0cfad mac80211: use rhashtable for station table
We currently have a hand-rolled table with 256 entries and are
using the last byte of the MAC address as the hash. This hash
is obviously very fast, but collisions are easily created and
we waste a lot of space in the common case of just connecting
as a client to an AP where we just have a single station. The
other common case of an AP is also suboptimal due to the size
of the hash table and the ease of causing collisions.

Convert all of this to use rhashtable with jhash, which gives
us the advantage of a far better hash function (with random
perturbation to avoid hash collision attacks) and of course
that the hash table grows and shrinks dynamically with chain
length, improving both cases above.

Use a specialised hash function (using jhash, but with fixed
length) to achieve better compiler optimisation as suggested
by Sergey Ryazanov.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01 10:06:26 +02:00
David S. Miller
7b6249bba9 Lots of updates for net-next; along with the usual flurry
of small fixes, cleanups and internal features we have:
  * VHT support for TDLS and IBSS (conditional on drivers though)
  * first TX performance improvements (the biggest will come later)
  * many suspend/resume (race) fixes
  * name_assign_type support from Tom Gundersen
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJVGWlNAAoJEDBSmw7B7bqr5s8P/R9+Q6y4Ixice9dDOJYynl/d
 dMEUEfCBWUyDaQD1bNQIED2mc0sM5+Ax8OVIVx9fdrLGPxaISBqDJKE1USoTNZzm
 q+U3dM4Q45SfQSsgaY4FtxTlPWPtUKsNMXY/CxLR+IqVeA3+30rX+hv1f3SAqBj0
 68IwW/uUIHb71IZ+hz2Mwudt4JVW8KRg9VlZ0UY6EEvC4m5QD2YkwQQo/hJ2WF+/
 wAJbku02L/Vy4J7E6hNcKYWXokht4fVYphjl/1ZDd/+8L8SUv9mC88n1Jzxa428p
 1PmbtwzbpOrtTcC2BCPDA04IyfMc7k9DlLKw/h2KLPbHZXheD9eVmo/Am5vz+uH6
 926f+FK339SzoJnZ5wBBDiZ8W8TLYNc8ImxtcxjnrtGfr1CKiuh23P1CWyOlKJCO
 BYFJqkCOqWOHYnN0embaj7JqM/LmQI5ZoBZHZhD2KQXIXpTsjjIMPfJvip5D+tsV
 +iXIlQwdeK6rbjxdonBgn7n57XIeSVMAYeyDCbzIShfibjHbUZPn+RsZCtv8RWv8
 EaZu8PerU5ZDKwdX940+lWrtf/TMDJBYQpAIBRuiZK4DTNWCt3BrDlvb1FXGgA+X
 vQJnr32vjJ/pLDxNLHQlkKWC4I/CYtG47OgcJN9AQXrig1zApd+C29zy3aqch3ea
 wxV9dFfheTqZFjtZfSsH
 =O/cf
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2015-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Lots of updates for net-next; along with the usual flurry
of small fixes, cleanups and internal features we have:
 * VHT support for TDLS and IBSS (conditional on drivers though)
 * first TX performance improvements (the biggest will come later)
 * many suspend/resume (race) fixes
 * name_assign_type support from Tom Gundersen
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 16:39:04 -04:00
Johannes Berg
e8f4fb7c7c mac80211: remove drop_unencrypted code
This mechanism was historic, and only ever used by IBSS, which
also doesn't need to have it as it properly manages station's
802.1X PAE state (or, with WEP, always has a key.)

Remove the mechanism to clean up the code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20 11:37:36 +01:00
Johannes Berg
45ceeee81e mac80211: add comment for rx_path_lock
Add a comment explaining how the RX path lock is used.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:08:20 +01:00
Johannes Berg
4cc0dba95a mac80211: move netdev stats to common function
Move the netdev stats accounting into the common function
ieee80211_deliver_skb() that is called in both places.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16 09:05:27 +01:00
Bob Copeland
d0c22119f5 mac80211: drop unencrypted frames in mesh fwding
The mesh forwarding path was not checking that data
frames were protected when running an encrypted network;
add the necessary check.

Cc: stable@vger.kernel.org
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03 09:27:28 +01:00
David S. Miller
940288b6a5 Last round of updates for net-next:
* revert a patch that caused a regression with mesh userspace (Bob)
  * fix a number of suspend/resume related races
    (from Emmanuel, Luca and myself - we'll look at backporting later)
  * add software implementations for new ciphers (Jouni)
  * add a new ACPI ID for Broadcom's rfkill (Mika)
  * allow using netns FD for wireless (Vadim)
  * some other cleanups (various)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJU0NEaAAoJEDBSmw7B7bqr2DAP/3nbk6WB2Lz4Vwi8fh9C4y6X
 4ZzN2v7NHaimC+Wpxg3wP2wCdX2VG3ZWwF3yLm6qgVHGnE35RFLxURen1eqNeW77
 Yf5gvZ066nCGEQ8l8J6YK9vrLX4qp5c4lyE00bbxpZTA4Qq71SgTg+rmGC1be8uX
 vacfaLwfDWffuOOnjBAPfanj7f4AQaUEY2uN1WkBFC7iEeOtPcWVkHAFVIeGjJfQ
 vfgQJcwOjgWjYbwZdQQi7Aj+k1Yzda4pg1yEWn3CkZ8zyeCYGs1gk2ovoBgPgXBP
 yT9ypIdFsN242VJvy7nkFnCKA8mhKyltMQ1Xjs0Q9lAxWdaq9U+iqt5cUn4jxVIG
 T9Vi3PCbx/nVOqcfR81dBTQ3uDU5AyosPsmh2YTxi5lpRBrsjNY2FtaKE0sm2Om3
 wRiSPOdPrXBeEnU0KssI9e6euXgS4JQV78Naq85OWZDd2yZ1fT5U2fi8y4drRGlz
 rucbbobdVhQch5L4FStPz1uW5pNuJrhekXeZIE8MruTNg2A2oBAK3ApO7hxn68sE
 RnbAnkxVLwgedC9042JF5eiS1PDIU46w4e782j/+XskVKMEakqd23iJycx3tmgHZ
 cxDi/qKZ2RCE74YsT61o/9ErSVPvCfNPL3+CVov918jidQQg2WHfKm/jFlIxHIxk
 4wBP7p2VGlENMgw/R8GJ
 =wOaR
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2015-02-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Last round of updates for net-next:
 * revert a patch that caused a regression with mesh userspace (Bob)
 * fix a number of suspend/resume related races
   (from Emmanuel, Luca and myself - we'll look at backporting later)
 * add software implementations for new ciphers (Jouni)
 * add a new ACPI ID for Broadcom's rfkill (Mika)
 * allow using netns FD for wireless (Vadim)
 * some other cleanups (various)

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04 14:57:45 -08:00
David S. Miller
95f873f2ff Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	arch/arm/boot/dts/imx6sx-sdb.dts
	net/sched/cls_bpf.c

Two simple sets of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27 16:59:56 -08:00
Jouni Malinen
8ade538bf3 mac80111: Add BIP-GMAC-128 and BIP-GMAC-256 ciphers
This allows mac80211 to configure BIP-GMAC-128 and BIP-GMAC-256 to the
driver and also use software-implementation within mac80211 when the
driver does not support this with hardware accelaration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-27 11:10:13 +01:00
Jouni Malinen
56c52da2d5 mac80111: Add BIP-CMAC-256 cipher
This allows mac80211 to configure BIP-CMAC-256 to the driver and also
use software-implementation within mac80211 when the driver does not
support this with hardware accelaration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-27 11:09:13 +01:00
Jouni Malinen
2b2ba0db1c mac80111: Add CCMP-256 cipher
This allows mac80211 to configure CCMP-256 to the driver and also use
software-implementation within mac80211 when the driver does not support
this with hardware accelaration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
[squash ccmp256 -> mic_len argument change]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-27 11:07:35 +01:00
Jouni Malinen
00b9cfa3ff mac80111: Add GCMP and GCMP-256 ciphers
This allows mac80211 to configure GCMP and GCMP-256 to the driver and
also use software-implementation within mac80211 when the driver does
not support this with hardware accelaration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
[remove a spurious newline]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-27 11:06:09 +01:00
Johannes Berg
3d6dc3431e mac80211: fix per-TID RX-MSDU counter
In the case of non-QoS association, the counter was actually
wrong. The right index isn't security_idx but seqno_idx, as
security_idx will be 0 for data frames, while 16 is needed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-23 13:26:25 +01:00
Mathy Vanhoef
3a5c5e81d8 mac80211: properly set CCK flag in radiotap
Fix a regression introduced by commit a5e70697d0 ("mac80211: add radiotap flag
and handling for 5/10 MHz") where the IEEE80211_CHAN_CCK channel type flag was
incorrectly replaced by the IEEE80211_CHAN_OFDM flag. This commit fixes that by
using the CCK flag again.

Cc: stable@vger.kernel.org
Fixes: a5e70697d0 ("mac80211: add radiotap flag and handling for 5/10 MHz")
Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-23 10:53:58 +01:00