To support interrupt affinity spreading mechanism,
this makes use of group_cpus_evenly() to create
an irq callback affinity mask for each virtqueue
of vdpa device. Then we will unify set_vq_affinity
callback to pass the affinity to the vdpa device driver.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20230323053043.35-4-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This introduces set/get_vq_affinity callbacks in
vdpa_config_ops to support virtqueue affinity
management for vdpa device drivers.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230323053043.35-3-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to the Virtio Specification, the Queue Size parameter of a
virtqueue corresponds to the maximum number of descriptors in that
queue, and it does not have to be a power of 2 for packed virtqueues.
However, the virtio_pci_modern driver enforced a power of 2 check for
virtqueue sizes, which is unnecessary and restrictive for packed
virtuqueue.
Split virtqueue still needs to check the virtqueue size is power_of_2
which has been done in vring_alloc_queue_split of the virtio_ring layer.
To validate this change, we tested various virtqueue sizes for packed
rings, including 128, 256, 512, 100, 200, 500, and 1000, with
CONFIG_PAGE_POISONING enabled, and all tests passed successfully.
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20230315185458.11638-2-feliu@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add const to make the read-only pointer parameters clear, similar to
many existing functions.
To implement this change, the commit also introduces the use of
`container_of_const` to implement `to_vvq`, which ensures the const-ness
of read-only parameters and avoids accidental modification of their
members.
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Message-Id: <20230310053428.3376-4-feliu@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to kernel coding style [1], defining inline functions is not
necessary and beneficial for simple functions. Hence clean up the code
by removing the inline keyword.
It is verified with GCC 12.2.0, the generated code with/without inline
is same. Additionally tested with pktgen and iperf, and verified the
result, the pps test results are the same in the cases of with/without
inline.
Iperf and pps of pktgen for virtio-net didn't change before and after
the change.
[1]
https://www.kernel.org/doc/html/v6.2-rc3/process/coding-style.html#the-inline-disease
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20230310053428.3376-3-feliu@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
device feature provisioning in ifcvf, mlx5
new SolidNET driver
support for zoned block device in virtio blk
numa support in virtio pmem
VIRTIO_F_RING_RESET support in vhost-net
more debugfs entries in mlx5
resume support in vdpa
completion batching in virtio blk
cleanup of dma api use in vdpa
now simulating more features in vdpa-sim
documentation, features, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmP0D98PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpV6IH/iecRgLMWWjp3n31IFdu31f/J4HpF7dczVjK
qtV98eJ1N2pkgeJkdCfmB5XszfvFBeAurrS7++FTHiJhrRfR3Z+2ml/Qtvh5DEyP
qxz6wOw6VVsi/txdUxM1wsxLeEmmzkmFdAmPM+FXeIjhWj76GOgy/4A3eaj6TgzV
W8ShsBve/UZ5qMOC3XbIscvdOrudHJ18tH90Tiz3NZfH1fAs5E4uWbU6Mrz9DJVr
canGvf4kAI9z8qram5HSgzPIXRJEYiF4q/eiStdtiiME8gL1mHLRZDNP1I1LeCAb
q6Q6RCRKi3Ek+LGdH6u+nR1Swu03N2b/g+vgKtv30kJo06oZVzw=
=EasV
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- device feature provisioning in ifcvf, mlx5
- new SolidNET driver
- support for zoned block device in virtio blk
- numa support in virtio pmem
- VIRTIO_F_RING_RESET support in vhost-net
- more debugfs entries in mlx5
- resume support in vdpa
- completion batching in virtio blk
- cleanup of dma api use in vdpa
- now simulating more features in vdpa-sim
- documentation, features, fixes all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits)
vdpa/mlx5: support device features provisioning
vdpa/mlx5: make MTU/STATUS presence conditional on feature bits
vdpa: validate device feature provisioning against supported class
vdpa: validate provisioned device features against specified attribute
vdpa: conditionally read STATUS in config space
vdpa: fix improper error message when adding vdpa dev
vdpa/mlx5: Initialize CVQ iotlb spinlock
vdpa/mlx5: Don't clear mr struct on destroy MR
vdpa/mlx5: Directly assign memory key
tools/virtio: enable to build with retpoline
vringh: fix a typo in comments for vringh_kiov
vhost-vdpa: print warning when vhost_vdpa_alloc_domain fails
scsi: virtio_scsi: fix handling of kmalloc failure
vdpa: Fix a couple of spelling mistakes in some messages
vhost-net: support VIRTIO_F_RING_RESET
vhost-scsi: convert sysfs snprintf and sprintf to sysfs_emit
vdpa: mlx5: support per virtqueue dma device
vdpa: set dma mask for vDPA device
virtio-vdpa: support per vq dma device
vdpa: introduce get_vq_dma_device()
...
This patch adds the support of per vq dma device for virito-vDPA. vDPA
parents then are allowed to use different DMA devices. This is useful
for the parents that have software or emulated virtqueues.
Reviewed-by: Eli Cohen <elic@nvidia.com>
Tested-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230119061525.75068-4-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces a per virtqueue dma device. This will be used
for virtio devices whose virtqueue are backed by different underlayer
devices.
One example is the vDPA that where the control virtqueue could be
implemented through software mediation.
Some of the work are actually done before since the helper like
vring_dma_device(). This work left are:
- Let vring_dma_device() return the per virtqueue dma device instead
of the vdev's parent.
- Allow passing a dma_device when creating the virtqueue through a new
helper, old vring creation helper will keep using vdev's parent.
Reviewed-by: Eli Cohen <elic@nvidia.com>
Tested-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230119061525.75068-2-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace sprintf with sysfs_emit or its variants for their
built-in PAGE_SIZE awareness.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Message-Id: <TYCP286MB23232A999FE7DBDF50BA0FAACA0F9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtio_crypto use max_data_queues+1 to setup vqs,
we use vp_modern_get_num_queues to protect the vq range in setup_vq.
We could enter index >= vp_modern_get_num_queues(mdev) in setup_vq
if common->num_queues is not set well,and it return -ENOENT.
It is better to use -EINVAL instead.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Message-Id: <20221101111655.1947-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use helper function is_power_of_2() to check if num is power of two.
Minor readability improvement.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Message-Id: <20221021062734.228881-3-shaoqin.huang@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Use helper function is_power_of_2() to check if num is power of two.
Minor readability improvement.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Message-Id: <20221021062734.228881-2-shaoqin.huang@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
commit 71491c54ea ("virtio_pci: don't try to use intxif pin is zero")
breaks virtio_pci on powerpc, when running as a qemu guest.
vp_find_vqs() bails out because pci_dev->pin == 0.
But pci_dev->irq is populated correctly, so vp_find_vqs_intx() would
succeed if we called it - which is what the code used to do.
This seems to happen because pci_dev->pin is not populated in
pci_assign_irq(). A PCI core bug? Maybe.
However Linus said:
I really think that that is basically the only time you should use
that 'pci_dev->pin' thing: it basically exists not for "does this
device have an IRQ", but for "what is the routing of this irq on this
device".
and
The correct way to check for "no irq" doesn't use NO_IRQ at all, it just does
if (dev->irq) ...
so let's just check irq and be done with it.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: 71491c54ea ("virtio_pci: don't try to use intxif pin is zero")
Cc: "Angus Chen" <angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221012220312.308522-1-mst@redhat.com>
linux-next for a couple of months without, to my knowledge, any negative
reports (or any positive ones, come to that).
- Also the Maple Tree from Liam R. Howlett. An overlapping range-based
tree for vmas. It it apparently slight more efficient in its own right,
but is mainly targeted at enabling work to reduce mmap_lock contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
(https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com).
This has yet to be addressed due to Liam's unfortunately timed
vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down to
the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support
file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA
joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf
bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU=
=xfWx
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
The background is that we use dpu in cloud computing,the arch is x86,80
cores. We will have a lots of virtio devices,like 512 or more.
When we probe about 200 virtio_blk devices,it will fail and
the stack is printed as follows:
[25338.485128] virtio-pci 0000:b3:00.0: virtio_pci: leaving for legacy driver
[25338.496174] genirq: Flags mismatch irq 0. 00000080 (virtio418) vs. 00015a00 (timer)
[25338.503822] CPU: 20 PID: 5431 Comm: kworker/20:0 Kdump: loaded Tainted: G OE --------- - - 4.18.0-305.30.1.el8.x86_64
[25338.516403] Hardware name: Inspur NF5280M5/YZMB-00882-10E, BIOS 4.1.21 08/25/2021
[25338.523881] Workqueue: events work_for_cpu_fn
[25338.528235] Call Trace:
[25338.530687] dump_stack+0x5c/0x80
[25338.534000] __setup_irq.cold.53+0x7c/0xd3
[25338.538098] request_threaded_irq+0xf5/0x160
[25338.542371] vp_find_vqs+0xc7/0x190
[25338.545866] init_vq+0x17c/0x2e0 [virtio_blk]
[25338.550223] ? ncpus_cmp_func+0x10/0x10
[25338.554061] virtblk_probe+0xe6/0x8a0 [virtio_blk]
[25338.558846] virtio_dev_probe+0x158/0x1f0
[25338.562861] really_probe+0x255/0x4a0
[25338.566524] ? __driver_attach_async_helper+0x90/0x90
[25338.571567] driver_probe_device+0x49/0xc0
[25338.575660] bus_for_each_drv+0x79/0xc0
[25338.579499] __device_attach+0xdc/0x160
[25338.583337] bus_probe_device+0x9d/0xb0
[25338.587167] device_add+0x418/0x780
[25338.590654] register_virtio_device+0x9e/0xe0
[25338.595011] virtio_pci_probe+0xb3/0x140
[25338.598941] local_pci_probe+0x41/0x90
[25338.602689] work_for_cpu_fn+0x16/0x20
[25338.606443] process_one_work+0x1a7/0x360
[25338.610456] ? create_worker+0x1a0/0x1a0
[25338.614381] worker_thread+0x1cf/0x390
[25338.618132] ? create_worker+0x1a0/0x1a0
[25338.622051] kthread+0x116/0x130
[25338.625283] ? kthread_flush_work_fn+0x10/0x10
[25338.629731] ret_from_fork+0x1f/0x40
[25338.633395] virtio_blk: probe of virtio418 failed with error -16
The log :
"genirq: Flags mismatch irq 0. 00000080 (virtio418) vs. 00015a00 (timer)"
was printed because of the irq 0 is used by timer exclusive,and when
vp_find_vqs call vp_find_vqs_msix and returns false twice (for
whatever reason), then it will call vp_find_vqs_intx as a fallback.
Because vp_dev->pci_dev->irq is zero, we request irq 0 with
flag IRQF_SHARED, and get a backtrace like above.
According to PCI spec about "Interrupt Pin" Register (Offset 3Dh):
"The Interrupt Pin register is a read-only register that identifies the
legacy interrupt Message(s) the Function uses. Valid values are 01h, 02h,
03h, and 04h that map to legacy interrupt Messages for INTA,
INTB, INTC, and INTD respectively. A value of 00h indicates that the
Function uses no legacy interrupt Message(s)."
So if vp_dev->pci_dev->pin is zero, we should not request legacy
interrupt.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220930000915.548-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add some spaces to vring_alloc_queue(make it look prettier).
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Message-Id: <20220926183306.4535-1-wangdeming@inspur.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The operators of vring_alloc_queue_split should use the unified style.Add
space for the '|' ,make it be looked more pretty.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Message-Id: <20220926022202.1516-1-wangdeming@inspur.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If vring doesn't use the DMA API, KMSAN is unable to tell whether the
memory is initialized by hardware. Explicitly call kmsan_handle_dma()
from vring_map_one_sg() in this case to prevent false positives.
Link: https://lkml.kernel.org/r/20220915150417.722975-23-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix variable names in some kerneldocs, naming in others.
Add kerneldocs for struct vring_desc and vring_interrupt.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Message-Id: <20220810094004.1250-2-ricardo.canuelo@collabora.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
This reverts commit a10fba0377: the
proposed API isn't supported on all transports but no
effort was made to address this.
It might not be hard to fix if we want to: maybe just
rename size to size_hint and make sure legacy
transports ignore the hint.
But it's not sure what the benefit is in any case, so
let's drop it.
Fixes: a10fba0377 ("virtio: find_vqs() add arg sizes")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-8-mst@redhat.com>
This reverts commit 99e8927d8a:
proposed API isn't supported on all transports but no
effort was made to address this.
It might not be hard to fix if we want to: maybe just rename size to
size_hint and make sure legacy transports ignore the hint.
But it's not sure what the benefit is in any case, so let's drop it.
Fixes: 99e8927d8a ("virtio_vdpa: support the arg sizes of find_vqs()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-6-mst@redhat.com>
This reverts commit cdb44806fc: the legacy
path is wrong and in fact can not support the proposed API since for a
legacy device we never communicate the vq size to the hypervisor.
Reported-by: Andres Freund <andres@anarazel.de>
Fixes: cdb44806fc ("virtio_pci: support the arg sizes of find_vqs()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-5-mst@redhat.com>
This reverts commit fbed86abba.
The API is now unused, let's not carry dead code around.
Fixes: fbed86abba ("virtio_mmio: support the arg sizes of find_vqs()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-4-mst@redhat.com>
A huge patchset supporting vq resize using the
new vq reset capability.
Features, fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmL2F9APHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp00QIAKpxyu+zCtrdDuh68DsNn1Cu0y0PXG336ySy
MA1ck/bv94MZBIbI/Bnn3T1jDmUqTFHJiwaGz/aZ5gGAplZiejhH5Ds3SYjHckaa
MKeJ4FTXin9RESP+bXhv4BgZ+ju3KHHkf1jw3TAdVKQ7Nma1u4E6f8nprYEi0TI0
7gLUYenqzS7X1+v9O3rEvPr7tSbAKXYGYpV82sSjHIb9YPQx5luX1JJIZade8A25
mTt5hG1dP1ugUm1NEBPQHjSvdrvO3L5Ahy0My2Bkd77+tOlNF4cuMPt2NS/6+Pgd
n6oMt3GXqVvw5RxZyY8dpknH5kofZhjgFyZXH0l+aNItfHUs7t0=
=rIo2
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- A huge patchset supporting vq resize using the new vq reset
capability
- Features, fixes, and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
vdpa/mlx5: Fix possible uninitialized return value
vdpa_sim_blk: add support for discard and write-zeroes
vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
vdpa_sim_blk: check if sector is 0 for commands other than read or write
vdpa_sim: Implement suspend vdpa op
vhost-vdpa: uAPI to suspend the device
vhost-vdpa: introduce SUSPEND backend feature bit
vdpa: Add suspend operation
virtio-blk: Avoid use-after-free on suspend/resume
virtio_vdpa: support the arg sizes of find_vqs()
vhost-vdpa: Call ida_simple_remove() when failed
vDPA: fix 'cast to restricted le16' warnings in vdpa.c
vDPA: !FEATURES_OK should not block querying device config space
vDPA/ifcvf: support userspace to query features and MQ of a management device
vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
vhost scsi: Allow user to control num virtqueues
vhost-scsi: Fix max number of virtqueues
vdpa/mlx5: Support different address spaces for control and data
vdpa/mlx5: Implement susupend virtqueue callback
...
Virtio vdpa support the new parameter sizes of find_vqs().
Signed-off-by: Bo Liu <liubo03@inspur.com>
Message-Id: <20220810085151.7251-1-liubo03@inspur.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's possible that dev_set_name() returns -ENOMEM, catch and handle this.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Message-Id: <20220707031751.4802-1-liubo03@inspur.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Virtio MMIO support the new parameter sizes of find_vqs().
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-36-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtio PCI supports new parameter sizes of find_vqs().
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-35-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
find_vqs() adds a new parameter sizes to specify the size of each vq
vring.
NULL as sizes means that all queues in find_vqs() use the maximum size.
A value in the array is 0, which means that the corresponding queue uses
the maximum size.
In the split scenario, the meaning of size is the largest size, because
it may be limited by memory, the virtio core will try a smaller size.
And the size is power of 2.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-34-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch implements virtio pci support for QUEUE RESET.
Performing reset on a queue is divided into these steps:
1. notify the device to reset the queue
2. recycle the buffer submitted
3. reset the vring (may re-alloc)
4. mmap vring to device, and enable the queue
This patch implements virtio_reset_vq(), virtio_enable_resetq() in the
pci scenario.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-33-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vp_active_vq() to configure vring to backend after vq attach
vring. And configure vq vector if necessary.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-32-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a new member reset to the structure virtqueue to determine
whether the current vq is in the reset state. Subsequent patches will
use it.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-29-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch allows the new introduced
__virtqueue_break()/__virtqueue_unbreak() to break/unbreak the
virtqueue.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-27-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce virtqueue_resize() to implement the resize of vring.
Based on these, the driver can dynamically adjust the size of the vring.
For example: ethtool -G.
virtqueue_resize() implements resize based on the vq reset function. In
case of failure to allocate a new vring, it will give up resize and use
the original vring.
During this process, if the re-enable reset vq fails, the vq can no
longer be used. Although the probability of this situation is not high.
The parameter recycle is used to recycle the buffer that is no longer
used.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-25-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio ring packed supports resize.
Only after the new vring is successfully allocated based on the new num,
we will release the old vring. In any case, an error is returned,
indicating that the vring still points to the old vring.
In the case of an error, re-initialize(by virtqueue_reinit_packed()) the
virtqueue to ensure that the vring can be used.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-24-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a function to initialize vq without allocating new ring,
desc_state, desc_extra.
Subsequent patches will call this function after reset vq to
reinitialize vq.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-23-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Separate the logic of attach vring, the subsequent patch will call it
separately.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-22-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Separate the logic of initializing vring, and subsequent patches will
call it separately.
This function completes the variable initialization of packed vring. It
together with the logic of atatch constitutes the initialization of
vring.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-21-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Separate the logic for alloc desc_state and desc_extra, which will
be called separately by subsequent patches.
Use struct vring_packed to pass desc_state, desc_extra.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-20-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Separate the logic of packed to create vring queue.
This feature is required for subsequent virtuqueue reset vring.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-19-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Free the structure struct vring_vritqueue_packed.
Subsequent patches require it.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-18-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio ring split supports resize.
Only after the new vring is successfully allocated based on the new num,
we will release the old vring. In any case, an error is returned,
indicating that the vring still points to the old vring.
In the case of an error, re-initialize(virtqueue_reinit_split()) the
virtqueue to ensure that the vring can be used.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-17-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In vring_alloc_queue_split() save vring_align, may_reduce_num to
structure vring_virtqueue_split. Used to create a new vring when
implementing resize.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-16-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a function to initialize vq without allocating new ring,
desc_state, desc_extra.
Subsequent patches will call this function after reset vq to
reinitialize vq.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-15-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Separate the logic of attach vring, subsequent patches will call it
separately.
virtqueue_vring_init_split() completes the initialization of other
variables of vring split. We can directly use
vq->split = *vring_split to complete attach.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-14-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Separate the logic of initializing vring, and subsequent patches will
call it separately.
This function completes the variable initialization of split vring. It
together with the logic of atatch constitutes the initialization of
vring.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-13-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Separate the logic of creating desc_state, desc_extra, and subsequent
patches will call it independently.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-12-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Separate the logic of split to create vring queue.
This feature is required for subsequent virtuqueue reset vring.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-11-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
